| Year |
Citation |
Score |
| 2024 |
Shin M, Martens PJ, Siegmund T, Kruzic JJ, Gludovatz B. A numerical study of dehydration induced fracture toughness degradation in human cortical bone. Journal of the Mechanical Behavior of Biomedical Materials. 153: 106468. PMID 38493561 DOI: 10.1016/j.jmbbm.2024.106468 |
0.519 |
|
| 2024 |
Shin M, Pelletier MH, Lovric V, Walsh WR, Martens PJ, Kruzic JJ, Gludovatz B. Effect of gamma irradiation and supercritical carbon dioxide sterilization with Novakill™ or ethanol on the fracture toughness of cortical bone. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 112: e35356. PMID 38247241 DOI: 10.1002/jbm.b.35356 |
0.43 |
|
| 2023 |
Shin M, Zhang M, Vom Scheidt A, Pelletier MH, Walsh WR, Martens PJ, Kruzic JJ, Busse B, Gludovatz B. Corrigendum to "Impact of test environment on the fracture resistance of cortical bone" [J. Mech. Behav. Biomed. Mater. 129 (2022) 105155]. Journal of the Mechanical Behavior of Biomedical Materials. 106024. PMID 37479625 DOI: 10.1016/j.jmbbm.2023.106024 |
0.319 |
|
| 2022 |
Kruzic JJ, Hoffman M, Arsecularatne JA. Fatigue and wear of human tooth enamel: A review. Journal of the Mechanical Behavior of Biomedical Materials. 138: 105574. PMID 36473402 DOI: 10.1016/j.jmbbm.2022.105574 |
0.431 |
|
| 2022 |
Shin M, Zhang M, Vom Scheidt A, Pelletier MH, Walsh WR, Martens PJ, Kruzic JJ, Busse B, Gludovatz B. Impact of test environment on the fracture resistance of cortical bone. Journal of the Mechanical Behavior of Biomedical Materials. 129: 105155. PMID 35313188 DOI: 10.1016/j.jmbbm.2022.105155 |
0.542 |
|
| 2020 |
Tanaka CB, Zhou Y, Gludovatz B, Kruzic JJ. Anisotropic fracture resistance of avian eggshell. Journal of the Mechanical Behavior of Biomedical Materials. 110: 103888. PMID 32957195 DOI: 10.1016/J.Jmbbm.2020.103888 |
0.52 |
|
| 2020 |
Mroz M, Rosenberg JL, Acevedo C, Kruzic JJ, Raeymaekers B, Naleway SE. Ultrasound freeze-casting of a biomimetic layered microstructure in epoxy-ceramic composite materials to increase strength and hardness Materialia. 12: 100754. DOI: 10.1016/J.Mtla.2020.100754 |
0.364 |
|
| 2020 |
Li B, Scudino S, Gludovatz B, Kruzic JJ. Role of pre-existing shear band morphology in controlling the fracture behavior of a Zr–Ti–Cu–Ni–Al bulk metallic glass Materials Science and Engineering: A. 786: 139396. DOI: 10.1016/J.Msea.2020.139396 |
0.545 |
|
| 2020 |
Best JP, Ast J, Li B, Stolpe M, Busch R, Yang F, Li X, Michler J, Kruzic JJ. Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass Materials Science and Engineering: A. 770: 138535. DOI: 10.1016/J.Msea.2019.138535 |
0.376 |
|
| 2020 |
Tanaka CB, Zhou Y, Gludovatz B, Kruzic JJ. Anisotropic fracture resistance of avian eggshell Journal of the Mechanical Behavior of Biomedical Materials. 110: 103888. DOI: 10.1016/j.jmbbm.2020.103888 |
0.309 |
|
| 2020 |
Douzian G, Muránsky O, Kruzic JJ, Wright RN, Payten W. Assessment of modelling methodologies for prediction of high-temperature creep-fatigue behaviour of Alloy 617 International Journal of Pressure Vessels and Piping. 187: 104150. DOI: 10.1016/J.Ijpvp.2020.104150 |
0.382 |
|
| 2020 |
Hasib MT, Ostergaard HE, Li X, Kruzic JJ. Fatigue crack growth behavior of laser powder bed fusion additive manufactured Ti-6Al-4V: Roles of post heat treatment and build orientation International Journal of Fatigue. 105955. DOI: 10.1016/J.Ijfatigue.2020.105955 |
0.485 |
|
| 2020 |
Pribe JD, Siegmund T, Kruzic JJ. The roles of yield strength mismatch, interface strength, and plastic strain gradients in fatigue crack growth across interfaces Engineering Fracture Mechanics. 235: 107072. DOI: 10.1016/J.Engfracmech.2020.107072 |
