Year |
Citation |
Score |
2023 |
Shang Z, Sun T, Ding J, Richter NA, Heckman NM, White BC, Boyce BL, Hattar K, Wang H, Zhang X. Gradient nanostructured steel with superior tensile plasticity. Science Advances. 9: eadd9780. PMID 37256952 DOI: 10.1126/sciadv.add9780 |
0.325 |
|
2020 |
Gupta S, Stangebye S, Jungjohann K, Boyce B, Zhu T, Kacher J, Pierron ON. In situ TEM measurement of activation volume in ultrafine grained gold. Nanoscale. PMID 32193521 DOI: 10.1039/D0Nr01874K |
0.377 |
|
2020 |
Zarnas P, Dingreville R, Muntifering B, Hattar K, Boyce BL, Qu J. Statistical analysis of the interaction between irradiation-induced defects and triple junctions Advanced Modeling and Simulation in Engineering Sciences. 7: 1-20. DOI: 10.1186/S40323-020-0140-0 |
0.306 |
|
2020 |
Rodriguez MA, Harrison KL, Goriparti S, Griego JJM, Boyce BL, Perdue BR. Use of a Be-dome holder for texture and strain characterization of Li metal thin films via sin2(ψ) methodology Powder Diffraction. 35: 89-97. DOI: 10.1017/S0885715620000305 |
0.315 |
|
2020 |
Heckman NM, Padilla HA, Michael JR, Barr CM, Clark BG, Hattar K, Boyce BL. Rethinking scaling laws in the high-cycle fatigue response of nanostructured and coarse-grained metals International Journal of Fatigue. 134: 105472. DOI: 10.1016/J.Ijfatigue.2020.105472 |
0.384 |
|
2020 |
Roach AM, White BC, Garland A, Jared BH, Carroll JD, Boyce BL. Size-dependent stochastic tensile properties in additively manufactured 316L stainless steel Additive Manufacturing. 32: 101090. DOI: 10.1016/J.Addma.2020.101090 |
0.397 |
|
2020 |
Bahena JA, Heckman NM, Barr CM, Hattar K, Boyce BL, Hodge AM. Development of a heterogeneous nanostructure through abnormal recrystallization of a nanotwinned Ni superalloy Acta Materialia. 195: 132-140. DOI: 10.1016/J.Actamat.2020.05.057 |
0.352 |
|
2020 |
Schuler JD, Grigorian CM, Barr CM, Boyce BL, Hattar K, Rupert TJ. Amorphous intergranular films mitigate radiation damage in nanocrystalline Cu-Zr Acta Materialia. 186: 341-354. DOI: 10.1016/J.Actamat.2019.12.048 |
0.359 |
|
2020 |
Noell PJ, Sabisch JEC, Medlin DL, Boyce BL. Nanoscale conditions for ductile void nucleation in copper: Vacancy condensation and the growth-limited microstructural state Acta Materialia. 184: 211-224. DOI: 10.1016/J.Actamat.2019.11.022 |
0.435 |
|
2020 |
Noell PJ, Sills RB, Boyce BL. Suppression of Void Nucleation in High-Purity Aluminum via Dynamic Recrystallization Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 154-166. DOI: 10.1007/S11661-019-05457-W |
0.372 |
|
2019 |
Cook RF, DelRio FW, Boyce BL. Predicting strength distributions of MEMS structures using flaw size and spatial density. Microsystems & Nanoengineering. 5: 49. PMID 31700670 DOI: 10.1038/S41378-019-0093-Y |
0.355 |
|
2019 |
Zhang X, Wang QJ, Harrison KL, Jungjohann K, Boyce BL, Roberts SA, Attia PM, Harris SJ. Rethinking How External Pressure Can Suppress Dendrites in Lithium Metal Batteries Journal of the Electrochemical Society. 166: A3639-A3652. DOI: 10.1149/2.0701914Jes |
0.333 |
|
2019 |
Foiles SM, Abdeljawad F, Moore A, Boyce BL. Fatigue-driven acceleration of abnormal grain growth in nanocrystalline wires Modelling and Simulation in Materials Science and Engineering. 27: 025008. DOI: 10.1088/1361-651X/Aaf75D |
0.356 |
|
2019 |
Lu P, Abdeljawad F, Rodriguez M, Chandross M, Adams D, Boyce B, Clark B, Argibay N. On the thermal stability and grain boundary segregation in nanocrystalline PtAu alloys Materialia. 6: 100298. DOI: 10.1016/J.Mtla.2019.100298 |
0.336 |
|
2019 |
Dressler AD, Jost EW, Miers JC, Moore DG, Seepersad CC, Boyce BL. Heterogeneities Dominate Mechanical Performance of Additively Manufactured Metal Lattice Struts Additive Manufacturing. 28: 692-703. DOI: 10.1016/J.Addma.2019.06.011 |
0.425 |
|
2019 |
Croom BP, Jin H, Noell PJ, Boyce BL, Li X. Collaborative ductile rupture mechanisms of high-purity copper identified by in situ X-ray computed tomography Acta Materialia. 181: 377-384. DOI: 10.1016/J.Actamat.2019.10.005 |
0.391 |
|
2019 |
Schuler JD, Barr CM, Heckman NM, Copeland G, Boyce BL, Hattar K, Rupert TJ. In Situ High-Cycle Fatigue Reveals Importance of Grain Boundary Structure in Nanocrystalline Cu-Zr Jom. 71: 1221-1232. DOI: 10.1007/S11837-019-03361-7 |
0.431 |
|
2018 |
Heckman NM, Foiles SM, O'Brien CJ, Chandross M, Barr CM, Argibay N, Hattar K, Lu P, Adams DP, Boyce BL. New nanoscale toughening mechanisms mitigate embrittlement in binary nanocrystalline alloys. Nanoscale. PMID 30417913 DOI: 10.1039/C8Nr06419A |
0.412 |
|
2018 |
Curry JF, Babuska TF, Furnish TA, Lu P, Adams DP, Kustas AB, Nation BL, Dugger MT, Chandross M, Clark BG, Boyce BL, Schuh CA, Argibay N. Achieving Ultralow Wear with Stable Nanocrystalline Metals. Advanced Materials (Deerfield Beach, Fla.). e1802026. PMID 29943512 DOI: 10.1002/Adma.201802026 |
0.384 |
|
2018 |
Barr CM, Li N, Boyce BL, Hattar K. Examining the influence of grain size on radiation tolerance in the nanocrystalline regime Applied Physics Letters. 112: 181903. DOI: 10.1063/1.5016822 |
0.336 |
|
2018 |
