| Year |
Citation |
Score |
| 2020 |
Férec J, Mezi D, Advani SG, Ausias G. Axisymmetric flow simulations of fiber suspensions as described by 3D probability distribution function Journal of Non-Newtonian Fluid Mechanics. 284: 104367. DOI: 10.1016/J.Jnnfm.2020.104367 |
0.436 |
|
| 2020 |
Sun J, Gargitter V, Pei S, Wang T, Yan Y, Advani SG, Wang L, Chou T. Mechanical and electrochemical performance of hybrid laminated structural composites with carbon fiber/ solid electrolyte supercapacitor interleaves Composites Science and Technology. 196: 108234. DOI: 10.1016/J.Compscitech.2020.108234 |
0.372 |
|
| 2020 |
Šimáček P, Advani SG. A continuum approach for consolidation modeling in composites processing Composites Science and Technology. 186: 107892. DOI: 10.1016/J.Compscitech.2019.107892 |
0.445 |
|
| 2020 |
Kermani NN, Simacek P, Advani SG. A Bond-line Porosity Model that Integrates Fillet Shape and Prepreg Facesheet Consolidation during Equilibrated Co-cure of Sandwich Composite Structures Composites Part a-Applied Science and Manufacturing. 139: 106071. DOI: 10.1016/J.Compositesa.2020.106071 |
0.314 |
|
| 2020 |
Maguire JM, Simacek P, Advani SG, Ó Brádaigh CM. Novel epoxy powder for manufacturing thick-section composite parts under vacuum-bag-only conditions. Part I: Through-thickness process modelling Composites Part a: Applied Science and Manufacturing. 136: 105969. DOI: 10.1016/J.Compositesa.2020.105969 |
0.417 |
|
| 2020 |
Godbole MG, Gururaja S, Joshi M, Advani S. A semi-analytical model to characterize single ply and multiple plies UD-fabric permeability Composites Part a: Applied Science and Manufacturing. 136: 105951. DOI: 10.1016/J.Compositesa.2020.105951 |
0.469 |
|
| 2020 |
Kermani NN, Simacek P, Advani SG. Porosity predictions during co-cure of honeycomb core prepreg sandwich structures Composites Part a: Applied Science and Manufacturing. 132: 105824. DOI: 10.1016/J.Compositesa.2020.105824 |
0.315 |
|
| 2020 |
Barari B, Simacek P, Yarlagadda S, Crane RM, Advani SG. Prediction of process-induced void formation in anisotropic Fiber-reinforced autoclave composite parts International Journal of Material Forming. 13: 143-158. DOI: 10.1007/S12289-019-01477-4 |
0.412 |
|
| 2019 |
Yun M, Argerich Martin C, Giormini P, Chinesta F, Advani S. Learning the Macroscopic Flow Model of Short Fiber Suspensions from Fine-Scale Simulated Data. Entropy (Basel, Switzerland). 22. PMID 33285805 DOI: 10.3390/e22010030 |
0.316 |
|
| 2019 |
Yun M, Argerich Martin C, Giormini P, Chinesta F, Advani S. Learning the Macroscopic Flow Model of Short Fiber Suspensions from Fine-Scale Simulated Data Entropy. 22: 30. DOI: 10.3390/E22010030 |
0.429 |
|
| 2019 |
Sas HS, Simacek P, Advani SG. A METHODOLOGY TO CHARACTERIZE FIBER PREFORM PERMEABILITY BY USING KARDAR–PARISI–ZHANG EQUATION Journal of Porous Media. 22: 799-811. DOI: 10.1615/Jpormedia.2019021772 |
0.346 |
|
| 2019 |
Hancioglu M, Sozer EM, Advani SG. Comparison of in-plane resin transfer molding and vacuum-assisted resin transfer molding ‘effective’ permeabilities based on mold filling experiments and simulations Journal of Reinforced Plastics and Composites. 39: 31-44. DOI: 10.1177/0731684419868015 |
0.432 |
|
| 2019 |
Yu H, Advani S, Heider D. Impact of resin-rich layer on the through-thickness resistivity of carbon fiber reinforced polymers Journal of Composite Materials. 53: 3469-3481. DOI: 10.1177/0021998319842369 |
0.408 |
|
| 2019 |
Mezi D, Ausias G, Advani SG, Férec J. Fiber suspension in 2D nonhomogeneous flow: The effects of flow/fiber coupling for Newtonian and power-law suspending fluids Journal of Rheology. 63: 405-418. DOI: 10.1122/1.5081016 |
0.45 |
|
| 2019 |
May D, Aktas A, Advani S, Berg D, Endruweit A, Fauster E, Lomov S, Long A, Mitschang P, Abaimov S, Abliz D, Akhatov I, Ali M, Allen T, Bickerton S, et al. In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise Composites Part a: Applied Science and Manufacturing. 121: 100-114. DOI: 10.1016/J.Compositesa.2019.03.006 |
0.33 |
|
| 2019 |
Bodaghi M, Lomov S, Simacek P, Correia N, Advani S. On the variability of permeability induced by reinforcement distortions and dual scale flow in liquid composite moulding: A review Composites Part a: Applied Science and Manufacturing. 120: 188-210. DOI: 10.1016/J.Compositesa.2019.03.004 |
0.42 |
|
| 2019 |
Godbole MG, Purandare R, Harshe R, Hood A, Gururaja S, Joshi M, Advani S. Influence of filament distribution on transverse tow permeability: Model predictions and experimental validation Composites Part a: Applied Science and Manufacturing. 118: 150-161. DOI: 10.1016/J.Compositesa.2018.12.024 |
0.427 |
|
| 2019 |
Bodaghi M, Simacek P, Correia N, Advani SG. Experimental parametric study of flow‐induced fiber washout during high‐injection‐pressure resin transfer molding Polymer Composites. 41: 1053-1065. DOI: 10.1002/Pc.25437 |
0.396 |
|
| 2018 |
Scheuer A, Ammar A, Abisset-Chavanne E, Cueto E, Chinesta F, Keunings R, Advani SG. Data-Driven Upscaling of Orientation Kinematics in Suspensions of Rigid Fibres Computer Modeling in Engineering & Sciences. 117: 367-386. DOI: 10.31614/Cmes.2018.04278 |
0.303 |
|
| 2018 |
Lindemer MD, Advani SG, Prasad AK. Lattice Boltzmann Simulation of a Gas-to-Solid Reaction and Precipitation Process in a Circular Tube Computer Modeling in Engineering & Sciences. 117: 527-553. DOI: 10.31614/Cmes.2018.00481 |
0.322 |
|
| 2018 |
Yu H, Sun J, Heider D, Advani S. Experimental investigation of through-thickness resistivity of unidirectional carbon fiber tows Journal of Composite Materials. 53: 2993-3003. DOI: 10.1177/0021998318809837 |
0.386 |
|
| 2018 |
Siddig NA, Binetruy C, Syerko E, Simacek P, Advani S. A new methodology for race-tracking detection and criticality in resin transfer molding process using pressure sensors Journal of Composite Materials. 52: 4087-4103. DOI: 10.1177/0021998318774829 |
0.328 |
|
| 2018 |
Yun M, Lopez E, Chinesta F, Advani S. Manifold embedding of heterogeneity in permeability of a woven fabric for optimization of the VARTM process Composites Science and Technology. 168: 238-245. DOI: 10.1016/J.Compscitech.2018.10.006 |
0.382 |
|
| 2018 |
Yun M, Simacek P, Binetruy C, Advani S. Random field generation of stochastically varying through the thickness permeability of a plain woven fabric Composites Science and Technology. 159: 199-207. DOI: 10.1016/J.Compscitech.2018.02.035 |
0.41 |
|
| 2018 |
Bancora S, Binetruy C, Advani S, Syerko E, Comas-Cardona S. Effective permeability averaging scheme to address in-plane anisotropy effects in multi-layered preforms Composites Part a: Applied Science and Manufacturing. 113: 359-369. DOI: 10.1016/J.Compositesa.2018.07.025 |
0.39 |
|
| 2018 |
Šimáček P, Advani SG. A micromechanics model to predict extensional viscosity of aligned long discontinuous fiber suspensions International Journal of Material Forming. 12: 777-791. DOI: 10.1007/S12289-018-1447-Y |
0.421 |
|
| 2018 |
Simacek P, Advani SG. Resin flow modeling in compliant porous media: an efficient approach for liquid composite molding International Journal of Material Forming. 11: 503-515. DOI: 10.1007/S12289-017-1360-9 |
0.457 |
|
| 2018 |
Martin FA, Warrior NA, Simacek P, Advani S, Hughes A, Darlington R, Senan E. Simulation and Validation of Injection-Compression Filling Stage of Liquid Moulding with Fast Curing Resins Applied Composite Materials. 26: 41-63. DOI: 10.1007/S10443-018-9682-4 |
0.398 |
|
| 2017 |
Heidary H, Kermani MJ, Prasad AK, Advani SG, Dabir B. Numerical modelling of in-line and staggered blockages in parallel flowfield channels of PEM fuel cells International Journal of Hydrogen Energy. 42: 2265-2277. DOI: 10.1016/J.Ijhydene.2016.10.076 |
0.327 |
|
| 2017 |
Yun M, Carella T, Simacek P, Advani S. Stochastic modeling of through the thickness permeability variation in a fabric and its effect on void formation during Vacuum Assisted Resin Transfer Molding Composites Science and Technology. 149: 100-107. DOI: 10.1016/J.Compscitech.2017.06.016 |
0.437 |
|
| 2017 |
Wang J, Simacek P, Advani S. Use of medial axis to find optimal channel designs to reduce mold filling time in resin transfer molding Composites Part a: Applied Science and Manufacturing. 95: 161-172. DOI: 10.1016/J.Compositesa.2017.01.003 |
0.365 |
|
| 2017 |
Yun M, Sas H, Simacek P, Advani SG. Characterization of 3D fabric permeability with skew terms Composites Part a: Applied Science and Manufacturing. 97: 51-59. DOI: 10.1016/J.Compositesa.2016.12.030 |
0.395 |
|
| 2017 |
Yeager M, Simacek P, Advani SG. Role of fiber distribution and air evacuation time on capillary driven flow into fiber tows Composites Part a: Applied Science and Manufacturing. 93: 144-152. DOI: 10.1016/J.Compositesa.2016.11.016 |
