☰

cached image

John William Morris, Jr. - Publications

Affiliations: 
Materials Science and Mineral Engineering University of California, Berkeley, Berkeley, CA, United States 
Area:
design and behavior analysis of metals and alloys
Website:
http://www.mse.berkeley.edu/faculty/Morris/morris.html
Tree Info Similar researchers PubMed Report error

189 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2019 Zhang R, Zhao S, Ophus C, Deng Y, Vachhani SJ, Ozdol B, Traylor R, Bustillo KC, Morris JW, Chrzan DC, Asta M, Minor AM. Direct imaging of short-range order and its impact on deformation in Ti-6Al. Science Advances. 5: eaax2799. PMID 31853495 DOI: 10.1126/Sciadv.Aax2799  0.572
2019 Xu Y, Hu C, Liu L, Wang J, Rao W, Morris JW, Khachaturyan AG. A nano-embryonic mechanism for superelasticity, elastic softening, invar and elinvar effects in defected pre-transitional materials Acta Materialia. 171: 240-252. DOI: 10.1016/J.Actamat.2019.04.027  0.337
2018 Sankaran RP, Ozdol VB, Ophus C, Kacher J, Gammer C, Govindjee S, Minor AM, Morris JW. Multiscale analysis of nanoindentation-induced defect structures in gum metal Acta Materialia. 151: 334-346. DOI: 10.1016/J.Actamat.2018.03.048  0.558
2017 Kinney C, Yi I, Pytlewski K, Khachaturyan A, Kim N, Morris J. The microstructure of as-quenched 12Mn steel Acta Materialia. 125: 442-454. DOI: 10.1016/J.Actamat.2016.12.001  0.368
2016 Morris JW. The Microstructure of Dislocated Martensitic Steel: Microscopy and Microanalysis Microscopy and Microanalysis. 22: 1226-1227. DOI: 10.1017/S1431927616006978  0.354
2016 Kinney C, Pytlewski K, Qi L, Khachaturyan AG, Morris JW. An Investigation Into 6-Fold Symmetry in Martensitic Steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 5266-5270. DOI: 10.1007/S11661-016-3710-5  0.333
2015 de Jong M, Kacher J, Sluiter MH, Qi L, Olmsted DL, van de Walle A, Morris JW, Minor AM, Asta M. Electronic Origins of Anomalous Twin Boundary Energies in Hexagonal Close Packed Transition Metals. Physical Review Letters. 115: 065501. PMID 26296121 DOI: 10.1103/Physrevlett.115.065501  0.533
2015 Yu Q, Qi L, Tsuru T, Traylor R, Rugg D, Morris JW, Asta M, Chrzan DC, Minor AM. Metallurgy. Origin of dramatic oxygen solute strengthening effect in titanium. Science (New York, N.Y.). 347: 635-9. PMID 25657243 DOI: 10.1126/Science.1260485  0.584
2014 Sankaran RP, Ophus C, Ozdol B, Radmilovic VR, Minor AM, Morris JW. HAADF imaging of the omega (ω) phase in a gum metal-related alloy Philosophical Magazine. 94: 2900-2912. DOI: 10.1080/14786435.2014.937839  0.539
2014 Yu Q, Mishra RK, Morris JW, Minor AM. The effect of size on dislocation cell formation and strain hardening in aluminium Philosophical Magazine. 94: 2062-2071. DOI: 10.1080/14786435.2014.906755  0.532
2014 Qi L, Khachaturyan AG, Morris JW. The microstructure of dislocated martensitic steel: Theory Acta Materialia. 76: 23-39. DOI: 10.1016/J.Actamat.2014.04.038  0.36
2014 Kinney CC, Pytlewski KR, Khachaturyan AG, Morris JW. The microstructure of lath martensite in quenched 9Ni steel Acta Materialia. 69: 372-385. DOI: 10.1016/J.Actamat.2014.01.058  0.352
2014 Linares X, Kinney C, Lee KO, Morris JW. The influence of Sn orientation on intermetallic compound evolution in idealized Sn-Ag-Cu 305 interconnects: An electron backscatter diffraction study of electromigration Journal of Electronic Materials. 43: 43-51. DOI: 10.1007/S11664-013-2789-3  0.315
2013 Morris JW, Kinney C, Pytlewski K, Adachi Y. Microstructure and cleavage in lath martensitic steels. Science and Technology of Advanced Materials. 14: 014208. PMID 27877556 DOI: 10.1088/1468-6996/14/1/014208  0.356
2013 Yu Q, Sun J, Morris JW, Minor AM. Source mechanism of non-basal âc + â slip in Ti alloy Scripta Materialia. 69: 57-60. DOI: 10.1016/J.Scriptamat.2013.03.009  0.536
2013 Furuta T, Kuramoto S, Morris JW, Nagasako N, Withey E, Chrzan DC. The mechanism of strength and deformation in Gum Metal Scripta Materialia. 68: 767-772. DOI: 10.1016/J.Scriptamat.2013.01.027  0.409
2013 Lee KO, Morris JW, Hua F. Mechanisms of creep deformation in pure Sn solder joints Journal of Electronic Materials. 42: 516-526. DOI: 10.1007/S11664-012-2380-3  0.374
2013 Lee KO, Morris JW, Hua F. Transformation-induced plasticity in Sn-In solder joints Journal of Electronic Materials. 42: 168-178. DOI: 10.1007/S11664-012-2335-8  0.346
2013 Kinney C, Linares X, Lee KO, Morris JW. The effect of Sn orientation on intermetallic compound growth in idealized Sn-Cu-Ag interconnects Journal of Electronic Materials. 42: 607-615. DOI: 10.1007/S11664-012-2306-0  0.303
2012 Lee KO, Morris JW, Hua F. Martensitic transformation in Sn-Rich SnIn solder joints Journal of Electronic Materials. 41: 336-351. DOI: 10.1007/S11664-011-1818-3  0.337
2011 Morris JW, Chrzan DC, Kuramoto S. Anomalous transformation-induced deformation in gum metal Key Engineering Materials. 465: 21-28. DOI: 10.4028/Www.Scientific.Net/Kem.465.21  0.315
