Brad L. Boyce, Ph.D. - Publications

Affiliations: 
2001 University of California, Berkeley, Berkeley, CA 
Area:
Materials Science Engineering, Mechanical Engineering, Aerospace Engineering

85 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2016 Bufford DC, Stauffer D, Mook WM, Syed Amanulla SA, Boyce BL, Hattar K. High Cycle Fatigue in the Transmission Electron Microscope. Nano Letters. PMID 27351706 DOI: 10.1021/acs.nanolett.6b01560  0.72
2016 Furnish TA, Boyce BL, Sharon JA, O'Brien CJ, Clark BG, Arrington CL, Pillars JR. Fatigue stress concentration and notch sensitivity in nanocrystalline metals Journal of Materials Research. 31: 740-752. DOI: 10.1557/jmr.2016.66  0.72
2016 Mohanty G, Wehrs J, Boyce BL, Taylor A, Hasegawa M, Philippe L, Michler J. Room temperature stress relaxation in nanocrystalline Ni measured by micropillar compression and miniature tension Journal of Materials Research. 31: 1085-1095. DOI: 10.1557/jmr.2016.101  0.72
2016 Boyce BL, Kramer SLB, Bosiljevac TR, Corona E, Moore JA, Elkhodary K, Simha CHM, Williams BW, Cerrone AR, Nonn A, Hochhalter JD, Bomarito GF, Warner JE, Carter BJ, Warner DH, et al. The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading International Journal of Fracture. 198: 5-100. DOI: 10.1007/s10704-016-0089-7  0.72
2016 Kramer SLB, Boyce BL. Preface to the special volume on the second Sandia Fracture Challenge International Journal of Fracture. 198. DOI: 10.1007/s10704-016-0087-9  0.72
2015 Battaile CC, Emery JM, Brewer LN, Boyce BL. Crystal plasticity simulations of microstructure-induced uncertainty in strain concentration near voids in brass Philosophical Magazine. 95: 1069-1079. DOI: 10.1080/14786435.2015.1009958  0.72
2015 Grutzik SJ, Milosevic E, Boyce BL, Zehnder AT. Oxide driven strength evolution of silicon surfaces Journal of Applied Physics. 118. DOI: 10.1063/1.4936118  0.72
2015 Buchheit TE, Carroll JD, Clark BG, Boyce BL. Evaluating Deformation-Induced Grain Orientation Change in a Polycrystal During In Situ Tensile Deformation using EBSD Microscopy and Microanalysis. DOI: 10.1017/S1431927615000677  0.72
2015 Lim H, Battaile CC, Carroll JD, Boyce BL, Weinberger CR. A physically based model of temperature and strain rate dependent yield in BCC metals: Implementation into crystal plasticity Journal of the Mechanics and Physics of Solids. 74: 80-96. DOI: 10.1016/j.jmps.2014.10.003  0.72
2015 Lim H, Carroll JD, Battaile CC, Boyce BL, Weinberger CR. Quantitative comparison between experimental measurements and CP-FEM predictions of plastic deformation in a tantalum oligocrystal International Journal of Mechanical Sciences. 92: 98-108. DOI: 10.1016/j.ijmecsci.2014.12.010  0.72
2015 Mathaudhu SN, Boyce BL. Thermal Stability: The Next Frontier for Nanocrystalline Materials Jom. 67: 2785-2787. DOI: 10.1007/s11837-015-1708-x  0.72
2015 Boyce BL, Furnish TA, Padilla HA, Van Campen D, Mehta A. Detecting rare, abnormally large grains by x-ray diffraction Journal of Materials Science. 50: 6719-6729. DOI: 10.1007/s10853-015-9226-3  0.72
2014 Brons JG, Hardwick JA, Padilla HA, Hattar K, Thompson GB, Boyce BL. The role of copper twin boundaries in cryogenic indentation-induced grain growth Materials Science and Engineering A. 592: 182-188. DOI: 10.1016/j.msea.2013.11.005  0.72
2014 Lim H, Carroll JD, Battaile CC, Buchheit TE, Boyce BL, Weinberger CR. Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals International Journal of Plasticity. 60: 1-18. DOI: 10.1016/j.ijplas.2014.05.004  0.72
2014 Bieler TR, Sutton SC, Dunlap BE, Keith ZA, Eisenlohr P, Crimp MA, Boyce BL. Grain boundary responses to heterogeneous deformation in tantalum polycrystals Jom. 66: 121-128. DOI: 10.1007/s11837-013-0821-y  0.72
2014 Boyce BL. Preface to the Special Issue on the Sandia Fracture Challenge International Journal of Fracture. 186: 1-3. DOI: 10.1007/s10704-014-9929-5  0.72
