| Year |
Citation |
Score |
| 2020 |
Zhou L, Garg D, Qiu Y, Kim S, Mudawar I, Kharangate CR. Machine learning algorithms to predict flow condensation heat transfer coefficient in mini/micro-channel utilizing universal data International Journal of Heat and Mass Transfer. 162: 120351. DOI: 10.1016/J.Ijheatmasstransfer.2020.120351 |
0.634 |
|
| 2020 |
Lee J, O'Neill LE, Mudawar I. Computational prediction of key heat transfer mechanisms and hydrodynamic characteristics of critical heat flux (CHF) in subcooled vertical upflow boiling International Journal of Heat and Mass Transfer. 161: 120262. DOI: 10.1016/J.Ijheatmasstransfer.2020.120262 |
0.674 |
|
| 2020 |
Cai C, Mudawar I, Liu H. Mechanistic method to predicting minimum heat flux point wall temperature in saturated pool boiling International Journal of Heat and Mass Transfer. 156: 119854. DOI: 10.1016/J.Ijheatmasstransfer.2020.119854 |
0.608 |
|
| 2020 |
O'Neill LE, Mudawar I. Review of two-phase flow instabilities in macro- and micro-channel systems International Journal of Heat and Mass Transfer. 157: 119738. DOI: 10.1016/J.Ijheatmasstransfer.2020.119738 |
0.504 |
|
| 2020 |
Lee J, O'Neill LE, Mudawar I. 3-D computational investigation and experimental validation of effect of shear-lift on two-phase flow and heat transfer characteristics of highly subcooled flow boiling in vertical upflow International Journal of Heat and Mass Transfer. 150: 119291. DOI: 10.1016/J.Ijheatmasstransfer.2019.119291 |
0.622 |
|
| 2020 |
Qiu Y, Garg D, Zhou L, Kharangate CR, Kim S, Mudawar I. An artificial neural network model to predict mini/micro-channels saturated flow boiling heat transfer coefficient based on universal consolidated data International Journal of Heat and Mass Transfer. 149: 119211. DOI: 10.1016/J.Ijheatmasstransfer.2019.119211 |
0.63 |
|
| 2020 |
Lei Y, Mudawar I, Chen Z. Computational and experimental investigation of condensation flow patterns and heat transfer in parallel rectangular micro-channels International Journal of Heat and Mass Transfer. 149: 119158. DOI: 10.1016/J.Ijheatmasstransfer.2019.119158 |
0.585 |
|
| 2020 |
Liang G, Mudawar I. Review of channel flow boiling enhancement by surface modification, and instability suppression schemes International Journal of Heat and Mass Transfer. 146: 118864. DOI: 10.1016/J.Ijheatmasstransfer.2019.118864 |
0.66 |
|
| 2020 |
Cai C, Mudawar I, Liu H, Si C. Theoretical Leidenfrost point (LFP) model for sessile droplet International Journal of Heat and Mass Transfer. 146: 118802. DOI: 10.1016/J.Ijheatmasstransfer.2019.118802 |
0.389 |
|
| 2020 |
Liang G, Mudawar I. Review of Nanoscale Boiling Enhancement Techniques and Proposed Systematic Testing Strategy to Ensure Cooling Reliability and Repeatability Applied Thermal Engineering. 115982. DOI: 10.1016/J.Applthermaleng.2020.115982 |
0.551 |
|
| 2019 |
O'Neill LE, Balasubramaniam R, Nahra HK, Hasan MM, Mudawar I. Flow condensation heat transfer in a smooth tube at different orientations: Experimental results and predictive models International Journal of Heat and Mass Transfer. 140: 533-563. DOI: 10.1016/J.Ijheatmasstransfer.2019.05.103 |
0.651 |
|
| 2019 |
Lee S, Devahdhanush V, Mudawar I. Experimental and analytical investigation of flow loop induced instabilities in micro-channel heat sinks International Journal of Heat and Mass Transfer. 140: 303-330. DOI: 10.1016/J.Ijheatmasstransfer.2019.05.077 |
0.578 |
|
| 2019 |
Lee J, O'Neill LE, Lee S, Mudawar I. Experimental and computational investigation on two-phase flow and heat transfer of highly subcooled flow boiling in vertical upflow International Journal of Heat and Mass Transfer. 136: 1199-1216. DOI: 10.1016/J.Ijheatmasstransfer.2019.03.046 |
0.675 |
|
| 2019 |
Liang G, Mudawar I. Review of single-phase and two-phase nanofluid heat transfer in macro-channels and micro-channels International Journal of Heat and Mass Transfer. 136: 324-354. DOI: 10.1016/J.Ijheatmasstransfer.2019.02.086 |
0.616 |
|
| 2019 |
O'Neill LE, Balasubramaniam R, Nahra HK, Hasan MM, Mackey JR, Mudawar I. Identification of condensation flow regime at different orientations using temperature and pressure measurements International Journal of Heat and Mass Transfer. 135: 569-590. DOI: 10.1016/J.Ijheatmasstransfer.2019.01.133 |
0.461 |
|
| 2019 |
Lee S, Mudawar I. Enhanced model for annular flow in micro-channel heat sinks, including effects of droplet entrainment/deposition and core turbulence International Journal of Heat and Mass Transfer. 133: 510-530. DOI: 10.1016/J.Ijheatmasstransfer.2018.12.074 |
0.646 |
|
| 2019 |
Hu Y, Wang J, Yang J, Mudawar I, Wang Q. Experimental study of forced convective heat transfer in grille-particle composite packed beds International Journal of Heat and Mass Transfer. 129: 103-112. DOI: 10.1016/J.Ijheatmasstransfer.2018.09.103 |
0.535 |
|
| 2019 |
Liang G, Mudawar I. Review of pool boiling enhancement by surface modification International Journal of Heat and Mass Transfer. 128: 892-933. DOI: 10.1016/J.Ijheatmasstransfer.2018.09.026 |
0.496 |
|
| 2018 |
O'Neill LE, Mudawar I, Hasan MM, Nahra HK, Balasubramaniam R, Mackey JR. Experimental investigation of frequency and amplitude of density wave oscillations in vertical upflow boiling. International Journal of Heat and Mass Transfer. 125: 1240-1263. PMID 30713351 DOI: 10.1016/J.Ijheatmasstransfer.2018.04.138 |
0.439 |
|
| 2018 |
O'Neill LE, Mudawar I. Mechanistic model to predict frequency and amplitude of Density Wave Oscillations in vertical upflow boiling. International Journal of Heat and Mass Transfer. 123: 143-171. PMID 30713350 DOI: 10.1016/J.Ijheatmasstransfer.2018.02.078 |
0.542 |
|
| 2018 |
O'Neill LE, Mudawar I, Hasan MM, Nahra HK, Balasubramaniam R, Mackey JR. Flow condensation pressure oscillations at different orientations. International Journal of Heat and Mass Transfer. 127: 784-809. PMID 30705463 DOI: 10.1016/J.Ijheatmasstransfer.2018.07.072 |
0.444 |
|
| 2018 |
O'Neill LE, Mudawar I, Hasan MM, Nahra HK, Balasubramaniam R, Hall NR, Lokey A, Mackey JR. Experimental investigation into the impact of density wave oscillations on flow boiling system dynamic behavior and stability. International Journal of Heat and Mass Transfer. 120: 144-166. PMID 30705462 DOI: 10.1016/J.Ijheatmasstransfer.2017.12.011 |
0.545 |
|
| 2018 |
Liang G, Mudawar I. Review of pool boiling enhancement with additives and nanofluids International Journal of Heat and Mass Transfer. 124: 423-453. DOI: 10.1016/J.Ijheatmasstransfer.2018.03.046 |
0.57 |
|
| 2018 |
Lee S, Devahdhanush V, Mudawar I. Investigation of subcooled and saturated boiling heat transfer mechanisms, instabilities, and transient flow regime maps for large length-to-diameter ratio micro-channel heat sinks International Journal of Heat and Mass Transfer. 123: 172-191. DOI: 10.1016/J.Ijheatmasstransfer.2018.02.020 |
0.647 |
|
| 2018 |
Liang G, Mudawar I. Pool boiling critical heat flux (CHF) – Part 1: Review of mechanisms, models, and correlations International Journal of Heat and Mass Transfer. 117: 1352-1367. DOI: 10.1016/J.Ijheatmasstransfer.2017.09.134 |
0.509 |
|
| 2018 |
Liang G, Mudawar I. Pool boiling critical heat flux (CHF) – Part 2: Assessment of models and correlations International Journal of Heat and Mass Transfer. 117: 1368-1383. DOI: 10.1016/J.Ijheatmasstransfer.2017.09.073 |
0.465 |
|
| 2018 |
Lee S, Devahdhanush V, Mudawar I. Frequency analysis of pressure oscillations in large length-to-diameter two-phase micro-channel heat sinks International Journal of Heat and Mass Transfer. 116: 273-291. DOI: 10.1016/J.Ijheatmasstransfer.2017.08.107 |
0.573 |
|
| 2017 |
