| Year |
Citation |
Score |
| 2022 |
Bahri H, Songmene V, Kouam J. Experimental Investigation on Part Quality and Dust Emission during Minimum Quantity Lubricated (MQL) Edge Finishing of Granite. Micromachines. 13. PMID 36296067 DOI: 10.3390/mi13101714 |
0.424 |
|
| 2022 |
Kouam J, Songmene V, Bahloul A, Samuel AM. Characterization of Si and SiO in Dust Emitted during Granite Polishing as a Function of Cutting Conditions. Materials (Basel, Switzerland). 15. PMID 35683263 DOI: 10.3390/ma15113965 |
0.343 |
|
| 2022 |
Tagiuri ZAM, Dao TM, Samuel AM, Songmene V. A Numerical Model for Predicting the Effect of Tool Nose Radius on Machining Process Performance during Orthogonal Cutting of AISI 1045 Steel. Materials (Basel, Switzerland). 15. PMID 35591703 DOI: 10.3390/ma15093369 |
0.414 |
|
| 2022 |
Alipour Sougavabar M, Niknam SA, Davoodi B, Songmene V. Milling Al520-MMC Reinforced with SiC Particles and Additive Elements Bi and Sn. Materials (Basel, Switzerland). 15. PMID 35208090 DOI: 10.3390/ma15041533 |
0.442 |
|
| 2021 |
Mohamed-Amine A, Mohamed D, Abdelhakim D, Songmene V. Predictive Analytical Modeling of Thermo-Mechanical Effects in Orthogonal Machining. Materials (Basel, Switzerland). 14. PMID 34947469 DOI: 10.3390/ma14247876 |
0.462 |
|
| 2021 |
Bahri H, Songmene V, Kouam J, Samuel AM, Samuel FH. CNC Edge Finishing of Granite: Effect of Machining Conditions on Part Quality, Cutting Forces, and Particle Emissions. Materials (Basel, Switzerland). 14. PMID 34772022 DOI: 10.3390/ma14216496 |
0.463 |
|
| 2021 |
Elgnemi T, Songmene V, Kouam J, Jun MBG, Samuel AM. Experimental Investigation on Dry Routing of CFRP Composite: Temperature, Forces, Tool Wear, and Fine Dust Emission. Materials (Basel, Switzerland). 14. PMID 34640092 DOI: 10.3390/ma14195697 |
0.485 |
|
| 2021 |
Javidikia M, Sadeghifar M, Songmene V, Jahazi M. Low and High Speed Orthogonal Cutting of AA6061-T6 under Dry and Flood-Coolant Modes: Tool Wear and Residual Stress Measurements and Predictions. Materials (Basel, Switzerland). 14. PMID 34361485 DOI: 10.3390/ma14154293 |
0.372 |
|
| 2021 |
Elgnemi TS, Jun MB, Songmene V, Samuel AM. Milling Performance of CFRP Composite and Atomised Vegetable Oil as a Function of Fiber Orientation. Materials (Basel, Switzerland). 14. PMID 33923912 DOI: 10.3390/ma14082062 |
0.331 |
|
| 2020 |
Chaieb O, Olufayo OA, Songmene V, Jahazi M. Investigation on Surface Quality of a Rapidly Solidified Al-50%Si Alloy Component for Deep-Space Applications. Materials (Basel, Switzerland). 13. PMID 32756338 DOI: 10.3390/Ma13153412 |
0.457 |
|
| 2020 |
Tran DS, Songmene V, Ngo AD, Kouam J, Rodriguez-Uribe A, Misra M, Mohanty AK. Experimental Investigation on Machinability of Polypropylene Reinforced with Miscanthus Fibers and Biochar. Materials (Basel, Switzerland). 13. PMID 32155813 DOI: 10.3390/Ma13051181 |
0.577 |
|
| 2020 |
Yeganefar A, Niknam SA, Songmene V. Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 Transactions of the Canadian Society For Mechanical Engineering. 44: 427-439. DOI: 10.1139/Tcsme-2019-0215 |
0.355 |
|
| 2020 |
Olufayo O, Songmene V, Kenné J, Ayomoh M. Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels International Journal of Production Research. 1-20. DOI: 10.1080/00207543.2020.1778207 |
0.532 |
|
| 2020 |
Sadeghifar M, Javidikia M, Songmene V, Jahazi M. Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions Simulation Modelling Practice and Theory. 104: 102141. DOI: 10.1016/J.Simpat.2020.102141 |
0.536 |
|
| 2020 |
Javidikia M, Sadeghifar M, Songmene V, Jahazi M. Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization The International Journal of Advanced Manufacturing Technology. 1-15. DOI: 10.1007/S00170-020-06027-W |
