| Year |
Citation |
Score |
| 2023 |
Rahman MA, Hall E, Gibbon L, Islam MZ, Ulven CA, La Scala JJ. A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement. Polymers. 15. PMID 36987165 DOI: 10.3390/polym15061384 |
0.433 |
|
| 2020 |
Ghasemi S, Sibi MP, Ulven CA, Webster DC, Pourhashem G. A Preliminary Environmental Assessment of Epoxidized Sucrose Soyate (ESS)-Based Biocomposite. Molecules (Basel, Switzerland). 25. PMID 32560446 DOI: 10.3390/Molecules25122797 |
0.48 |
|
| 2020 |
Islam MZ, Ulven CA. A thermographic and energy based approach to define high cycle fatigue strength of flax fiber reinforced thermoset composites Composites Science and Technology. 196: 108233. DOI: 10.1016/J.Compscitech.2020.108233 |
0.477 |
|
| 2019 |
Radkar SS, Amiri A, Ulven CA. Tensile Behavior and Diffusion of Moisture through Flax Fibers by Desorption Method Sustainability. 11: 3558. DOI: 10.3390/Su11133558 |
0.521 |
|
| 2019 |
Shah N, Fehrenbach J, Ulven CA. Hybridization of Hemp Fiber and Recycled-Carbon Fiber in Polypropylene Composites Sustainability. 11: 3163. DOI: 10.3390/Su11113163 |
0.55 |
|
| 2019 |
Parvej MS, Wang X, Fehrenbach J, Ulven CA. Atomic force microscopy-based nanomechanical characterization of kenaf fiber Journal of Composite Materials. 54: 2065-2071. DOI: 10.1177/0021998319892073 |
0.518 |
|
| 2018 |
Ahmed S, Ulven CA. Dynamic In-Situ Observation on the Failure Mechanism of Flax Fiber through Scanning Electron Microscopy Fibers. 6: 17. DOI: 10.3390/Fib6010017 |
0.481 |
|
| 2018 |
Alcock M, Ahmed S, DuCharme S, Ulven C. Influence of Stem Diameter on Fiber Diameter and the Mechanical Properties of Technical Flax Fibers from Linseed Flax Fibers. 6: 10. DOI: 10.3390/Fib6010010 |
0.534 |
|
| 2018 |
Ahmed S, Wang X, Li K, Ulven CA. Investigation on the surface free energy of a single flax fiber through adhesion measurement by atomic force microscopy Journal of Composite Materials. 52: 3233-3239. DOI: 10.1177/0021998318763994 |
0.491 |
|
| 2017 |
Rahman A, Ulven CA, Johnson MA, Durant C, Hossain KG. Pretreatment of Wheat Bran for Suitable Reinforcement in Biocomposites. Journal of Renewable Materials. 5: 62-73. PMID 29417961 DOI: 10.7569/Jrm.2017.634133 |
0.461 |
|
| 2017 |
Huo S, Ulven CA. Study on Residual Stresses in Unidirectional Flax Fiber/Vinyl Ester Composites by XRD Technique Journal of Renewable Materials. 5: 106-116. DOI: 10.7569/Jrm.2017.634136 |
0.661 |
|
| 2017 |
Amiri A, Krosbakken T, Schoen W, Theisen D, Ulven CA. Design and manufacturing of a hybrid flax/carbon fiber composite bicycle frame Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology. 232: 28-38. DOI: 10.1177/1754337117716237 |
0.399 |
|
| 2017 |
Amiri A, Cavalli MN, Ulven CA. A new approach of stiffness degradation modeling for carbon fiber-reinforced polymers under cyclic fully reversed bending Journal of Composite Materials. 51: 2889-2897. DOI: 10.1177/0021998317690239 |
0.505 |
|
| 2017 |
Taylor C, Amiri A, Paramarta A, Ulven C, Webster D. Development and weatherability of bio-based composites of structural quality using flax fiber and epoxidized sucrose soyate Materials and Design. 113: 17-26. DOI: 10.1016/J.Matdes.2016.10.002 |
0.6 |
|
| 2017 |
Amiri A, Triplett Z, Moreira A, Brezinka N, Alcock M, Ulven CA. Standard density measurement method development for flax fiber Industrial Crops and Products. 96: 196-202. DOI: 10.1016/J.Indcrop.2016.11.060 |
0.423 |
|
| 2016 |
Amiri A, Yu A, Webster D, Ulven C. Bio-Based Resin Reinforced with Flax Fiber as Thermorheologically Complex Materials. Polymers. 8. PMID 30979245 DOI: 10.3390/polym8040153 |
0.395 |
|
| 2016 |
Pandey P, Bajwa D, Ulven C, Bajwa S. Influence of Hybridizing Flax and Hemp-Agave Fibers with Glass Fiber as Reinforcement in a Polyurethane Composite. Materials (Basel, Switzerland). 9. PMID 28773512 DOI: 10.3390/Ma9050390 |
0.577 |
|
| 2016 |
Amiri A, Yu A, Webster D, Ulven C. Bio-based resin reinforced with flax fiber as thermorheologically complex materials Polymers. 8. DOI: 10.3390/Polym8040153 |