0.464 |
|
| 2016 |
Gangloff JJ, Cender TA, Eskizeybek V, Simacek P, Advani SG. Entrapment and venting of bubbles during vacuum bag prepreg processing Journal of Composite Materials. 51: 2757-2768. DOI: 10.1177/0021998316676325 |
0.799 |
|
| 2016 |
Ghnatios C, Abisset-Chavanne E, Binetruy C, Chinesta F, Advani S. 3D modeling of squeeze flow of multiaxial laminates Journal of Non-Newtonian Fluid Mechanics. 234: 188-200. DOI: 10.1016/J.Jnnfm.2016.06.004 |
0.439 |
|
| 2016 |
Yeager M, Hwang WR, Advani SG. Prediction of capillary pressure for resin flow between fibers Composites Science and Technology. 126: 130-138. DOI: 10.1016/J.Compscitech.2016.02.014 |
0.428 |
|
| 2016 |
Wang J, Simacek P, Advani SG. Use of Centroidal Voronoi Diagram to find optimal gate locations to minimize mold filling time in resin transfer molding Composites Part a: Applied Science and Manufacturing. 87: 243-255. DOI: 10.1016/J.Compositesa.2016.04.026 |
0.33 |
|
| 2016 |
Simacek P, Advani SG. "equivalent" permeability and flow in compliant porous media Composites Part a: Applied Science and Manufacturing. 80: 107-110. DOI: 10.1016/J.Compositesa.2015.10.006 |
0.422 |
|
| 2016 |
Cender TA, Simacek P, Davis S, Advani SG. Gas Evacuation from Partially Saturated Woven Fiber Laminates Transport in Porous Media. 115: 541-562. DOI: 10.1007/S11242-016-0784-X |
0.385 |
|
| 2015 |
Yeager M, Simacek P, Advani S. Multiscale Flow Modeling and Simulation to Predict Void Formation and Transport in Composite Manufacturing Structural Health Monitoring-An International Journal. DOI: 10.12783/Shm2015/110 |
0.495 |
|
| 2015 |
Lindemer MD, Advani SG, Prasad AK. Graetz-Brinkman problem in laminar core-annular flow of two immiscible liquids International Journal of Thermal Sciences. 89: 362-371. DOI: 10.1016/J.Ijthermalsci.2014.11.013 |
0.347 |
|
| 2015 |
Gangloff JJ, Hwang WR, Advani SG. The investigation of bubble mobility in channel flow with wavy porous media walls International Journal of Multiphase Flow. 70: 1-14. DOI: 10.1016/J.Ijmultiphaseflow.2014.11.005 |
0.8 |
|
| 2015 |
Yu H, Heider D, Advani S. Role of in-plane stacking sequence on transverse effective thermal conductivity of unidirectional composite laminates International Journal of Heat and Mass Transfer. 85: 897-903. DOI: 10.1016/J.Ijheatmasstransfer.2015.02.003 |
0.398 |
|
| 2015 |
Cetinbas FC, Advani SG, Prasad AK. Optimization of polymer electrolyte membrane fuel cell catalyst layer with bidirectionally-graded composition Electrochimica Acta. 174: 787-798. DOI: 10.1016/J.Electacta.2015.06.056 |
0.312 |
|
| 2015 |
Yu H, Heider D, Advani S. A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites Composite Structures. 134: 740-749. DOI: 10.1016/J.Compstruct.2015.08.131 |
0.402 |
|
| 2015 |
Yu H, Heider D, Advani S. Comparison of two finite element homogenization prediction approaches for through thickness thermal conductivity of particle embedded textile composites Composite Structures. 133: 719-726. DOI: 10.1016/J.Compstruct.2015.07.037 |
0.325 |
|
| 2015 |
Yu H, Heider D, Advani S. Prediction of effective through-thickness thermal conductivity of woven fabric reinforced composites with embedded particles Composite Structures. 127: 132-140. DOI: 10.1016/J.Compstruct.2015.03.015 |
0.342 |
|
| 2015 |
Sas HS, Šimáček P, Advani SG. A methodology to reduce variability during vacuum infusion with optimized design of distribution media Composites Part a: Applied Science and Manufacturing. 78: 223-233. DOI: 10.1016/J.Compositesa.2015.08.011 |
0.397 |
|
| 2015 |
Simacek P, Advani SG. Simulating tape resin infiltration during thermoset pultrusion process Composites Part a: Applied Science and Manufacturing. 72: 115-126. DOI: 10.1016/J.Compositesa.2015.01.020 |
0.398 |
|
| 2014 |
Sietins JM, Gillespie JW, Advani SG. Transmission electron microscopy of an ultrasonically consolidated copper-aluminum interface Journal of Materials Research. 29: 1970-1977. DOI: 10.1557/Jmr.2014.176 |
0.763 |
|
| 2014 |
Baker AM, Wang L, Johnson WB, Prasad AK, Advani SG. Nafion membranes reinforced with ceria-coated multiwall carbon nanotubes for improved mechanical and chemical durability in polymer electrolyte membrane fuel cells Journal of Physical Chemistry C. 118: 26796-26802. DOI: 10.1021/Jp5078399 |
0.309 |
|
| 2014 |
Koepf EE, Advani SG, Prasad AK. Experimental investigation of ZnO powder flow and feeding characterization for a solar thermochemical reactor Powder Technology. 261: 219-231. DOI: 10.1016/J.Powtec.2014.04.036 |
0.331 |
|
| 2014 |
Yu H, Nonn A, Heider D, Advani S. Model-based characterization and enhancement of the through-thickness thermal conductivity of polymer composites using infrared camera International Journal of Thermal Sciences. 80: 118-125. DOI: 10.1016/J.Ijthermalsci.2014.02.002 |
0.346 |
|
| 2014 |
Gangloff JJ, Daniel C, Advani SG. A model of two-phase resin and void flow during composites processing International Journal of Multiphase Flow. 65: 51-60. DOI: 10.1016/J.Ijmultiphaseflow.2014.05.015 |
0.813 |
|
| 2014 |
Gangloff JJ, Hwang WR, Advani SG. Characterization of bubble mobility in channel flow with fibrous porous media walls International Journal of Multiphase Flow. 60: 76-86. DOI: 10.1016/J.Ijmultiphaseflow.2013.12.003 |
0.795 |
|
| 2014 |
Park J, Wang L, Advani SG, Prasad AK. Mechanical stability of H3PO4-Doped PBI/Hydrophilic-Pretreated PTFE membranes for high temperature PEMFCs Electrochimica Acta. 120: 30-38. DOI: 10.1016/J.Electacta.2013.12.030 |
0.3 |
|
| 2014 |
Sas HS, Wurtzel EB, Simacek P, Advani SG. Effect of relative ply orientation on the through-thickness permeability of unidirectional fabrics Composites Science and Technology. 96: 116-121. DOI: 10.1016/J.Compscitech.2014.03.007 |
0.445 |
|
| 2014 |
Lugo J, Simacek P, Advani SG. Analytic method to estimate multiple equivalent permeability components from a single rectilinear experiment in liquid composite molding processes Composites Part a: Applied Science and Manufacturing. 67: 157-170. DOI: 10.1016/J.Compositesa.2014.08.031 |
0.402 |
|
| 2014 |
Gangloff JJ, Simacek P, Sinha S, Advani SG. A process model for the compaction and saturation of partially impregnated thermoset prepreg tapes Composites Part a: Applied Science and Manufacturing. 64: 234-244. DOI: 10.1016/J.Compositesa.2014.05.010 |
0.797 |
|
| 2014 |
Vernet N, Ruiz E, Advani S, Alms JB, Aubert M, Barburski M, Barari B, Beraud JM, Berg DC, Correia N, Danzi M, Delavière T, Dickert M, Di Fratta C, Endruweit A, et al. Experimental determination of the permeability of engineering textiles: Benchmark II Composites Part a: Applied Science and Manufacturing. 61: 172-184. DOI: 10.1016/J.Compositesa.2014.02.010 |
0.336 |
|
| 2014 |
Cender TA, Gangloff JJ, Simacek P, Advani SG. Void reduction during out-of-autoclave thermoset prepreg composite processing International Sampe Technical Conference. |
0.777 |
|
| 2013 |
Koepf EE, Lindemer MD, Advani SG, Prasad AK. Experimental investigation of vortex flow in a two-chamber solar thermochemical reactor Journal of Fluids Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024965 |
0.331 |
|
| 2013 |
Kelly GS, Advani SG, Gillespie JW, Bogetti TA. A model to characterize acoustic softening during ultrasonic consolidation Journal of Materials Processing Technology. 213: 1835-1845. DOI: 10.1016/J.Jmatprotec.2013.05.008 |
0.314 |
|
| 2013 |
Yu H, Nonn A, Schneiders S, Heider D, Advani SG. An approach to enhance through-thickness thermal conductivity of polymeric fiber composites International Journal of Heat and Mass Transfer. 59: 20-28. DOI: 10.1016/J.Ijheatmasstransfer.2012.11.055 |
0.4 |
|
| 2013 |
Cender TA, Simacek P, Advani SG. Resin film impregnation in fabric prepregs with dual length scale permeability Composites Part a: Applied Science and Manufacturing. 53: 118-128. DOI: 10.1016/J.Compositesa.2013.05.013 |
0.452 |
|
| 2013 |
Simacek P, Advani SG, Gruber M, Jensen B. A non-local void filling model to describe its dynamics during processing thermoplastic composites Composites Part a: Applied Science and Manufacturing. 46: 154-165. DOI: 10.1016/J.Compositesa.2012.10.015 |
0.448 |
|
| 2013 |
Zhang D, Heider D, Advani SG, Gillespie JW. Out of autoclave consolidation of voids in continuous fiber reinforced thermoplastic composites International Sampe Technical Conference. 2327-2342. |
0.307 |
|
| 2012 |
Wang J, Andres E, Simacek P, Advani SG. Use of flow simulation to develop robust injection and vent schemes that account for process and material variability in Liquid Composite Molding process Cmes - Computer Modeling in Engineering and Sciences. 88: 155-181. DOI: 10.3970/Cmes.2012.088.155 |
