Year |
Citation |
Score |
2024 |
Hu Y, Lin D, Song M, Wu D, Zhang Y, Li G, Luo H. Sex and race differences in the association of albumin with cognitive function in older adults. Brain and Behavior. 14: e3435. PMID 38409895 DOI: 10.1002/brb3.3435 |
0.301 |
|
2023 |
Hu Y, Song M, Wu D, Zhang Y, Li G, Luo H. The association between HDL-C and stroke in the middle-aged and elderly: A cross-sectional study. Brain and Behavior. e2901. PMID 36749609 DOI: 10.1002/brb3.2901 |
0.313 |
|
2021 |
Wang H, Chen D, An X, Zhang Y, Sun S, Tian Y, Zhang Z, Wang A, Liu J, Song M, Ringer SP, Zhu T, Liao X. Deformation-induced crystalline-to-amorphous phase transformation in a CrMnFeCoNi high-entropy alloy. Science Advances. 7. PMID 33789894 DOI: 10.1126/sciadv.abe3105 |
0.33 |
|
2021 |
Hasan MN, Gu J, Jiang S, Wang HJ, Cabral M, Ni S, An XH, Song M, Shen LM, Liao XZ. Effects of elemental segregation on microstructural evolution and local mechanical properties in a dynamically deformed CrMnFeCoNi high entropy alloy Scripta Materialia. 190: 80-85. DOI: 10.1016/J.Scriptamat.2020.08.048 |
0.426 |
|
2021 |
Gao L, Li K, Ni S, Du Y, Song M. The growth mechanisms of θ′ precipitate phase in an Al-Cu alloy during aging treatment Journal of Materials Science & Technology. 61: 25-32. DOI: 10.1016/J.Jmst.2020.05.046 |
0.385 |
|
2020 |
Yan H, Wu Q, Chen J, Xia W, Song M, Su B, Wu J. Microstructure evolution and mechanical properties of the ZM61 alloy sheets under different pre-rolling and high strain rate rolling temperatures Journal of Materials Research. 35: 1817-1824. DOI: 10.1557/Jmr.2020.158 |
0.426 |
|
2020 |
Cao Y, Zhang W, Liu B, Song M, Liu Y. Extraordinary tensile properties of titanium alloy with heterogeneous phase-distribution based on hetero-deformation induced hardening Materials Research Letters. 8: 254-260. DOI: 10.1080/21663831.2020.1745919 |
0.396 |
|
2020 |
Gong Y, Gao L, Li K, Du Y, Song M. Structural instability of plate-shaped θ’ precipitates in an aged Al-Cu alloy Philosophical Magazine Letters. 1-9. DOI: 10.1080/09500839.2020.1810861 |
0.379 |
|
2020 |
Cheng B, Gu J, Song M. An investigation of the microstructural evolution and tensile properties of a nickel-based GH648 superalloy manufactured through selective laser melting Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 790: 139704. DOI: 10.1016/J.Msea.2020.139704 |
0.409 |
|
2020 |
Li X, Xia W, Yan H, Chen J, Su B, Song M, Li Z, Lu Y. High strength and large ductility of a fine-grained Al–Mg alloy processed by high strain rate hot rolling and cold rolling Materials Science and Engineering: A. 787: 139481. DOI: 10.1016/J.Msea.2020.139481 |
0.443 |
|
2020 |
Xie Z, Dai Y, Ou X, Ni S, Song M. Effects of selective laser melting build orientations on the microstructure and tensile performance of Ti–6Al–4V alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 776: 139001. DOI: 10.1016/J.Msea.2020.139001 |
0.403 |
|
2020 |
Yang M, Chen H, Orekhov A, Lu Q, Lan X, Li K, Zhang S, Song M, Kong Y, Schryvers D, Du Y. Quantified contribution of β″ and β′ precipitates to the strengthening of an aged Al–Mg–Si alloy Materials Science and Engineering: A. 774: 138776. DOI: 10.1016/J.Msea.2019.138776 |
0.392 |
|
2020 |
Yu L, Yan H, Chen J, Xia W, Su B, Song M. Effects of solid solution elements on damping capacities of binary magnesium alloys Materials Science and Engineering: A. 772: 138707. DOI: 10.1016/J.Msea.2019.138707 |
0.4 |
|
2020 |
Yu S, Luo K, Ni S, Song M. Deformation mechanism of pure hafnium under high speed compression Materials Characterization. 110639. DOI: 10.1016/J.Matchar.2020.110639 |
0.354 |
|
2020 |
An X, Li Y, Ni S, Wang Z, Song M. Grain refinement process in a cold-rolled polycrystalline cobalt Materials Characterization. 164: 110360. DOI: 10.1016/J.Matchar.2020.110360 |
0.407 |
|
2020 |
Wang Z, Guo L, Xia W, Yuan Z, Cao Y, Ni S, Song M. An SEM-based approach to characterize the microstructural evolution in a gradient CoCrFeNiMo0.15 high-entropy alloy Materials Characterization. 161: 110169. DOI: 10.1016/J.Matchar.2020.110169 |
0.393 |
|
2020 |
Guo X, Baker I, Kennedy FE, Song M. A comparison of the dry sliding wear behavior of NiCoCr medium entropy alloy with 316 stainless steel Materials Characterization. 160: 110132. DOI: 10.1016/J.Matchar.2020.110132 |
0.425 |
|
2020 |
Wu Q, Yan H, Chen J, Xia W, Song M, Su B. The interactions between dynamic precipitates and dynamic recrystallization in Mg-5Zn-1Mn alloys during hot compression Materials Characterization. 160: 110131. DOI: 10.1016/J.Matchar.2020.110131 |
0.414 |
|
2020 |
Huang X, Gong X, Song M, Chen J, Hu F, Yin Y, Xiao J, Wang H, Wang H, Gong H, Deng Y, Pang B, Li Y. Liquid metal embrittlement susceptibility of a high-entropy alloy exposed to oxygen-depleted liquid lead-bismuth eutectic at 250 and 350 °C Journal of Nuclear Materials. 528: 151859. DOI: 10.1016/J.Jnucmat.2019.151859 |
0.406 |
|
2020 |
Wei B, Ni S, Liu Y, Liao X, Song M. Phase transformation and structural evolution in a Ti-5at.% Al alloy induced by cold-rolling Journal of Materials Science & Technology. 49: 211-223. DOI: 10.1016/J.Jmst.2020.02.032 |
0.388 |
|
2020 |
Lu Q, Li K, Chen H, Yang M, Lan X, Yang T, Liu S, Song M, Cao L, Du Y. Simultaneously enhanced strength and ductility of 6xxx Al alloys via manipulating meso-scale and nano-scale structures guided with phase equilibrium Journal of Materials Science & Technology. 41: 139-148. DOI: 10.1016/J.Jmst.2019.09.029 |
0.475 |
|
2020 |
An X, Zhang H, Ni S, Ou X, Liao X, Song M. Effects of temperature and alloying content on the phase transformation and {101¯1} twinning in Zr during rolling Journal of Materials Science & Technology. 41: 76-80. DOI: 10.1016/J.Jmst.2019.09.022 |
0.424 |
|
2020 |
Wang A, An X, Gu J, Wang X, Li L, Li W, Song M, Duan Q, Zhang Z, Liao X. Effect of grain size on fatigue cracking at twin boundaries in a CoCrFeMnNi high-entropy alloy Journal of Materials Science & Technology. 39: 1-6. DOI: 10.1016/J.Jmst.2019.09.010 |
0.306 |
|
2020 |
Zhao L, Yan H, Chen J, Xia W, Su B, Song M, Li Z, Li X, Liao Y. High ductility and strong work-hardening behavior of Zn modified as-hot-rolled Al–Mg sheets Journal of Alloys and Compounds. 157079. DOI: 10.1016/J.Jallcom.2020.157079 |
0.418 |
|
2020 |
