Year |
Citation |
Score |
2020 |
Tang Z, Li Y, Kusiak A. A Deep Learning Model for Measuring Oxygen Content of Boiler Flue Gas Ieee Access. 8: 12268-12278. DOI: 10.1109/Access.2020.2965199 |
0.358 |
|
2020 |
Kusiak A. Open manufacturing: a design-for-resilience approach International Journal of Production Research. 58: 4647-4658. DOI: 10.1080/00207543.2020.1770894 |
0.312 |
|
2019 |
Kusiak A. Convolutional and generative adversarial neural networks in manufacturing International Journal of Production Research. 58: 1594-1604. DOI: 10.1080/00207543.2019.1662133 |
0.306 |
|
2019 |
Zhu J, Shen Y, Song Z, Zhou D, Zhang Z, Kusiak A. Data-driven building load profiling and energy management Sustainable Cities and Society. 49: 101587. DOI: 10.1016/J.Scs.2019.101587 |
0.638 |
|
2019 |
Kusiak A. Service manufacturing: Basic concepts and technologies Journal of Manufacturing Systems. 52: 198-204. DOI: 10.1016/J.Jmsy.2019.07.002 |
0.352 |
|
2019 |
Kusiak A. Fundamentals of smart manufacturing: A multi-thread perspective Annual Reviews in Control. 47: 214-220. DOI: 10.1016/J.Arcontrol.2019.02.001 |
0.345 |
|
2018 |
He Y, Kusiak A. Performance Assessment of Wind Turbines: Data-Derived Quantitative Metrics Ieee Transactions On Sustainable Energy. 9: 65-73. DOI: 10.1109/Tste.2017.2715061 |
0.369 |
|
2018 |
Kuo Y, Kusiak A. From data to big data in production research: the past and future trends International Journal of Production Research. 57: 4828-4853. DOI: 10.1080/00207543.2018.1443230 |
0.326 |
|
2018 |
Tao F, Qi Q, Liu A, Kusiak A. Data-driven smart manufacturing Journal of Manufacturing Systems. 48: 157-169. DOI: 10.1016/J.Jmsy.2018.01.006 |
0.387 |
|
2017 |
Kusiak A. Smart manufacturing must embrace big data. Nature. 544: 23-25. PMID 28383012 DOI: 10.1038/544023A |
0.345 |
|
2017 |
Long H, Zhang Z, Song Z, Kusiak A. Formulation and Analysis of Grid and Coordinate Models for Planning Wind Farm Layouts Ieee Access. 5: 1810-1819. DOI: 10.1109/Access.2017.2657638 |
0.673 |
|
2017 |
Ouyang T, Zha X, Qin L, Kusiak A. Optimisation of time window size for wind power ramps prediction Iet Renewable Power Generation. 11: 1270-1277. DOI: 10.1049/Iet-Rpg.2016.0341 |
0.415 |
|
2017 |
Ouyang T, Kusiak A, He Y. Modeling wind-turbine power curve: A data partitioning and mining approach Renewable Energy. 102: 1-8. DOI: 10.1016/J.Renene.2016.10.032 |
0.422 |
|
2017 |
Francis H, Kusiak A. Prediction of Engine Demand with a Data-driven Approach Procedia Computer Science. 103: 28-35. DOI: 10.1016/J.Procs.2017.01.005 |
0.366 |
|
2017 |
Ouyang T, Kusiak A, He Y. Predictive model of yaw error in a wind turbine Energy. 123: 119-130. DOI: 10.1016/J.Energy.2017.01.150 |
0.422 |
|
2016 |
Kusiak A. Renewables: Share data on wind energy. Nature. 529: 19-21. PMID 26738579 DOI: 10.1038/529019A |
0.363 |
|
2016 |
Teng W, Zhang X, Liu Y, Kusiak A, Ma Z. Prognosis of the Remaining Useful Life of Bearings in a Wind Turbine Gearbox Energies. 10: 32. DOI: 10.3390/En10010032 |
0.374 |
|
2016 |
Sattari M, Rezazadeh-Joudi A, Kusiak A. Assessment of different methods for estimation of missing data in precipitation studies Hydrology Research. 48: 1032-1044. DOI: 10.2166/Nh.2016.364 |
0.34 |
|
2016 |
Altuntas S, Dereli T, Kusiak A. Assessment of corporate innovation capability with a data-mining approach: industrial case studies Computers & Industrial Engineering. 102: 58-68. DOI: 10.1016/J.Cie.2016.10.018 |
0.386 |
|
2016 |
Zhang Z, Kusiak A, Zeng Y, Wei X. Modeling and optimization of a wastewater pumping system with data-mining methods Applied Energy. 164: 303-311. DOI: 10.1016/J.Apenergy.2015.11.061 |
0.716 |
|
2015 |
Zhang Z, He X, Kusiak A. Data-driven minimization of pump operating and maintenance cost Engineering Applications of Artificial Intelligence. 40: 37-46. DOI: 10.1016/J.Engappai.2015.01.003 |
0.578 |
|
2015 |
Zeng Y, Zhang Z, Kusiak A. Predictive modeling and optimization of a multi-zone HVAC system with data mining and firefly algorithms Energy. 86: 393-402. DOI: 10.1016/J.Energy.2015.04.045 |
0.574 |
|
2015 |
Wei X, Kusiak A, Li M, Tang F, Zeng Y. Multi-objective optimization of the HVAC (heating, ventilation, and air conditioning) system performance Energy. 83: 294-306. DOI: 10.1016/J.Energy.2015.02.024 |
0.624 |
|
2015 |
Zeng Y, Zhang Z, Kusiak A, Tang F, Wei X. Optimizing wastewater pumping system with data-driven models and a greedy electromagnetism-like algorithm Stochastic Environmental Research and Risk Assessment. DOI: 10.1007/S00477-015-1115-4 |
0.716 |
|
2015 |
Wei X, Kusiak A. Short-term prediction of influent flow in wastewater treatment plant Stochastic Environmental Research and Risk Assessment. 29: 241-249. DOI: 10.1007/S00477-014-0889-0 |
0.616 |
|
2014 |
Zhang Z, Zhou Q, Kusiak A. Optimization of Wind Power and Its Variability With a Computational Intelligence Approach Ieee Transactions On Sustainable Energy. 5: 228-236. DOI: 10.1109/Tste.2013.2281354 |