Furnish TA, Bufford DC, Ren F, Mehta A, Hattar K, Boyce BL. Evidence that abnormal grain growth precedes fatigue crack initiation in nanocrystalline Ni-Fe Scripta Materialia. 143: 15-19. DOI: 10.1016/J.Scriptamat.2017.08.047 |
0.414 |
|
2018 |
Noell PJ, Carroll JD, Boyce BL. The mechanisms of ductile rupture Acta Materialia. 161: 83-98. DOI: 10.1016/J.Actamat.2018.09.006 |
0.466 |
|
2018 |
Abdeljawad F, Foiles SM, Moore AP, Hinkle AR, Barr CM, Heckman NM, Hattar K, Boyce BL. The role of the interface stiffness tensor on grain boundary dynamics Acta Materialia. 158: 440-453. DOI: 10.1016/J.Actamat.2018.06.025 |
0.35 |
|
2017 |
Salzbrenner BC, Rodelas JM, Madison JD, Jared BH, Swiler LP, Shen Y, Boyce BL. High-throughput stochastic tensile performance of additively manufactured stainless steel Journal of Materials Processing Technology. 241: 1-12. DOI: 10.1016/J.Jmatprotec.2016.10.023 |
0.301 |
|
2017 |
Noell P, Carroll J, Hattar K, Clark B, Boyce B. Do voids nucleate at grain boundaries during ductile rupture? Acta Materialia. 137: 103-114. DOI: 10.1016/J.Actamat.2017.07.004 |
0.402 |
|
2017 |
Kapoor M, Kaub T, Darling KA, Boyce BL, Thompson GB. An atom probe study on Nb solute partitioning and nanocrystalline grain stabilization in mechanically alloyed Cu-Nb Acta Materialia. 126: 564-575. DOI: 10.1016/J.Actamat.2016.12.057 |
0.311 |
|
2017 |
Abdeljawad F, Lu P, Argibay N, Clark BG, Boyce BL, Foiles SM. Grain boundary segregation in immiscible nanocrystalline alloys Acta Materialia. 126: 528-539. DOI: 10.1016/J.Actamat.2016.12.036 |
0.344 |
|
2017 |
Furnish TA, Mehta A, Van Campen D, Bufford DC, Hattar K, Boyce BL. The onset and evolution of fatigue-induced abnormal grain growth in nanocrystalline Ni–Fe Journal of Materials Science. 52: 46-59. DOI: 10.1007/S10853-016-0437-Z |
0.435 |
|
2016 |
Bufford DC, Stauffer D, Mook WM, Syed Amanulla SA, Boyce BL, Hattar K. High Cycle Fatigue in the Transmission Electron Microscope. Nano Letters. PMID 27351706 DOI: 10.1021/Acs.Nanolett.6B01560 |
0.426 |
|
2016 |
Furnish TA, Boyce BL, Sharon JA, O'Brien CJ, Clark BG, Arrington CL, Pillars JR. Fatigue stress concentration and notch sensitivity in nanocrystalline metals Journal of Materials Research. 31: 740-752. DOI: 10.1557/Jmr.2016.66 |
0.457 |
|
2016 |
Mohanty G, Wehrs J, Boyce BL, Taylor A, Hasegawa M, Philippe L, Michler J. Room temperature stress relaxation in nanocrystalline Ni measured by micropillar compression and miniature tension Journal of Materials Research. 31: 1085-1095. DOI: 10.1557/Jmr.2016.101 |
0.358 |
|
2016 |
Bufford DC, Stauffer D, Mook WM, Asif SS, Boyce BL, Hattar K. Combining Orientation Mapping and
In Situ
TEM to Investigate High-Cycle Fatigue and Failure Microscopy and Microanalysis. 22: 1736-1737. DOI: 10.1017/S1431927616009521 |
0.333 |
|
2016 |
Argibay N, Furnish T, Boyce B, Clark B, Chandross M. Stress-dependent grain size evolution of nanocrystalline Ni-W and its impact on friction behavior Scripta Materialia. 123: 26-29. DOI: 10.1016/J.Scriptamat.2016.05.009 |
0.384 |
|
2016 |
Clark BG, Hattar K, Marshall MT, Chookajorn T, Boyce BL, Schuh CA. Thermal Stability Comparison of Nanocrystalline Fe-Based Binary Alloy Pairs Jom. 68: 1625-1633. DOI: 10.1007/S11837-016-1868-3 |
0.326 |
|
2016 |
Boyce BL, Kramer SLB, Bosiljevac TR, Corona E, Moore JA, Elkhodary K, Simha CHM, Williams BW, Cerrone AR, Nonn A, Hochhalter JD, Bomarito GF, Warner JE, Carter BJ, Warner DH, et al. The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading International Journal of Fracture. 198: 5-100. DOI: 10.1007/S10704-016-0089-7 |
0.719 |
|
2016 |
Kramer SLB, Boyce BL. Preface to the special volume on the second Sandia Fracture Challenge International Journal of Fracture. 198. DOI: 10.1007/S10704-016-0087-9 |
0.337 |
|
2015 |
Buchheit TE, Carroll JD, Clark BG, Boyce BL. Evaluating Deformation-Induced Grain Orientation Change in a Polycrystal During In Situ Tensile Deformation using EBSD. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 21: 969-84. PMID 26189352 DOI: 10.1017/S1431927615000677 |
0.367 |
|
2015 |
Yagnamurthy S, Boyce BL, Chasiotis I. Role of Microstructure and Doping on the Mechanical Strength and Toughness of Polysilicon Thin Films Journal of Microelectromechanical Systems. 24: 1436-1452. DOI: 10.1109/Jmems.2015.2410215 |
0.424 |
|
2015 |
Battaile CC, Emery JM, Brewer LN, Boyce BL. Crystal plasticity simulations of microstructure-induced uncertainty in strain concentration near voids in brass Philosophical Magazine. 95: 1069-1079. DOI: 10.1080/14786435.2015.1009958 |
0.341 |
|
2015 |
Grutzik SJ, Milosevic E, Boyce BL, Zehnder AT. Oxide driven strength evolution of silicon surfaces Journal of Applied Physics. 118. DOI: 10.1063/1.4936118 |
0.334 |
|
2015 |
DelRio FW, Cook RF, Boyce BL. Fracture strength of micro- and nano-scale silicon components Applied Physics Reviews. 2: 021303. DOI: 10.1063/1.4919540 |
0.376 |
|
2015 |
Clark BG, Michael JR, McKenzie BB, Carroll J, Lim H, Boyce BL. Characterization of Void-Dominated Ductile Failure in Pure Ta Microscopy and Microanalysis. 21: 1163-1164. DOI: 10.1017/S1431927615006601 |
0.333 |
|
2015 |
