Year |
Citation |
Score |
2019 |
Kim S, Kim J, Joung Y, Ahn S, Choi J, Koo C. Optimization of selective laser-induced etching (SLE) for fabrication of 3D glass microfluidic device with multi-layer micro channels Micro and Nano Systems Letters. 7: 1-7. DOI: 10.1186/S40486-019-0094-5 |
0.332 |
|
2018 |
Ha B, Ahn S, Bae H, Kang H, Kim J, Noh J. Fast and direct engraving of iridescent lettering on original product surface using laser interference to prevent counterfeiting Optics and Lasers in Engineering. 107: 214-220. DOI: 10.1016/J.Optlaseng.2018.03.024 |
0.308 |
|
2018 |
Cao BX, Hoang PL, Ahn S, Kim J, Kang H, Noh J. Real-time laser focusing system for high-precision micromachining using diffractive beam sampler and advanced image sensor Optics and Lasers in Engineering. 107: 13-20. DOI: 10.1016/J.Optlaseng.2018.03.002 |
0.359 |
|
2018 |
Ahn S, Choi J, Noh J, Cho S. High aspect ratio nanoholes in glass generated by femtosecond laser pulses with picosecond intervals Optics and Lasers in Engineering. 101: 85-88. DOI: 10.1016/J.Optlaseng.2017.10.002 |
0.348 |
|
2018 |
Kim H, Choi W, Ji S, Shin Y, Jeon J, Ahn S, Cho S. Morphologies of femtosecond laser ablation of ITO thin films using gaussian or quasi-flat top beams for OLED repair Applied Physics A. 124: 123. DOI: 10.1007/S00339-018-1553-1 |
0.348 |
|
2017 |
Park IY, Ahn S, Kim Y, Bae HS, Kang HS, Yoo J, Noh J. Serial number coding and decoding by laser interference direct patterning on the original product surface for anti-counterfeiting. Optics Express. 25: 14644-14653. PMID 28789048 DOI: 10.1364/Oe.25.014644 |
0.351 |
|
2017 |
Cao BX, Hoang PL, Ahn S, Kim JO, Kang H, Noh J. In-Situ Real-Time Focus Detection during Laser Processing Using Double-Hole Masks and Advanced Image Sensor Software. Sensors (Basel, Switzerland). 17. PMID 28671566 DOI: 10.3390/S17071540 |
0.364 |
|
2017 |
Noh J, Xuan CB, Le P, Ahn S, Kang H, Kim J. Automatic real-time focus control system for laser processing using dynamic focusing optical system Optics Express. 25: 28427-28441. DOI: 10.6084/M9.Figshare.C.3882907.V1 |
0.371 |
|
2017 |
Lee D, Ahn S. Investigation of Laser Cutting Width of LiCoO2 Coated Aluminum for Lithium-Ion Batteries Applied Sciences. 7: 914. DOI: 10.3390/App7090914 |
0.342 |
|
2017 |
Cao BX, Hoang PL, Ahn S, Kim J, Noh J. High-precision detection of focal position on a curved surface for laser processing Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 50: 204-210. DOI: 10.1016/J.Precisioneng.2017.05.008 |
0.348 |
|
2016 |
Cao BX, Hoang P, Ahn S, Kim JO, Sohn H, Noh J. Real-time detection of focal position of workpiece surface during laser processing using diffractive beam samplers Optics and Lasers in Engineering. 86: 92-97. DOI: 10.1016/J.Optlaseng.2016.05.008 |
0.36 |
|
2013 |
Yoo JH, Park JB, Ahn S, Grigoropoulos CP. Laser-induced direct graphene patterning and simultaneous transferring method for graphene sensor platform. Small (Weinheim An Der Bergstrasse, Germany). 9: 4269-75. PMID 23843243 DOI: 10.1002/Smll.201300990 |
0.436 |
|
2013 |
Chung J, Han S, Lee D, Ahn S, Grigoropoulos CP, Moon J, Ko SH. Nanosecond laser ablation of silver nanoparticle film Optical Engineering. 52: 024302. DOI: 10.1117/1.Oe.52.2.024302 |
0.527 |
|
2012 |
Ahn S, Hwang DJ, Park HK, Grigoropoulos CP. Femtosecond laser drilling of crystalline and multicrystalline silicon for advanced solar cell fabrication Applied Physics a: Materials Science and Processing. 108: 113-120. DOI: 10.1007/S00339-012-6932-4 |
0.507 |
|
Show low-probability matches. |