0.574 |
|
2014 |
Wei X, Xu G, Kusiak A. Modeling and optimization of a chiller plant Energy. 73: 898-907. DOI: 10.1016/J.Energy.2014.06.102 |
0.638 |
|
2014 |
Kusiak A, Xu G, Zhang Z. Minimization of energy consumption in HVAC systems with data-driven models and an interior-point method Energy Conversion and Management. 85: 146-153. DOI: 10.1016/J.Enconman.2014.05.053 |
0.57 |
|
2014 |
Tang F, Kusiak A, Wei X. Modeling and short-term prediction of HVAC system with a clustering algorithm Energy and Buildings. 82: 310-321. DOI: 10.1016/J.Enbuild.2014.07.037 |
0.643 |
|
2014 |
He X, Zhang Z, Kusiak A. Performance optimization of HVAC systems with computational intelligence algorithms Energy and Buildings. 81: 371-380. DOI: 10.1016/J.Enbuild.2014.06.021 |
0.559 |
|
2014 |
Kusiak A, Wei X. Prediction of methane production in wastewater treatment facility: A data-mining approach Annals of Operations Research. 216: 71-81. DOI: 10.1007/S10479-011-1037-6 |
0.679 |
|
2013 |
Kusiak A, Verma A, Wei X. A data-mining approach to predict influent quality. Environmental Monitoring and Assessment. 185: 2197-210. PMID 22684807 DOI: 10.1007/S10661-012-2701-2 |
0.751 |
|
2013 |
Verma A, Zhang Z, Kusiak A. Modeling and Prediction of Gearbox Faults With Data-Mining Algorithms Journal of Solar Energy Engineering. 135. DOI: 10.1115/1.4023516 |
0.723 |
|
2013 |
Kusiak A, Zhang Z, Xu G. Minimization of Wind Farm Operational Cost Based on Data-Driven Models Ieee Transactions On Sustainable Energy. 4: 756-764. DOI: 10.1109/Tste.2013.2246590 |
0.573 |
|
2013 |
Kusiak A, Verma A. Monitoring wind farms with performance curves Ieee Transactions On Sustainable Energy. 4: 192-199. DOI: 10.1109/Tste.2012.2212470 |
0.635 |
|
2013 |
Kusiak A, Wei X, Verma AP, Roz E. Modeling and prediction of rainfall using radar reflectivity data: A data-mining approach Ieee Transactions On Geoscience and Remote Sensing. 51: 2337-2342. DOI: 10.1109/Tgrs.2012.2210429 |
0.755 |
|
2013 |
Muste MV, Bennett DA, Secchi S, Schnoor JL, Kusiak A, Arnold NJ, Mishra SK, Ding D, Rapolu U. End-to-end cyberinfrastructure for decision-making support in watershed management Journal of Water Resources Planning and Management. 139: 565-573. DOI: 10.1061/(Asce)Wr.1943-5452.0000289 |
0.313 |
|
2013 |
Wei X, Kusiak A, Sadat HR. Prediction of Influent Flow Rate: Data-Mining Approach Journal of Energy Engineering. 139: 118-123. DOI: 10.1061/(Asce)Ey.1943-7897.0000103 |
0.635 |
|
2013 |
Kusiak A, Wei X. Optimization of the activated sludge process Journal of Energy Engineering. 139: 12-17. DOI: 10.1061/(Asce)Ey.1943-7897.0000092 |
0.636 |
|
2013 |
Jiang Y, Song Z, Kusiak A. Very short-term wind speed forecasting with Bayesian structural break model Renewable Energy. 50: 637-647. DOI: 10.1016/J.Renene.2012.07.041 |
0.564 |
|
2013 |
Kusiak A, Zeng Y, Zhang Z. Modeling and analysis of pumps in a wastewater treatment plant: A data-mining approach Engineering Applications of Artificial Intelligence. 26: 1643-1651. DOI: 10.1016/J.Engappai.2013.04.001 |
0.547 |
|
2013 |
Verma A, Wei X, Kusiak A. Predicting the total suspended solids in wastewater: A data-mining approach Engineering Applications of Artificial Intelligence. 26: 1366-1372. DOI: 10.1016/J.Engappai.2012.08.015 |
0.742 |
|
2013 |
Kusiak A, Zhang Z, Verma A. Prediction, operations, and condition monitoring in wind energy Energy. 60: 1-12. DOI: 10.1016/J.Energy.2013.07.051 |
0.704 |
|
2013 |
Kusiak A, Zeng Y, Xu G. Minimizing energy consumption of an air handling unit with a computational intelligence approach Energy and Buildings. 60: 355-363. DOI: 10.1016/J.Enbuild.2013.02.006 |
0.378 |
|
2013 |
Zhang Z, Kusiak A, Song Z. Scheduling electric power production at a wind farm European Journal of Operational Research. 224: 227-238. DOI: 10.1016/J.Ejor.2012.07.043 |
0.662 |
|
2012 |
Kusiak A, Wei X. A data-driven model for maximization of methane production in a wastewater treatment plant. Water Science and Technology : a Journal of the International Association On Water Pollution Research. 65: 1116-22. PMID 22378011 DOI: 10.2166/Wst.2012.953 |
0.662 |
|
2012 |
Zhang Z, Kusiak A. Monitoring wind turbine vibration based on SCADA data Journal of Solar Energy Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4005753 |
0.566 |
|
2012 |
Verma A, Kusiak A. Fault monitoring of wind turbine generator brushes: A data-mining approach Journal of Solar Energy Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4005624 |
0.655 |
|
2012 |
Kusiak A, Verma A. A data-mining approach to monitoring wind turbines Ieee Transactions On Sustainable Energy. 3: 150-157. DOI: 10.1109/Tste.2011.2163177 |
0.65 |
|
2012 |
Zhang Z, Verma A, Kusiak A. Fault Analysis and Condition Monitoring of the Wind Turbine Gearbox Ieee Transactions On Energy Conversion. 27: 526-535. DOI: 10.1109/Tec.2012.2189887 |
0.703 |
|
2012 |