0.494 |
|
| 2016 |
Ehresmann M, Amiri A, Ulven C. The effect of different variables on in-plane radial permeability of natural fiber mats Journal of Reinforced Plastics and Composites. 37: 1191-1201. DOI: 10.1177/0731684416646458 |
0.533 |
|
| 2016 |
Flynn J, Amiri A, Ulven C. Hybridized carbon and flax fiber composites for tailored performance Materials and Design. 102: 21-29. DOI: 10.1016/J.Matdes.2016.03.164 |
0.568 |
|
| 2016 |
Hosseini N, Webster DC, Ulven C. Advanced biocomposite from highly functional methacrylated epoxidized sucrose soyate (MAESS) resin derived from vegetable oil and fiberglass fabric for composite applications European Polymer Journal. 79: 63-71. DOI: 10.1016/J.Eurpolymj.2016.04.012 |
0.594 |
|
| 2016 |
Amiri A, Ulven CA. Advanced method for void fraction evaluation of natural fiber composites using micro-ct technology International Sampe Technical Conference. 2016. |
0.457 |
|
| 2015 |
Hosseini N, Javid S, Amiri A, Ulven C, Webster DC, Karami G. Micromechanical viscoelastic analysis of flax fiber reinforced bio-based polyurethane composites Journal of Renewable Materials. 3: 205-215. DOI: 10.7569/Jrm.2015.634112 |
0.476 |
|
| 2015 |
Amiri A, Hosseini N, Ulven CA. Long-term creep behavior of flax/vinyl ester composites using time-temperature superposition principle Journal of Renewable Materials. 3: 224-233. DOI: 10.7569/Jrm.2015.634111 |
0.505 |
|
| 2015 |
Amiri A, Ulven CA, Huo S. Effect of chemical treatment of flax fiber and resin manipulation on service life of their Composites using time-temperature superposition Polymers. 7: 1965-1978. DOI: 10.3390/Polym7101493 |
0.712 |
|
| 2015 |
Wang H, Schubel P, Yi X, Zhu J, Ulven C, Qiu Y. Green Composite Materials Advances in Materials Science and Engineering. 2015: 1-1. DOI: 10.1155/2015/487416 |
0.403 |
|
| 2015 |
Chevali VS, Nerenz BA, Ulven CA, Kandare E. Mechanical Properties of Hybrid Lignocellulosic Fiber-Filled Acrylonitrile Butadiene Styrene (ABS) Biocomposites Polymer - Plastics Technology and Engineering. 54: 375-382. DOI: 10.1080/03602559.2014.961078 |
0.537 |
|
| 2015 |
Whitacre R, Amiri A, Ulven C. The effects of corn zein protein coupling agent on mechanical properties of flax fiber reinforced composites Industrial Crops and Products. 77: 232-238. DOI: 10.1016/J.Indcrop.2015.08.056 |
0.547 |
|
| 2015 |
Kalita H, Alam S, Kalita D, Jayasooriyamu A, Fernando S, Samanta S, Bahr J, Selvakumar S, Sibi M, Vold J, Ulven C, Chisholm BJ. Novel alkyd-type coating resins produced using cationic polymerization Journal of Coatings Technology Research. 12: 633-646. DOI: 10.1007/S11998-015-9667-2 |
0.381 |
|
| 2015 |
Jiang L, Ulven CA, Gutschmidt D, Anderson M, Balo S, Lee M, Vigness J. Recycling carbon fiber composites using microwave irradiation: Reinforcement study of the recycled fiber in new composites Journal of Applied Polymer Science. 132. DOI: 10.1002/App.42658 |
0.558 |
|
| 2014 |
Hosseini N, Ulven CA, Azarmi F, Webster DC, Nelson TJ. Utilization of flax fibers and glass fibers in a bio-based resin Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 14. DOI: 10.1115/IMECE2014-39393 |
0.506 |
|
| 2014 |
Kalita H, Selvakumar S, Jayasooriyamu A, Fernando S, Samanta S, Bahr J, Alam S, Sibi M, Vold J, Ulven C, Chisholm BJ. Bio-based poly(vinyl ether)s and their application as alkyd-type surface coatings Green Chemistry. 16: 1974-1986. DOI: 10.1039/C3Gc41868E |
0.375 |
|
| 2014 |
Vold JL, Ulven CA, Chisholm BJ. Torrefied biomass filled polyamide biocomposites: mechanical and physical property analysis Journal of Materials Science. 50: 725-732. DOI: 10.1007/S10853-014-8632-2 |
0.406 |
|
| 2014 |
Nordahl MP, Evert JD, Haring F, Robinson M, Hoey J, Ulven CA. Biocomposite stubstrates for electronics Camx 2014 - Composites and Advanced Materials Expo: Combined Strength. Unsurpassed Innovation.. |
0.37 |
|
| 2013 |