Guo L, Wu W, Ni S, Yuan Z, Cao Y, Wang Z, Song M. Strengthening the FeCoCrNiMo0.15 high entropy alloy by a gradient structure Journal of Alloys and Compounds. 841: 155688. DOI: 10.1016/J.Jallcom.2020.155688 |
0.43 |
|
2020 |
Zhou X, Yan H, Chen J, Xia W, Su B, Yu L, Huang W, Song M. Effects of low temperature aging precipitates on damping and mechanical properties of ZK60 magnesium alloy Journal of Alloys and Compounds. 819: 152961. DOI: 10.1016/J.Jallcom.2019.152961 |
0.437 |
|
2020 |
Wang Z, Gu J, An D, Liu Y, Song M. Characterization of the microstructure and deformation substructure evolution in a hierarchal high-entropy alloy by correlative EBSD and ECCI Intermetallics. 121: 106788. DOI: 10.1016/J.Intermet.2020.106788 |
0.413 |
|
2020 |
Lu Q, Guo B, Ni S, Yi J, Song M. Preparation, microstructure and properties of Cu-8.3Al/CNTs composites with different volume fractions of CNTs Diamond and Related Materials. 107: 107912. DOI: 10.1016/J.Diamond.2020.107912 |
0.379 |
|
2020 |
Zhang H, Ou X, Wei B, Ni S, Song M. Strain direction dependency of deformation mechanisms in an HCP-Ti crystalline by molecular dynamics simulations Computational Materials Science. 172: 109328. DOI: 10.1016/J.Commatsci.2019.109328 |
0.379 |
|
2020 |
Guo B, Chen Y, Wang Z, Yi J, Ni S, Du Y, Li W, Song M. Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites Carbon. 159: 201-212. DOI: 10.1016/J.Carbon.2019.12.038 |
0.377 |
|
2020 |
Wu H, Liang L, Lan X, Yin Y, Song M, Li R, Liu Y, Yang H, Liu L, Cai A, Li Q, Huang W. Tribological and biological behaviors of laser cladded Ti-based metallic glass composite coatings Applied Surface Science. 507: 145104. DOI: 10.1016/J.Apsusc.2019.145104 |
0.306 |
|
2020 |
Song M, Zhou R, Gu J, Wang Z, Ni S, Liu Y. Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy Applied Materials Today. 18: 100498. DOI: 10.1016/J.Apmt.2019.100498 |
0.44 |
|
2020 |
An X, Wang Z, Ni S, Song M. The tension-compression asymmetry of martensite phase transformation in a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy Science China. Materials. 63: 1797-1807. DOI: 10.1007/S40843-020-1319-3 |
0.384 |
|
2020 |
Guo L, Gu J, Gong X, Ni S, Song M. CALPHAD-aided design of high entropy alloy to achieve high strength via precipitate strengthening Science China. Materials. 63: 288-299. DOI: 10.1007/S40843-019-1170-7 |
0.468 |
|
2020 |
Li Z, Yan H, Chen J, Xia W, Su B, Zhao L, Song M. Effect of Mg Content on the Damping Behavior of Al–Mg Alloys Metals and Materials International. 1-9. DOI: 10.1007/S12540-020-00695-9 |
0.313 |
|
2020 |
Wang F, Gong Y, Du Y, Song M. Microstructures and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed by Two-Step Aging Treatment Journal of Materials Engineering and Performance. 29: 4404-4411. DOI: 10.1007/S11665-020-04980-X |
0.44 |
|
2019 |
Gong Y, Gu J, Ni S, Wu H, Song M. A good combination of strength and ductility of ultra-coarse-grained Cu-Al alloy with coarse-grained surface layer via pre-torsional treatment. Micron (Oxford, England : 1993). 129: 102783. PMID 31770703 DOI: 10.1016/J.Micron.2019.102783 |
0.444 |
|
2019 |
Guo L, Gu J, Gong X, Li K, Ni S, Liu Y, Song M. Short-range ordering induced serrated flow in a carbon contained FeCoCrNiMn high entropy alloy. Micron (Oxford, England : 1993). 126: 102739. PMID 31472329 DOI: 10.1016/J.Micron.2019.102739 |
0.376 |
|
2019 |
Dai Y, Song M. Microstructural Evolution and Phase Transformation of a Ti-5Nb-5Al Alloy During Annealing Treatment Materials Research-Ibero-American Journal of Materials. 22. DOI: 10.1590/1980-5373-Mr-2019-0507 |
0.411 |
|
2019 |
Gu J, Ni S, Song M. Mechanical Properties and Microstructural Evolution of CuZn Alloys via Pre-Torsional Deformation Materials Research-Ibero-American Journal of Materials. 22. DOI: 10.1590/1980-5373-Mr-2018-0424 |
0.45 |
|
2019 |
An X, Ni S, Song M. A new double twinning mode in a cold-rolled Zr alloy Philosophical Magazine Letters. 99: 21-28. DOI: 10.1080/09500839.2019.1612107 |
0.347 |
|
2019 |
Li Y, Ni S, Liu Y, Song M. Phase transition induced high strength and large ductility of a hot rolled near β Ti-5Al-5Mo-5V-1Cr-1Fe alloy Scripta Materialia. 170: 34-37. DOI: 10.1016/J.Scriptamat.2019.05.031 |
0.401 |
|
2019 |
Jiang J, Ni S, Yan H, Yan N, Song M. ⟨c + a⟩ dislocations shearing (0001)α plate precipitates in an Mg-Zn-Mn alloy Scripta Materialia. 170: 24-28. DOI: 10.1016/J.Scriptamat.2019.05.022 |
0.415 |
|
2019 |
Gu J, Song M. Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy Scripta Materialia. 162: 345-349. DOI: 10.1016/J.Scriptamat.2018.11.042 |
0.438 |
|
2019 |
Wei B, Ni S, Liu Y, Song M. Stress accommodation by α to α″ transformation at the {101¯1} twin boundary in a cold-rolled Ti-5at.% Al alloy Materialia. 8: 100469. DOI: 10.1016/J.Mtla.2019.100469 |
0.378 |
|
2019 |
Gao L, Ou X, Ni S, Li K, Du Y, Song M. Effects of θ′ precipitates on the mechanical performance and fracture behavior of an Al–Cu alloy subjected to overaged condition Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 762: 138091. DOI: 10.1016/J.Msea.2019.138091 |
0.447 |
|
2019 |
Wu W, Guo L, Guo B, Liu Y, Song M. Altered microstructural evolution and mechanical properties of CoCrFeNiMo0.15 high-entropy alloy by cryogenic rolling Materials Science and Engineering: A. 759: 574-582. DOI: 10.1016/J.Msea.2019.05.078 |
0.403 |
|
2019 |
Gu J, Ni S, Liu Y, Song M. Regulating the strength and ductility of a cold rolled FeCrCoMnNi high-entropy alloy via annealing treatment Materials Science and Engineering: A. 755: 289-294. DOI: 10.1016/J.Msea.2019.04.025 |
0.462 |
|
2019 |
Li X, Xia W, Yan H, Chen J, Su B, Song M, Li Z, Li Y. Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 753: 59-69. DOI: 10.1016/J.Msea.2019.03.028 |
0.448 |
|
2019 |
Guo L, Ou X, Ni S, Liu Y, Song M. Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys Materials Science and Engineering: A. 746: 356-362. DOI: 10.1016/J.Msea.2019.01.050 |
0.415 |
|
2019 |
Li Y, Ou X, Ni S, Song M. Deformation behaviors of a hot rolled near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 742: 390-399. DOI: 10.1016/J.Msea.2018.11.035 |
0.456 |
|
2019 |
Wu Q, Yan H, Chen J, Xia W, Song M, Su B. Dynamic precipitation behavior before dynamic recrystallization in a Mg-Zn-Mn alloy during hot compression Materials Characterization. 153: 14-23. DOI: 10.1016/J.Matchar.2019.04.041 |
