Year |
Citation |
Score |
2017 |
Berg LP, Vance JM. An Industry Case Study: Investigating Early Design Decision Making in Virtual Reality Journal of Computing and Information Science in Engineering. 17: 11001. DOI: 10.1115/1.4034267 |
0.301 |
|
2016 |
Berg LP, Vance JM. Industry use of virtual reality in product design and manufacturing: a survey Virtual Reality. 1-17. DOI: 10.1007/S10055-016-0293-9 |
0.387 |
|
2016 |
Carlson P, Vance JM, Berg M. An evaluation of asymmetric interfaces for bimanual virtual assembly with haptics Virtual Reality. 1-9. DOI: 10.1007/S10055-016-0290-Z |
0.381 |
|
2015 |
Pavlik RA, Vance JM. Interacting with Grasped Objects in Expanded Haptic Workspaces Using the Bubble Technique Journal of Computing and Information Science in Engineering. 15. DOI: 10.1115/1.4031826 |
0.765 |
|
2015 |
Berg LP, Behdad S, Vance JM, Thurston D. Disassembly Sequence Evaluation: A User Study Leveraging Immersive Computing Technologies Journal of Computing and Information Science in Engineering. 15. DOI: 10.1115/1.4028857 |
0.401 |
|
2014 |
Behdad S, Berg LP, Thurston D, Vance J. Leveraging virtual reality experiences with mixed-integer nonlinear programming visualization of disassembly sequence planning under uncertainty Journal of Mechanical Design, Transactions of the Asme. 136. DOI: 10.1115/1.4026463 |
0.368 |
|
2014 |
Behdad S, Berg L, Vance J, Thurston D. Immersive computing technology to investigate tradeoffs under uncertainty in disassembly sequence planning Journal of Mechanical Design, Transactions of the Asme. 136. DOI: 10.1115/1.4025021 |
0.389 |
|
2014 |
Morgan TB, Jarrell D, Vance JM. Poster: Rapid development of natural user interaction using kinect sensors and VRPN Ieee Symposium On 3d User Interfaces 2014, 3dui 2014 - Proceedings. 163-164. DOI: 10.1109/3DUI.2014.6798871 |
0.303 |
|
2013 |
Pavlik RA, Vance JM, Luecke GR. Interacting with a large virtual environment by combining a ground-based haptic device and a mobile robot base Proceedings of the Asme Design Engineering Technical Conference. 2. DOI: 10.1115/DETC2013-13441 |
0.767 |
|
2013 |
Rosenberg M, Vance JM. Virtual hand representations to support natural interaction in immersive environments Proceedings of the Asme Design Engineering Technical Conference. 2. DOI: 10.1115/DETC2013-13166 |
0.354 |
|
2013 |
Behdad S, Thurston D, Berg LP, Vance JM. Synergy between normative and descriptive design theory and methodology Proceedings of the Asme Design Engineering Technical Conference. 5. DOI: 10.1115/Detc2013-13035 |
0.423 |
|
2013 |
Perret J, Kneschke C, Vance J, Dumont G. Interactive assembly simulation with haptic feedback Assembly Automation. 33: 214-220. DOI: 10.1108/Aa-03-2013-017 |
0.436 |
|
2012 |
Berg LP, Behdad S, Vance JM, Thurston D. Disassembly sequence evaluation using graph visualization and immersive computing technologies Proceedings of the Asme Design Engineering Technical Conference. 2: 1351-1359. DOI: 10.1115/Detc2012-70388 |
0.427 |
|
2012 |
Pavlik RA, Vance JM. VR JuggLua: A framework for VR applications combining Lua, OpenSceneGraph, and VR Juggler 2012 5th Workshop On Software Engineering and Architectures For Realtime Interactive Systems, Searis 2012. 29-35. DOI: 10.1109/SEARIS.2012.6231166 |
0.774 |
|
2012 |
Dorozhkin DV, Vance JM, Rehn GD, Lemessi M. Coupling of interactive manufacturing operations simulation and immersive virtual reality Virtual Reality. 16: 15-23. DOI: 10.1007/S10055-010-0165-7 |
0.77 |
|
2011 |
Pavlik RA, Vance JM. Expanding haptic workspace for coupled-object manipulation Asme 2011 World Conference On Innovative Virtual Reality, Winvr 2011. 293-299. DOI: 10.1115/WINVR2011-5585 |
0.726 |
|
2011 |
Vance JM, Dumont G. A conceptual framework to support natural interaction for virtual assembly tasks Asme 2011 World Conference On Innovative Virtual Reality, Winvr 2011. 273-278. DOI: 10.1115/WINVR2011-5570 |
0.31 |
|
2011 |
