| Year |
Citation |
Score |
| 2019 |
Zhao Y, Ovaert TC. Error Estimation of Nanoindentation Mechanical Properties Near a Dissimilar Interface via Finite Element Analysis and Analytical Solution Methods. Journal of Materials Research. 25: 2308-2316. PMID 21528107 DOI: 10.1557/JMR.2010.0295 |
0.333 |
|
| 2016 |
Bonitsky CM, McGann ME, Selep MJ, Ovaert TC, Trippel SB, Wagner DR. Genipin crosslinking decreases the mechanical wear and biochemical degradation of imacted cartilage in vitro. Journal of Orthopaedic Research : Official Publication of the Orthopaedic Research Society. PMID 27584857 DOI: 10.1002/Jor.23411 |
0.354 |
|
| 2015 |
McGann ME, Bonitsky CM, Jackson ML, Ovaert TC, Trippel SB, Wagner DR. Genipin crosslinking of cartilage enhances resistance to biochemical degradation and mechanical wear. Journal of Orthopaedic Research : Official Publication of the Orthopaedic Research Society. 33: 1571-9. PMID 25939430 DOI: 10.1002/Jor.22939 |
0.347 |
|
| 2014 |
McGann ME, Bonitsky CM, Ovaert TC, Wagner DR. The effect of collagen crosslinking on the biphasic poroviscoelastic cartilage properties determined from a semi-automated microindentation protocol for stress relaxation. Journal of the Mechanical Behavior of Biomedical Materials. 34: 264-72. PMID 24631625 DOI: 10.1016/J.Jmbbm.2014.02.013 |
0.455 |
|
| 2013 |
Blum MM, Ovaert TC. Low friction hydrogel for articular cartilage repair: evaluation of mechanical and tribological properties in comparison with natural cartilage tissue. Materials Science & Engineering. C, Materials For Biological Applications. 33: 4377-83. PMID 23910356 DOI: 10.1016/J.Msec.2013.06.035 |
0.733 |
|
| 2013 |
Bayer IS, Ghosh A, Labriola M, Biris AS, Dervishi E, Watanabe F, Wang T, Slaboch C, Ovaert TC, Biswas A. Fabrication of bionanocomposites comprising flat nanocrystals of calcium in collagen fibers exhibiting hardness comparable to metal Rsc Advances. 3: 20315. DOI: 10.1039/C3Ra43121E |
0.368 |
|
| 2013 |
Blum MM, Ovaert TC. Investigation of friction and surface degradation of innovative boundary lubricant functionalized hydrogel material for use as artificial articular cartilage Wear. 301: 201-209. DOI: 10.1016/J.Wear.2012.11.042 |
0.733 |
|
| 2013 |
Bagault C, Nelias D, Baietto M, Ovaert TC. Contact analyses for anisotropic half-space coated with an anisotropic layer: Effect of the anisotropy on the pressure distribution and contact area International Journal of Solids and Structures. 50: 743-754. DOI: 10.1016/J.Ijsolstr.2012.11.002 |
0.381 |
|
| 2012 |
Zhao Y, Wu Z, Turner S, MacLeay J, Niebur GL, Ovaert TC. Indentation experiments and simulation of ovine bone using a viscoelastic-plastic damage model. Journal of Materials Research. 27: 368-377. PMID 26136623 DOI: 10.1557/Jmr.2011.357 |
0.417 |
|
| 2012 |
Vahdati A, Zhao Y, Ovaert TC, Wagner DR. Computational investigation of fibrin mechanical and damage properties at the interface between native cartilage and implant. Journal of Biomechanical Engineering. 134: 111004. PMID 23387786 DOI: 10.1115/1.4007748 |
0.388 |
|
| 2012 |