0.333 |
|
2019 |
Guo B, Du Y, Yan N, Song M. Mechanical properties and microstructures of Al-10Mg-4.5Si matrix composites reinforced by carbon nanotubes Journal of Alloys and Compounds. 792: 860-868. DOI: 10.1016/J.Jallcom.2019.04.101 |
0.368 |
|
2019 |
Li J, Gao B, Wang Y, Chen X, Xin Y, Tang S, Liu B, Liu Y, Song M. Microstructures and mechanical properties of nano carbides reinforced CoCrFeMnNi high entropy alloys Journal of Alloys and Compounds. 792: 170-179. DOI: 10.1016/J.Jallcom.2019.03.403 |
0.448 |
|
2019 |
Wang B, An X, Huang Z, Song M, Ni S, Liu S. Nitrogen doped Co-Cr-Mo-W based alloys fabricated by selective laser melting with enhanced strength and good ductility Journal of Alloys and Compounds. 785: 305-311. DOI: 10.1016/J.Jallcom.2019.01.178 |
0.422 |
|
2019 |
An X, Ni S, Song M. Microstructural evolution and twinning behavior of a cold-rolled Zr70Ti30 alloy Journal of Alloys and Compounds. 784: 954-960. DOI: 10.1016/J.Jallcom.2019.01.081 |
0.442 |
|
2019 |
Liu S, Li K, Lu J, Sha G, Wang J, Yang M, Ji G, Song M, Wang J, Du Y. Corrigendum to “On the atomic model of Guinier-Preston zones in Al-Mg-Si-Cu alloys” [J. Alloys Compd. 745 (2018) 644–650] Journal of Alloys and Compounds. 781: 1210. DOI: 10.1016/J.Jallcom.2018.12.370 |
0.361 |
|
2019 |
Hasan MN, Liu YF, An XH, Gu J, Song M, Cao Y, Li YS, Zhu YT, Liao XZ. Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures International Journal of Plasticity. 123: 178-195. DOI: 10.1016/J.Ijplas.2019.07.017 |
0.429 |
|
2019 |
Ou X, Song M. Deformation mechanisms of mechanically induced phase transformations in iron Computational Materials Science. 162: 12-20. DOI: 10.1016/J.Commatsci.2019.02.028 |
0.345 |
|
2019 |
Zhou PF, Xiao DH, Li G, Song M. Nanoindentation Creep Behavior of CoCrFeNiMn High-Entropy Alloy under Different High-Pressure Torsion Deformations Journal of Materials Engineering and Performance. 28: 2620-2629. DOI: 10.1007/S11665-019-04092-1 |
0.414 |
|
2019 |
Gu J, Ni S, Song M. Effects of Torsional Deformation on the Mechanical Properties and Microstructures of a Commercial Pure Copper Journal of Materials Engineering and Performance. 28: 543-548. DOI: 10.1007/S11665-018-3825-5 |
0.411 |
|
2018 |
Xie Z, Ou X, Ni S, Song M. Phase transition and hardness evolution of a Ti-5Al-5Mo-1Fe-1Cr alloy subjected to isothermal aging. Micron (Oxford, England : 1993). 116: 15-21. PMID 30223177 DOI: 10.1016/J.Micron.2018.09.006 |
0.403 |
|
2018 |
Cao Y, Ni S, Liao X, Song M, Zhu Y. Structural evolutions of metallic materials processed by severe plastic deformation Materials Science & Engineering R-Reports. 133: 1-59. DOI: 10.1016/J.Mser.2018.06.001 |
0.392 |
|
2018 |
Gao L, Zhang L, Gu J, Ou X, Ni S, Li K, Du Y, Song M. Transformation of fracture mode of an Al-Mg-Si-Cu alloy subject to aging treatment Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 735: 201-207. DOI: 10.1016/J.Msea.2018.08.028 |
0.372 |
|
2018 |
Wang X, Guo B, Ni S, Yi J, Song M. Acquiring well balanced strength and ductility of Cu/CNTs composites with uniform dispersion of CNTs and strong interfacial bonding Materials Science and Engineering: A. 733: 144-152. DOI: 10.1016/J.Msea.2018.07.046 |
0.344 |
|
2018 |
Jiang J, Wu J, Ni S, Yan H, Song M. Improving the mechanical properties of a ZM61 magnesium alloy by pre-rolling and high strain rate rolling Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 712: 478-484. DOI: 10.1016/J.Msea.2017.12.014 |
0.466 |
|
2018 |
Xu S, Liu Y, Yang C, Zhao H, Liu B, Li J, Song M. Compositionally gradient Ti-Ta metal-metal composite with ultra-high strength Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 712: 386-393. DOI: 10.1016/J.Msea.2017.11.089 |
0.363 |
|
2018 |
Gu J, Zhang L, Tang Y, Song M, Ni S, An X, Du Y, Li Z, Liao X. Improving the strength and retaining the ductility of microstructural graded coarse-grained materials with low stacking fault energy Materials & Design. 160: 21-33. DOI: 10.1016/J.Matdes.2018.08.057 |
0.426 |
|
2018 |
Wu W, Zhou R, Wei B, Ni S, Liu Y, Song M. Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting Materials Characterization. 144: 605-610. DOI: 10.1016/J.Matchar.2018.08.019 |
0.377 |
|
2018 |
Gu J, Tang Y, Ni S, Song M. Effect of stacking fault energy on the split length of 9R phase in coarse-grained Cu-Al alloys Materials Characterization. 142: 9-14. DOI: 10.1016/J.Matchar.2018.05.021 |
0.394 |
|
2018 |
Guo B, Zhang X, Cen X, Wang X, Song M, Ni S, Yi J, Shen T, Du Y. Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes Materials Characterization. 136: 272-280. DOI: 10.1016/J.Matchar.2017.12.032 |
0.345 |
|
2018 |
Lyu G, Qiao J, Gu J, Song M, Pelletier J, Yao Y. Experimental analysis to the structural relaxation of Ti48Zr20V12Cu5Be15 metallic glass matrix composite Journal of Alloys and Compounds. 769: 443-452. DOI: 10.1016/J.Jallcom.2018.07.350 |
0.327 |
|
2018 |
Jiang J, Ni S, Yan H, Wu Q, Song M. New orientations between β′2 phase and α matrix in a Mg-Zn-Mn alloy processed by high strain rate rolling Journal of Alloys and Compounds. 750: 465-470. DOI: 10.1016/J.Jallcom.2018.04.005 |
0.311 |
|
2018 |
Liu S, Li K, Lu J, Sha G, Wang J, Yang M, Ji G, Song M, Wang J, Du Y. On the atomic model of Guinier-Preston zones in Al-Mg-Si-Cu alloys Journal of Alloys and Compounds. 745: 644-650. DOI: 10.1016/J.Jallcom.2018.01.304 |
0.33 |
|
2018 |
Guo L, Xiao D, Wu W, Ni S, Song M. Effect of Fe on microstructure, phase evolution and mechanical properties of (AlCoCrFeNi)100-xFex high entropy alloys processed by spark plasma sintering Intermetallics. 103: 1-11. DOI: 10.1016/J.Intermet.2018.09.011 |
0.422 |
|
2018 |
Wu W, Wei B, Ni S, Liu Y, Song M. Mechanisms for nucleation and propagation of incoherent twins in a CoCrFeNiMo 0.15 high-entropy alloy subject to cold rolling and annealing Intermetallics. 96: 104-110. DOI: 10.1016/J.Intermet.2018.03.005 |
0.423 |
|
2018 |
Zhou R, Liu Y, Zhou C, Li S, Wu W, Song M, Liu B, Liang X, Liaw P. Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser melting Intermetallics. 94: 165-171. DOI: 10.1016/J.Intermet.2018.01.002 |
0.392 |
|
2018 |
Luo K, Ni S, Song M. Fabricating a bulk FCC Hf by a combination of high-energy ball milling and spark plasma sintering International Journal of Refractory Metals & Hard Materials. 75: 107-110. DOI: 10.1016/J.Ijrmhm.2018.04.009 |