0.426 |
|
| 2020 |
Shnfir M, Kouam J, Songmene V. Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel The International Journal of Advanced Manufacturing Technology. 110: 617-627. DOI: 10.1007/S00170-020-05869-8 |
0.528 |
|
| 2020 |
Bédard F, Jahazi M, Songmene V. Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics The International Journal of Advanced Manufacturing Technology. 107: 333-342. DOI: 10.1007/S00170-020-05109-Z |
0.531 |
|
| 2020 |
Javidikia M, Sadeghifar M, Songmene V, Jahazi M. On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study The International Journal of Advanced Manufacturing Technology. 106: 4547-4565. DOI: 10.1007/S00170-020-04945-3 |
0.418 |
|
| 2019 |
Shnfir M, Olufayo OA, Jomaa W, Songmene V. Machinability Study of Hardened 1045 Steel When Milling with Ceramic Cutting Inserts. Materials (Basel, Switzerland). 12. PMID 31801217 DOI: 10.3390/Ma12233974 |
0.563 |
|
| 2019 |
Olufayo OA, Che H, Songmene V, Katsari C, Yue S. Machinability of Rene 65 Superalloy. Materials (Basel, Switzerland). 12. PMID 31242585 DOI: 10.3390/Ma12122034 |
0.568 |
|
| 2019 |
Niknam SA, Tiabi A, Songmene V. Burr edge occupancy: edge finishing index for milling machined parts Transactions of the Canadian Society For Mechanical Engineering. 43: 248-255. DOI: 10.1139/Tcsme-2018-0066 |
0.529 |
|
| 2019 |
Javadi H, Jomaa W, Songmene V, Brochu M, Bocher P. Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning International Journal of Precision Engineering and Manufacturing. 20: 1297-1310. DOI: 10.1007/S12541-019-00145-6 |
0.408 |
|
| 2019 |
Niknam SA, Saberi M, Kouam J, Hashemi R, Songmene V, Balazinski M. Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) Journal of Central South University. 26: 1563-1572. DOI: 10.1007/S11771-019-4112-9 |
0.718 |
|
| 2019 |
Marani M, Songmene V, Zeinali M, Kouam J, Zedan Y. Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al–20 Mg2Si–2Cu metal matrix composite using additives Neural Computing and Applications. 32: 8115-8126. DOI: 10.1007/S00521-019-04314-6 |
0.528 |
|
| 2019 |
Saidi MN, Songmene V, Kouam J, Bahloul A. Study of surface quality and dust particles emission and dispersion during dry polishing of granite The International Journal of Advanced Manufacturing Technology. 104: 4675-4684. DOI: 10.1007/S00170-019-04166-3 |
0.434 |
|
| 2019 |
Ajaja J, Jomaa W, Bocher P, Chromik RR, Songmene V, Brochu M. Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel The International Journal of Advanced Manufacturing Technology. 104: 141-157. DOI: 10.1007/S00170-019-03863-3 |
0.48 |
|
| 2018 |
Panjota FG, Songmene V, Kenné J, Olufayo OA, Ayomoh M. Development of a Tool Cost Optimization Model for Stochastic Demand of Machined Products Applied Mathematics. 9: 1395-1423. DOI: 10.4236/Am.2018.912091 |
0.478 |
|
| 2018 |
Kibouka GR, Nganga-Kouya D, Kenné J, Polotski V, Songmene V. Maintenance and setup planning in manufacturing systems under uncertainties Journal of Quality in Maintenance Engineering. 24: 170-184. DOI: 10.1108/Jqme-11-2016-0069 |
0.434 |
|
| 2018 |
Songmene V, Miazza A, Hechmi MA, Olufayo OA, Kouam J. Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission Procedia Cirp. 77: 139-142. DOI: 10.1016/J.Procir.2018.08.254 |
0.521 |
|
| 2018 |
Songmene V, Zaghbani I, Kientzy G. Machining and Machinability of Tool Steels: Effects of Lubrication and Machining Conditions on Tool Wear and Tool Life Data Procedia Cirp. 77: 505-508. DOI: 10.1016/J.Procir.2018.08.252 |
0.575 |
|
| 2018 |
Niknam SA, Kouam J, Songmene V, Balazinski M. Dry and Semi-Dry Turning of Titanium Metal Matrix Composites (Ti-MMCs) Procedia Cirp. 77: 62-65. DOI: 10.1016/J.Procir.2018.08.215 |