Blum MM, Ovaert TC. Experimental and numerical tribological studies of a boundary lubricant functionalized poro-viscoelastic PVA hydrogel in normal contact and sliding. Journal of the Mechanical Behavior of Biomedical Materials. 14: 248-58. PMID 22947923 DOI: 10.1016/J.Jmbbm.2012.06.009 |
0.726 |
|
| 2012 |
Blum MM, Ovaert TC. A novel polyvinyl alcohol hydrogel functionalized with organic boundary lubricant for use as low-friction cartilage substitute: synthesis, physical/chemical, mechanical, and friction characterization. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 100: 1755-63. PMID 22807285 DOI: 10.1002/Jbm.B.32742 |
0.732 |
|
| 2012 |
Slaboch CL, Alber MS, Rosen ED, Ovaert TC. Mechano-rheological properties of the murine thrombus determined via nanoindentation and finite element modeling. Journal of the Mechanical Behavior of Biomedical Materials. 10: 75-86. PMID 22520420 DOI: 10.1016/J.Jmbbm.2012.02.012 |
0.377 |
|
| 2012 |
Wu Z, Ovaert TC, Niebur GL. Viscoelastic properties of human cortical bone tissue depend on gender and elastic modulus. Journal of Orthopaedic Research : Official Publication of the Orthopaedic Research Society. 30: 693-9. PMID 22052806 DOI: 10.1002/Jor.22001 |
0.371 |
|
| 2012 |
Labriola M, Slaboch C, Ovaert TC, Wang T, Csaba G, Bayer IS, Dervishi E, Biris AS, Ghosh A, Gupta R, Biswas A. Engineered Bone-Inspired Multicomponent Bionanocomposite Scaffolds with Tunable Hardness and Modulus Mrs Proceedings. 1465. DOI: 10.1557/Opl.2012.1130 |
0.337 |
|
| 2011 |
Shepherd TN, Zhang J, Ovaert TC, Roeder RK, Niebur GL. Direct comparison of nanoindentation and macroscopic measurements of bone viscoelasticity. Journal of the Mechanical Behavior of Biomedical Materials. 4: 2055-62. PMID 22098905 DOI: 10.1016/J.Jmbbm.2011.07.004 |
0.67 |
|
| 2011 |
Wu Z, Baker TA, Ovaert TC, Niebur GL. The effect of holding time on nanoindentation measurements of creep in bone. Journal of Biomechanics. 44: 1066-72. PMID 21353675 DOI: 10.1016/J.Jbiomech.2011.01.039 |
0.37 |
|
| 2011 |
Liu K, Ovaert TC. Poro-viscoelastic constitutive modeling of unconfined creep of hydrogels using finite element analysis with integrated optimization method. Journal of the Mechanical Behavior of Biomedical Materials. 4: 440-50. PMID 21316632 DOI: 10.1016/J.Jmbbm.2010.12.005 |
0.682 |
|
| 2011 |
Biswas A, Ovaert TC, Slaboch C, Zhao H, Bayer IS, Biris AS, Wang T. Mineral concentration dependent modulation of mechanical properties of bone-inspired bionanocomposite scaffold Applied Physics Letters. 99: 013702. DOI: 10.1063/1.3607283 |
0.387 |
|
| 2010 |
Zhang J, Michalenko MM, Kuhl E, Ovaert TC. Characterization of indentation response and stiffness reduction of bone using a continuum damage model. Journal of the Mechanical Behavior of Biomedical Materials. 3: 189-202. PMID 20129418 DOI: 10.1016/J.Jmbbm.2009.08.001 |
0.688 |
|
| 2010 |
Blum MM, Ovaert T. Boundary Lubricant - Functionalized PVA Gels for Biotribological Applications Mrs Proceedings. 1272. DOI: 10.1557/Proc-1272-Pp09-14 |
0.742 |
|
| 2009 |
Liu K, VanLandingham MR, Ovaert TC. Mechanical characterization of soft viscoelastic gels via indentation and optimization-based inverse finite element analysis. Journal of the Mechanical Behavior of Biomedical Materials. 2: 355-62; discussion 3. PMID 19627842 DOI: 10.1016/J.Jmbbm.2008.12.001 |
