| Year |
Citation |
Score |
| 2019 |
Messner MC, Nassif O, Ma R, Truster TJ, Cochran K, Parks D, Sham T. Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: II. The effect of stress and temperature on engineering and microstructural properties Modelling and Simulation in Materials Science and Engineering. 27: 075010. DOI: 10.1088/1361-651X/Ab359F |
0.369 |
|
| 2019 |
Nassif O, Truster TJ, Ma R, Cochran KB, Parks DM, Messner MC, Sham T. Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: I. Theory and implementation Modelling and Simulation in Materials Science and Engineering. 27: 075009. DOI: 10.1088/1361-651X/Ab359C |
0.343 |
|
| 2018 |
Khalid Jawed M, Hadjiconstantinou NG, Parks D, Reis PM. Patterns of carbon nanotubes by flow directed deposition on substrates with architectured topographies. Nano Letters. PMID 29451801 DOI: 10.1021/Acs.Nanolett.7B04676 |
0.329 |
|
| 2017 |
Padhye N, Parks DM, Trout BL, Slocum AH. A New Phenomenon: Sub-Tg, Solid-State, Plasticity-Induced Bonding in Polymers. Scientific Reports. 7: 46405. PMID 28425498 DOI: 10.1038/Srep46405 |
0.365 |
|
| 2017 |
Karolak C, Montmitonnet P, Parks DM, Delattre G, Bouchard P. Analysis and modeling of the failure behavior of carbonitrided parts Procedia Engineering. 207: 2030-2035. DOI: 10.1016/J.Proeng.2017.10.1103 |
0.379 |
|
| 2016 |
Takaffoli M, Zhang T, Parks D, Zhao X. Mechanochemically Responsive Viscoelastic Elastomers Journal of Applied Mechanics. 83. DOI: 10.1115/1.4033431 |
0.342 |
|
| 2016 |
Kumar S, Parks DM. A comprehensive lattice-stability limit surface for graphene Journal of the Mechanics and Physics of Solids. 86: 19-41. DOI: 10.1016/J.Jmps.2015.09.011 |
0.335 |
|
| 2016 |
Lu W, Thouless MD, Hu Z, Wang H, Ghelichi R, Wu CH, Kamrin K, Parks D. CASL Structural Mechanics Modeling of Grid-to-Rod Fretting (GTRF) Jom. 1-8. DOI: 10.1007/S11837-016-2095-7 |
0.313 |
|
| 2015 |
Kumar S, Parks DM. Strain shielding from mechanically activated covalent bond formation during nanoindentation of graphene delays the onset of failure. Nano Letters. 15: 1503-10. PMID 25554829 DOI: 10.1021/Nl503641C |
0.409 |
|
| 2015 |
Kumar S, Parks DM. On the hyperelastic softening and elastic instabilities in graphene Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 471. DOI: 10.1098/Rspa.2014.0567 |
0.313 |
|
| 2013 |
Bouchard PO, Bernacki M, Parks DM. Analysis of stress intensity factors and T-stress to control crack propagation for kerf-less spalling of single crystal silicon foils Computational Materials Science. 69: 243-250. DOI: 10.1016/J.Commatsci.2012.10.033 |
0.38 |
|
| 2009 |
Veprek-Heijman MGJ, Veprek RG, Argon AS, Parks DM, Veprek S. Non-linear finite element constitutive modeling of indentation into super- and ultrahard materials: The plastic deformation of the diamond tip and the ratio of hardness to tensile yield strength of super- and ultrahard nanocomposites Surface and Coatings Technology. 203: 3385-3391. DOI: 10.1016/J.Surfcoat.2009.04.028 |
0.596 |
|
| 2008 |
Argon AS, Bartczak Z, Cohen RE, Galeski A, Lee BJ, Parks DM. Deformation Induced Texture Development in Polyethylene: Computer Simulation and Experiments Oriented Polymer Materials. 265-301. DOI: 10.1002/9783527615056.ch9 |
0.465 |
|
| 2007 |
Kalra A, Parks DM, Rutledge GC. Molecular simulation of strain dependence of vibrational frequencies for montmorillonite clay and analysis of strain transfer in a polymer-clay nanocomposite Macromolecules. 40: 140-144. DOI: 10.1021/Ma062144P |
0.361 |
|
| 2007 |
