Year |
Citation |
Score |
2018 |
Liang N, Zhao Y, Li Y, Topping T, Zhu Y, Valiev RZ, Lavernia EJ. Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing Journal of Materials Science. 53: 13173-13185. DOI: 10.1007/S10853-018-2548-1 |
0.586 |
|
2017 |
Liu S, Pan Z, Zhao Y, Topping T, Valiev R, Liao X, Lavernia E, Zhu Y, Wei Q. Effect of strain rate on the mechanical properties of a gum metal with various microstructures Acta Materialia. 132: 193-208. DOI: 10.1016/J.Actamat.2017.04.052 |
0.603 |
|
2017 |
Huang L, Jiang L, Topping TD, Dai C, Wang X, Carpenter R, Haines C, Schoenung JM. In situ oxide dispersion strengthened tungsten alloys with high compressive strength and high strain-to-failure Acta Materialia. 122: 19-31. DOI: 10.1016/J.Actamat.2016.09.034 |
0.522 |
|
2016 |
Jiang L, Hu T, Yang H, Zhang D, Topping T, Lavernia EJ, Schoenung JM. Deformation of a ceramic/metal interface at the nanoscale. Nanoscale. PMID 27147300 DOI: 10.1039/C6Nr02011A |
0.571 |
|
2016 |
Hu T, Ma K, Topping TD, Jiang L, Zhang D, Mukherjee AK, Schoenung JM, Lavernia EJ. Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending Scripta Materialia. 113: 35-38. DOI: 10.1016/J.Scriptamat.2015.10.008 |
0.555 |
|
2016 |
Jiang L, Yang H, Yee JK, Mo X, Topping T, Lavernia EJ, Schoenung JM. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles Acta Materialia. 103: 128-140. DOI: 10.1016/J.Actamat.2015.09.057 |
0.579 |
|
2016 |
Ma K, Hu T, Yang H, Topping T, Yousefiani A, Lavernia EJ, Schoenung JM. Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al-Zn-Mg alloys Acta Materialia. 103: 153-164. DOI: 10.1016/J.Actamat.2015.09.017 |
0.719 |
|
2015 |
Kurmanaeva L, Topping TD, Wen H, Sugahara H, Yang H, Zhang D, Schoenung JM, Lavernia EJ. Strengthening mechanisms and deformation behavior of cryomilled Al-Cu-Mg-Ag alloy Journal of Alloys and Compounds. 632: 591-603. DOI: 10.1016/J.Jallcom.2015.01.160 |
0.676 |
|
2015 |
Hu T, Jiang L, Yang H, Ma K, Topping TD, Yee J, Li M, Mukherjee AK, Schoenung JM, Lavernia EJ. Stabilized plasticity in ultrahigh strength, submicron Al crystals Acta Materialia. 94: 46-58. DOI: 10.1016/J.Actamat.2015.04.044 |
0.62 |
|
2015 |
Jiang L, Wen H, Yang H, Hu T, Topping T, Zhang D, Lavernia EJ, Schoenung JM. Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix Acta Materialia. 89: 327-343. DOI: 10.1016/J.Actamat.2015.01.062 |
0.588 |
|
2015 |
Zhang Y, Sabbaghianrad S, Yang H, Topping TD, Langdon TG, Lavernia EJ, Schoenung JM, Nutt SR. Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5877-5886. DOI: 10.1007/S11661-015-3151-6 |
0.679 |
|
2015 |
Zhang Y, Topping TD, Yang H, Lavernia EJ, Schoenung JM, Nutt SR. Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1196-1204. DOI: 10.1007/S11661-014-2729-8 |
0.639 |
|
2014 |
Huang L, Topping TD, Yang H, Lavernia EJ, Schoenung JM. Nanoscratch-induced deformation behaviour in B 4C particle reinforced ultrafine grained Al alloy composites: A novel diagnostic approach Philosophical Magazine. 94: 1754-1763. DOI: 10.1080/14786435.2014.895442 |
0.634 |
|
2014 |
Hu T, Ma K, Topping TD, Saller B, Yousefiani A, Schoenung JM, Lavernia EJ. Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle Scripta Materialia. 78: 25-28. DOI: 10.1016/J.Scriptamat.2014.01.020 |
0.677 |
|
2014 |
Yang H, Topping TD, Wehage K, Jiang L, Lavernia EJ, Schoenung JM. Tensile behavior and strengthening mechanisms in a submicron B4C-reinforced Al trimodal composite Materials Science and Engineering A. 616: 35-43. DOI: 10.1016/J.Msea.2014.07.079 |
0.686 |
|
2014 |
Ma K, Wen H, Hu T, Topping TD, Isheim D, Seidman DN, Lavernia EJ, Schoenung JM. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy Acta Materialia. 62: 141-155. DOI: 10.1016/J.Actamat.2013.09.042 |
0.701 |
|
2014 |
Harrell TJ, Topping TD, Wen H, Hu T, Schoenung JM, Lavernia EJ. Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 6329-6343. DOI: 10.1007/S11661-014-2569-6 |
0.683 |
|
2014 |