0.404 |
|
| 2012 |
Park J, Wang L, Advani SG, Prasad AK. Durability analysis of nafion/hydrophilic pretreated PTFE membranes for PEMFCs Journal of the Electrochemical Society. 159: F864-F870. DOI: 10.1149/2.016301Jes |
0.318 |
|
| 2012 |
Brunner DA, Marcks S, Bajpai M, Prasad AK, Advani SG. Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications International Journal of Hydrogen Energy. 37: 4457-4466. DOI: 10.1016/J.Ijhydene.2011.11.116 |
0.35 |
|
| 2012 |
Simacek P, Eksik O, Heider D, Gillespie JW, Advani S. Experimental validation of post-filling flow in vacuum assisted resin transfer molding processes Composites Part a: Applied Science and Manufacturing. 43: 370-380. DOI: 10.1016/J.Compositesa.2011.10.002 |
0.513 |
|
| 2012 |
Walther J, Simacek P, Advani SG. The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites International Journal of Material Forming. 5: 83-97. DOI: 10.1007/S12289-011-1060-9 |
0.488 |
|
| 2012 |
Gascons M, Blanco N, Simacek P, Peiro J, Advani S, Matthys K. Impact of the fibre bed on resin viscosity in liquid composite moulding simulations Applied Composite Materials. 19: 669-688. DOI: 10.1007/S10443-011-9218-7 |
0.418 |
|
| 2012 |
Gangloff JJ, Readdy R, Advani SG. The effects of targeted applied vibrations to promote void reduction during composites processing International Sampe Technical Conference. |
0.754 |
|
| 2011 |
Chandrasekaran VCS, Santare MH, Krishnan P, Advani SG. Amino functionalization of MWNTs and their effect on ILSS of hybrid nanocomposites Composite Interfaces. 18: 339-355. DOI: 10.1163/092764411X584478 |
0.393 |
|
| 2011 |
Catlin G, Advani SG, Prasad AK. Optimization of polymer electrolyte membrane fuel cell flow channels using a genetic algorithm Journal of Power Sources. 196: 9407-9418. DOI: 10.1016/J.Jpowsour.2011.06.073 |
0.323 |
|
| 2011 |
Koellhoffer S, Gillespie JW, Advani SG, Bogetti TA. Role of friction on the thermal development in ultrasonically consolidated aluminum foils and composites Journal of Materials Processing Technology. 211: 1864-1877. DOI: 10.1016/J.Jmatprotec.2011.06.011 |
0.383 |
|
| 2011 |
Hwang WR, Advani SG, Walsh S. Direct simulations of particle deposition and filtration in dual-scale porous media Composites Part a: Applied Science and Manufacturing. 42: 1344-1352. DOI: 10.1016/J.Compositesa.2011.05.017 |
0.324 |
|
| 2011 |
Okonkwo K, Simacek P, Advani SG, Parnas RS. Characterization of 3D fiber preform permeability tensor in radial flow using an inverse algorithm based on sensors and simulation Composites Part a: Applied Science and Manufacturing. 42: 1283-1292. DOI: 10.1016/J.Compositesa.2011.05.010 |
0.436 |
|
| 2011 |
Chandrasekaran VCS, Advani SG, Santare MH. Influence of resin properties on interlaminar shear strength of glass/epoxy/MWNT hybrid composites Composites Part a: Applied Science and Manufacturing. 42: 1007-1016. DOI: 10.1016/J.Compositesa.2011.04.004 |
0.388 |
|
| 2011 |
Alms JB, Advani SG, Glancey JL. Liquid Composite Molding control methodologies using Vacuum Induced Preform Relaxation Composites Part a: Applied Science and Manufacturing. 42: 57-65. DOI: 10.1016/J.Compositesa.2010.10.002 |
0.427 |
|
| 2011 |
Gangloff JJ, Simacek P, Sinha S, Advani SG. A model for wrinkle compaction in thermoset prepreg processing 26th Annual Technical Conference of the American Society For Composites 2011 and the 2nd Joint Us-Canada Conference On Composites. 2: 1193-1202. |
0.754 |
|
| 2011 |
Simacek P, Advani SG. Modeling and simulation of non-isothermal reactive resin flow in liquid composite molding Iccm International Conferences On Composite Materials. |
0.303 |
|
| 2011 |
Gangloff JJ, Sinha S, Advani SG. A model for tow impregnation and consolidation for partially impregnated thermoset prepregs International Sampe Technical Conference. |
0.746 |
|
| 2010 |
Hwang WR, Advani SG. Numerical simulations of Stokes-Brinkman equations for permeability prediction of dual scale fibrous porous media Physics of Fluids. 22. DOI: 10.1063/1.3484273 |
0.429 |
|
| 2010 |
Bubna P, Brunner D, Gangloff JJ, Advani SG, Prasad AK. Analysis, operation and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications Journal of Power Sources. 195: 3939-3949. DOI: 10.1016/J.Jpowsour.2009.12.080 |
0.747 |
|
| 2010 |
Alms JB, Glancey JL, Advani SG. Mechanical properties of composite structures fabricated with the vacuum induced preform relaxation process Composite Structures. 92: 2811-2816. DOI: 10.1016/J.Compstruct.2010.04.007 |
0.477 |
|
| 2010 |
Merotte J, Simacek P, Advani SG. Flow analysis during compression of partially impregnated fiber preform under controlled force Composites Science and Technology. 70: 725-733. DOI: 10.1016/J.Compscitech.2010.01.002 |
0.488 |
|
| 2010 |
Merotte J, Simacek P, Advani SG. Resin flow analysis with fiber preform deformation in through thickness direction during Compression Resin Transfer Molding Composites Part a: Applied Science and Manufacturing. 41: 881-887. DOI: 10.1016/J.Compositesa.2010.03.001 |
0.427 |
|
| 2010 |
Steggall-Murphy C, Simacek P, Advani SG, Yarlagadda S, Walsh S. A model for thermoplastic melt impregnation of fiber bundles during consolidation of powder-impregnated continuous fiber composites Composites Part a: Applied Science and Manufacturing. 41: 93-100. DOI: 10.1016/J.Compositesa.2009.09.026 |
0.475 |
|
| 2010 |
Chandrasekaran VCS, Advani SG, Santare MH. Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites Carbon. 48: 3692-3699. DOI: 10.1016/J.Carbon.2010.06.010 |
0.466 |
|
| 2010 |
Alms JB, Garnier L, Glancey JL, Advani SG. In-plane permeability characterization of the vacuum infusion processes with fiber relaxation International Journal of Material Forming. 3: 1267-1275. DOI: 10.1007/S12289-010-0690-7 |
0.454 |
|
| 2010 |
Simacek P, Neacsu V, Advani SG. A phenomenological model for fiber tow saturation of dual scale fabrics in liquid composite molding Polymer Composites. 31: 1881-1889. DOI: 10.1002/Pc.20982 |
0.799 |
|
| 2010 |
Markicevic B, Nalla A, Navaz HK, Heider D, Walsh S, Advani SG. Closed form solution of resin flow from multiple line gates in liquid composite molding Polymer Composites. 31: 1434-1441. DOI: 10.1002/Pc.20929 |
0.394 |
|
| 2010 |
Martinez F, Simacek P, Advani SG. Comparison of modeling approaches to resin flow simulation in layered draped textile preforms Proceedings of the 10th International Conference On Textile Composites - Texcomp 10: Recent Advances in Textile Composites. 463-471. |
0.371 |
|
| 2009 |
Johnson BB, Santare MH, Novotny JE, Advani SG. WEAR BEHAVIOR OF CARBON NANOTUBE/HIGH DENSITY POLYETHYLENE COMPOSITES. Mechanics of Materials : An International Journal. 41: 1108-1115. PMID 20161101 DOI: 10.1016/J.Mechmat.2009.04.003 |
0.328 |
|
| 2009 |
Zhou F, Advani SG, Wetzel ED. Simulation of the slow drag of a cylinder through a confined pressurized bed of dumbbell and elliptically cylindrical granules using the discrete element method Cmes - Computer Modeling in Engineering and Sciences. 39: 49-66. DOI: 10.3970/Cmes.2009.039.049 |
0.588 |
|
| 2009 |
Alms JB, Yonko PJ, McDowell RC, Advani SG. Design and development of an l-beam from natural composites Journal of Biobased Materials and Bioenergy. 3: 181-187. DOI: 10.1166/Jbmb.2009.1014 |
0.342 |
|
| 2009 |
Simacek P, Heider D, Gillespie JW, Advani S. Post-filling flow in vacuum assisted resin transfer molding processes: Theoretical analysis Composites Part a: Applied Science and Manufacturing. 40: 913-924. DOI: 10.1016/J.Compositesa.2009.04.018 |
0.426 |
|
| 2009 |
Lawrence JM, Neacsu V, Advani SG. Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM Composites Part a: Applied Science and Manufacturing. 40: 1053-1064. DOI: 10.1016/J.Compositesa.2009.04.013 |
0.797 |
|
| 2009 |
Bhat P, Merotte J, Simacek P, Advani SG. Process analysis of compression resin transfer molding Composites Part a: Applied Science and Manufacturing. 40: 431-441. DOI: 10.1016/J.Compositesa.2009.01.006 |
0.358 |
|
| 2009 |
Advani SG, Laird GW. Opportunities and challenges of multiscale modeling and simulation in polymer composite processing International Journal of Material Forming. 2: 39-44. DOI: 10.1007/S12289-009-0601-Y |
0.354 |
|
| 2009 |
Neacsu V, Wang LP, Advani SG. Lattice Boltzmann method and saturation of fiber tows International Sampe Symposium and Exhibition (Proceedings). 54. |
0.782 |
|
| 2009 |
Simacek P, Advani SG. Risk mitigation with liquid molding process simulation International Sampe Symposium and Exhibition (Proceedings). 54. |
0.366 |
|
| 2009 |
