Year |
Citation |
Score |
2020 |
Bawane K, Lu K, Li Q, Bordia R. High temperature oxidation behaviors of SiON coated AISI 441 in Ar + O2, Ar+H2O, and Ar + CO2 atmospheres Corrosion Science. 166: 108429. DOI: 10.1016/J.Corsci.2020.108429 |
0.399 |
|
2020 |
Gangadhar J, Maheshwari A, Bordia RK, Kumar CNS, Kubel C, Sujith R. Role of carbon on the thermal and electrical properties of graphene- enriched silicon oxycarbides Ceramics International. DOI: 10.1016/J.Ceramint.2020.07.314 |
0.369 |
|
2020 |
Hong Y, Chen Z, Lei J, Zhang Z, Xiao H, Kornev KG, Bordia RK, Tong J, Peng F. Direct inkjet printing of mullite nano-ribbons from the sol–gel precursor Journal of Sol-Gel Science and Technology. 95: 66-76. DOI: 10.1007/S10971-020-05301-3 |
0.332 |
|
2019 |
Barroso G, Li Q, Bordia RK, Motz G. Polymeric and ceramic silicon-based coatings – a review Journal of Materials Chemistry A. 7: 1936-1963. DOI: 10.1039/C8Ta09054H |
0.391 |
|
2019 |
Wang K, Bordia RK, Brush LN. A semi-empirical power-law model for the dip-coating of a substrate into a particle-containing, non-Newtonian, complex fluid system Ceramics International. 45: 6655-6664. DOI: 10.1016/J.Ceramint.2018.12.154 |
0.582 |
|
2019 |
Torresani E, Giuntini D, Zhu C, Harrington T, Vecchio KS, Molinari A, Bordia RK, Olevsky EA. Anisotropy of Mass Transfer During Sintering of Powder Materials with Pore–Particle Structure Orientation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 1033-1049. DOI: 10.1007/S11661-018-5037-X |
0.314 |
|
2018 |
Wang K, Zhang F, Bordia RK. FEM Modeling of In-Plane Stress Distribution in Thick Brittle Coatings/Films on Ductile Substrates Subjected to Tensile Stress to Determine Interfacial Strength. Materials (Basel, Switzerland). 11. PMID 29584647 DOI: 10.3390/Ma11040497 |
0.59 |
|
2018 |
Shang H, Olevsky EA, Bordia RK. Stress‐induced anisotropy during sintering of hierarchical porosity ceramics Journal of the American Ceramic Society. 102: 768-777. DOI: 10.1111/Jace.16148 |
0.342 |
|
2018 |
Giuntini D, Bordia RK, Olevsky EA. Feasibility of in situ de‐agglomeration during powder consolidation Journal of the American Ceramic Society. 102: 628-643. DOI: 10.1111/Jace.15899 |
0.334 |
|
2018 |
Lichtner A, Roussel D, Röhrens D, Jauffres D, Villanova J, Martin CL, Bordia RK. Anisotropic sintering behavior of freeze-cast ceramics by optical dilatometry and discrete-element simulations Acta Materialia. 155: 343-349. DOI: 10.1016/J.Actamat.2018.06.001 |
0.305 |
|
2018 |
Jauffrès D, Martin CL, Bordia RK. Design of strain tolerant porous microstructures – A case for controlled imperfection Acta Materialia. 148: 193-201. DOI: 10.1016/J.Actamat.2017.12.039 |
0.308 |
|
2017 |
Konegger T, Peterlik H, Bordia RK. Micro-/Mesoporous Polymer-Derived Ceramic Structures Using Molecular Porogens Key Engineering Materials. 742: 310-316. DOI: 10.4028/Www.Scientific.Net/Kem.742.310 |
0.356 |
|
2017 |
Bordia RK, Kang SL, Olevsky EA. Current understanding and future research directions at the onset of the next century of sintering science and technology Journal of the American Ceramic Society. 100: 2314-2352. DOI: 10.1111/Jace.14919 |