0.541 |
|
| 2020 |
Best JP, Ostergaard HE, Li B, Stolpe M, Yang F, Nomoto K, Hasib MT, Muránsky O, Busch R, Li X, Kruzic JJ. Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass Additive Manufacturing. 36: 101416. DOI: 10.1016/J.Addma.2020.101416 |
0.483 |
|
| 2019 |
Tanaka CB, Ahmad NHB, Ellakwa A, Kruzic JJ. Effect of cooling protocol on mechanical properties and microstructure of dental veneering ceramics. Dental Materials : Official Publication of the Academy of Dental Materials. PMID 31400983 DOI: 10.1016/J.Dental.2019.07.011 |
0.31 |
|
| 2019 |
Addison DA, Tucker JD, Siegmund T, Tomar V, Kruzic JJ. Corrigendum to “Cyclic and time-dependent crack growth mechanisms in Alloy 617 at 800 °C” [Mater. Sci. Eng. A 737 (2018) 205–212] Materials Science and Engineering: A. 764: 138207. DOI: 10.1016/J.Msea.2019.138207 |
0.539 |
|
| 2019 |
Pribe JD, Siegmund T, Tomar V, Kruzic JJ. Plastic strain gradients and transient fatigue crack growth: A computational study International Journal of Fatigue. 120: 283-293. DOI: 10.1016/J.Ijfatigue.2018.11.020 |
0.541 |
|
| 2019 |
Li B, Xie S, Kruzic JJ. Toughness enhancement and heterogeneous softening of a cryogenically cycled Zr–Cu–Ni–Al–Nb bulk metallic glass Acta Materialia. 176: 278-288. DOI: 10.1016/J.Actamat.2019.07.012 |
0.562 |
|
| 2019 |
Moschetti M, Xu A, Schuh B, Hohenwarter A, Couzinié J, Kruzic JJ, Bhattacharyya D, Gludovatz B. On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy Jom. 72: 130-138. DOI: 10.1007/S11837-019-03861-6 |
0.391 |
|
| 2019 |
Rozman KA, Holcomb GR, Carney CS, Doğan ÖN, Kruzic JJ, Hawk JA. Effect of 730 °C Supercritical Fluid Exposure on the Fatigue Threshold of Ni-Based Superalloy Haynes 282 Journal of Materials Engineering and Performance. 28: 4335-4347. DOI: 10.1007/S11665-019-04164-2 |
0.496 |
|
| 2018 |
Kruzic JJ, Arsecularatne JA, Tanaka CB, Hoffman MJ, Cesar PF. Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics. Journal of the Mechanical Behavior of Biomedical Materials. 88: 504-533. PMID 30223214 DOI: 10.1016/J.Jmbbm.2018.08.008 |
0.505 |
|
| 2018 |
Addison DA, Tucker JD, Siegmund T, Tomar V, Kruzic JJ. Cyclic and time-dependent crack growth mechanisms in Alloy 617 at 800 °C Materials Science and Engineering: A. 737: 205-212. DOI: 10.1016/J.Msea.2018.09.034 |
0.585 |
|
| 2018 |
Xie S, Tu X, Kruzic J. Inducing strain hardening in a Zr-based bulk metallic glass via cobalt mediated phase separations Journal of Alloys and Compounds. 735: 1576-1581. DOI: 10.1016/J.Jallcom.2017.11.223 |
0.328 |
|
| 2017 |
Gludovatz B, Walsh F, Zimmermann EA, Naleway SE, Ritchie RO, Kruzic JJ. Multiscale structure and damage tolerance of coconut shells. Journal of the Mechanical Behavior of Biomedical Materials. PMID 28550972 DOI: 10.1016/J.Jmbbm.2017.05.024 |
0.793 |
|
| 2017 |
Truszkowska A, Yu Q, Greaney PA, Evans TM, Kruzic JJ. Developing a Crystal Plasticity Model for Metallic Materials Based on the Discrete Element Method Mrs Advances. 2: 2609-2614. DOI: 10.1557/Adv.2017.430 |
0.368 |
|
| 2017 |
Scudino S, Shahid RN, Escher B, Stoica M, Li BS, Kruzic JJ. Mapping the cyclic plastic zone to elucidate the mechanisms of crack tip deformation in bulk metallic glasses Applied Physics Letters. 110: 081903. DOI: 10.1063/1.4977001 |
0.587 |
|
| 2017 |
Xie S, Kruzic JJ. Cold rolling improves the fracture toughness of a Zr-based bulk metallic glass Journal of Alloys and Compounds. 694: 1109-1120. DOI: 10.1016/J.Jallcom.2016.10.134 |
0.588 |
|
| 2017 |
Alam M, Parmigiani JP, Kruzic JJ. An experimental assessment of methods to predict crack deflection at an interface Engineering Fracture Mechanics. 181: 116-129. DOI: 10.1016/J.Engfracmech.2017.05.013 |
