| Year |
Citation |
Score |
| 2019 |
Audd C, Davidson BD, Ratcliffe JG, Czabaj MW. Reexamination of the edge crack torsion test for determining the mode III delamination toughness of laminated composites Engineering Fracture Mechanics. 215: 138-150. DOI: 10.1016/J.Engfracmech.2019.05.007 |
0.513 |
|
| 2017 |
Singh AK, Davidson BD, Zehnder AT, Hasseldine BP. An analytical model for the response of carbon/epoxy-aluminum honeycomb core sandwich structures under quasi-static indentation loading Journal of Sandwich Structures & Materials. 21: 1930-1952. DOI: 10.1177/1099636217738709 |
0.395 |
|
| 2017 |
Horner AL, Davidson BD. Energy release rate prediction for delamination versus echelon crack advance under global mode III loadings International Journal of Fracture. 207: 161-179. DOI: 10.1007/S10704-017-0226-Y |
0.562 |
|
| 2016 |
Czabaj MW, Davidson BD. Determination of the mode I, mode II, and mixed-mode I-II delamination toughness of a graphite/polyimide composite at room and elevated temperatures Journal of Composite Materials. 50: 2235-2253. DOI: 10.1177/0021998315602945 |
0.42 |
|
| 2016 |
Hasseldine BPJ, Zehnder AT, Keating BD, Singh AK, Davidson BD. Compressive strength of aluminum honeycomb core sandwich panels with thick carbon-epoxy facesheets subjected to barely visible indentation damage Journal of Composite Materials. 50: 387-402. DOI: 10.1177/0021998315575748 |
0.412 |
|
| 2015 |
Davidson BD. Standardization of the end-notched flexure test for mode II interlaminar fracture toughness determination of unidirectional laminated composites Journal of Testing and Evaluation. 43: 1540-1553. DOI: 10.1520/Jte20140437 |
0.483 |
|
| 2015 |
Horner AL, Davidson BD. Fracture surface evolution and apparent delamination toughness in split composite beam specimens subjected to mixed mode I-III loading Composites Part a: Applied Science and Manufacturing. 79: 92-102. DOI: 10.1016/J.Compositesa.2015.09.021 |
0.553 |
|
| 2014 |
Czabaj MW, Zehnder AT, Davidson BD, Singh AK. Compressive strength of honeycomb-stiffened graphite/epoxy sandwich panels with barely-visible indentation damage Journal of Composite Materials. 48: 2455-2471. DOI: 10.1177/0021998313499949 |
0.387 |
|
| 2014 |
Johnston AL, Davidson BD. Intrinsic coupling of near-tip matrix crack formation to mode III delamination advance in laminated polymeric matrix composites International Journal of Solids and Structures. 51: 2360-2369. DOI: 10.1016/J.Ijsolstr.2014.03.007 |
0.547 |
|
| 2014 |
Allison JL, Ohnston, Czabaj MW, Davidson BD, Ratcliffe JG. Three-dimensional crack surface evolution in mode iii delamination toughness tests Proceedings of the American Society For Composites - 29th Technical Conference, Asc 2014; 16th Us-Japan Conference On Composite Materials; Astm-D30 Meeting. DOI: 10.1016/J.Engfracmech.2015.07.013 |
0.531 |
|
| 2014 |
Horner AL, Czabaj MW, Davidson BD, Ratcliffe JG. Three-dimensional crack surface evolution in mode III delamination toughness tests Engineering Fracture Mechanics. DOI: 10.1016/j.engfracmech.2015.07.013 |
0.422 |
|
| 2014 |
Czabaj MW, Ratcliffe JG, Davidson BD. Observation of intralaminar cracking in the edge crack torsion specimen Engineering Fracture Mechanics. 120: 1-14. DOI: 10.1016/J.Engfracmech.2014.03.002 |
0.549 |
|
| 2014 |
Johnston AL, Davidson BD, Simon KK. Assessment of split-beam-type tests for mode III delamination toughness determination International Journal of Fracture. 185: 31-48. DOI: 10.1007/S10704-013-9897-1 |
0.566 |
|
| 2014 |
Davidson BD. Standardization of the end-notched flexure test for mode II delamination toughness determination of unidirectional laminated composites Proceedings of the American Society For Composites - 29th Technical Conference, Asc 2014; 16th Us-Japan Conference On Composite Materials; Astm-D30 Meeting. |
0.395 |
|
| 2013 |
Hasseldine BPJ, Zehnder AT, Keating BD, Singh AK, Davidson BD. Compression after impact of thick sandwich composite structures Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. DOI: 10.2514/6.2013-1550 |