Faas D, Vance JM. BREP identification during voxel-based collision detection for haptic manual assembly Asme 2011 World Conference On Innovative Virtual Reality, Winvr 2011. 145-153. DOI: 10.1115/WINVR2011-5524 |
0.31 |
|
2011 |
Seth A, Vance JM, Oliver JH. Virtual reality for assembly methods prototyping: A review Virtual Reality. 15: 5-20. DOI: 10.1007/S10055-009-0153-Y |
0.604 |
|
2010 |
Vance JM, Dorozhkin D. Constraint-based synthesis of shape-morphing structures in virtual reality Proceedings of the Asme Design Engineering Technical Conference. 2: 637-644. DOI: 10.1115/DETC2010-29017 |
0.333 |
|
2010 |
Seth U, Su HJ, Vance JM. A virtual reality interface for the design of compliant mechanisms Proceedings of the Asme International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, Detc2009. 5: 1355-1360. DOI: 10.1115/DETC2009-87155 |
0.358 |
|
2010 |
Seth A, Vance JM, Oliver JH. Combining dynamic modeling with geometric constraint management to support low clearance virtual manual assembly Journal of Mechanical Design, Transactions of the Asme. 132: 0810021-0810027. DOI: 10.1115/1.4001565 |
0.606 |
|
2010 |
Pavlik RA, Vance JM. A modular implementation of Wii remote head tracking for virtual reality Asme 2010 World Conference On Innovative Virtual Reality, Winvr 2010. 351-359. |
0.769 |
|
2009 |
Fischer A, Vance JM, Vo DM. Haptic feedback to guide interactive product design Proceedings of the Asme/Afm World Conference On Innovative Virtual Reality 2009, Winvr2009. 101-106. DOI: 10.1115/WINVR2009-741 |
0.409 |
|
2009 |
Su HJ, Dorozhkin DV, Vance JM. A screw theory approach for the type synthesis of compliant mechanisms with flexures Proceedings of the Asme Design Engineering Technical Conference. 7: 151-161. DOI: 10.1115/DETC2009-86684 |
0.778 |
|
2009 |
Su HJ, Dorozhkin DV, Vance JM. A screw theory approach for the conceptual design of flexible joints for compliant mechanisms Journal of Mechanisms and Robotics. 1: 1-8. DOI: 10.1115/1.3211024 |
0.782 |
|
2008 |
Seth A, Su HJ, Vance JM. Development of a dual-Handed haptic assembly system: SHARP Journal of Computing and Information Science in Engineering. 8: 0445021-0445028. DOI: 10.1115/1.3006306 |
0.635 |
|
2007 |
Duncan TJ, Vance JM. Development of a virtual environment for interactive interrogation of computational mixing data Journal of Mechanical Design, Transactions of the Asme. 129: 361-367. DOI: 10.1115/1.2409314 |
0.433 |
|
2007 |
Howard BM, Vance JM. Desktop haptic virtual assembly using physically based modelling Virtual Reality. 11: 207-215. DOI: 10.1007/S10055-007-0069-3 |
0.455 |
|
2006 |
Chipperfield K, Vance JM, Fischer A. Fast meshless reanalysis using combined approximations, preconditioned conjugate gradient, and Taylor series Aiaa Journal. 44: 1325-1331. DOI: 10.2514/1.14170 |
0.743 |
|
2006 |
Seth A, Su HJ, Vance JM. Sharp: A system for haptic assembly & realistic prototyping Proceedings of the Asme Design Engineering Technical Conference. 2006. |
0.362 |
|
2005 |
Seth A, Su HJ, Vance JM. A desktop networked haptic VR interface for mechanical assembly American Society of Mechanical Engineers, Computers and Information in Engineering Division, Ced. 10: 173-180. DOI: 10.1115/IMECE2005-81873 |
0.33 |
|
2004 |
Kim CE, Vance JM. Collision detection and part interaction modeling to facilitate immersive virtual assembly methods Journal of Computing and Information Science in Engineering. 4: 83-90. DOI: 10.1115/1.1738125 |
0.411 |
|
2003 |
Kelsick J, Vance JM, Buhr L, Moller C. Discrete event simulation implemented in a virtual environment Journal of Mechanical Design, Transactions of the Asme. 125: 428-433. DOI: 10.1115/1.1587745 |
0.433 |
|
2003 |
Cerney MM, Adams DC, Vance JM. Image warping of three-dimensional body scan data Sae Technical Papers. |
0.751 |
|
2002 |
Larochelle PM, Vance JM, Kihonge JN. Interactive Visualization of Line Congruences for Spatial Mechanism Design Journal of Computing and Information Science in Engineering. 2: 208-215. DOI: 10.1115/1.1529211 |