Ma K, Smith T, Hu T, Topping TD, Lavernia EJ, Schoenung JM. Distinct hardening behavior of ultrafine-grained Al-Zn-Mg-Cu alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 4762-4765. DOI: 10.1007/S11661-014-2498-4 |
0.605 |
|
2014 |
Zhang Y, Topping TD, Lavernia EJ, Nutt SR. Dynamic micro-strain analysis of ultrafine-grained aluminum magnesium alloy using digital image correlation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 47-54. DOI: 10.1007/S11661-013-1805-9 |
0.627 |
|
2014 |
Li Z, Zheng B, Wang Y, Topping T, Zhou Y, Valiev RZ, Shan A, Lavernia EJ. Ultrafine-grained Ti-Nb-Ta-Zr alloy produced by ECAP at room temperature Journal of Materials Science. 49: 6656-6666. DOI: 10.1007/S10853-014-8337-6 |
0.759 |
|
2013 |
Topping TD, Ahn B, Nutt SR, Lavernia EJ. Influence of hot isostatic pressing on microstructure and mechanical behaviour of nanostructured Al alloy Powder Metallurgy. 56: 276-287. DOI: 10.1179/1743290112Y.0000000034 |
0.691 |
|
2013 |
Topping TD, Hu T, Manigandan K, Srivatsan TS, Lavernia EJ. Quasi-static deformation and final fracture behaviour of aluminium alloy 5083: Influence of cryomilling Philosophical Magazine. 93: 899-921. DOI: 10.1080/14786435.2012.735774 |
0.661 |
|
2013 |
Hu T, Ma K, Topping TD, Schoenung JM, Lavernia EJ. Precipitation phenomena in an ultrafine-grained Al alloy Acta Materialia. 61: 2163-2178. DOI: 10.1016/J.Actamat.2012.12.037 |
0.656 |
|
2013 |
Wen H, Topping TD, Isheim D, Seidman DN, Lavernia EJ. Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering Acta Materialia. 61: 2769-2782. DOI: 10.1016/J.Actamat.2012.09.036 |
0.679 |
|
2013 |
Liu D, Xiong Y, Li Y, Topping TD, Zhou Y, Haines C, Paras J, Martin D, Kapoor D, Schoenung JM, Lavernia EJ. Spark plasma sintering of nanostructured aluminum: Influence of tooling material on microstructure Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 1908-1916. DOI: 10.1007/S11661-012-1533-6 |
0.608 |
|
2013 |
Abdu MT, Dheda SS, Lavernia EJ, Topping TD, Mohamed FA. Creep and microstructure in ultrafine-grained 5083 Al Journal of Materials Science. 48: 3294-3303. DOI: 10.1007/S10853-012-7115-6 |
0.663 |
|
2012 |
Topping TD, Li Y, Lavernia EJ, Manigandan K, Srivatsan TS. The influence of processing on microstructural development, tensile response and fracture behavior of aluminum alloy 5083 Advanced Materials Research. 410: 175-186. DOI: 10.4028/Www.Scientific.Net/Amr.410.175 |
0.671 |
|
2012 |
Li Y, Topping T, Zhang Z, Vogt R, Schoenung J, Lavernia E. Precipitation in Al 5083/B4C Metal Matrix Composites: A TEM Study Microscopy and Microanalysis. 18: 1902-1903. DOI: 10.1017/S1431927612011361 |
0.52 |
|
2012 |
Magee A, Ladani L, Topping TD, Lavernia EJ. Effects of tensile test parameters on the mechanical properties of a bimodal Al-Mg alloy Acta Materialia. 60: 5838-5849. DOI: 10.1016/J.Actamat.2012.07.024 |
0.676 |
|
2012 |
Topping TD, Ahn B, Li Y, Nutt SR, Lavernia EJ. Influence of process parameters on the mechanical behavior of an ultrafine-grained Al alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 505-519. DOI: 10.1007/S11661-011-0849-Y |
0.731 |
|
2012 |
Liu D, Xiong Y, Topping TD, Zhou Y, Haines C, Paras J, Martin D, Kapoor D, Schoenung JM, Lavernia EJ. Spark plasma sintering of cryomilled nanocrystalline Al alloy - Part II: Influence of processing conditions on densification and properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 340-350. DOI: 10.1007/S11661-011-0841-6 |
0.643 |
|
2012 |
Wen H, Zhao Y, Topping TD, Ashford D, Figueiredo RB, Xu C, Langdon TG, Lavernia EJ. Influence of pressing temperature on microstructure evolution and mechanical behavior of ultrafine-grained cu processed by equal-channel angular pressing Advanced Engineering Materials. 14: 185-194. DOI: 10.1002/Adem.201100080 |
0.614 |
|
2012 |
Topping TD, Chan L, Lavernia EJ. Microstructural evolution of a strain-hardened, ultra-fine grained Al-Mg alloy Materials Science and Technology Conference and Exhibition 2012, Ms and T 2012. 1: 752-759. |