O'Neill LE, Park I, Kharangate CR, Devahdhanush VS, Ganesan V, Mudawar I. Assessment of body force effects in flow condensation, part II: Criteria for negating influence of gravity. International Journal of Heat and Mass Transfer. 106: 313-328. PMID 30524142 DOI: 10.1016/J.Ijheatmasstransfer.2016.07.019 |
0.858 |
|
| 2017 |
Park I, O'Neill LE, Kharangate CR, Mudawar I. Assessment of body force effects in flow condensation, Part I: Experimental investigation of liquid film behavior for different orientations. International Journal of Heat and Mass Transfer. 106: 295-312. PMID 30524141 DOI: 10.1016/J.Ijheatmasstransfer.2016.05.065 |
0.851 |
|
| 2017 |
Lee S, Devahdhanush V, Mudawar I. Pressure drop characteristics of large length-to-diameter two-phase micro-channel heat sinks International Journal of Heat and Mass Transfer. 115: 1258-1275. DOI: 10.1016/J.Ijheatmasstransfer.2017.08.104 |
0.596 |
|
| 2017 |
Liang G, Mudawar I. Review of spray cooling – Part 1: Single-phase and nucleate boiling regimes, and critical heat flux International Journal of Heat and Mass Transfer. 115: 1174-1205. DOI: 10.1016/J.Ijheatmasstransfer.2017.06.029 |
0.603 |
|
| 2017 |
Liang G, Mudawar I. Review of spray cooling – Part 2: High temperature boiling regimes and quenching applications International Journal of Heat and Mass Transfer. 115: 1206-1222. DOI: 10.1016/J.Ijheatmasstransfer.2017.06.022 |
0.533 |
|
| 2017 |
Liang G, Mascarenhas N, Mudawar I. Analytical and experimental determination of slug flow parameters, pressure drop and heat transfer coefficient in micro-channel condensation International Journal of Heat and Mass Transfer. 111: 1218-1233. DOI: 10.1016/J.Ijheatmasstransfer.2017.04.045 |
0.867 |
|
| 2017 |
Kharangate CR, Mudawar I. Review of computational studies on boiling and condensation International Journal of Heat and Mass Transfer. 108: 1164-1196. DOI: 10.1016/J.Ijheatmasstransfer.2016.12.065 |
0.436 |
|
| 2017 |
Liang G, Mudawar I. Review of drop impact on heated walls International Journal of Heat and Mass Transfer. 106: 103-126. DOI: 10.1016/J.Ijheatmasstransfer.2016.10.031 |
0.595 |
|
| 2017 |
Kim S, Mudawar I. Thermal design and operational limits of two-phase micro-channel heat sinks International Journal of Heat and Mass Transfer. 106: 861-876. DOI: 10.1016/J.Ijheatmasstransfer.2016.10.020 |
0.672 |
|
| 2016 |
Kharangate CR, O'Neill LE, Mudawar I. Effects of two-phase inlet quality, mass velocity, flow orientation, and heating perimeter on flow boiling in a rectangular channel: Part 2 - CHF experimental results and model. International Journal of Heat and Mass Transfer. 103: 1280-1296. PMID 30524140 DOI: 10.1016/J.Ijheatmasstransfer.2016.05.059 |
0.88 |
|
| 2016 |
Kharangate CR, O'Neill LE, Mudawar I. Effects of two-phase inlet quality, mass velocity, flow orientation, and heating perimeter on flow boiling in a rectangular channel: Part 1 - Two-phase flow and heat transfer results. International Journal of Heat and Mass Transfer. 103: 1261-1279. PMID 30524139 |
0.883 |
|
| 2016 |
O'Neill LE, Kharangate CR, Mudawar I. Time-averaged and transient pressure drop for flow boiling with saturated inlet conditions. International Journal of Heat and Mass Transfer. 103: 133-153. PMID 30524138 DOI: 10.1016/J.Ijheatmasstransfer.2016.07.031 |
0.839 |
|
| 2016 |
Lee S, Mudawar I. Thermal and thermodynamic performance, and pressure oscillations of refrigeration loop employing large micro-channel evaporators International Journal of Heat and Mass Transfer. 103: 1313-1326. DOI: 10.1016/J.Ijheatmasstransfer.2016.08.031 |
0.612 |
|
| 2016 |
Lee S, Mudawar I. Transient characteristics of flow boiling in large micro-channel heat exchangers International Journal of Heat and Mass Transfer. 103: 186-202. DOI: 10.1016/J.Ijheatmasstransfer.2016.07.040 |
0.65 |
|
| 2016 |
Park I, O'Neill LE, Kharangate CR, Mudawar I. Assessment of body force effects in flow condensation, Part I: Experimental investigation of liquid film behavior for different orientations International Journal of Heat and Mass Transfer. DOI: 10.1016/j.ijheatmasstransfer.2016.05.065 |
0.488 |
|
| 2016 |
Liang G, Mudawar I. Review of mass and momentum interactions during drop impact on a liquid film International Journal of Heat and Mass Transfer. 101: 577-599. DOI: 10.1016/J.Ijheatmasstransfer.2016.05.062 |
0.369 |
|
| 2016 |
Kharangate CR, O'Neill LE, Mudawar I. Effects of two-phase inlet quality, mass velocity, flow orientation, and heating perimeter on flow boiling in a rectangular channel: Part 1 – Two-phase flow and heat transfer results International Journal of Heat and Mass Transfer. 103: 1261-1279. DOI: 10.1016/J.Ijheatmasstransfer.2016.05.060 |
0.677 |
|
| 2016 |
Kharangate CR, O'Neill LE, Mudawar I. Effects of two-phase inlet quality, mass velocity, flow orientation, and heating perimeter on flow boiling in a rectangular channel: Part 2 – CHF experimental results and model International Journal of Heat and Mass Transfer. 103: 1280-1296. DOI: 10.1016/j.ijheatmasstransfer.2016.05.059 |
0.603 |
|
| 2016 |
Lee SH, Mudawar I. Investigation of flow boiling in large micro-channel heat exchangers in a refrigeration loop for space applications International Journal of Heat and Mass Transfer. 97: 110-129. DOI: 10.1016/J.Ijheatmasstransfer.2016.01.072 |
0.665 |
|
| 2016 |
Kharangate CR, Lee H, Park I, Mudawar I. Experimental and computational investigation of vertical upflow condensation in a circular tube International Journal of Heat and Mass Transfer. 95: 249-263. DOI: 10.1016/J.Ijheatmasstransfer.2015.11.010 |
0.649 |
|
| 2016 |
Kharangate CR, Konishi C, Mudawar I. Consolidated methodology to predicting flow boiling critical heat flux for inclined channels in Earth gravity and for microgravity International Journal of Heat and Mass Transfer. 92: 467-482. DOI: 10.1016/J.Ijheatmasstransfer.2015.08.018 |
0.876 |
|
| 2016 |
Lee SH, Mudawar I, Hasan MM. Thermal analysis of hybrid single-phase, two-phase and heat pump thermal control system (TCS) for future spacecraft Applied Thermal Engineering. 100: 190-214. DOI: 10.1016/J.Applthermaleng.2016.01.018 |
0.574 |
|
| 2015 |
Kharangate CR, O'Neill LE, Mudawar I, Hasan MM, Nahra HK, Balasubramaniam R, Hall NR, Macner AM, Mackey JR. Effects of subcooling and two-phase inlet on flow boiling heat transfer and critical heat flux in a horizontal channel with one-sided and double-sided heating International Journal of Heat and Mass Transfer. 91: 1187-1205. DOI: 10.1016/J.Ijheatmasstransfer.2015.08.059 |
0.663 |
|
| 2015 |
Kharangate CR, O'Neill LE, Mudawar I, Hasan MM, Nahra HK, Balasubramaniam R, Hall NR, Macner AM, Mackey JR. Flow boiling and critical heat flux in horizontal channel with one-sided and double-sided heating International Journal of Heat and Mass Transfer. 90: 323-338. DOI: 10.1016/J.Ijheatmasstransfer.2015.06.073 |
0.607 |
|
| 2015 |
Kim SM, Mudawar I. Review of two-phase critical flow models and investigation of the relationship between choking, premature CHF, and CHF in micro-channel heat sinks International Journal of Heat and Mass Transfer. 87: 497-511. DOI: 10.1016/J.Ijheatmasstransfer.2015.04.012 |
0.618 |
|
| 2015 |
Lee H, Kharangate CR, Mascarenhas N, Park I, Mudawar I. Experimental and computational investigation of vertical downflow condensation International Journal of Heat and Mass Transfer. 85: 865-879. DOI: 10.1016/J.Ijheatmasstransfer.2015.02.037 |
0.857 |
|
| 2015 |
Mascarenhas N, Lee H, Mudawar I. Experimental and computational investigation of interfacial shear along a wavy two-phase interface International Journal of Heat and Mass Transfer. 85: 265-280. DOI: 10.1016/J.Ijheatmasstransfer.2015.01.096 |
0.817 |
|
| 2015 |