0.352 |
|
2018 |
Guo B, Chen B, Zhang X, Cen X, Wang X, Song M, Ni S, Yi J, Shen T, Du Y. Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes Carbon. 135: 224-235. DOI: 10.1016/J.Carbon.2018.04.048 |
0.365 |
|
2018 |
Zhang L, Wang Y, Ni S, Chen G, Li K, Du Y, Song M. The Evolution of Second-Phase Particles in 6111 Aluminum Alloy Processed by Hot and Cold Rolling Journal of Materials Engineering and Performance. 27: 1130-1137. DOI: 10.1007/S11665-018-3194-0 |
0.419 |
|
2017 |
Gu J, Zhang L, Ni S, Song M. Effects of grain size on the microstructures and mechanical properties of 304 austenitic steel processed by torsional deformation. Micron (Oxford, England : 1993). 105: 93-97. PMID 29245115 DOI: 10.1016/J.Micron.2017.12.003 |
0.413 |
|
2017 |
Guo L, Wu W, Ni S, Wang Z, Song M. Effects of annealing on the microstructural evolution and phase transition in an AlCrCuFeNi2 high-entropy alloy. Micron (Oxford, England : 1993). 101: 69-77. PMID 28662413 DOI: 10.1016/J.Micron.2017.06.007 |
0.399 |
|
2017 |
Wu W, Song M, Ni S, Wang J, Liu Y, Liu B, Liao X. Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion. Scientific Reports. 7: 46720. PMID 28429759 DOI: 10.1038/Srep46720 |
0.406 |
|
2017 |
Zhang L, Wang Y, Yang X, Li K, Ni S, Du Y, Song M. Texture, Microstructure and Mechanical Properties of 6111 Aluminum Alloy Subject to Rolling Deformation Materials Research-Ibero-American Journal of Materials. 20: 1360-1368. DOI: 10.1590/1980-5373-Mr-2017-0549 |
0.451 |
|
2017 |
Shen R, Zhou P, Xiao D, Song M. Microstructure and corrosion properties of SiC/Al-Mg-Cu-Si-Sn composites Science and Engineering of Composite Materials. 24: 709-713. DOI: 10.1515/Secm-2015-0280 |
0.382 |
|
2017 |
Wu W, Guo L, Liu B, Ni S, Liu Y, Song M. Effects of torsional deformation on the microstructures and mechanical properties of a CoCrFeNiMo0.15 high-entropy alloy Philosophical Magazine. 97: 3229-3245. DOI: 10.1080/14786435.2017.1369191 |
0.438 |
|
2017 |
Teng F, Lan GQ, Jiang Y, Song M, Liu SJ, Wu CP, Yi DQ. Alloying effects of Ag on grain boundaries and alumina interfaces in copper: a first principles prediction Rsc Advances. 7: 48230-48237. DOI: 10.1039/C7Ra08613J |
0.38 |
|
2017 |
Zhao H, Hu X, Song M, Ni S. Mechanisms for deformation induced hexagonal close-packed structure to face-centered cubic structure transformation in zirconium Scripta Materialia. 132: 63-67. DOI: 10.1016/J.Scriptamat.2017.01.034 |
0.306 |
|
2017 |
Guo B, Ni S, Yi J, Shen R, Tang Z, Du Y, Song M. Microstructures and mechanical properties of carbon nanotubes reinforced pure aluminum composites synthesized by spark plasma sintering and hot rolling Materials Science and Engineering: A. 698: 282-288. DOI: 10.1016/J.Msea.2017.05.068 |
0.356 |
|
2017 |
Guo B, Song M, Yi J, Ni S, Shen T, Du Y. Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface Materials & Design. 120: 56-65. DOI: 10.1016/J.Matdes.2017.01.096 |
0.363 |
|
2017 |
Xiao D, Zhou P, Wu W, Diao H, Gao M, Song M, Liaw P. Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys Materials & Design. 116: 438-447. DOI: 10.1016/J.Matdes.2016.12.036 |
0.422 |
|
2017 |
Hu X, Zhao H, Ni S, Song M. Grain refinement and phase transition of commercial pure zirconium processed by cold rolling Materials Characterization. 129: 149-155. DOI: 10.1016/J.Matchar.2017.04.037 |
0.377 |
|
2017 |
Wu W, Ni S, Liu Y, Liu B, Song M. Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion Materials Characterization. 127: 111-115. DOI: 10.1016/J.Matchar.2017.02.027 |
0.415 |
|
2017 |
Qiao JC, Sun BA, Gu J, Song M, Pelletier JM, Qiao JW, Yao Y, Yang Y. Abnormal internal friction in the in-situ Ti60Zr15V10Cu5Be10 metallic glass matrix composite Journal of Alloys and Compounds. 724: 921-931. DOI: 10.1016/J.Jallcom.2017.07.075 |
0.393 |
|
2017 |
Yang X, Li K, An X, Ni S, Wei W, Du Y, Song M. Influence of deformation microstructure on the precipitation behaviors of an Al-4Mg-0.3Cu alloy Journal of Alloys and Compounds. 695: 2238-2245. DOI: 10.1016/J.Jallcom.2016.11.073 |
0.45 |
|
2017 |
Wu J, Chen J, Yan H, Xia W, Su B, Yu L, Liu G, Song M. Enhancing the mechanical properties of high strain rate rolled Mg–6Zn–1Mn alloy by pre-rolling Journal of Materials Science. 52: 10557-10566. DOI: 10.1007/S10853-017-1214-3 |
0.443 |
|
2016 |
Wu W, Ni S, Liu Y, Song M. Effects of cold rolling and subsequent annealing on the microstructure of a HfNbTaTiZr high-entropy alloy Journal of Materials Research. 31: 3815-3823. DOI: 10.1557/Jmr.2016.445 |
0.452 |
|
2016 |
Yang C, Song M, Liu Y, Ni S, Sabbaghianrad S, Langdon TG. Evidence for a transition in deformation mechanism in nanocrystalline pure titanium processed by high-pressure torsion Philosophical Magazine. 1-11. DOI: 10.1080/14786435.2016.1177230 |
0.382 |
|
2016 |
Guo B, Yi J, Ni S, Shen R, Song M. Factors affecting the microstructure and mechanical properties of Ti-Al3Ti core-shell-structured particle-reinforced Al matrix composites Philosophical Magazine. 1-15. DOI: 10.1080/14786435.2016.1157638 |
0.409 |
|
2016 |
Gu J, Zhang L, Wang Y, Ni S, Guo S, Song M. Combined effect of isothermal annealing and pre-compression on mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass Transactions of Nonferrous Metals Society of China. 26: 1620-1628. DOI: 10.1016/S1003-6326(16)64270-X |
0.37 |
|
2016 |
Gu J, Zhang L, Ni S, Song M. Formation of large scaled zero-strain deformation twins in coarse-grained copper Scripta Materialia. 125: 49-53. DOI: 10.1016/J.Scriptamat.2016.08.006 |
0.37 |
|
2016 |
Zhao H, Ni S, Song M. Mechanically induced phase transformation from hexagonal close-packed structure to face-centred cubic structure in hafnium Materials Science and Engineering A. 660: 34-38. DOI: 10.1016/J.Msea.2016.02.077 |
0.35 |
|
2016 |
Yang X, Wang D, Wu Z, Yi J, Ni S, Du Y, Song M. A coupled EBSD/TEM study of the microstructural evolution of multi-axial compressed pure Al and Al-Mg alloy Materials Science and Engineering A. 658: 16-27. DOI: 10.1016/J.Msea.2016.01.080 |
0.432 |
|
2016 |
Guo B, Ni S, Shen R, Song M. Corrigendum to 'Fabrication of Ti–Al3Ti core–shell structured particle reinforced Al based composite with promising mechanical properties' [Mater. Sci. Eng. A 639 (2015) 269–273] Materials Science and Engineering: A. 656: 222. DOI: 10.1016/J.Msea.2016.01.041 |