Wang L, Singh C, Kusiak A. Guest Editorial Special Section on Integration of Intermittent Renewable Energy Resources Into Power Grid Ieee Systems Journal. 6: 194-195. DOI: 10.1109/Jsyst.2012.2198029 |
0.338 |
|
2012 |
Kusiak A, Verma A. Analyzing bearing faults in wind turbines: A data-mining approach Renewable Energy. 48: 110-116. DOI: 10.1016/J.Renene.2012.04.020 |
0.659 |
|
2012 |
Kusiak A, Zhang Z. Control of wind turbine power and vibration with a data-driven approach Renewable Energy. 43: 73-82. DOI: 10.1016/J.Renene.2011.11.024 |
0.575 |
|
2012 |
Zhang Z, Zeng Y, Kusiak A. Minimizing pump energy in a wastewater processing plant Energy. 47: 505-514. DOI: 10.1016/J.Energy.2012.08.048 |
0.549 |
|
2012 |
Kusiak A, Xu G. Modeling and optimization of HVAC systems using a dynamic neural network Energy. 42: 241-250. DOI: 10.1016/J.Energy.2012.03.063 |
0.384 |
|
2011 |
Engler J, Kusiak A. Modeling an innovation ecosystem with adaptive agents International Journal of Innovation Science. 3: 55-67. DOI: 10.1260/1757-2223.3.2.55 |
0.759 |
|
2011 |
Kusiak A, Verma A. Prediction of status patterns of wind turbines: A data-mining approach Journal of Solar Energy Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4003188 |
0.659 |
|
2011 |
Kusiak A, Zhang Z. Adaptive control of a wind turbine with data mining and swarm intelligence Ieee Transactions On Sustainable Energy. 2: 28-36. DOI: 10.1109/Tste.2010.2072967 |
0.57 |
|
2011 |
Kusiak A, Verma A. A data-driven approach for monitoring blade pitch faults in wind turbines Ieee Transactions On Sustainable Energy. 2: 87-96. DOI: 10.1109/Tste.2010.2066585 |
0.663 |
|
2011 |
Zhang Z, Kusiak A. Models for optimization of energy consumption of pumps in a wastewater processing plant Journal of Energy Engineering. 137: 159-168. DOI: 10.1061/(Asce)Ey.1943-7897.0000051 |
0.562 |
|
2011 |
Kusiak A, Zheng H, Zhang Z. Virtual Wind Speed Sensor for Wind Turbines Journal of Energy Engineering. 137: 59-69. DOI: 10.1061/(Asce)Ey.1943-7897.0000035 |
0.54 |
|
2011 |
Kusiak A, Li W. The prediction and diagnosis of wind turbine faults Renewable Energy. 36: 16-23. DOI: 10.1016/J.Renene.2010.05.014 |
0.321 |
|
2011 |
Song Z, Geng X, Kusiak A, Xu C. Mining Markov chain transition matrix from wind speed time series data Expert Systems With Applications. 38: 10229-10239. DOI: 10.1016/J.Eswa.2011.02.063 |
0.548 |
|
2011 |
Kusiak A, Xu G, Tang F. Optimization of an HVAC system with a strength multi-objective particle-swarm algorithm Energy. 36: 5935-5943. DOI: 10.1016/J.Energy.2011.08.024 |
0.37 |
|
2011 |
Kusiak A, Tang F, Xu G. Multi-objective optimization of HVAC system with an evolutionary computation algorithm Energy. 36: 2440-2449. DOI: 10.1016/J.Energy.2011.01.030 |
0.392 |
|
2010 |
Shah S, Kusiak A. Relabeling algorithm for retrieval of noisy instances and improving prediction quality. Computers in Biology and Medicine. 40: 288-99. PMID 20097331 DOI: 10.1016/J.Compbiomed.2009.12.005 |
0.601 |
|
2010 |
Song Z, Kusiak A. Multiobjective optimization of temporal processes. Ieee Transactions On Systems, Man, and Cybernetics. Part B, Cybernetics : a Publication of the Ieee Systems, Man, and Cybernetics Society. 40: 845-56. PMID 19900853 DOI: 10.1109/TSMCB.2009.2030667 |
0.509 |
|
2010 |
Engler J, Kusiak A. Mining authoritativeness of collaborative innovation partners International Journal of Computers, Communications and Control. 5: 42-51. DOI: 10.15837/Ijccc.2010.1.2463 |
0.771 |
|
2010 |
Kusiak A, Zhang Z. Analysis of wind turbine vibrations based on SCADA data Journal of Solar Energy Engineering, Transactions of the Asme. 132: 0310081-03100812. DOI: 10.1115/1.4001461 |
0.547 |
|
2010 |
Kusiak A, Zhang Z, Li M. Optimization of Wind Turbine Performance With Data-Driven Models Ieee Transactions On Sustainable Energy. 1: 66-76. DOI: 10.1109/Tste.2010.2046919 |
0.564 |
|
2010 |
Kusiak A, Zhang Z. Short-horizon prediction of wind power: A data-driven approach Ieee Transactions On Energy Conversion. 25: 1112-1122. DOI: 10.1109/Tec.2010.2043436 |
0.567 |
|
2010 |
Kusiak A, Li W. Virtual models for prediction of wind turbine parameters Ieee Transactions On Energy Conversion. 25: 245-252. DOI: 10.1109/Tec.2009.2033042 |
0.414 |
|
2010 |
Da Cunha C, Agard B, Kusiak A. Selection of modules for mass customisation International Journal of Production Research. 48: 1439-1454. DOI: 10.1080/00207540802473989 |
0.326 |
|
2010 |
Kusiak A, Li W. Short-term prediction of wind power with a clustering approach Renewable Energy. 35: 2362-2369. DOI: 10.1016/J.Renene.2010.03.027 |
0.363 |
|
2010 |
Kusiak A, Song Z. Design of wind farm layout for maximum wind energy capture Renewable Energy. 35: 685-694. DOI: 10.1016/J.Renene.2009.08.019 |
0.562 |
|
2010 |
Kusiak A, Zheng H, Song Z. Power optimization of wind turbines with data mining and evolutionary computation Renewable Energy. 35: 695-702. DOI: 10.1016/J.Renene.2009.08.018 |
0.573 |
|
2010 |
Kusiak A, Li W, Song Z. Dynamic control of wind turbines Renewable Energy. 35: 456-463. DOI: 10.1016/J.Renene.2009.05.022 |