0.684 |
|
| 2018 |
Songmene V, Kouam J, Balhoul A. Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite Measurement. 114: 398-408. DOI: 10.1016/J.Measurement.2017.10.012 |
0.47 |
|
| 2018 |
Marani M, Songmene V, Kouam J, Zedan Y. Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg2Si-2Cu metal matrix composite with modifier elements The International Journal of Advanced Manufacturing Technology. 99: 789-802. DOI: 10.1007/S00170-018-2491-Y |
0.515 |
|
| 2018 |
Saidi MN, Songmene V, Kouam J, Bahloul A. Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion The International Journal of Advanced Manufacturing Technology. 98: 289-303. DOI: 10.1007/S00170-018-2247-8 |
0.412 |
|
| 2018 |
Sadeghifar M, Sedaghati R, Jomaa W, Songmene V. A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions The International Journal of Advanced Manufacturing Technology. 96: 3747-3791. DOI: 10.1007/S00170-018-1759-6 |
0.468 |
|
| 2017 |
Jomaa W, Songmene V, Bocher P, Gakwaya A. FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 Solid State Phenomena. 261: 347-353. DOI: 10.4028/Www.Scientific.Net/Ssp.261.347 |
0.47 |
|
| 2017 |
Jomaa W, Songmene V, Bocher P. Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals Machining Science and Technology. 21: 335-361. DOI: 10.1080/10910344.2017.1283956 |
0.528 |
|
| 2017 |
Barzani MM, Farahany S, Songmene V. Machinability characteristics, thermal and mechanical properties of Al-Mg 2 Si in-situ composite with bismuth Measurement. 110: 263-274. DOI: 10.1016/J.Measurement.2017.06.028 |
0.458 |
|
| 2017 |
Elgnemi T, Ahmadi K, Songmene V, Nam J, Jun MB. Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite Journal of Manufacturing Processes. 30: 133-140. DOI: 10.1016/J.Jmapro.2017.09.011 |
0.482 |
|
| 2017 |
Niknam SA, Davoodi B, Davim JP, Songmene V. Mechanical deburring and edge-finishing processes for aluminum parts—a review The International Journal of Advanced Manufacturing Technology. 95: 1101-1125. DOI: 10.1007/S00170-017-1288-8 |
0.541 |
|
| 2017 |
Sadeghifar M, Sedaghati R, Jomaa W, Songmene V. Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel The International Journal of Advanced Manufacturing Technology. 94: 2457-2474. DOI: 10.1007/S00170-017-1032-4 |
0.437 |
|
| 2017 |
Niknam SA, Balazinski M, Songmene V. To characterize and optimize the surface quality attributes in slot milling operation The International Journal of Advanced Manufacturing Technology. 93: 727-746. DOI: 10.1007/S00170-017-0460-5 |
0.659 |
|
| 2017 |
Khettabi R, Nouioua M, Djebara A, Songmene V. Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys The International Journal of Advanced Manufacturing Technology. 92: 2593-2598. DOI: 10.1007/S00170-017-0339-5 |
0.6 |
|
| 2016 |
Mandatsy Moungomo JB, Nganga Kouya D, Songmene V. Turning and Drilling Machinability of Recycled Aluminum Alloys Key Engineering Materials. 710: 77-82. DOI: 10.4028/Www.Scientific.Net/Kem.710.77 |
0.576 |
|
| 2016 |
Mandatsy Moungomo JB, Nganga Kouya D, Songmene V. Aluminium Machining Chips Formation, Treatment & Recycling: A Review Key Engineering Materials. 710: 71-76. DOI: 10.4028/Www.Scientific.Net/Kem.710.71 |
0.555 |
|
| 2016 |
Zoghlami M, Jahazi M, Songmene V. The Effects of Friction Stir Welding Parameters on the Characteristics of Banded Structure for Aluminum Alloys Key Engineering Materials. 710: 155-159. DOI: 10.4028/Www.Scientific.Net/Kem.710.155 |
0.358 |
|
| 2016 |
Niknam SA, Kouam J, Songmene V. Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy International Journal of Machining and Machinability of Materials. 18: 120-137. DOI: 10.1504/Ijmmm.2016.075469 |