0.326 |
|
| 2013 |
Singh AK, Davidson BD, Eisenberg DP, Czabaj MW, Zehnder AT. Damage characterization of quasi-statically indented composite sandwich structures Journal of Composite Materials. 47: 1211-1229. DOI: 10.1177/0021998312446500 |
0.316 |
|
| 2012 |
Johnston AL, Davidson BD, Simon KK. Evaluation of new test methods for the determination of giiic of laminated polymeric composites 27th Annual Technical Conference of the American Society For Composites 2012, Held Jointly With 15th Joint Us-Japan Conference On Composite Materials and Astm-D30 Meeting. 120-139. |
0.417 |
|
| 2011 |
Singh AK, Davidson BD. Effects of temperature, seawater and impact on the strength, stiffness, and life of sandwich composites Journal of Reinforced Plastics and Composites. 30: 269-277. DOI: 10.1177/0731684410393053 |
0.418 |
|
| 2011 |
Davidson BD, Sediles FO. Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test Composites Part a: Applied Science and Manufacturing. 42: 589-603. DOI: 10.1016/J.Compositesa.2011.01.018 |
0.522 |
|
| 2010 |
Davidson BD, Teller SS. Recommendations for an ASTM standardized test for determining G IIc of unidirectional laminated polymeric matrix composites Journal of Astm International. 7. DOI: 10.1520/Jai102619 |
0.564 |
|
| 2010 |
Czabaj MW, Zehnder AT, Davidson BD, Singh AK, Eisenberg DP. Compression after impact of sandwich composite structures: Experiments and modeling Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.339 |
|
| 2010 |
Davidson BD, Sediles FO, Humphreys KD. A shear-torsion-bending test for mixed-mode I-II-III delamination toughness determination 25th Technical Conference of the American Society For Composites and 14th Us-Japan Conference On Composite Materials 2010. 2: 1001-1020. |
0.431 |
|
| 2010 |
Davidson BD, Singh AK. Effects of subzero temperatures, seawater immersion and low velocity impact on flexural strength, stiffness and life of sandwich composites 25th Technical Conference of the American Society For Composites and 14th Us-Japan Conference On Composite Materials 2010. 1: 518-532. |
0.305 |
|
| 2009 |
Davidson BD, Soffa MA, Kumar M. Temperature and moisture effects in a particulate interlayered composite: Mode i data reduction and toughness Journal of Reinforced Plastics and Composites. 28: 2049-2068. DOI: 10.1177/0731684408090844 |
0.434 |
|
| 2009 |
Davidson BD, Bansal A, Qida Bing, Xuekun Sun. Geometrically nonlinear determination of energy release rate and mode ratio in single leg bending tests Journal of Reinforced Plastics and Composites. 28: 1881-1901. DOI: 10.1177/0731684408089235 |
0.555 |
|
| 2009 |
Davidson BD, Kumar M, Soffa MA. Influence of mode ratio and hygrothermal condition on the delamination toughness of a thermoplastic particulate interlayered carbon/epoxy composite Composites Part a: Applied Science and Manufacturing. 40: 67-79. DOI: 10.1016/J.Compositesa.2008.10.006 |
0.443 |
|
| 2008 |
Davidson BD, Bansal A, Bing Q, Sun X. Linear and nonlinear finite element analyses of unidirectional, symmetric single leg four-point bending tests Engineering Fracture Mechanics. 75: 2130-2143. DOI: 10.1016/J.Engfracmech.2007.10.009 |
0.494 |
|
| 2007 |
Davidson BD, Zhao W. An accurate mixed-mode delamination failure criterion for laminated fibrous composites requiring limited experimental input Journal of Composite Materials. 41: 679-702. DOI: 10.1177/0021998306071031 |
0.475 |
|
| 2007 |
Davidson BD, Sun X, Vinciquerra AJ. Influences of friction, geometric nonlinearities, and fixture compliance on experimentally observed toughnesses from three and four-point bend end-notched flexure tests Journal of Composite Materials. 41: 1177-1196. DOI: 10.1177/0021998306067304 |
0.498 |
|
| 2006 |
Perez CL, Davidson BD. Evaluation of precracking methods for the end-notched flexure test Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 2: 883-897. DOI: 10.2514/1.24188 |
0.534 |
|
| 2006 |
Davidson BD, Sun X. Geometry and data reduction recommendations for a standardized end notched flexure test for unidirectional composites Journal of Astm International. 3. DOI: 10.1520/Jai100285 |