Alms JB, Glancey JL, Advani SG. Sequential injection using a gantry positioning system for flow control in vacuum resin infusion processes International Sampe Symposium and Exhibition (Proceedings). 54. |
0.36 |
|
| 2009 |
Simacek P, Advani SG. Recent advances in resin flow simulations in Liquid Composite Molding processes Iccm International Conferences On Composite Materials. |
0.327 |
|
| 2008 |
Fan Z, Advani SG. Capillary effect of multi-walled carbon nanotubes suspension in composite processing. Journal of Nanoscience and Nanotechnology. 8: 1669-78. PMID 18572564 DOI: 10.1166/Jnn.2008.18230 |
0.641 |
|
| 2008 |
Tang W, Advani SG. Dynamic simulation of carbon nanotubes in simple shear flow Cmes - Computer Modeling in Engineering and Sciences. 25: 149-164. DOI: 10.3970/Cmes.2008.025.149 |
0.597 |
|
| 2008 |
Sharp K, Bogdanovich AE, Tang W, Heider D, Advani S, Glowiana M. High Through-thickness Thermal Conductivity Composites Based on Three-Dimensional Woven Fiber Architectures Aiaa Journal. 46: 2944-2954. DOI: 10.2514/1.38108 |
0.596 |
|
| 2008 |
Simacek P, Advani SG, Iobst SA. Modeling flow in compression resin transfer molding for manufacturing of complex lightweight high-performance automotive parts Journal of Composite Materials. 42: 2523-2545. DOI: 10.1177/0021998308096320 |
0.433 |
|
| 2008 |
Simacek P, Advani SG, Zonvide K, Barrett LW. Modeling of resin flow in reinforced dielectric prepregs Journal of Electronic Packaging, Transactions of the Asme. 130: 0210011-0210018. DOI: 10.1115/1.2837510 |
0.424 |
|
| 2008 |
Zhang FY, Advani SG, Prasad AK. Performance of a metallic gas diffusion layer for PEM fuel cells Journal of Power Sources. 176: 293-298. DOI: 10.1016/J.Jpowsour.2007.10.055 |
0.325 |
|
| 2008 |
Zhou F, Alms J, Advani SG. A closed form solution for flow in dual scale fibrous porous media under constant injection pressure conditions Composites Science and Technology. 68: 699-708. DOI: 10.1016/J.Compscitech.2007.09.010 |
0.693 |
|
| 2008 |
Fan Z, Santare MH, Advani SG. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes Composites Part a: Applied Science and Manufacturing. 39: 540-554. DOI: 10.1016/J.Compositesa.2007.11.013 |
0.652 |
|
| 2008 |
Steggall C, Advani SG, Yarlagadda S. Mechanical properties and energy absorption of powder-impregnated continuous fiber thermoplastic matrix composites International Sampe Symposium and Exhibition (Proceedings). 52. |
0.341 |
|
| 2008 |
Neacsu V, Lawrence JM, Advani SG. Influence of flow on preform saturation and microvoids in liquid composite molding International Sampe Symposium and Exhibition (Proceedings). 52. |
0.786 |
|
| 2008 |
Advani SG, Simacek P. Flow Simulation to Address Microvoids and Material Variability in Liquid Composite Molding Materials Science and Technology Conference and Exhibition, Ms and T'08. 4: 2529-2538. |
0.387 |
|
| 2008 |
Alms JB, Glancey JL, Advani SG. Vacuum Induced Preform Relaxation (VIPR) process for resin flow control in vacuum infusion processes American Society For Composites - 23rd Technical Conference of the American Society For Composites 2008. 2: 1486-1498. |
0.375 |
|
| 2008 |
Steggall C, Simacek P, Yarlagadda S, Advani SG. A model to describe thermoplastic resin impregnation in a unit cell of a fiber tow within a textile preform Proceedings of the 9th International Conference On Textile Composites - Texcomp9: Recent Advances in Textile Composites. 88-96. |
0.355 |
|
| 2008 |
Alms JB, Glancey JL, Advani SG. Experimental determination of permeability of woven fiber glass during the Vacuum Induced Preform Relaxation (vipr) process Proceedings of the 9th International Conference On Textile Composites - Texcomp9: Recent Advances in Textile Composites. 11-18. |
0.383 |
|
| 2007 |
Tang W, Advani SG. Nonequilibrium molecular dynamics simulation to describe the rotation of rigid, low aspect ratio carbon nanotubes in simple shear flow. The Journal of Chemical Physics. 126: 144711. PMID 17444736 DOI: 10.1063/1.2717173 |
0.554 |
|
| 2007 |
Tang W, Advani SG. Non-equilibrium molecular dynamics simulation of water flow around a carbon nanotube Cmes - Computer Modeling in Engineering and Sciences. 22: 31-40. DOI: 10.3970/Cmes.2007.022.031 |
0.55 |
|
| 2007 |
Chohra M, Advani SG, Yarlagadda S. Filtration of particles through a single layer of dual scale fibrous porous media Advanced Composites Letters. 16: 205-222. DOI: 10.1177/096369350701600602 |
0.377 |
|
| 2007 |
Obaid AA, Gokce A, Yarlagadda S, Advani SG. Enhancement of adhesion between copper and vinyl ester in glass fiber-vinyl ester composites Composite Interfaces. 14: 99-116. DOI: 10.1163/156855407779819008 |
0.626 |
|
| 2007 |
Zhang FY, Spernjak D, Prasad AK, Advani SG. In situ characterization of the catalyst layer in a polymer electrolyte membrane fuel cell Journal of the Electrochemical Society. 154: B1152-B1157. DOI: 10.1149/1.2777987 |
0.303 |
|
| 2007 |
Fan Z, Advani SG. Rheology of multiwall carbon nanotube suspensions Journal of Rheology. 51: 585-604. DOI: 10.1122/1.2736424 |
0.593 |
|
| 2007 |
Feser JP, Prasad AK, Advani SG. Particle image velocimetry measurements in a model proton exchange membrane fuel cell Journal of Fuel Cell Science and Technology. 4: 328-335. DOI: 10.1115/1.2744053 |
0.362 |
|
| 2007 |
Zhou F, Advani SG, Wetzel ED. Simulation of slowly dragging a cylinder through a confined pressurized bed of granular materials using the discrete element method Physics of Fluids. 19. DOI: 10.1063/1.2433738 |
0.586 |
|
| 2007 |
Spernjak D, Prasad AK, Advani SG. Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell Journal of Power Sources. 170: 334-344. DOI: 10.1016/J.Jpowsour.2007.04.020 |
0.306 |
|
| 2007 |
Arisetty S, Prasad AK, Advani SG. Metal foams as flow field and gas diffusion layer in direct methanol fuel cells Journal of Power Sources. 165: 49-57. DOI: 10.1016/J.Jpowsour.2006.12.008 |
0.311 |
|
| 2007 |
Simacek P, Advani SG. Modeling resin flow and fiber tow saturation induced by distribution media collapse in VARTM Composites Science and Technology. 67: 2757-2769. DOI: 10.1016/J.Compscitech.2007.02.008 |
0.501 |
|
| 2007 |
Alms J, Advani SG. Simulation and experimental validation of flow flooding chamber method of resin delivery in liquid composite molding Composites Part a: Applied Science and Manufacturing. 38: 2131-2141. DOI: 10.1016/J.Compositesa.2007.06.011 |
0.482 |
|
| 2007 |
Kuentzer N, Simacek P, Advani SG, Walsh S. Correlation of void distribution to VARTM manufacturing techniques Composites Part a: Applied Science and Manufacturing. 38: 802-813. DOI: 10.1016/J.Compositesa.2006.08.005 |
0.488 |
|
| 2007 |
Heider D, Simacek P, Dominauskas A, Deffor H, Advani S, Gillespie JW. Infusion design methodology for thick-section, low-permeability preforms using inter-laminar flow media Composites Part a: Applied Science and Manufacturing. 38: 525-534. DOI: 10.1016/J.Compositesa.2006.02.016 |
0.437 |
|
| 2007 |
Neacsu V, Leisen J, Beckham HW, Advani SG. Use of magnetic resonance imaging to visualize impregnation across aligned cylinders due to capillary forces Experiments in Fluids. 42: 425-440. DOI: 10.1007/S00348-007-0251-0 |
0.749 |
|
| 2007 |
Lawrence JM, Frey P, Obaid AA, Yarlagadda S, Advani SG. Simulation and validation of resin flow during manufacturing of composite panels containing embedded impermeable inserts with the VARTM process Polymer Composites. 28: 442-450. DOI: 10.1002/Pc.20293 |
0.437 |
|
| 2007 |
Alms J, Simacek P, Advani SG. Quantitative approach to determine bleeding time for complete tow saturation International Sampe Symposium and Exhibition (Proceedings). 52. |
0.312 |
|
| 2007 |
Steggall C, Advani SG, Yarlagadda S. Effects of pressure and time on fiber bundle impregnation in powder-impregnated thick section thermoplastic composites International Sampe Symposium and Exhibition (Proceedings). 52. |
0.36 |
|
| 2007 |
Lawrence JM, Neacsu V, Advani SG. Modeling the impact of capillary pressure and air entrapment on fiber tow saturation resin infusion in LCM International Sampe Symposium and Exhibition (Proceedings). 52. |
0.785 |
|
| 2007 |
Lawrence JM, Simacek P, Frey P, Bhat P, Gebauer T, Advani SG. The compaction behavior of fibrous preform materials during the VARTM infusion Aip Conference Proceedings. 907: 1039-1045. |
0.32 |
|
| 2006 |
Tang W, Advani SG. Drag on a nanotube in uniform liquid argon flow. The Journal of Chemical Physics. 125: 174706. PMID 17100460 DOI: 10.1063/1.2363981 |
0.578 |
|
| 2006 |
Lawrence JM, Hughes P, Advani SG. Experimental validation of dependence map based control in liquid composite molding Journal of Composite Materials. 40: 1137-1162. DOI: 10.1177/0021998305057378 |
0.433 |
|
| 2006 |