0.347 |
|
2016 |
Chen C, Chen J, Yan H, Su B, Song M, Zhu S. Dynamic precipitation, microstructure and mechanical properties of Mg-5Zn-1Mn alloy sheets prepared by high strain-rate rolling Materials and Design. 100: 58-66. DOI: 10.1016/J.Matdes.2016.03.129 |
0.461 |
|
2016 |
Jiang J, Song M, Yan H, Yang C, Ni S. Deformation induced dynamic recrystallization and precipitation strengthening in an Mg[sbnd]Zn[sbnd]Mn alloy processed by high strain rate rolling Materials Characterization. 121: 135-138. DOI: 10.1016/J.Matchar.2016.09.025 |
0.474 |
|
2016 |
Li K, Idrissi H, Sha G, Song M, Lu J, Shi H, Wang W, Ringer SP, Du Y, Schryvers D. Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys Materials Characterization. 118: 352-362. DOI: 10.1016/J.Matchar.2016.06.007 |
0.378 |
|
2016 |
Su C, Chen Y, Yu P, Song M, Chen W, Guo SF. Linking the thermal characteristics and mechanical properties of Fe-based bulk metallic glasses Journal of Alloys and Compounds. 663: 867-871. DOI: 10.1016/J.Jallcom.2015.12.196 |
0.327 |
|
2016 |
Shen R, Wang Y, Guo B, Song M. Precipitation Sequence of a SiC Particle Reinforced Al-Mg-Si Alloy Composite Journal of Materials Engineering and Performance. 1-6. DOI: 10.1007/S11665-016-2370-3 |
0.424 |
|
2016 |
Yang X, Yi J, Ni S, Du Y, Song M. Microstructural Evolution and Structure-Hardness Relationship in an Al-4wt.%Mg Alloy Processed by High-Pressure Torsion Journal of Materials Engineering and Performance. 25: 1909-1915. DOI: 10.1007/S11665-016-2044-1 |
0.427 |
|
2015 |
Yang XH, Ni S, Song M. Microstructural Evolution and Mechanical Properties of Pure Magnesium during Multi-Axial Compression Applied Mechanics and Materials. 2759-2764. DOI: 10.4028/Www.Scientific.Net/Amm.713-715.2759 |
0.406 |
|
2015 |
Liu G, Ni S, Song M. Effect of indentation size and grain/sub-grain size on microhardness of high purity tungsten Transactions of Nonferrous Metals Society of China. 25: 3240-3246. DOI: 10.1016/S1003-6326(15)63958-9 |
0.357 |
|
2015 |
Yao T, Liu Y, Liu B, Song M, Zhao K, Zhang W, He Y. Influence of carburization on oxidation behavior of High Nb contained TiAl alloy Surface and Coatings Technology. 277: 210-215. DOI: 10.1016/J.Surfcoat.2015.07.058 |
0.394 |
|
2015 |
Li F, Xie Y, Gu J, Song M, Ni S, Guo S, Liao X. Inhomogeneous creep deformation in metallic glasses Materials Science and Engineering A. 648: 57-60. DOI: 10.1016/J.Msea.2015.09.048 |
0.33 |
|
2015 |
Zhao H, Ni S, Song M, Xiong X, Liang X, Li H. Grain refinement via formation and subdivision of microbands and thin laths structures in cold-rolled hafnium Materials Science and Engineering A. 645: 328-332. DOI: 10.1016/J.Msea.2015.08.019 |
0.413 |
|
2015 |
Yang X, Ni S, Song M. Partial dislocation emission in a superfine grained Al–Mg alloy subject to multi-axial compression Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 641: 189-193. DOI: 10.1016/J.Msea.2015.05.098 |
0.368 |
|
2015 |
Guo B, Ni S, Shen R, Song M. Fabrication of Ti-Al3Ti core-shell structured particle reinforced Al based composite with promising mechanical properties Materials Science and Engineering A. 639: 269-273. DOI: 10.1016/J.Msea.2015.05.015 |
0.399 |
|
2015 |
Yang C, Ni S, Liu Y, Song M. Effects of sintering parameters on the hardness and microstructures of bulk bimodal titanium Materials Science and Engineering: A. 625: 264-270. DOI: 10.1016/J.Msea.2014.12.015 |
0.391 |
|
2015 |
Wu W, Guo B, Xue Y, Shen R, Ni S, Song M. Ni-AlxNiy core–shell structured particle reinforced Al-based composites fabricated by in-situ powder metallurgy technique Materials Chemistry and Physics. 160: 352-358. DOI: 10.1016/J.Matchemphys.2015.04.051 |
0.407 |
|
2015 |
Zhang W, Liu Y, Wu H, Song M, Zhang T, Lan X, Yao T. Elastic modulus of phases in Ti–Mo alloys Materials Characterization. 106: 302-307. DOI: 10.1016/J.Matchar.2015.06.008 |
0.428 |
|
2015 |
Liu G, Gu J, Ni S, Liu Y, Song M. Microstructural evolution of Cu–Al alloys subjected to multi-axial compression Materials Characterization. 103: 107-119. DOI: 10.1016/J.Matchar.2015.03.021 |
0.467 |
|
2015 |
Gheiratmand T, Madaah Hosseini HR, Davami P, Gjoka M, Song M. The effect of mechanical milling on the soft magnetic properties of amorphous FINEMET alloy Journal of Magnetism and Magnetic Materials. 381: 322-327. DOI: 10.1016/J.Jmmm.2015.01.016 |
0.349 |
|
2015 |
Xue Y, Shen R, Ni S, Song M, Xiao D. Fabrication, microstructure and mechanical properties of Al–Fe intermetallic particle reinforced Al-based composites Journal of Alloys and Compounds. 618: 537-544. DOI: 10.1016/J.Jallcom.2014.09.009 |
0.402 |
|
2015 |
Xue Y, Shen R, Ni S, Xiao D, Song M. Effects of Sintering Atmosphere on the Mechanical Properties of Al-Fe Particle-Reinforced Al-Based Composites Journal of Materials Engineering and Performance. DOI: 10.1007/S11665-015-1470-9 |
0.38 |
|
2015 |
Xiao DH, Geng ZW, Chen L, Wu Z, Diao HY, Song M, Zhou PF. Effects of Alloying Elements on Microstructure and Properties of Magnesium Alloys for Tripling Ball Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 4793-4803. DOI: 10.1007/S11661-015-3053-7 |
0.457 |
|
2015 |
Gheiratmand T, Hosseini HRM, Davami P, Ababei G, Song M. Mechanism of Mechanically Induced Nanocrystallization of Amorphous FINEMET Ribbons During Milling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 2718-2725. DOI: 10.1007/S11661-015-2848-X |
0.37 |
|
2014 |
Fan JL, Cheng HC, Song M. Simulation of the yield strength of mo alloys at both room and elevated temperatures Advanced Materials Research. 937: 130-135. DOI: 10.4028/Www.Scientific.Net/Amr.937.130 |
0.422 |
|
2014 |
Gu J, Wang Y, Zhang L, Ni S, Song M. Cooling-rate-dependent microstructure and mechanical properties of a CuZrAlAg alloy Philosophical Magazine Letters. 94: 716-723. DOI: 10.1080/09500839.2014.971084 |
0.472 |
|
2014 |
Li K, Béché A, Song M, Sha G, Lu X, Zhang K, Du Y, Ringer SP, Schryvers D. Atomistic structure of Cu-containing β″ precipitates in an Al-Mg-Si-Cu alloy Scripta Materialia. 75: 86-89. DOI: 10.1016/J.Scriptamat.2013.11.030 |
0.344 |
|
2014 |
An XH, Song M, Huang Y, Liao XZ, Ringer SP, Langdon TG, Zhu YT. Twinning via the motion of incoherent twin boundaries nucleated at grain boundaries in a nanocrystalline Cu alloy Scripta Materialia. 72: 35-38. DOI: 10.1016/J.Scriptamat.2013.10.014 |