0.371 |
|
2017 |
Ahmed Y, Zaki Z, Besisa D, Amin A, Bordia R. Effect of zirconia and iron on the mechanical properties of Al2O3/TiC composites processed using combined self-propagating synthesis and direct consolidation technique Materials Science and Engineering: A. 696: 182-189. DOI: 10.1016/J.Msea.2017.04.059 |
0.357 |
|
2017 |
Peng Y, Wang K, Yu M, Li A, Bordia RK. An optimized process for in situ formation of multi-walled carbon nanotubes in templated pores of polymer-derived silicon oxycarbide Ceramics International. 43: 3854-3860. DOI: 10.1016/J.Ceramint.2016.12.045 |
0.605 |
|
2016 |
Martin CL, Yan Z, Jauffres D, Bouvard D, Bordia RK. Sintered ceramics with controlled microstructures: Numerical investigations with the Discrete Element Method Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan. 124: 340-345. DOI: 10.2109/Jcersj2.15269 |
0.303 |
|
2016 |
Lichtner A, Roussel D, Jauffrès D, Martin CL, Bordia RK. Effect of Macropore Anisotropy on the Mechanical Response of Hierarchically Porous Ceramics Journal of the American Ceramic Society. 99: 979-987. DOI: 10.1111/Jace.14004 |
0.358 |
|
2016 |
Konegger T, Tsai CC, Peterlik H, Creager SE, Bordia RK. Asymmetric polysilazane-derived ceramic structures with multiscalar porosity for membrane applications Microporous and Mesoporous Materials. 232: 196-204. DOI: 10.1016/J.Micromeso.2016.06.027 |
0.355 |
|
2016 |
Strong KT, Arreguin SA, Bordia RK. Controlled atmosphere pyrolysis of polyureasilazane for tailored volume fraction Si3N4/SiC nanocomposites powders Journal of the European Ceramic Society. 36: 3663-3669. DOI: 10.1016/J.Jeurceramsoc.2016.03.015 |
0.325 |
|
2016 |
Ahmed Y, Zaki Z, Bordia R, Besisa D, Amin A. Simultaneous synthesis and sintering of TiC/Al2O3 composite via self propagating synthesis with direct consolidation technique Ceramics International. 42: 16589-16597. DOI: 10.1016/J.Ceramint.2016.07.080 |
0.336 |
|
2016 |
Peng Y, Burtovyy R, Yang Y, Urban MW, Kennedy MS, Kornev KG, Bordia R, Luzinov I. Towards scalable fabrication of ultrasmooth and porous thin carbon films Carbon. 96: 184-195. DOI: 10.1016/J.Carbon.2015.09.060 |
0.304 |
|
2015 |
Konegger T, Williams LF, Bordia RK. Planar, Polysilazane-Derived Porous Ceramic Supports for Membrane and Catalysis Applications. Journal of the American Ceramic Society. American Ceramic Society. 98: 3047-3053. PMID 26681809 DOI: 10.1111/Jace.13758 |
0.383 |
|
2015 |
Konegger T, Patidar R, Bordia RK. A novel processing approach for free-standing porous non-oxide ceramic supports from polycarbosilane and polysilazane precursors. Journal of the European Ceramic Society. 35: 2679-2683. PMID 26339126 DOI: 10.1016/J.Jeurceramsoc.2015.03.009 |
0.372 |
|
2015 |
Konegger T, Tsai CC, Bordia RK. Preparation of polymer-derived ceramic coatings by dip-coating Materials Science Forum. 825: 645-652. DOI: 10.4028/Www.Scientific.Net/Msf.825-826.645 |
0.408 |
|
2015 |
Shang H, Mohanram A, Bordia RK. Densification and Microstructural Evolution of Hierarchically Porous Ceramics during Sintering Journal of the American Ceramic Society. 98: 3424-3430. DOI: 10.1111/Jace.13812 |