Lim H, Battaile CC, Carroll JD, Boyce BL, Weinberger CR. A physically based model of temperature and strain rate dependent yield in BCC metals: Implementation into crystal plasticity Journal of the Mechanics and Physics of Solids. 74: 80-96. DOI: 10.1016/J.Jmps.2014.10.003 |
0.326 |
|
2015 |
Lim H, Carroll JD, Battaile CC, Boyce BL, Weinberger CR. Quantitative comparison between experimental measurements and CP-FEM predictions of plastic deformation in a tantalum oligocrystal International Journal of Mechanical Sciences. 92: 98-108. DOI: 10.1016/J.Ijmecsci.2014.12.010 |
0.339 |
|
2015 |
Sarobol P, Chandross M, Carroll JD, Mook WM, Bufford DC, Boyce BL, Hattar K, Kotula PG, Hall AC. Room Temperature Deformation Mechanisms of Alumina Particles Observed from In Situ Micro-compression and Atomistic Simulations Journal of Thermal Spray Technology. DOI: 10.1007/S11666-015-0295-2 |
0.371 |
|
2015 |
Boyce BL, Furnish TA, Padilla HA, Van Campen D, Mehta A. Detecting rare, abnormally large grains by x-ray diffraction Journal of Materials Science. 50: 6719-6729. DOI: 10.1007/S10853-015-9226-3 |
0.355 |
|
2015 |
Janish MT, Kotula PG, Boyce BL, Carter CB. Observations of fcc and hcp tantalum Journal of Materials Science. 50: 3706-3715. DOI: 10.1007/S10853-015-8931-2 |
0.37 |
|
2014 |
Brons JG, Hardwick JA, Padilla HA, Hattar K, Thompson GB, Boyce BL. The role of copper twin boundaries in cryogenic indentation-induced grain growth Materials Science and Engineering A. 592: 182-188. DOI: 10.1016/J.Msea.2013.11.005 |
0.334 |
|
2014 |
Lim H, Carroll JD, Battaile CC, Buchheit TE, Boyce BL, Weinberger CR. Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals International Journal of Plasticity. 60: 1-18. DOI: 10.1016/J.Ijplas.2014.05.004 |
0.388 |
|
2014 |
Bieler TR, Sutton SC, Dunlap BE, Keith ZA, Eisenlohr P, Crimp MA, Boyce BL. Grain boundary responses to heterogeneous deformation in tantalum polycrystals Jom. 66: 121-128. DOI: 10.1007/S11837-013-0821-Y |
0.33 |
|
2014 |
Boyce BL. Preface to the Special Issue on the Sandia Fracture Challenge International Journal of Fracture. 186: 1-3. DOI: 10.1007/S10704-014-9929-5 |
0.392 |
|
2014 |
Boyce BL, Kramer SLB, Fang HE, Cordova TE, Neilsen MK, Dion K, Kaczmarowski AK, Karasz E, Xue L, Gross AJ, Ghahremaninezhad A, Ravi-Chandar K, Lin SP, Chi SW, Chen JS, et al. The sandia fracture challenge: Blind round robin predictions of ductile tearing International Journal of Fracture. 186: 5-68. DOI: 10.1007/S10704-013-9904-6 |
0.361 |
|
2013 |
Sharon JA, Padilla HA, Boyce BL. Interpreting the ductility of nanocrystalline metals Journal of Materials Research. 28: 1539-1552. DOI: 10.1557/Jmr.2013.139 |
0.407 |
|
2013 |
Sharon JA, Hattara K, Boyce BL, Brewer LN. Compressive properties of ‹110› Cu micro-pillars after high-dose self-ion irradiation Materials Research Letters. 2: 57-62. DOI: 10.1080/21663831.2013.859179 |
0.304 |
|
2013 |
Brons J, Padilla H, Thompson G, Boyce B. Evidence of Cryogenic Indentation-Induced Grain Growth in Highly Twinned Nanocrystalline Copper Microscopy and Microanalysis. 19: 1770-1771. DOI: 10.1017/S1431927613010842 |
0.311 |
|
2013 |
Padilla HA, Boyce BL, Battaile CC, Prasad SV. Frictional performance and near-surface evolution of nanocrystalline Ni-Fe as governed by contact stress and sliding velocity Wear. 297: 860-871. DOI: 10.1016/J.Wear.2012.10.018 |
0.393 |
|
2013 |
Brons JG, Padilla HA, Thompson GB, Boyce BL. Cryogenic indentation-induced grain growth in nanotwinned copper Scripta Materialia. 68: 781-784. DOI: 10.1016/J.Scriptamat.2012.12.026 |
0.34 |
|
2013 |
Carroll JD, Clark BG, Buchheit TE, Boyce BL, Weinberger CR. An experimental statistical analysis of stress projection factors in BCC tantalum Materials Science and Engineering A. 581: 108-118. DOI: 10.1016/J.Msea.2013.05.085 |
0.383 |
|
2013 |
Boyce BL, Clark BG, Lu P, Carroll JD, Weinberger CR. The morphology of tensile failure in tantalum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 4567-4580. DOI: 10.1007/S11661-013-1814-8 |
0.446 |
|
2012 |
Carroll JD, Brewer LN, Battaile CC, Boyce BL, Emery JM. The effect of grain size on local deformation near a void-like stress concentration International Journal of Plasticity. 39: 46-60. DOI: 10.1016/J.Ijplas.2012.06.002 |
0.406 |
|
2012 |
Battaile CC, Boyce BL, Weinberger CR, Prasad SV, Michael JR, Clark BG. The hardness and strength of metal tribofilms: An apparent contradiction between nanoindentation and pillar compression Acta Materialia. 60: 1712-1720. DOI: 10.1016/J.Actamat.2011.11.059 |
0.397 |
|
2011 |
Boyce BL, Brewer LN, Neilsen MK, Perricone MJ. On the strain rate- and temperature-dependent tensile behavior of eutectic Sn-Pb solder Journal of Electronic Packaging, Transactions of the Asme. 133. DOI: 10.1115/1.4004846 |
0.343 |
|
2011 |
Reedy ED, Boyce BL, Foulk JW, Field RV, De Boer MP, Hazra SS. Predicting fracture in micrometer-scale polycrystalline silicon mems structures Journal of Microelectromechanical Systems. 20: 922-932. DOI: 10.1109/Jmems.2011.2153824 |
0.732 |
|
2011 |
Steighner MS, Snedeker LP, Boyce BL, Gall K, Miller DC, Muhlstein CL. Dependence on diameter and growth direction of apparent strain to failure of Si nanowires Journal of Applied Physics. 109. DOI: 10.1063/1.3537658 |
