| Year |
Citation |
Score |
| 2020 |
Xu H, Xu Y, He Y, Jiao H, Yue S, Li J. Influence of hot rolling reduction rate on the microstructure, texture and magnetic properties of a strip-cast Fe-6.5 wt% Si grain-oriented electrical steel Journal of Magnetism and Magnetic Materials. 494: 165755. DOI: 10.1016/J.Jmmm.2019.165755 |
0.803 |
|
| 2020 |
Xu H, Xu Y, He Y, Cheng S, Jiao H, Yue S, Li J. Two-stage warm cross rolling and its effect on the microstructure, texture and magnetic properties of an Fe-6.5 wt% Si non-oriented electrical steel Journal of Materials Science. 55: 12525-12543. DOI: 10.1007/S10853-020-04861-7 |
0.762 |
|
| 2019 |
Alidokht SA, Lengaigne J, Klemberg-Sapieha JE, Yue S, Chromik RR. Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior Journal of Materials Engineering and Performance. 28: 1532-1543. DOI: 10.1007/S11665-019-03956-W |
0.391 |
|
| 2017 |
Alidokht SA, Vo P, Yue S, Chromik RR. Erosive wear behavior of Cold-Sprayed Ni-WC composite coating Wear. 566-577. DOI: 10.1016/J.Wear.2017.01.052 |
0.363 |
|
| 2017 |
Sanjari M, Mehdi M, He Y, Hilinski EJ, Yue S, Kestens LAI, Edrisy A. Tracking the Evolution of Annealing Textures from Individual Deformed Grains in a Cross-Rolled Non-oriented Electrical Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 6013-6026. DOI: 10.1007/S11661-017-4370-9 |
0.77 |
|
| 2017 |
Sanjari M, He Y, Hilinski EJ, Yue S, Kestens LAI. Texture evolution during skew cold rolling and annealing of a non-oriented electrical steel containing 0.9 wt% silicon Journal of Materials Science. 52: 3281-3300. DOI: 10.1007/S10853-016-0616-Y |
0.763 |
|
| 2016 |
Sanjari M, Farkoosh AR, Kabir ASH, Su J, Jung IH, Yue S, Amirkhiz BS, He YL. The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during Annealing Materials Science Forum. 879: 542-547. DOI: 10.4028/Www.Scientific.Net/Msf.879.542 |
0.784 |
|
| 2016 |
Su J, Kabir ASH, Yue S. Effect of As-Rolled Microstructure on Static Recrystallization Characteristics and Texture Evolution during Annealing Materials Science Forum. 879: 1876-1881. DOI: 10.4028/Www.Scientific.Net/Msf.879.1876 |
0.558 |
|
| 2016 |
Sanjari M, He Y, Hilinski EJ, Yue S, Kestens LAI. Development of the {113}(uvw) texture during the annealing of a skew cold rolled non-oriented electrical steel Scripta Materialia. 124: 179-183. DOI: 10.1016/J.Scriptamat.2016.07.005 |
0.774 |
|
| 2016 |
Su J, Sanjari M, Kabir ASH, Jung IH, Yue S. Dynamic recrystallization mechanisms during high speed rolling of Mg-3Al-1Zn alloy sheets Scripta Materialia. 113: 198-201. DOI: 10.1016/J.Scriptamat.2015.10.040 |
0.538 |
|
| 2016 |
Su J, Abu AS, Sanjari M, Yue S. Correlation of static recrystallization and texture weakening of AZ31 magnesium alloy sheets subjected to high speed rolling Materials Science and Engineering A. 674: 343-360. DOI: 10.1016/J.Msea.2016.07.107 |
0.802 |
|
| 2016 |
Su J, Sanjari M, Kabir ASH, Jonas JJ, Yue S. Static recrystallization behavior of magnesium AZ31 alloy subjected to high speed rolling Materials Science and Engineering A. 662: 412-425. DOI: 10.1016/J.Msea.2016.03.047 |
0.664 |
|
| 2016 |
Hosseini SMK, Zarei-Hanzaki A, Yue S. Microstructure Development and Mechanical Properties of Low-Silicon-Content TRIP-Assisted Steels after Coiling Process Steel Research International. 87: 146-156. DOI: 10.1002/Srin.201400525 |
0.46 |
|
| 2015 |
Su J, Sanjari M, Kabir AS, Jung IH, Yue S. Static Recrystallization Characteristic of Low Temperature Rolled AZ31 Magnesium Alloy during Annealing Materials Science Forum. 239-243. DOI: 10.4028/Www.Scientific.Net/Msf.828-829.239 |
0.529 |
|
| 2015 |