0.569 |
|
2010 |
Kusiak A, Li W. Estimation of wind speed: A data-driven approach Journal of Wind Engineering and Industrial Aerodynamics. 98: 559-567. DOI: 10.1016/J.Jweia.2010.04.010 |
0.346 |
|
2010 |
Kusiak A, Li M. Reheat optimization of the variable-air-volume box Energy. 35: 1997-2005. DOI: 10.1016/J.Energy.2010.01.014 |
0.411 |
|
2010 |
Kusiak A, Zheng H. Optimization of wind turbine energy and power factor with an evolutionary computation algorithm Energy. 35: 1324-1332. DOI: 10.1016/J.Energy.2009.11.015 |
0.373 |
|
2010 |
Song Z, Kusiak A. Mining Pareto-optimal modules for delayed product differentiation European Journal of Operational Research. 201: 123-128. DOI: 10.1016/J.Ejor.2009.02.013 |
0.54 |
|
2010 |
Kusiak A, Li M, Tang F. Modeling and optimization of HVAC energy consumption Applied Energy. 87: 3092-3102. DOI: 10.1016/J.Apenergy.2010.04.008 |
0.369 |
|
2010 |
Kusiak A, Li M, Zheng H. Virtual models of indoor-air-quality sensors Applied Energy. 87: 2087-2094. DOI: 10.1016/J.Apenergy.2009.12.008 |
0.365 |
|
2010 |
Kusiak A, Li M, Zhang Z. A data-driven approach for steam load prediction in buildings Applied Energy. 87: 925-933. DOI: 10.1016/J.Apenergy.2009.09.004 |
0.576 |
|
2010 |
Kusiak A, Li M. Cooling output optimization of an air handling unit Applied Energy. 87: 901-909. DOI: 10.1016/J.Apenergy.2009.06.010 |
0.405 |
|
2009 |
Zheng H, Kusiak A. Prediction of wind farm power ramp rates: A data-mining approach Journal of Solar Energy Engineering, Transactions of the Asme. 131: 0310111-0310118. DOI: 10.1115/1.3142727 |
0.425 |
|
2009 |
Song Z, Kusiak A. Optimization of temporal processes: A model predictive control approach Ieee Transactions On Evolutionary Computation. 13: 169-179. DOI: 10.1109/Tevc.2008.920680 |
0.605 |
|
2009 |
Kusiak A, Song Z, Zheng H. Anticipatory Control of Wind Turbines With Data-Driven Predictive Models Ieee Transactions On Energy Conversion. 24: 766-774. DOI: 10.1109/Tec.2009.2025320 |
0.592 |
|
2009 |
Kusiak A, Zheng H, Song Z. Short-Term Prediction of Wind Farm Power: A Data Mining Approach Ieee Transactions On Energy Conversion. 24: 125-136. DOI: 10.1109/Tec.2008.2006552 |
0.587 |
|
2009 |
Song Z, Kusiak A. Optimising product configurations with a data-mining approach International Journal of Production Research. 47: 1733-1751. DOI: 10.1080/00207540701644235 |
0.552 |
|
2009 |
Kusiak A, Song Z. Sensor fault detection in power plants Journal of Energy Engineering. 135: 127-137. DOI: 10.1061/(Asce)0733-9402(2009)135:4(127) |
0.536 |
|
2009 |
Kusiak A, Zheng H, Song Z. On-line monitoring of power curves Renewable Energy. 34: 1487-1493. DOI: 10.1016/J.Renene.2008.10.022 |
0.561 |
|
2009 |
Kusiak A, Zheng H, Song Z. Models for monitoring wind farm power Renewable Energy. 34: 583-590. DOI: 10.1016/J.Renene.2008.05.032 |
0.583 |
|
2009 |
Kusiak A. Innovation: A data-driven approach International Journal of Production Economics. 122: 440-448. DOI: 10.1016/J.Ijpe.2009.06.025 |
0.325 |
|
2009 |
Kusiak A, Li M. Optimal decision making in ventilation control Energy. 34: 1835-1845. DOI: 10.1016/J.Energy.2009.07.039 |
0.34 |
|
2009 |
Kusiak A, Zheng H, Song Z. Wind farm power prediction: a data-mining approach Wind Energy. 12: 275-293. DOI: 10.1002/We.295 |
0.575 |
|
2008 |
Engler J, Kusiak A. Web mining for innovation Mechanical Engineering. 130. DOI: 10.1115/1.2008-Nov-1 |
0.763 |
|
2008 |
Kusiak A, Song Z. Clustering-based performance optimization of the boiler-turbine system Ieee Transactions On Energy Conversion. 23: 651-658. DOI: 10.1109/Tec.2007.914183 |
0.58 |
|
2008 |
Kusiak A, Zheng H. Data mining for prediction of wind farm power ramp rates 2008 Ieee International Conference On Sustainable Energy Technologies, Icset 2008. 1099-1103. DOI: 10.1109/ICSET.2008.4747170 |
0.314 |
|
2007 |
Shah S, Kusiak A. Cancer gene search with data-mining and genetic algorithms. Computers in Biology and Medicine. 37: 251-61. PMID 16616736 DOI: 10.1016/J.Compbiomed.2006.01.007 |
0.584 |
|
2007 |
Kusiak A. Innovation science: A primer International Journal of Computer Applications in Technology. 28: 140-149. DOI: 10.1504/Ijcat.2007.013351 |
0.329 |
|
2007 |
Kusiak A, Smith MR, Song Z. Planning Product Configurations Based on Sales Data Ieee Transactions On Systems, Man and Cybernetics, Part C (Applications and Reviews). 37: 602-609. DOI: 10.1109/TSMCC.2007.897503 |
0.476 |
|
2007 |
Song Z, Kusiak A. Constraint-based control of boiler efficiency: A data-mining approach Ieee Transactions On Industrial Informatics. 3: 73-83. DOI: 10.1109/Tii.2006.890530 |
0.533 |
|
2007 |
Da Cunha C, Agard B, Kusiak A. Design for cost: Module-based mass customization Ieee Transactions On Automation Science and Engineering. 4: 350-359. DOI: 10.1109/Tase.2006.887160 |
0.373 |
|
2007 |
Kusiak A. Innovation: The living laboratory perspective Computer-Aided Design and Applications. 4: 863-876. DOI: 10.1080/16864360.2007.10738518 |