0.58 |
|
| 2016 |
Kibouka GR, Nganga-Kouya D, Kenne JP, Songmene V, Polotski V. Production Planning of a Failure-Prone Manufacturing System under Different Setup Scenarios Journal of Applied Mathematics. 2016. DOI: 10.1155/2016/4930817 |
0.372 |
|
| 2016 |
Jomaa W, Songmene V, Bocher P. An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel Materials and Manufacturing Processes. 31: 838-844. DOI: 10.1080/10426914.2015.1070431 |
0.468 |
|
| 2016 |
Jomaa W, Songmene V, Bocher P. An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations Journal of Materials Engineering and Performance. 1-18. DOI: 10.1007/S11665-016-1950-6 |
0.453 |
|
| 2016 |
Moungomo JBM, Nganga-Kouya D, Songmene V, Kouam J, Kenné JP. Machinability study of recycled aluminum cans and machining chips International Journal of Advanced Manufacturing Technology. 1-16. DOI: 10.1007/S00170-016-8564-X |
0.538 |
|
| 2015 |
Songmene V, Njoya Doko R. Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites Materials Science Forum. 828: 381-388. DOI: 10.4028/Www.Scientific.Net/Msf.828-829.381 |
0.56 |
|
| 2015 |
Niknam SA, Songmene V. Milling burr formation, modeling and control: A review Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 229: 893-909. DOI: 10.1177/0954405414534827 |
0.375 |
|
| 2015 |
Saidi MN, Songmene V, Kouam J, Bahloul A. Experimental investigation on fine particle emission during granite polishing process International Journal of Advanced Manufacturing Technology. 81: 2109-2121. DOI: 10.1007/S00170-015-7303-Z |
0.528 |
|
| 2015 |
Kouam J, Songmene V, Balazinski M, Hendrick P. Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy International Journal of Advanced Manufacturing Technology. 79: 1325-1334. DOI: 10.1007/S00170-015-6940-6 |
0.728 |
|
| 2014 |
Jomaa W, Songmene V, Bocher P. Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials (Basel, Switzerland). 7: 1603-1624. PMID 28788534 DOI: 10.3390/Ma7031603 |
0.503 |
|
| 2014 |
Kouam J, Djebara A, Songmene V. Experimental Investigation on the Effect of Pre-holes on Drilling Process Performance of Aluminum Alloys: Forces, Surface Finish and Dust Emission Advances in Materials Science and Applications. 3: 13-23. DOI: 10.5963/AMSA0301003 |
0.307 |
|
| 2014 |
Kouedeu AF, Kenné J, Dejax P, Songmene V, Polotski V. Production Planning of a Failure-Prone Manufacturing/Remanufacturing System with Production-Dependent Failure Rates Applied Mathematics. 5: 1557-1572. DOI: 10.4236/Am.2014.510149 |
0.42 |
|
| 2014 |
Kamguem R, Tahan AS, Songmene V. Surface Roughness Estimation of Turned Parts from Optical Image Measurements and Wavelet Decomposition International Journal of Materials Forming and Machining Processes. 1: 48-72. DOI: 10.4018/ijmfmp.2014010104 |
0.334 |
|
| 2014 |
Jomaa W, Songmene V, Bocher P. Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 Materials. 7: 1603-1624. DOI: 10.3390/ma7031603 |
0.414 |
|
| 2014 |
Daoud M, Jomaa W, Chatelain JF, Bouzid A, Songmene V. Identification of material constitutive law constants using machining tests: A response surface methodology based approach Wit Transactions On the Built Environment. 137: 25-36. DOI: 10.2495/Hpsm140031 |
0.528 |
|
| 2014 |
Jomaa W, Daoud M, Songmene V, Bocher P, Châtelain JF. Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2014-39503 |
0.375 |
|
| 2014 |
Niknam SA, Songmene V. Analysis of friction and burr formation in slot milling Procedia Cirp. 17: 755-759. DOI: 10.1016/J.Procir.2014.02.032 |
0.512 |
|
| 2014 |