Advani SG, Fan Z. Dispersion, bonding and orientation of carbon nanotubes in polymer matrices Processing and Properties of Nanocomposites. 61-98. DOI: 10.1142/9789812772473_0002 |
0.546 |
|
| 2006 |
Advani SG. Processing and properties of nanocomposites Processing and Properties of Nanocomposites. 1-452. DOI: 10.1142/6317 |
0.306 |
|
| 2006 |
Feser JP, Prasad AK, Advani SG. Experimental characterization of in-plane permeability of gas diffusion layers Journal of Power Sources. 162: 1226-1231. DOI: 10.1016/J.Jpowsour.2006.07.058 |
0.4 |
|
| 2006 |
Feser JP, Prasad AK, Advani SG. On the relative influence of convection in serpentine flow fields of PEM fuel cells Journal of Power Sources. 161: 404-412. DOI: 10.1016/J.Jpowsour.2006.04.129 |
0.366 |
|
| 2006 |
Neacsu V, Obaid AA, Advani SG. Spontaneous radial capillary impregnation across a bank of aligned micro-cylinders. Part II: Experimental investigations International Journal of Multiphase Flow. 32: 677-691. DOI: 10.1016/J.Ijmultiphaseflow.2006.02.015 |
0.754 |
|
| 2006 |
Neacsu V, Abu Obaid A, Advani SG. Spontaneous radial capillary impregnation across a bank of aligned micro-cylinders - Part I: Theory and model development International Journal of Multiphase Flow. 32: 661-676. DOI: 10.1016/J.Ijmultiphaseflow.2006.02.006 |
0.746 |
|
| 2006 |
Zhou F, Kuentzer N, Simacek P, Advani SG, Walsh S. Analytic characterization of the permeability of dual-scale fibrous porous media Composites Science and Technology. 66: 2795-2803. DOI: 10.1016/J.Compscitech.2006.02.025 |
0.688 |
|
| 2006 |
Lin LY, Lee JH, Hong CE, Yoo GH, Advani SG. Preparation and characterization of layered silicate/glass fiber/epoxy hybrid nanocomposites via vacuum-assisted resin transfer molding (VARTM) Composites Science and Technology. 66: 2116-2125. DOI: 10.1016/J.Compscitech.2005.12.025 |
0.453 |
|
| 2006 |
Šimáček P, Advani SG. Role of acceleration forces in numerical simulation of mold filling processes in fibrous porous media Composites Part a: Applied Science and Manufacturing. 37: 1970-1982. DOI: 10.1016/J.Compositesa.2005.12.016 |
0.324 |
|
| 2006 |
Kuentzer N, Simacek P, Advani SG, Walsh S. Permeability characterization of dual scale fibrous porous media Composites Part a: Applied Science and Manufacturing. 37: 2057-2068. DOI: 10.1016/J.Compositesa.2005.12.005 |
0.477 |
|
| 2006 |
Chohra M, Advani SG, Gokce A, Yarlagadda S. Modeling of filtration through multiple layers of dual scale fibrous porous media Polymer Composites. 27: 570-581. DOI: 10.1002/Pc.20228 |
0.682 |
|
| 2006 |
Lawrence JM, Simacek P, Advani SG. The compression resin transfer molding process for automotive composite components American Society For Composites - 21st Technical Conference of the American Society For Composites 2006. 3: 1657-1676. |
0.414 |
|
| 2006 |
Lawrence JM, Simacek P, Advani SG. New advances in modeling and simulation of liquid composite molding processes International Sampe Symposium and Exhibition (Proceedings). 51. |
0.379 |
|
| 2006 |
Simacek P, Advani SG. Modeling and simulation of resin flow in resin infusion processes such as VARTM, VAP and compression RTM International Sampe Technical Conference. |
0.365 |
|
| 2006 |
Kuentzer N, Simacek P, Advani SG. Modeling and simulation of dual scale flow in woven or stitched preforms in liquid molding processes International Sampe Symposium and Exhibition (Proceedings). 51. |
0.366 |
|
| 2005 |
Zhou F, Advani SG, Wetzel ED. Slow drag in polydisperse granular mixtures under high pressure. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics. 71: 061304. PMID 16089732 DOI: 10.1103/Physreve.71.061304 |
0.586 |
|
| 2005 |
Tang W, Advani SG. Dynamic Simulation of Long Flexible Fibers in Shear Flow Cmes-Computer Modeling in Engineering & Sciences. 8: 165-176. DOI: 10.3970/Cmes.2005.008.165 |
0.614 |
|
| 2005 |
Markicevic B, Litchfield D, Heider D, Advani SG. Role of Flow Enhancement Network during Filling of Fibrous Porous Media Journal of Porous Media. 8: 281-297. DOI: 10.1615/Jpormedia.V8.I3.40 |
0.311 |
|
| 2005 |
Gokce A, Advani SG. Modeling, optimization and control of resin flow during manufacturing of textile composites with liquid molding Design and Manufacture of Textile Composites. 242-291. DOI: 10.1533/9781845690823.242 |
0.64 |
|
| 2005 |
Lawrence J, Advani S. Dependence Map-Based Flow Control to Reduce Void Content in Liquid Composite Molding Materials and Manufacturing Processes. 20: 933-960. DOI: 10.1081/Amp-200060419 |
0.409 |
|
| 2005 |
Fan Z, Advani SG. Characterization of orientation state of carbon nanotubes in shear flow Polymer. 46: 5232-5240. DOI: 10.1016/J.Polymer.2005.04.008 |
0.619 |
|
| 2005 |
Gokce A, Chohra M, Advani SG, Walsh SM. Permeability estimation algorithm to simultaneously characterize the distribution media and the fabric preform in vacuum assisted resin transfer molding process Composites Science and Technology. 65: 2129-2139. DOI: 10.1016/J.Compscitech.2005.05.012 |
0.664 |
|
| 2005 |
Correia NC, Robitaille F, Long AC, Rudd CD, Šimáček P, Advani SG. Analysis of the vacuum infusion moulding process: I. Analytical formulation Composites Part a: Applied Science and Manufacturing. 36: 1645-1656. DOI: 10.1016/J.Compositesa.2005.03.019 |
0.393 |
|
| 2005 |
Lawrence JM, Fried P, Advani SG. Automated manufacturing environment to address bulk permeability variations and race tracking in resin transfer molding by redirecting flow with auxiliary gates Composites Part a: Applied Science and Manufacturing. 36: 1128-1141. DOI: 10.1016/J.Compositesa.2005.01.024 |
0.472 |
|
| 2005 |
Markicevic B, Heider D, Advani S, Walsh S. Stochastic modeling of preform heterogeneity to address dry spots formation in the VARTM Process Composites Part a: Applied Science and Manufacturing. 36: 851-858. DOI: 10.1016/J.Compositesa.2004.09.002 |
0.453 |
|
| 2005 |
Devillard M, Hsiao K, Advani SG. Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding—part II: automation and validation Composites Part a: Applied Science and Manufacturing. 36: 1581-1589. DOI: 10.1016/J.Compositesa.2004.04.009 |
0.435 |
|
| 2005 |
Gokce A, Obaid AA, Yarlagadda S, Advani SG. Manufacturing and structural performance of composites with interlaminar inserts using vacuum assisted resin transfer molding International Sampe Symposium and Exhibition (Proceedings). 50: 665-678. |
0.644 |
|
| 2005 |
Lawrence JM, Simacek P, Gokee A, Advani SG. Use of flow simulation for design, optimization and control of liquid composite molding processes 20th Technical Conference of the American Society For Composites 2005. 3: 1802-1817. |
0.328 |
|
| 2005 |
Fan Z, Alms J, Advani SG. On aligning multi-walled carbon nanotubes to enhance interlaminar strength of fiber reinforced composites 20th Technical Conference of the American Society For Composites 2005. 1: 602-609. |
0.337 |
|
| 2005 |
Neacsu V, Abu-Obaid A, Advani SG. Role of capillarity during fiber tow impregnation in composites processing International Sampe Symposium and Exhibition (Proceedings). 50: 691-705. |
0.777 |
|
| 2004 |
Zhou F, Advani SG, Wetzel ED. Slow drag in granular materials under high pressure. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics. 69: 061306. PMID 15244559 DOI: 10.1103/Physreve.69.061306 |
0.585 |
|
| 2004 |
Lawrence JM, Devillard M, Advani SG. Design and testing of a new injection approach for liquid composite molding Journal of Reinforced Plastics and Composites. 23: 1625-1638. DOI: 10.1177/0731684404039780 |
0.482 |
|
| 2004 |
Correia NC, Robitaille F, Long AC, Rudd CD, Šimáček P, Advani SG. Use of resin transfer molding simulation to predict flow, saturation, and compaction in the VARTM process Journal of Fluids Engineering, Transactions of the Asme. 126: 210-215. DOI: 10.1115/1.1669032 |
0.416 |
|
| 2004 |
Lopatnikov S, Simacek P, GillespieJr J, Advani SG. A closed form solution to describe infusion of resin under vacuum in deformable fibrous porous media Modelling and Simulation in Materials Science and Engineering. 12: S191-S204. DOI: 10.1088/0965-0393/12/3/S09 |
0.42 |
|
| 2004 |
Hsiao K, Devillard M, Advani SG. Simulation based flow distribution network optimization for vacuum assisted resin transfer moulding process Modelling and Simulation in Materials Science and Engineering. 12: S175-S190. DOI: 10.1088/0965-0393/12/3/S08 |
0.375 |
|
| 2004 |
Gokce A, Advani SG. Vent location optimization using map-based exhaustive search in liquid composite molding processes Materials and Manufacturing Processes. 19: 523-548. DOI: 10.1081/Amp-120038659 |
0.648 |
|
| 2004 |