0.339 |
|
2006 |
Kusiak A, Caldarone CA, Kelleher MD, Lamb FS, Persoon TJ, Burns A. Hypoplastic left heart syndrome: knowledge discovery with a data mining approach. Computers in Biology and Medicine. 36: 21-40. PMID 16324907 DOI: 10.1016/J.Compbiomed.2004.07.007 |
0.324 |
|
2006 |
Shah SC, Kusiak A, O'Donnell MA. Patient-recognition data-mining model for BCG-plus interferon immunotherapy bladder cancer treatment. Computers in Biology and Medicine. 36: 634-55. PMID 15978568 DOI: 10.1016/J.Compbiomed.2005.03.007 |
0.546 |
|
2006 |
Harding JA, Shahbaz M, Srinivas, Kusiak A. Data Mining in Manufacturing: A Review Journal of Manufacturing Science and Engineering-Transactions of the Asme. 128: 969-976. DOI: 10.1115/1.2194554 |
0.39 |
|
2006 |
Kusiak A, Song Z. Combustion efficiency optimization and virtual testing: A data-mining approach Ieee Transactions On Industrial Informatics. 2: 176-184. DOI: 10.1109/Tii.2006.873598 |
0.544 |
|
2006 |
Kusiak A, Shah S. Data-mining-based system for prediction of water chemistry faults Ieee Transactions On Industrial Electronics. 53: 593-603. DOI: 10.1109/Tie.2006.870706 |
0.577 |
|
2006 |
Feng CJ, Yu Z(, Kusiak A. Selection and validation of predictive regression and neural network models based on designed experiments Iie Transactions. 38: 13-23. DOI: 10.1080/07408170500346378 |
0.371 |
|
2006 |
Feng JCX, Kusiak A. Data mining applications in engineering design, manufacturing and logistics International Journal of Production Research. 44: 2689-2694. DOI: 10.1080/00207540600681072 |
0.318 |
|
2006 |
Da Cunha C, Agard B, Kusiak A. Data mining for improvement of product quality International Journal of Production Research. 44: 4027-4041. DOI: 10.1080/00207540600678904 |
0.33 |
|
2006 |
Kusiak A. Data mining: Manufacturing and service applications International Journal of Production Research. 44: 4175-4191. DOI: 10.1080/00207540600632216 |
0.378 |
|
2006 |
Kusiak A. Data Mining in Design of Products and Production Systems Information Control Problems in Manufacturing 2006. 49-53. DOI: 10.1016/J.Arcontrol.2007.03.003 |
0.39 |
|
2005 |
Kusiak A, Dixon B, Shah S. Predicting survival time for kidney dialysis patients: a data mining approach. Computers in Biology and Medicine. 35: 311-27. PMID 15749092 DOI: 10.1016/J.Compbiomed.2004.02.004 |
0.575 |
|
2005 |
Kusiak A, Burns A, Milster F. Optimizing combustion efficiency of a circulating fluidized boiler: A data mining approach International Journal of Knowledge-Based and Intelligent Engineering Systems. 9: 263-274. DOI: 10.3233/Kes-2005-9402 |
0.379 |
|
2005 |
Kusiak A. Selection of invariant objects with a data-mining approach Ieee Transactions On Electronics Packaging Manufacturing. 28: 187-196. DOI: 10.1109/Tepm.2005.846832 |
0.326 |
|
2005 |
Park K, Kusiak A. Enterprise resource planning (ERP) operations support system for maintaining process integration International Journal of Production Research. 43: 3959-3982. DOI: 10.1080/00207540500140799 |
0.307 |
|
2005 |
KUSIAK A, BURNS A, SHAH S, NOVOTNY N. DETECTION OF EVENTS CAUSING PLUGGAGE OF A COAL-FIRED BOILER: A DATA MINING APPROACH Combustion Science and Technology. 177: 2327-2348. DOI: 10.1080/00102200500241115 |
0.595 |
|
2004 |
Shah SC, Kusiak A. Data mining and genetic algorithm based gene/SNP selection. Artificial Intelligence in Medicine. 31: 183-96. PMID 15302085 DOI: 10.1016/J.Artmed.2004.04.002 |
0.535 |
|
2004 |
Agard B, Kusiak A. Data mining for subassembly selection Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 627-631. DOI: 10.1115/1.1763182 |
0.441 |
|
2004 |
Agard B, Kusiak A. Data-mining-based methodology for the design of product families International Journal of Production Research. 42: 2955-2969. DOI: 10.1080/00207540410001691929 |
0.359 |
|
2003 |
Shah S, Kusiak A, Dixon B. Data mining in predicting survival of kidney dialysis patients Biomedical Optics. 4949: 73-79. DOI: 10.1117/12.476387 |
0.562 |
|
2003 |
Kusiak A, Shah S, Dixon B. Data mining based decision-making approach for predicting survival of kidney dialysis patients Ifac Proceedings Volumes. 36: 35-39. DOI: 10.1016/S1474-6670(17)33468-7 |
0.581 |
|
2002 |
Kusiak A. A data mining approach for generation of control signatures Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 923-926. DOI: 10.1115/1.1511524 |
0.411 |
|
2002 |
Kusiak A. Integrated product and process design: A modularity perspective Journal of Engineering Design. 13: 223-231. DOI: 10.1080/09544820110108926 |
0.344 |
|
2001 |
Kusiak A. Decomposition in data mining: A medical case study Proceedings of Spie - the International Society For Optical Engineering. 4384: 267-278. DOI: 10.1117/12.421082 |
0.306 |
|
2001 |
Kusiak A. Rough set theory: A data mining tool for semiconductor manufacturing Ieee Transactions On Electronics Packaging Manufacturing. 24: 44-50. DOI: 10.1109/6104.924792 |
0.386 |
|