0.333 |
|
2015 |
Grujicic M, Galgalikar R, Ramaswami S, Snipes J, Yavari R, Bordia RK. Multi-physics modeling and simulations of reactive melt infiltration process used in fabrication of ceramic-matrix composites (CMCs) Multidiscipline Modeling in Materials and Structures. 11: 73-74. DOI: 10.1108/Mmms-06-2014-0035 |
0.371 |
|
2015 |
Flores O, Bordia RK, Bernard S, Uhlemann T, Krenkel W, Motz G. Processing and characterization of large diameter ceramic SiCN monofilaments from commercial oligosilazanes Rsc Advances. 5: 107001-107011. DOI: 10.1039/C5Ra17300K |
0.346 |
|
2015 |
Shang H, Mohanram A, Olevsky E, Bordia RK. Evolution of anisotropy in hierarchical porous ceramics during sinter-forging Journal of the European Ceramic Society. DOI: 10.1016/J.Jeurceramsoc.2015.12.042 |
0.3 |
|
2015 |
Lichtner AZ, Jauffrès D, Roussel D, Charlot F, Martin CL, Bordia RK. Dispersion, connectivity and tortuosity of hierarchical porosity composite SOFC cathodes prepared by freeze-casting Journal of the European Ceramic Society. 35: 585-595. DOI: 10.1016/J.Jeurceramsoc.2014.09.030 |
0.382 |
|
2015 |
Roussel D, Lichtner A, Jauffrès D, Bordia RK, Martin CL. Effective transport properties of 3D multi-component microstructures with interface resistance Computational Materials Science. 96: 277-283. DOI: 10.1016/J.Commatsci.2014.09.027 |
0.306 |
|
2015 |
Reschke V, Bordia RK, Scheffler F, Scheffler M. Rheology and crosslinking of a low-viscosity SiOC preceramic polymer Ceramics International. DOI: 10.1016/J.Ceramint.2016.01.171 |
0.304 |
|
2014 |
Wang K, Unger J, Torrey JD, Flinn BD, Bordia RK. Corrosion resistant polymer derived ceramic composite environmental barrier coatings Journal of the European Ceramic Society. 34: 3597-3606. DOI: 10.1016/J.Jeurceramsoc.2014.05.036 |
0.783 |
|
2013 |
Hrabe NW, Heinl P, Bordia RK, Körner C, Fernandes RJ. Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4 V) structures fabricated by selective electron beam melting. Connective Tissue Research. 54: 351-60. PMID 23869614 DOI: 10.3109/03008207.2013.822864 |
0.744 |
|
2013 |
Wang K, Günthner M, Motz G, Flinn BD, Bordia RK. Control of surface energy of silicon oxynitride films. Langmuir : the Acs Journal of Surfaces and Colloids. 29: 2889-96. PMID 23360364 DOI: 10.1021/La304307Y |
0.585 |
|
2013 |
Lichtner AZ, Jauffrès D, Martin CL, Bordia RK. Processing of hierarchical and anisotropic porosity LSM-YSZ composites Journal of the American Ceramic Society. 96: 2745-2753. DOI: 10.1111/Jace.12478 |
0.37 |
|
2013 |
Dandeneau CS, Bodick TW, Bordia RK, Ohuchi FS. Thermoelectric properties of reduced polycrystalline Sr 0.5 Ba 0.5 Nb 2 O 6 fabricated via solution combustion synthesis Journal of the American Ceramic Society. 96: 2230-2237. DOI: 10.1111/Jace.12319 |
0.334 |
|
2012 |
Wang K, Zheng X, Ohuchi FS, Bordia RK. The conversion of perhydropolysilazane into SiON films characterized by X-ray photoelectron spectroscopy Journal of the American Ceramic Society. 95: 3722-3725. DOI: 10.1111/Jace.12045 |
0.588 |
|
2012 |