Konishi C, Lee H, Mudawar I, Hasan MM, Nahra HK, Hall NR, Wagner JD, May RL, Mackey JR. Flow boiling in microgravity: Part 2 - Critical heat flux interfacial behavior, experimental data, and model International Journal of Heat and Mass Transfer. 81: 721-736. DOI: 10.1016/J.Ijheatmasstransfer.2014.10.052 |
0.885 |
|
| 2015 |
Konishi C, Lee H, Mudawar I, Hasan MM, Nahra HK, Hall NR, Wagner JD, May RL, Mackey JR. Flow boiling in microgravity: Part 1 - Interfacial behavior and experimental heat transfer results International Journal of Heat and Mass Transfer. 81: 705-720. DOI: 10.1016/J.Ijheatmasstransfer.2014.10.049 |
0.88 |
|
| 2015 |
Kharangate CR, Lee H, Mudawar I. Computational modeling of turbulent evaporating falling films International Journal of Heat and Mass Transfer. 81: 52-62. DOI: 10.1016/J.Ijheatmasstransfer.2014.09.068 |
0.634 |
|
| 2015 |
Park I, Lee H, Mudawar I. Determination of flow regimes and heat transfer coefficient for condensation in horizontal tubes International Journal of Heat and Mass Transfer. 80: 698-716. DOI: 10.1016/J.Ijheatmasstransfer.2014.09.035 |
0.725 |
|
| 2015 |
Konishi C, Mudawar I. Review of flow boiling and critical heat flux in microgravity International Journal of Heat and Mass Transfer. 80: 469-493. DOI: 10.1016/J.Ijheatmasstransfer.2014.09.017 |
0.855 |
|
| 2014 |
Lee H, Park I, Konishi C, Mudawar I, May RI, Juergens JR, Wagner JD, Hall NR, Nahra HK, Hasan MM, Mackey JR. Experimental investigation of flow condensation in microgravity Journal of Heat Transfer. 136. DOI: 10.1115/1.4025683 |
0.884 |
|
| 2014 |
Lee H, Park I, Mudawar I, Hasan MM. Micro-channel evaporator for space applications - 1. Experimental pressure drop and heat transfer results for different orientations in earth gravity International Journal of Heat and Mass Transfer. 77: 1213-1230. DOI: 10.1016/J.Ijheatmasstransfer.2014.06.012 |
0.719 |
|
| 2014 |
Lee H, Park I, Mudawar I, Hasan MM. Micro-channel evaporator for space applications - 2. Assessment of predictive tools International Journal of Heat and Mass Transfer. 77: 1231-1249. DOI: 10.1016/J.Ijheatmasstransfer.2014.06.008 |
0.687 |
|
| 2014 |
Kim SM, Mudawar I. Review of databases and predictive methods for heat transfer in condensing and boiling mini/micro-channel flows International Journal of Heat and Mass Transfer. 77: 627-652. DOI: 10.1016/J.Ijheatmasstransfer.2014.05.036 |
0.627 |
|
| 2014 |
Kim SM, Mudawar I. Review of databases and predictive methods for pressure drop in adiabatic, condensing and boiling mini/micro-channel flows International Journal of Heat and Mass Transfer. 77: 74-97. DOI: 10.1016/J.Ijheatmasstransfer.2014.04.035 |
0.557 |
|
| 2014 |
Kim SM, Mudawar I. Theoretical model for local heat transfer coefficient for annular flow boiling in circular mini/micro-channels International Journal of Heat and Mass Transfer. 73: 731-742. DOI: 10.1016/J.Ijheatmasstransfer.2014.02.055 |
0.615 |
|
| 2014 |
Mascarenhas N, Mudawar I. Statistical analysis of measured and computed thickness and interfacial temperature of free-falling turbulent liquid films International Journal of Heat and Mass Transfer. 73: 716-730. DOI: 10.1016/J.Ijheatmasstransfer.2014.02.054 |
0.796 |
|
| 2013 |
Mudawar I. Recent advances in high-flux, two-phase thermal management Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 2. DOI: 10.1115/1.4023599 |
0.604 |
|
| 2013 |
Mascarenhas N, Mudawar I. Study of the influence of interfacial waves on heat transfer in turbulent falling films International Journal of Heat and Mass Transfer. 67: 1106-1121. DOI: 10.1016/J.Ijheatmasstransfer.2013.08.100 |
0.824 |
|
| 2013 |
Konishi C, Mudawar I, Hasan MM. Investigation of localized dryout versus CHF in saturated flow boiling International Journal of Heat and Mass Transfer. 67: 131-146. DOI: 10.1016/J.Ijheatmasstransfer.2013.07.082 |
0.881 |
|
| 2013 |
Lee H, Mudawar I, Hasan MM. Flow condensation in horizontal tubes International Journal of Heat and Mass Transfer. 66: 31-45. DOI: 10.1016/J.Ijheatmasstransfer.2013.06.044 |
0.708 |
|
| 2013 |
Konishi C, Mudawar I, Hasan MM. Criteria for negating the influence of gravity on flow boiling critical heat flux with two-phase inlet conditions International Journal of Heat and Mass Transfer. 65: 203-218. DOI: 10.1016/J.Ijheatmasstransfer.2013.05.070 |
0.867 |
|
| 2013 |
Park I, Mudawar I. Climbing film, flooding and falling film behavior in upflow condensation in tubes International Journal of Heat and Mass Transfer. 65: 44-61. DOI: 10.1016/J.Ijheatmasstransfer.2013.05.065 |
0.496 |
|
| 2013 |
Mascarenhas N, Mudawar I. Investigation of eddy diffusivity and heat transfer coefficient for free-falling turbulent liquid films subjected to sensible heating International Journal of Heat and Mass Transfer. 64: 647-660. DOI: 10.1016/J.Ijheatmasstransfer.2013.04.061 |
0.863 |
|
| 2013 |
Kim SM, Mudawar I. Universal approach to predicting saturated flow boiling heat transfer in mini/micro-channels - Part I. Dryout incipience quality International Journal of Heat and Mass Transfer. DOI: 10.1016/J.Ijheatmasstransfer.2013.04.016 |
0.624 |
|
| 2013 |
Kim SM, Mudawar I. Universal approach to predicting saturated flow boiling heat transfer in mini/micro-channels - Part II. Two-phase heat transfer coefficient International Journal of Heat and Mass Transfer. DOI: 10.1016/J.Ijheatmasstransfer.2013.04.014 |
0.626 |
|
| 2013 |
Konishi C, Mudawar I, Hasan MM. Erratum to “Investigation of the influence of orientation on critical heat flux for flow boiling with two-phase inlet” [Int. J. Heat Mass Transfer 61 (2013) 176–190] International Journal of Heat and Mass Transfer. 61: 759. DOI: 10.1016/J.Ijheatmasstransfer.2013.03.065 |
0.871 |
|
| 2013 |
Lee H, Mudawar I, Hasan MM. Experimental and theoretical investigation of annular flow condensation in microgravity International Journal of Heat and Mass Transfer. 61: 293-309. DOI: 10.1016/J.Ijheatmasstransfer.2013.02.010 |
0.681 |
|
| 2013 |
Konishi C, Mudawar I, Hasan MM. Investigation of the influence of orientation on critical heat flux for flow boiling with two-phase inlet International Journal of Heat and Mass Transfer. 61: 176-190. DOI: 10.1016/J.Ijheatmasstransfer.2013.01.076 |
0.877 |
|
| 2013 |
Kim SM, Mudawar I. Universal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling International Journal of Heat and Mass Transfer. 58: 718-734. DOI: 10.1016/J.Ijheatmasstransfer.2012.11.045 |
0.543 |
|
| 2013 |
Park I, Kim SM, Mudawar I. Experimental measurement and modeling of downflow condensation in a circular tube International Journal of Heat and Mass Transfer. 57: 567-581. DOI: 10.1016/J.Ijheatmasstransfer.2012.10.060 |
0.614 |
|
| 2013 |
Kim SM, Mudawar I. Universal approach to predicting heat transfer coefficient for condensing mini/micro-channel flow International Journal of Heat and Mass Transfer. 56: 238-250. DOI: 10.1016/J.Ijheatmasstransfer.2012.09.032 |
0.568 |
|
| 2012 |
Northcutt B, Mudawar I. Enhanced design of cross-flow microchannel heat exchanger module for high-performance aircraft gas turbine engines Journal of Heat Transfer. 134. DOI: 10.1115/1.4006037 |
0.541 |
|
| 2012 |
Visaria M, Mudawar I. Experimental investigation and theoretical modeling of dehydriding process in high-pressure metal hydride hydrogen storage systems International Journal of Hydrogen Energy. 37: 5735-5749. DOI: 10.1016/J.Ijhydene.2011.12.140 |
0.85 |
|
| 2012 |
Kharangate CR, Mudawar I, Hasan MM. Photographic study and modeling of critical heat flux in horizontal flow boiling with inlet vapor void International Journal of Heat and Mass Transfer. 55: 4154-4168. DOI: 10.1016/J.Ijheatmasstransfer.2012.03.057 |
0.621 |
|
| 2012 |