0.464 |
|
| 2006 |
Sun X, Davidson BD. Numerical evaluation of the effects of friction and geometric nonlinearities on the energy release rate in three- and four-point bend end-notched flexure tests Engineering Fracture Mechanics. 73: 1343-1361. DOI: 10.1016/J.Engfracmech.2005.11.007 |
0.515 |
|
| 2006 |
Davidson BD, Bialaszewski RD, Sainath SS. A non-classical, energy release rate based approach for predicting delamination growth in graphite reinforced laminated polymeric composites Composites Science and Technology. 66: 1479-1496. DOI: 10.1016/J.Compscitech.2004.10.031 |
0.489 |
|
| 2006 |
Davidson BD. Towards an ASTM standardized test for determining G IIc of unidirectional laminated polymeric matrix composites American Society For Composites - 21st Technical Conference of the American Society For Composites 2006. 1: 49-66. |
0.414 |
|
| 2005 |
Davidson BD, Sun X. Effects of friction, geometry, and fixture compliance on the perceived toughness from three-and four-point bend end-notched flexure tests Journal of Reinforced Plastics and Composites. 24: 1611-1628. DOI: 10.1177/0731684405050402 |
0.477 |
|
| 2005 |
Davidson BD, Lijie YU. Energy release rate prediction in stiffened-skin structure using a three-dimensional crack tip element analysis Journal of Composite Materials. 39: 1819-1842. DOI: 10.1177/0021998305051802 |
0.505 |
|
| 2005 |
Sun X, Davidson BD. A direct energy balance approach for determining energy release rates in three and four point bend end notched flexure tests International Journal of Fracture. 135: 51-72. DOI: 10.1007/S10704-005-3746-9 |
0.543 |
|
| 2005 |
Davidson BD, Yu L, Lundberg SD, Rao LM. Accuracy assessment of a three-dimensional, crack tip element based approach for predicting delamination growth in stiffened-skin geometries International Journal of Fracture. 132: 1-32. DOI: 10.1007/S10704-004-8155-Y |
0.659 |
|
| 2004 |
Vinciquerra AJ, Davidson BD. Effect of crack length measurement technique and data reduction procedures on the perceived toughness from four-point bend end-notched flexure tests Journal of Reinforced Plastics and Composites. 23: 1051-1062. DOI: 10.1177/0731684404035413 |
0.484 |
|
| 2002 |
Vinciquerra AJ, Davidson BD, Schaff JR, Smith SL. Determination of the mode II fatigue delamination toughness of laminated composites Journal of Reinforced Plastics and Composites. 21: 663-677. DOI: 10.1177/0731684402021007473 |
0.544 |
|
| 2001 |
Polaha JJ, Davidson BD. Test procedures for determining the delamination toughness of ceramic matrix composites as a function of mode ratio, temperature, and layup Astm Special Technical Publication. 31-47. DOI: 10.1520/Stp15004S |
0.41 |
|
| 2001 |
Yu L, Davidson BD. A three-dimensional crack tip element for energy release rate determination in layered elastic structures Journal of Composite Materials. 35: 457-488. DOI: 10.1177/002199801772662118 |
0.662 |
|
| 2001 |
Gratz KR, Davidson BD. A combined tension-bending test for assessing mixed-mode delamination growth predictions 19th Aiaa Applied Aerodynamics Conference. |
0.46 |
|
| 2001 |
Gratz KR, Davidson BD. A combined tension-bending test for assessing mixed-mode delamination growth predictions 19th Aiaa Applied Aerodynamics Conference. |
0.46 |
|
| 2000 |
Schuecker C, Davidson BD. Effect of friction on the perceived mode II delamination toughness from three- and four-point bend end-notched flexure tests Astm Special Technical Publication. 334-344. DOI: 10.1520/Stp14518S |
0.584 |
|
| 2000 |
Davidson BD, Yu L, Hu H. Determination of energy release rate and mode mix in three-dimensional layered structures using plate theory International Journal of Fracture. 105: 81-104. DOI: 10.1023/A:1007672131026 |
0.632 |
|
| 2000 |
Davidson BD, Gharibian SJ, Yu L. Evaluation of energy release rate-based approaches for predicting delamination growth in laminated composites International Journal of Fracture. 105: 343-365. DOI: 10.1023/A:1007647226760 |