2014 Boyce BL, Kramer SLB, Fang HE, Cordova TE, Neilsen MK, Dion K, Kaczmarowski AK, Karasz E, Xue L, Gross AJ, Ghahremaninezhad A, Ravi-Chandar K, Lin SP, Chi SW, Chen JS, et al. The sandia fracture challenge: Blind round robin predictions of ductile tearing International Journal of Fracture. 186: 5-68. DOI: 10.1007/s10704-013-9904-6  0.72
2013 Sharon JA, Padilla HA, Boyce BL. Interpreting the ductility of nanocrystalline metals Journal of Materials Research. 28: 1539-1552. DOI: 10.1557/jmr.2013.139  0.72
2013 Weinberger CR, Boyce BL, Battaile CC. Slip planes in bcc transition metals International Materials Reviews. 58: 296-314. DOI: 10.1179/1743280412Y.0000000015  0.72
2013 Padilla HA, Boyce BL, Battaile CC, Prasad SV. Frictional performance and near-surface evolution of nanocrystalline Ni-Fe as governed by contact stress and sliding velocity Wear. 297: 860-871. DOI: 10.1016/j.wear.2012.10.018  0.72
2013 Brons JG, Padilla HA, Thompson GB, Boyce BL. Cryogenic indentation-induced grain growth in nanotwinned copper Scripta Materialia. 68: 781-784. DOI: 10.1016/j.scriptamat.2012.12.026  0.72
2013 Carroll JD, Clark BG, Buchheit TE, Boyce BL, Weinberger CR. An experimental statistical analysis of stress projection factors in BCC tantalum Materials Science and Engineering A. 581: 108-118. DOI: 10.1016/j.msea.2013.05.085  0.72
2013 Boyce BL, Clark BG, Lu P, Carroll JD, Weinberger CR. The morphology of tensile failure in tantalum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 4567-4580. DOI: 10.1007/s11661-013-1814-8  0.72
2012 Wilcox CC, Baker MS, Wick DV, Romeo RC, Martin RN, Clark BF, Breivik NL, Boyce BL. Finite element modeling and testing of a deformable carbon fiber reinforced polymer mirror Applied Optics. 51: 2081-2087. DOI: 10.1364/AO.51.002081  0.72
2012 Wilcox CC, Baker MS, Wick DV, Romeo RC, Martin RN, Clark BF, Breivik NL, Boyce BL. Design and verification of a finite element model for a thinshelled composite mirror for use with MEMS active optics Proceedings of Spie - the International Society For Optical Engineering. 8253. DOI: 10.1117/12.910928  0.72
2012 Carroll JD, Brewer LN, Battaile CC, Boyce BL, Emery JM. The effect of grain size on local deformation near a void-like stress concentration International Journal of Plasticity. 39: 46-60. DOI: 10.1016/j.ijplas.2012.06.002  0.72
2012 Battaile CC, Boyce BL, Weinberger CR, Prasad SV, Michael JR, Clark BG. The hardness and strength of metal tribofilms: An apparent contradiction between nanoindentation and pillar compression Acta Materialia. 60: 1712-1720. DOI: 10.1016/j.actamat.2011.11.059  0.72
2011 Wilcox CC, Wick DV, Soehnel G, Bagwell BE, Romeo RC, Martin RN, Baker MS, Breivik NL, Boyce BL, Martinez T, Restaino SR. Actuation for deformable thin-shelled composite mirrors Proceedings of Spie - the International Society For Optical Engineering. 8031. DOI: 10.1117/12.885542  0.72
2011 Boyce BL, Brewer LN, Neilsen MK, Perricone MJ. On the strain rate- and temperature-dependent tensile behavior of eutectic Sn-Pb solder Journal of Electronic Packaging, Transactions of the Asme. 133. DOI: 10.1115/1.4004846  0.72
2011 Reedy ED, Boyce BL, Foulk JW, Field RV, De Boer MP, Hazra SS. Predicting fracture in micrometer-scale polycrystalline silicon mems structures Journal of Microelectromechanical Systems. 20: 922-932. DOI: 10.1109/JMEMS.2011.2153824  0.72
2011 Steighner MS, Snedeker LP, Boyce BL, Gall K, Miller DC, Muhlstein CL. Dependence on diameter and growth direction of apparent strain to failure of Si nanowires Journal of Applied Physics. 109. DOI: 10.1063/1.3537658  0.72
2011 Boyce BL, Padilla HA. Anomalous fatigue behavior and fatigue-induced grain growth in nanocrystalline nickel alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1793-1804. DOI: 10.1007/s11661-011-0708-x  0.72