0.399 |
|
2014 |
Gu J, Song M, Ni S, Liao X, Guo S. Improving the plasticity of bulk metallic glasses via pre-compression below the yield stress Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 602: 68-76. DOI: 10.1016/J.Msea.2014.02.065 |
0.33 |
|
2014 |
Liu G, Song M, Liu X, Ni S, Wang S, He Y, Liu Y. An investigation of the mechanical behaviors of micro-sized tungsten whiskers using nanoindentation Materials Science and Engineering: A. 594: 278-286. DOI: 10.1016/J.Msea.2013.11.084 |
0.309 |
|
2014 |
Wang Y, Song M, Ni S, Xue Y. In situ formed core–shell structured particle reinforced aluminum matrix composites Materials & Design. 56: 405-408. DOI: 10.1016/J.Matdes.2013.11.030 |
0.36 |
|
2014 |
Li K, Song M, Du Y, Tang Y, Dong H, Ni S. Investigation of the as-solidified microstructure of an Al–Mg–Si–Cu alloy Journal of Alloys and Compounds. 602: 312-321. DOI: 10.1016/J.Jallcom.2014.03.026 |
0.415 |
|
2014 |
Li F, Gu J, Song M, Ni S, Guo S. The evolution of local mechanical properties of bulk metallic glasses caused by structural inhomogeneity Journal of Alloys and Compounds. 591: 315-319. DOI: 10.1016/J.Jallcom.2013.12.182 |
0.315 |
|
2013 |
Gheiratmand T, Hosseini HR, Davami P, Ostadhossein F, Song M, Gjoka M. On the effect of cooling rate during melt spinning of FINEMET ribbons. Nanoscale. 5: 7520-7. PMID 23832313 DOI: 10.1039/C3Nr01213A |
0.356 |
|
2013 |
Cheng HC, Fan JL, Song M. Simulation of the elastic modulus of Mo alloys at both room and high temperatures Advanced Materials Research. 785: 81-85. DOI: 10.4028/Www.Scientific.Net/Amr.785-786.81 |
0.451 |
|
2013 |
Song M, Liu Y, He X, Bei H, Hu W, Liu F, Li Z. Nanoindentation creep of ultrafine-grained Al 2O 3 particle reinforced copper composites Materials Science and Engineering A. 560: 80-85. DOI: 10.1016/J.Msea.2012.09.037 |
0.375 |
|
2013 |
Gu J, Song M, Ni S, Guo S, He Y. Effects of annealing on the hardness and elastic modulus of a Cu36Zr48Al8Ag8 bulk metallic glass Materials & Design. 47: 706-710. DOI: 10.1016/J.Matdes.2012.12.071 |
0.366 |
|
2013 |
Shen T, Xiao D, Ou X, Song M, Li X, He Y. Preparation of ultrafine WC-10Co composite powders by reduction and carbonization Journal of Central South University. 20: 2090-2095. DOI: 10.1007/S11771-013-1711-8 |
0.324 |
|
2013 |
Shen PZ, Gao HY, Song M, He YH. Preparation and Pore Structure Stability at High Temperature of Porous Fe-Al Intermetallics Journal of Materials Engineering and Performance. 22: 3959-3966. DOI: 10.1007/S11665-013-0703-Z |
0.33 |
|
2013 |
Xiao DH, Li XX, Wu ZS, Liu D, Yuan TC, Song M. Fabrication of In Situ TiBCSi Composite by Hot-Press Sintering Journal of Materials Engineering and Performance. 22: 651-654. DOI: 10.1007/S11665-012-0341-X |
0.398 |
|
2012 |
Cheng HC, Song M. An Investigation of the Microstructures and Mechanical Properties of FeSiBCuAl Alloys Advanced Materials Research. 627: 646-650. DOI: 10.4028/Www.Scientific.Net/Amr.627.646 |
0.466 |
|
2012 |
Li K, Song M, Du Y, Fang X. Effect of Minor Cu Addition on the Precipitation Sequence of an As-Cast Al-Mg-Si 6005 Alloy Archives of Metallurgy and Materials. 57: 457-467. DOI: 10.2478/V10172-012-0047-Y |
0.379 |
|
2012 |
Sun YY, Song M. Influence of Al addition on the thermal stability and mechanical properties of Fe76.5-xCu1Si13.5b9Alx amorphous alloys Journal of Mining and Metallurgy, Section B. 48: 45-51. DOI: 10.2298/Jmmb110727009S |
0.397 |
|
2012 |
Song M, Sun YY, He YH, Guo SF. Structure related hardness and elastic modulus of bulk metallic glass Journal of Applied Physics. 111: 53518. DOI: 10.1063/1.3692568 |
0.316 |
|
2012 |
Li Y, Song M, He Y. Effect of Size and Aspect Ratio on the Mechanical Properties of ZrAlNiCuNb Metallic Glass Rare Metal Materials and Engineering. 41: 762-766. DOI: 10.1016/S1875-5372(12)60045-9 |
0.35 |
|
2012 |
Song M, Sun Y, He Y. Structure dependent hardness and elastic modulus of FeCuSiBAl amorphous/nanocrystalline alloys Materials Science and Engineering: A. 556: 974-976. DOI: 10.1016/J.Msea.2012.07.007 |
0.452 |
|
2012 |
Sun YY, Song M, Liao XZ, Sha G, He YH. Effects of isothermal annealing on the microstructures and mechanical properties of a FeCuSiBAl amorphous alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 543: 145-151. DOI: 10.1016/J.Msea.2012.02.062 |
0.405 |
|
2012 |
Ou XQ, Xiao DH, Shen TT, Song M, He YH. Characterization and preparation of ultra-fine grained WC–Co alloys with minor La-additions International Journal of Refractory Metals & Hard Materials. 31: 266-273. DOI: 10.1016/J.Ijrmhm.2011.12.011 |
0.467 |
|
2012 |
Gong X, Fan JL, Ding F, Song M, Huang BY. Effect of tungsten content on microstructure and quasi-static tensile fracture characteristics of rapidly hot-extruded W-Ni-Fe alloys International Journal of Refractory Metals & Hard Materials. 30: 71-77. DOI: 10.1016/J.Ijrmhm.2011.06.014 |
0.45 |
|
2012 |
Sun C, Shen R, Song M. Effects of Sintering and Extrusion on the Microstructures and Mechanical Properties of a SiC/Al-Cu Composite Journal of Materials Engineering and Performance. 21: 373-381. DOI: 10.1007/S11665-011-9940-1 |
0.431 |
|
2012 |
Fang X, Du Y, Song M, Li K, Jiang C. Effects of Cu content on the precipitation process of Al–Zn–Mg alloys Journal of Materials Science. 47: 8174-8187. DOI: 10.1007/S10853-012-6714-6 |
0.403 |
|
2012 |
Fang X, Song M, Li K, Du Y, Zhao D, Jiang C, Zhang H. Effects of Cu and Al on the crystal structure and composition of η (MgZn2) phase in over-aged Al–Zn–Mg–Cu alloys Journal of Materials Science. 47: 5419-5427. DOI: 10.1007/S10853-012-6428-9 |
0.401 |
|
2011 |
Sun C, Song M, Shen RJ, Du Y. Mechanical Behavior of SiC Fiber Reinforced Al Matrix Composites: A Study Based on Finite Element Method Advanced Materials Research. 2785-2789. DOI: 10.4028/Www.Scientific.Net/Amr.239-242.2785 |
0.344 |
|
2011 |
Li HZ, Liang XP, Song M, Zeng M. Flow Behavior and Microstructural Evolution of a 7039 Aluminum Alloy during Hot Deformation Advanced Materials Research. 2395-2398. DOI: 10.4028/Www.Scientific.Net/Amr.239-242.2395 |
0.387 |
|
2011 |
Song M, He Y-. Investigation of primary Al3(Sc,Zr) particles in Al–Sc–Zr alloys Materials Science and Technology. 27: 431-433. DOI: 10.1179/174328409X443236 |