2010 Chrzan DC, Sherburne MP, Hanlumyuang Y, Li T, Morris JW. Spreading of dislocation cores in elastically anisotropic body-centered-cubic materials: The case of gum metal Physical Review B - Condensed Matter and Materials Physics. 82. DOI: 10.1103/Physrevb.82.184202  0.355
2010 Lowry M, Kiener D, LeBlanc M, Chisholm C, Florando J, Morris J, Minor A. Mitigating Focused Ion Beam Damage in Molybdenum Nanopillars by In Situ Annealing Microscopy and Microanalysis. 16: 1748-1749. DOI: 10.1017/S1431927610061957  0.444
2010 Lowry MB, Kiener D, Leblanc MM, Chisholm C, Florando JN, Morris JW, Minor AM. Achieving the ideal strength in annealed molybdenum nanopillars Acta Materialia. 58: 5160-5167. DOI: 10.1016/J.Actamat.2010.05.052  0.497
2010 Morris JW, Hanlumyuang Y, Sherburne M, Withey E, Chrzan DC, Kuramoto S, Hayashi Y, Hara M. Anomalous transformation-induced deformation in 〈1 1 0〉 textured Gum Metal Acta Materialia. 58: 3271-3280. DOI: 10.1016/J.Actamat.2010.02.001  0.313
2010 Withey EA, Minor AM, Chrzan DC, Morris JW, Kuramoto S. The deformation of Gum Metal through in situ compression of nanopillars Acta Materialia. 58: 2652-2665. DOI: 10.1016/J.Actamat.2009.12.052  0.571
2010 Lee KO, Morris JW, Hua F. Influence of the substrate on the creep of Sn solder joints Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 1805-1814. DOI: 10.1007/S11661-010-0214-6  0.351
2010 Withey EA, Ye J, Minor AM, Kuramoto S, Chrzan DC, Morris JW. Nanomechanical testing of gum metal Proceedings of the Society For Experimental Mechanics, Inc.. 67: 37-45. DOI: 10.1007/S11340-008-9210-9  0.554
2009 Magid KR, Florando JN, Lassila DH, Leblanc MM, Tamura N, Morris JW. Mapping mesoscale heterogeneity in the plastic deformation of a copper single crystal Philosophical Magazine. 89: 77-107. DOI: 10.1080/14786430802558577  0.301
2009 Luo W, Cohen ML, Morris JW. On the possibility of cleavage in Nb Philosophical Magazine Letters. 89: 23-32. DOI: 10.1080/09500830802585097  0.336
2009 Kinney C, Lee TK, Liu KC, Morris JW. The interaction between an imposed current and the creep of idealized Sn-Ag-Cu solder interconnects Journal of Electronic Materials. 38: 2585-2591. DOI: 10.1007/S11664-009-0851-Y  0.325
2009 Kinney C, Morris JW, Lee TK, Liu KC, Xue J, Towne D. The influence of an imposed current on the creep of Sn-Ag-Cu solder Journal of Electronic Materials. 38: 221-226. DOI: 10.1007/S11664-008-0568-3  0.306
2008 Withey E, Jin M, Minor A, Kuramoto S, Chrzan DC, Morris JW. The deformation of "Gum Metal" in nanoindentation Materials Science and Engineering A. 493: 26-32. DOI: 10.1016/J.Msea.2007.07.097  0.586
2007 Li T, Morris JW, Nagasako N, Kuramoto S, Chrzan DC. "Ideal" engineering alloys. Physical Review Letters. 98: 105503. PMID 17358546 DOI: 10.1103/Physrevlett.98.105503  0.373
2007 Minor AM, Stach EA, Morris JW. Chapter 78 In situ Nanoindentation in a Transmission Electron Microscope Dislocations in Solids. 13: 453-497. DOI: 10.1016/S1572-4859(07)80010-6  0.401
2007 Warren OL, Shan Z, Asif SAS, Stach EA, Morris JW, Minor AM. In situ nanoindentation in the TEM Materials Today. 10: 59-60. DOI: 10.1016/S1369-7021(07)70051-2  0.459
2007 Jin M, Minor AM, Morris JW. Strain-induced coarsening in nano-grained films Thin Solid Films. 515: 3202-3207. DOI: 10.1016/J.Tsf.2006.01.052  0.549
2007 Morris JW, Jin M, Minor AM. In situ studies of the transmission of strain across grain boundaries Materials Science and Engineering A. 462: 412-417. DOI: 10.1016/J.Msea.2006.02.461  0.536
2006 Ohmura T, Minor A, Tsuzaki K, Morris JW. Indentation-induced deformation behavior in martensitic steel observed through in-situ nanoindentation in a transmission electron microscopy Materials Science Forum. 239-244. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.239  0.539
2006 Li T, Morris JW, Chrzan DC. Ab initio study of the ideal shear strength and elastic deformation behaviors of B2 FeAl and NiAl Physical Review B - Condensed Matter and Materials Physics. 73. DOI: 10.1103/Physrevb.73.024105  0.329
2006 Ge D, Minor AM, Stach EA, Morris JW. Size effects in the nanoindentation of silicon at ambient temperature Philosophical Magazine. 86: 4069-4080. DOI: 10.1080/14786430600586507  0.519
2005 Magid KR, Lilleodden ET, Tamura N, Florando JN, Lassila DH, Leblanc MM, Barabash RI, Morris JW. X-ray microdiffraction characterization of deformation heterogeneities in BCC crystals Materials Research Society Symposium Proceedings. 840: 181-186. DOI: 10.1557/Proc-840-Q7.2  0.334
2005 Jin M, Minor AM, Ge D, Morris JW. Study of deformation behavior of ultrafine-grained materials through in situ nanoindentation in a transmission electron microscope Journal of Materials Research. 20: 1735-1740. DOI: 10.1557/Jmr.2005.0216  0.552