0.358 |
|
2011 |
Boyce BL, Padilla HA. Anomalous fatigue behavior and fatigue-induced grain growth in nanocrystalline nickel alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1793-1804. DOI: 10.1007/S11661-011-0708-X |
0.466 |
|
2010 |
Dingreville R, Battaile CC, Brewer LN, Holm EA, Boyce BL. The effect of microstructural representation on simulations of microplastic ratcheting International Journal of Plasticity. 26: 617-633. DOI: 10.1016/J.Ijplas.2009.09.004 |
0.375 |
|
2010 |
Boyce BL, Shaw MJ, Lu P, Dugger MT. Stronger silicon for microsystems Acta Materialia. 58: 439-448. DOI: 10.1016/J.Actamat.2009.09.022 |
0.382 |
|
2010 |
Boyce BL, Huang JY, Miller DC, Kennedy MS. Deformation and failure of small-scale structures Jom. 62: 62-63. DOI: 10.1007/S11837-010-0061-3 |
0.309 |
|
2010 |
Padilla HA, Boyce BL. A Review of fatigue behavior in nanocrystalline metals Experimental Mechanics. 50: 5-23. DOI: 10.1007/S11340-009-9301-2 |
0.426 |
|
2010 |
Boyce BL. A sequential tensile method for rapid characterization of extreme-value behavior in microfabricated materials Proceedings of the Society For Experimental Mechanics, Inc.. 67: 993-997. DOI: 10.1007/S11340-009-9286-X |
0.407 |
|
2010 |
Boyce BL, Lilleodden ET, Li X. Emerging methods in mechanical behavior Proceedings of the Society For Experimental Mechanics, Inc.. 67: 3. DOI: 10.1007/S11340-009-9279-9 |
0.351 |
|
2009 |
Boyce BL, Dilmore MF. The dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.0002 s-1 to 200 s-1 International Journal of Impact Engineering. 36: 263-271. DOI: 10.1016/J.Ijimpeng.2007.11.006 |
0.325 |
|
2009 |
Alsem DH, Boyce BL, Stach EA, Ritchie RO. Effect of sidewall morphology on the fracture and fatigue properties of polysilicon structural films 12th International Conference On Fracture 2009, Icf-12. 5: 4051-4060. |
0.669 |
|
2008 |
Nguyen TD, Jones RE, Boyce BL. A nonlinear anisotropic viscoelastic model for the tensile behavior of the corneal stroma. Journal of Biomechanical Engineering. 130: 041020. PMID 18601462 DOI: 10.1115/1.2947399 |
0.313 |
|
2008 |
Boyce BL, Ballarini R, Chasiotis I. An argument for proof testing brittle microsystems in high-reliability applications Journal of Micromechanics and Microengineering. 18. DOI: 10.1088/0960-1317/18/11/117001 |
0.342 |
|
2008 |
Miller DC, Boyce BL, Kotula PG, Stoldt CR. Connections between morphological and mechanical evolution during galvanic corrosion of micromachined polycrystalline and monocrystalline silicon Journal of Applied Physics. 103. DOI: 10.1063/1.2926083 |
0.417 |
|
2008 |
Alsem DH, Boyce BL, Stach EA, Ritchie RO. Effect of post-release sidewall morphology on the fracture and fatigue properties of polycrystalline silicon structural films Sensors and Actuators, a: Physical. 147: 553-560. DOI: 10.1016/J.Sna.2008.05.027 |
0.715 |
|
2007 |
Boyce BL, Jones RE, Nguyen TD, Grazier JM. Stress-controlled viscoelastic tensile response of bovine cornea. Journal of Biomechanics. 40: 2367-76. PMID 17240381 DOI: 10.1016/J.Jbiomech.2006.12.001 |
0.334 |
|
2007 |
Boyce BL, Grazier JM, Buchheit TE, Shaw MJ. Strength distributions in polycrystalline silicon MEMS Journal of Microelectromechanical Systems. 16: 179-190. DOI: 10.1109/Jmems.2007.892794 |
0.385 |
|
2007 |
Miller DC, Boyce BL, Gall K, Stoldt CR. Galvanic corrosion induced degredation of tensile properties in micromachined polycrystalline silicon Applied Physics Letters. 90. DOI: 10.1063/1.2737370 |
0.4 |
|
2007 |
Alsem DH, Timmerman R, Boyce BL, Stach EA, De Hosson JTM, Ritchie RO. Very high-cycle fatigue failure in micron-scale polycrystalline silicon films: Effects of environment and surface oxide thickness Journal of Applied Physics. 101. DOI: 10.1063/1.2403841 |
0.737 |
|
2007 |
Miller DC, Boyce BL, Dugger MT, Buchheit TE, Gall K. Characteristics of a commercially available silicon-on-insulator MEMS material Sensors and Actuators, a: Physical. 138: 130-144. DOI: 10.1016/J.Sna.2007.04.023 |
0.399 |
|
2007 |
Yang Y, Imasogie B, Allameh S, Boyce B, Lian K, Lou J, Soboyejo W. Mechanisms of fatigue in LIGA Ni MEMS thin films Materials Science and Engineering: A. 444: 39-50. DOI: 10.1016/J.Msea.2006.06.124 |
0.426 |
|
2007 |
Tanner DM, Parson TB, Corwin AD, Walraven JA, Wittwer JW, Boyce BL, Winzer SR. Science-based MEMS reliability methodology Microelectronics Reliability. 47: 1806-1811. DOI: 10.1016/J.Microrel.2007.07.061 |
0.385 |
|
2007 |
Yang Y, Allameh S, Lou J, Imasogie B, Boyce BL, Soboyejo WO. Fatigue of LIGA Ni micro-electro-mechanical system thin films Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2340-2348. DOI: 10.1007/S11661-007-9246-Y |
0.429 |
|
2007 |
Yang Y, Allameh S, Boyce B, Chan K, Soboyejo W. An Experimental Study of Fracture of LIGA Ni Micro-Electro-Mechanical Systems Thin Films Metallurgical and Materials Transactions A. 38: 1223-1230. DOI: 10.1007/S11661-007-9147-0 |
0.408 |
|
2006 |
Delrio FW, Dunn ML, Boyce BL, Corwin AD, De Boer MP. The effect of nanoparticles on rough surface adhesion Journal of Applied Physics. 99. DOI: 10.1063/1.2197263 |