0.663 |
|
2011 |
Zhang Z, Topping T, Li Y, Vogt R, Zhou Y, Haines C, Paras J, Kapoor D, Schoenung JM, Lavernia EJ. Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles Scripta Materialia. 65: 652-655. DOI: 10.1016/J.Scriptamat.2011.06.037 |
0.635 |
|
2011 |
Nelson S, Ladani L, Topping T, Lavernia E. Fatigue and monotonic loading crack nucleation and propagation in bimodal grain size aluminum alloy Acta Materialia. 59: 3550-3570. DOI: 10.1016/J.Actamat.2011.02.029 |
0.604 |
|
2011 |
Ertorer O, Topping TD, Li Y, Moss W, Lavernia EJ. Nanostructured Ti consolidated via spark plasma sintering Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 964-973. DOI: 10.1007/S11661-010-0499-5 |
0.779 |
|
2011 |
Zhao Y, Topping T, Li Y, Lavernia EJ. Strength and Ductility of Bi‐Modal Cu Advanced Engineering Materials. 13: 865-871. DOI: 10.1002/Adem.201100019 |
0.646 |
|
2010 |
Ertorer O, Topping TD, Li Y, Zhao Y, Moss W, Lavernia EJ. Strategies for improving ductility of cryomilled nanostructured titanium Materials Science Forum. 633: 459-469. DOI: 10.4028/Www.Scientific.Net/Msf.633-634.459 |
0.777 |
|
2010 |
Zhao YH, Zhan Q, Topping TD, Li Y, Liu W, Lavernia EJ. Improving ductility in ultrafine grained nickel with porosity and segregation via deformation Materials Science and Engineering A. 527: 1744-1750. DOI: 10.1016/J.Msea.2009.10.064 |
0.676 |
|
2010 |
Zheng B, Topping T, Smugeresky JE, Zhou Y, Biswas A, Baker D, Lavernia EJ. The influence of Ni-coated TiC on laser-deposited IN625 metal matrix composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 568-573. DOI: 10.1007/S11661-009-0126-5 |
0.624 |
|
2010 |
Zhang Z, Dallek S, Vogt R, Li Y, Topping TD, Zhou Y, Schoenung JM, Lavernia EJ. Degassing behavior of nanostructured Al and its composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 532-541. DOI: 10.1007/S11661-009-0089-6 |
0.562 |
|
2010 |
Topping TD, Lavernia EJ, Kuruvilla M, Srivatsan TS. The cyclic fatigue, damage initiation, propagation and fracture behavior of cryomilled aluminum alloy 5083: Influence of secondary processing Fatigue of Materials: Advances and Emergences in Understanding, Held During Materials Science and Technology 2010, Ms and T'10. 147-168. DOI: 10.1002/9781118013373.ch11 |
0.311 |
|
2009 |
Zhao Y, Li Y, Topping TD, Liao X, Zhu Y, Valiev RZ, Lavernia EJ. Ductility of ultrafine-grained copper processed by equal-channel angular pressing International Journal of Materials Research. 100: 1647-1652. DOI: 10.3139/146.110232 |
0.637 |
|
2009 |
Ertorer O, Topping T, Li Y, Moss W, Lavernia EJ. Enhanced tensile strength and high ductility in cryomilled commercially pure titanium Scripta Materialia. 60: 586-589. DOI: 10.1016/J.Scriptamat.2008.12.017 |
0.801 |
|
2009 |
Zhao YH, Guo YZ, Wei Q, Topping TD, Dangelewicz AM, Zhu YT, Langdon TG, Lavernia EJ. Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves Materials Science and Engineering A. 525: 68-77. DOI: 10.1016/J.Msea.2009.06.031 |
0.577 |
|
2009 |
Vogt RG, Zhang Z, Topping TD, Lavernia EJ, Schoenung JM. Cryomilled aluminum alloy and boron carbide nano-composite plate Journal of Materials Processing Technology. 209: 5046-5053. DOI: 10.1016/J.Jmatprotec.2009.02.002 |
0.676 |
|
2009 |
Ertorer O, Zúñga A, Topping T, Moss W, Lavernia EJ. Mechanical behavior of cryomilled CP-Ti consolidated via quasi-isostatic forging Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 91-103. DOI: 10.1007/S11661-008-9688-X |
0.784 |
|
2008 |
Newbery AP, Ahn B, Topping TD, Pao PS, Nutt SR, Lavernia EJ. Large UFG Al alloy plates from cryomilling Journal of Materials Processing Technology. 203: 37-45. DOI: 10.1016/J.Jmatprotec.2007.09.078 |
0.648 |
|
2008 |
Zhao Y, Topping T, Bingert JF, Thornton JJ, Dangelewicz AM, Li Y, Liu W, Zhu Y, Zhou Y, Lavernia EJ. High Tensile Ductility and Strength in Bulk Nanostructured Nickel Advanced Materials. 20: 3028-3033. DOI: 10.1002/Adma.200800214 |
0.568 |
|
Show low-probability matches. |