2001 |
He D, Babayan A, Kusiak A. Scheduling manufacturing systems in an agile environment Robotics and Computer-Integrated Manufacturing. 17: 87-97. DOI: 10.1016/S0736-5845(00)00041-7 |
0.362 |
|
2001 |
Zakarian A, Kusiak A. Process analysis and reengineering Computers and Industrial Engineering. 41: 135-150. DOI: 10.1016/S0360-8352(01)00048-1 |
0.343 |
|
2000 |
Feng CX, Kusiak A. Robust tolerance synthesis with the design of experiments approach Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 520-528. DOI: 10.1115/1.1285860 |
0.358 |
|
2000 |
Kusiak A. Decomposition in data mining: an industrial case study Ieee Transactions On Electronics Packaging Manufacturing. 23: 238. DOI: 10.1109/6104.895081 |
0.372 |
|
2000 |
Zakarian A, Kusiak A. Analysis of process models Ieee Transactions On Electronics Packaging Manufacturing. 23: 137-147. DOI: 10.1109/6104.846937 |
0.382 |
|
2000 |
He DW, Strege B, Tolle H, Kusiak A. Decomposition in automatic generation of Petri nets for manufacturing system control and scheduling International Journal of Production Research. 38: 1437-1457. DOI: 10.1080/002075400188942 |
0.393 |
|
2000 |
Al-Hakim L, Kusiak A, Mathew J. A graph-theoretic approach to conceptual design with functional perspectives Computer-Aided Design. 32: 867-875. DOI: 10.1016/S0010-4485(00)00075-0 |
0.302 |
|
1999 |
Huang CC, Kusiak A. Synthesis of modular mechatronic products: a testability perspective Ieee/Asme Transactions On Mechatronics. 4: 119-132. DOI: 10.1109/3516.769539 |
0.315 |
|
1999 |
Zakarian A, Kusiak A. Forming teams: an analytical approach Iie Transactions (Institute of Industrial Engineers). 31: 85-97. DOI: 10.1023/A:1007580823003 |
0.365 |
|
1999 |
Kusiak A, Zakarian A. Fuzzy analysis of process models Ifac Proceedings Volumes. 32: 171-176. DOI: 10.1016/S1474-6670(17)56031-0 |
0.357 |
|
1998 |
Huang CC, Kusiak A. Manufacturing control with a push-pull approach International Journal of Production Research. 36: 251-275. DOI: 10.1080/002075498194038 |
0.391 |
|
1998 |
Kusiak A, He DW. Design for agility: A scheduling perspective Robotics and Computer-Integrated Manufacturing. 14: 415-427. DOI: 10.1016/S0736-5845(98)00017-9 |
0.353 |
|
1998 |
He D, Kusiak A, Tseng TL. Delayed product differentiation: A design and manufacturing perspective Cad Computer Aided Design. 30: 105-113. DOI: 10.1016/S0010-4485(97)00045-6 |
0.326 |
|
1997 |
Feng CX, Kusiak A. Robust tolerance design with the integer programming approach Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 603-610. DOI: 10.1115/1.2831193 |
0.339 |
|
1997 |
Feng CX, Kusiak A, Huang CC. Scheduling models for setup reduction Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 571-579. DOI: 10.1115/1.2831189 |
0.334 |
|
1997 |
Kusiak A, Huang C. Design of modular digital circuits for testability Ieee Transactions On Components, Packaging, and Manufacturing Technology: Part C. 20: 48-57. DOI: 10.1109/3476.585144 |
0.306 |
|
1997 |
Kusiak A, Letsche T, Zakarian A. Data modelling with IDEF1x International Journal of Computer Integrated Manufacturing. 10: 470-486. DOI: 10.1080/095119297131039 |
0.76 |
|
1997 |
Kusiak A, He DW. Design for agile assembly: An operational perspective International Journal of Production Research. 35: 157-178. DOI: 10.1080/002075497196037 |
0.334 |
|
1996 |
Larson N, Kusiak A. System reliability methods for analysis of process models Integrated Computer-Aided Engineering. 3: 279-290. DOI: 10.3233/Ica-1996-3405 |
0.377 |
|
1996 |
Kusiak A, Wang J, He DW. Negotiation in constraint-based design Journal of Mechanical Design, Transactions of the Asme. 118: 470-477. DOI: 10.1115/1.2826914 |
0.33 |
|
1996 |
Kusiak A, Huang CC. Development of modular products Ieee Transactions On Components Packaging and Manufacturing Technology Part A. 19: 523-538. DOI: 10.1109/95.554934 |
0.35 |
|
1996 |
Kusiak A, Zakarian A. Reliability evaluation of process models Ieee Transactions On Components Packaging and Manufacturing Technology Part A. 19: 268-275. DOI: 10.1109/95.506113 |
0.379 |
|
1996 |
Huang CC, Kusiak A. Overview of Kanban systems International Journal of Computer Integrated Manufacturing. 9: 169-189. DOI: 10.1080/095119296131643 |
0.308 |
|
1996 |
David WHE, Kusiak A, Artiba A. A scheduling problem in glass manufacturing Iie Transactions (Institute of Industrial Engineers). 28: 129-139. DOI: 10.1080/07408179608966258 |
0.331 |
|
1996 |
Belhe U, Kusiak A. The house of quality in a design process International Journal of Production Research. 34: 2119-2131. DOI: 10.1080/00207549608905017 |
0.318 |
|
1996 |
Kusiak A, Lee H. Neural computing-based design of components for cellular manufacturing International Journal of Production Research. 34: 1777-1790. DOI: 10.1080/00207549608904997 |
0.333 |
|
1996 |
He DW, Kusiak A. Performance analysis of modular products International Journal of Production Research. 34: 253-272. DOI: 10.1080/00207549608904900 |
0.363 |
