Year |
Citation |
Score |
2020 |
Ledesma R, Palmieri F, Connell J. Laser induced breakdown spectroscopy of polymer matrix composites for real-time analysis of trace surface contaminants: A review International Journal of Adhesion and Adhesives. 98: 102528. DOI: 10.1016/J.Ijadhadh.2019.102528 |
0.341 |
|
2020 |
Marx JC, Robbins SJ, Grady ZA, Palmieri FL, Wohl CJ, Rabiei A. Polymer infused composite metal foam as a potential aircraft leading edge material Applied Surface Science. 505: 144114. DOI: 10.1016/J.Apsusc.2019.144114 |
0.345 |
|
2018 |
Ledesma R, Palmieri F, Connell J, Yost W, Fitz-Gerald J. Surface characterization of carbon fiber reinforced polymers by picosecond laser induced breakdown spectroscopy. Spectrochimica Acta. Part B, Atomic Spectroscopy. 140: 5-12. PMID 32514224 DOI: 10.1016/J.Sab.2017.11.014 |
0.311 |
|
2016 |
Palmieri FL, Belcher MA, Wohl CJ, Blohowiak KY, Connell JW. Laser ablation surface preparation for adhesive bonding of carbon fiber reinforced epoxy composites International Journal of Adhesion and Adhesives. 68: 95-101. DOI: 10.1016/J.Ijadhadh.2016.02.007 |
0.302 |
|
2009 |
Chauhan S, Palmieri F, Bonnecaze RT, Willson CG. Feature filling modeling for step and flash imprint lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 27: 1926-1932. DOI: 10.1116/1.3147212 |
0.514 |
|
2009 |
Chauhan S, Palmieri F, Bonnecaze RT, Willson CG. Pinning at template feature edges for step and flash imprint lithography Journal of Applied Physics. 106. DOI: 10.1063/1.3122599 |
0.537 |
|
2008 |
Chao BH, Palmieri F, Jen WL, McMichael DH, Willson CG, Owens J, Berger R, Sotoodeh K, Wilks B, Pham J, Carpio R, LaBelle E, Wetzel J. Dual damascene BEOL processing using multilevel step and flash imprint lithography Proceedings of Spie - the International Society For Optical Engineering. 6921. DOI: 10.1117/12.772908 |
0.687 |
|
2008 |
Irmscher M, Butschke J, Carpio R, Chao B, Jen WL, Koepernik C, Nedelmann L, Owens J, Palmieri F, Pritschow M, Reuter C, Sailer H, Sotoodeh K, Wetzel J, Wilks B, et al. High resolution nanoimprint templates for dual damascene - Fabrication and imprint results Proceedings of Spie - the International Society For Optical Engineering. 6921. DOI: 10.1117/12.772295 |
0.432 |
|
2008 |
Heath WH, Palmieri F, Adams JR, Long BK, Chute J, Holcombe TW, Zieren S, Truitt MJ, White JL, Willson CG. Degradable cross-linkers and strippable imaging materials for step-and-flash imprint lithography Macromolecules. 41: 719-726. DOI: 10.1021/Ma702291K |
0.721 |
|
2007 |
Palmieri F, Adams J, Long B, Heath W, Tsiartas P, Willson CG. Design of reversible cross-linkers for step and flash imprint lithography imprint resists. Acs Nano. 1: 307-12. PMID 19206681 DOI: 10.1021/Nn7001079 |
0.737 |
|
2007 |
Hao J, Lin MW, Palmieri F, Nishimura Y, Chao HL, Steward MD, Collins A, Jen K, Willson CG. Photocurable silicon-based materials for imprint lithography Proceedings of Spie - the International Society For Optical Engineering. 6517. DOI: 10.1117/12.712261 |
0.625 |
|
2007 |
Jen WL, Palmieri F, Chao B, Lin M, Hao J, Owens J, Sotoodeh K, Cheung R, Willson CG. Multi-level step and flash imprint lithography for direct patterning of dielectrics Proceedings of Spie - the International Society For Optical Engineering. 6517. DOI: 10.1117/12.711602 |
0.557 |
|
2007 |