0.505 |
|
| 2016 |
Seiler PE, Siegmund T, Zhang Y, Tomar V, Kruzic JJ. Stationary and propagating cracks in a strain gradient visco-plastic solid International Journal of Fracture. 202: 111-125. DOI: 10.1007/S10704-016-0148-0 |
0.597 |
|
| 2016 |
Kruzic JJ. Bulk Metallic Glasses as Structural Materials: A Review Advanced Engineering Materials. DOI: 10.1002/Adem.201600066 |
0.4 |
|
| 2015 |
Khvostenko D, Salehi S, Naleway SE, Hilton TJ, Ferracane JL, Mitchell JC, Kruzic JJ. Cyclic mechanical loading promotes bacterial penetration along composite restoration marginal gaps. Dental Materials : Official Publication of the Academy of Dental Materials. 31: 702-10. PMID 25900624 DOI: 10.1016/J.Dental.2015.03.011 |
0.304 |
|
| 2015 |
Mikijelj B, Nawaz Z, Kruzic JJ, Idrobo J, Swab JJ, Özcoban H, Jelitto H, Schneider GA, Fett T, Liu Y. Intergranular nanostructure effects on strength and toughness of Si3N4 Journal of the American Ceramic Society. 98: 1650-1657. DOI: 10.1111/Jace.13484 |
0.432 |
|
| 2015 |
Li BS, Shakur Shahabi H, Scudino S, Eckert J, Kruzic JJ. Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass Materials Science and Engineering A. 646: 242-248. DOI: 10.1016/J.Msea.2015.08.055 |
0.448 |
|
| 2015 |
Rozman KA, Kruzic JJ, Sears JS, Hawk JA. Fatigue Crack Growth Mechanisms for Nickel-based Superalloy Haynes 282 at 550-750 °C Journal of Materials Engineering and Performance. 24: 3699-3707. DOI: 10.1007/S11665-015-1678-8 |
0.571 |
|
| 2015 |
Rozman KA, Kruzic JJ, Hawk JA. Fatigue Crack Growth Behavior of Nickel-base Superalloy Haynes 282 at 550-750 °C Journal of Materials Engineering and Performance. 24: 2841-2846. DOI: 10.1007/S11665-015-1588-9 |
0.573 |
|
| 2014 |
Yahyazadehfar M, Nazari A, Kruzic JJ, Quinn GD, Arola D. An inset CT specimen for evaluating fracture in small samples of material. Journal of the Mechanical Behavior of Biomedical Materials. 30: 358-68. PMID 24268892 DOI: 10.1016/J.Jmbbm.2013.10.017 |
0.557 |
|
| 2014 |
Greene RB, Fünfschilling S, Fett T, Hoffmann MJ, Kruzic JJ. Fatigue threshold R-curves predict fatigue endurance strength for self-reinforced silicon nitride Journal of the American Ceramic Society. 97: 577-583. DOI: 10.1111/Jace.12697 |
0.54 |
|
| 2014 |
Gludovatz B, Naleway SE, Ritchie RO, Kruzic JJ. Erratum to: “Size-dependent fracture toughness of bulk metallic glasses” [Acta Mater. 70 (2014) 198–207] Acta Materialia. 80: 507. DOI: 10.1016/J.Actamat.2014.04.001 |
0.519 |
|
| 2014 |
Gludovatz B, Naleway SE, Ritchie RO, Kruzic JJ. Size-dependent fracture toughness of bulk metallic glasses Acta Materialia. 70: 198-207. DOI: 10.1016/J.Actamat.2014.01.062 |
0.526 |
|
| 2013 |
Härtelt M, Fünfschilling S, Schwind T, Riesch-Oppermann H, Fett T, Kruzic JJ. Deducing the fatigue crack growth rates of natural flaws in silicon nitride ceramics: Role of R-curves Journal of the American Ceramic Society. 96: 2593-2597. DOI: 10.1111/Jace.12410 |
0.603 |
|
| 2013 |
Greene RB, Fünfschilling S, Fett T, Hoffmann MJ, Kruzic JJ. Fatigue crack growth behavior of silicon nitride: Roles of grain aspect ratio and intergranular film composition Journal of the American Ceramic Society. 96: 259-265. DOI: 10.1111/Jace.12006 |
0.589 |
|
| 2013 |
Eilertsen J, Subramanian MA, Kruzic JJ. Fracture toughness of Co4Sb12 and In 0.1Co4Sb12 thermoelectric skutterudites evaluated by three methods Journal of Alloys and Compounds. 552: 492-498. DOI: 10.1016/J.Jallcom.2012.11.066 |
0.555 |
|
| 2013 |