0.326 |
|
2006 |
Jungk JM, Boyce BL, Buchheit TE, Friedmann TA, Yang D, Gerberich WW. Indentation fracture toughness and acoustic energy release in tetrahedral amorphous carbon diamond-like thin films Acta Materialia. 54: 4043-4052. DOI: 10.1016/J.Actamat.2006.05.003 |
0.405 |
|
2006 |
Gerberich WW, Mook WM, Cordill MJ, Jungk JM, Boyce B, Friedmann T, Moody NR, Yang D. Nanoprobing fracture length scales International Journal of Fracture. 138: 75-100. DOI: 10.1007/S10704-006-7155-5 |
0.402 |
|
2006 |
Boyce BL, Reu PL, Robino CV. The constitutive behavior of laser welds in 304L stainless steel determined by digital image correlation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2481-2492. DOI: 10.1007/Bf02586221 |
0.361 |
|
2004 |
Boyce B, Mehta A, Peters J, Ritchie R. A Spatially-resolved Synchrotron Diffraction Method for Evaluating Impact-induced Residual Stresses Journal of Neutron Research. 12: 75-80. DOI: 10.1080/10238160410001734496 |
0.536 |
|
2004 |
Boyce BL, Michael JR, Kotula PG. Fatigue of metallic microdevices and the role of fatigue-induced surface oxides Acta Materialia. 52: 1609-1619. DOI: 10.1016/J.Actamat.2003.12.032 |
0.44 |
|
2004 |
Garino TJ, Morales AM, Boyce BL. The mechanical properties, dimensional tolerance and microstructural characterization of micro-molded ceramic and metal components Microsystem Technologies. 10: 506-509. DOI: 10.1007/S00542-004-0382-7 |
0.396 |
|
2003 |
Boyce BL. Fatigue of LIGA Nickel Proceedings of Spie - the International Society For Optical Engineering. 4980: 175-182. DOI: 10.1117/12.472732 |
0.408 |
|
2003 |
Boyce BL, Chen X, Peters JO, Hutchinson JW, Ritchie RO. Mechanical relaxation of localized residual stresses associated with foreign object damage Materials Science and Engineering A. 349: 48-58. DOI: 10.1016/S0921-5093(02)00543-9 |
0.408 |
|
2003 |
Lee KW, Chung Y, Chan C, Bello I, Lee S, Karimi A, Patscheider J, Delplancke-Ogletree M, Yang D, Boyce B, Buchheit T. An international round-robin experiment to evaluate the consistency of nanoindentation hardness measurements of thin films Surface and Coatings Technology. 168: 57-61. DOI: 10.1016/S0257-8972(02)00889-7 |
0.317 |
|
2002 |
Altenberger I, Noster U, Boyce BL, Peters JO, Scholtes B, Ritchie RO. Effects of mechanical surface treatment on fatigue failure in Ti-6Al-4V: Role of residual stresses and foreign-object damage Materials Science Forum. 457-462. DOI: 10.4028/Www.Scientific.Net/Msf.404-407.457 |
0.555 |
|
2002 |
Peters JO, Boyce BL, Chen X, McNaney JM, Hutchinson JW, Ritchie RO. On the application of the Kitagawa-Takahashi diagram to foreign-object damage and high-cycle fatigue Engineering Fracture Mechanics. 69: 1425-1446. DOI: 10.1016/S0013-7944(01)00152-7 |
0.572 |
|
2002 |
Nalla RK, Ritchie RO, Boyce BL, Campbell JP, Peters JO. Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures Metallurgical and Materials Transactions A. 33: 899-918. DOI: 10.1007/S11661-002-0160-Z |
0.725 |
|
2002 |
Nalla RK, Boyce BL, Campbell JP, Peters JO, Ritchie RO. Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 899-918. |
0.63 |
|
2001 |
Garino TJ, Morales A, Buchheit T, Boyce B. The Fabrication of Stainless Steel Parts for MEMs Mrs Proceedings. 687. DOI: 10.1557/Proc-687-B5.19 |
0.343 |
|
2001 |
Boyce BL, Chen X, Hutchinson JW, Ritchie RO. The residual stress state due to a spherical hard-body impact Mechanics of Materials. 33: 441-454. DOI: 10.1016/S0167-6636(01)00064-3 |
0.493 |
|
2001 |
Boyce BL, Ritchie RO. Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti-6Al-4V Engineering Fracture Mechanics. 68: 129-147. DOI: 10.1016/S0013-7944(00)00099-0 |
0.543 |
|
2000 |
Peters JO, Roder O, Boyce BL, Thompson AW, Ritchie RO. Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6AI-4V Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 1571-1583. DOI: 10.1007/S11661-000-0167-2 |
0.43 |
|
1999 |
Ritchie RO, Boyce BL, Campbell JP, Roder O, Thompson AW, Milligan WW. Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy International Journal of Fatigue. 21: 653-662. DOI: 10.1016/S0142-1123(99)00024-9 |
0.536 |
|
Low-probability matches (unlikely to be authored by this person) |
2013 |
Weinberger CR, Boyce BL, Battaile CC. Slip planes in bcc transition metals International Materials Reviews. 58: 296-314. DOI: 10.1179/1743280412Y.0000000015 |
0.297 |
|
2003 |
Buchheit TE, Bataille CC, Michael JR, Boyce BL. Microstructure and Reliability of Surface Micromachined Polysilicon Used for MEMS American Society of Mechanical Engineers, Micro-Electromechanical Systems Division Publication (Mems). 5: 187-190. |
0.295 |
|
2014 |
Janish MT, Kotula PG, Boyce BL, Barry Carter C. Observations on heavily deformed tantalum Microscopy and Microanalysis. 20: 1082-1083. DOI: 10.1017/S1431927614007132 |
0.294 |
|
2023 |
Barr CM, Duong T, Bufford DC, Milne Z, Molkeri A, Heckman NM, Adams DP, Srivastava A, Hattar K, Demkowicz MJ, Boyce BL. Autonomous healing of fatigue cracks via cold welding. Nature. PMID 37468631 DOI: 10.1038/s41586-023-06223-0 |
0.293 |
|
2020 |