0.352 |
|
2011 |
Song M, Liao X, He Y. Effect of sub-Tgannealing on the mechanical properties of a ZrAlNiCuNb bulk metallic glass Philosophical Magazine Letters. 91: 713-723. DOI: 10.1080/09500839.2011.609842 |
0.37 |
|
2011 |
Gong X, Fan JL, Ding F, Song M, Huang BY, Tian JM. Microstructure and highly enhanced mechanical properties of fine-grained tungsten heavy alloy after one-pass rapid hot extrusion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 3646-3652. DOI: 10.1016/J.Msea.2011.01.070 |
0.494 |
|
2011 |
Wang Z, Song M, Sun C, He Y. Effects of particle size and distribution on the mechanical properties of SiC reinforced Al–Cu alloy composites Materials Science and Engineering: A. 528: 1131-1137. DOI: 10.1016/J.Msea.2010.11.028 |
0.351 |
|
2011 |
Li K, Song M, Du Y, Zhang H. Simulation of the electron diffraction patterns from needle/rod-like precipitates in Al-Mg-Si alloys Materials Characterization. 62: 894-903. DOI: 10.1016/J.Matchar.2011.06.006 |
0.33 |
|
2011 |
Song M, Li Y, Wu Z, He Y. The effect of annealing on the mechanical properties of a ZrAlNiCu metallic glass Journal of Non-Crystalline Solids. 357: 1239-1241. DOI: 10.1016/J.Jnoncrysol.2010.09.024 |
0.364 |
|
2011 |
Sun YY, Song M, Liao XZ, He YH. Mechanical properties of a FeCuSiB alloy with amorphous and/or crystalline structures Journal of Alloys and Compounds. 509: 6603-6608. DOI: 10.1016/J.Jallcom.2011.03.103 |
0.435 |
|
2011 |
Song M, He Y. Effect of isothermal annealing on the compressive strength of a ZrAlNiCuNb metallic glass Journal of Alloys and Compounds. 509: 2606-2610. DOI: 10.1016/J.Jallcom.2010.11.114 |
0.371 |
|
2011 |
Shen TT, Xiao DH, Ou XQ, Song M, He YH, Lin N, Zhang DF. Effects of LaB6 addition on the microstructure and mechanical properties of ultrafine grained WC–10Co alloys Journal of Alloys and Compounds. 509: 1236-1243. DOI: 10.1016/J.Jallcom.2010.09.202 |
0.479 |
|
2011 |
Ou XQ, Song M, Shen TT, Xiao DH, He YH. Fabrication and mechanical properties of ultrafine grained WC–10Co–0.45Cr3C2–0.25VC alloys International Journal of Refractory Metals & Hard Materials. 29: 260-267. DOI: 10.1016/J.Ijrmhm.2010.11.004 |
0.455 |
|
2010 |
Xiao DH, Song M, Chen KH. Effect of Severe Plastic Deformation on Microstructure and Properties of Al-Cu-Mg-Ag Aluminum Alloys Materials Science Forum. 599-604. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.599 |
0.453 |
|
2010 |
Fang X, Song M, Li K, Du Y. Precipitation sequence of an aged Al-Mg-Si alloy Journal of Mining and Metallurgy, Section B. 46: 171-180. DOI: 10.2298/Jmmb1002171F |
0.419 |
|
2010 |
Song M, He Y-. Effects of Zr content on elongation of Al–Sc alloy Materials Science and Technology. 26: 1265-1268. DOI: 10.1179/174328409X443263 |
0.446 |
|
2010 |
Song M, Li Y, He Y. Effect of strain rate on the compressive behaviour of a Zr56Al10.9Ni4.6Cu27.8Nb0.7 bulk metallic glass Philosophical Magazine Letters. 90: 763-770. DOI: 10.1080/09500839.2010.507175 |
0.331 |
|
2010 |
Wang Z, Song M, Sun C, Xiao D, He Y. Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al–Cu alloy composites Materials Science and Engineering: A. 527: 6537-6542. DOI: 10.1016/J.Msea.2010.07.017 |
0.369 |
|
2010 |
Fan JL, Gong X, Huang BY, Song M, Liu T, Qi MG, Tian JM, Li SK. Dynamic failure and adiabatic shearbands in fine-grain 93W-4.9Ni-2.1Fe alloy with Y2O3 addition under lower high-strain-rate (HSR) compression Mechanics of Materials. 42: 24-30. DOI: 10.1016/J.Mechmat.2009.08.006 |
0.411 |
|
2010 |
Li Y, Song M, He Y. Effect of quenching mode on the mechanical properties of a Zr64Al10Ni15Cu11 metallic glass Materials & Design. 31: 3555-3558. DOI: 10.1016/J.Matdes.2010.01.040 |
0.348 |
|
2010 |
Li H, Li Z, Song M, Liang X, Guo F. Hot deformation behavior and microstructural evolution of Ag-containing 2519 aluminum alloy Materials & Design. 31: 2171-2176. DOI: 10.1016/J.Matdes.2009.10.061 |
0.38 |
|
2010 |
Song M, He Y. Effects of die-pressing pressure and extrusion on the microstructures and mechanical properties of SiC reinforced pure aluminum composites Materials & Design. 31: 985-989. DOI: 10.1016/J.Matdes.2009.08.011 |
0.378 |
|
2010 |
Fan JL, Gong X, Huang BY, Song M, Liu T, Tian JM. Densification behavior of nanocrystalline W-Ni-Fe composite powders prepared by sol-spray drying and hydrogen reduction process Journal of Alloys and Compounds. 489: 188-194. DOI: 10.1016/J.Jallcom.2009.09.050 |
0.382 |
|
2010 |
Xiao DH, He YH, Song M, Lin N, Zhang RF. Y2O3- and NbC-doped ultrafine WC–10Co alloys by low pressure sintering International Journal of Refractory Metals & Hard Materials. 28: 407-411. DOI: 10.1016/J.Ijrmhm.2009.12.008 |
0.45 |
|
2010 |
Sun Y, Song M, He Y. Effects of Sc content on the mechanical properties of Al-Sc alloys Rare Metals. 29: 451-455. DOI: 10.1007/S12598-010-0148-6 |
0.448 |
|
2010 |
Sun C, Song M, Wang Z, He Y. Effect of Particle Size on the Microstructures and Mechanical Properties of SiC-Reinforced Pure Aluminum Composites Journal of Materials Engineering and Performance. 20: 1606-1612. DOI: 10.1007/S11665-010-9801-3 |
0.344 |
|
2010 |
Song M, He Y, Fang S. Effects of Zr Content on the Yield Strength of an Al-Sc Alloy Journal of Materials Engineering and Performance. 20: 377-381. DOI: 10.1007/S11665-010-9693-2 |
0.453 |
|
2010 |
Shen PZ, Song M, He YH, Gao HY, Zou J, Xu NP, Huang BY, Liu CT. Synthesis and characterization of porous Fe–25 wt.% Al alloy with controllable pore structure Powder Metallurgy and Metal Ceramics. 49: 183-192. DOI: 10.1007/S11106-010-9220-X |
0.413 |
|
2010 |
Song M, He Y, Fang S. Yield stress of SiC reinforced aluminum alloy composites Journal of Materials Science. 45: 4097-4110. DOI: 10.1007/S10853-010-4498-0 |
0.427 |
|
2009 |
Xiao DH, Song M, Huang BY, Yi JH, He YH, Li YM. Effect of Sc addition on microstructure and mechanical properties of Al–Cu–Mg–Ag–Zr alloy Materials Science and Technology. 25: 747-752. DOI: 10.1179/174328408X326101 |
0.479 |
|
2009 |
XIAO Dh, HE Yh, LUO Wh, SONG M. Effect of VC and NbC additions on microstructure and properties of ultrafine WC-10Co cemented carbides Transactions of Nonferrous Metals Society of China (English Edition). 19: 1520-1525. DOI: 10.1016/S1003-6326(09)60063-7 |
0.422 |
|
2009 |