Naleway SE, Greene RB, Gludovatz B, Dave NKN, Ritchie RO, Kruzic JJ. A highly fatigue-resistant Zr-based bulk metallic glass Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 5688-5693. DOI: 10.1007/S11661-013-1923-4 |
0.644 |
|
| 2013 |
Kruzic JJ, Yuan R, Cannon RM, Ritchie RO. Determining Worst-Case Fatigue Thresholds for Grain-Bridging Ceramics Materials Lifetime Science &Amp; Engineering. 60-68. DOI: 10.1002/9781118788035.Ch7 |
0.696 |
|
| 2012 |
Greene RB, Gallops S, Fünfschilling S, Fett T, Hoffmann MJ, Ager JW, Kruzic JJ. A direct comparison of non-destructive techniques for determining bridging stress distributions Journal of the Mechanics and Physics of Solids. 60: 1462-1477. DOI: 10.1016/J.Jmps.2012.04.007 |
0.489 |
|
| 2012 |
Kruzic JJ. Fatigue threshold R-curves for the analysis of short fatigue cracks Fatigue Crack Growth: Mechanisms, Behavior and Analysis. 257-270. |
0.483 |
|
| 2011 |
Greene RB, Kruzic JJ. Fatigue behavior, bridging stresses, and fatigue reliability in silicon nitride ceramics Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 65-68. DOI: 10.1115/MSEC2011-50056 |
0.471 |
|
| 2011 |
Gallops S, Kruzic JJ. Fatigue reliability predictions for crack bridging materials Proceedings of the Asme Turbo Expo. 6: 163-167. DOI: 10.1115/GT2011-46222 |
0.562 |
|
| 2011 |
Gallops S, Fett T, Kruzic JJ. Fatigue threshold R-curve behavior of grain bridging ceramics: Role of grain size and grain-boundary adhesion Journal of the American Ceramic Society. 94: 2556-2561. DOI: 10.1111/J.1551-2916.2011.04409.X |
0.523 |
|
| 2011 |
Fünfschilling S, Fett T, Oberacker R, Hoffmann MJ, Schneider GA, Becher PF, Kruzic JJ. Crack-tip toughness from vickers crack-tip opening displacements for materials with strongly rising R-curves Journal of the American Ceramic Society. 94: 1884-1892. DOI: 10.1111/J.1551-2916.2010.04329.X |
0.593 |
|
| 2011 |
Philo SL, Heinrich J, Gallino I, Busch R, Kruzic JJ. Fatigue crack growth behavior of a Zr58.5Cu 15.6Ni12.8Al10.3Nb2.8 bulk metallic glass-forming alloy Scripta Materialia. 64: 359-362. DOI: 10.1016/J.Scriptamat.2010.10.042 |
0.533 |
|
| 2011 |
Gallops S, Fett T, Ager JW, Kruzic JJ. Fatigue threshold R-curves predict small crack fatigue behavior of bridging toughened materials Acta Materialia. 59: 7654-7661. DOI: 10.1016/J.Actamat.2011.08.038 |
0.609 |
|
| 2011 |
Fünfschilling S, Fett T, Hoffmann MJ, Oberacker R, Schwind T, Wippler J, Böhlke T, Özcoban H, Schneider GA, Becher PF, Kruzic JJ. Mechanisms of toughening in silicon nitrides: The roles of crack bridging and microstructure Acta Materialia. 59: 3978-3989. DOI: 10.1016/J.Actamat.2011.03.023 |
0.576 |
|
| 2011 |
Kruzic JJ. Understanding the problem of fatigue in bulk metallic glasses Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1516-1523. DOI: 10.1007/S11661-010-0413-1 |
0.448 |
|
| 2010 |
Landrigan MD, Flatley JC, Turnbull TL, Kruzic JJ, Ferracane JL, Hilton TJ, Roeder RK. Detection of dentinal cracks using contrast-enhanced micro-computed tomography. Journal of the Mechanical Behavior of Biomedical Materials. 3: 223-7. PMID 20129422 DOI: 10.1016/J.Jmbbm.2009.10.003 |
0.557 |
|
| 2010 |
Fünfschilling S, Fett T, Oberacker R, Hoffmann MJ, Özcoban H, Jelitto H, Schneider GA, Kruzic JJ. R curves from compliance and optical crack-length measurements Journal of the American Ceramic Society. 93: 2814-2821. DOI: 10.1111/J.1551-2916.2010.03758.X |
0.587 |
|
| 2010 |
Philo SL, Kruzic JJ. Fatigue crack growth behavior of a Zr-Ti-Cu-Ni-Be bulk metallic glass: Role of ambient air environment Scripta Materialia. 62: 473-476. DOI: 10.1016/J.Scriptamat.2009.12.014 |
0.571 |
|
| 2010 |