Garland AP, White BC, Jared BH, Heiden M, Donahue E, Boyce BL. Deep Convolutional Neural Networks as a Rapid Screening Tool for Complex Additively Manufactured Structures Additive Manufacturing. 35: 101217. DOI: 10.1016/J.Addma.2020.101217 |
0.29 |
|
2011 |
Wilcox CC, Wick DV, Soehnel G, Bagwell BE, Romeo RC, Martin RN, Baker MS, Breivik NL, Boyce BL, Martinez T, Restaino SR. Actuation for deformable thin-shelled composite mirrors Proceedings of Spie - the International Society For Optical Engineering. 8031. DOI: 10.1117/12.885542 |
0.289 |
|
2019 |
Dennett CA, Choens RC, Taylor CA, Heckman NM, Ingraham MD, Robinson D, Boyce BL, Short MP, Hattar K. Listening to Radiation Damage In Situ: Passive and Active Acoustic Techniques Jom. 72: 197-209. DOI: 10.1007/S11837-019-03898-7 |
0.286 |
|
2010 |
Clark B, Knapp J, Hattar K, Padilla H, Boyce B. In-Situ TEM Studies of Deformation Mechanisms in Nanograined Al Strengthened with Al2O3 Nanoparticles Microscopy and Microanalysis. 16: 1724-1725. DOI: 10.1017/S1431927610062781 |
0.284 |
|
2007 |
Brewer L, Boyce B, Perricone M. Electron Back-Scattered Diffraction Characterization of Microstructures in Dynamically Deformed Pb-Sn Solder Microscopy and Microanalysis. 13. DOI: 10.1017/S1431927607074016 |
0.284 |
|
2020 |
Sills RB, Boyce BL. Void growth by dislocation adsorption Materials Research Letters. 8: 103-109. DOI: 10.1080/21663831.2019.1702114 |
0.282 |
|
2002 |
LaVan DA, Boyce BL, Buchheit TE. Size and frequency of defects in silicon MEMS Asme International Mechanical Engineering Congress and Exposition, Proceedings. 573-576. DOI: 10.1115/IMECE2002-32393 |
0.281 |
|
2023 |
Barrios A, Kunka C, Nogan J, Hattar K, Boyce BL. Automated High-Throughput Fatigue Testing of Freestanding Thin Films. Small Methods. e2201591. PMID 37098647 DOI: 10.1002/smtd.202201591 |
0.279 |
|
1999 |
Ritchie RO, Davidson DL, Boyce BL, Campbell JP, Roder O. High-cycle fatigue of Ti-6Al-4V Fatigue and Fracture of Engineering Materials and Structures. 22: 621-631. DOI: 10.1046/j.1460-2695.1999.00194.x |
0.279 |
|
2010 |
Janssens KGF, Battaile CC, Boyce BL, Brewer L. Papers from the 2009 TMS Annual Meeting Symposium on Mechanisms, theory, experiments and industrial practice in fatigue International Journal of Fatigue. 32: 791. DOI: 10.1016/J.Ijfatigue.2009.10.016 |
0.277 |
|
2010 |
Myers KM, Coudrillier B, Boyce BL, Nguyen TD. The inflation response of the posterior bovine sclera. Acta Biomaterialia. 6: 4327-35. PMID 20558331 DOI: 10.1016/J.Actbio.2010.06.007 |
0.276 |
|
2011 |
Nguyen TD, Boyce BL. An inverse finite element method for determining the anisotropic properties of the cornea Biomechanics and Modeling in Mechanobiology. 10: 323-337. DOI: 10.1007/S10237-010-0237-3 |
0.275 |
|
2002 |
Buchheit TE, Boyce BL, Wellman GW. The role of microstructure in MEMS deformation and failure Asme International Mechanical Engineering Congress and Exposition, Proceedings. 559-566. DOI: 10.1115/IMECE2002-32388 |
0.271 |
|
2019 |
Kunka C, Boyce BL, Foiles SM, Dingreville R. Revealing inconsistencies in X-ray width methods for nanomaterials. Nanoscale. PMID 31746917 DOI: 10.1039/C9Nr08268A |
0.268 |
|
2009 |
Boyce BL. Stochastic reliability of brittle microsystems Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2009. 1: 639-644. |
0.268 |
|
2012 |
Wilcox CC, Baker MS, Wick DV, Romeo RC, Martin RN, Clark BF, Breivik NL, Boyce BL. Finite element modeling and testing of a deformable carbon fiber reinforced polymer mirror. Applied Optics. 51: 2081-7. PMID 22534920 DOI: 10.1364/Ao.51.002081 |
0.268 |
|
2008 |
Boyce BL, Grazier JM, Jones RE, Nguyen TD. Full-field deformation of bovine cornea under constrained inflation conditions. Biomaterials. 29: 3896-904. PMID 18603294 DOI: 10.1016/J.Biomaterials.2008.06.011 |
0.267 |
|
2018 |
Curry JF, Babuska TF, Furnish TA, Lu P, Adams DP, Kustas AB, Nation BL, Dugger MT, Chandross M, Clark BG, Boyce BL, Schuh CA, Argibay N. Wear: Achieving Ultralow Wear with Stable Nanocrystalline Metals (Adv. Mater. 32/2018) Advanced Materials. 30: 1870242. DOI: 10.1002/Adma.201870242 |
0.26 |
|
2020 |
Alberdi R, Dingreville R, Robbins J, Walsh T, White BC, Jared B, Boyce BL. Multi-morphology lattices lead to improved plastic energy absorption Materials & Design. 194: 108883. DOI: 10.1016/J.Matdes.2020.108883 |
0.258 |
|
2020 |
Garland AP, Adstedt KM, Casias ZJ, White BC, Mook WM, Kaehr B, Jared BH, Lester BT, Leathe NS, Schwaller E, Boyce BL. Coulombic friction in metamaterials to dissipate mechanical energy Extreme Mechanics Letters. 40: 100847. DOI: 10.1016/J.Eml.2020.100847 |
0.251 |
|
2017 |
Jared BH, Aguilo MA, Beghini LL, Boyce BL, Clark BW, Cook A, Kaehr BJ, Robbins J. Additive manufacturing: Toward holistic design Scripta Materialia. 135: 141-147. DOI: 10.1016/J.Scriptamat.2017.02.029 |
0.249 |
|
2002 |
Altenberger I, Noster U, Boyce BL, Peters JO, Scholtes B, Ritchie RO. Effects of mechanical surface treatment on fatigue failure in Ti-6Al-4V: Role of residual stresses and foreign-object damage Materials Science Forum. 404: 457-462. |
0.245 |
|
2015 |
