| Year |
Citation |
Score |
| 2020 |
Ariyo DO, Bello-Ochende T. Constructal design of subcooled microchannel heat exchangers International Journal of Heat and Mass Transfer. 146: 118835. DOI: 10.1016/J.Ijheatmasstransfer.2019.118835 |
0.549 |
|
| 2018 |
Petinrin MO, Bello-Ochende T, Dare AA, Oyewola MO. Entropy generation minimisation of shell-and-tube heat exchanger in crude oil preheat train using firefly algorithm Applied Thermal Engineering. 145: 264-276. DOI: 10.1016/J.Applthermaleng.2018.09.045 |
0.46 |
|
| 2017 |
Wills JA, Bello-Ochende T. Exergy Analysis and Optimization of an Alpha Type Stirling Engine Using the Implicit Filtering Algorithm Frontiers in Mechanical Engineering. 3. DOI: 10.3389/Fmech.2017.00021 |
0.416 |
|
| 2017 |
Nkhonjera L, Bello-Ochende T, John G, King’ondu CK. A review of thermal energy storage designs, heat storage materials and cooking performance of solar cookers with heat storage Renewable and Sustainable Energy Reviews. 75: 157-167. DOI: 10.1016/J.Rser.2016.10.059 |
0.442 |
|
| 2017 |
Meas M, Bello-Ochende T. Thermodynamic design optimisation of an open air recuperative twin-shaft solar thermal Brayton cycle with combined or exclusive reheating and intercooling Energy Conversion and Management. 148: 770-784. DOI: 10.1016/J.Enconman.2017.06.043 |
0.501 |
|
| 2016 |
Adewumi OO, Bello-Ochende T, Meyer JP. Constructal design of single microchannel heat sink with varying axial length and temperature-dependent fluid properties International Journal of Heat and Technology. 34: S167-S172. DOI: 10.18280/Ijht.34S122 |
0.45 |
|
| 2016 |
Bello-Ochende T, Adewumi OO, Meyer JP. Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts International Journal of Fluid Mechanics Research. 43: 441-455. DOI: 10.1615/Interjfluidmechres.V43.I5-6.60 |
0.425 |
|
| 2016 |
Ngo LC, Bello-Ochende T, Meyer J. Numerical investigation of natural convection of cavity receiver for low power application International Journal of Green Energy. 13: 845-851. DOI: 10.1080/15435075.2016.1161628 |
0.462 |
|
| 2016 |
Adewumi OO, Bello-Ochende T, Meyer JP. Numerical Investigation into the Thermal Performance of Single Microchannels with Varying Axial Length and Different Shapes of Micro Pin-Fin Inserts Heat Transfer Engineering. 38: 1157-1170. DOI: 10.1080/01457632.2016.1239927 |
0.427 |
|
| 2016 |
Mwesigye A, Huan Z, Bello-Ochende T, Meyer JP. Influence of optical errors on the thermal and thermodynamic performance of a solar parabolic trough receiver Solar Energy. 135: 703-718. DOI: 10.1016/J.Solener.2016.06.045 |
0.343 |
|
| 2016 |
Mwesigye A, Bello-Ochende T, Meyer JP. Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts International Journal of Thermal Sciences. 99: 238-257. DOI: 10.1016/J.Ijthermalsci.2015.08.015 |
0.546 |
|
| 2016 |
NKhonjera L, Kuboth M, König-Haagen A, John G, King’ondu C, Brüggemann D, Bello-Ochende T. Experimental Investigation of a Finned Pentaerythritol-based Heat Storage Unit for Solar Cooking at 150-200 ̊C Energy Procedia. 93: 160-167. DOI: 10.1016/J.Egypro.2016.07.165 |
0.419 |
|
| 2015 |
Bello-Ochende T. Multi-scale pin fins: Scale analysis and mathematical optimization of micro-pin fins arranged in rows Open Engineering. 5: 238-247. DOI: 10.1515/eng-2015-0023 |
0.473 |
|
| 2015 |
Ngo LC, Bello-Ochende T, Meyer JP. Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins Renewable Energy. 74: 95-105. DOI: 10.1016/J.Renene.2014.07.047 |