Veprek RG, Parks DM, Argon AS, Veprek S. Erratum to “Non-linear finite element constitutive modeling of mechanical properties of hard and superhard materials studied by indentation” [Mater. Sci. Eng. A 422 (2006) 205–217] Materials Science and Engineering: A. 448: 366-378. DOI: 10.1016/J.Msea.2006.11.065 |
0.586 |
|
| 2007 |
Danielsson M, Parks DM, Boyce MC. Micromechanics, macromechanics and constitutive modeling of the elasto-viscoplastic deformation of rubber-toughened glassy polymers Journal of the Mechanics and Physics of Solids. 55: 533-561. DOI: 10.1016/J.Jmps.2006.08.006 |
0.646 |
|
| 2006 |
Veprek RG, Parks DM, Argon AS, Veprek S. Non-linear finite element constitutive modeling of mechanical properties of hard and superhard materials studied by indentation Materials Science and Engineering A. 422: 205-217. DOI: 10.1016/J.Msea.2006.02.020 |
0.585 |
|
| 2006 |
Vernerey FJ, McVeigh C, Liu WK, Moran B, Tewari D, Parks DM, Olson GB. The 3-D computational modeling of shear-dominated ductile failure in steel Jom. 58: 45-51. DOI: 10.1007/Bf02748495 |
0.356 |
|
| 2005 |
Parsons EM, Boyce MC, Parks DM, Weinberg M. Three-dimensional large-strain tensile deformation of neat and calcium carbonate-filled high-density polyethylene Polymer. 46: 2257-2265. DOI: 10.1016/J.Polymer.2005.01.045 |
0.597 |
|
| 2004 |
Pantano A, Boyce MC, Parks DM. Mechanics of axial compression of single and multi-wall carbon nanotubes Journal of Engineering Materials and Technology, Transactions of the Asme. 126: 279-284. DOI: 10.1115/1.1752926 |
0.568 |
|
| 2004 |
Pantano A, Parks DM, Boyce MC, Nardelli MB. Mixed finite element-tight-binding electromechanical analysis of carbon nanotubes Journal of Applied Physics. 96: 6756-6760. DOI: 10.1063/1.1809252 |
0.556 |
|
| 2004 |
Danielsson M, Parks DM, Boyce MC. Constitutive modeling of porous hyperelastic materials Mechanics of Materials. 36: 347-358. DOI: 10.1016/S0167-6636(03)00064-4 |
0.628 |
|
| 2004 |
Parsons E, Boyce MC, Parks DM. An experimental investigation of the large-strain tensile behavior of neat and rubber-toughened polycarbonate Polymer. 45: 2665-2684. DOI: 10.1016/J.Polymer.2004.01.068 |
0.588 |
|
| 2004 |
Sheng N, Boyce MC, Parks DM, Rutledge GC, Abes JI, Cohen RE. Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle Polymer. 45: 487-506. DOI: 10.1016/J.Polymer.2003.10.100 |
0.571 |
|
| 2004 |
Arsenlis A, Parks DM, Becker R, Bulatov VV. On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals Journal of the Mechanics and Physics of Solids. 52: 1213-1246. DOI: 10.1016/J.Jmps.2003.12.007 |
0.375 |
|
| 2004 |
Pantano A, Parks DM, Boyce MC. Mechanics of deformation of single- and multi-wall carbon nanotubes Journal of the Mechanics and Physics of Solids. 52: 789-821. DOI: 10.1016/J.Jmps.2003.08.004 |
0.593 |
|
| 2003 |
Pantano A, Boyce MC, Parks DM. Nonlinear structural mechanics based modeling of carbon nanotube deformation. Physical Review Letters. 91: 145504. PMID 14611536 DOI: 10.1103/Physrevlett.91.145504 |
0.571 |
|
| 2003 |
Van Dommelen JAW, Parks DM, Boyce MC, Brekelmans WAM, Baaijens FPT. Micromechanical modeling of intraspherulitic deformation of semicrystalline polymers Polymer. 44: 6089-6101. DOI: 10.1016/S0032-3861(03)00558-5 |
0.663 |
|
| 2003 |
Van Dommelen JAW, Parks DM, Boyce MC, Brekelmans WAM, Baaijens FPT. Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers Journal of the Mechanics and Physics of Solids. 51: 519-541. DOI: 10.1016/S0022-5096(02)00063-7 |
0.654 |
|
| 2002 |
Hrousis CA, Wiggs BJ, Drazen JM, Parks DM, Kamm RD. Mucosal folding in biologic vessels. Journal of Biomechanical Engineering. 124: 334-41. PMID 12188199 DOI: 10.1115/1.1489450 |