Rohrer GS, Affatigato M, Backhaus M, Bordia RK, Chan HM, Curtarolo S, Demkov A, Eckstein JN, Faber KT, Garay JE, Gogotsi Y, Huang L, Jones LE, Kalinin SV, Lad RJ, et al. Challenges in ceramic science: A report from the workshop on emerging research areas in ceramic science Journal of the American Ceramic Society. 95: 3699-3712. DOI: 10.1111/Jace.12033 |
0.316 |
|
2012 |
Wakai F, Bordia RK. Microstructural evolution and anisotropic shrinkage in constrained sintering and sinter forging Journal of the American Ceramic Society. 95: 2389-2397. DOI: 10.1111/J.1551-2916.2012.05211.X |
0.337 |
|
2012 |
McCloy JS, Leslie C, Kaspar T, Jiang W, Bordia RK. Magnetic behavior of Ni and Co doped CuMn 2O 4 spinels Journal of Applied Physics. 111. DOI: 10.1063/1.3680530 |
0.754 |
|
2012 |
Günthner M, Wang K, Bordia RK, Motz G. Conversion behaviour and resulting mechanical properties of polysilazane-based coatings Journal of the European Ceramic Society. 32: 1883-1892. DOI: 10.1016/J.Jeurceramsoc.2011.09.005 |
0.646 |
|
2012 |
Jauffrès D, Martin CL, Lichtner A, Bordia RK. Simulation of the toughness of partially sintered ceramics with realistic microstructures Acta Materialia. 60: 4685-4694. DOI: 10.1016/J.Actamat.2012.05.024 |
0.305 |
|
2011 |
Hrabe NW, Heinl P, Flinn B, Körner C, Bordia RK. Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V). Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 99: 313-20. PMID 21948776 DOI: 10.1002/Jbm.B.31901 |
0.753 |
|
2011 |
Reschke V, Laskowsky A, Kappa M, Wang K, Bordia RK, Scheffler M. Polymer derived ceramic foams with additional strut porosity Epitoanyag - Journal of Silicate Based and Composite Materials. 63: 57-61. DOI: 10.14382/Epitoanyag-Jsbcm.2011.10 |
0.521 |
|
2011 |
Wang K, Günthner M, Motz G, Bordia RK. High performance environmental barrier coatings, Part II: Active filler loaded SiOC system for superalloys Journal of the European Ceramic Society. 31: 3011-3020. DOI: 10.1016/J.Jeurceramsoc.2011.05.047 |
0.622 |
|
2011 |
Günthner M, Schütz A, Glatzel U, Wang K, Bordia RK, Greißl O, Krenkel W, Motz G. High performance environmental barrier coatings, Part I: Passive filler loaded SiCN system for steel Journal of the European Ceramic Society. 31: 3003-3010. DOI: 10.1016/J.Jeurceramsoc.2011.05.027 |
0.616 |
|
2011 |
Mao Z, Wang J, Sun B, Bordia RK. Wear resistance of reactive plasma sprayed and laser remelted TiB 2-TiC0.3N0.7 based composite coatings against medium carbon steel Applied Surface Science. 257: 2610-2616. DOI: 10.1016/J.Apsusc.2010.10.031 |
0.393 |
|
2011 |
Terry CS, Scheffler F, Torrey JD, Bordia RK, Scheffler M. In situ carbon nanotube formation in templated pores of polymer-derived ceramics Advanced Engineering Materials. 13: 906-912. DOI: 10.1002/Adem.201000368 |
0.757 |
|
2010 |
Nath S, Biswas K, Wang K, Bordia RK, Basu B. Sintering, phase stability, and properties of calcium phosphate-mullite composites Journal of the American Ceramic Society. 93: 1639-1649. DOI: 10.1111/J.1551-2916.2010.03662.X |
0.594 |
|
2010 |
Ewais EMM, Attia MAA, Abousree-Hegazy A, Bordia RK. Investigation of the effect of ZrO2 and ZrO2/Al2O3 additions on the hot-pressing and properties of equimolecular mixtures of α- and β-Si3N4 Ceramics International. 36: 1327-1338. DOI: 10.1016/J.Ceramint.2010.01.018 |