Fünfschilling S, Fett T, Gallops SE, Kruzic JJ, Oberacker R, Hoffmann MJ. First- and second-order approaches for the direct determination of bridging stresses from R-curves Journal of the European Ceramic Society. 30: 1229-1236. DOI: 10.1016/J.Jeurceramsoc.2009.11.013 |
0.42 |
|
| 2009 |
Shah MB, Ferracane JL, Kruzic JJ. R-curve behavior and micromechanisms of fracture in resin based dental restorative composites Journal of the Mechanical Behavior of Biomedical Materials. 2: 502-511. PMID 19627857 DOI: 10.1016/J.Jmbbm.2008.12.005 |
0.646 |
|
| 2009 |
Kruzic JJ, Kim DK, Koester KJ, Ritchie RO. Indentation techniques for evaluating the fracture toughness of biomaterials and hard tissues. Journal of the Mechanical Behavior of Biomedical Materials. 2: 384-95. PMID 19627845 DOI: 10.1016/J.Jmbbm.2008.10.008 |
0.829 |
|
| 2009 |
Kruzic JJ. Materials science. Predicting fatigue failures. Science (New York, N.Y.). 325: 156-8. PMID 19589990 DOI: 10.1126/Science.1173432 |
0.399 |
|
| 2009 |
Shah MB, Ferracane JL, Kruzic JJ. Mechanistic aspects of fatigue crack growth behavior in resin based dental restorative composites Dental Materials. 25: 909-916. PMID 19233460 DOI: 10.1016/J.Dental.2009.01.097 |
0.614 |
|
| 2009 |
Shah MB, Ferracane JL, Kruzic JJ. R-curve behavior and toughening mechanisms of resin-based dental composites: Effects of hydration and post-cure heat treatment Dental Materials. 25: 760-770. PMID 19187956 DOI: 10.1016/J.Dental.2008.12.004 |
0.554 |
|
| 2009 |
Liu M, Vallery RS, Gidley DW, Launey ME, Kruzic JJ. Assessment of the fatigue transformation zone in bulk metallic glasses using positron annihilation spectroscopy Journal of Applied Physics. 105. DOI: 10.1063/1.3120784 |
0.571 |
|
| 2009 |
Kruzic JJ. Understanding crack size effects during fatigue of extrinsically toughened materials 12th International Conference On Fracture 2009, Icf-12. 3: 1919-1927. |
0.553 |
|
| 2008 |
Kruzic JJ, Ritchie RO. Fatigue of mineralized tissues: cortical bone and dentin. Journal of the Mechanical Behavior of Biomedical Materials. 1: 3-17. PMID 19627767 DOI: 10.1016/J.Jmbbm.2007.04.002 |
0.634 |
|
| 2008 |
Kruzic JJ, Ritchie RO. Comments on "Measurement of the microstructural fracture toughness of cortical bone using indentation fracture". Journal of Biomechanics. 41: 1379-80. PMID 18342866 DOI: 10.1016/J.Jbiomech.2008.01.022 |
0.602 |
|
| 2008 |
Kruzic JJ, Satet RL, Hoffmann MJ, Cannon RM, Ritchie RO. The utility of R-curves for understanding fracture toughness-strength relations in bridging ceramics Journal of the American Ceramic Society. 91: 1986-1994. DOI: 10.1111/J.1551-2916.2008.02380.X |
0.599 |
|
| 2008 |
Launey ME, Busch R, Kruzic JJ. Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr-Ti-Ni-Cu-Be bulk metallic glass Acta Materialia. 56: 500-510. DOI: 10.1016/J.Actamat.2007.10.007 |
0.608 |
|
| 2007 |
Vallery RS, Liu M, Gidley DW, Launey ME, Kruzic JJ. Characterization of fatigue-induced free volume changes in a bulk metallic glass using positron annihilation spectroscopy Applied Physics Letters. 91. DOI: 10.1063/1.2825427 |
0.536 |
|
| 2007 |
Gunter IM, Schneibel JH, Kruzic JJ. Ductility and fracture toughness of molybdenum with MgAl2O4 additions Materials Science and Engineering A. 458: 275-280. DOI: 10.1016/J.Msea.2006.12.128 |
0.465 |
|
| 2007 |
Taylor D, Kruzic JJ, Ritchie RO. Papers from the International Conference on the Mechanics of Biomaterials and Tissues International Journal of Fatigue. 29: 991. DOI: 10.1016/J.Ijfatigue.2006.10.009 |
0.42 |
|
| 2007 |
Kruzic JJ, Ritchie RO, Taylor D. Papers from the First International Conference on the Mechanics of Biomaterials and Tissues Engineering Fracture Mechanics. 74: 1837. DOI: 10.1016/J.Engfracmech.2007.03.017 |