SONG M. Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites Transactions of Nonferrous Metals Society of China (English Edition). 19: 1400-1404. DOI: 10.1016/S1003-6326(09)60040-6 |
0.383 |
|
2009 |
Wu ZG, Song M, He YH. Effects of Er on the microstructure and mechanical properties of an as-extruded Al-Mg alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 504: 183-187. DOI: 10.1016/J.Msea.2008.11.030 |
0.429 |
|
2009 |
Song M, He Y, Wu Z, Huang B. Multi-scale model for the ductility of multiple phase materials Mechanics of Materials. 41: 622-633. DOI: 10.1016/J.Mechmat.2008.11.003 |
0.322 |
|
2009 |
Fang SF, Wang MP, Song M. An approach for the aging process optimization of Al–Zn–Mg–Cu series alloys Materials & Design. 30: 2460-2467. DOI: 10.1016/J.Matdes.2008.10.008 |
0.314 |
|
2009 |
Song M, He Y, Xiao D, Huang B. Effect of thermomechanical treatment on the mechanical properties of an Al–Cu–Mg alloy Materials & Design. 30: 857-861. DOI: 10.1016/J.Matdes.2008.05.053 |
0.444 |
|
2009 |
Xiao DH, Song M. Superplastic deformation of an as-rolled Al–Cu–Mg–Ag alloy Materials & Design. 30: 424-426. DOI: 10.1016/J.Matdes.2008.05.001 |
0.379 |
|
2009 |
Dong H, Jiang Y, He Y, Song M, Zou J, Xu N, Huang B, Liu C, Liaw P. Formation of porous Ni–Al intermetallics through pressureless reaction synthesis Journal of Alloys and Compounds. 484: 907-913. DOI: 10.1016/J.Jallcom.2009.05.079 |
0.366 |
|
2009 |
Xiao DH, Song M, Zhang FQ, He YH. Characterization and preparation of Mg―Al―Zn alloys with minor Sc Journal of Alloys and Compounds. 484: 416-421. DOI: 10.1016/J.Jallcom.2009.04.113 |
0.446 |
|
2009 |
Song M, Xiao D, Zhang F. Effect of Ce on the thermal stability of the Ω phase in an Al-Cu-Mg-Ag alloy Rare Metals. 28: 156-159. DOI: 10.1007/S12598-009-0031-5 |
0.396 |
|
2009 |
Shen PZ, Song M, Gao HY, He YH, Zou J, Xu NP, Huang BY, Liu CT. Structural characteristics and high-temperature oxidation behavior of porous Fe-40 at.%Al alloy Journal of Materials Science. 44: 4413-4421. DOI: 10.1007/S10853-009-3669-3 |
0.4 |
|
2008 |
Song M, Baker I, Cole DM. The effect of particles on creep rate and microstructures of granular ice Journal of Glaciology. 54: 533-537. DOI: 10.3189/002214308785836959 |
0.539 |
|
2008 |
Song M, Wu Z, He Y. Effects of Yb on the mechanical properties and microstructures of an Al–Mg alloy Materials Science and Engineering: A. 497: 519-523. DOI: 10.1016/J.Msea.2008.07.020 |
0.42 |
|
2008 |
Song M, Huang B. Effects of particle size on the fracture toughness of SiCp/Al alloy metal matrix composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 488: 601-607. DOI: 10.1016/J.Msea.2008.03.022 |
0.368 |
|
2008 |
Song M, Xiao D. Modeling the fracture toughness and tensile ductility of SiCp/Al metal matrix composites Materials Science and Engineering A. 474: 371-375. DOI: 10.1016/J.Msea.2007.05.075 |
0.363 |
|
2008 |
Song M, Chen K. Effects of the enhanced heat treatment on the mechanical properties and stress corrosion behavior of an Al-Zn-Mg alloy Journal of Materials Science. 43: 5265-5273. DOI: 10.1007/S10853-008-2773-0 |
0.439 |
|
2007 |
Xiao DH, Song M, Chen KH, Huang BY. Effect of rare earth Yb addition on mechanical properties of Al–5·3Cu–0·8Mg–0·6Ag alloy Materials Science and Technology. 23: 1156-1160. DOI: 10.1179/174328407X213260 |
0.443 |
|
2007 |
Huang LP, Chen KH, Li S, Song M. Influence of high-temperature pre-precipitation on local corrosion behaviors of Al–Zn–Mg alloy Scripta Materialia. 56: 305-308. DOI: 10.1016/J.Scriptamat.2006.09.028 |
0.423 |
|
2007 |
Song M. Modeling the hardness and yield strength evolutions of aluminum alloy with rod/needle-shaped precipitates Materials Science and Engineering A. 443: 172-177. DOI: 10.1016/J.Msea.2006.08.025 |
0.389 |
|
2007 |
Song M, Chen K, Qi X. Modeling effects of constituents and dispersoids on tensile ductility of aluminum alloy Journal of Central South University of Technology. 14: 456-459. DOI: 10.1007/S11771-007-0089-X |
0.422 |
|
2007 |
Song M, Huang D. Experimental and Modeling of the Coupled Influences of Variously Sized Particles on the Tensile Ductility of SiC p /Al Metal Matrix Composites Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 38: 2127-2137. DOI: 10.1007/S11661-007-9276-5 |
0.389 |
|
2007 |
Song M, Li X, Chen KH. Modeling the Age-Hardening Behavior of SiC/Al Metal Matrix Composites Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 38: 638-648. DOI: 10.1007/S11661-006-9064-7 |
0.397 |
|
2007 |
Song M, Chen KH, Qi XW, Huang LP. A multi-scaled model for the fracture toughness of an aluminum alloy Journal of Materials Science. 42: 4177-4182. DOI: 10.1007/S10853-006-0678-3 |
0.332 |
|
2006 |
Song M, Cole DM, Baker I. Investigation of Newtonian creep in polycrystalline ice Philosophical Magazine Letters. 86: 763-771. DOI: 10.1080/09500830601023787 |
0.488 |
|
2006 |
Song M. Effects of particles on the anelasticity of granular ice Philosophical Magazine Letters. 86: 669-672. DOI: 10.1080/09500830600957365 |
0.331 |
|
2006 |
Song M, Chen K, Huang L. Effects of Ag addition on mechanical properties and microstructures of Al-8Cu-0.5Mg alloy Transactions of Nonferrous Metals Society of China. 16: 766-771. DOI: 10.1016/S1003-6326(06)60323-3 |
0.456 |
|
2006 |
Song M, Cole DM, Baker I. An investigation of the effects of particles on creep of polycrystalline ice Scripta Materialia. 55: 91-94. DOI: 10.1016/J.Scriptamat.2006.03.029 |
0.518 |
|
2006 |
Chen K, Huang D, Song M, Li X, Fang L. A Mesomechanical Ductility Model of SiC(subscript p)/Al Composite Journal of Central South University of Technology. 13: 325-331. DOI: 10.1007/S11771-006-0043-3 |
0.352 |
|
2005 |
Song M, Cole DM, Baker I. Creep of granular ice with and without dispersed particles Journal of Glaciology. 51: 210-218. DOI: 10.3189/172756505781829377 |
0.523 |
|
2005 |
Song M, Baker I, Cole DM. The effect of particles on dynamic recrystallization and fabric development of granular ice during creep Journal of Glaciology. 51: 377-382. DOI: 10.3189/172756505781829287 |
0.536 |
|
2004 |
Song M, Cole DM, Baker I. Initial experiments on the effects of particles at grain boundaries on the anelasticity and creep behavior of granular ice Annals of Glaciology. 39: 397-401. DOI: 10.3189/172756404781814069 |
0.528 |
|
Show low-probability matches. |