Dimitrovová Z, Advani SG. Mesolevel analysis of the transition region formation and evolution during the liquid composite molding process Computers & Structures. 82: 1333-1347. DOI: 10.1016/J.Compstruc.2004.03.029 |
0.479 |
|
| 2004 |
Lawrence JM, Barr J, Karmakar R, Advani SG. Characterization of preform permeability in the presence of race tracking Composites Part a: Applied Science and Manufacturing. 35: 1393-1405. DOI: 10.1016/J.Compositesa.2004.05.002 |
0.415 |
|
| 2004 |
Gokce A, Advani SG. Simultaneous gate and vent location optimization in liquid composite molding processes Composites Part a: Applied Science and Manufacturing. 35: 1419-1432. DOI: 10.1016/J.Compositesa.2004.05.001 |
0.667 |
|
| 2004 |
Hsiao K, Advani SG. Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding. Part I: design and algorithm development Composites Part a: Applied Science and Manufacturing. 35: 1149-1159. DOI: 10.1016/J.Compositesa.2004.03.010 |
0.443 |
|
| 2004 |
Acheson JA, Simacek P, Advani SG. The implications of fiber compaction and saturation on fully coupled VARTM simulation Composites Part a: Applied Science and Manufacturing. 35: 159-169. DOI: 10.1016/J.Compositesa.2003.02.001 |
0.487 |
|
| 2004 |
Fan Z, Hsiao K, Advani SG. Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous media Carbon. 42: 871-876. DOI: 10.1016/J.Carbon.2004.01.067 |
0.653 |
|
| 2004 |
Devillard M, Laut A, Advani SG. On-line mixing during injection and simultaneous curing in liquid composite molding processes Polymer Composites. 26: 74-83. DOI: 10.1002/Pc.20066 |
0.425 |
|
| 2004 |
?im�?ek P, Advani SG. Desirable features in mold filling simulations for Liquid Composite Molding processes Polymer Composites. 25: 355-367. DOI: 10.1002/Pc.20029 |
0.45 |
|
| 2004 |
Simacek P, Advani SG. Gate elements at injection locations in numerical simulations of flow through porous media: applications to mold filling International Journal For Numerical Methods in Engineering. 61: 1501-1519. DOI: 10.1002/Nme.1116 |
0.385 |
|
| 2004 |
Dimitrovová Z, Advani SG. Free boundary viscous flows at micro and mesolevel during liquid composites moulding process International Journal For Numerical Methods in Fluids. 46: 435-455. DOI: 10.1002/Fld.761 |
0.371 |
|
| 2003 |
Mathur R, Advani SG, Fink BK. A Real-Coded Hybrid Genetic Algorithm to Determine Optimal Resin Injection Locations in the Resin Transfer Molding Process Cmes-Computer Modeling in Engineering & Sciences. 4: 587-602. DOI: 10.3970/Cmes.2003.004.587 |
0.517 |
|
| 2003 |
Binetruy C, Advani SG. Foam Core Deformation During Liquid Molding of Sandwich Structures: Modeling and Experimental Analysis Journal of Sandwich Structures & Materials. 5: 351-375. DOI: 10.1177/109963603027909 |
0.402 |
|
| 2003 |
Lawrence JM, Mahe A, Naveen YRK, Advani SG. Experimental Study to Illustrate Flow Control in Presence of Race Tracking Disturbances in Resin Transfer Moulding Advanced Composites Letters. 12: 096369350301200. DOI: 10.1177/096369350301200302 |
0.341 |
|
| 2003 |
Mathur R, Advani SG, Yarlagadda S, Fink BK. Genetic Algorithm based Resistive Susceptor Design for Uniform Heating During the Induction Bonding Process Journal of Thermoplastic Composite Materials. 16: 529-550. DOI: 10.1177/089270503028192 |
0.513 |
|
| 2003 |
Devillard M, Hsiao KT, Gokce A, Advani SG. On-line characterization of bulk permeability and race-tracking during the filling stage in resin transfer molding process Journal of Composite Materials. 37: 1525-1541. DOI: 10.1177/0021998303034459 |
0.7 |
|
| 2003 |
Devillard M, Hsiao K, Advani SG. Validation and Implementation of Control Strategies for Liquid Composite Molding Processes Materials. 45-48. DOI: 10.1115/Imece2003-43521 |
0.483 |
|
| 2003 |
Santare MH, Novotny JE, Tang W, Advani SG. Mechanical characterization of a nanotube-polyethylene composite material American Society of Mechanical Engineers, Materials Division (Publication) Md. 98: 175-179. DOI: 10.1115/Imece2003-43351 |
0.564 |
|
| 2003 |
Zhou F, Advani SG, Wetzel ED. Characterization of the Viscous Behavior of Compacted Ceramic Particles Under Shear and Pressure Loads Materials. 145-149. DOI: 10.1115/Imece2003-42991 |
0.592 |
|
| 2003 |
Deleglise M, Simacek P, Binetruy C, Advani S. Determination of the Thermal Dispersion Coefficient During Radial Filling of a Porous Medium Journal of Heat Transfer. 125: 875-880. DOI: 10.1115/1.1599366 |
0.409 |
|
| 2003 |
Gokce A, Advani SG. Gate effectiveness in controlling resin advance in liquid composite molding processes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 548-555. DOI: 10.1115/1.1559162 |
0.703 |
|
| 2003 |
Hsiao K, Alms J, Advani SG. Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites Nanotechnology. 14: 791-793. DOI: 10.1088/0957-4484/14/7/316 |
0.319 |
|
| 2003 |
Gokce A, Advani S. Combinatorial search to optimize vent locations in the presence of disturbances in liquid composite molding processes Materials and Manufacturing Processes. 18: 261-285. DOI: 10.1081/Amp-120018909 |
0.664 |
|
| 2003 |
Simacek P, Advani SG. A numerical model to predict fiber tow saturation during liquid composite molding Composites Science and Technology. 63: 1725-1736. DOI: 10.1016/S0266-3538(03)00155-6 |
0.458 |
|
| 2003 |
Tang W, Santare MH, Advani SG. Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite films Carbon. 41: 2779-2785. DOI: 10.1016/S0008-6223(03)00387-7 |
0.562 |
|
| 2003 |
Simacek P, Advani SG. Approximate numerical method for prediction of temperature distribution in flow through narrow gaps containing porous media Computational Mechanics. 32: 1-9. DOI: 10.1007/S00466-003-0446-Z |
0.403 |
|
| 2003 |
Lawrence JM, Advani SG. Use of sensors and actuators to address flow disturbances during the resin transfer molding process Polymer Composites. 24: 237-248. DOI: 10.1002/Pc.10025 |
0.456 |
|
| 2003 |
Modi D, ?im�?ek P, Advani S. Influence of injection gate definition on the flow-front approximation in numerical simulations of mold-filling processes International Journal For Numerical Methods in Fluids. 42: 1237-1248. DOI: 10.1002/Fld.592 |
0.352 |
|
| 2002 |
Dimitrovova Z, Advani SG. Analysis and characterization of relative permeability and capillary pressure for free surface flow of a viscous fluid across an array of aligned cylindrical fibers. Journal of Colloid and Interface Science. 245: 325-37. PMID 16290367 DOI: 10.1006/jcis.2001.8003 |
0.303 |
|
| 2002 |
Hsiao K, Advani SG. A Coupled Approach to Predict Microscopic Temperature Distribution Inside a Unit Cell of Nonisothermal Laminar Flow in Periodic Porous Media Journal of Porous Media. 5: 17. DOI: 10.1615/Jpormedia.V5.I2.10 |
0.319 |
|
| 2002 |
Stadtfeld HC, Erninger M, Bickerton S, Advani SG. An Experimental Method to Continuously Measure Permeability of Fiber Preforms as a Function of Fiber Volume Fraction Journal of Reinforced Plastics and Composites. 21: 879-899. DOI: 10.1177/073168402128987518 |
0.442 |
|
| 2002 |
Estrada G, Vieux-Pernon C, Advani SG. Experimental Characterization of the Influence of Tackifier Material on Preform Permeability Journal of Composite Materials. 36: 2297-2310. DOI: 10.1177/0021998302036019542 |
0.434 |
|
| 2002 |
Nedanov PB, Advani SG. A Method to Determine 3D Permeability of Fibrous Reinforcements Journal of Composite Materials. 36: 241-254. DOI: 10.1177/0021998302036002462 |
0.373 |
|
| 2002 |
Gokce A, Hsiao KT, Advani SG. Branch and bound search to optimize injection gate locations in liquid composite molding processes Composites Part a: Applied Science and Manufacturing. 33: 1263-1272. DOI: 10.1016/S1359-835X(02)00047-7 |
0.667 |
|
| 2002 |
Lawrence JM, Hsiao KT, Don RC, Simacek P, Estrada G, Sozer EM, Stadtfeld HC, Advani SG. An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding Composites - Part a: Applied Science and Manufacturing. 33: 981-990. DOI: 10.1016/S1359-835X(02)00043-X |
0.425 |
|
| 2002 |
Kueh SRM, Parnas RS, Advani SG. A methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding Composites Science and Technology. 62: 311-327. DOI: 10.1016/S0266-3538(01)00217-2 |
0.398 |
|
| 2002 |
Antonucci V, Giordano M, Hsiao K, Advani SG. A methodology to reduce thermal gradients due to the exothermic reactions in composites processing International Journal of Heat and Mass Transfer. 45: 1675-1684. DOI: 10.1016/S0017-9310(01)00266-6 |
0.401 |
|
| 2002 |
Comas-cardona S, Ziaee S, Advani SG. Spatially homogeneous gelation in liquid composite molding Polymer Engineering & Science. 42: 1667-1673. DOI: 10.1002/Pen.11061 |
0.359 |
|
| 2002 |
Nedanov PB, Advani SG. Numerical computation of the fiber preform permeability tensor by the homogenization method Polymer Composites. 23: 758-770. DOI: 10.1002/Pc.10474 |
0.389 |
|
| 2001 |