2005 Minor AM, Lilleodden ET, Jin M, Stach EA, Chrzan DC, Morris JW. Room temperature dislocation plasticity in silicon Philosophical Magazine. 85: 323-330. DOI: 10.1080/14786430412331315680  0.547
2005 Guo Z, Morris JW. Martensite variants generated by the mechanical transformation of precipitated interlath austenite Scripta Materialia. 53: 933-936. DOI: 10.1016/J.Scriptamat.2005.06.027  0.365
2005 Bang WH, Oh KH, Jung JP, Morris JW, Hua F. The correlation between stress relaxation and steady-state creep of eutectic Sn-Pb Journal of Electronic Materials. 34: 1287-1300. DOI: 10.1007/S11664-005-0252-9  0.309
2004 Minor AM, Lilleodden ET, Stach EA, Morris JW. Direct observations of incipient plasticity during nanoindentation of Al Journal of Materials Research. 19: 176-182. DOI: 10.1557/Jmr.2004.19.1.176  0.55
2004 Ohmura T, Minor AM, Stach EA, Morris JW. Dislocation-grain boundary interactions in martensitic steel observed through in situ nanoindentation in a transmission electron microscope Journal of Materials Research. 19: 3626-3632. DOI: 10.1557/Jmr.2004.0474  0.537
2004 Li T, Morris JW, Chrzan DC. Ideal tensile strength of B2 transition-metal aluminides Physical Review B - Condensed Matter and Materials Physics. 70. DOI: 10.1103/Physrevb.70.054107  0.309
2004 Stach EA, Gopal V, Jin M, Alsem DH, Williamson MJ, Minor A, Radmilovic V, Muhlstein CL, Morris JW, Ritchie RO. Using the electron microscope to explore reliability in microelectromechanical systems and nanostructured materials Microscopy and Microanalysis. 10: 354-355. DOI: 10.1017/S1431927604886240  0.473
2004 Soer WA, De Hosson JTM, Minor AM, Morris JW, Stach EA. Effects of solute Mg on grain boundary and dislocation dynamics during nanoindentation of Al-Mg thin films Acta Materialia. 52: 5783-5790. DOI: 10.1016/J.Actamat.2004.08.032  0.53
2004 Guo Z, Lee CS, Morris JW. On coherent transformations in steel Acta Materialia. 52: 5511-5518. DOI: 10.1016/J.Actamat.2004.08.011  0.353
2004 Jin M, Minor AM, Stach EA, Morris JW. Direct observation of deformation-induced grain growth during the nanoindentation of ultrafine-grained Al at room temperature Acta Materialia. 52: 5381-5387. DOI: 10.1016/J.Actamat.2004.07.044  0.553
2003 Clatterbuck DM, Krenn CR, Cohen ML, Morris JW. Phonon instabilities and the ideal strength of aluminum. Physical Review Letters. 91: 135501. PMID 14525313 DOI: 10.1103/Physrevlett.91.135501  0.307
2003 Minor AM, Lilleodden ET, Jin M, Stach EA, Chrzan D, Morris JW, Friedmann TA, Xiao X, Auciello OH, Carlisle JA. In-situ nanoindentation - A unique probe of deformation response in materials Microscopy and Microanalysis. 9: 900-901. DOI: 10.1017/S1431927603444504  0.497
2003 Clatterbuck DM, Chrzan DC, Morris JW. The ideal strength of iron in tension and shear Acta Materialia. 51: 2271-2283. DOI: 10.1016/S1359-6454(03)00033-8  0.32
2003 Minor AM, Stach EA, Morris JW, Petrov I. In-situ nanoindentation of epitaxial TiN/MgO (001) in a transmission electron microscope Journal of Electronic Materials. 32: 1023-1027. DOI: 10.1007/S11664-003-0084-4  0.522
2003 Mitlin D, Radmilovic V, Morris JW, Dahmen U. On the influence of Si-Ge additions on the aging response of Al-Cu Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 735-742. DOI: 10.1007/S11661-003-1001-4  0.568
2003 Wu Y, Hwang SK, Morris JW. Development and elemental powder metallurgy of a Y-containing two-phase TiAl alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 2077-2087. DOI: 10.1007/S11661-003-0272-0  0.337
2003 Radmilovic V, Mitlin D, Tolley AJ, Dahmen U, Morris JW. Resistance to shape refinement of precipitates in Al-(Si,Ge) alloys during thermal cycling Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 543-551. DOI: 10.1007/S11661-003-0090-4  0.527
2003 Soer WA, De Hosson JTM, Minor AM, Stach EA, Morris JW. Direct observations of grain boundary phenomena during indentation of Al and Al-Mg thin films Materials Research Society Symposium - Proceedings. 795: 369-374.  0.478
2003 Minor AM, Stach EA, Morris JW, Petrov I. In-situ nanoindentation of epitaxial TiN/MgO (001) in a transmission electron microscope Journal of Electronic Materials. 32: 1023-1027.  0.462
2002 Radmilovic V, Dahmen U, Dracup B, Miller MK, Mitlin D, Morris JW. Clustering and precipitation in Al-Si-Ge and Al-Si-Ge-Cu alloys Materials Science Forum. 396: 905-910. DOI: 10.4028/Www.Scientific.Net/Msf.396-402.905  0.568
2002 Minor AM, Lilleodden ET, Stach EA, Morris JW. A method for extracting quantitative data during in-situ TEM nanoindentation Materials Research Society Symposium - Proceedings. 695: 165-171. DOI: 10.1557/Proc-695-L4.4.1  0.44
2002 Krenn CR, Roundy D, Cohen ML, Chrzan DC, Morris JW. Connecting atomistic and experimental estimates of ideal strength Physical Review B. 65. DOI: 10.1103/Physrevb.65.134111  0.332
2002 Minor AM, Lilleodden ET, Stach EA, Morris JW. In-situ transmission electron microscopy study of the nanoindentation behavior of Al Journal of Electronic Materials. 31: 958-964. DOI: 10.1007/S11664-002-0028-4  0.519
