☰

Natasha Vermaak, Ph.D. - Publications

Affiliations: 
2010 Materials University of California, Santa Barbara, Santa Barbara, CA, United States 
Area:
Materials Science Engineering
Tree Info Similar researchers PubMed Report error

28 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Quiel SE, Irwin CH, Naito CJ, Vermaak N. Mechanical Characterization of Normal and High-Strength Steel Bars in Reinforced Concrete Members under Fire Journal of Structural Engineering-Asce. 146: 4020110. DOI: 10.1061/(Asce)St.1943-541X.0002644  0.322
2020 Cinoglu IS, Charbal A, Vermaak N. Inelastic design for type 316L stainless steel at ambient and 600 °C under uniaxial loading International Journal of Pressure Vessels and Piping. 181: 104063. DOI: 10.1016/J.Ijpvp.2020.104063  0.4
2020 Zhang Z, Cinoglu IS, Charbal A, Vermaak N, Lou L, Zhang J. Cyclic inelastic behavior and shakedown response of a 2nd generation nickel-base single crystal superalloy under tension-torsion loadings: Experiments and simulations European Journal of Mechanics a-Solids. 80: 103895. DOI: 10.1016/J.Euromechsol.2019.103895  0.371
2020 Jia X, Grejtak T, Krick B, Vermaak N. Topology Optimization of Tribological Composites for Multifunctional Performance at Sliding Interfaces Composites Part B-Engineering. 199: 108209. DOI: 10.1016/J.Compositesb.2020.108209  0.452
2020 Grejtak T, Jia X, Cunniffe AR, Shi Y, Babuska TF, Pack RC, Vermaak N, Compton BG, Krick BA. Whisker orientation controls wear of 3D-printed epoxy nanocomposites Additive Manufacturing. 36: 101515. DOI: 10.1016/J.Addma.2020.101515  0.636
2019 Cinoglu IS, Begley MR, Deaton JD, Beran PS, McMeeking RM, Vermaak N. Elastoplastic design of beam structures subjected to cyclic thermomechanical loads Thin-Walled Structures. 136: 175-185. DOI: 10.1016/J.Tws.2018.12.024  0.355
2019 Grejtak T, Jia X, Feppon F, Joynson SG, Cunniffe AR, Shi Y, Kauffman DP, Vermaak N, Krick BA. Topology Optimization of Composite Materials for Wear: A Route to Multifunctional Materials for Sliding Interfaces Advanced Engineering Materials. 21: 1900366. DOI: 10.1002/Adem.201900366  0.401
2018 Jia X, Grejtak T, Krick B, Vermaak N. Experimentally Calibrated Abrasive Sliding Wear Model: Demonstrations for Rotary and Linear Wear Systems Journal of Applied Mechanics. 85. DOI: 10.1115/1.4041470  0.396
2018 Pan C, Charles J, Vermaak N, Romero C, Neti S, Zheng Y, Chen C, Bonner R. Experimental, numerical and analytic study of unconstrained melting in a vertical cylinder with a focus on mushy region effects International Journal of Heat and Mass Transfer. 124: 1015-1024. DOI: 10.1016/J.Ijheatmasstransfer.2018.04.009  0.326
2018 Pan C, Vermaak N, Romero C, Neti S, Hoenig S, Chen C, Bonner R. Cost estimation and sensitivity analysis of a latent thermal energy storage system for supplementary cooling of air cooled condensers Applied Energy. 224: 52-68. DOI: 10.1016/J.Apenergy.2018.04.080  0.347
2017 Jia X, Grejtak T, Krick B, Vermaak N. Design of composite systems for rotary wear applications Materials & Design. 134: 281-292. DOI: 10.1016/J.Matdes.2017.08.051  0.468
2017 Pan C, Hoenig S, Chen C, Neti S, Romero C, Vermaak N. Efficient modeling of phase change material solidification with multidimensional fins International Journal of Heat and Mass Transfer. 115: 897-909. DOI: 10.1016/J.Ijheatmasstransfer.2017.07.120  0.373
2017 Pan C, Vermaak N, Romero C, Neti S, Hoenig S, Chen C. Efficient optimization of a longitudinal finned heat pipe structure for a latent thermal energy storage system Energy Conversion and Management. 153: 93-105. DOI: 10.1016/J.Enconman.2017.09.064  0.365