Kim SM, Mudawar I. Consolidated method to predicting pressure drop and heat transfer coefficient for both subcooled and saturated flow boiling in micro-channel heat sinks International Journal of Heat and Mass Transfer. 55: 3720-3731. DOI: 10.1016/J.Ijheatmasstransfer.2012.02.061 |
0.638 |
|
| 2012 |
Kim SM, Mudawar I. Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows International Journal of Heat and Mass Transfer. 55: 3246-3261. DOI: 10.1016/J.Ijheatmasstransfer.2012.02.047 |
0.517 |
|
| 2012 |
Mascarenhas N, Mudawar I. Methodology for predicting spray quenching of thick-walled metal alloy tubes International Journal of Heat and Mass Transfer. 55: 2953-2964. DOI: 10.1016/J.Ijheatmasstransfer.2012.02.018 |
0.835 |
|
| 2012 |
Visaria M, Mudawar I. Coiled-tube heat exchanger for high-pressure metal hydride hydrogen storage systems - Part 2. Computational model International Journal of Heat and Mass Transfer. 55: 1796-1806. DOI: 10.1016/J.Ijheatmasstransfer.2011.11.036 |
0.842 |
|
| 2012 |
Visaria M, Mudawar I. Coiled-tube heat exchanger for High-Pressure Metal Hydride hydrogen storage systems - Part 1. Experimental study International Journal of Heat and Mass Transfer. 55: 1782-1795. DOI: 10.1016/J.Ijheatmasstransfer.2011.11.035 |
0.859 |
|
| 2012 |
Kim SM, Mudawar I. Theoretical model for annular flow condensation in rectangular micro-channels International Journal of Heat and Mass Transfer. 55: 958-970. DOI: 10.1016/J.Ijheatmasstransfer.2011.10.014 |
0.649 |
|
| 2012 |
Kim SM, Kim J, Mudawar I. Flow condensation in parallel micro-channels - Part 1: Experimental results and assessment of pressure drop correlations International Journal of Heat and Mass Transfer. 55: 971-983. DOI: 10.1016/J.Ijheatmasstransfer.2011.10.013 |
0.541 |
|
| 2012 |
Kim SM, Mudawar I. Flow condensation in parallel micro-channels - Part 2: Heat transfer results and correlation technique International Journal of Heat and Mass Transfer. 55: 984-994. DOI: 10.1016/J.Ijheatmasstransfer.2011.10.012 |
0.631 |
|
| 2012 |
Kharangate CR, Mudawar I, Hasan MM. Experimental and theoretical study of critical heat flux in vertical upflow with inlet vapor void International Journal of Heat and Mass Transfer. 55: 360-374. DOI: 10.1016/J.Ijheatmasstransfer.2011.09.028 |
0.618 |
|
| 2011 |
Mudawar I. Two-phase microchannel heat sinks: Theory, applications, and limitations Journal of Electronic Packaging, Transactions of the Asme. 133. DOI: 10.1115/1.4005300 |
0.638 |
|
| 2011 |
Nacke R, Northcutt B, Mudawar I. Theory and experimental validation of cross-flow micro-channel heat exchanger module with reference to high Mach aircraft gas turbine engines International Journal of Heat and Mass Transfer. 54: 1224-1235. DOI: 10.1016/J.Ijheatmasstransfer.2010.10.028 |
0.607 |
|
| 2011 |
Visaria M, Mudawar I, Pourpoint T. Enhanced heat exchanger design for hydrogen storage using high-pressure metal hydride: Part 1. Design methodology and computational results International Journal of Heat and Mass Transfer. 54: 413-423. DOI: 10.1016/J.Ijheatmasstransfer.2010.09.029 |
0.853 |
|
| 2011 |
Visaria M, Mudawar I, Pourpoint T. Enhanced heat exchanger design for hydrogen storage using high-pressure metal hydride - Part 2. Experimental results International Journal of Heat and Mass Transfer. 54: 424-432. DOI: 10.1016/J.Ijheatmasstransfer.2010.09.028 |
0.854 |
|
| 2011 |
Mudawar I. Two-phase micro-channel heat sinks: Theory, applications and limitations Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.535 |
|
| 2010 |
Mascarenhas N, Mudawar I. Analytical and computational methodology for modeling spray quenching of solid alloy cylinders International Journal of Heat and Mass Transfer. 53: 5871-5883. DOI: 10.1016/J.Ijheatmasstransfer.2010.06.055 |
0.839 |
|
| 2010 |
Kim SM, Mudawar I. Analytical heat diffusion models for heat sinks with circular micro-channels International Journal of Heat and Mass Transfer. 53: 4552-4566. DOI: 10.1016/J.Ijheatmasstransfer.2010.06.038 |
0.571 |
|
| 2010 |
Kim SM, Mudawar I. Analytical heat diffusion models for different micro-channel heat sink cross-sectional geometries International Journal of Heat and Mass Transfer. 53: 4002-4016. DOI: 10.1016/J.Ijheatmasstransfer.2010.05.019 |
0.571 |
|
| 2010 |
Pourpoint TL, Velagapudi V, Mudawar I, Zheng Y, Fisher TS. Active cooling of a metal hydride system for hydrogen storage International Journal of Heat and Mass Transfer. 53: 1326-1332. DOI: 10.1016/J.Ijheatmasstransfer.2009.12.028 |
0.385 |
|
| 2010 |
Visaria M, Mudawar I, Pourpoint T, Kumar S. Study of heat transfer and kinetics parameters influencing the design of heat exchangers for hydrogen storage in high-pressure metal hydrides International Journal of Heat and Mass Transfer. 53: 2229-2239. DOI: 10.1016/J.Ijheatmasstransfer.2009.12.010 |
0.837 |
|
| 2009 |
Smith KC, Zheng Y, Fisher TS, Pourpoint TL, Mudawar I. Heat transfer in high-pressure metal hydride systems Journal of Enhanced Heat Transfer. 16: 189-203. DOI: 10.1615/Jenhheattransf.V16.I2.70 |
0.484 |
|
| 2009 |
Lee J, Mudawar I. Experimental investigation and theoretical model for subcooled flow boiling pressure drop in microchannel heat sinks Journal of Electronic Packaging, Transactions of the Asme. 131: 0310081-03100811. DOI: 10.1115/1.3144146 |
0.588 |
|
| 2009 |
Sung MK, Mudawar I. Single-Phase and two-phase hybrid cooling schemes for high-heat-flux thermal management of defense electronics Journal of Electronic Packaging, Transactions of the Asme. 131: 0210131-02101310. DOI: 10.1115/1.3111253 |
0.856 |
|
| 2009 |
Khanikar V, Mudawar I, Fisher TS. Flow boiling in a micro-channel coated with carbon nanotubes Ieee Transactions On Components and Packaging Technologies. 32: 639-649. DOI: 10.1109/Tcapt.2009.2015232 |
0.492 |
|
| 2009 |
Visaria M, Mudawar I. Application of two-phase spray cooling for thermal management of electronic devices Ieee Transactions On Components and Packaging Technologies. 32: 784-793. DOI: 10.1109/Tcapt.2008.2010405 |
0.849 |
|
| 2009 |
Mudawar I, Bharathan D, Kelly K, Narumanchi S. Two-phase spray cooling of hybrid vehicle electronics Ieee Transactions On Components and Packaging Technologies. 32: 501-512. DOI: 10.1109/Tcapt.2008.2006907 |
0.386 |
|
| 2009 |
Lee J, Mudawar I. Low-temperature two-phase microchannel cooling for high-heat-flux thermal management of defense electronics Ieee Transactions On Components and Packaging Technologies. 32: 453-465. DOI: 10.1109/Tcapt.2008.2005783 |
0.776 |
|
| 2009 |
Zhang H, Mudawar I, Hasan MM. Application of flow boiling for thermal management of electronics in microgravity and reduced-gravity space systems Ieee Transactions On Components and Packaging Technologies. 32: 466-477. DOI: 10.1109/Tcapt.2008.2004413 |
0.553 |
|
| 2009 |
Khanikar V, Mudawar I, Fisher T. Effects of carbon nanotube coating on flow boiling in a micro-channel International Journal of Heat and Mass Transfer. 52: 3805-3817. DOI: 10.1016/J.Ijheatmasstransfer.2009.02.007 |
0.539 |
|
| 2009 |
Lee J, Mudawar I. Critical heat flux for subcooled flow boiling in micro-channel heat sinks International Journal of Heat and Mass Transfer. 52: 3341-3352. DOI: 10.1016/J.Ijheatmasstransfer.2008.12.019 |
0.796 |
|
| 2009 |
Sung MK, Mudawar I. CHF determination for high-heat flux phase change cooling system incorporating both micro-channel flow and jet impingement International Journal of Heat and Mass Transfer. 52: 610-619. DOI: 10.1016/J.Ijheatmasstransfer.2008.07.035 |
0.886 |
|
| 2009 |
LaClair TJ, Mudawar I. Theoretical model for fast bubble growth in small channels with reference to startup of capillary pumped loops used in spacecraft thermal management systems International Journal of Heat and Mass Transfer. 52: 716-723. DOI: 10.1016/J.Ijheatmasstransfer.2008.07.010 |
