Year |
Citation |
Score |
2019 |
Sun Z, To S, Zhang G, Zhang S. Flexible fabrication of micro-optics arrays with high-aspect-ratio by an offset-tool-servo diamond machining system. Optics Express. 27: 9631-9646. PMID 31045112 DOI: 10.1364/OE.27.009631 |
0.336 |
|
2019 |
Zhang S, Li Z, Xiong Z, To S. Microwave formation mechanisms in surface generation of ultra-precision machining The International Journal of Advanced Manufacturing Technology. 104: 1239-1244. DOI: 10.1007/S00170-019-03989-4 |
0.43 |
|
2018 |
Sun Z, To S, Zhang S, Zhang G. Theoretical and experimental investigation into non-uniformity of surface generation in micro-milling International Journal of Mechanical Sciences. 140: 313-324. DOI: 10.1016/J.Ijmecsci.2018.03.019 |
0.41 |
|
2018 |
Sun Z, To S, Zhang S. A novel ductile machining model of single-crystal silicon for freeform surfaces with large azimuthal height variation by ultra-precision fly cutting International Journal of Machine Tools & Manufacture. 135: 1-11. DOI: 10.1016/J.Ijmachtools.2018.07.005 |
0.416 |
|
2018 |
Zhang S, Yu J, To S, Xiong Z. A theoretical and experimental study of spindle imbalance induced forced vibration and its effect on surface generation in diamond turning International Journal of Machine Tools & Manufacture. 133: 61-71. DOI: 10.1016/J.Ijmachtools.2018.06.002 |
0.304 |
|
2016 |
Zhang G, To S, Zhang S, Zhu Z. Case study of surface micro-waves in ultra-precision raster fly cutting Precision Engineering. 46: 393-398. DOI: 10.1016/J.Precisioneng.2016.06.009 |
0.414 |
|
2016 |
Zhang G, To S, Zhang S. Evaluation for tool flank wear and its influences on surface roughness in ultra-precision raster fly cutting International Journal of Mechanical Sciences. 118: 125-134. DOI: 10.1016/J.Ijmecsci.2016.09.013 |
0.434 |
|
2015 |
Zhu Z, To S, Zhang S. Active control of residual tool marks for freeform optics functionalization by novel biaxial servo assisted fly cutting. Applied Optics. 54: 7656-62. PMID 26368889 DOI: 10.1364/Ao.54.007656 |
0.333 |
|
2015 |
Zhu Z, To S, Zhang S. Large-scale fabrication of micro-lens array by novel end-fly-cutting-servo diamond machining. Optics Express. 23: 20593-604. PMID 26367912 DOI: 10.1364/Oe.23.020593 |
0.403 |
|
2015 |
Zhu Z, To S, Zhang S. Theoretical and experimental investigation on the novel end-fly-cutting-servo diamond machining of hierarchical micro-nanostructures International Journal of Machine Tools & Manufacture. 94: 15-25. DOI: 10.1016/J.Ijmachtools.2015.04.002 |
0.452 |
|
2015 |
Zhang G, To S, Zhang S. Relationships of tool wear characteristics to cutting mechanics, chip formation, and surface quality in ultra-precision fly cutting The International Journal of Advanced Manufacturing Technology. 83: 133-144. DOI: 10.1007/S00170-015-7483-6 |
0.426 |
|
2012 |
Zhang S, To S, Cheung C, Du J. Novel auto-regressive measurement of diamond tool wear in ultra-precision raster milling International Journal of Precision Engineering and Manufacturing. 13: 1661-1670. DOI: 10.1007/S12541-012-0218-9 |
0.336 |
|
Show low-probability matches. |