2002 Song HG, Morris JW, Hua F. The creep properties of lead-free solder joints Jom. 54: 30-32. DOI: 10.1007/Bf02701846  0.329
2001 Stach EA, Freeman T, Minor AM, Owen DK, Cumings J, Wall MA, Chraska T, Hull R, Morris JW, Jr A, Zettl U. Development of a Nanoindenter for In Situ Transmission Electron Microscopy. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 7: 507-517. PMID 12597795 DOI: 10.1007/S10005-001-0012-4  0.476
2001 Jhi SH, Louie SG, Cohen ML, Morris JW. Mechanical instability and ideal shear strength of transition metal carbides and nitrides. Physical Review Letters. 87: 075503. PMID 11497899 DOI: 10.1103/Physrevlett.87.075503  0.358
2001 Morris JW, Guo Z, Krenn CR, Kim Y-. The Limits of Strength and Toughness in Steel Isij International. 41: 599-611. DOI: 10.2355/Isijinternational.41.599  0.367
2001 Clatterbuck DM, Lee TK, Shaw TJ, Heinig NF, Cho HM, Clarke J, Morris JW. Detection of plastic deformation gradients in steel using scanning SQUID microscopy Ieee Transactions On Applied Superconductivity. 11: 1307-1310. DOI: 10.1109/77.919590  0.388
2001 Roundy D, Krenn CR, Cohen ML, Morris JW. The ideal strength of tungsten Philosophical Magazine. 81: 1725-1747. DOI: 10.1080/01418610108216634  0.309
2001 Minor AM, Morris JW, Stach EA. Quantitative in situ nanoindentation in an electron microscope Applied Physics Letters. 79: 1625-1627. DOI: 10.1063/1.1400768  0.567
2001 Watanabe Y, Kang SH, Chan JW, Morris JW, Shaw TJ, Clarke J. Observation of magnetic gradients in stainless steel with a high-Tc superconducting quantum interference device microscope Journal of Applied Physics. 89: 1977-1982. DOI: 10.1063/1.1334637  0.31
2001 Krenn CR, Roundy D, Morris JW, Cohen ML. The non-linear elastic behavior and ideal shear strength of Al and Cu Materials Science and Engineering A. 317: 44-48. DOI: 10.1016/S0921-5093(01)01178-9  0.312
2001 Krenn CR, Roundy D, Morris JW, Cohen ML. Ideal strengths of bcc metals Materials Science and Engineering A. 319: 111-114. DOI: 10.1016/S0921-5093(01)00998-4  0.314
2001 Mitlin D, Dahmen U, Radmilovic V, Morris JW. Precipitation and hardening in Al-Si-Ge Materials Science and Engineering A. 301: 231-236. DOI: 10.1016/S0921-5093(00)01799-8  0.56
2001 Morris JW, Krenn CR, Roundy D, Cohen ML. Deformation of the limit of elastic stability Materials Science and Engineering A. 309: 121-124. DOI: 10.1016/S0921-5093(00)01735-4  0.308
2001 Song HG, Ahn JP, Morris JW. The microstructure of eutectic Au-Sn solder bumps on Cu/electroless Ni/Au Journal of Electronic Materials. 30: 1083-1087. DOI: 10.1007/S11664-001-0133-9  0.353
2001 Song HG, Ahn JP, Minor AM, Morris JW. Au-Ni-Sn intermetallic phase relationships in eutectic Pb-Sn solder formed on Ni/Au metallization Journal of Electronic Materials. 30: 409-414. DOI: 10.1007/S11664-001-0052-9  0.537
2001 Mitlin D, Radmilovic V, Dahmen U, Morris JW. Precipitation and aging in Al-Si-Ge-Cu Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 197-199. DOI: 10.1007/S11661-998-0335-3  0.478
2001 Mitlin D, Radmilovic V, Dahmen U, Morris JW. The microstructure and properties of Al-Si-Ge-Cu alloys Advances in the Metallurgy of Aluminum Alloys. 239-242.  0.531
2000 Morris JW, Krenn CR. The internal stability of an elastic solid Philosophical Magazine a: Physics of Condensed Matter, Structure, Defects and Mechanical Properties. 80: 2827-2840. DOI: 10.1080/01418610008223897  0.3
2000 Song HG, Morris JW, Mccormack MT. The microstructure of ultrafine eutectic Au-Sn solder joints on Cu Journal of Electronic Materials. 29: 1038-1046. DOI: 10.1007/S11664-000-0170-9  0.346
2000 Minor AM, Morris JW. Inhibiting growth of the Au0.5Ni0.5Sn4 intermetallic layer in Pb-Sn solder joints reflowed on Au/Ni metallization Journal of Electronic Materials. 29: 1170-1174. DOI: 10.1007/S11664-000-0009-4  0.515
2000 Minor AM, Morris JW. Growth of a Au-Ni-Sn intermetallic compound on the solder-substrate interface after aging Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 798-800. DOI: 10.1007/S11661-000-0022-5  0.506
2000 Mitlin D, Radmilovic V, Morris JW. Catalyzed precipitation in Al-Cu-Si Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 2697-2711. DOI: 10.1007/Bf02830329  0.56
1999 Minor AM, Morris JW. Growth of a Au-Ni-Sn intermetallic compound on the solder-substrate interface after aging (thesis) Lawrence Berkeley National Laboratory. DOI: 10.2172/753105  0.518
1999 Morris JW. Metallurgical control of the ductile-brittle transition in high-strength structural steels Materials Research Society Symposium - Proceedings. 539: 23-27. DOI: 10.1557/Proc-539-23  0.344
1999 Roundy D, Krenn CR, Cohen ML, Morris JW. Ideal Shear Strengths of fcc Aluminum and Copper Physical Review Letters. 82: 2713-2716. DOI: 10.1103/Physrevlett.82.2713  0.342