0.47 |
|
| 2009 |
Sung MK, Mudawar I. Effects of jet pattern on two-phase performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme International Journal of Heat and Mass Transfer. 52: 3364-3372. DOI: 10.1016/J.Ijheatmasstransfer.2008.06.046 |
0.856 |
|
| 2008 |
Zhang H, Mudawar I, Hasan MM. Application of flow boiling for thermal management of electronics in microgravity and reduced gravity space systems 2008 11th Ieee Intersociety Conference On Thermal and Thermomechanical Phenomena in Electronic Systems, I-Therm. 949-959. DOI: 10.1109/ITHERM.2008.4544370 |
0.465 |
|
| 2008 |
Lee J, Mudawar I. Low-temperature two-phase micro-channel cooling for high-heat-flux thermal management of defense electronics 2008 11th Ieee Intersociety Conference On Thermal and Thermomechanical Phenomena in Electronic Systems, I-Therm. 132-144. DOI: 10.1109/ITHERM.2008.4544263 |
0.591 |
|
| 2008 |
Visaria M, Mudawar I. Effects of high subcooling on two-phase spray cooling and critical heat flux International Journal of Heat and Mass Transfer. 51: 5269-5278. DOI: 10.1016/J.Ijheatmasstransfer.2008.02.045 |
0.856 |
|
| 2008 |
Sung MK, Mudawar I. Single-phase hybrid micro-channel/micro-jet impingement cooling International Journal of Heat and Mass Transfer. 51: 4342-4352. DOI: 10.1016/J.Ijheatmasstransfer.2008.02.023 |
0.879 |
|
| 2008 |
Sung MK, Mudawar I. Effects of jet pattern on single-phase cooling performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme International Journal of Heat and Mass Transfer. 51: 4614-4627. DOI: 10.1016/J.Ijheatmasstransfer.2008.02.021 |
0.865 |
|
| 2008 |
Lee J, Mudawar I. Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks - Part 2. Subcooled boiling pressure drop and heat transfer International Journal of Heat and Mass Transfer. 51: 4327-4341. DOI: 10.1016/J.Ijheatmasstransfer.2008.02.013 |
0.786 |
|
| 2008 |
Lee J, Mudawar I. Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks - Part 1: Experimental methods and flow visualization results International Journal of Heat and Mass Transfer. 51: 4315-4326. DOI: 10.1016/J.Ijheatmasstransfer.2008.02.012 |
0.787 |
|
| 2008 |
Sung MK, Mudawar I. Single-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module International Journal of Heat and Mass Transfer. 51: 3882-3895. DOI: 10.1016/J.Ijheatmasstransfer.2007.12.016 |
0.869 |
|
| 2008 |
Sung MK, Mudawar I. Single-phase and two-phase cooling using hybrid micro-channel/slot-jet module International Journal of Heat and Mass Transfer. 51: 3825-3839. DOI: 10.1016/J.Ijheatmasstransfer.2007.12.015 |
0.875 |
|
| 2008 |
Visaria M, Mudawar I. Theoretical and experimental study of the effects of spray inclination on two-phase spray cooling and critical heat flux International Journal of Heat and Mass Transfer. 51: 2398-2410. DOI: 10.1016/J.Ijheatmasstransfer.2007.08.010 |
0.85 |
|
| 2008 |
Howard AH, Mudawar I. Photographic study of pool boiling CHF from a downward-facing convex surface International Communications in Heat and Mass Transfer. 35: 793-799. DOI: 10.1016/J.Icheatmasstransfer.2008.03.003 |
0.475 |
|
| 2007 |
Visaria M, Mudawar I. A systematic approach to predicting critical heat flux for inclined sprays Journal of Electronic Packaging, Transactions of the Asme. 129: 452-459. DOI: 10.1115/1.2804095 |
0.852 |
|
| 2007 |
Bernardin JD, Mudawar I. Transition boiling heat transfer of droplet streams and sprays Journal of Heat Transfer. 129: 1605-1610. DOI: 10.1115/1.2764090 |
0.565 |
|
| 2007 |
Zhang J, Zheng Y, Gore JP, Mudawar I, Fisher TS. 1 kWe sodium borohydride hydrogen generation system. Part II: Reactor modeling Journal of Power Sources. 170: 150-159. DOI: 10.1016/J.Jpowsour.2007.03.025 |
0.499 |
|
| 2007 |
Zhang H, Mudawar I, Hasan MM. Assessment of dimensionless CHF correlations for subcooled flow boiling in microgravity and Earth gravity International Journal of Heat and Mass Transfer. 50: 4568-4580. DOI: 10.1016/J.Ijheatmasstransfer.2007.03.030 |
0.53 |
|
| 2007 |
Ujereh S, Fisher T, Mudawar I. Effects of carbon nanotube arrays on nucleate pool boiling International Journal of Heat and Mass Transfer. 50: 4023-4038. DOI: 10.1016/J.Ijheatmasstransfer.2007.01.030 |
0.391 |
|
| 2007 |
Zhang H, Mudawar I, Hasan MM. CHF model for subcooled flow boiling in Earth gravity and microgravity International Journal of Heat and Mass Transfer. 50: 4039-4051. DOI: 10.1016/J.Ijheatmasstransfer.2007.01.029 |
0.514 |
|
| 2007 |
Lee J, Mudawar I. Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels International Journal of Heat and Mass Transfer. 50: 452-463. DOI: 10.1016/J.Ijheatmasstransfer.2006.08.001 |
0.745 |
|
| 2007 |
Zhang H, Mudawar I, Hasan MM. Photographic study of high-flux subcooled flow boiling and critical heat flux International Communications in Heat and Mass Transfer. 34: 653-660. DOI: 10.1016/J.Icheatmasstransfer.2007.01.014 |
0.66 |
|
| 2006 |
Zheng Y, Velagapudi V, Pourpoint T, Fisher TS, Mudawar I, Gore JP. Thermal management analysis of on-board high-pressure metal hydride systems American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. DOI: 10.1115/IMECE2006-14080 |
0.303 |
|
| 2006 |
Lee J, Mudawar I. Implementation of microchannel evaporator for high-heat-flux refrigeration cooling applications Journal of Electronic Packaging, Transactions of the Asme. 128: 30-37. DOI: 10.1115/1.2159006 |
0.752 |
|
| 2006 |
Qu W, Mudawar I, Lee SY, Wereley ST. Experimental and computational investigation of flow development and pressure drop in a rectangular micro-channel Journal of Electronic Packaging, Transactions of the Asme. 128: 1-9. DOI: 10.1115/1.2159002 |
0.726 |
|
| 2006 |
Sung MK, Mudawar I. Correlation of critical heat flux in hybrid jet impingement/micro-channel cooling scheme International Journal of Heat and Mass Transfer. 49: 2663-2672. DOI: 10.1016/J.Ijheatmasstransfer.2006.01.008 |
0.861 |
|
| 2006 |
Sung MK, Mudawar I. Experimental and numerical investigation of single-phase heat transfer using a hybrid jet-impingement/micro-channel cooling scheme International Journal of Heat and Mass Transfer. 49: 682-694. DOI: 10.1016/J.Ijheatmasstransfer.2005.08.021 |
0.868 |
|
| 2006 |
Rybicki JR, Mudawar I. Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays International Journal of Heat and Mass Transfer. 49: 5-16. DOI: 10.1016/J.Ijheatmasstransfer.2005.07.040 |
0.57 |
|
| 2006 |
Meyer MT, Mudawar I, Boyack CE, Hale CA. Single-phase and two-phase cooling with an array of rectangular jets International Journal of Heat and Mass Transfer. 49: 17-29. DOI: 10.1016/J.Ijheatmasstransfer.2005.07.039 |
0.619 |
|
| 2006 |
Wen CD, Mudawar I. Mathematical determination of emissivity and surface temperature of aluminum alloys using multispectral radiation thermometry International Communications in Heat and Mass Transfer. 33: 1063-1070. DOI: 10.1016/J.Icheatmasstransfer.2006.05.010 |
0.769 |
|
| 2005 |
Ujereh SO, Mudawar I, Amama PB, Fisher TS, Qu W. Enhanced pool boiling using carbon nanotube arrays on a silicon surface American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 376: 691-696. DOI: 10.1115/IMECE2005-80065 |
0.388 |
|
| 2005 |
Zhang J, Fisher TS, Ramachandran PV, Gore JP, Mudawar I. A review of heat transfer issues in hydrogen storage technologies Journal of Heat Transfer. 127: 1391-1399. DOI: 10.1115/1.2098875 |
0.535 |
|
| 2005 |
Qu W, Mudawar I. A systematic methodology for optimal design of two-phase micro-channel heat sinks Journal of Electronic Packaging, Transactions of the Asme. 127: 381-390. DOI: 10.1115/1.2056571 |
0.72 |
|
| 2005 |
Zhang H, Mudawar I, Hasan MM. Flow boiling CHF in microgravity International Journal of Heat and Mass Transfer. 48: 3107-3118. DOI: 10.1016/J.Ijheatmasstransfer.2005.02.015 |