0.341 |
|
| 2002 |
Lee BJ, Ahzi S, Parks DM. Bicrystal-based modeling of plasticity in FCC metals Journal of Engineering Materials and Technology, Transactions of the Asme. 124: 27-40. DOI: 10.1115/1.1420196 |
0.452 |
|
| 2002 |
Evers LP, Parks DM, Brekelmans WAM, Geers MGD. Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation Journal of the Mechanics and Physics of Solids. 50: 2403-2424. DOI: 10.1016/S0022-5096(02)00032-7 |
0.41 |
|
| 2002 |
Arsenlis A, Parks DM. Modeling the evolution of crystallographic dislocation density in crystal plasticity Journal of the Mechanics and Physics of Solids. 50: 1979-2009. DOI: 10.1016/S0022-5096(01)00134-X |
0.415 |
|
| 2002 |
Danielsson M, Parks DM, Boyce MC. Three-dimensional micromechanical modeling of voided polymeric materials Journal of the Mechanics and Physics of Solids. 50: 351-379. DOI: 10.1016/S0022-5096(01)00060-6 |
0.653 |
|
| 2002 |
Xia QS, Boyce MC, Parks DM. A constitutive model for the anisotropic elastic-plastic deformation of paper and paperboard International Journal of Solids and Structures. 39: 4053-4071. DOI: 10.1016/S0020-7683(02)00238-X |
0.638 |
|
| 2001 |
Ishikawa N, Parks DM, Kurihara M. Micromechanical modeling of ductile crack initiation behavior of two phase steels Isij International. 41: 76-85. DOI: 10.2355/Isijinternational.41.76 |
0.445 |
|
| 2000 |
Ishikawa N, Parks DM, Kurihara M. Micromechanism of ductile crack initiation in structural steels based on void nucleation and growth Isij International. 40: 519-527. DOI: 10.2355/Isijinternational.40.519 |
0.47 |
|
| 2000 |
Ishikawa N, Parks DM, Socrate S, Kurihara M. Micromechanical modeling of ferrite-pearlite steels using finite element unit cell models Isij International. 40: 1170-1179. DOI: 10.2355/Isijinternational.40.1170 |
0.391 |
|
| 2000 |
Lambert Diani J, Parks DM. Problem of an inclusion in an infinite body, approach in large deformation Mechanics of Materials. 32: 43-55. DOI: 10.1016/S0167-6636(99)00015-0 |
0.444 |
|
| 2000 |
Tzika PA, Boyce MC, Parks DM. Micromechanics of deformation in particle-toughened polyamides Journal of the Mechanics and Physics of Solids. 48: 1893-1929. DOI: 10.1016/S0022-5096(99)00096-4 |
0.616 |
|
| 2000 |
Rajaram H, Socrate S, Parks DM. Application of domain integral methods using tetrahedral elements to the determination of stress intensity factors Engineering Fracture Mechanics. 66: 455-482. DOI: 10.1016/S0013-7944(00)00025-4 |
0.379 |
|
| 1998 |
Diani JM, Parks DM. Effects of strain state on the kinetics of strain-induced martensite in steels Journal of the Mechanics and Physics of Solids. 46: 1613-1635. DOI: 10.1016/S0022-5096(98)00001-5 |
0.421 |
|
| 1998 |
Lee H, Parks DM. Line-spring finite element for fully plastic crack growth - II. Surface-cracked plates and pipes International Journal of Solids and Structures. 35: 5139-5158. DOI: 10.1016/S0020-7683(97)00247-3 |
0.402 |
|
| 1998 |
Lee H, Parks DM. Line-spring finite element for fully plastic crack growth - I. Formulation and one-dimensional results International Journal of Solids and Structures. 35: 5115-5138. DOI: 10.1016/S0020-7683(97)00246-1 |
0.439 |
|
| 1997 |
Argon AS, Cornie JA, Gupta V, Lev L, Parks DM. Response to the comments of nutt and king on the bond strength measurements of gupta et al Materials Science and Engineering A. 237: 224-228. DOI: 10.1016/S0921-5093(97)00418-8 |
0.495 |
|
| 1996 |
Kim Y, McClintock FA, Parks DM. Yield Locus in Deep, Single-Face-Cracked Specimens Under Combined Bending and Tension Journal of Applied Mechanics. 63: 1045-1047. DOI: 10.1115/1.2787229 |
0.376 |