1999 Reynolds HL, Rang SH, Morris JW. The creep behavior of in-ag eutectic solder joints Journal of Electronic Materials. 28: 69-75. DOI: 10.1007/S11664-999-0197-5  0.323
1998 Kim HJ, Kim YH, Morris JW. Thermal mechanisms of grain and packet refinement in a lath martensitic steel Isij International. 38: 1277-1285. DOI: 10.2355/Isijinternational.38.1277  0.342
1997 Kim CU, Morris JW, Lee HM. Kinetics of electromigration-induced edge drift in Al-Cu thin-film interconnects Journal of Applied Physics. 82: 1592-1598. DOI: 10.1063/1.365948  0.318
1996 Kim CU, Morris JW, Genin FY, Fluss MJ. Influence of solute additions on electromigration in aluminum Materials Research Society Symposium - Proceedings. 428: 213-218. DOI: 10.1557/Proc-428-213  0.331
1996 Yoo CH, Lee HM, Chan JW, Morris JW. M 2C precipitates in isothermal tempering of high Co-Ni secondary hardening steel Metallurgical and Materials Transactions A. 27: 3466-3472. DOI: 10.1007/Bf02595438  0.324
1995 Kang SH, Kim C, Genin FY, Morris JW. The influence of grain structure on the reliability of narrow Al- based interconnects Mrs Proceedings. 391: 385-390. DOI: 10.1557/Proc-391-385  0.309
1995 Morris JW, Kim C, Kang SH. Microstructural control of internal electromigration failure in narrow Al-Cu-Si lines Materials Research Society Symposium - Proceedings. 391: 353-359. DOI: 10.1557/Proc-391-353  0.306
1995 Kim Cu, Kang SH, Genin FY, Morris JW. Mechanism of electromigration failure in Al thin film interconnects containing SC Materials Research Society Symposium - Proceedings. 391: 289-294. DOI: 10.1557/Proc-391-289  0.306
1994 Kim C, Selitser SI, Morris JW. Influence of microstructure on the resistivity of Al‐Cu‐Si thin‐film interconnects Journal of Applied Physics. 75: 879-884. DOI: 10.1063/1.356442  0.342
1994 Selitser SI, Morris JW. Substructure formation during plastic deformation Acta Metallurgica Et Materialia. 42: 3985-3991. DOI: 10.1016/0956-7151(94)90175-9  0.316
1994 Goldstein JLF, Morris JW. Microstructural development of eutectic Bi-Sn and eutectic In-Sn during high temperature deformation Journal of Electronic Materials. 23: 477-486. DOI: 10.1007/Bf02671233  0.36
1994 Kramer PA, Glazer J, Morris JW. The effect of low gold concentrations on the creep of eutectic tin-lead joints Metallurgical and Materials Transactions A. 25: 1249-1257. DOI: 10.1007/Bf02652299  0.369
1994 Bartels F, Morris JW, Dalke G, Gust W. Intermetallic phase formation in thin solid-liquid diffusion couples Journal of Electronic Materials. 23: 787-790. DOI: 10.1007/Bf02651374  0.345
1994 Freer Goldstein JL, Morris JW. The effect of substrate on the microstructure and creep of eutectic In-Sn Metallurgical and Materials Transactions A. 25: 2715-2722. DOI: 10.1007/Bf02649224  0.345
1994 Chu D, Morris JW. Influence of Grain Structure and Solute Composition on the Work Hardening Behavior of Aluminum at Cryogenic Temperatures Advances in Cryogenic Engineering. 40: 1355-1362. DOI: 10.1007/978-1-4757-9053-5_172  0.333
1993 Kim C, Morris JW. The mechanism of electromigration failure of narrow Al‐2Cu‐1Si thin‐film interconnects Journal of Applied Physics. 73: 4885-4893. DOI: 10.1063/1.353806  0.308
1993 Morris JW, Goldstein JLF, Mei Z. Microstructure And Mechanical Properties Of Sn-In And Sn-Bi Solders Jom. 45: 25-27. DOI: 10.1007/Bf03222376  0.364
1992 Kim C, Morris JW. The influence of Cu precipitation on electromigration failure in Al-Cu-Si Journal of Applied Physics. 72: 1837-1845. DOI: 10.1063/1.351655  0.314
1992 Sanchez JE, McKnelly LT, Morris JW. Slit morphology of electromigration induced open circuit failures in fine line conductors Journal of Applied Physics. 72: 3201-3203. DOI: 10.1063/1.351484  0.306
1992 Sunwoo AJ, Morris JW, Lucey GK. The growth of Cu-Sn intermetallics at a pretinned copper-solder interface Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 23: 1323-1332. DOI: 10.1007/Bf02665064  0.304
1992 Mei Z, Morris JW. Superplastic creep of low melting point solder joints Journal of Electronic Materials. 21: 401-407. DOI: 10.1007/Bf02660403  0.336
1992 Freer JL, Morris JW. Microstructure and creep of eutectic indium/tin on copper and nickel substrates Journal of Electronic Materials. 21: 647-652. DOI: 10.1007/Bf02655434  0.377
1992 Mei Z, Morris JW. Characterization of eutectic Sn-Bi solder joints Journal of Electronic Materials. 21: 599-607. DOI: 10.1007/Bf02655427  0.339
1991 Sanchez JE, McKnelly LT, Morris JW. Θ CuAl 2 Precipitate Coarsening in Al-2% Cu Thin Films Mrs Proceedings. 230: 67. DOI: 10.1557/Proc-230-67  0.354
1991 Sanchez JE, Morris JW. Microstructural Analysis of Electromigration-Induced Voids and Hillocks Mrs Proceedings. 225: 53. DOI: 10.1557/Proc-225-53  0.316
1991 Mei Z, Morris JW, Shine MC. Superplastic Creep of Eutectic Tin-Lead Solder Joints Journal of Electronic Packaging. 113: 109-114. DOI: 10.1115/1.2905375  0.355