0.571 |
|
| 2005 |
Lee J, Mudawar I. Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II - Heat transfer characteristics International Journal of Heat and Mass Transfer. 48: 941-955. DOI: 10.1016/J.Ijheatmasstransfer.2004.09.019 |
0.785 |
|
| 2005 |
Lee J, Mudawar I. Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I - Pressure drop characteristics International Journal of Heat and Mass Transfer. 48: 928-940. DOI: 10.1016/j.ijheatmasstransfer.2004.09.018 |
0.549 |
|
| 2004 |
Zhang J, Hugenroth J, Mudawar I, Fisher TS. Parametric study of a thermosyphon loop pressure drop model American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 375: 407-413. DOI: 10.1115/IMECE2004-60251 |
0.504 |
|
| 2004 |
Qu W, Yoon SM, Mudawar I. Two-phase flow and heat transfer in rectangular micro-channels Journal of Electronic Packaging, Transactions of the Asme. 126: 288-300. DOI: 10.1115/1.1756589 |
0.765 |
|
| 2004 |
Bernardin JD, Mudawar I. A Leidenfrost point model for impinging droplets and sprays Journal of Heat Transfer. 126: 272-278. DOI: 10.1115/1.1652045 |
0.424 |
|
| 2004 |
Zhang H, Mudawar I, Hasan MM. A method for assessing the importance of body force on flow boiling CHF Journal of Heat Transfer. 126: 161-168. DOI: 10.1115/1.1651532 |
0.53 |
|
| 2004 |
Qu W, Mudawar I. Measurement and correlation of critical heat flux in two-phase micro-channel heat sinks International Journal of Heat and Mass Transfer. 47: 2045-2059. DOI: 10.1016/J.Ijheatmasstransfer.2003.12.006 |
0.767 |
|
| 2004 |
Zhang H, Mudawar I, Hasan MM. Investigation of interfacial behavior during the flow boiling CHF transient International Journal of Heat and Mass Transfer. 47: 1275-1288. DOI: 10.1016/J.Ijheatmasstransfer.2003.09.014 |
0.542 |
|
| 2003 |
Mukherjee S, Mudawar I. Pumpless loop for narrow channel and micro-channel boiling Journal of Electronic Packaging, Transactions of the Asme. 125: 431-441. DOI: 10.1115/1.1602708 |
0.587 |
|
| 2003 |
Qu W, Mudawar I. Thermal Design Methodology for High-Heat-Flux Single-Phase and Two-Phase Micro-Channel Heat Sinks Ieee Transactions On Components and Packaging Technologies. 26: 598-609. DOI: 10.1109/Tcapt.2003.817652 |
0.753 |
|
| 2003 |
Mukherjee S, Mudawar I. Smart pumpless loop for micro-channel electronic cooling using flat and enhanced surfaces Ieee Transactions On Components and Packaging Technologies. 26: 99-109. DOI: 10.1109/Tcapt.2003.811478 |
0.558 |
|
| 2003 |
Qu W, Mudawar I. Measurement and prediction of pressure drop in two-phase micro-channel heat sinks International Journal of Heat and Mass Transfer. 46: 2737-2753. DOI: 10.1016/S0017-9310(03)00044-9 |
0.738 |
|
| 2003 |
Qu W, Mudawar I. Flow boiling heat transfer in two-phase micro-channel heat sinks - II. Annular two-phase flow model International Journal of Heat and Mass Transfer. 46: 2773-2784. DOI: 10.1016/S0017-9310(03)00042-5 |
0.799 |
|
| 2003 |
Qu W, Mudawar I. Flow boiling heat transfer in two-phase micro-channel heat sinks-I. Experimental investigation and assessment of correlation methods International Journal of Heat and Mass Transfer. 46: 2755-2771. DOI: 10.1016/S0017-9310(03)00041-3 |
0.797 |
|
| 2002 |
Wen CD, Mudawar I. Experimental investigation of emissivity of aluminum alloys and temperature determination using multispectral radiation thermometry (MRT) algorithms Journal of Materials Engineering and Performance. 11: 551-562. DOI: 10.1361/105994902770343818 |
0.311 |
|
| 2002 |
Zhang H, Mudawar I, Hasan MM. Photographic study of orientation effects on near-saturated flow boiling American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 372: 187-197. DOI: 10.1115/IMECE2002-39063 |
0.448 |
|
| 2002 |
Lee SY, Wereley ST, Gui L, Qu W, Mudawar I. Microchannel flow measurement using micro particle image velocimetry Asme International Mechanical Engineering Congress and Exposition, Proceedings. 493-500. DOI: 10.1115/IMECE2002-33682 |
0.335 |
|
| 2002 |
Qu W, Mudawar I. Transport phenomena in two-phase micro-channel heat sinks Asme International Mechanical Engineering Congress and Exposition, Proceedings. 7: 135-147. DOI: 10.1115/1.1756145 |
0.775 |
|
| 2002 |
Bernardin JD, Mudawar I. A cavity activation and bubble growth model of the Leidenfrost point Journal of Heat Transfer. 124: 864-874. DOI: 10.1115/1.1470487 |
0.388 |
|
| 2002 |
Mukherjee S, Mudawar I. Smart, low-cost, pumpless loop for micro-channel electronic cooling using flat and enhanced surfaces Thermomechanical Phenomena in Electronic Systems -Proceedings of the Intersociety Conference. 360-370. DOI: 10.1109/ITHERM.2002.1012479 |
0.466 |
|
| 2002 |
Zhang H, Mudawar I, Hasan MM. Experimental and theoretical study of orientation effects on flow boiling CHF International Journal of Heat and Mass Transfer. 45: 4463-4477. DOI: 10.1016/S0017-9310(02)00152-7 |
0.595 |
|
| 2002 |
Zhang H, Mudawar I, Hasan MM. Experimental assessment of the effects of body force, surface tension force, and inertia on flow boiling CHF International Journal of Heat and Mass Transfer. 45: 4079-4095. DOI: 10.1016/S0017-9310(02)00133-3 |
0.574 |
|
| 2002 |
Qu W, Mudawar I. Prediction and measurement of incipient boiling heat flux in micro-channel heat sinks International Journal of Heat and Mass Transfer. 45: 3933-3945. DOI: 10.1016/S0017-9310(02)00106-0 |
0.782 |
|
| 2002 |
Qu W, Mudawar I. Analysis of three-dimensional heat transfer in micro-channel heat sinks International Journal of Heat and Mass Transfer. 45: 3973-3985. DOI: 10.1016/S0017-9310(02)00101-1 |
0.791 |
|
| 2002 |
Qu W, Mudawar I. Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink International Journal of Heat and Mass Transfer. 45: 2549-2565. DOI: 10.1016/S0017-9310(01)00337-4 |
0.778 |
|
| 2001 |
Mudawar I. Assessment of high-heat-flux thermal management schemes Ieee Transactions On Components and Packaging Technologies. 24: 122-141. DOI: 10.1109/6144.926375 |
0.577 |
|
| 2000 |
Hall DD, Mudawar I. Critical heat flux (CHF) for water flow in tubes-II. Subcooled CHF correlations International Journal of Heat and Mass Transfer. 43: 2605-2640. DOI: 10.1016/S0017-9310(99)00192-1 |
0.561 |
|
| 2000 |
Hall DD, Mudawar I. Critical heat flux (CHF) for water flow in tubes-I. Compilation and assessment of world CHF data International Journal of Heat and Mass Transfer. 43: 2573-2604. DOI: 10.1016/S0017-9310(99)00191-X |
0.541 |
|
| 2000 |
LaClair TJ, Mudawar I. Thermal transients in a capillary evaporator prior to the initiation of boiling International Journal of Heat and Mass Transfer. 43: 3937-3952. DOI: 10.1016/S0017-9310(00)00042-9 |
0.592 |
|
| 2000 |
Howard AH, Mudawar I. Pool boiling critical heat flux on a downward-facing convex surface American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 366: 21-29. |
0.371 |
|
| 1999 |
Bernardin JD, Mudawar I. The Leidenfrost point: Experimental study and assessment of existing models Journal of Heat Transfer. 121: 894-903. DOI: 10.1115/1.2826080 |
0.428 |
|
| 1999 |
Sturgis JC, Mudawar I. Assessment of CHF enhancement mechanisms in a curved, rectangular channel subjected to concave heating Journal of Heat Transfer. 121: 394-404. DOI: 10.1115/1.2825992 |
0.632 |
|
| 1999 |
Sturgis JC, Mudawar I. Critical heat flux in a long, curved channel subjected to concave heating International Journal of Heat and Mass Transfer. 42: 3831-3848. DOI: 10.1016/S0017-9310(99)00040-X |
0.601 |
|
| 1999 |
Reed SJ, Mudawar I. Elimination of boiling incipience temperature drop in highly wetting fluids using spherical contact with a flat surface International Journal of Heat and Mass Transfer. 42: 2439-2454. DOI: 10.1016/S0017-9310(98)00331-7 |