Thompson GB, Kapoor M, Kaub T, Boyce B, Clarke B, Darling K, Felfer P, Cairney J. Investigation into Solute Stabilizing Effects in Nanocrystalline Materials: An Atom Probe Characterization Study Microscopy and Microanalysis. 21: 357-358. DOI: 10.1017/S1431927615002585 |
0.244 |
|
2020 |
Gallegos MA, Garcia CM, Schunk PR, White BC, Boyce BL, Secor EB, Kaehr B. Investigating Porous Media for Relief Printing Using Micro‐Architected Materials Advanced Engineering Materials. 2000548. DOI: 10.1002/Adem.202000548 |
0.243 |
|
2015 |
Mathaudhu SN, Boyce BL. Thermal Stability: The Next Frontier for Nanocrystalline Materials Jom. 67: 2785-2787. DOI: 10.1007/S11837-015-1708-X |
0.24 |
|
2007 |
Nguyen TD, Jones RE, Boyce BL. Modeling the anisotropic finite-deformation viscoelastic behavior of soft fiber-reinforced composites International Journal of Solids and Structures. 44: 8366-8389. DOI: 10.1016/J.Ijsolstr.2007.06.020 |
0.231 |
|
2021 |
Barr CM, Foiles SM, Alkayyali M, Mahmood Y, Price PM, Adams DP, Boyce BL, Abdeljawad F, Hattar K. The role of grain boundary character in solute segregation and thermal stability of nanocrystalline Pt-Au. Nanoscale. PMID 33491721 DOI: 10.1039/d0nr07180c |
0.226 |
|
2006 |
Boyce BL, Robino CV, Reu PL. Constitutive gradients and pore tolerance in two weldments American Society of Mechanical Engineers, Applied Mechanics Division, Amd. DOI: 10.1115/IMECE2006-15107 |
0.219 |
|
2019 |
Jungjohann K, Harrison K, Goriparti S, Cullier P, Fischer R, Boyce B, Casias Z, Hahn N, Perdue B, Zavadil K. SEM, TEM, and Cryo-EM of Electrodeposited Li, Mg, and Ca Metal Electrodes Microscopy and Microanalysis. 25: 2040-2041. DOI: 10.1017/S1431927619010936 |
0.213 |
|
2008 |
Knorovsky GA, Robino CV, Boyce BL. Analysis of dissimilar alloy laser weld shear test data Icaleo 2008 - 27th International Congress On Applications of Lasers and Electro-Optics, Congress Proceedings. 318-326. |
0.211 |
|
2019 |
Briggs SA, Monterrosa A, Heckman N, Barr CM, Treadwell L, Boyce B, Hattar K. Development of the In-Situ Ion Irradiation SEM at Sandia National Laboratories Microscopy and Microanalysis. 25: 1596-1597. DOI: 10.1017/S1431927619008717 |
0.205 |
|
2015 |
Sarobol P, Chandross M, Carroll JD, Mook WM, Bufford DC, Kotula PG, McKenzie BB, Boyce BL, Hattar K, Hall AC. Deformation behavior of alumina particles in compression for room temperature solid-state deposition Proceedings of the International Thermal Spray Conference. 1: 281-286. |
0.205 |
|
2015 |
Buchheit TE, Carroll JD, Clark BG, Boyce BL. Evaluating Deformation-Induced Grain Orientation Change in a Polycrystal During In Situ Tensile Deformation using EBSD Microscopy and Microanalysis. DOI: 10.1017/S1431927615000677 |
0.197 |
|
2009 |
Robino CV, Boyce BL. Constitutive properties of dissimilar metal laser welds Asm Proceedings of the International Conference: Trends in Welding Research. 610-616. DOI: 10.1361/cp2008twr610 |
0.19 |
|
2003 |
Morales AM, Garino TJ, Boyce BL, Domeier LA, Gutmann AK, McLean DE. Micromolding and sintering of nanoparticle preforms into microparts Proceedings of Spie - the International Society For Optical Engineering. 4979: 430-439. DOI: 10.1117/12.472736 |
0.181 |
|
2005 |
Horn G, Lesniak J, Mackin T, Boyce B. Infrared grey-field polariscope: A tool for rapid stress analysis in microelectronic materials and devices Review of Scientific Instruments. 76: 045108. DOI: 10.1063/1.1884189 |
0.178 |
|
2022 |
Sidebottom MA, Babuska TF, Ullah S, Heckman N, Boyce BL, Krick BA. Nanomechanical Filler Functionality Enables Ultralow Wear Polytetrafluoroethylene Composites. Acs Applied Materials & Interfaces. 14: 54293-54303. PMID 36417667 DOI: 10.1021/acsami.2c13644 |
0.161 |
|
2023 |
Jauregui LJ, Fowler JE, Ruggles T, Cillessen DE, Johnson KL, Williams S, Boyce BL. High-throughput EBSD Characterization of Additively Manufactured Microstructures. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 29: 1413-1414. PMID 37613628 DOI: 10.1093/micmic/ozad067.727 |
0.161 |
|
2022 |
Barr CM, Chen EY, Nathaniel JE, Lu P, Adams DP, Dingreville R, Boyce BL, Hattar K, Medlin DL. Irradiation-induced grain boundary facet motion: In situ observations and atomic-scale mechanisms. Science Advances. 8: eabn0900. PMID 35687676 DOI: 10.1126/sciadv.abn0900 |
0.15 |
|
2019 |
Rizzi F, Khalil M, Jones R, Templeton J, Ostien J, Boyce B. Bayesian modeling of inconsistent plastic response due to material variability Computer Methods in Applied Mechanics and Engineering. 353: 183-200. DOI: 10.1016/J.Cma.2019.05.012 |
0.147 |
|
2019 |
Boyce BL, Uchic MD. Progress toward autonomous experimental systems for alloy development Mrs Bulletin. 44: 273-280. DOI: 10.1557/Mrs.2019.75 |
0.144 |
|
2006 |
Reu PL, Tanner DM, Epp DS, Parson TB, Boyce BL. Experimental apparatus and software design for dynamic long-term reliability testing of a spring-mass MEMS device Proceedings of Spie - the International Society For Optical Engineering. 6111. DOI: 10.1117/12.648488 |
0.135 |
|
2021 |
Gupta S, Stangebye S, Jungjohann K, Boyce B, Zhu T, Kacher J, Pierron ON. Correction: TEM measurement of activation volume in ultrafine grained gold. Nanoscale. 13: 9040. PMID 33978655 DOI: 10.1039/d1nr90099d |
0.133 |
|
2017 |