Kouedeu AF, Kenné JP, Dejax P, Songmene V, Polotski V. Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach International Journal of Advanced Manufacturing Technology. 76: 1607-1619. DOI: 10.1007/S00170-014-6175-Y |
0.308 |
|
| 2014 |
Niknam SA, Songmene V. Analytical modelling of slot milling exit burr size International Journal of Advanced Manufacturing Technology. 73: 421-432. DOI: 10.1007/S00170-014-5758-Y |
0.423 |
|
| 2014 |
Niknam SA, Wygowski W, Balazinksi M, Songmene V. Milling Burr Formation and Avoidance Machinability of Advanced Materials. 57-93. DOI: 10.1002/9781118576854.ch2 |
0.32 |
|
| 2013 |
Djebara A, Songmene V, Bahloul A. Effects of machining conditions on specific surface of PM<sub>2.5</sub> emitted during metal cutting Health. 5: 36-43. DOI: 10.4236/Health.2013.510A2005 |
0.544 |
|
| 2013 |
Kouam J, Songmene V, Balhoul A. Experimental investigation on PM2.5 particle emission during polishing of granite Health. 5: 29-35. DOI: 10.4236/Health.2013.510A2004 |
0.42 |
|
| 2013 |
Kouedeu AF, Kenne JP, Dejax P, Songmene V, Polotski V. Analytical modelling and control of a hybrid manufacturing/remanufacturing system Ifac Proceedings Volumes (Ifac-Papersonline). 401-406. DOI: 10.3182/20130619-3-Ru-3018.00452 |
0.484 |
|
| 2013 |
Zedan Y, Songmene V, Kouam J, Masounave J. Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy International Journal of Machining and Machinability of Materials. 13: 231-252. DOI: 10.1504/Ijmmm.2013.053225 |
0.53 |
|
| 2013 |
Niknam SA, Songmene V. Factors governing burr formation during high-speed slot milling of wrought aluminum alloys Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227: 1165-1179. DOI: 10.1177/0954405413484725 |
0.439 |
|
| 2013 |
Zaghbani I, Songmene V, Bonev I. An experimental study on the vibration response of a robotic machining system Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227: 866-880. DOI: 10.1177/0954405413477067 |
0.378 |
|
| 2013 |
Niknam SA, Songmene V, Au YHJ. Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines Transactions of the Canadian Society For Mechanical Engineering. 37: 1105-1114. DOI: 10.1139/Tcsme-2013-0094 |
0.489 |
|
| 2013 |
Niknam SA, Songmene V. Experimental investigation and modeling of milling burrs Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/MSEC2013-1176 |
0.439 |
|
| 2013 |
Kouam J, Songmene V, Zedan Y, Djebara A, Khettabi R. On chip formation during drilling of cast aluminum alloys Machining Science and Technology. 17: 228-245. DOI: 10.1080/10910344.2013.780546 |
0.532 |
|
| 2013 |
Segonds S, Masounave J, Songmene V, Bès C. A simple analytical model for burr type prediction in drilling of ductile materials Journal of Materials Processing Technology. 213: 971-977. DOI: 10.1016/J.Jmatprotec.2012.11.030 |
0.325 |
|
| 2013 |
Khettabi R, Fatmi L, Masounave J, Songmene V. On the micro and nanoparticle emission during machining of titanium and aluminum alloys Cirp Journal of Manufacturing Science and Technology. 6: 175-180. DOI: 10.1016/J.Cirpj.2013.04.001 |
0.513 |
|
| 2013 |
Niknam SA, Songmene V. Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy International Journal of Precision Engineering and Manufacturing. 14: 1311-1320. DOI: 10.1007/S12541-013-0178-8 |
0.412 |
|
| 2013 |
Kamguem R, Tahan SA, Songmene V. Evaluation of machined part surface roughness using image texture gradient factor International Journal of Precision Engineering and Manufacturing. 14: 183-190. DOI: 10.1007/S12541-013-0026-X |
0.419 |
|
| 2013 |
Djebara A, Zedan Y, Kouam J, Songmene V. The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys Journal of Materials Engineering and Performance. 22: 3840-3853. DOI: 10.1007/S11665-013-0675-Z |
0.413 |
|
| 2013 |