0.421 |
|
| 1999 |
Sturgis JC, Mudawar I. Critical heat flux in a long, rectangular channel subjected to one-sided heating-II. Analysis of critical heat flux data International Journal of Heat and Mass Transfer. 42: 1849-1862. DOI: 10.1016/S0017-9310(98)00275-0 |
0.658 |
|
| 1999 |
Sturgis JC, Mudawar I. Critical heat flux in a long, rectangular channel subjected to one-sided heating-I. flow visualization International Journal of Heat and Mass Transfer. 42: 1835-1847. DOI: 10.1016/S0017-9310(98)00274-9 |
0.668 |
|
| 1999 |
Hall DD, Mudawar I. Ultra-high critical heat flux (CHF) for subcooled water flow boiling-II: High-CHF database and design equations International Journal of Heat and Mass Transfer. 42: 1429-1456. DOI: 10.1016/S0017-9310(98)00242-7 |
0.583 |
|
| 1999 |
Mudawar I, Bowers MB. Ultra-high critical heat flux (CHF) for subcooled water flow boiling-I: CHF data and parametric effects for small diameter tubes International Journal of Heat and Mass Transfer. 42: 1405-1428. DOI: 10.1016/S0017-9310(98)00241-5 |
0.596 |
|
| 1999 |
Howard AH, Mudawar I. Orientation effects on pool boiling critical heat flux (CHF) and modeling of CHF for near-vertical surfaces International Journal of Heat and Mass Transfer. 42: 1665-1688. DOI: 10.1016/S0017-9310(98)00233-6 |
0.428 |
|
| 1999 |
Sturgis JC, Mudawar I. Single-phase heat transfer enhancement in a curved, rectangular channel subjected to concave heating International Journal of Heat and Mass Transfer. 42: 1255-1272. DOI: 10.1016/S0017-9310(98)00232-4 |
0.663 |
|
| 1997 |
Hall DD, Mudawar I. Evaluation of subcooled critical heat flux correlations using the PU-BTPFL CHF database for vertical upflow of water in a uniformly heated round tube Nuclear Technology. 117: 234-246. DOI: 10.13182/Nt97-A35328 |
0.587 |
|
| 1997 |
Bernardin JD, Mudawar I. Film boiling heat transfer of droplet streams and sprays International Journal of Heat and Mass Transfer. 40: 2579-2593. DOI: 10.1016/S0017-9310(96)00297-9 |
0.586 |
|
| 1997 |
Reed SJ, Mudawar I. Enhancement of boiling heat transfer using highly wetting liquids with pressed-on fins at low contact forces International Journal of Heat and Mass Transfer. 40: 2379-2392. DOI: 10.1016/S0017-9310(96)00286-4 |
0.575 |
|
| 1997 |
Bernardin JD, Mudawar I, Walsh CB, Franses EI. Contact angle temperature dependence for water droplets on practical aluminum surfaces International Journal of Heat and Mass Transfer. 40: 1017-1033. DOI: 10.1016/0017-9310(96)00184-6 |
0.389 |
|
| 1997 |
Bernardin JD, Stebbins CJ, Mudawar I. Mapping of impact and heat transfer regimes of water drops impinging on a polished surface International Journal of Heat and Mass Transfer. 40: 247-267. DOI: 10.1016/0017-9310(96)00119-6 |
0.581 |
|
| 1997 |
Hall DD, Mudawar I, Morgan RE, Ehlers SL. Validation of a systematic approach to modeling spray quenching of aluminum alloy extrusions, composites, and continuous castings Journal of Materials Engineering and Performance. 6: 77-92. DOI: 10.1007/S11665-997-0036-X |
0.47 |
|
| 1997 |
Mudawar I, Howard AH, Gersey CO. An analytical model for near-saturated pool boiling critical heat flux on vertical surfaces International Journal of Heat and Mass Transfer. 40: 2327-2339. |
0.5 |
|
| 1996 |
Mudawar I, Estes KA. Optimizing and predicting CHF in spray cooling of a square surface Journal of Heat Transfer. 118: 672-679. DOI: 10.1115/1.2822685 |
0.486 |
|
| 1996 |
Bernardin JD, Mudawar I. An experimental investigation into the relationship between temperature-time history and surface roughness in the spray quenching of aluminum parts Journal of Engineering Materials and Technology, Transactions of the Asme. 118: 127-134. DOI: 10.1115/1.2805925 |
0.363 |
|
| 1996 |
Johns ME, Mudawar I. An Ultra-High Power Two-Phase Jet-Impingement Avionic Clamshell Module Journal of Electronic Packaging, Transactions of the Asme. 118: 264-270. DOI: 10.1115/1.2792162 |
0.553 |
|
| 1996 |
Hall DD, Mudawar I. Optimization of quench history of aluminum parts for superior mechanical properties International Journal of Heat and Mass Transfer. 39: 81-95. DOI: 10.1016/S0017-9310(96)85008-3 |
0.376 |
|
| 1996 |
Bernardin JD, Stebbins CJ, Mudawar I. Effects of surface roughness on water droplet impact history and heat transfer regimes International Journal of Heat and Mass Transfer. 40: 73-78. DOI: 10.1016/S0017-9310(96)00067-1 |
0.524 |
|
| 1996 |
Bernardin JD, Mudawar I. Experimental and statistical investigation of changes in surface roughness associated with spray quenching International Journal of Heat and Mass Transfer. 39: 2023-2037. DOI: 10.1016/0017-9310(95)00304-5 |
0.41 |
|
| 1996 |
Hall DD, Mudawar I. Evaluation of subcooled chf correlations using the PU-BTPFL CHF database for vertical upflow of water in a uniformly heated round tube American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 326: 117-127. |
0.494 |
|
| 1995 |
Galloway JE, Mudawar I. Theoretical model for flow boiling CHF from short concave heaters Journal of Heat Transfer. 117: 698-707. DOI: 10.1115/1.2822633 |
0.444 |
|
| 1995 |
Hall DD, Mudawar I. Predicting the impact of quenching on mechanical properties of complex-shaped aluminum alloy parts Journal of Heat Transfer. 117: 479-488. DOI: 10.1115/1.2822547 |
0.423 |
|
| 1995 |
Estes KA, Mudawar I. Comparison of Two-Phase Electronic Cooling Using Free Jets and Sprays Journal of Electronic Packaging. 117: 323-332. DOI: 10.1115/1.2792112 |
0.554 |
|
| 1995 |
Estes KA, Mudawar I. Correlation of sauter mean diameter and critical heat flux for spray cooling of small surfaces International Journal of Heat and Mass Transfer. 38: 2985-2996. DOI: 10.1016/0017-9310(95)00046-C |
0.61 |
|
| 1995 |
Hall DD, Mudawar I. Experimental and numerical study of quenching complex-shaped metallic alloys with multiple, overlapping sprays International Journal of Heat and Mass Transfer. 38: 1201-1216. DOI: 10.1016/0017-9310(94)00244-P |
0.504 |
|
| 1995 |
Bernardin JD, Mudawar I. Validation of the quench factor technique in predicting hardness in heat treatable aluminum alloys International Journal of Heat and Mass Transfer. 38: 863-873. DOI: 10.1016/0017-9310(94)00204-9 |
0.436 |
|
| 1995 |
Gersey CO, Mudawar I. Effects of heater length and orientation on the trigger mechanism for near-saturated flow boiling critical heat flux-II. Critical heat flux model International Journal of Heat and Mass Transfer. 38: 643-654. DOI: 10.1016/0017-9310(94)00194-Z |
0.618 |
|
| 1995 |
Gersey CO, Mudawar I. Effects of heater length and orientation on the trigger mechanism for near-saturated flow boiling critical heat flux-I. Photographic study and statistical characterization of the near-wall interfacial features International Journal of Heat and Mass Transfer. 38: 629-641. DOI: 10.1016/0017-9310(94)00193-Y |
0.557 |
|
| 1994 |
Bowers MB, Mudawar I. Two-phase electronic cooling using mini-channel and micro-channel heat sinks: Part 2 - flow rate and pressure drop constraints Journal of Electronic Packaging, Transactions of the Asme. 116: 298-305. DOI: 10.1115/1.2905701 |
0.566 |
|
| 1994 |
Bowers MB, Mudawar I. Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks: Part 1—Design Criteria and Heat Diffusion Constraints Journal of Electronic Packaging. 116: 290-297. DOI: 10.1115/1.2905700 |
0.526 |
|
| 1994 |
Jimenez PE, Mudawar I. A Multi-Kilowatt Immersion-Cooled Standard Electronic Clamshell Module for Future Aircraft Avionics Journal of Electronic Packaging. 116: 220-229. DOI: 10.1115/1.2905689 |
0.481 |
|
| 1994 |
Mudawar I, Jimenez PE, Morgan RE. Immersion-Cooled Standard Electronic Clamshell Module: A Building Block for Future High-Flux Avionic Systems Journal of Electronic Packaging. 116: 116-125. DOI: 10.1115/1.2905499 |