1991 Bradley EL, Emigh RA, Morris JW. Superplastic properties of an Al2.4Mg1.8Li0.5Sc alloy Scripta Metallurgica Et Materialia. 25: 717-721. DOI: 10.1016/0956-716X(91)90121-G  0.37
1991 Mei Z, Morris JW, Shine MC, Summers TSE. Effects of cooling rate on mechanical properties of near-eutectic tin-lead solder joints Journal of Electronic Materials. 20: 599-608. DOI: 10.1007/Bf02669524  0.347
1991 Hwang SK, Ryoo HS, Morris JW. Effects of transformation on texture and iodine stress corrosion cracking resistance of zircaloy sheet Metallurgical Transactions A. 22: 2247-2256. DOI: 10.1007/Bf02664990  0.318
1991 Sunwoo AJ, Morris JW. Aging characteristics of electron beam and gas tungsten arc fusion zones of Al-Cu-Li alloy 2090 Metallurgical Transactions. a, Physical Metallurgy and Materials Science. 22: 903-913. DOI: 10.1007/Bf02659000  0.344
1991 Chu D, Morris JW. The effect of through-thickness anisotropy on the cryogenic mechanical properties of an Al-Cu-Li-Zr alloy (Vintage III 2090-T81) Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 22: 1789-1799. DOI: 10.1007/Bf02646503  0.361
1990 Shine MC, Seyyedi J, Massingill T, Mei Z, Morris JW. Application of Superplasticity in Solder Joints Mrs Proceedings. 203. DOI: 10.1557/Proc-203-425  0.318
1990 Summers TSE, Morris JW. Isothermal Fatigue Behavior of Sn-Pb Solder Joints Journal of Electronic Packaging. 112: 94-99. DOI: 10.1115/1.2904364  0.335
1990 Tribula DB, Morris JW. Creep in Shear of Experimental Solder Joints Journal of Electronic Packaging. 112: 87-93. DOI: 10.1115/1.2904363  0.383
1990 Mei Z, Grivas D, Shine MC, Morris JW. Superplastic creep of eutectic tin-lead solder joints Journal of Electronic Materials. 19: 1273-1280. DOI: 10.1007/Bf02673342  0.345
1990 Sanchez JE, McKnelly LT, Morris JW. Morphology of electromigration-induced damage and failure in Al alloy thin film conductors Journal of Electronic Materials. 19: 1213-1220. DOI: 10.1007/Bf02673335  0.324
1990 Frear DR, Sanchez JE, Romig AD, Morris JW. The evolution of microstructure in Al-2 Pct Cu thin films: Precipitation, dissolution, and reprecipitation Metallurgical Transactions A. 21: 2449-2458. DOI: 10.1007/Bf02646989  0.348
1990 Sunwoo AJ, Bradley EL, Morris JW. Effects of heat-affected zone peak temperatures on the microstructure and properties of 2090 Al alloy Metallurgical Transactions. a, Physical Metallurgy and Materials Science. 21: 2795-2804. DOI: 10.1007/Bf02646074  0.302
1989 Morris JW, Grivas D, Tribula D, Summers T, Frear D. Research on the Mechanism of Thermal Fatigue in Near‐eutectic Pb‐Sn Solders Soldering & Surface Mount Technology. 1: 4-20. DOI: 10.1108/Eb037685  0.317
1989 Frear DR, Posthill JB, Morris JW. The microstructural details of β-Sn precipitation in a 5Sn-95Pb solder alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 20: 1325-1333. DOI: 10.1007/Bf02665491  0.32
1988 Mei Z, Fultz B, Morris JW. Intensities of backscatter Mössbauer spectra Journal of Applied Physics. 64: 2550-2555. DOI: 10.1063/1.341641  0.493
1988 Dietderich D, Tribula D, Morris J. The Nb3Sn grain structure evolution in bronze-processed multifilamentary superconducting wire Journal of the Less Common Metals. 139: 79-85. DOI: 10.1016/0022-5088(88)90331-1  0.32
1988 Khachaturyan AG, Semenovskaya SV, Morris JW. Theoretical analysis of strain-induced shape changes in cubic precipitates during coarsening Acta Metallurgica. 36: 1563-1572. DOI: 10.1016/0001-6160(88)90224-6  0.354
1988 Glazer J, Morris JW. The effect of the precipitate size distribution on the aging curve of order hardening alloys Acta Metallurgica. 36: 907-915. DOI: 10.1016/0001-6160(88)90145-9  0.358
1988 Frear DR, Grivas D, Morris JW. Thermal Fatigue in Solder Joints Jom. 40: 18-22. DOI: 10.1007/Bf03258168  0.315
1988 Tomota Y, Strum M, Morris JW. Tensile deformation behavior of mechanically stabilized Fe-Mn austenite Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 19: 1563-1568. DOI: 10.1007/Bf02674030  0.385
1988 Khachaturyan AG, Lindsey TF, Morris JW. Theoretical investigation of the precipitation of δ' in Al-Li Metallurgical Transactions A. 19: 249-258. DOI: 10.1007/Bf02652533  0.311
1988 Tribula D, Grivas D, Morris JW. Stress relaxation in 60Sn-40Pb solder joints Journal of Electronic Materials. 17: 387-390. DOI: 10.1007/Bf02652123  0.314
1987 Tomota Y, Strum M, Morris JW. The relationship between toughness and microstructure in Fe-high Mn binary alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 18: 1073-1081. DOI: 10.1007/Bf02668556  0.363
1987 Quan L, Frear D, Grivas D, Morris JW. Tensile behavior of Pb-Sn solder/Cu joints Journal of Electronic Materials. 16: 203-208. DOI: 10.1007/Bf02655488  0.345
1987 Frear D, Grivas D, Morris JW. The effect of Cu 6 Sn 5 whisker precipitates in bulk 60Sn-40Pb solder Journal of Electronic Materials. 16: 181-186. DOI: 10.1007/Bf02655484  0.317