0.42 |
|
| 2006 |
Kruzic JJ, Ritchie RO. Kitagawa-Takahashi diagrams define the limiting conditions for cyclic fatigue failure in human dentin. Journal of Biomedical Materials Research. Part A. 79: 747-51. PMID 17013865 DOI: 10.1002/Jbm.A.30939 |
0.704 |
|
| 2006 |
Kruzic JJ, Scott JA, Nalla RK, Ritchie RO. Propagation of surface fatigue cracks in human cortical bone. Journal of Biomechanics. 39: 968-72. PMID 15907859 DOI: 10.1016/J.Jbiomech.2005.01.025 |
0.824 |
|
| 2006 |
Ritchie RO, Nalla RK, Kruzic JJ, Ager IW, Balooch G, Kinney JH. Fracture and ageing in bone: Toughness and structural characterization Strain. 42: 225-232. DOI: 10.1111/J.1475-1305.2006.00282.X |
0.824 |
|
| 2006 |
Launey ME, Busch R, Kruzic JJ. Influence of structural relaxation on the fatigue behavior of a Zr 41.25Ti13.75Ni10Cu12.5Be 22.5 bulk amorphous alloy Scripta Materialia. 54: 483-487. DOI: 10.1016/J.Scriptamat.2005.09.048 |
0.389 |
|
| 2006 |
Nalla RK, Kruzic JJ, Kinney JH, Balooch M, Ager JW, Ritchie RO. Role of microstructure in the aging-related deterioration of the toughness of human cortical bone Materials Science and Engineering C. 26: 1251-1260. DOI: 10.1016/J.Msec.2005.08.021 |
0.828 |
|
| 2005 |
Nalla RK, Balooch M, Ager JW, Kruzic JJ, Kinney JH, Ritchie RO. Effects of polar solvents on the fracture resistance of dentin: role of water hydration. Acta Biomaterialia. 1: 31-43. PMID 16701778 DOI: 10.1016/J.Actbio.2004.08.002 |
0.759 |
|
| 2005 |
Kruzic JJ, Kuskowski SJ, Ritchie RO. Simple and accurate fracture toughness testing methods for pyrolytic carbon/graphite composites used in heart-valve prostheses. Journal of Biomedical Materials Research. Part A. 74: 461-4. PMID 15973730 DOI: 10.1002/Jbm.A.30380 |
0.62 |
|
| 2005 |
Imbeni V, Kruzic JJ, Marshall GW, Marshall SJ, Ritchie RO. The dentin-enamel junction and the fracture of human teeth. Nature Materials. 4: 229-32. PMID 15711554 DOI: 10.1038/Nmat1323 |
0.728 |
|
| 2005 |
Nalla RK, Kruzic JJ, Kinney JH, Ritchie RO. Aspects of in vitro fatigue in human cortical bone: time and cycle dependent crack growth. Biomaterials. 26: 2183-95. PMID 15576194 DOI: 10.1016/J.Biomaterials.2004.05.024 |
0.828 |
|
| 2005 |
Kruzic JJ, Nalla RK, Kinney JH, Ritchie RO. Mechanistic aspects of in vitro fatigue-crack growth in dentin. Biomaterials. 26: 1195-204. PMID 15451639 DOI: 10.1016/J.Biomaterials.2004.04.051 |
0.821 |
|
| 2005 |
Nalla RK, Kruzic JJ, Kinney JH, Ritchie RO. Mechanistic aspects of fracture and R-curve behavior in human cortical bone. Biomaterials. 26: 217-31. PMID 15207469 DOI: 10.1016/J.Biomaterials.2004.02.017 |
0.836 |
|
| 2005 |
Schneibel JH, Brady MP, Kruzic JJ, Ritchie RO. On the improvement of the ductility of molybdenum by spinel (MgAl2O4) particles Zeitschrift FüR Metallkunde. 96: 632-637. DOI: 10.3139/146.101081 |
0.549 |
|
| 2005 |
Kruzic JJ, Cannon RM, Ritchie RO. Effects of moisture on grain-boundary strength, fracture, and fatigue properties of alumina Journal of the American Ceramic Society. 88: 2236-2245. DOI: 10.1111/J.1551-2916.2005.00434.X |
0.716 |
|
| 2005 |
Ritchie RO, Kinney JH, Kruzic JJ, Nalla RK. A fracture mechanics and mechanistic approach to the failure of cortical bone Fatigue and Fracture of Engineering Materials and Structures. 28: 345-371. DOI: 10.1111/J.1460-2695.2005.00878.X |
0.816 |
|
| 2005 |
Kruzic JJ, Cannon RM, Ager JW, Ritchie RO. Fatigue threshold R-curves for predicting reliability of ceramics under cyclic loading Acta Materialia. 53: 2595-2605. DOI: 10.1016/J.Actamat.2005.02.018 |
0.695 |
|
| 2005 |