0.39 |
|
2009 |
Zhang W, Melcher R, Travitzky N, Bordia RK, Greil P. Three-dimensional printing of complex-shaped alumina/ glass composites Advanced Engineering Materials. 11: 1039-1043. DOI: 10.1002/Adem.200900213 |
0.393 |
|
2008 |
Torrey JD, Bordia RK. Processing of polymer-derived ceramic composite coatings on steel Journal of the American Ceramic Society. 91: 41-45. DOI: 10.1111/J.1551-2916.2007.02019.X |
0.776 |
|
2008 |
Torrey JD, Bordia RK. Mechanical properties of polymer-derived ceramic composite coatings on steel Journal of the European Ceramic Society. 28: 253-257. DOI: 10.1016/J.Jeurceramsoc.2007.05.013 |
0.777 |
|
2007 |
Torrey JD, Bordia RK. Phase and microstructural evolution in polymer-derived composite systems and coatings Journal of Materials Research. 22: 1959-1966. DOI: 10.1557/Jmr.2007.0246 |
0.785 |
|
2007 |
Guillon O, Aulbach E, Rödel J, Bordia RK. Constrained sintering of alumina thin films: Comparison between experiment and modeling Journal of the American Ceramic Society. 90: 1733-1737. DOI: 10.1111/J.1551-2916.2007.01650.X |
0.319 |
|
2007 |
Guillon O, Rödel J, Bordia RK. Effect of green-state processing on the sintering stress and viscosity of alumina compacts Journal of the American Ceramic Society. 90: 1637-1640. DOI: 10.1111/J.1551-2916.2007.01572.X |
0.319 |
|
2006 |
Boddapati SR, Ma H, Bordia RK, Jen AKY. Interfacial-shear strength of the perfluorocyclobutane films on silicon Journal of Materials Research. 21: 1759-1769. DOI: 10.1557/Jmr.2006.0207 |
0.337 |
|
2006 |
Bordia RK, Zuo R, Guillon O, Salamone SM, Rödel J. Anisotropic constitutive laws for sintering bodies Acta Materialia. 54: 111-118. DOI: 10.1016/J.Actamat.2005.08.025 |
0.566 |
|
2006 |
Torrey JD, Bordia RK, Henager CH, Blum Y, Shin Y, Samuels WD. Composite polymer derived ceramic system for oxidizing environments Journal of Materials Science. 41: 4617-4622. DOI: 10.1007/S10853-006-0242-1 |
0.758 |
|
2005 |
Scheffler M, Bordia R, Travitzky N, Greil P. Development of a rapid crosslinking preceramic polymer system Journal of the European Ceramic Society. 25: 175-180. DOI: 10.1016/J.Jeurceramsoc.2004.07.013 |
0.327 |
|
2004 |
Zheng F, Bordia RK, Pederson LR. Phase constitution in Sr and Mg doped LaGaO 3 system Materials Research Bulletin. 39: 141-155. DOI: 10.1016/S0025-5408(03)00140-5 |
0.496 |
|
2003 |
Salamone SM, Stearns LC, Bordia RK, Harmer MP. Effect of Rigid Inclusions on the Densification and Constitutive Parameters of Liquid-Phase-Sintered YBa2Cu3O6+xPowder Compacts Journal of the American Ceramic Society. 86: 883-892. DOI: 10.1111/J.1151-2916.2003.Tb03392.X |
0.326 |
|
2003 |
Salamone SM, Stearns LC, Bordia RK, Harmer MP. Effect of rigid inclusions on the densification and constitutive parameters of liquid-phase-sintered YBa2Cu3O6+x powder compacts Journal of the American Ceramic Society. 86: 883-892. |
0.512 |
|
2001 |
Park CS, Zheng F, Salamone S, Bordia RK. Processing of composites in the Ti-Si-C system Journal of Materials Science. 36: 3313-3322. DOI: 10.1023/A:1017963109176 |
0.58 |
|
2001 |