0.379 |
|
2002 |
Kihonge JN, Vance JM, Larochelle PM. Spatial mechanism design in virtual reality with networking Journal of Mechanical Design, Transactions of the Asme. 124: 435-440. DOI: 10.1115/1.1481363 |
0.423 |
|
2002 |
Perles BP, Vance JM. Interactive virtual tools for manipulating NURBS surfaces in a virtual environment Journal of Mechanical Design, Transactions of the Asme. 124: 158-163. DOI: 10.1115/1.1464132 |
0.363 |
|
2002 |
Chipperfield KA, Vance JM. Stiffness testing of hydraulic hoses Proceedings of the Asme Design Engineering Technical Conference. 2: 283-287. |
0.742 |
|
2002 |
Dorozhkin DV, Vance JM. Implementing speech recognition in virtual reality Proceedings of the Asme Design Engineering Technical Conference. 1: 61-65. |
0.801 |
|
2002 |
Fischer AG, Chipperfield K, Vance JM. Vrhose: Hydraulic hose routing in virtual reality with jacktm 9th Aiaa/Issmo Symposium On Multidisciplinary Analysis and Optimization. |
0.381 |
|
2002 |
Chipperfield KA, Vance JM. Modeling of hydraulic hose paths Proceedings of the Asme Design Engineering Technical Conference. 2: 1099-1103. |
0.763 |
|
2002 |
Cerney MM, Duncan JR, Vance JM. Using population data and immersive virtual reality for ergonomic design of operator workstations Vdi Berichte. 107-120+517. |
0.792 |
|
2001 |
Volkov SA, Vance JM. Effectiveness of haptic sensation for the evaluation of virtual prototypes Proceedings of the Asme Design Engineering Technical Conference. 2: 1151-1160. DOI: 10.1115/1.1384566 |
0.474 |
|
2001 |
Jayaram S, Vance J, Gadh R, Jayaram U, Srinivasan H. Assessment of VR technology and its applications to engineering problems Journal of Computing and Information Science in Engineering. 1: 72-83. DOI: 10.1115/1.1353846 |
0.397 |
|
2001 |
Kraal JC, Vance JM. VEMECS: A virtual reality interface for spherical mechanism design Journal of Engineering Design. 12: 245-254. DOI: 10.1080/09544820110055574 |
0.472 |
|
1999 |
Furlong TJ, Vance JM, Larochelle PM. Spherical mechanism synthesis in virtual reality Journal of Mechanical Design, Transactions of the Asme. 121: 515-520. DOI: 10.1115/1.2829491 |
0.463 |
|
1999 |
Evans PT, Vance JM, Dark VJ. Assessing the effectiveness of traditional and virtual reality interfaces in spherical mechanism design Journal of Mechanical Design, Transactions of the Asme. 121: 507-514. DOI: 10.1115/1.2829490 |
0.429 |
|
1999 |
Ryken MJ, Vance JM. Applying virtual reality techniques to the interactive stress analysis of a tractor lift arm Finite Elements in Analysis and Design. 35: 141-155. DOI: 10.1016/S0168-874X(99)00062-1 |
0.393 |
|
1999 |
Chipperfield KA, Vance JM. VRHose - virtual hydraulic hose routing design American Society of Mechanical Engineers, Material Handling Division, Mhd. 5: 67-72. |
0.776 |
|
1998 |
Yeh TP, Vance JM. Applying virtual reality techniques to sensitivity-based structural shape design Journal of Mechanical Design, Transactions of the Asme. 120: 612-619. DOI: 10.1115/1.2829323 |
0.464 |
|
1997 |
Yeh TP, Vance JM. Combining MSC/NASTRAN, sensitivity methods, and virtual reality to facilitate interactive design Finite Elements in Analysis and Design. 26: 161-169. DOI: 10.1016/S0168-874X(96)00078-9 |
0.431 |
|
1996 |
Vance JM, Bernard JE. Using padé approximants and curve-fitting to approximate eigenvalues and eigenvectors for large design changes Journal of Mechanical Design, Transactions of the Asme. 118: 151-153. DOI: 10.1115/1.2826847 |
0.393 |
|
1995 |
Osborn SW, Vance JM. Virtual reality environment for synthesizing spherical four-bar mechanisms American Society of Mechanical Engineers, Design Engineering Division (Publication) De. 83: 885-892. |
0.383 |
|
1993 |
Vance JM, Bernard JE. Approximating eigenvectors and eigenvalues across a wide range of design Finite Elements in Analysis and Design. 14: 403-414. DOI: 10.1016/0168-874X(93)90037-Q |
0.381 |
|
Show low-probability matches. |