0.679 |
|
| 2000 |
Schuecker C, Davidson BD. Evaluation of the accuracy of the four-point bend end-notched flexure test for mode II delamination toughness determination Composites Science and Technology. 60: 2137-2146. DOI: 10.1016/S0266-3538(00)00113-5 |
0.51 |
|
| 1999 |
Martin RH, Davidson BD. Mode II fracture toughness evaluation using four point bend, end notched flexure test Plastics, Rubber and Composites Processing and Applications. 28: 401-406. DOI: 10.1179/146580199101540565 |
0.531 |
|
| 1999 |
Davidson BD, Koudela KL. Influence of the mode mix of precracking on the delamination toughness of laminated composites Journal of Reinforced Plastics and Composites. 18: 1408-1414. DOI: 10.1177/073168449901801504 |
0.487 |
|
| 1998 |
Pieracci A, Davidson BD, Sundararaman V. Nonlinear Analyses of Homogeneous, Symmetrically Delaminated Single Leg Bending Specimens Journal of Composites Technology and Research. 20: 170-178. DOI: 10.1520/Ctr10849J |
0.441 |
|
| 1998 |
Hudson RC, Davidson BD, Polaha JJ. Effect of Remote Ply Orientation on the Perceived Mode I and Mode II Toughness of θ/θ and θ/-θ Interfaces Applied Composite Materials. 5: 123-138. DOI: 10.1023/A:1008881508329 |
0.452 |
|
| 1998 |
Sundararaman V, Davidson BD. An unsymmetric end-notched flexure test for interfacial fracture toughness determination Engineering Fracture Mechanics. 60: 361-377. DOI: 10.1016/S0013-7944(98)00017-4 |
0.576 |
|
| 1997 |
Bhashyam S, Davidson BD. Evaluation of data reduction methods for the mixed mode bending test Aiaa Journal. 35: 546-552. DOI: 10.2514/6.1996-1419 |
0.457 |
|
| 1997 |
Bhashyam S, Davidson BD. Evaluation of Data Reduction Methods Aiaa Journal. 35: 546-552. DOI: 10.2514/2.129 |
0.485 |
|
| 1997 |
Schaff JR, Davidson BD. A strength-based wearout model for predicting the life of composite structures Astm Special Technical Publication. 1285: 179-200. DOI: 10.1520/Stp19928S |
0.4 |
|
| 1997 |
Davidson BD, Fariello PL, Hudson RC, Sundararaman V. Accuracy assessment of the singular-field-based mode-mix decomposition procedure for the prediction of delamination Astm Special Technical Publication. 1242: 109-128. DOI: 10.1520/Stp18272S |
0.526 |
|
| 1997 |
Schaff JR, Davidson BD. Life Prediction Methodology for Composite Structures. Part II—Spectrum Fatigue: Journal of Composite Materials. 31: 158-181. DOI: 10.1177/002199839703100203 |
0.412 |
|
| 1997 |
Schaff JR, Davidson BD. Life prediction methodology for composite structures. Part I - Constant amplitude and two-stress level fatigue Journal of Composite Materials. 31: 128-157. DOI: 10.1177/002199839703100202 |
0.359 |
|
| 1997 |
Sundararaman V, Davidson BD. An unsymmetric double cantilever beam test for interfacial fracture toughness determination International Journal of Solids and Structures. 34: 799-817. DOI: 10.1016/S0020-7683(96)00055-8 |
0.534 |
|
| 1997 |
Schaff JR, Davidson BD. Life prediction methodology for composite structures. Part II - Spectrum fatigue Journal of Composite Materials. 31: 158-181. |
0.311 |
|
| 1996 |
Davidson BD. Analytical determination of mixed-mode energy release rates for delamination using a crack tip element Key Engineering Materials. 120: 161-180. DOI: 10.4028/Www.Scientific.Net/Kem.120-121.161 |
0.571 |
|
| 1996 |
Bhashyam S, Davidson BD. An evaluation of data reduction methods for the mixed mode bending test 37th Aiaa/Asme/Asce/Ahs/Asc Structure, Structural Dynamics and Materials Conference. 886-896. DOI: 10.2514/6.1996-1419 |
0.315 |
|
| 1996 |
Davidson BD, Altonen CS, Polaha JJ. Effect of stacking sequence on delamination toughness and delamination growth behavior in composite end-notched flexure specimens Astm Special Technical Publication. 1274: 393-413. DOI: 10.1520/Stp16556S |
0.486 |
|
| 1996 |
Polaha JJ, Davidson BD, Hudson RC, Pieracci A. Effects of mode ratio, ply orientation and precracking on the delamination toughness of a laminated composite Journal of Reinforced Plastics and Composites. 15: 141-173. DOI: 10.1177/073168449601500202 |