0.687 |
|
| 2009 |
Wang J, Ovaert TC. Computational mechanical property determination of viscoelastic/plastic materials from nanoindentation creep test data Journal of Materials Research. 24: 1245-1257. DOI: 10.1557/Jmr.2009.0141 |
0.45 |
|
| 2008 |
Liu K, Ovaert TC, Mason JJ. Preparation and mechanical characterization of a PNIPA hydrogel composite. Journal of Materials Science. Materials in Medicine. 19: 1815-21. PMID 18040754 DOI: 10.1007/S10856-007-3325-X |
0.638 |
|
| 2008 |
Zhang J, Niebur GL, Ovaert TC. Mechanical property determination of bone through nano- and micro-indentation testing and finite element simulation. Journal of Biomechanics. 41: 267-75. PMID 17961578 DOI: 10.1016/J.Jbiomech.2007.09.019 |
0.689 |
|
| 2008 |
He L, Ovaert TC. Three-Dimensional Rough Surface Contact Model for Anisotropic Materials Journal of Tribology-Transactions of the Asme. 130: 21402. DOI: 10.1115/1.2908910 |
0.544 |
|
| 2008 |
He L, Ovaert TC. Heat Partitioning Coefficient Calculations for Sliding Contacts with Friction Tribology Transactions. 51: 12-18. DOI: 10.1080/10402000701739248 |
0.494 |
|
| 2006 |
Lin Y, Ovaert TC. Thermal Distortion of an Anisotropic Elastic Half-Plane and its Application in Contact Problems Including Frictional Heating Journal of Tribology-Transactions of the Asme. 128: 32-39. DOI: 10.1115/1.2125907 |
0.348 |
|
| 2004 |
Lin Y, Ovaert TC. Thermoelastic Problems for the Anisotropic Elastic Half-Plane Journal of Tribology-Transactions of the Asme. 126: 459-465. DOI: 10.1115/1.1760553 |
0.346 |
|
| 2004 |
Lin Y, Ovaert TC. A Two-Dimensional Thermoelastic Rough Surface Contact Model Journal of Tribology-Transactions of the Asme. 126: 430-435. DOI: 10.1115/1.1739243 |
0.369 |
|
| 2004 |
Lin Y, Ovaert TC. A Rough Surface Contact Model for General Anisotropic Materials Journal of Tribology-Transactions of the Asme. 126: 41-49. DOI: 10.1115/1.1609491 |
0.37 |
|
| 2003 |
Lin Y, Ovaert TC. The Stress and Displacement Fields Produced in a Semi-Infinite Solid by a Uniform Heat Source Over a Rectangular Area on the Surface Journal of Tribology-Transactions of the Asme. 125: 709-712. DOI: 10.1115/1.1573234 |
0.303 |
|
| 2003 |
Shi D, Lin Y, Ovaert TC. Indentation of an Orthotropic Half-Space by a Rigid Ellipsoidal Indenter Journal of Tribology-Transactions of the Asme. 125: 223-231. DOI: 10.1115/1.1537743 |
0.396 |
|
| 2003 |
Ovaert TC, Kim BR, Wang J. Multi-parameter models of the viscoelastic/plastic mechanical properties of coatings via combined nanoindentation and non-linear finite element modeling Progress in Organic Coatings. 47: 312-323. DOI: 10.1016/S0300-9440(03)00145-0 |
0.424 |
|
| 2002 |
Ovaert TC, Pan J. Optimal Design of Layered Structures Under Normal (Frictionless) Contact Loading Journal of Tribology. 124: 438-442. DOI: 10.1115/1.1467633 |
0.325 |
|
| 2000 |
Ramachandra S, Ovaert TC. Effect of Coating Geometry on Contact Stresses in Two-Dimensional Discontinuous Coatings Journal of Tribology. 122: 665-671. DOI: 10.1115/1.1310333 |
0.315 |
|
| 1999 |