2011 Nguyen TD, Boyce BL. An inverse finite element method for determining the anisotropic properties of the cornea Biomechanics and Modeling in Mechanobiology. 10: 323-337. DOI: 10.1007/s10237-010-0237-3  0.72
2010 Myers KM, Coudrillier B, Boyce BL, Nguyen TD. The inflation response of the posterior bovine sclera. Acta Biomaterialia. 6: 4327-35. PMID 20558331 DOI: 10.1016/j.actbio.2010.06.007  0.72
2010 Dingreville R, Battaile CC, Brewer LN, Holm EA, Boyce BL. The effect of microstructural representation on simulations of microplastic ratcheting International Journal of Plasticity. 26: 617-633. DOI: 10.1016/j.ijplas.2009.09.004  0.72
2010 Janssens KGF, Battaile CC, Boyce BL, Brewer L. Papers from the 2009 TMS Annual Meeting Symposium on Mechanisms, theory, experiments and industrial practice in fatigue International Journal of Fatigue. 32: 791. DOI: 10.1016/j.ijfatigue.2009.10.016  0.72
2010 Boyce BL, Shaw MJ, Lu P, Dugger MT. Stronger silicon for microsystems Acta Materialia. 58: 439-448. DOI: 10.1016/j.actamat.2009.09.022  0.72
2010 Boyce BL, Huang JY, Miller DC, Kennedy MS. Deformation and failure of small-scale structures Jom. 62: 62-63. DOI: 10.1007/s11837-010-0061-3  0.72
2010 Padilla HA, Boyce BL. A Review of fatigue behavior in nanocrystalline metals Experimental Mechanics. 50: 5-23. DOI: 10.1007/s11340-009-9301-2  0.72
2010 Boyce BL. A sequential tensile method for rapid characterization of extreme-value behavior in microfabricated materials Proceedings of the Society For Experimental Mechanics, Inc.. 67: 993-997. DOI: 10.1007/s11340-009-9286-x  0.72
2010 Boyce BL, Lilleodden ET, Li X. Emerging methods in mechanical behavior Proceedings of the Society For Experimental Mechanics, Inc.. 67: 3. DOI: 10.1007/s11340-009-9279-9  0.72
2009 Robino CV, Boyce BL. Constitutive properties of dissimilar metal laser welds Asm Proceedings of the International Conference: Trends in Welding Research. 610-616. DOI: 10.1361/cp2008twr610  0.72
2009 Boyce BL, Dilmore MF. The dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.0002 s-1 to 200 s-1 International Journal of Impact Engineering. 36: 263-271. DOI: 10.1016/j.ijimpeng.2007.11.006  0.72
2009 Boyce BL. Stochastic reliability of brittle microsystems Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2009. 1: 639-644.  0.72
2009 Boyce BL, Brewer LN, Neilsen MK. Dynamic constitutive behavior of eutectic solder at strain-rates up to 200 s-1 Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2009. 4: 2483-2489.  0.72
2009 Boyce BL, Nguyen TD, Jones RE. Full-field viscoelastic inflation response of bovine cornea Proceedings of the Asme Summer Bioengineering Conference, Sbc2008. 783-784.  0.72
2009 Nguyen TD, Jones RE, Boyce BL. Modeling the finite deformation anisotropic viscoelastic behavior of the cornea Proceedings of the Asme Summer Bioengineering Conference, Sbc2008. 781-782.  0.72
2009 Alsem DH, Boyce BL, Stach EA, Ritchie RO. Effect of sidewall morphology on the fracture and fatigue properties of polysilicon structural films 12th International Conference On Fracture 2009, Icf-12. 5: 4051-4060.  0.72
2008 Boyce BL, Grazier JM, Jones RE, Nguyen TD. Full-field deformation of bovine cornea under constrained inflation conditions. Biomaterials. 29: 3896-904. PMID 18603294 DOI: 10.1016/j.biomaterials.2008.06.011  0.72
2008 Nguyen TD, Jones RE, Boyce BL. A nonlinear anisotropic viscoelastic model for the tensile behavior of the corneal stroma. Journal of Biomechanical Engineering. 130: 041020. PMID 18601462 DOI: 10.1115/1.2947399  0.72
2008 Boyce BL, Ballarini R, Chasiotis I. An argument for proof testing brittle microsystems in high-reliability applications Journal of Micromechanics and Microengineering. 18. DOI: 10.1088/0960-1317/18/11/117001  0.72