|
| 1995 |
Parks DM, Ganti S, McClintock FA, Epstein JS, Lloyd LR, Reuter WG. Experiments and analyses on undermatched interleaf specimens in bending Astm Special Technical Publication. 391-416. DOI: 10.1520/Stp16397S |
0.459 |
|
| 1995 |
McClintock FA, Kim YJ, Parks DM. Tests and analyses for fully plastic fracture mechanics of plane strain mode I crack growth Astm Special Technical Publication. 199-222. DOI: 10.1520/Stp16385S |
0.441 |
|
| 1995 |
Wang Y, Parks DM. Limits of J-T Characterization of Elastic—Plastic Crack—Tip Fields Astm Special Technical Publications. 43-67. DOI: 10.1520/Stp14630S |
0.445 |
|
| 1995 |
Hauf DE, Parks DM, Lee H. A modified effective crack-length formulation in elastic-plastic fracture mechanics Mechanics of Materials. 20: 273-289. DOI: 10.1016/0167-6636(94)00058-1 |
0.433 |
|
| 1995 |
Lee H, Parks DM. Enhanced elastic-plastic line-spring finite element International Journal of Solids and Structures. 32: 2393-2418. DOI: 10.1016/0020-7683(94)00187-2 |
0.452 |
|
| 1995 |
McClintock FA, Kim YJ, Parks DM. A criterion for plane strain, fully plastic, quasi-steady crack growth International Journal of Fracture. 72: 197-221. DOI: 10.1007/Bf00037311 |
0.446 |
|
| 1994 |
Quigley CJ, Parks DM. The finite deformation field surrounding a mode I plane strain crack in a hyperelastic incompressible material under small-scale nonlinearity International Journal of Fracture. 65: 75-96. DOI: 10.1007/BF00017144 |
0.334 |
|
| 1993 |
Socrate S, Parks DM. Numerical determination of the elastic driving force for directional coarsening in Ni-superalloys Acta Metallurgica Et Materialia. 41: 2185-2209. DOI: 10.1016/0956-7151(93)90389-A |
0.41 |
|
| 1993 |
Hsia KJ, Argon AS, Parks DM. Effects of grain boundary sliding ... Mech. Mater. 11, 43-62 and Modeling of creep damage evolution ... Mech. Mater. 11, 19-42 Mechanics of Materials. 14: 313-315. DOI: 10.1016/0167-6636(93)90086-7 |
0.522 |
|
| 1993 |
Ahzi S, Asaro RJ, Parks DM. Application of crystal plasticity theory for mechanically processed BSCCO superconductors Mechanics of Materials. 15: 201-222. DOI: 10.1016/0167-6636(93)90018-M |
0.456 |
|
| 1993 |
Lee BJ, Argon AS, Parks DM, Ahzi S, Bartczak Z. Simulation of large strain plastic deformation and texture evolution in high density polyethylene Polymer. 34: 3555-3575. DOI: 10.1016/0032-3861(93)90039-D |
0.601 |
|
| 1993 |
Lee BJ, Parks DM, Ahzi S. Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers Journal of the Mechanics and Physics of Solids. 41: 1651-1687. DOI: 10.1016/0022-5096(93)90018-B |
0.47 |
|
| 1993 |
Lee H, Parks DM. Fully plastic analyses of plane strain single-edge-cracked specimens subject to combined tension and bending International Journal of Fracture. 63: 329-349. DOI: 10.1007/Bf00013042 |
0.395 |
|
| 1993 |
Zywicz E, Parks DM. Elastic-plastic analysis of frictionless contact at interfacial crack tips International Journal of Fracture. 42: 129-143. DOI: 10.1007/978-94-017-2444-9_9 |
0.445 |
|
| 1992 |
Hsia KJ, Argon AS, Parks DM. Dominant creep failure process in tensile components Journal of Engineering Materials and Technology, Transactions of the Asme. 114: 255-264. DOI: 10.1115/1.2904170 |
0.532 |
|
| 1992 |
Stringfellow RG, Parks DM, Olson GB. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels Acta Metallurgica Et Materialia. 40: 1703-1716. DOI: 10.1016/0956-7151(92)90114-T |
0.424 |
|
| 1992 |
Gupta V, Argon AS, Parks DM, Cornie JA. Measurement of interface strength by a laser spallation technique Journal of the Mechanics and Physics of Solids. 40: 141-180. DOI: 10.1016/0022-5096(92)90296-E |