Ovaert TC, Talmage G. The Temperature of Sliding Contacts: Application to the Anisotropic Half-Space Tribology Transactions. 42: 654-660. DOI: 10.1080/10402009908982266 |
0.323 |
|
| 1998 |
Casalena JA, Badre-Alam A, Ovaert TC, Cavanagh PR, Streit DA. The Penn State Safety Floor: Part II--Reduction of fall-related peak impact forces on the femur. Journal of Biomechanical Engineering. 120: 527-32. PMID 10412424 DOI: 10.1115/1.2798023 |
0.4 |
|
| 1998 |
Casalena JA, Ovaert TC, Cavanagh PR, Streit DA. The Penn State Safety Floor: Part I--Design parameters associated with walking deflections. Journal of Biomechanical Engineering. 120: 518-26. PMID 10412423 DOI: 10.1115/1.2798022 |
0.362 |
|
| 1998 |
Ovaert TC, Badger JA. Sliding Friction and Heat Generation in Pressurized U-Cup Seals Under Low-Speed Reciprocating Conditions Journal of Tribology. 120: 325-331. DOI: 10.1115/1.2834430 |
0.338 |
|
| 1997 |
Ovaert TC, Ramachandra S. Wear Particle Formation of Polymers Against Smooth Hardened Steel Counterfaces Tribology Transactions. 40: 445-452. DOI: 10.1080/10402009708983679 |
0.334 |
|
| 1997 |
Ovaert TC. Wear of Unidirectional Polymer Matrix Composites with Fiber Orientation in the Plane of Contact Tribology Transactions. 40: 227-234. DOI: 10.1080/10402009708983649 |
0.356 |
|
| 1997 |
Ramachandra S, Ovaert T. The effect of controlled surface topographical features on the unlubricated transfer and wear of PEEK Wear. 206: 94-99. DOI: 10.1016/S0043-1648(96)07354-1 |
0.337 |
|
| 1995 |
Haverstick JK, Ovaert TC. Polymer/Metal Conformal Sliding Contact With Forced Convective Cooling Journal of Tribology-Transactions of the Asme. 117: 1-8. DOI: 10.1115/1.2830601 |
0.387 |
|
| 1995 |
Ovaert TC. On the Wear Behavior of Longitudinally (Parallel) Oriented Unidirectional Fiber-Reinforced Polymer Composites Tribology Transactions. 38: 27-34. DOI: 10.1080/10402009508983376 |
0.363 |
|
| 1994 |
Wu J, Ovaert TC. Effect of Asperity-Scale Tensile Stresses on the Wear Behavior of Normally Oriented Fiber-Reinforced Polymer CompositesĀ© Tribology Transactions. 37: 23-32. DOI: 10.1080/10402009408983262 |
0.38 |
|
| 1993 |
Ovaert TC. On the Indentation of a Transversely Isotropic Half-Space With Application to Thin Solid Lubricant Films Journal of Tribology. 115: 650-657. DOI: 10.1115/1.2921689 |
0.405 |
|
| 1993 |
Ovaert TC, Wu J-. Theoretical estimates of asperity-scale stresses in normally-oriented continuous fiber-reinforced composites Tribology Transactions. 36: 120-126. DOI: 10.1080/10402009308983140 |
0.366 |
|
| 1991 |
Ovaert TC, Cheng HS. The Unlubricated Sliding Wear Behavior of Polyetheretherketone Against Smooth Mild-Steel Counterfaces Journal of Tribology-Transactions of the Asme. 113: 150-157. DOI: 10.1115/1.2920581 |
0.364 |
|
| 1991 |
Ovaert TC, Cheng HS. Counterface topographical effects on the wear of polyetheretherketone and a polyetheretherketone-carbon fiber composite Wear. 150: 275-287. DOI: 10.1016/0043-1648(91)90323-M |
0.307 |
|
| 1991 |
Nivatvongs K, Cheng H, Ovaert T, Wilson W. Influence of surface topography on low-speed asperity lubrication breakdown and scuffing Wear. 143: 137-148. DOI: 10.1016/0043-1648(91)90090-H |
0.344 |
|
| Show low-probability matches. |