2008 Miller DC, Boyce BL, Kotula PG, Stoldt CR. Connections between morphological and mechanical evolution during galvanic corrosion of micromachined polycrystalline and monocrystalline silicon Journal of Applied Physics. 103. DOI: 10.1063/1.2926083  0.72
2008 Alsem DH, Boyce BL, Stach EA, Ritchie RO. Effect of post-release sidewall morphology on the fracture and fatigue properties of polycrystalline silicon structural films Sensors and Actuators, a: Physical. 147: 553-560. DOI: 10.1016/j.sna.2008.05.027  0.72
2008 Knorovsky GA, Robino CV, Boyce BL. Analysis of dissimilar alloy laser weld shear test data Icaleo 2008 - 27th International Congress On Applications of Lasers and Electro-Optics, Congress Proceedings. 318-326.  0.72
2007 Boyce BL, Jones RE, Nguyen TD, Grazier JM. Stress-controlled viscoelastic tensile response of bovine cornea. Journal of Biomechanics. 40: 2367-76. PMID 17240381 DOI: 10.1016/j.jbiomech.2006.12.001  0.72
2007 Boyce BL, Grazier JM, Buchheit TE, Shaw MJ. Strength distributions in polycrystalline silicon MEMS Journal of Microelectromechanical Systems. 16: 179-190. DOI: 10.1109/JMEMS.2007.892794  0.72
2007 Miller DC, Boyce BL, Gall K, Stoldt CR. Galvanic corrosion induced degredation of tensile properties in micromachined polycrystalline silicon Applied Physics Letters. 90. DOI: 10.1063/1.2737370  0.72
2007 Alsem DH, Timmerman R, Boyce BL, Stach EA, De Hosson JTM, Ritchie RO. Very high-cycle fatigue failure in micron-scale polycrystalline silicon films: Effects of environment and surface oxide thickness Journal of Applied Physics. 101. DOI: 10.1063/1.2403841  0.72
2007 Miller DC, Boyce BL, Dugger MT, Buchheit TE, Gall K. Characteristics of a commercially available silicon-on-insulator MEMS material Sensors and Actuators, a: Physical. 138: 130-144. DOI: 10.1016/j.sna.2007.04.023  0.72
2007 Tanner DM, Parson TB, Corwin AD, Walraven JA, Wittwer JW, Boyce BL, Winzer SR. Science-based MEMS reliability methodology Microelectronics Reliability. 47: 1806-1811. DOI: 10.1016/j.microrel.2007.07.061  0.72
2007 Nguyen TD, Jones RE, Boyce BL. Modeling the anisotropic finite-deformation viscoelastic behavior of soft fiber-reinforced composites International Journal of Solids and Structures. 44: 8366-8389. DOI: 10.1016/j.ijsolstr.2007.06.020  0.72
2007 Yang Y, Allameh S, Lou J, Imasogie B, Boyce BL, Soboyejo WO. Fatigue of LIGA Ni micro-electro-mechanical system thin films Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2340-2348. DOI: 10.1007/s11661-007-9246-y  0.72
2007 Nguyen TD, Jones RE, Boyce BL. Modeling the anisotropic finite-deformation viscoelastic behavior of soft fiber-reinforced tissues Proceedings of the Asme Summer Bioengineering Conference 2007, Sbc 2007. 445-446.  0.72
2006 Reu PL, Tanner DM, Epp DS, Parson TB, Boyce BL. Experimental apparatus and software design for dynamic long-term reliability testing of a spring-mass MEMS device Proceedings of Spie - the International Society For Optical Engineering. 6111. DOI: 10.1117/12.648488  0.72
2006 Boyce BL, Robino CV, Reu PL. Constitutive gradients and pore tolerance in two weldments American Society of Mechanical Engineers, Applied Mechanics Division, Amd. DOI: 10.1115/IMECE2006-15107  0.72
2006 Delrio FW, Dunn ML, Boyce BL, Corwin AD, De Boer MP. The effect of nanoparticles on rough surface adhesion Journal of Applied Physics. 99. DOI: 10.1063/1.2197263  0.72
2006 Jungk JM, Boyce BL, Buchheit TE, Friedmann TA, Yang D, Gerberich WW. Indentation fracture toughness and acoustic energy release in tetrahedral amorphous carbon diamond-like thin films Acta Materialia. 54: 4043-4052. DOI: 10.1016/j.actamat.2006.05.003  0.72
2006 Boyce BL, Reu PL, Robino CV. The constitutive behavior of laser welds in 304L stainless steel determined by digital image correlation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2481-2492. DOI: 10.1007/BF02586221  0.72