Niknam SA, Songmene V, Au YHJ. The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines International Journal of Advanced Manufacturing Technology. 69: 2679-2689. DOI: 10.1007/S00170-013-5222-4 |
0.45 |
|
| 2013 |
Kamguem R, Djebara A, Songmene V. Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions International Journal of Advanced Manufacturing Technology. 69: 1283-1298. DOI: 10.1007/S00170-013-5105-8 |
0.595 |
|
| 2013 |
Niknam SA, Songmene V. Modeling of burr thickness in milling of ductile materials International Journal of Advanced Manufacturing Technology. 66: 2029-2039. DOI: 10.1007/S00170-012-4479-3 |
0.472 |
|
| 2013 |
Djebara A, Songmene V. Dry machining of aluminum alloys and air quality Proceedings of the 37th International Matador 2012 Conference. 135-139. |
0.473 |
|
| 2013 |
Jomaa W, Songmene V, Bocher P. On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 1: 94-103. |
0.37 |
|
| 2013 |
Songmene V, Njoya RD, Nkengue BT. Machining performance of a graphitic SiC-aluminium matrix composite Proceedings of the 37th International Matador 2012 Conference. 127-130. |
0.498 |
|
| 2013 |
Zedan Y, Songmene V, Khettabi R, Kouam J, Masounave J. Surface integrity of Al6061-T6 drilled in wet, semi-wet and dry conditions Proceedings of the 37th International Matador 2012 Conference. 131-134. |
0.327 |
|
| 2012 |
Songmene V, Khettabi R, Kouam J. Dry high-speed machining: A cost effective and green process International Journal of Manufacturing Research. 7: 229-256. DOI: 10.1504/Ijmr.2012.048695 |
0.546 |
|
| 2012 |
Zaghbani I, Chatelain JF, Berube S, Songmene V, Lance J. Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates International Journal of Machining and Machinability of Materials. 12: 337-357. DOI: 10.1504/Ijmmm.2012.050433 |
0.498 |
|
| 2012 |
Kamguem R, Songmene V, Kenne JP, Tahan SA. Vision-based surface roughness inspection of machined aluminium parts International Journal of Machining and Machinability of Materials. 12: 215-235. DOI: 10.1504/Ijmmm.2012.049256 |
0.506 |
|
| 2012 |
Zaghbani I, Chatelain JF, Songmene V, Bérubé S, Atarsia A. A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates Journal of Composite Materials. 46: 1955-1971. DOI: 10.1177/0021998311428362 |
0.358 |
|
| 2012 |
Zedan Y, Djebara A, Songmene V, Niknam SA. Burr size minimization when drilling 6061-t6 aluminum alloy Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 3: 1053-1059. DOI: 10.1115/IMECE2012-86412 |
0.448 |
|
| 2012 |
Niknam SA, Kamguem R, Songmene V. Analysis and optimization of exit burr size and surface roughness in milling using desirability function Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 3: 1797-1806. DOI: 10.1115/IMECE2012-86201 |
0.396 |
|
| 2012 |
Kouam J, Songmene V, Djebara A, Khettabi R. Effect of friction testing of metals on particle emission Journal of Materials Engineering and Performance. 21: 965-972. DOI: 10.1007/S11665-011-9972-6 |
0.417 |
|
| 2011 |
Djebara A, Khettabi R, Kouam J, Songmene V. Comparison of the capability of peak function in describing real condensation particle counter profiles Advanced Materials Research. 227: 96-100. DOI: 10.4028/Www.Scientific.Net/Amr.227.96 |
0.379 |
|
| 2011 |
Zaghbani I, Lamraoui M, Songmene V, Thomas M, El Badaoui M. Robotic high speed machining of aluminum alloys Advanced Materials Research. 188: 584-589. DOI: 10.4028/Www.Scientific.Net/Amr.188.584 |
0.48 |
|
| 2011 |
Khettabi R, Zaghbani I, Djebara A, Kouam J, Songmene V. A new sustainability model for machining processes International Journal of Business Continuity and Risk Management. 2: 187. DOI: 10.1504/Ijbcrm.2011.042299 |
0.521 |
|
| 2011 |