Holbery JD, Bordia RK. Accelerated cure of thermoset fiber composites utilizing latent cure agents Journal of Materials Science. 36: 5301-5308. DOI: 10.1023/A:1012474702397 |
0.349 |
|
2000 |
Sorensen MA, Stackpoole MM, Frenkel AI, Bordia RK, Korshin GV, Christensen TH. Aging of iron (hydr)oxides by heat treatment and effects on heavy metal binding Environmental Science and Technology. 34: 3991-4000. DOI: 10.1021/Es9914543 |
0.738 |
|
2000 |
Sørensen MA, Koch CB, Stackpoole MM, Bordia RK, Benjamin MM, Christensen TH. Effects of thermal treatment on mineralogy and heavy metal behavior in iron oxide stabilized air pollution control residues Environmental Science and Technology. 34: 4620-4627. DOI: 10.1021/Es0009830 |
0.743 |
|
1998 |
Ostrowski T, Ziegler A, Bordia RK, Rödel J. Evolution of Young's modulus, strength, and microstructure during liquid-phase sintering Journal of the American Ceramic Society. 81: 1852-1860. DOI: 10.1111/J.1151-2916.1998.Tb02557.X |
0.354 |
|
1991 |
Jagota A, Boyes E, Bordia R. Sintering of Glass Powder Packings with Metal Inclusions Mrs Proceedings. 249. DOI: 10.1557/Proc-249-475 |
0.357 |
|
1989 |
Horowitz HS, Bordia RK, Torardi CC, Morrissey KJ, Subramanian MA, McCarron EM, Michel JB, Askew TR, Flippen RB, Bolt JD, Chowdhry U. The effect of synthesis methods on the processing and properties of YBa2Cu3O6+x Solid State Ionics. 32: 1087-1099. DOI: 10.1016/0167-2738(89)90401-3 |
0.338 |
|
1988 |
BORDIA RK, RAJ R. Hot Isostatic Pressing of Ceramic/Ceramic Composites at Pressures <10 MPa Advanced Ceramic Materials. 3: 122-126. DOI: 10.1111/J.1551-2916.1988.Tb00184.X |
0.328 |
|
1988 |
BORDIA RK, RAJ R. Sintering of TiO2–Al2O3 Composites: A Model Experimental Investigation Journal of the American Ceramic Society. 71: 302-310. DOI: 10.1111/J.1151-2916.1988.Tb05863.X |
0.333 |
|
1988 |
Farneth WE, Bordia RK, McCarron EM, Crawford MK, Flippen RB. Influence of oxygen stoichiometry on the structure and superconducting transition temperature of YBa2Cu3Ox Solid State Communications. 66: 953-959. DOI: 10.1016/0038-1098(88)90545-5 |
0.3 |
|
1988 |
Horowitz HS, Bordia RK, Flippen RB, Johnson RE, Chowdhry U. Degradation of sinterability and superconducting properties of fine particle YBa2Cu3O7-y by exposure to moisture Materials Research Bulletin. 23: 821-830. DOI: 10.1016/0025-5408(88)90075-X |
0.352 |
|
1987 |
Horowitz HS, Bordia RK, Flippen RB, Johnson RE. Effect of Ambient Atmosphere on YBa 2 Cu 3 O 7-y Mrs Proceedings. 99: 903. DOI: 10.1557/Proc-99-903 |
0.334 |
|
1987 |
Bordia RK, Horowitz HS, Subramanian MA, Michel JB, McCarron EM, Torardi CC, Bolt JD, Chowdhry U, Lopdrup E, Poon SJ. Sintering and Microstructure - Property Relations for YBa2Cu3Ox Mrs Proceedings. 99. DOI: 10.1557/Proc-99-245 |
0.32 |
|
1986 |
Bordia RK, Raj R. Analysis of Sintering of a Composite with a Glass or Ceramic Matrix Journal of the American Ceramic Society. 69: C‐55-C‐57. DOI: 10.1111/J.1151-2916.1986.Tb07438.X |
0.357 |
|
1984 |
Raj R, Bordia RK. Sintering behavior of bi-modal powder compacts Acta Metallurgica. 32: 1003-1019. DOI: 10.1016/0001-6160(84)90003-8 |
0.306 |
|
Show low-probability matches. |