Palmieri F, Stewart M, Jen K, Willson CG, Schmid G. Step-and-flash imprint lithography for patterning interconnect dielectrics Solid State Technology. 50: 42-45. |
0.413 |
|
2006 |
Lin MW, Chao HL, Hao J, Kim EK, Palmieri F, Kim WC, Dickey M, Ho PS, Willson CG. Planarization for reverse-tone step and flash imprint lithography Proceedings of Spie - the International Society For Optical Engineering. 6151. DOI: 10.1117/12.655626 |
0.531 |
|
2006 |
Jen W, Palmieri F, Chao B, Lin M, Hao J, Owens J, Sotoodeh K, Cheung R, Willson CG. Multi-level Step and Flash Imprint Lithography for Direct Patterning of Dielectrics Proceedings of Spie. 6517. DOI: 10.1117/12.655604 |
0.564 |
|
2006 |
Schmid GM, Stewart MD, Wetzel J, Palmieri F, Hao J, Nishimura Y, Jen K, Kim EK, Resnick DJ, Liddle JA, Willson CG. Implementation of an imprint damascene process for interconnect fabrication Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 24: 1283-1291. DOI: 10.1116/1.2197508 |
0.774 |
|
2005 |
MacDonald S, Hughes G, Stewart M, Palmieri F, Willson CG. Design and fabrication of highly complex topographic nano-imprint template for dual damascene full 3-D imprinting Proceedings of Spie - the International Society For Optical Engineering. 5992. DOI: 10.1117/12.632312 |
0.39 |
|
2005 |
Stewart MD, Wetzel JT, Schmid GM, Palmieri F, Thompson E, Kim EK, Wang D, Sotodeh K, Jen K, Johnson SC, Hao J, Dickey MD, Nishimura Y, Laine RM, Resnick DJ, et al. Direct imprinting of dielectric materials for dual damascene processing Progress in Biomedical Optics and Imaging - Proceedings of Spie. 5751: 210-218. DOI: 10.1117/12.599977 |
0.743 |
|
2005 |
Kim EK, Stewart MD, Wu K, Palmieri FL, Dickey MD, Ekerdt JG, Willson CG. Vinyl ether formulations for step and flash imprint lithography Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 23: 2967-2971. DOI: 10.1116/1.2131881 |
0.73 |
|
2005 |
Stewart MD, Wetzel J, Palmieri F, Hao J, Schmid GM, Jen K, Nishimura Y, Willson CG. Interconnect patterning in a single step with multi-level nanoimprint lithography 2005 Proceedings - 22nd International Vlsi Multilevel Interconnection Conference, Vmic 2005. 497-502. |
0.752 |
|
2002 |
Watson KA, Palmieri FL, Connell JW. Space environmentally stable polyimides and copolyimides derived from [2,4-bis(3-aminophenoxy)phenyl] diphenylphosphine oxide Macromolecules. 35: 4968-4974. DOI: 10.1021/Ma0201779 |
0.376 |
|
2001 |
Watson KA, Connell JW, Palmieri FL. Space environmentally stable polyimides and copolyimides derived from [2,4-bis(3-aminophenoxy)phenyl]-diphenylphosphine oxide International Sampe Symposium and Exhibition (Proceedings). 46: 1853-1863. |
0.315 |
|
Low-probability matches (unlikely to be authored by this person) |
2018 |
Ledesma R, Yost W, Palmieri F, Cataldo D, Connell J. Correlation of optically stimulated electron emission with failure mode of adhesively bonded epoxy composites International Journal of Adhesion and Adhesives. 84: 257-264. DOI: 10.1016/J.Ijadhadh.2018.04.003 |
0.292 |
|
2013 |
Palmieri FL, Watson KA, Morales G, Williams T, Hicks R, Wohl CJ, Hopkins JW, Connell JW. Laser ablative surface treatment for enhanced bonding of Ti-6Al-4V alloy. Acs Applied Materials & Interfaces. 5: 1254-61. PMID 23317556 DOI: 10.1021/Am302293M |
0.282 |
|
2012 |