Balazinski M, Songmene V, Kishawy HA. Analyzing the machinability of metal matrix composites Machining Technology For Composite Materials: Principles and Practice. 394-411. DOI: 10.1016/B978-0-85709-030-0.50015-1 |
0.701 |
|
| 2011 |
Niknam SA, Tiabi A, Zaghbani I, Kamguem R, Songmene V. Milling burr size estimation using acoustic emission and cutting forces Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 3: 901-909. |
0.433 |
|
| 2010 |
Zaghbani I, Songmene V, Kientzy G, LeHuy H. Evaluation of sustainability of mould steels based on machinability data International Journal of Machining and Machinability of Materials. 7: 58-81. DOI: 10.1504/Ijmmm.2010.029846 |
0.537 |
|
| 2010 |
Khettabi R, Songmene V, Masounave J. Effects of speeds, materials, and tool rake angles on metallic particle emission during orthogonal cutting Journal of Materials Engineering and Performance. 19: 767-775. DOI: 10.1007/S11665-009-9551-2 |
0.563 |
|
| 2010 |
Khettabi R, Songmene V, Zaghbani I, Masounave J. Modeling of particle emission during dry orthogonal cutting Journal of Materials Engineering and Performance. 19: 776-789. DOI: 10.1007/S11665-009-9538-Z |
0.54 |
|
| 2009 |
Balout B, Masounave J, Songmene V. Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy Journal of Materials Processing Technology. 209: 5955-5963. DOI: 10.1016/J.Jmatprotec.2009.07.014 |
0.327 |
|
| 2009 |
Zaghbani I, Songmene V. A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys Journal of Materials Processing Technology. 209: 2532-2544. DOI: 10.1016/J.Jmatprotec.2008.05.050 |
0.457 |
|
| 2009 |
Zaghbani I, Songmene V. Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis International Journal of Machine Tools and Manufacture. 49: 947-957. DOI: 10.1016/J.Ijmachtools.2009.06.010 |
0.528 |
|
| 2009 |
Zaghbani I, Songmene V, Khettabi R. Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy Journal of Materials Engineering and Performance. 18: 38-48. DOI: 10.1007/S11665-008-9265-X |
0.491 |
|
| 2007 |
Parent L, Songmene V, Kenné JP. A generalised model for optimising an end milling operation Production Planning and Control. 18: 319-337. DOI: 10.1080/09537280701292501 |
0.476 |
|
| 2007 |
Balout B, Songmene V, Masounave J. An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials Journal of Manufacturing Processes. 9: 23-34. DOI: 10.1016/S1526-6125(07)70105-6 |
0.513 |
|
| 2007 |
Khettabi R, Songmene V, Masounave J. Effect of tool lead angle and chip formation mode on dust emission in dry cutting Journal of Materials Processing Technology. 193: 100-109. DOI: 10.1016/J.Jmatprotec.2007.04.005 |
0.545 |
|
| 2006 |
Balout B, Songmene V, Masounave J. Machinability of light alloys and composites during dry drilling Transactions of the Canadian Society For Mechanical Engineering. 30: 329-343. |
0.53 |
|
| 2004 |
Brunette J, Jeu-Hérault M, Songmene V, Masounave J. Understanding and characterizing the drilling of recycled plastics Machining Science and Technology. 8: 141-170. DOI: 10.1081/Mst-120034251 |
0.516 |
|
| 1999 |
Songmene V, Balazinski M. Machinability of graphitic metal matrix composites as a function of reinforcing particles Cirp Annals - Manufacturing Technology. 48: 77-80. DOI: 10.1016/S0007-8506(07)63135-7 |
0.66 |
|
| 1997 |
Bell JAE, Stephenson TF, Warner AEM, Songmene V. Physical properties of graphitic silicon carbide aluminum metal matrix composites Sae Technical Papers. DOI: 10.4271/970788 |
0.325 |
|
| 1995 |
Balazinski M, Songméné V, Kops L. Improvement of Tool Life through Variable Feed Milling of Inconel 600 Cirp Annals - Manufacturing Technology. 44: 55-58. DOI: 10.1016/S0007-8506(07)62274-4 |
0.612 |
|
| Show low-probability matches. |