0.493 |
|
| 1994 |
Bowers MB, Mudawar I. High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks International Journal of Heat and Mass Transfer. 37: 321-332. DOI: 10.1016/0017-9310(94)90103-1 |
0.62 |
|
| 1994 |
Mudawar I, Deiters TA. A universal approach to predicting temperature response of metallic parts to spray quenching International Journal of Heat and Mass Transfer. 37: 347-362. DOI: 10.1016/0017-9310(94)90070-1 |
0.51 |
|
| 1993 |
Gersey CO, Mudawar I. Orientation effects on critical heat flux from discrete, in-line heat sources in a flow channel Transactions - Asme: Journal of Heat Transfer. 115: 973-985. DOI: 10.1115/1.2911394 |
0.642 |
|
| 1993 |
Mudawar I, Anderson TM. Optimization of enhanced surfaces for high flux chip cooling by pool boiling Journal of Electronic Packaging, Transactions of the Asme. 115: 89-100. DOI: 10.1115/1.2909306 |
0.458 |
|
| 1993 |
Gersey CO, Mudawar I. Nucleate boiling and critical heat flux from protruded chip arrays during flow boiling Journal of Electronic Packaging, Transactions of the Asme. 115: 78-88. DOI: 10.1115/1.2909305 |
0.633 |
|
| 1993 |
Galloway JE, Mudawar I. CHF mechanism in flow boiling from a short heated wall-II. Theoretical CHF model International Journal of Heat and Mass Transfer. 36: 2527-2540. DOI: 10.1016/S0017-9310(05)80191-7 |
0.552 |
|
| 1993 |
Galloway JE, Mudawar I. CHF mechanism in flow boiling from a short heated wall-I. Examination of near-wall conditions with the aid of photomicrography and high-speed video imaging International Journal of Heat and Mass Transfer. 36: 2511-2526. DOI: 10.1016/S0017-9310(05)80190-5 |
0.489 |
|
| 1993 |
Mudawar I, Houpt RA. Mass and momentum transport in smooth falling liquid films laminarized at relatively high Reynolds numbers International Journal of Heat and Mass Transfer. 36: 3437-3448. DOI: 10.1016/0017-9310(93)90162-Y |
0.351 |
|
| 1993 |
Mudawar I, Houpt RA. Measurement of mass and momentum transport in wavy-laminar falling liquid films International Journal of Heat and Mass Transfer. 36: 4151-4162. DOI: 10.1016/0017-9310(93)90077-J |
0.363 |
|
| 1992 |
Wadsworth DC, Mudawar I. Enhancement of single-phase heat transfer and critical heat flux from an ultra-high-flux simulated microelectronic heat source to a rectangular impinging jet of dielectric liquid Journal of Heat Transfer. 114: 764-768. DOI: 10.1115/1.2911348 |
0.597 |
|
| 1992 |
Gersey CO, Mudawar I. Effects of Orientation on Critical Heat Flux From Chip Arrays During Flow Boiling Journal of Electronic Packaging. 114: 290-299. DOI: 10.1115/1.2905453 |
0.587 |
|
| 1992 |
Gersey CO, Willingham TC, Mudawar I. Design Parameters and Practical Considerations in the Two-Phase Forced-Convection Cooling of Multi-Chip Modules Journal of Electronic Packaging. 114: 280-289. DOI: 10.1115/1.2905452 |
0.503 |
|
| 1992 |
Willingham T, Mudawar I. Forced-convection boiling and critical heat flux from a linear array of discrete heat sources International Journal of Heat and Mass Transfer. 35: 2879-2890. DOI: 10.1016/0017-9310(92)90308-F |
0.59 |
|
| 1992 |
Willingham T, Mudawar I. Channel height effects on forced-convection boiling and critical heat flux from a linear array of discrete heat sources International Journal of Heat and Mass Transfer. 35: 1865-1880. DOI: 10.1016/0017-9310(92)90190-4 |
0.594 |
|
| 1992 |
Galloway JE, Mudawar I. Critical heat flux enhancement by means of liquid subcooling and centrifugal force induced by flow curvature International Journal of Heat and Mass Transfer. 35: 1247-1260. DOI: 10.1016/0017-9310(92)90182-R |
0.605 |
|
| 1992 |
Klinzing WP, Rozzi JC, Mudawar I. Film and transition boiling correlations for quenching of hot surfaces with water sprays Journal of Heat Treating. 9: 91-103. DOI: 10.1007/Bf02833145 |
0.473 |
|
| 1992 |
Rozzi JC, Klinzing WP, Mudawar I. Effects of spray configuration on the uniformity of cooling rate and hardness in the quenching of aluminum parts with nonuniform shapes Journal of Materials Engineering and Performance. 1: 49-60. DOI: 10.1007/Bf02650032 |
0.311 |
|
| 1991 |
Lyu T, Mudawar I. SIMULTANEOUS MEASUREMENTS OF THICKNESS AND TEMPERATURE PROFILE IN A WAVY LIQUID FILM FALLING FREELY ON A HEATING WALL Experimental Heat Transfer. 4: 217-233. DOI: 10.1080/08916159108946415 |
0.377 |
|
| 1991 |
Mudawar I, Wadsworth DC. Critical heat flux from a simulated chip to a confined rectangular impinging jet of dielectric liquid International Journal of Heat and Mass Transfer. 34: 1465-1479. DOI: 10.1016/0017-9310(91)90289-Q |
0.635 |
|
| 1991 |
Lyu T, Mudawar I. Statistical investigation of the relationship between interfacial waviness and sensible heat transfer to a falling liquid film International Journal of Heat and Mass Transfer. 34: 1451-1464. DOI: 10.1016/0017-9310(91)90288-P |
0.509 |
|
| 1991 |
Lyu T, Mudawar I. Determination of wave-induced fluctuations of wall temperature and convection heat transfer coefficient in the heating of a turbulent falling liquid film International Journal of Heat and Mass Transfer. 34: 2521-2534. DOI: 10.1016/0017-9310(91)90093-T |
0.52 |
|
| 1990 |
Wadsworth DC, Mudawar I. Cooling of a Multichip Electronic Module by Means of Confined Two-Dimensional Jets of Dielectric Liquid Journal of Heat Transfer-Transactions of the Asme. 112: 891-898. DOI: 10.1115/1.2910496 |
0.639 |
|
| 1990 |
Mudawar I, Anderson TM. Parametric Investigation Into the Effects of Pressure, Subcooling, Surface Augmentation and Choice of Coolant on Pool Boiling in the Design of Cooling Systems for High-Power-Density Electronic Chips Journal of Electronic Packaging. 112: 375-382. DOI: 10.1115/1.2904392 |
0.536 |
|
| 1990 |
Mudawar I, Maddox DE. Enhancement of Critical Heat Flux From High Power Microelectronic Heat Sources in a Flow Channel Journal of Electronic Packaging. 112: 241-248. DOI: 10.1115/1.2904373 |
0.598 |
|
| 1990 |
Deiters TA, Mudawar I. Prediction of the temperature–time cooling curves for three-dimensional aluminum products during spray quenching Journal of Heat Treating. 8: 81-91. DOI: 10.1007/Bf02831628 |
0.525 |
|
| 1989 |
Maddox DE, Mudawar I. Single- and Two-Phase Convective Heat Transfer From Smooth and Enhanced Microelectronic Heat Sources in a Rectangular Channel Journal of Heat Transfer-Transactions of the Asme. 111: 1045-1052. DOI: 10.1115/1.3250766 |
0.631 |
|
| 1989 |
Anderson TM, Mudawar I. Microelectronic Cooling by Enhanced Pool Boiling of a Dielectric Fluorocarbon Liquid Journal of Heat Transfer. 111: 752-759. DOI: 10.1115/1.3250747 |
0.519 |
|
| 1989 |
Marsh WJ, Mudawar I. Sensible Heating and Boiling Incipience in Free-Falling Dielectric Liquid Films Journal of Electronic Packaging. 111: 46-53. DOI: 10.1115/1.3226508 |
0.564 |
|
| 1989 |
Mudawar I, Maddox D. Critical heat flux in subcooled flow boiling of fluorocarbon liquid on a simulated electronic chip in a vertical rectangular channel International Journal of Heat and Mass Transfer. 32: 379-394. DOI: 10.1016/0017-9310(89)90184-1 |
0.555 |
|
| 1989 |
Marsh W, Mudawar I. Predicting the onset of nucleate boiling in wavy free-falling turbulent liquid films International Journal of Heat and Mass Transfer. 32: 361-378. DOI: 10.1016/0017-9310(89)90183-X |
0.421 |
|
| 1989 |
Mudawar I, Valentine WS. Determination of the local quench curve for spray-cooled metallic surfaces Journal of Heat Treating. 7: 107-121. DOI: 10.1007/Bf02833195 |
0.506 |
|
| 1989 |
Deiters TA, Mudawar I. Optimization of spray quenching for aluminum extrusion, forging, or continuous casting Journal of Heat Treating. 7: 9-18. DOI: 10.1007/Bf02833183 |
0.484 |
|
| Show low-probability matches. |