Schneibel JH, Tortorelli PF, Ritchie RO, Kruzic JJ. Optimization of Mo-Si-B intermetallic alloys Metallurgical and Materials Transactions A. 36: 525-531. DOI: 10.1007/S11661-005-0166-4 |
0.501 |
|
| 2005 |
Kruzic JJ, Schneibel JH, Ritchie RO. Ambient- to elevated-temperature fracture and fatigue properties of Mo-Si-B alloys: Role of microstructure Metallurgical and Materials Transactions A. 36: 2393-2402. DOI: 10.1007/S11661-005-0112-5 |
0.696 |
|
| 2005 |
Kruzic JJ, Schneibel JH, Ritchie RO. Role of microstructure in promoting fracture and fatigue resistance in Mo-Si-B alloys Materials Research Society Symposium Proceedings. 842: 303-308. |
0.448 |
|
| 2005 |
Kruzic JJ, Schneibel JH, Ritchie RO. Ambient- to elevated-temperature fracture and fatigue properties of Mo-Si-B alloys: Role of microstructure Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 2393-2402. |
0.532 |
|
| 2005 |
Ritchie RO, Nalla RK, Kruzic JJ, Kinney JH. Time vs. cycle dependence of ex vivo fatigue in human cortical bone 11th International Conference On Fracture 2005, Icf11. 4: 2831-2836. |
0.788 |
|
| 2005 |
Kruzic JJ, Cannon RM, Ritchie RO. Fatigue of bridging ceramics: Understanding crack size effects 11th International Conference On Fracture 2005, Icf11. 4: 2629-2634. |
0.552 |
|
| 2005 |
Kruzic JJ, Nalla RK, Ritchie RO, Kinney JH. Fracture properties of cortical bone and dentin Ceramic Transactions. 164: 53-62. |
0.81 |
|
| 2005 |
Nalla RK, Kruzic JJ, Kinney JH, Balooch M, Ager JW, Martin MC, Tomsia AP, Ritchie RO. Effects of aging on the toughness of human cortical bone: A study from nano to macro size-scales Materials Research Society Symposium Proceedings. 844: 53-58. |
0.8 |
|
| 2004 |
Nalla RK, Kruzic JJ, Kinney JH, Ritchie RO. Effect of aging on the toughness of human cortical bone: evaluation by R-curves. Bone. 35: 1240-6. PMID 15589205 DOI: 10.1016/J.Bone.2004.07.016 |
0.832 |
|
| 2004 |
Nalla RK, Kruzic JJ, Ritchie RO. On the origin of the toughness of mineralized tissue: microcracking or crack bridging? Bone. 34: 790-8. PMID 15121010 DOI: 10.1016/J.Bone.2004.02.001 |
0.84 |
|
| 2004 |
Nalla RK, Kruzic JJ, Kinney JH, Balooch M, Ager JW, Martin MC, Tomsia AP, Ritchie RO. Effects of Aging on the Toughness of Human Cortical Bone: A Study from Nano to Macro Size-Scales Mrs Proceedings. 844. DOI: 10.1557/Proc-844-Y8.10 |
0.829 |
|
| 2004 |
Kruzic JJ, Schneibel JH, Ritchie RO. Role of Microstructure in Promoting Fracture and Fatigue Resistance in Mo-Si-B Alloys Mrs Proceedings. 842. DOI: 10.1557/Proc-842-S2.9 |
0.637 |
|
| 2004 |
Nalla RK, Kruzic JJ, Kinney JH, Ritchie RO. Mechanistic Aspects of Fracture of Human Cortical Bone Mrs Proceedings. 823. DOI: 10.1557/Proc-823-W8.2 |
0.843 |
|
| 2004 |
Kruzic JJ, Cannon RM, Ritchie RO. Crack-Size Effects on Cyclic and Monotonic Crack Growth in Polycrystalline Alumina: Quantification of the Role of Grain Bridging Journal of the American Ceramic Society. 87: 93-103. DOI: 10.1111/J.1551-2916.2004.00093.X |
0.69 |
|
| 2004 |
Ritchie RO, Kruzic JJ, Muhlstein CL, Nalla RK, Stach EA. Characteristic dimensions and the micro-mechanisms of fracture and fatigue in 'nano' and 'bio' materials International Journal of Fracture. 128: 1-15. DOI: 10.1023/B:Frac.0000040958.04896.43 |
0.771 |
|
| 2004 |
Kruzic JJ, McNaney JM, Cannon RM, Ritchie RO. Effects of plastic constraint on the cyclic and static fatigue behavior of metal/ceramic layered structures Mechanics of Materials. 36: 57-72. DOI: 10.1016/S0167-6636(03)00031-0 |
0.642 |
|
| 2004 |
Kruzic JJ, Schneibel JH, Ritchie RO. Fracture and fatigue resistance of Mo-Si-B alloys for ultrahigh-temperature structural applications Scripta Materialia. 50: 459-464. DOI: 10.1016/J.Scriptamat.2003.11.002 |