Knight GA, Hou TH, Belcher MA, Palmieri FL, Wohl CJ, Connell JW. Hygrothermal aging of composite single lap shear specimens comprised of AF-555M adhesive and T800H/3900-2 adherends International Journal of Adhesion and Adhesives. 39: 1-7. DOI: 10.1016/J.Ijadhadh.2012.06.009 |
0.277 |
|
2020 |
Ledesma RI, Palmieri FL, Lin Y, Belcher MA, Ferriell DR, Thomas SK, Connell JW. Picosecond laser surface treatment and analysis of thermoplastic composites for structural adhesive bonding Composites Part B: Engineering. 191: 107939. DOI: 10.1016/J.Compositesb.2020.107939 |
0.276 |
|
2012 |
Belvin WK, Zander ME, Sleight DW, Connell J, Holloway N, Palmieri F. Materials, structures and manufacturing: An integrated approach to develop expandable structures Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.267 |
|
2018 |
Ledesma R, Palmieri F, Campbell B, Yost W, Fitz-Gerald J, Dillingham G, Connell J. EXPRESS: Correlation of Trace Silicone Contamination Analyses on Epoxy Composites Using X-ray Photoelectron Spectroscopy (XPS) and Laser Induced Breakdown Spectroscopy (LIBS). Applied Spectroscopy. 3702818809928. PMID 30345794 DOI: 10.1177/0003702818809928 |
0.262 |
|
2011 |
Wohl CJ, Connell JW, Lin Y, Belcher MA, Palmieri FL, Atkins BM. Generation and evaluation of lunar dust adhesion mitigating materials 3rd Aiaa Atmospheric Space Environments Conference. |
0.236 |
|
2015 |
Cisotto A, Palmieri FL, Saini A, Lin Y, Thurman CS, Kim J, Kim T, Connell JW, Zhu Y, Gopalarathnam A, Jiang X, Wohl CJ. Shear stress sensing with elastic microfence structures 31st Aiaa Aerodynamic Measurement Technology and Ground Testing Conference. |
0.228 |
|
2017 |
Kim T, Saini A, Kim J, Gopalarathnam A, Zhu Y, Palmieri FL, Wohl CJ, Jiang X. Piezoelectric Floating Element Shear Stress Sensor for the Wind Tunnel Flow Measurement Ieee Transactions On Industrial Electronics. 64: 7304-7312. DOI: 10.1109/Tie.2016.2630670 |
0.227 |
|
2019 |
Palmieri FL, Ledesma RI, Dennie JG, Kramer TJ, Lin Y, Hopkins JW, Wohl CJ, Connell JW. Optimized surface treatment of aerospace composites using a picosecond laser Composites Part B: Engineering. 175: 107155. DOI: 10.1016/J.Compositesb.2019.107155 |
0.224 |
|
2016 |
Kim T, Saini A, Kim J, Gopalarathnam A, Zhu Y, Palmieri FL, Wohl CJ, Jiang X. A piezoelectric shear stress sensor Proceedings of Spie. 9803. DOI: 10.1117/12.2219185 |
0.213 |
|
2012 |
Palmieri FL, Watson KA, Morales G, Williams T, Hicks R, Wohl CJ, Hopkins JW, Connell JW. Laser ablation surface preparation of Ti-6AL-4V for adhesive bonding International Sampe Technical Conference. |
0.171 |
|
2017 |
Kim T, Saini A, Kim J, Gopalarathnam A, Zhu Y, Palmieri FL, Wohl CJ, Jiang X. Piezoelectric Floating Element Shear Stress Sensor for the Wind Tunnel Flow Measurement. Ieee Transactions On Industrial Electronics (1982). 64: 7304-7312. PMID 33479553 DOI: 10.1109/TIE.2016.2630670 |
0.08 |
|
2013 |
Palmieri FL, Belcher MA, Wohl CJ, Blohowiak KY, Connell JW. Laser ablation surface preparation of carbon fiber reinforced epoxy composites for adhesive bonding International Sampe Technical Conference. 554-566. |
0.061 |
|
2014 |
Palmieri FL, Crow A, Zetterberg A, Hopkins J, Wohl CJ, Connell JW, Belcher MA, Blohowiak KY. Further investigation into the use of laser surface preparation of TI-6AL-4V alloy for adhesive bonding International Sampe Technical Conference. |
0.041 |
|
Hide low-probability matches. |