0.526 |
|
| 2015 |
Jansen E, Bello-Ochende T, Meyer JP. Integrated solar thermal Brayton cycles with either one or two regenerative heat exchangers for maximum power output Energy. 86: 737-748. DOI: 10.1016/J.Energy.2015.04.080 |
0.493 |
|
| 2015 |
Ngo LC, Bello-Ochende T, Meyer JP. Three-dimensional analysis and numerical optimization of combined natural convection and radiation heat loss in solar cavity receiver with plate fins insert Energy Conversion and Management. 101: 757-766. DOI: 10.1016/J.Enconman.2015.05.061 |
0.48 |
|
| 2015 |
Mwesigye A, Bello-Ochende T, Meyer JP. Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts Applied Thermal Engineering. 77: 42-56. DOI: 10.1016/J.Applthermaleng.2014.12.018 |
0.395 |
|
| 2015 |
Nolte HC, Bello-Ochende T, Meyer JP. Second law analysis and optimization of a parabolic trough receiver tube for direct steam generation Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 51: 875-887. DOI: 10.1007/S00231-014-1465-3 |
0.487 |
|
| 2015 |
Yekoladio PJ, Bello-Ochende T, Meyer JP. Thermodynamic analysis and performance optimization of organic rankine cycles for the conversion of low-to-moderate grade geothermal heat International Journal of Energy Research. 39: 1256-1271. DOI: 10.1002/Er.3326 |
0.447 |
|
| 2014 |
Mwesigye A, Bello-Ochende T, Meyer JP. Thermal performance of a parabolic trough receiver with perforated conical inserts for heat transfer enhancement Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 6. DOI: 10.1115/IMECE201439849 |
0.426 |
|
| 2014 |
Mwesigye A, Bello-Ochende T, Meyer JP. Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios Energy. 73: 606-617. DOI: 10.1016/J.Energy.2014.06.063 |
0.473 |
|
| 2014 |
Baloyi J, Bello-Ochende T, Meyer JP. Thermodynamic optimisation and computational analysis of irreversibilities in a small-scale wood-fired circulating fluidised bedadiabatic combustor Energy. 70: 653-663. DOI: 10.1016/J.Energy.2014.04.052 |
0.323 |
|
| 2014 |
Le Roux WG, Bello-Ochende T, Meyer JP. The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle Energy Conversion and Management. 84: 457-470. DOI: 10.1016/J.Enconman.2014.04.048 |
0.413 |
|
| 2014 |
Mwesigye A, Bello-Ochende T, Meyer JP. Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts Applied Energy. 136: 989-1003. DOI: 10.1016/J.Apenergy.2014.03.037 |
0.46 |
|
| 2014 |
Stocks MD, Bello-Ochende T, Meyer JP. Maximum thermal conductance for a micro-channel, utilising Newtonian and non-Newtonian fluid Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 50: 865-875. DOI: 10.1007/S00231-014-1298-0 |
0.433 |
|
| 2014 |
Adewumi OO, Bello-Ochende T, Meyer JP. Geometric optimisation of multi-layered microchannel heat sink with different flow arrangements Proceedings of the 15th International Heat Transfer Conference, Ihtc 2014. |
0.42 |
|
| 2013 |
Bello-Ochende T. Maximum flow access in heat exchangers, heat generating bodies and inanimate flow systems: constructal law and the emergence of shapes and structures in thermo-fluid mechanics: comment on "The emergence of design in pedestrian dynamics: locomotion, self-organization, walking paths and constructal law" by Antonio F. Miguel. Physics of Life Reviews. 10: 191-2. PMID 23746752 DOI: 10.1016/J.Plrev.2013.03.012 |
0.512 |
|
| 2013 |