Hosseini SMK, Zarei-Hanzaki A, Yue S. Effects of ferrite phase characteristics on microstructure and mechanical properties of thermomechanically-processed low-silicon content TRIP-assisted steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 626: 229-236. DOI: 10.1016/J.Msea.2014.12.063 |
0.482 |
|
| 2014 |
Hosseini SMK, Zaeri-Hanzaki A, Yue S. Effect of austenite deformation in non-recrystallization region on microstructure development in low-silicon content TRIP-assisted steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 618: 63-70. DOI: 10.1016/J.Msea.2014.08.059 |
0.458 |
|
| 2014 |
Su J, Kabir ASH, Jung I, Yue S. Deformation Behavior and Dynamic Recrystallization of Micro-Alloyed Mg-Al-Ca Alloys During High Temperature Deformation Magnesium Technology. 143-147. DOI: 10.1007/978-3-319-48231-6_30 |
0.527 |
|
| 2013 |
Hosseini SMK, Zarei-Hanzaki A, Yue S. The Effect of Intercritical Deformation on Microstructure Development in Thermomechanically-Processed Low-Silicon TRIP-Assisted Steels Advanced Materials Research. 856: 251-256. DOI: 10.4028/Www.Scientific.Net/Amr.856.251 |
0.46 |
|
| 2013 |
Su J, Kaboli S, Kabir ASH, Jung I, Yue S. Effect of dynamic precipitation and twinning on dynamic recrystallization of micro-alloyed Mg–Al–Ca alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 587: 27-35. DOI: 10.1016/J.Msea.2013.08.019 |
0.479 |
|
| 2012 |
Wong W, Irissou E, Legoux JG, Vo P, Yue S. Powder processing and coating heat treatment on cold sprayed Ti-6Al-4V alloy Materials Science Forum. 706: 258-263. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.258 |
0.382 |
|
| 2012 |
Anijdan SHM, Yue S. Effect of ferrite deformation temperature on the mechanical properties of microalloyed steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 535: 84-91. DOI: 10.1016/J.Msea.2011.12.045 |
0.455 |
|
| 2012 |
Anijdan SHM, Rezaeian A, Yue S. The effect of chemical composition and austenite conditioning on the transformation behavior of microalloyed steels Materials Characterization. 63: 27-38. DOI: 10.1016/J.Matchar.2011.11.003 |
0.531 |
|
| 2012 |
Anijdan SHM, Sediako D, Yue S. Optimization of flow stress in cool deformed Nb-microalloyed steel by combining strain induced transformation of retained austenite, cooling rate and heat treatment Acta Materialia. 60: 1221-1229. DOI: 10.1016/J.Actamat.2011.11.019 |
0.465 |
|
| 2012 |
Anijdan SHM, Yue S. The Effect of Cooling Rate, and Cool Deformation Through Strain-Induced Transformation, on Microstructural Evolution and Mechanical Properties of Microalloyed Steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 1140-1162. DOI: 10.1007/S11661-011-0958-7 |
0.544 |
|
| 2011 |
Anijdan SHM, Hoseini M, Yue S. Texture development in cool deformed microalloyed steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 6788-6793. DOI: 10.1016/J.Msea.2011.05.048 |
0.529 |
|
| 2010 |
Wong W, Rezaeian A, Irissou E, Legoux JG, Yue S. Cold Spray Characteristics of Commercially Pure Ti and Ti-6Al-4V Advanced Materials Research. 639-644. DOI: 10.4028/Www.Scientific.Net/Amr.89-91.639 |
0.331 |
|
| 2010 |
Vo P, Jahazi M, Yue S. FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 Advanced Materials Research. 89: 592-597. DOI: 10.4028/Www.Scientific.Net/Amr.89-91.592 |
0.449 |
|
| 2008 |
Qu J, Dabboussi W, Hassani F, Nemes J, Yue S. Effect of microstructure on the dynamic deformation behavior of dual phase steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 479: 93-104. DOI: 10.1016/J.Msea.2007.06.020 |
0.429 |
|
| 2008 |
Rezaeian A, Zarandi F, Yue S. Mechanism of Hot Ductility Improvement of a Peritectic Steel Containing Vanadium Using Very-High-Temperature Compression Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 39: 2635-2644. DOI: 10.1007/S11661-008-9614-2 |