0.483 |
|
| 1992 |
Zywicz E, Parks DM. Small-scale yielding interfacial crack-tip fields Journal of the Mechanics and Physics of Solids. 40: 511-536. DOI: 10.1016/0022-5096(92)80002-8 |
0.449 |
|
| 1992 |
Toshio N, Parks DM. Determination of elastic T-stress along three-dimensional crack fronts using an interaction integral International Journal of Solids and Structures. 29: 1597-1611. DOI: 10.1016/0020-7683(92)90011-H |
0.386 |
|
| 1992 |
Wang YY, Parks DM. Evaluation of the elastic T-stress in surface-cracked plates using the line-spring method International Journal of Fracture. 56: 25-40. DOI: 10.1007/Bf00042429 |
0.411 |
|
| 1991 |
Wang YY, Parks DM, Lloyd WR, Reuter WG, Epstein J. Elastic-plastic deformation in surface-cracked plates. Experiment and numerical analysis Journal of Applied Mechanics, Transactions Asme. 58: 895-903. DOI: 10.1115/1.2897703 |
0.432 |
|
| 1991 |
Stringfellow RG, Parks DM. A self-consistent model of isotropic viscoplastic behavior in multiphase materials International Journal of Plasticity. 7: 529-547. DOI: 10.1016/0749-6419(91)90043-X |
0.366 |
|
| 1991 |
Hsia KJ, Parks DM, Argon AS. Effects of grain boundary sliding on creep-constrained boundary cavitation and creep deformation Mechanics of Materials. 11: 43-62. DOI: 10.1016/0167-6636(91)90038-2 |
0.583 |
|
| 1991 |
Hsia KJ, Argon AS, Parks DM. Modeling of creep damage evolution around blunt notches and sharp cracks Mechanics of Materials. 11: 19-42. DOI: 10.1016/0167-6636(91)90037-Z |
0.589 |
|
| 1991 |
Ozmat B, Argon AS, Parks DM. Growth modes of cracks in creeping type 304 stainless steel Mechanics of Materials. 11: 1-17. DOI: 10.1016/0167-6636(91)90036-Y |
0.544 |
|
| 1991 |
Wang YY, Parks DM, Lloyd WR, Reuter WG, Epstein J. Elastic-plastic deformation in surface-cracked plates: experiment and numerical analysis American Society of Mechanical Engineers (Paper). 1-9. |
0.324 |
|
| 1990 |
Sohn DS, Kohse GE, Parks DM, Harling OK. Yield stress determination by the Massachusetts Institute of Technology miniaturized disk bend test Nuclear Technology. 92: 383-388. DOI: 10.13182/Nt90-A16239 |
0.379 |
|
| 1990 |
Gupta V, Argon AS, Cornie JA, Parks DM. Measurement of interface strength by laser-pulse-induced spallation Materials Science and Engineering A. 126: 105-117. DOI: 10.1016/0921-5093(90)90116-K |
0.476 |
|
| 1990 |
Nakamura T, Parks DM. Three-dimensional crack front fields in a thin ductile plate Journal of the Mechanics and Physics of Solids. 38: 787-812. DOI: 10.1016/0022-5096(90)90040-B |
0.47 |
|
| 1990 |
Parks DM, Ahzi S. Polycrystalline plastic deformation and texture evolution for crystals lacking five independent slip systems Journal of the Mechanics and Physics of Solids. 38: 701-724. DOI: 10.1016/0022-5096(90)90029-4 |
0.384 |
|
| 1990 |
Ahzi S, Parks DM, Argon AS. Modeling of plastic deformation evolution of anisotropy in Semi-Crystalline Polymers American Society of Mechanical Engineers, Materials Division (Publication) Md. 20: 287-292. |
0.53 |
|
| 1989 |
Zywicz E, Parks DM. Elastic yield zone around an interfacial crack tip Journal of Applied Mechanics, Transactions Asme. 56: 577-584. DOI: 10.1115/1.3176130 |
0.421 |
|
| 1989 |
Boyce MC, Parks DM, Argon AS. Plastic flow in oriented glassy polymers International Journal of Plasticity. 5: 593-615. DOI: 10.1016/0749-6419(89)90003-X |
0.675 |
|
| 1989 |
Boyce MC, Weber GG, Parks DM. On the kinematics of finite strain plasticity Journal of the Mechanics and Physics of Solids. 37: 647-665. DOI: 10.1016/0022-5096(89)90033-1 |
0.646 |
|
| 1989 |