1987 Chang KM, Huang SC, Taub AI, Chang GM, Morris JW. Cryogenic properties of a P/M Ni3Al-B alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 18: 1819-1820. DOI: 10.1007/Bf02646213  0.35
1987 Glazer J, Verzasconi SL, Sawtell RR, Morris JW. Mechanical behavior of aluminum-lithium alloys at cryogenic temperatures Metallurgical Transactions A. 18: 1695-1701. DOI: 10.1007/Bf02646201  0.385
1986 Fultz B, Morris JW. Temperature dependence of hyperfine magnetic fields in Fe-Ni. Physical Review. B, Condensed Matter. 34: 4480-4489. PMID 9940238 DOI: 10.1103/Physrevb.34.4480  0.516
1986 Frear D, Grivas D, Quan L, Morris JW. Microstructural Observations and Mechanical Behavior of Pb-Sn Solder on Copper Plates Mrs Proceedings. 72. DOI: 10.1557/Proc-72-181  0.313
1986 Fultz B, Morris JW. Effects of high magnetic fields on the flow stress of 18-8 stainless steels Acta Metallurgica. 34: 379-384. DOI: 10.1016/0001-6160(86)90073-8  0.531
1986 Fultz B, Kopa R, Morris JW. Software Feedback Control for Materials Testing Systems Jom. 38: 58-58. DOI: 10.1007/Bf03257874  0.477
1986 Kim YH, Kim HJ, Morris JW. The influence of precipitated austenite on hydrogen embrittlement in 5.5Ni steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 17: 1157-1164. DOI: 10.1007/Bf02665314  0.329
1986 Grivas D, Frear D, Quan L, Morris JW. The formation of Cu 3 Sn intermetallic on the reaction of Cu with 95Pb-5Sn solder Journal of Electronic Materials. 15: 355-359. DOI: 10.1007/Bf02661885  0.31
1986 Fultz B, Kim JI, Kim YH, Morris JW. The chemical composition of precipitated austenite in 9Ni steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 17: 967-972. DOI: 10.1007/Bf02661262  0.566
1986 Tomota Y, Strum M, Morris JW. Microstructural dependence of Fe-high Mn tensile behavior Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 17: 537-547. DOI: 10.1007/Bf02643961  0.385
1986 Frear D, Morris JW. A study of the effect of precipitated austenite on the fracture of a ferritic cryogenic steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 17: 243-252. DOI: 10.1007/Bf02643900  0.324
1986 Glazer J, Verzasconi SL, Dalder ENC, Yu W, Emigh RA, Ritchie RO, Morris JW. Cryogenic mechanical properties of Al-Cu-Li-Zr alloy 2090 Advances in Cryogenic Engineering. 32: 397-404. DOI: 10.1007/978-1-4613-9871-4_48  0.359
1986 Fultz B, Fior GO, Chang GM, Kopa R, Morris JW. Magneto-mechanical effects in two steels with metastable austenite Advances in Cryogenic Engineering. 32: 377-384. DOI: 10.1007/978-1-4613-9871-4_45  0.559
1986 Summers LT, Morris JW. Improvements in the Weldability of a Superconductor Sheath Material Advances in Cryogenic Engineering. 32: 103-109. DOI: 10.1007/978-1-4613-9871-4_12  0.346
1986 Chan JW, Morris JW. Cryogenic Mechanical Properties of High-Manganese Steel Weldments Advances in Cryogenic Engineering. 32: 97-102. DOI: 10.1007/978-1-4613-9871-4_11  0.354
1985 Dietderich DR, Glazer J, Lea C, Hassenzahl WV, Morris JW. The critical current density and microstructural state of an internal tin multifilamentary superconducting wire Ieee Transactions On Magnetics. 21: 297-300. DOI: 10.1109/Tmag.1985.1063676  0.305
1985 Johnson-Walls P, Dieterich D, Hassenzahl W, Morris J. The microstructural state of Nb 3 Sn in a multifilamentary titanium doped bronze-process wire Ieee Transactions On Magnetics. 21: 1137-1139. DOI: 10.1109/Tmag.1985.1063635  0.365
1985 Fultz B, Morris JW. A Mössbauer spectrometry study of the mechanical transformation of precipitated austenite in 6Ni steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 16: 173-177. DOI: 10.1007/Bf02816043  0.557
1985 Fultz B, Morris JW. The mechanical stability of precipitated austenite in 9Ni steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 16: 2251-2256. DOI: 10.1007/Bf02670424  0.569
1985 Fultz B, Kim JI, Kim YH, Kim HJ, Fior GO, Morris JW. The stability of precipitated austenite and the toughness of 9Ni steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 16: 2237-2249. DOI: 10.1007/Bf02670423  0.579
1984 Fultz B, DuBois A, Kim HJ, Morris JW. Cryogenic mechanical properties of superalloy MP35N Cryogenics. 24: 687-690. DOI: 10.1016/0011-2275(84)90040-7  0.54
1984 Kim JI, Kim HJ, Morris JW. The role of the constituent phases in determining the low temperature toughness of 5.5Ni cryogenic steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 15: 2213-2219. DOI: 10.1007/Bf02647104  0.38
1983 Morris JW. The use of Phase Transformations in the Design of Alloy Steel Mrs Proceedings. 21: 713. DOI: 10.1557/Proc-21-713  0.305
1983 Wu IW, Dietderich DR, Holthuis JT, Hong M, Hassenzahl WV, Morris JW. The microstructure and critical current characteristic of a bronze‐processed multifilamentary Nb3Sn superconducting wire Journal of Applied Physics. 54: 7139-7152. DOI: 10.1063/1.331985  0.302