0.547 |
|
| 2007 |
Shang L, Yue S, Essadiqi E, Javaid A, Carter JT, Verma R. Effect of Initial Microstructure under Different Solidification Conditions on Hot Working Behavior of AZ31 Alloy Materials Science Forum. 325-328. DOI: 10.4028/Www.Scientific.Net/Msf.561-565.325 |
0.496 |
|
| 2006 |
Zarandi F, Yue S. The Effect of Boron on Hot Ductility of Nb-microalloyed Steels Isij International. 46: 591-598. DOI: 10.2355/Isijinternational.46.591 |
0.48 |
|
| 2006 |
Khodabandeh AR, Jahazi M, Yue S, Aghdashi ST. The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts Materials and Manufacturing Processes. 21: 105-110. DOI: 10.1080/Amp-20060666 |
0.448 |
|
| 2006 |
Zarandi F, Yue S. Effect of boron on the hot ductility of the Nb-microalloyed steel in austenite region Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 2316-2320. DOI: 10.1007/Bf02586150 |
0.501 |
|
| 2005 |
Elwazri AM, Yue S. Effect of Pearlite Structure on the Mechanical Properties of Microalloyed Hypereutectoid Steels Materials Science Forum. 737-744. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.737 |
0.514 |
|
| 2005 |
Varano R, Elwazri AM, Siciliano F, Bai DQ, Gauvin R, Yue S. FE-SEM Study of Fine Nb Precipitates in Carbon Extraction Replicas Materials Science Forum. 663-668. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.663 |
0.363 |
|
| 2005 |
Elwazri AM, Bai DQ, Siciliano F, Yue S. Influence of Deformation and Coiling Temperature on Mechanical Properties of a High Strength Pipeline Steel Materials Science Forum. 597-604. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.597 |
0.496 |
|
| 2005 |
Rezaeian A, Zarandi F, Bai DQ, Yue S. Application of Deformation to Improve Hot Ductility in the Peritectic Steel Materials Science Forum. 203-210. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.203 |
0.45 |
|
| 2005 |
Zarandi F, Yue S. Effect of High Temperature Deformation on the Hot Ductility of Nb Microalloyed Steel Materials Science Forum. 115-122. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.115 |
0.497 |
|
| 2005 |
Zarandi F, Yue S. Improvement of Hot Ductility in the Nb-microalloyed Steel by High Temperature Deformation Isij International. 45: 686-693. DOI: 10.2355/Isijinternational.45.686 |
0.499 |
|
| 2005 |
Khodabandeh AR, Jahazi M, Yue S, Bocher P. Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel Isij International. 45: 272-280. DOI: 10.2355/Isijinternational.45.272 |
0.489 |
|
| 2005 |
Qu J, Dabboussi W, Hassani F, Nemes J, Yue S. Effect of microstructure on static and dynamic mechanical property of a dual phase steel studied by shear punch testing Isij International. 45: 1741-1746. DOI: 10.2355/Isijinternational.45.1741 |
0.455 |
|
| 2004 |
Zarandi F, Yue S. Mechanism for Loss of Hot Ductility Due to Deformation during Solidification in Continuous Casting of Steel Isij International. 44: 1705-1713. DOI: 10.2355/Isijinternational.44.1705 |
0.459 |
|
| 2002 |
Jeong B, Gauvin R, Yue S. EBSD Study of Martensite in a Dual Phase Steel Microscopy and Microanalysis. 8: 700-701. DOI: 10.1017/S1431927602106507 |
0.342 |
|
| 2002 |
Jeong B, Yue S, Gauvin R, Drew R. Microstructure of TiN Coatings by EBSD Techniques Microscopy and Microanalysis. 8: 674-675. DOI: 10.1017/S1431927602106374 |
0.311 |
|
| 2002 |
Elwazri AM, Gauvin R, Yue S. FE-SEM Examination of Microalloyed Hypereutectoid Steels Microscopy and Microanalysis. 8: 710-711. DOI: 10.1017/S1431927602106180 |
0.332 |
|
| 2001 |
Akhlaghi S, Yue S. Effect of Thermomechanical Processing on the Hot Ductility of a Nb–Ti Microalloyed Steel Isij International. 41: 1350-1356. DOI: 10.2355/Isijinternational.41.1350 |