Olakoyejo OT, Bello-Ochende T, Meyer JP. Optimisation of conjugate elliptical cooling channels with internal heat generation Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 8. DOI: 10.1115/IMECE2013-66155 |
0.386 |
|
| 2013 |
Mwesigye A, Bello-Ochende T, Meyer JP. Heat transfer enhancement in a parabolic trough receiver using wall detached twisted tape inserts Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 6. DOI: 10.1115/IMECE2013-62745 |
0.427 |
|
| 2013 |
Le Roux WG, Bello-Ochende T, Meyer JP. A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle Renewable and Sustainable Energy Reviews. 28: 677-690. DOI: 10.1016/J.Rser.2013.08.053 |
0.384 |
|
| 2013 |
Yekoladio PJ, Bello-Ochende T, Meyer JP. Design and optimization of a downhole coaxial heat exchanger for an enhanced geothermal system (EGS) Renewable Energy. 55: 128-137. DOI: 10.1016/J.Renene.2012.11.035 |
0.572 |
|
| 2013 |
Adewumi OO, Bello-Ochende T, Meyer JP. Constructal design of combined microchannel and micro pin fins for electronic cooling International Journal of Heat and Mass Transfer. 66: 315-323. DOI: 10.1016/J.Ijheatmasstransfer.2013.07.039 |
0.53 |
|
| 2013 |
Page LG, Bello-Ochende T, Meyer JP. Constructal multi scale cylinders with rotation cooled by natural convection International Journal of Heat and Mass Transfer. 57: 345-355. DOI: 10.1016/J.Ijheatmasstransfer.2012.10.048 |
0.561 |
|
| 2013 |
Bello-Ochende T, Olakoyejo OT, Meyer JP, Bejan A, Lorente S. Constructal flow orientation in conjugate cooling channels with internal heat generation International Journal of Heat and Mass Transfer. 57: 241-249. DOI: 10.1016/J.Ijheatmasstransfer.2012.10.021 |
0.599 |
|
| 2013 |
Mwesigye A, Bello-Ochende T, Meyer JP. Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios Energy. 53: 114-127. DOI: 10.1016/J.Energy.2013.03.006 |
0.484 |
|
| 2013 |
Obayopo SO, Bello-Ochende T, Meyer JP. Three-dimensional optimisation of a fuel gas channel of a proton exchange membrane fuel cell for maximum current density International Journal of Energy Research. 37: 228-241. DOI: 10.1002/Er.1935 |
0.358 |
|
| 2012 |
Lorente S, Cetkin E, Bello-Ochende T, Meyer JP, Bejan A. The constructal-law physics of why swimmers must spread their fingers and toes. Journal of Theoretical Biology. 308: 141-6. PMID 22687444 DOI: 10.1016/J.Jtbi.2012.05.033 |
0.692 |
|
| 2012 |
Obayopo SO, Bello-Ochende T, Meyer JP. Modelling and optimization of reactant gas transport in a PEM fuel cell with a transverse pin fin insert in channel flow International Journal of Hydrogen Energy. 37: 10286-10298. DOI: 10.1016/J.Ijhydene.2012.03.150 |
0.412 |
|
| 2012 |
Olakoyejo OT, Bello-Ochende T, Meyer JP. Constructal conjugate cooling channels with internal heat generation International Journal of Heat and Mass Transfer. 55: 4385-4396. DOI: 10.1016/J.Ijheatmasstransfer.2012.04.007 |
0.454 |
|
| 2012 |
Olakoyejo OT, Bello-Ochende T, Meyer JP. Mathematical optimisation of laminar forced convection heat transfer through a vascularised solid with square channels International Journal of Heat and Mass Transfer. 55: 2402-2411. DOI: 10.1016/J.Ijheatmasstransfer.2011.12.036 |
0.536 |
|
| 2012 |
Meyer JP, Olakoyejo OT, Bello-Ochende T. Constructal optimisation of conjugate triangular cooling channels with internal heat generation International Communications in Heat and Mass Transfer. 39: 1093-1100. DOI: 10.1016/J.Icheatmasstransfer.2012.07.008 |
0.479 |
|
| 2012 |