2006 Knorovsky GA, Michael JR, Boyce BL, Janssens KG, Galambos PC. An investigation of focused ion beam deposition as a microjoining technique Imaps International Conference and Exhibition On Device Packaging - Co-Located With the Global Business Council, Gbc 2006 Spring Conference 0.72
2004 Boyce BL, Michael JR, Kotula PG. Fatigue of metallic microdevices and the role of fatigue-induced surface oxides Acta Materialia. 52: 1609-1619. DOI: 10.1016/j.actamat.2003.12.032  0.72
2004 Garino TJ, Morales AM, Boyce BL. The mechanical properties, dimensional tolerance and microstructural characterization of micro-molded ceramic and metal components Microsystem Technologies. 10: 506-509. DOI: 10.1007/s00542-004-0382-7  0.72
2003 Morales AM, Garino TJ, Boyce BL, Domeier LA, Gutmann AK, McLean DE. Micromolding and sintering of nanoparticle preforms into microparts Proceedings of Spie - the International Society For Optical Engineering. 4979: 430-439. DOI: 10.1117/12.472736  0.72
2003 Boyce BL. Fatigue of LIGA Nickel Proceedings of Spie - the International Society For Optical Engineering. 4980: 175-182. DOI: 10.1117/12.472732  0.72
2003 Boyce BL, Chen X, Peters JO, Hutchinson JW, Ritchie RO. Mechanical relaxation of localized residual stresses associated with foreign object damage Materials Science and Engineering A. 349: 48-58. DOI: 10.1016/S0921-5093(02)00543-9  0.72
2003 Buchheit TE, Bataille CC, Michael JR, Boyce BL. Microstructure and Reliability of Surface Micromachined Polysilicon Used for MEMS American Society of Mechanical Engineers, Micro-Electromechanical Systems Division Publication (Mems). 5: 187-190.  0.72
2002 LaVan DA, Boyce BL, Buchheit TE. Size and frequency of defects in silicon MEMS Asme International Mechanical Engineering Congress and Exposition, Proceedings. 573-576. DOI: 10.1115/IMECE2002-32393  0.72
2002 Buchheit TE, Boyce BL, Wellman GW. The role of microstructure in MEMS deformation and failure Asme International Mechanical Engineering Congress and Exposition, Proceedings. 559-566. DOI: 10.1115/IMECE2002-32388  0.72
2002 Peters JO, Boyce BL, Chen X, McNaney JM, Hutchinson JW, Ritchie RO. On the application of the Kitagawa-Takahashi diagram to foreign-object damage and high-cycle fatigue Engineering Fracture Mechanics. 69: 1425-1446. DOI: 10.1016/S0013-7944(01)00152-7  0.72
2002 Nalla RK, Boyce BL, Campbell JP, Peters JO, Ritchie RO. Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 899-918.  0.72
2002 Altenberger I, Noster U, Boyce BL, Peters JO, Scholtes B, Ritchie RO. Effects of mechanical surface treatment on fatigue failure in Ti-6Al-4V: Role of residual stresses and foreign-object damage Materials Science Forum. 404: 457-462.  0.72
2001 Boyce BL, Chen X, Hutchinson JW, Ritchie RO. The residual stress state due to a spherical hard-body impact Mechanics of Materials. 33: 441-454. DOI: 10.1016/S0167-6636(01)00064-3  0.72
2001 Boyce BL, Ritchie RO. Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti-6Al-4V Engineering Fracture Mechanics. 68: 129-147. DOI: 10.1016/S0013-7944(00)00099-0  0.72
2000 Peters JO, Roder O, Boyce BL, Thompson AW, Ritchie RO. Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6AI-4V Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 1571-1583.  0.72
1999 Ritchie RO, Davidson DL, Boyce BL, Campbell JP, Roder O. High-cycle fatigue of Ti-6Al-4V Fatigue and Fracture of Engineering Materials and Structures. 22: 621-631. DOI: 10.1046/j.1460-2695.1999.00194.x  0.72
1999 Ritchie RO, Boyce BL, Campbell JP, Roder O, Thompson AW, Milligan WW. Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy International Journal of Fatigue. 21: 653-662. DOI: 10.1016/S0142-1123(99)00024-9  0.72
Show low-probability matches.