1983 Lee HJ, Morris JW. High resolution scanning Auger microscopic investigation of intergranular fracture in as-quenched Fe-12Mn Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 14: 913-920. DOI: 10.1007/Bf02644296  0.311
1983 Kim JI, Syn CK, Morris JW. Microstructural sources of toughness in QLT-Treated 5.5Ni cryogenic steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 14: 93-103. DOI: 10.1007/Bf02643742  0.305
1981 Green MA, Pierre PD, Derby K, DeOlivares JM, Eberhard PH, Fultz BT, Giauque RD, GibSon GH, Goulding FS, Kim JI, Martin PS, Morris JW, Pripstein M, Ross QR, Shapiro MD, et al. Ground plane insulation failure in the first tpc superconducting coil Ieee Transactions On Magnetics. 17: 1855-1859. DOI: 10.1109/Tmag.1981.1061311  0.506
1981 Hong M, Deitderich D, Wu I, Morris J. Microstructure and properties of A15 superconductors formed by direct precipitation Ieee Transactions On Magnetics. 17: 278-281. DOI: 10.1109/Tmag.1981.1060907  0.311
1981 Wen SH, Kostlan E, Hong M, Khachaturyan AG, Morris JW. The preferred habit of a tetragonal inclusion in a cubix matrix Acta Metallurgica. 29: 1247-1254. DOI: 10.1016/0001-6160(81)90015-8  0.314
1981 Wen SH, Khatchaturyan AG, Morris JW. Computer Simulation of a “Tweed- Transformation” in an Idealized Elastic Crystal Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 12: 581-587. DOI: 10.1007/Bf02649732  0.311
1981 Kim JI, Morris JW. The composition of precipitated austenite in 5.5ni steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 12: 1957-1963. DOI: 10.1007/Bf02643809  0.324
1980 Hong M, Dietderich D, Morris JW. Development of A‐15 (V3Ga) superconducting material through controlled precipitation Journal of Applied Physics. 51: 2774-2779. DOI: 10.1063/1.327940  0.312
1980 Mahin KW, Hanson K, Morris J. Comparative analysis of the cellular and Johnson-Mehl microstructures through computer simulation Acta Metallurgica. 28: 443-453. DOI: 10.1016/0001-6160(80)90134-0  0.317
1980 Hwang SK, Morris JW. The use of a boron addition to prevent intergranular embrittlement in Fe-12Mn Metallurgical Transactions A. 11: 1197-1206. DOI: 10.1007/Bf02668143  0.373
1980 Niikura M, Morris JW. Thermal processing of ferritic 5Mn steel for toughness at cryogenic temperatures Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 11: 1531-1540. DOI: 10.1007/Bf02654516  0.341
1980 Kim JI, Morris JW. On The Scavenging Effect Of Precipitated Austenite In A Low Carbon Fe-5, 5Ni Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 11: 1401-1406. DOI: 10.1007/Bf02653495  0.362
1979 Grivas D, Murty KL, Morris JW. Deformation of PbSn eutectic alloys at relatively high strain rates Acta Metallurgica. 27: 731-737. DOI: 10.1016/0001-6160(79)90106-8  0.355
1979 Hwang SK, Morris JW. The improvement of cryogenic mechanical properties of Fe-12 Mn and Fe-8 Mn alloy steels through thermal/mechanical treatments Metallurgical Transactions A. 10: 545-555. DOI: 10.1007/Bf02658317  0.346
1978 Fultz B, Morris JW. Multichannel scaling with an eight bit microcomputer. The Review of Scientific Instruments. 49: 1216. PMID 18699287 DOI: 10.1063/1.1135554  0.481
1978 Syn CK, Fultz B, Morris JW. MECHANICAL STABILITY OF RETAINED AUSTENITE IN TEMPERED 9Ni STEEL Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 9: 1635-1640. DOI: 10.1007/Bf02661946  0.561
1978 Jin S, Morris JW, Chen YL, Thomas G, Jaffee RI. An investigation of transformation strengthening in precipitation-hardened Fe-Ni austenite Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 9: 1625-1633. DOI: 10.1007/Bf02661945  0.354
1977 Chang KM, Morris JW. Precipitation-Strengthened Austenitic Fe-Mn-Ti Alloys Lawrence Berkeley National Laboratory. DOI: 10.1007/Bf02811994  0.402
1976 Jin S, Huang D, Morris JW. Structure and properties of a microduplex maraging steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 7: 637-645. DOI: 10.1007/Bf03186794  0.358
1976 Syn CK, Jin S, Morris JW. Cryogenic fracture toughness of 9Ni steel enhanced through grain refinement Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 7: 1827-1832. DOI: 10.1007/Bf02654977  0.385
1975 Hanson K, Morris JW. Limiting configuration in dislocation glide through a random array of point obstacles Journal of Applied Physics. 46: 983-990. DOI: 10.1063/1.321718  0.301
1975 Hwang SK, Jin S, Morris JW. A study of retained austenite in a fine-grained Fe-12Ni-0.25Ti alloy Metallurgical Transactions A. 6: 2015-2021. DOI: 10.1007/Bf03161826  0.401
1975 Jin S, Hwang SK, Morris JW. The effect of grain size and retained austenite on the ductile-brittle transition of a titanium-gettered iron alloy Metallurgical Transactions A. 6: 1721-1726. DOI: 10.1007/Bf02642299  0.355
1975 Jin S, Hwang SK, Morris JW. Comparative fracture toughness of an ultrafine grained Fe-Ni alloy at liquid helium temperature Metallurgical Transactions A. 6: 1569-1575. DOI: 10.1007/Bf02641969  0.347
Show low-probability matches.