Nakamura T, Parks DM. Antisymmetrical 3-D stress field near the crack front of a thin elastic plate International Journal of Solids and Structures. 25: 1411-1426. DOI: 10.1016/0020-7683(89)90109-1 |
0.4 |
|
| 1989 |
Shawki TG, Nakamura T, Parks DM. Line-spring analysis of surface flawed plates and shells using deformation theory International Journal of Fracture. 41: 23-38. DOI: 10.1007/Bf00014835 |
0.456 |
|
| 1988 |
Nakamura T, Parks DM. Three-dimensional stress field near the crack front of a thin elastic plate American Society of Mechanical Engineers (Paper). WA/APM56 9. DOI: 10.1115/1.3173725 |
0.389 |
|
| 1988 |
Rodin GJ, Parks DM. A self-consistent analysis of a creeping matrix with aligned cracks Journal of the Mechanics and Physics of Solids. 36: 237-249. DOI: 10.1016/S0022-5096(98)90006-0 |
0.358 |
|
| 1988 |
Zywicz E, Parks DM. Thermo-viscoplastic residual stresses in metal matrix composites Composites Science and Technology. 33: 295-315. DOI: 10.1016/0266-3538(88)90045-0 |
0.314 |
|
| 1988 |
Boyce MC, Parks DM, Argon AS. Large inelastic deformation of glassy polymers. Part II: numerical simulation of hydrostatic extrusion Mechanics of Materials. 7: 35-47. DOI: 10.1016/0167-6636(88)90004-X |
0.686 |
|
| 1988 |
Boyce MC, Parks DM, Argon AS. Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model Mechanics of Materials. 7: 15-33. DOI: 10.1016/0167-6636(88)90003-8 |
0.711 |
|
| 1988 |
Boyce MC, Parks DM, Argon AS. Computational modelling of large strain plastic deformation in glassy polymers American Chemical Society, Polymer Preprints, Division of Polymer Chemistry. 29: 163-164. |
0.541 |
|
| 1987 |
Boyce ME, Argon AS, Parks DM. Mechanical properties of compliant composite particles effective in toughening glassy polymers Polymer. 28: 1680-1694. DOI: 10.1016/0032-3861(87)90011-5 |
0.533 |
|
| 1987 |
Parks DM. Mechanics and mechanisms of creep deformation and damage Nuclear Engineering and Design. 105: 11-18. DOI: 10.1016/0029-5493(87)90224-X |
0.456 |
|
| 1986 |
Parks DM. MODE II LOADING OF A CRACKED STRIP Journal of Applied Mechanics, Transactions Asme. 53: 954-955. DOI: 10.1115/1.3171889 |
0.311 |
|
| 1986 |
Rodin GJ, Parks DM. ON CONSISTENCY RELATIONS IN NONLINEAR FRACTURE MECHANICS Journal of Applied Mechanics, Transactions Asme. 53: 834-838. DOI: 10.1115/1.3171867 |
0.375 |
|
| 1986 |
Rodin GJ, Parks DM. Constitutive models of a power-law matrix containing aligned penny-shaped cracks Mechanics of Materials. 5: 221-228. DOI: 10.1016/0167-6636(86)90019-0 |
0.417 |
|
| 1986 |
Marchand N, Parks DM, Pelloux RM. KI-solutions for single edge notch specimens under fixed end displacements International Journal of Fracture. 31: 53-65. DOI: 10.1007/Bf00033929 |
0.35 |
|
| 1984 |
McClintock FA, Parks DM, Holmes JW, Bain KR. Drop in kI due to load shift in single-edge-notch tests with compliant drawbars Engineering Fracture Mechanics. 20: 159-167. DOI: 10.1016/0013-7944(84)90123-1 |
0.333 |
|
| 1980 |
Freund L, Parks D. Analytical interpretation of running ductile fracture experiments in gas-pressurized linepipe Astm Special Technical Publications. 359-378. DOI: 10.1520/Stp27457S |
0.38 |
|
| 1979 |
McMeeking R, Parks D. On criteria for J-dominance of crack-tip fields in large-scale yielding Astm Special Technical Publications. 175-194. DOI: 10.1520/Stp35830S |
0.59 |
|
| 1979 |
Rice JR, McMeeking RM, Parks DM, Sorensen EP. Recent finite element studies in plasticity and fracture mechanics Computer Methods in Applied Mechanics and Engineering. 17: 411-442. DOI: 10.1016/0045-7825(79)90026-4 |
0.65 |
|
| Show low-probability matches. |