Boyce BL, Salzbrenner BC, Rodelas JM, Swiler LP, Madison JD, Jared BH, Shen Y. Extreme-Value Statistics Reveal Rare Failure-Critical Defects in Additive Manufacturing Advanced Engineering Materials. 19: 1700102. DOI: 10.1002/Adem.201700102 |
0.129 |
|
2022 |
Hao H, Hutter T, Boyce BL, Watt J, Liu P, Mitlin D. Review of Multifunctional Separators: Stabilizing the Cathode and the Anode for Alkali (Li, Na, and K) Metal-Sulfur and Selenium Batteries. Chemical Reviews. PMID 35349271 DOI: 10.1021/acs.chemrev.1c00838 |
0.128 |
|
2009 |
Nguyen TD, Jones RE, Boyce BL. Modeling the finite deformation anisotropic viscoelastic behavior of the cornea Proceedings of the Asme Summer Bioengineering Conference, Sbc2008. 781-782. |
0.125 |
|
2009 |
Boyce BL, Brewer LN, Neilsen MK. Dynamic constitutive behavior of eutectic solder at strain-rates up to 200 s-1 Society For Experimental Mechanics - Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2009. 4: 2483-2489. |
0.102 |
|
2021 |
Harrison KL, Goriparti S, Merrill LC, Long DM, Warren B, Roberts SA, Perdue BR, Casias Z, Cuillier P, Boyce BL, Jungjohann KL. Effects of Applied Interfacial Pressure on Li-Metal Cycling Performance and Morphology in 4 M LiFSI in DME. Acs Applied Materials & Interfaces. PMID 34181387 DOI: 10.1021/acsami.1c06488 |
0.097 |
|
2007 |
Nguyen TD, Jones RE, Boyce BL. Modeling the anisotropic finite-deformation viscoelastic behavior of soft fiber-reinforced tissues Proceedings of the Asme Summer Bioengineering Conference 2007, Sbc 2007. 445-446. |
0.094 |
|
1999 |
Jung J, Yan H, Darhmaoui H, Abdelhadi M, Boyce B, Lemberger T. Universal relationship between critical currents and nanoscopic phase separation in high-Tcthin films Superconductor Science and Technology. 12: 1086-1089. DOI: 10.1088/0953-2048/12/12/312 |
0.084 |
|
2012 |
Wilcox CC, Baker MS, Wick DV, Romeo RC, Martin RN, Clark BF, Breivik NL, Boyce BL. Finite element modeling and testing of a deformable carbon fiber reinforced polymer mirror Applied Optics. 51: 2081-2087. DOI: 10.1364/AO.51.002081 |
0.079 |
|
2000 |
Jung J, Boyce B, Yan H, Abdelhadi M, Skinta J, Lemberger T. Journal of Superconductivity: Incorporating Novel Magnetism. 13: 753-757. DOI: 10.1023/A:1007818300517 |
0.072 |
|
1996 |
Hayden A, Niple E, Boyce B. Determination of trace-gas amounts in plumes by the use of orthogonal digital filtering of thermal-emission spectra. Applied Optics. 35: 2802-9. PMID 21085428 DOI: 10.1364/AO.35.002802 |
0.071 |
|
2010 |
Lou J, Lilleodden E, Boyce BL, Lu L, Derlet PM, Weygand D, Li J, Uchic MD, Le Bourhis E. Materials Research Society Symposium Proceedings: Preface Materials Research Society Symposium Proceedings. 1224: xi-xii. |
0.07 |
|
2018 |
Messmer AM, Leong JS, Rondeau EB, Mueller A, Despins CA, Minkley DR, Kent MP, Lien S, Boyce B, Morrison D, Fast MD, Norman JD, Danzmann RG, Koop BF. A 200K SNP chip reveals a novel Pacific salmon louse genotype linked to differential efficacy of emamectin benzoate. Marine Genomics. PMID 29673959 DOI: 10.1016/J.Margen.2018.03.005 |
0.064 |
|
2012 |
Wilcox CC, Baker MS, Wick DV, Romeo RC, Martin RN, Clark BF, Breivik NL, Boyce BL. Design and verification of a finite element model for a thinshelled composite mirror for use with MEMS active optics Proceedings of Spie - the International Society For Optical Engineering. 8253. DOI: 10.1117/12.910928 |
0.062 |
|
2004 |
Horn G, Mackin T, Lesniak J, Boyce B. A NEW APPROACH FOR DETECTING DEFECTS IN BONDED MEMS DEVICES Experimental Techniques. 28: 19-22. DOI: 10.1111/J.1747-1567.2004.Tb00181.X |
0.05 |
|
2006 |
Knorovsky GA, Michael JR, Boyce BL, Janssens KG, Galambos PC. An investigation of focused ion beam deposition as a microjoining technique Imaps International Conference and Exhibition On Device Packaging - Co-Located With the Global Business Council, Gbc 2006 Spring Conference. |
0.045 |
|
1985 |
French R, Boyce B. Satellite Servicing by Teleoperators Journal of Engineering For Industry. 107: 49-54. DOI: 10.1115/1.3185965 |
0.037 |
|
2009 |
Boyce BL, Nguyen TD, Jones RE. Full-field viscoelastic inflation response of bovine cornea Proceedings of the Asme Summer Bioengineering Conference, Sbc2008. 783-784. |
0.029 |
|
2013 |
Saksida SM, Morrison D, McKenzie P, Milligan B, Downey E, Boyce B, Eaves A. Use of Atlantic salmon, Salmo salar L., farm treatment data and bioassays to assess for resistance of sea lice, Lepeophtheirus salmonis, to emamectin benzoate (SLICE(®) ) in British Columbia, Canada. Journal of Fish Diseases. 36: 515-20. PMID 23106395 DOI: 10.1111/jfd.12018 |
0.022 |
|
2019 |
St-Hilaire S, Price D, Noftall S, Boyce B, Morrison D. Evaluating the concentration of emamectin benzoate in Atlantic salmon tissues after sea lice treatments Aquaculture. 498: 464-469. DOI: 10.1016/J.AQUACULTURE.2018.08.071 |
0.01 |
|
2009 |
Barker DE, Braden LM, Coombs MP, Boyce B. Preliminary studies on the isolation of bacteria from sea lice, Lepeophtheirus salmonis, infecting farmed salmon in British Columbia, Canada. Parasitology Research. 105: 1173-7. PMID 19565269 DOI: 10.1007/s00436-009-1523-9 |
0.01 |
|
Hide low-probability matches. |