0.442 |
|
| 1996 |
Davidson BD, Hu H, Yan H. An efficient procedure for determining mixed-mode energy release rates in practical problems of delamination Finite Elements in Analysis and Design. 23: 193-210. DOI: 10.1016/S0168-874X(96)80007-2 |
0.528 |
|
| 1996 |
Davidson BD, Krüger R, König M. Effect of stacking sequence on energy release rate distributions in multidirectional DCB and ENF specimens Engineering Fracture Mechanics. 55: 557-569. DOI: 10.1016/S0013-7944(96)00037-9 |
0.454 |
|
| 1996 |
Davidson BD, Sundararaman V. A single leg bending test for interfacial fracture toughness determination International Journal of Fracture. 78: 193-210. DOI: 10.1007/Bf00034525 |
0.552 |
|
| 1995 |
Davidson BD, Kruger R, König M. Three dimensional analysis and resulting design recommendations for unidirectional and multidirectional end-notched flexure tests Journal of Composite Materials. 29: 2108-2133. DOI: 10.1177/002199839502901602 |
0.553 |
|
| 1995 |
Davidson BD, Krafchak TM. A Comparison of Energy Release Rates for Locally Buckled Laminates Containing Symmetrically and Asymmetrically Located Delaminations Journal of Composite Materials. 29: 700-713. DOI: 10.1177/002199839502900601 |
0.527 |
|
| 1995 |
Davidson BD, Hu H, Schapery RA. Analytical crack-tip element for layered elastic structures Journal of Applied Mechanics, Transactions Asme. 62: 294-305. DOI: 10.1115/1.2895931 |
0.563 |
|
| 1995 |
Davidson BD, Krüger R, König M. Three-dimensional analysis of center-delaminated unidirectional and multidirectional single-leg bending specimens Composites Science and Technology. 54: 385-394. DOI: 10.1016/0266-3538(95)00069-0 |
0.496 |
|
| 1995 |
Davidson BD, Hu H. Effect of interlayer modulus on fracture mode ratio for interleaved composite laminates Engineering Fracture Mechanics. 52: 243-253. DOI: 10.1016/0013-7944(95)00016-O |
0.476 |
|
| 1994 |
Davidson BD. Energy Release Rate Determination for Edge Delamination under Combined in-Plane, Bending and Hygrothermal Loading. Part II-Two Symmetrically Located Delaminations Journal of Composite Materials. 28: 1371-1392. DOI: 10.1177/002199839402801405 |
0.573 |
|
| 1994 |
Davidson BD. Energy Release Rate Determination for Edge Delamination under Combined In-Plane, Bending and Hygrothermal Loading. Part I-Delamination at a Single Interface Journal of Composite Materials. 28: 1009-1031. DOI: 10.1177/002199839402801102 |
0.561 |
|
| 1994 |
Davidson BD, Ferrie CH. Effect of stretching-shearing coupling on instability-related delamination growth Composite Structures. 29: 383-392. DOI: 10.1016/0263-8223(94)90106-6 |
0.502 |
|
| 1994 |
Davidson BD, Petra JM. Effect of an open hole on the compression fatigue behavior of composite tubes Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 2: 792-802. |
0.315 |
|
| 1993 |
Davidson BD, Krafchak TM. Analysis of instability-related delamination growth using a crack tip element Aiaa Journal. 31: 2130-2136. DOI: 10.2514/3.11900 |
0.559 |
|
| 1991 |
Davidson BD. Delamination Buckling: Theory and Experiment Journal of Composite Materials. 25: 1351-1378. DOI: 10.1177/002199839102501007 |
0.39 |
|
| 1990 |
Davidson BD. An Analytical Investigation of Delamination Front Curvature in Double Cantilever Beam Specimens Journal of Composite Materials. 24: 1124-1137. DOI: 10.1177/002199839002401101 |
0.449 |
|
| 1990 |
Schapery RA, Davidson BD. Prediction of Energy Release Rate for Mixed-Mode Delamination Using Classical Plate Theory Applied Mechanics Reviews. 43. DOI: 10.1115/1.3120829 |
0.447 |
|
| 1990 |
Davidson BD, Schapery RA. A technique for predicting mode I energy release rates using a first-order shear deformable plate theory Engineering Fracture Mechanics. 36: 157-165. DOI: 10.1016/0013-7944(90)90105-P |
0.553 |
|
| 1988 |
Davidson BD, Schapery RA. Effect of Finite Width on Deflection and Energy Release Rate of an Orthotropic Double Cantilever Specimen Journal of Composite Materials. 22: 640-656. DOI: 10.1177/002199838802200704 |
0.51 |
|
| Show low-probability matches. |