|
1996 |
Kusiak A, Zakarian A. Risk assessment of process models Computers and Industrial Engineering. 30: 599-610. DOI: 10.1016/0360-8352(95)00178-6 |
0.339 |
|
1996 |
Feng CX, Kusiak A, Huang CC. Cost evaluation in design with form features Cad Computer Aided Design. 28: 879-885. DOI: 10.1016/0010-4485(96)00009-7 |
0.315 |
|
1995 |
Kusiak A, Larson N. Decomposition and representation methods in mechanical design Journal of Mechanical Design, Transactions of the Asme. 117: 17-24. DOI: 10.1115/1.2836453 |
0.317 |
|
1995 |
Vujosevic R, Kusiak A, Szczerbicki E. Reason maintenance in product modeling Journal of Engineering For Industry. 117: 223-231. DOI: 10.1115/1.2803298 |
0.362 |
|
1995 |
Kusiak A, Wang JR, He DW, Feng CX. A Structured Approach for Analysis of Design Processes Ieee Transactions On Components Packaging and Manufacturing Technology Part A. 18: 664-673. DOI: 10.1109/95.465167 |
0.325 |
|
1995 |
Larson N, Kusiak A. Work-in-process space allocation: A model and an industrial application Iie Transactions (Institute of Industrial Engineers). 27: 497-506. DOI: 10.1080/07408179508936766 |
0.327 |
|
1995 |
Kusiak A. Loading models in flexible manufacturing systems Manufacturing Research and Technology. 23: 141-156. DOI: 10.1016/S1572-4417(06)80008-2 |
0.344 |
|
1995 |
Feng CX, Kusiak A. Constraint-based design of parts Computer-Aided Design. 27: 343-352. DOI: 10.1016/0010-4485(95)96798-Q |
0.312 |
|
1995 |
Kusiak A, Feng CX. Deterministic tolerance synthesis: a comparative study Computer-Aided Design. 27: 759-768. DOI: 10.1016/0010-4485(94)00028-C |
0.305 |
|
1994 |
Hargrove SK, Kusiak A. Computer-aided fixture design: A review International Journal of Production Research. 32: 733-753. DOI: 10.1080/00207549408956967 |
0.331 |
|
1994 |
Kusiak A, He W. Design of components for schedulability European Journal of Operational Research. 76: 49-59. DOI: 10.1016/0377-2217(94)90005-1 |
0.327 |
|
1994 |
Kusiak A, Nick Larson T, Wang J(. Reengineering of design and manufacturing processes Computers and Industrial Engineering. 26: 521-536. DOI: 10.1016/0360-8352(94)90048-5 |
0.404 |
|
1994 |
Kusiak A, Wang J. Negotiation in engineering design Group Decision and Negotiation. 3: 69-91. DOI: 10.1007/Bf01441956 |
0.323 |
|
1993 |
Kusiak A, Boe WJ, Cheng C. Designing cellular manufacturing systems: Branch-and-bound and a∗ approaches Iie Transactions (Institute of Industrial Engineers). 25: 46-56. DOI: 10.1080/07408179308964303 |
0.369 |
|
1993 |
Kusiak A, Szczerbicki E. Transformation from conceptual to embodiment design Iie Transactions (Institute of Industrial Engineers). 25: 6-12. DOI: 10.1080/07408179308964299 |
0.305 |
|
1993 |
Kusiak A, Wang J. Efficient organizing of design activities International Journal of Production Research. 31: 753-769. DOI: 10.1080/00207549308956755 |
0.312 |
|
1993 |
Belhe U, Kusiak A. Performance Analysis of Design Process Using Timed Petri Nets Concurrent Engineering. 1: 147-152. DOI: 10.1016/S1474-6670(17)49462-6 |
0.318 |
|
1992 |
Kusiak A, Cho M. Similarity coefficient algorithms for solving the group technology problem International Journal of Production Research. 30: 2633-2646. DOI: 10.1080/00207549208948181 |
0.349 |
|
1992 |
Vujosevic R, Kusiak A. Selection of machinable volumes: an object-oriented approach Expert Systems With Applications. 4: 273-283. DOI: 10.1016/0957-4174(92)90063-X |
0.313 |
|
1992 |
Kusiak A, Ahn J. Intelligent scheduling of automated machining systems Computer Integrated Manufacturing Systems. 5: 3-14. DOI: 10.1016/0951-5240(92)90013-3 |
0.351 |
|
1992 |
He W, Kusiak A. Scheduling manufacturing systems Computers in Industry. 20: 163-175. DOI: 10.1016/0166-3615(92)90050-W |
0.347 |
|
1991 |
Kusiak A, Szczerbicki E, Park K. A novel approach to decomposition of design specifications and search for solutions International Journal of Production Research. 29: 1391-1406. DOI: 10.1080/00207549108948018 |
0.314 |
|
1991 |
Kusiak A. Process Planning: A Knowledge-Based and Optimization Perspective Ieee Transactions On Robotics and Automation. 7: 257-266. DOI: 10.1016/S1474-6670(17)54338-4 |
0.341 |
|
1991 |
Cheng C, Kusiak A, Boe WJ. A Branch-and-Bound Algorithm for Solving the Machine Allocation Problem Control and Dynamic Systems. 47: 399-419. DOI: 10.1016/B978-0-12-012747-4.50017-2 |
0.304 |
|
1991 |
Heragu SS, Kusiak A. Efficient models for the facility layout problem European Journal of Operational Research. 53: 1-13. DOI: 10.1016/0377-2217(91)90088-D |
0.639 |
|
1991 |
Kusiak A. Branching algorithms for solving the group technology problem Journal of Manufacturing Systems. 10: 332-343. DOI: 10.1016/0278-6125(91)90028-Z |
0.346 |
|
1990 |
Kusiak A. Optimal selection of machinable volumes Iie Transactions (Institute of Industrial Engineers). 22: 151-160. DOI: 10.1080/07408179008964167 |
0.337 |
|
1990 |