Roychowdhury S, Gillespie JW, Advani SG. Volatile-Induced Void Formation in Amorphous Thermoplastic Polymeric Materials: I. Modeling and Parametric Studies Journal of Composite Materials. 35: 340-366. DOI: 10.1177/002199801772662208 |
0.34 |
|
| 2001 |
Gokce A, Advani S. Permeability Estimation with the Method of Cells Journal of Composite Materials. 35: 713-728. DOI: 10.1177/002199801772662064 |
0.656 |
|
| 2001 |
Aluru R, Keefe M, Advani S. Simulation of injection molding into rapid-prototyped molds Rapid Prototyping Journal. 7: 42-51. DOI: 10.1108/13552540110365153 |
0.338 |
|
| 2001 |
Bickerton S, Stadtfeld HC, Steiner KV, Advani SG. Design and application of actively controlled injection schemes for resin-transfer molding Composites Science and Technology. 61: 1625-1637. DOI: 10.1016/S0266-3538(01)00064-1 |
0.38 |
|
| 2001 |
Dunkers JP, Lenhart JL, Kueh SR, Van Zanten JH, Advani SG, Parnas RS. Fiber optic flow and cure sensing for liquid composite molding Optics and Lasers in Engineering. 35: 91-104. DOI: 10.1016/S0143-8166(00)00110-X |
0.765 |
|
| 2001 |
Moses KB, Advani SG, Reinhardt A. Investigation of fiber motion near solid boundaries in simple shear flow Rheologica Acta. 40: 296-306. DOI: 10.1007/S003970000135 |
0.434 |
|
| 2001 |
Simacek P, Advani SG. An analytic solution for the temperature distribution in flow through porous media in narrow gaps: i – linear injection Heat and Mass Transfer. 38: 25-33. DOI: 10.1007/S002310000184 |
0.357 |
|
| 2001 |
Hsiao K, Gillespie JW, Advani SG, Fink BK. Role of vacuum pressure and port locations on flow front control for liquid composite molding process Polymer Composites. 22: 660-667. DOI: 10.1002/Pc.10568 |
0.43 |
|
| 2001 |
Slade J, Pillai KM, Advani SG. Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold-filling in resin transfer molding Polymer Composites. 22: 491-505. DOI: 10.1002/Pc.10554 |
0.482 |
|
| 2001 |
Mathuw R, Advani SG, Heider D, Hoffmann C, Gillespie JW, Fink BK. Flow front measurements and model validation in the vacuum assisted resin transfer molding process Polymer Composites. 22: 477-490. DOI: 10.1002/Pc.10553 |
0.442 |
|
| 2000 |
Nedanov P, Advani SG. Mold Filling Simulation of Sandwich Composite Structures Manufactured by Liquid Molding: A Parametric Study Journal of Sandwich Structures & Materials. 2: 117-130. DOI: 10.1177/109963620000200202 |
0.484 |
|
| 2000 |
Laval N, Sozer EM, Advani SG. Characterisation of Permeability around a 90° Corner Advanced Composites Letters. 9: 096369350000900. DOI: 10.1177/096369350000900102 |
0.387 |
|
| 2000 |
Slade J, Sozer EM, Advani SG. Fluid Impregnation of Deformed Preforms Journal of Reinforced Plastics and Composites. 19: 552-568. DOI: 10.1177/073168440001900703 |
0.346 |
|
| 2000 |
Hsiao K, Laudorn H, Advani SG. Experimental Investigation of Heat Dispersion Due to Impregnation of Viscous Fluids in Heated Fibrous Porous During Composites Processing Journal of Heat Transfer. 123: 178-187. DOI: 10.1115/1.1338131 |
0.424 |
|
| 2000 |
Bickerton S, Sozer E, Šimácek P, Advani S. Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part II. Predictions and comparisons with experiments Composites Part a: Applied Science and Manufacturing. 31: 439-458. DOI: 10.1016/S1359-835X(99)00088-3 |
0.389 |
|
| 2000 |
Bickerton S, Sozer E, Graham P, Advani S. Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part I. Experiments Composites Part a: Applied Science and Manufacturing. 31: 423-438. DOI: 10.1016/S1359-835X(99)00087-1 |
0.504 |
|
| 2000 |
Sozer EM, Bickerton S, Advani SG. On-line strategic control of liquid composite mould filling process Composites Part a: Applied Science and Manufacturing. 31: 1383-1394. DOI: 10.1016/S1359-835X(00)00060-9 |
0.396 |
|
| 2000 |
Pillai KM, Advani SG, Benard A, Jacob KI. Numerical simulation of crystallization in high density polyethylene extrudates Polymer Engineering and Science. 40: 2356-2373. DOI: 10.1002/Pen.11368 |
0.304 |
|
| 2000 |
Kueh SRM, Advani SG, Parnas RS. Sensor placement study for online flow monitoring in liquid composite molding Polymer Composites. 21: 436-449. DOI: 10.1002/Pc.10200 |
0.375 |
|
| 2000 |
Bickerton S, Advani SG, Mohan RV, Shires DR. Experimental analysis and numerical modeling of flow channel effects in resin transfer molding Polymer Composites. 21: 134-153. DOI: 10.1002/Pc.10172 |
0.449 |
|
| 1999 |
Ballata WO, Walsh SM, Advani S. Determination of the Transverse Permeability of a Fiber Preform Journal of Reinforced Plastics and Composites. 18: 1450-1464. DOI: 10.1177/073168449901801601 |
0.452 |
|
| 1999 |
Reinhardt A, Advani SG, Santare MH, Miller F. Preliminary Study on Composite Hip Prostheses Made by Resin Transfer Molding Journal of Composite Materials. 33: 852-870. DOI: 10.1177/002199839903300904 |
0.374 |
|
| 1999 |
Shuler SF, Advani SG, Kaliakin VN. Transient Analysis and Measurement of Anisotropic Heat Conduction in Transversely Isotropic Composite Materials Journal of Composite Materials. 33: 594-613. DOI: 10.1177/002199839903300701 |
0.398 |
|
| 1999 |
Hsiao K, Mathur R, Advani SG, Gillespie, JW, Fink BK. A Closed Form Solution for Flow During the Vacuum Assisted Resin Transfer Molding Process Journal of Manufacturing Science and Engineering. 122: 463-475. DOI: 10.1115/1.1285907 |
0.605 |
|
| 1999 |
Hsiao K, Advani SG. A theory to describe heat transfer during laminar incompressible flow of a fluid in periodic porous media Physics of Fluids. 11: 1738-1748. DOI: 10.1063/1.870039 |
0.319 |
|
| 1999 |
Hsiao K, Advani SG. Modified effective thermal conductivity due to heat dispersion in fibrous porous media International Journal of Heat and Mass Transfer. 42: 1237-1254. DOI: 10.1016/S0017-9310(98)00246-4 |
0.306 |
|
| 1999 |
Gillio EF, McKnight GP, Gillespie JW, Advani SG, Bernetich KR, Fink BK. Processing and properties of co-injected resin transfer molded vinyl ester and phenolic composites Polymer Composites. 20: 780-788. DOI: 10.1002/Pc.10401 |
0.408 |
|
| 1999 |
Mathur R, Advani SG, Fink BK. Use of genetic algorithms to optimize gate and vent locations for the resin transfer molding process Polymer Composites. 20: 167-178. DOI: 10.1002/Pc.10344 |
0.553 |
|
| 1998 |
Pillai KM, Advani SG. A Model for Unsaturated Flow in Woven Fiber Preforms during Mold Filling in Resin Transfer Molding Journal of Composite Materials. 32: 1753-1783. DOI: 10.1177/002199839803201902 |
0.47 |
|
| 1998 |
Gillio EF, Advani SG, Gillespie JW, Fink BK. Investigation of the role of transverse flow in co-injection resin transfer molding Polymer Composites. 19: 738-746. DOI: 10.1002/Pc.10148 |
0.454 |
|
| 1998 |
Pillai KM, Advani SG. Numerical simulation of unsaturated flow in woven fiber preforms during the resin transfer molding process Polymer Composites. 19: 71-80. DOI: 10.1002/Pc.10077 |
0.455 |
|
| 1998 |
Benard A, Advani SG. An analytical model for spherulitic growth in fiber-reinforced polymers Journal of Applied Polymer Science. 70: 1677-1687. DOI: 10.1002/(Sici)1097-4628(19981128)70:9<1677::Aid-App5>3.0.Co;2-4 |
0.395 |
|
| 1997 |
Shuler SF, Advani SG. Flow Instabilities during the Squeeze Flow of Multiaxial Laminates Journal of Composite Materials. 31: 2146-2160. DOI: 10.1177/002199839703102102 |
0.452 |
|
| 1997 |
Parseval YD, Pillai KM, Advani SG. A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media Transport in Porous Media. 27: 243-264. DOI: 10.1023/A:1006544107324 |
0.433 |
|
| 1997 |
Bickerton S, Šimáček P, Guglielmi SE, Advani SG. Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part Composites Part a: Applied Science and Manufacturing. 28: 801-816. DOI: 10.1016/S1359-835X(97)00033-X |
0.497 |
|
| 1997 |
Advani SG, creasy TS, Shuler SF. Chapter 8 Rheology of long fiber-reinforced composites in sheetforming Composite Materials Series. 11: 323-369. DOI: 10.1016/S0927-0108(97)80010-0 |
0.317 |
|
| 1997 |
Creasy TS, Advani SG. A model long-discontinuous-fiber filled thermoplastic melt in extensional flow Journal of Non-Newtonian Fluid Mechanics. 73: 261-278. DOI: 10.1016/S0377-0257(97)00045-1 |
0.438 |
|
| 1997 |
Bickerton S, Advani SG. Experimental investigation and flow visualization of the resin-transfer mold-filling process in a non-planar geometry Composites Science and Technology. 57: 23-33. DOI: 10.1016/S0266-3538(96)00100-5 |
0.462 |
|
| 1997 |
Gupte SK, Advani SG. Flow near the permeable boundary of a porous medium: An experimental investigation using LDA Experiments in Fluids. 22: 408-422. DOI: 10.1007/S003480050067 |
0.391 |
|
| 1997 |
Mogavero J, Advani SG. Experimental investigation of flow through multi-layered preforms Polymer Composites. 18: 649-655. DOI: 10.1002/Pc.10316 |
0.353 |
|
| 1997 |