0.568 |
|
| 2004 |
Kruzic JJ, Ritchie RO. An experimental assessment of using crack-opening displacements to determine indentation toughness from vickers indents Ceramic Transactions. 156: 83-91. |
0.679 |
|
| 2004 |
Nalla RK, Kruzic JJ, Kinney JH, Ritchie RO. Mechanistic aspects of fracture of human cortical bone Materials Research Society Symposium - Proceedings. 823: 91-96. |
0.819 |
|
| 2004 |
Kruzic JJ, Cannon RM, Ritchie RO. Crack-size effects on cyclic and monotonic crack growth in polycrystalline alumina: Quantification of the role of grain bridging Journal of the American Ceramic Society. 87: 93-103. |
0.522 |
|
| 2003 |
Kruzic JJ, Nalla RK, Kinney JH, Ritchie RO. Crack blunting, crack bridging and resistance-curve fracture mechanics in dentin: effect of hydration. Biomaterials. 24: 5209-21. PMID 14568438 DOI: 10.1016/S0142-9612(03)00458-7 |
0.83 |
|
| 2003 |
Kruzic JJ, Ritchie RO. Determining the toughness of ceramics from vickers indentations using the crack-opening displacements: An experimental study Journal of the American Ceramic Society. 86: 1433-1436. DOI: 10.1111/J.1151-2916.2003.Tb03490.X |
0.721 |
|
| 2003 |
Yuan R, Kruzic JJ, Zhang XF, De Jonghe LC, Ritchie RO. Ambient to high-temperature fracture toughness and cyclic fatigue behavior in Al-containing silicon carbide ceramics Acta Materialia. 51: 6477-6491. DOI: 10.1016/J.Actamat.2003.08.038 |
0.672 |
|
| 2002 |
Schneibel JH, Tortorelli PF, Kramer MJ, Thom AJ, Kruzic JJ, Ritchie RO. Optimization of Mo-Si-B Intermetallics Mrs Proceedings. 753. DOI: 10.1557/Proc-753-Bb2.2 |
0.53 |
|
| 2002 |
Kruzic JJ, Marks RA, Yoshiya M, Glaeser AM, Cannon RM, Ritchie RO. Fracture and fatigue behavior at ambient and elevated temperatures of alumina bonded with copper/niobium/copper interlayers Journal of the American Ceramic Society. 85: 2531-2541. DOI: 10.1111/J.1151-2916.2002.Tb00491.X |
0.725 |
|
| 2001 |
Kruzic JJ, McNaney JM, Cannon RM, Ritchie RO. Time dependent debonding of aluminum/alumina interfaces under cyclic and static loading Materials Research Society Symposium - Proceedings. 654. |
0.524 |
|
| 2000 |
Kruzic JJ, McNaney JM, Cannon RM, Ritchie RO. Time Dependent Debonding of Aluminum/Alumina Interfaces under Cyclic and Static Loading Mrs Proceedings. 654. DOI: 10.1557/Proc-654-Aa4.10.1 |
0.664 |
|
| 1999 |
Kruzic J, Campbell J, Ritchie R. On the fatigue behavior of γ-based titanium aluminides: role of small cracks Acta Materialia. 47: 801-816. DOI: 10.1016/S1359-6454(98)00409-1 |
0.708 |
|
| 1999 |
Kruzic JJ, Campbell JP, Ritchie RO. Fatigue-crack propagation in gamma-based titanium aluminide alloys at large and small crack sizes Materials Research Society Symposium - Proceedings. 552. |
0.501 |
|
| 1999 |
Kruzic JJ, Campbell JP, Ritchie RO. On the fatigue behavior of γ-based titanium aluminides: Role of small cracks Acta Materialia. 47: 801-816. |
0.486 |
|
| 1998 |
Kruzic JJ, Campbell JP, Ritchie RO. Fatigue-Crack Propagation in Gamma-Based Titanium Aluminide Alloys at Large and Small Crack Sizes Mrs Proceedings. 552. DOI: 10.1557/Proc-552-Kk2.3.1 |
0.712 |
|
| 1997 |
Campbell J, Kruzic J, Lillibridge S, Rao KV, Ritchie R. On the growth of small fatigue cracks in γ-based titanium aluminides Scripta Materialia. 37: 707-712. DOI: 10.1016/S1359-6462(97)00154-1 |
0.675 |
|
| 1997 |
Campbell JP, Kruzic JJ, Lillibridge S, Venkateswara Rao KT, Ritchie RO. On the growth of small fatigue cracks in γ-based titanium aluminides Scripta Materialia. 37: 707-712. |
0.497 |
|
| Show low-probability matches. |