Heragu SS, Kusiak A. Machine layout: An optimization and knowledge-based approach International Journal of Production Research. 28: 615-635. DOI: 10.1080/00207549008942744 |
0.623 |
|
1990 |
Kusiak A. KBSS: A knowledge-based system for scheduling in automated manufacturing Mathematical and Computer Modelling. 13: 37-55. DOI: 10.1016/0895-7177(90)90369-X |
0.392 |
|
1990 |
Kusiak A. Manufacturing systems: A knowledge- and optimization-based approach Journal of Intelligent and Robotic Systems. 3: 27-50. DOI: 10.1007/Bf00368971 |
0.35 |
|
1989 |
Kusiak A, Heragu SS. Expert Systems and Optimization Ieee Transactions On Software Engineering. 15: 1017-1020. DOI: 10.1109/32.31358 |
0.623 |
|
1988 |
Heragu SS, Kusiak A. Machine Layout Problem in Flexible Manufacturing Systems Operations Research. 36: 258-268. DOI: 10.1287/Opre.36.2.258 |
0.628 |
|
1988 |
Kusiak A, Heragu SS. Computer Integrated Manufacturing: A Structural Perspective Ieee Network. 2: 14-22. DOI: 10.1109/65.3269 |
0.61 |
|
1988 |
Kusiak A, Chen M. Technical note: A Model of the m Machine n Job Scheduling Problem Engineering Optimization. 14: 153-156. DOI: 10.1080/03052158808941208 |
0.31 |
|
1988 |
Kusiak A. EXGT-s: A knowledge based system for group technology International Journal of Production Research. 26: 887-904. DOI: 10.1080/00207548808947908 |
0.37 |
|
1988 |
Kusiak A, Chen M. Expert systems for planning and scheduling manufacturing systems European Journal of Operational Research. 34: 113-130. DOI: 10.1016/0377-2217(88)90346-3 |
0.315 |
|
1988 |
Kusiak A, Heragu SS. KBSES: A knowledge-based system for equipment selection The International Journal of Advanced Manufacturing Technology. 3: 97-109. DOI: 10.1007/Bf02601593 |
0.654 |
|
1988 |
Kusiak A. Scheduling flexible machining and assembly systems Annals of Operations Research. 15: 337-352. DOI: 10.1007/Bf02186802 |
0.359 |
|
1987 |
Kusiak A. Artificial Intelligence And Operations Research In Flexible Manufacturing Systems Infor: Information Systems and Operational Research. 25: 2-12. DOI: 10.1080/03155986.1987.11732024 |
0.343 |
|
1987 |
Kusiak A. Modelling Flexible Manufacturing Systems Infor: Information Systems and Operational Research. 25: 1-1. DOI: 10.1080/03155986.1987.11732023 |
0.327 |
|
1987 |
Kusiak A, Finke G. Modeling and solving the flexible forging module scheduling problem Engineering Optimization. 12: 1-12. DOI: 10.1080/03052158708941080 |
0.337 |
|
1987 |
Kusiak A. The generalized group technology concept International Journal of Production Research. 25: 561-569. DOI: 10.1080/00207548708919861 |
0.332 |
|
1987 |
Kusiak A. The production equipment requirements problem International Journal of Production Research. 25: 319-325. DOI: 10.1080/00207548708919843 |
0.381 |
|
1987 |
Kusiak A, Heragu SS. The facility layout problem European Journal of Operational Research. 29: 229-251. DOI: 10.1016/0377-2217(87)90238-4 |
0.61 |
|
1987 |
Kusiak A, Chow WS. Efficient solving of the group technology problem Journal of Manufacturing Systems. 6: 117-124. DOI: 10.1016/0278-6125(87)90035-5 |
0.347 |
|
1987 |
Kusiak A, Heragu SS. Group technology Computers in Industry. 9: 83-91. DOI: 10.1016/0166-3615(87)90002-9 |
0.562 |
|
1987 |
Kusiak A, Finke G. Hierarchical approach to the process planning problem Discrete Applied Mathematics. 18: 175-184. DOI: 10.1016/0166-218X(87)90019-9 |
0.338 |
|
1987 |
Finke G, Kusiak A. Models for the process planning problem in flexible manufacturing systems The International Journal of Advanced Manufacturing Technology. 2: 3-12. DOI: 10.1007/Bf02601472 |
0.349 |
|
1986 |
Kusiak A. Efficient implementation of johnson’s scheduling algorithm Iie Transactions (Institute of Industrial Engineers). 18: 215-216. DOI: 10.1080/07408178608975349 |
0.316 |
|
1986 |
Ravi Kumar K, Kusiak A, Vannelli A. Grouping of parts and components in flexible manufacturing systems European Journal of Operational Research. 24: 387-397. DOI: 10.1016/0377-2217(86)90032-9 |
0.351 |
|
1986 |
Kusiak A. Application of operational research models and techniques in flexible manufacturing systems European Journal of Operational Research. 24: 336-345. DOI: 10.1016/0377-2217(86)90027-5 |
0.35 |
|
1985 |
Kusiak A. Flexible manufacturing systems a structural approach International Journal of Production Research. 23: 1057-1073. DOI: 10.1080/00207548508904765 |
0.337 |
|
1985 |
Kusiak A, Vannelli A, Kumar KR. Grouping Problem in Scheduling Flexible Manufacturing Systems Robotica. 3: 245-252. DOI: 10.1017/S0263574700002344 |
0.325 |
|
1985 |
Kusiak A. Planning of Flexible Manufacturing Systems Robotica. 3: 229-232. DOI: 10.1017/S0263574700002320 |
0.343 |
|
1985 |
Kusiak A. Integer programming approach to process planning The International Journal of Advanced Manufacturing Technology. 1: 73-83. DOI: 10.1007/Bf02601583 |
0.367 |
|
1985 |
Kusiak A. The part families problem in flexible manufacturing systems Annals of Operations Research. 3: 277-300. DOI: 10.1007/Bf02023710 |
0.334 |
|
Show low-probability matches. |