2017 Faure A, Michailidis G, Parry G, Vermaak N, Estevez R. Design of thermoelastic multi-material structures with graded interfaces using topology optimization Structural and Multidisciplinary Optimization. 56: 823-837. DOI: 10.1007/S00158-017-1688-2  0.418
2016 Sidebottom MA, Feppon F, Vermaak N, Krick BA. Modeling Wear of Multimaterial Composite Surfaces Journal of Tribology. 138. DOI: 10.1115/1.4032823  0.38
2016 Feppon F, Sidebottom MA, Michailidis G, Krick BA, Vermaak N. Efficient Steady State Computation for Wear of Multimaterial Composites Journal of Tribology. 138. DOI: 10.1115/1.4031993  0.381
2016 Feppon F, Michailidis G, Sidebottom MA, Allaire G, Krick BA, Vermaak N. Introducing a level-set based shape and topology optimization method for the wear of composite materials with geometric constraints Structural and Multidisciplinary Optimization. 55: 547-568. DOI: 10.1007/S00158-016-1512-4  0.454
2014 Vermaak N, Michailidis G, Parry G, Estevez R, Allaire G, Bréchet Y. Material interface effects on the topology optimizationof multi-phase structures using a level set method Structural and Multidisciplinary Optimization. 50: 623-644. DOI: 10.1007/S00158-014-1074-2  0.39
2013 Begley MR, Zok F, Vermaak N. Failure and debonding of thin circular and square tiles (islands) bonded with a compliant interlayer Thin Solid Films. 531: 332-339. DOI: 10.1016/J.Tsf.2012.11.136  0.51
2013 Vermaak N, Mottura A, Pollock TM. Cyclic oxidation of high temperature coatings on new γ'-strengthened cobalt-based alloys Corrosion Science. 75: 300-308. DOI: 10.1016/J.Corsci.2013.06.013  0.618
2013 Vermaak N, Parry G, Estevez R, Bréchet Y. New insight into crack formation during corrosion of zirconium-based metal-oxide systems Acta Materialia. 61: 4374-4383. DOI: 10.1016/J.Actamat.2013.04.009  0.308
2012 Shanian A, Milani AS, Vermaak N, Bertoldi K, Scarinci T, Gerendas M. A Combined Finite Element-Multiple Criteria Optimization Approach for Materials Selection of Gas Turbine Components Journal of Applied Mechanics. 79. DOI: 10.1115/1.4006461  0.442
2011 Pérez-Bergquist SJ, Vermaak N, Pollock TM. High-temperature performance of actively cooled vapor phase strengthened nickel-based thermostructural panels Aiaa Journal. 49: 1080-1086. DOI: 10.2514/1.J050815  0.59
2011 Vermaak N, Valdevit L, Evans AG, Zok FW, Mcmeeking RM. Implications of shakedown for design of actively cooled thermostructural panels Journal of Mechanics of Materials and Structures. 6: 1313-1327. DOI: 10.2140/Jomms.2011.6.1313  0.555
2010 Vermaak N, Valdevit L, Evans AG. Influence of Configuration on Materials Selection for Actively Cooled Combustors Journal of Propulsion and Power. 26: 295-302. DOI: 10.2514/1.45417  0.434
2009 Vermaak N, Valdevit L, Evans AG. Materials property profiles for actively cooled panels: An illustration for scramjet applications Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 877-890. DOI: 10.1007/S11661-008-9768-Y  0.452
2008 Valdevit L, Vermaak N, Zok FW, Evans AG. A materials selection protocol for lightweight actively cooled panels Journal of Applied Mechanics, Transactions Asme. 75: 0610221-06102215. DOI: 10.1115/1.2966270  0.618
2006 Evans AG, Fleck NA, Faulhaber S, Vermaak N, Maloney M, Darolia R. Scaling laws governing the erosion and impact resistance of thermal barrier coatings Wear. 260: 886-894. DOI: 10.1016/J.Wear.2005.05.005  0.34
Show low-probability matches.