Year |
Citation |
Score |
2020 |
Lee J, Son J, Zhou S, Chen Y. Variation Source Identification in Manufacturing Processes Using Bayesian Approach With Sparse Variance Components Prior Ieee Transactions On Automation Science and Engineering. 17: 1469-1485. DOI: 10.1109/Tase.2019.2959605 |
0.536 |
|
2018 |
Liu Y, Zhou S, Chen Y, Tang J. Measurements Selection for Bias Reduction in Structural Damage Identification Journal of Dynamic Systems, Measurement, and Control. 141. DOI: 10.1115/1.4041505 |
0.502 |
|
2018 |
Si W, Yang Q, Monplaisir L, Chen Y. Reliability Analysis of Repairable Systems With Incomplete Failure Time Data Ieee Transactions On Reliability. 67: 1043-1059. DOI: 10.1109/Tr.2018.2832022 |
0.716 |
|
2018 |
Si W, Yang Q, Wu X, Chen Y. Reliability analysis considering dynamic material local deformation Journal of Quality Technology. 50: 183-197. DOI: 10.1080/00224065.2018.1436834 |
0.7 |
|
2016 |
Wu J, Chen Y, Zhou S, Li X. Online Steady-State Detection for Process Control Using Multiple Change-Point Models and Particle Filters Ieee Transactions On Automation Science and Engineering. 13: 688-700. DOI: 10.1109/Tase.2014.2378150 |
0.523 |
|
2016 |
Wu J, Chen Y, Zhou S. Online detection of steady-state operation using a multiple-change-point model and exact Bayesian inference Iie Transactions (Institute of Industrial Engineers). 48: 599-613. DOI: 10.1080/0740817X.2015.1110268 |
0.543 |
|
2016 |
Li S, Chen Y. A Bayesian variable selection method for joint diagnosis of manufacturing process and sensor faults Iie Transactions. 48: 313-323. DOI: 10.1080/0740817X.2015.1109739 |
0.343 |
|
2016 |
Hou Y, Wu J, Chen Y. Online Steady State Detection Based on Rao‐Blackwellized Sequential Monte Carlo Quality and Reliability Engineering International. 32: 2667-2683. DOI: 10.1002/Qre.2067 |
0.326 |
|
2016 |
Das D, Chen Y, Zhou S, Sievenpiper C. Monitoring of multiple binary data streams using a hierarchical model structure Quality and Reliability Engineering International. 32: 1307-1319. DOI: 10.1002/Qre.1831 |
0.52 |
|
2015 |
Das D, Zhou S, Chen Y, Horst J. Statistical monitoring of over-dispersed multivariate count data using approximate likelihood ratio tests International Journal of Production Research. 1-15. DOI: 10.1080/00207543.2015.1126373 |
0.512 |
|
2012 |
Yang Q, Hong Y, Chen Y, Shi J. Failure Profile Analysis of Complex Repairable Systems With Multiple Failure Modes Ieee Transactions On Reliability. 61: 180-191. DOI: 10.1109/Tr.2011.2182225 |
0.677 |
|
2011 |
Yang Q, Chen Y. Monte Carlo Methods for Reliability Evaluation of Linear Sensor Systems Ieee Transactions On Reliability. 60: 305-314. DOI: 10.1109/Tr.2010.2103970 |
0.611 |
|
2011 |
Chen N, Chen Y, Li Z, Zhou S, Sievenpiper C. Optimal variability sensitive condition-based maintenance with a Cox PH model International Journal of Production Research. 49: 2083-2100. DOI: 10.1080/00207541003694811 |
0.554 |
|
2010 |
Yang Q, Chen Y. Reliability of Coordinate Sensor Systems Under the Risk of Sensor Precision Degradations Ieee Transactions On Automation Science and Engineering. 7: 291-302. DOI: 10.1109/Tase.2009.2018140 |
0.649 |
|
2010 |
Cho JJ, Ding Y, Chen Y, Tang J. Robust calibration for localization in clustered wireless sensor networks Ieee Transactions On Automation Science and Engineering. 7: 81-95. DOI: 10.1109/Tase.2009.2013475 |
0.301 |
|
2009 |
Yang Q, Chen Y. Sensor system reliability modeling and analysis for fault diagnosis in multistage manufacturing processes Iie Transactions. 41: 819-830. DOI: 10.1080/07408170902789035 |
0.662 |
|
2009 |
Li S, Chen Y. Sensor fault detection for manufacturing quality control Iie Transactions. 41: 605-614. DOI: 10.1080/07408170802389290 |
0.313 |
|
2007 |
Zantek P, Li S, Chen Y. Detecting multiple special causes from multivariate data with applications to fault detection in manufacturing Iie Transactions. 39: 771-782. DOI: 10.1080/07408170601089513 |
0.358 |
|
2006 |
Chen Y, Jin J. Quality-oriented-maintenance for multiple interactive tooling components in discrete manufacturing processes Ieee Transactions On Reliability. 55: 123-134. DOI: 10.1109/Tr.2005.864152 |
0.598 |
|
2006 |
Chen Y, Ding Y, Jin J, Ceglarek D. Integration of Process-Oriented Tolerancing and Maintenance Planning in Design of Multistation Manufacturing Processes Ieee Transactions On Automation Science and Engineering. 3: 440-453. DOI: 10.1109/Tase.2006.872105 |
0.697 |
|
2005 |
Ding Y, Zhou S, Chen Y. A comparison of process variation estimators for in-process dimensional measurements and control Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 127: 69-79. DOI: 10.1115/1.1870041 |
0.563 |
|
2005 |
Chen Y, Jin J. Quality-reliability chain modeling for system-reliability analysis of complex manufacturing processes Ieee Transactions On Reliability. 54: 475-488. DOI: 10.1109/Tr.2005.853441 |
0.573 |
|
2005 |
Chen Y, Yang Q. Reliability of two-stage weighted-k-out-of-n systems with components in common Ieee Transactions On Reliability. 54: 431-440. DOI: 10.1109/Tr.2005.853274 |
0.602 |
|
2005 |
Liu CQ, Ding Y, Chen Y. Optimal coordinate sensor placements for estimating mean and variance components of variation sources Iie Transactions. 37: 877-889. DOI: 10.1080/07408170590969889 |
0.346 |
|
2004 |
Zhou S, Chen Y, Shi J. Statistical estimation and testing for variation root-cause identification of multistage manufacturing processes Ieee Transactions On Automation Science and Engineering. 1: 73-83. DOI: 10.1109/Tase.2004.829427 |
0.65 |
|
2004 |
Chen Y, Jin J, Shi J. Integration of dimensional quality and locator reliability in design and evaluation of multi-station body-in-white assembly processes Iie Transactions. 36: 827-839. DOI: 10.1080/07408170490473015 |
0.647 |
|
2003 |
Zhou S, Chen Y, Ding Y, Shi J. Diagnosability study of multistage manufacturing processes based on linear mixed-effects models Technometrics. 45: 312-325. DOI: 10.1198/004017003000000131 |
0.636 |
|
2003 |
Chen Y, Jin J. Cost-variability-sensitive preventive maintenance considering management risk Iie Transactions. 35: 1091-1101. DOI: 10.1080/714044439 |
0.511 |
|
2001 |
Jin J(, Chen Y. Quality and reliability information integration for design evaluation of fixture system reliability Quality and Reliability Engineering International. 17: 355-372. DOI: 10.1002/Qre.416 |
0.344 |
|
Show low-probability matches. |