0.433 |
|
| 1999 |
Wang A, Yue S, Bobyn JD, Chan FW, Medley JB. Surface characterization of metal-on-metal hip implants tested in a hip simulator Wear. 225: 708-715. DOI: 10.1016/S0043-1648(98)00384-6 |
0.341 |
|
| 1998 |
Bouet M, Root JH, Es-Sadiqi E, Yue S. The effect of Mo in Si-Mn Nb bearing TRIP steels Materials Science Forum. 319-326. DOI: 10.4028/Www.Scientific.Net/Msf.284-286.319 |
0.414 |
|
| 1998 |
Bai DQ, Chiro AD, Yue S. Stability of retained austenite in a Nb microalloyed Mn-Si TRIP steel Materials Science Forum. 253-262. DOI: 10.4028/Www.Scientific.Net/Msf.284-286.253 |
0.46 |
|
| 1997 |
Bourassa PL, Yue S, Bobyn JD. The effect of heat treatment on the fatigue strength of microknurled Ti-6Al-4V. Journal of Biomedical Materials Research. 37: 291-300. PMID 9358324 DOI: 10.1002/(Sici)1097-4636(199711)37:2<291::Aid-Jbm20>3.0.Co;2-G |
0.362 |
|
| 1997 |
Zarei-Hanzaki A, Yue S. Ferrite formation characteristics in Si-Mn TRIP steels Isij International. 37: 583-589. DOI: 10.2355/Isijinternational.37.583 |
0.469 |
|
| 1997 |
Gauvin R, Yue S. The Observation of NBC Precipitates In Steels In The Nanometer Range Using A Field Emission Gun Scanning Electron Microscope Microscopy and Microanalysis. 3: 1243-1244. DOI: 10.1017/S1431927600013106 |
0.322 |
|
| 1997 |
Gauvin R, Wanjara P, Drew RAL, Yue S. Characterization of the Interface in a TiC Reinforced Ti-6%A1-4%V Composite Using Monte Carlo Simulations and FEGSEM. Microscopy and Microanalysis. 3: 527-528. DOI: 10.1017/S1431927600009521 |
0.563 |
|
| 1997 |
Root JH, Wanjara P, Yue S, Drew R, Oddy A, McDill M, Marsiglio F, Fong RWL. Neutron diffraction for industry: Optimized processing, failure analysis and regulations Physica B: Condensed Matter. 241: 1181-1188. DOI: 10.1016/S0921-4526(97)00823-5 |
0.57 |
|
| 1997 |
Yue S, DiChiro A, Zarei-Hanzaki A. Thermomechanical Processing Effects On C-Mn-Si Trip Steels Jom. 49: 59-61. DOI: 10.1007/Bf02914353 |
0.423 |
|
| 1996 |
Wanjara P, Yue S, Drew RAL, Root JH, Donaberger R. Titanium-Based Composites Produced by Powder Metallurgy Key Engineering Materials. 415-422. DOI: 10.4028/Www.Scientific.Net/Kem.127-131.415 |
0.603 |
|
| 1994 |
Pandi R, Yue S. Dynamic Transformation of Austenite to Ferrite in Low Carbon Steel Isij International. 34: 270-279. DOI: 10.2355/Isijinternational.34.270 |
0.428 |
|
| 1993 |
Hodgson PD, Jonas JJ, Yue S. Strain Accumulation and Post-Dynamic Recrystallization in C-Mn Steels Materials Science Forum. 473-478. DOI: 10.4028/Www.Scientific.Net/Msf.113-115.473 |
0.525 |
|
| 1993 |
Roucoules C, Yue S, Jonas JJ. Microstructural Changes Following Dynamic Recrystallization in Microalloyed Austenite Materials Science Forum. 455-460. DOI: 10.4028/Www.Scientific.Net/Msf.113-115.455 |
0.557 |
|
| 1993 |
Najafi-Zadeh A, Jonas JJ, Yue S. Effect of Dynamic Recrystallization on Grain Refinement of IF Steels Materials Science Forum. 441-446. DOI: 10.4028/Www.Scientific.Net/Msf.113-115.441 |
0.659 |
|
| 1993 |
Cetlin PR, Jonas JJ, Yue S. Warm Working of Ferrite in the Simulated Rod Rolling of IF Steels Materials Science Forum. 405-410. DOI: 10.4028/Www.Scientific.Net/Msf.113-115.405 |
0.356 |
|
| 1993 |
Hanzaki AZ, Pandi R, Hodgson PD, Yue S. Continuous cooling deformation testing of steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 24: 2657-2665. DOI: 10.1007/Bf02659490 |
0.445 |
|
| 1992 |
Hodgson PD, Jonas JJ, Yue S. Growth during and after the Static and Metadynamic Recrystallization of Austenite Materials Science Forum. 715-722. DOI: 10.4028/Www.Scientific.Net/Msf.94-96.715 |
0.533 |
|
| Show low-probability matches. |