Mogavero J, Sun JQ, Advani SG. A nonlinear control method for resin transfer molding Polymer Composites. 18: 412-417. DOI: 10.1002/Pc.10292 |
0.387 |
|
| 1997 |
Lin H, Advani SG. Processing models and characterization of thermoplastic composite wound parts Polymer Composites. 18: 405-411. DOI: 10.1002/Pc.10291 |
0.458 |
|
| 1997 |
Gupte SK, Advani SG. Flow near the permeable boundary of an aligned fiber preform: An experimental investigation using laser doppler anemometry Polymer Composites. 18: 114-124. DOI: 10.1002/Pc.10266 |
0.463 |
|
| 1996 |
Krach A, Advani SG. Influence of Void Shape, Void Volume and Matrix Anisotropy on Effective Thermal Conductivity of a Three-Phase Composite Journal of Composite Materials. 30: 933-946. DOI: 10.1177/002199839603000805 |
0.423 |
|
| 1996 |
Creasy TS, Advani SG, Okine RK. Transient rheological behavior of a long discontinuous fiber‐melt system Journal of Rheology. 40: 497-519. DOI: 10.1122/1.550787 |
0.308 |
|
| 1996 |
Liu B, Bickerton S, Advani SG. Modelling and simulation of resin transfer moulding (RTM)—gate control, venting and dry spot prediction Composites Part a: Applied Science and Manufacturing. 27: 135-141. DOI: 10.1016/1359-835X(95)00012-Q |
0.32 |
|
| 1996 |
Shuler S, Advani S. Transverse squeeze flow of concentrated aligned fibers in viscous fluids Journal of Non-Newtonian Fluid Mechanics. 65: 47-74. DOI: 10.1016/0377-0257(96)01440-1 |
0.488 |
|
| 1996 |
Calado VM, Advani SG. Effective average permeability of multi-layer preforms in resin transfer molding Composites Science and Technology. 56: 519-531. DOI: 10.1016/0266-3538(96)00037-1 |
0.417 |
|
| 1996 |
Creasv TS, Advani SG, Okine RK. Non-Linear response of a long, discontinuous fiber/melt system in elongational flows Rheologica Acta. 35: 347-355. DOI: 10.1007/Bf00403535 |
0.323 |
|
| 1996 |
Burns SBK, Advani SG. An experimental investigation of initial oscillations in a radial Hele-Shaw cell Experiments in Fluids. 21: 187-200. DOI: 10.1007/Bf00191691 |
0.354 |
|
| 1996 |
Pillai KM, Advani SG. Wicking across a fiber-bank Journal of Colloid and Interface Science. 183: 100-110. DOI: 10.1006/Jcis.1996.0522 |
0.448 |
|
| 1996 |
Bénard A, Advani SG. A cell model to describe the spherulitic growth in semicrystalline polymers Polymer Engineering & Science. 36: 520-534. DOI: 10.1002/Pen.10438 |
0.325 |
|
| 1996 |
?im�?ek P, Advani SG. Permeability model for a woven fabric Polymer Composites. 17: 887-899. DOI: 10.1002/Pc.10682 |
0.496 |
|
| 1996 |
Ranganathan S, Phelan FR, Advani SG. A generalized model for the transverse fluid permeability in unidirectional fibrous media Polymer Composites. 17: 222-230. DOI: 10.1002/Pc.10607 |
0.464 |
|
| 1996 |
MAIER RS, ROHALY TF, ADVANI SG, FICKIE KD. A FAST NUMERICAL METHOD FOR ISOTHERMAL RESIN TRANSFER MOLD FILLING International Journal For Numerical Methods in Engineering. 39: 1405-1417. DOI: 10.1002/(Sici)1097-0207(19960430)39:8<1405::Aid-Nme910>3.0.Co;2-S |
0.323 |
|
| 1995 |
Ranganathan S, Advani SG, Lamontia MA. A Non-Isothermal Process Model for Consolidation and Void Reduction during In-Situ Tow Placement of Thermoplastic Composites Journal of Composite Materials. 29: 1040-1062. DOI: 10.1177/002199839502900803 |
0.462 |
|
| 1995 |
Sadiq TAK, Advani SG, Parnas RS. Experimental investigation of transverse flow through aligned cylinders International Journal of Multiphase Flow. 21: 755-774. DOI: 10.1016/0301-9322(95)00026-T |
0.486 |
|
| 1995 |
Pillai KM, Advani SG. Numerical and analytical study to estimate the effect of two length scales upon the permeability of a fibrous porous medium Transport in Porous Media. 21: 1-17. DOI: 10.1007/Bf00615332 |
0.325 |
|
| 1995 |
Liu B, Advani SG. Operator splitting scheme for 3-D temperature solution based on 2-D flow approximation Computational Mechanics. 16: 74-82. DOI: 10.1007/Bf00365861 |
0.344 |
|
| 1995 |
Arefmanesh A, Advani SG. Nonisothermal bubble growth in polymeric foams Polymer Engineering and Science. 35: 252-260. DOI: 10.1002/Pen.760350306 |
0.32 |
|
| 1995 |
Luce TL, Advani SG, Howard JG, Parnas RS. Permeability characterization. Part 2: Flow behavior in multiple‐layer preforms Polymer Composites. 16: 446-458. DOI: 10.1002/Pc.750160603 |
0.391 |
|
| 1995 |
Parnas RS, Howard JG, Luce TL, Advani SG. Permeability characterization. Part 1: A proposed standard reference fabric for permeability Polymer Composites. 16: 429-445. DOI: 10.1002/Pc.750160602 |
0.399 |
|
| 1994 |
Parnas RS, Salem AJ, Sadiq TAK, Wang HP, Advani SG. The interaction between micro- and macro-scopic flow in RTM preforms Composite Structures. 27: 93-107. DOI: 10.1016/0263-8223(94)90071-X |
0.423 |
|
| 1994 |
Gupte SK, Advani SG. Process modelling for manufacture of orthopedic implants from short fiber composites Polymer Composites. 15: 7-17. DOI: 10.1002/Pc.750150103 |
0.313 |
|
| 1994 |
Bruschke MV, Advani SG. A numerical approach to model non-isothermal viscous flow through fibrous media with free surfaces International Journal For Numerical Methods in Fluids. 19: 575-603. DOI: 10.1002/Fld.1650190704 |
0.336 |
|
| 1994 |
Chan CY, Beris AN, Advani SG. Analysis of periodic 3D viscous flows using a quadratic discrete Galerkin boundary element method International Journal For Numerical Methods in Fluids. 18: 953-981. DOI: 10.1002/Fld.1650181005 |
0.356 |
|
| 1993 |
Bruschke MV, Advani SG. Flow of generalized Newtonian fluids across a periodic array of cylinders Journal of Rheology. 37: 479-498. DOI: 10.1122/1.550455 |
0.338 |
|
| 1993 |
Ranganathan S, Advani SG. A simultaneous solution for flow and fiber orientation in axisymmetric diverging radial flow Journal of Non-Newtonian Fluid Mechanics. 47: 107-136. DOI: 10.1016/0377-0257(93)80047-F |
0.439 |
|
| 1992 |
Åström BT, Pipes RB, Advani SG. On Flow through Aligned Fiber Beds and Its Application to Composites Processing Journal of Composite Materials. 26: 1351-1373. DOI: 10.1177/002199839202600907 |
0.48 |
|
| 1992 |
Erhun M, Advani SG. A BEM approach to model heat flow during crystallization International Journal For Numerical Methods in Engineering. 35: 351-368. DOI: 10.1002/Nme.1620350208 |
0.321 |
|
| 1991 |
Ranganathan S, Advani SG. Fiber-fiber interactions in homogeneous flows of nondilute suspensions Journal of Rheology. 35: 1499-1522. DOI: 10.1122/1.550244 |
0.424 |
|
| 1991 |
Roychowdhury S, Advani SG. An experimental investigation of consolidation in thermoplastic filament winding Composites Manufacturing. 2: 97-104. DOI: 10.1016/0956-7143(91)90186-K |
0.324 |
|
| 1991 |
Van West BP, Pipes RB, Keefe M, Advani SG. The draping and consolidation of commingled fabrics Composites Manufacturing. 2: 10-22. DOI: 10.1016/0956-7143(91)90154-9 |
0.385 |
|
| 1991 |
Van West BP, Pipes RB, Advani SG. The consolidation of commingled thermoplastic fabrics Polymer Composites. 12: 417-427. DOI: 10.1002/Pc.750120607 |
0.489 |
|
| 1990 |
Erhun M, Advani SG. A Predictive Model for Heat Flow During Crystallization of Semi-Crystalline Polymers Journal of Thermoplastic Composite Materials. 3: 90-109. DOI: 10.1177/089270579000300201 |
0.346 |
|
| 1990 |
Advani SG, Tucker CL. Closure approximations for three‐dimensional structure tensors Journal of Rheology. 34: 367-386. DOI: 10.1122/1.550133 |
0.396 |
|
| 1990 |
Ranganathan S, Advani SG. Characterization of orientation clustering in short-fiber composites Journal of Polymer Science Part B: Polymer Physics. 28: 2651-2672. DOI: 10.1002/Polb.1990.090281312 |
0.39 |
|
| 1990 |
Arefmanesh A, Advani SG, Michaelides EE. A numerical study of bubble growth during low pressure structural foam molding process Polymer Engineering and Science. 30: 1330-1337. DOI: 10.1002/Pen.760302011 |
0.343 |
|
| 1990 |
Bruschke MV, Advani SG. A finite element/control volume approach to mold filling in anisotropic porous media Polymer Composites. 11: 398-405. DOI: 10.1002/Pc.750110613 |
0.467 |
|
| 1990 |
Advani SG, Tucker CL. A numerical simulation of short fiber orientation in compression molding Polymer Composites. 11: 164-173. DOI: 10.1002/Pc.750110305 |
0.401 |
|
| 1989 |
Altan MC, Advani SG, Güçeri SI, Pipes RB. On the Description of the Orientation State for Fiber Suspensions in Homogeneous Flows Journal of Rheology. 33: 1129-1155. DOI: 10.1122/1.550047 |
0.301 |
|
| 1987 |
Advani SG, Tucker CL. The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites Journal of Rheology. 31: 751-784. DOI: 10.1122/1.549945 |
0.415 |
|
| 1986 |
Jackson WC, Advani SG, Tucker CL. Predicting the Orientation of Short Fibers in Thin Compression Moldings Journal of Composite Materials. 20: 539-557. DOI: 10.1177/002199838602000603 |
0.432 |
|
| Show low-probability matches. |