Baloyi J, Bello-Ochende T, Meyer JP. Minimization of thermal resistance in an air cooled porous matrix made up of solid spheres with heat generation International Communications in Heat and Mass Transfer. 39: 966-970. DOI: 10.1016/J.Icheatmasstransfer.2012.05.013 |
0.446 |
|
| 2012 |
Le Roux WG, Bello-Ochende T, Meyer JP. Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints Energy. 46: 42-50. DOI: 10.1016/J.Energy.2012.03.034 |
0.395 |
|
| 2012 |
le Roux WG, Bello-Ochende T, Meyer JP. Thermodynamic optimisation of the integrated design of a small-scale solar thermal Brayton cycle International Journal of Energy Research. 36: 1088-1104. DOI: 10.1002/Er.1859 |
0.484 |
|
| 2011 |
Bello-Ochende T, Meyer JP, Ogunronbi OI. Constructal multiscale cylinders rotating in cross-flow International Journal of Heat and Mass Transfer. 54: 2568-2577. DOI: 10.1016/J.Ijheatmasstransfer.2011.02.004 |
0.495 |
|
| 2011 |
Page LG, Bello-Ochende T, Meyer JP. Maximum heat transfer density rate enhancement from cylinders rotating in natural convection International Communications in Heat and Mass Transfer. 38: 1354-1359. DOI: 10.1016/J.Icheatmasstransfer.2011.08.010 |
0.551 |
|
| 2011 |
Le Roux WG, Bello-Ochende T, Meyer JP. Operating conditions of an open and direct solar thermal Brayton cycle with optimised cavity receiver and recuperator Energy. 36: 6027-6036. DOI: 10.1016/J.Energy.2011.08.012 |
0.413 |
|
| 2011 |
Bello-Ochende T, Meyer JP, Ogunronbi OI. Heat transfer augmentation and suppression in optimal rotating cylinders in cross-flow Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.469 |
|
| 2011 |
Ighalo FU, Bello-Ochende T, Meyer JP. Geometric optimization of multiple-arrays of micropin-fins Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.478 |
|
| 2011 |
Matyja JM, Bello-Ochende T. Testing of rectangular channels with perturbed entrances for temperature difference under constant heat flux Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.421 |
|
| 2010 |
Bello-Ochende T, Meyer JP, Bejan A. Maximum heat transfer from multi-scale fins arranged in a row with non-uniform geometry 2010 14th International Heat Transfer Conference, Ihtc 14. 3: 557-563. DOI: 10.1115/IHTC14-22808 |
0.51 |
|
| 2010 |
Obayopo SO, Bello-Ochende T, Meyer JP. Thermodynamic optimization of PEM fuel cell stack gas channel for optimal thermal performance 2010 14th International Heat Transfer Conference, Ihtc 14. 5: 29-35. DOI: 10.1115/IHTC14-22233 |
0.318 |
|
| 2010 |
Olakoyejo OT, Bello-Ochende T, Meyer JP. Geometric optimisation of forced convection in cooling channels with internal heat generation 2010 14th International Heat Transfer Conference, Ihtc 14. 2: 361-368. DOI: 10.1115/IHTC14-22230 |
0.327 |
|
| 2010 |
Bello-Ochende T, Meyer JP, Ighalo FU. Combined numerical optimization and constructal theory for the design of microchannel heat sinks Numerical Heat Transfer; Part a: Applications. 58: 882-899. DOI: 10.1080/10407782.2010.529036 |
0.47 |
|
| 2010 |
Bello-Ochende T, Meyer JP, Bejan A. Constructal multi-scale pin-fins International Journal of Heat and Mass Transfer. 53: 2773-2779. DOI: 10.1016/J.Ijheatmasstransfer.2010.02.021 |
0.654 |
|
| 2010 |
Bello-Ochende T, Meyer JP, Dirker J. Three-dimensional multi-scale plate assembly for maximum heat transfer rate density International Journal of Heat and Mass Transfer. 53: 586-593. DOI: 10.1016/J.Ijheatmasstransfer.2009.10.041 |
0.566 |
|
| 2009 |
Ighalo FU, Bello-Ochende T, Meyer JP. Mathematical optimization: Application to the design of optimal micro-channel heat sinks Proceedings - 2009 3rd Southern Conference On Computational Modeling, McSul 2009. 1-6. DOI: 10.1109/MCSUL.2009.8 |
0.41 |
|
| 2009 |
Bello-Ochende T, Meyer JP, Bejan A. Constructal ducts with wrinkled entrances International Journal of Heat and Mass Transfer. 52: 3628-3633. DOI: 10.1016/J.Ijheatmasstransfer.2009.03.014 |
0.638 |
|
| 2009 |
Bello-Ochende T, Meyer JP. Constructal cooling channels: Application to heat transfer in micro-channel heat sinks International Journal of Emerging Multidisciplinary Fluid Sciences. 1: 61-83. |
0.382 |
|
| 2008 |
Lage JL, Anderson R, Costa V, Errera MR, Fowler AJ, Gosselin L, Kimura S, Ledezma GA, Lim JS, Lorente S, Miguel A, Minkowycz W, Morega AM, Bello-Ochende T, Ordóñez JC, et al. Professor Adrian Bejan on his 60th birthday International Journal of Heat and Mass Transfer. 51: 5759-5761. DOI: 10.1016/J.Ijheatmasstransfer.2008.06.027 |
0.613 |
|
| 2008 |
Joucaviel M, Gosselin L, Bello-Ochende T. Maximum heat transfer density with rotating cylinders aligned in cross-flow International Communications in Heat and Mass Transfer. 35: 557-564. DOI: 10.1016/J.Icheatmasstransfer.2007.12.005 |
0.673 |
|
| 2007 |
Bello-Ochende T, Liebenberg L, Malan AG, Bejan A, Meyer JP. Constructal conjugate heat transfer in three-dimensional cooling channels Journal of Enhanced Heat Transfer. 14: 279-293. DOI: 10.1615/Jenhheattransf.V14.I4.20 |
0.614 |
|
| 2007 |
Bello-Ochende T, Meyer JP. Combined micro-channel heat sink optimization for cooled electronics 2007 Proceedings of the Asme/Jsme Thermal Engineering Summer Heat Transfer Conference - Ht 2007. 2: 661-669. DOI: 10.1115/HT2007-32049 |
0.425 |
|
| 2007 |
Bello-Ochende T, Liebenberg L, Meyer JP. Constructal cooling channels for micro-channel heat sinks International Journal of Heat and Mass Transfer. 50: 4141-4150. DOI: 10.1016/J.Ijheatmasstransfer.2007.02.019 |
0.488 |
|
| 2007 |
Bello-Ochende T, Liebenberg L, Meyer JP. Constructal design: Geometric optimization of micro-channel heat sinks South African Journal of Science. 103: 483-489. |
0.467 |
|
| 2005 |
Bello-Ochende T, Bejan A. Constructal multi-scale cylinders with natural convection International Journal of Heat and Mass Transfer. 48: 4300-4306. DOI: 10.1016/J.Ijheatmasstransfer.2005.05.023 |
0.652 |
|
| 2005 |
Bello-Ochende T, Bejan A. Constructal multi-scale cylinders in cross-flow International Journal of Heat and Mass Transfer. 48: 1373-1383. DOI: 10.1016/J.Ijheatmasstransfer.2004.10.013 |
0.652 |
|
| 2004 |
Bello-Ochende T, Bejan A. Optimal spacings for mixed convection Journal of Heat Transfer. 126: 956-962. DOI: 10.1115/1.1833363 |
0.621 |
|
| 2004 |
Bello-Ochende T, Bejan A. Maximal heat transfer density: Plates with multiple lengths in forced convection International Journal of Thermal Sciences. 43: 1181-1186. DOI: 10.1016/J.Ijthermalsci.2004.05.002 |
0.648 |
|
| 2003 |
Bello-Ochende T, Bejan A. Fitting the duct to the "body" of the convective flow International Journal of Heat and Mass Transfer. 46: 1693-1701. DOI: 10.1016/S0017-9310(02)00477-5 |
0.657 |
|
| 2000 |
Bello-Ochende T, Bello-Ochende FL. Steady state laminar mixed convection in horizontal ducts heated along the left lower semi-perimeter Heat and Technology. 18: 53-60. |
0.374 |
|
| Show low-probability matches. |