He J, Samanta S, Selvakumar S, Lattimer J, Ulven C, Sibi M, Bahr J, Chisholm BJ. Polyamides based on the renewable monomer, 1,13-tridecane diamine I: synthesis and characterization of nylon 13,T Green Materials. 1: 114-124. DOI: 10.1680/Gmat.12.00021 |
0.307 |
|
| 2013 |
Huo S, Ulven CA, Wang H, Wang X. Chemical and mechanical properties studies of chinese linen flax and its composites Polymers and Polymer Composites. 21: 275-286. DOI: 10.1177/096739111302100502 |
0.67 |
|
| 2013 |
Huo S, Thapa A, Ulven CA. Effect of surface treatments on interfacial properties of flax fiber-reinforced composites Advanced Composite Materials. 22: 109-121. DOI: 10.1080/09243046.2013.777996 |
0.74 |
|
| 2013 |
Samanta S, He J, Selvakumar S, Lattimer J, Ulven C, Sibi M, Bahr J, Chisholm BJ. Polyamides based on the renewable monomer, 1,13-tridecane diamine II: Synthesis and characterization of nylon 13,6 Polymer (United Kingdom). 54: 1141-1149. DOI: 10.1016/J.Polymer.2012.12.034 |
0.339 |
|
| 2013 |
Huo S, Chevali VS, Ulven CA. Study on interfacial properties of unidirectional flax/vinyl ester composites: Resin manipulation on vinyl ester system Journal of Applied Polymer Science. 128: 3490-3500. DOI: 10.1002/App.38565 |
0.727 |
|
| 2013 |
Fuqua MA, Chevali VS, Ulven CA. Lignocellulosic byproducts as filler in polypropylene: Comprehensive study on the effects of compatibilization and loading Journal of Applied Polymer Science. 127: 862-868. DOI: 10.1002/App.37820 |
0.779 |
|
| 2012 |
Yu ZC, Townsley M, Alcock M, Ulven C, Potter S. Developing Natural Fibre-Based Composite Materials for Canadian Industry Sectors Journal of Biobased Materials and Bioenergy. 6: 515-520. DOI: 10.1166/Jbmb.2012.1240 |
0.388 |
|
| 2012 |
Chevali VS, Nerenz BA, Ulven CA. Acrylonitrile butadiene styrene (ABS)/lignocellulosic fiber biocomposite: Effect of artificial weathering on impact properties Journal of Biobased Materials and Bioenergy. 6: 42-50. DOI: 10.1166/Jbmb.2012.1188 |
0.377 |
|
| 2012 |
Nerenz BA, Fuqua MA, Chevali VS, Ulven CA. Processing and characterization of a polypropylene biocomposite compounded with maleated and acrylated compatibilizers International Journal of Polymer Science. 2012. DOI: 10.1155/2012/472078 |
0.782 |
|
| 2012 |
Chevali VS, Ulven CA. Effect of extrusion screw speed on biocomposite thermo-mechanical properties International Journal of Sustainable Engineering. 5: 38-46. DOI: 10.1080/19397038.2010.547625 |
0.433 |
|
| 2012 |
Fuqua MA, Huo S, Ulven CA. Natural fiber reinforced composites Polymer Reviews. 52: 259-320. DOI: 10.1080/15583724.2012.705409 |
0.841 |
|
| 2012 |
Kugel A, He J, Samanta S, Bahr J, Lattimer JL, Fuqua MA, Ulven CA, Chisholm BJ. Semicrystalline Polyamide Engineering Thermoplastics Based on the Renewable Monomer, 1,9-Nonane Diamine: Thermal Properties and Water Absorption Polymer - Plastics Technology and Engineering. 51: 1266-1274. DOI: 10.1080/03602559.2012.699576 |
0.74 |
|
| 2012 |
Flynn JM, Ulven CA. Characterization of mechanical properties in hybridized flax and carbon fiber composites International Sampe Technical Conference. |
0.466 |
|
| 2012 |
Ehresmann M, Huo S, Ulven CA. Bast natural fiber reinforced soy-based polyurethane biocomposites Eccm 2012 - Composites At Venice, Proceedings of the 15th European Conference On Composite Materials. |
0.678 |
|
| 2011 |
Manamperi WAR, Fuqua MA, Ulven CA, Wiesenborn DP, Pryor SW. Effect of Canola Protein Extraction Parameters on Protein-Based Plastic Properties Journal of Biobased Materials and Bioenergy. 5: 500-506. DOI: 10.1166/Jbmb.2011.1174 |
0.713 |
|
| 2011 |
Foulk JA, Rho D, Alcock MM, Ulven CA, Huo S. Modifications caused by enzyme-retting and their effect on composite performance Advances in Materials Science and Engineering. 2011. DOI: 10.1155/2011/179023 |
0.699 |
|
| 2011 |
Espinoza-Perez JD, Nerenz BA, Haagenson DM, Chen Z, Ulven CA, Wiesenborn DP. Comparison of curing agents for epoxidized vegetable oils applied to composites Polymer Composites. 32: 1806-1816. DOI: 10.1002/Pc.21213 |
0.508 |
|
| 2011 |
Chevali V, Fuqua M, Ulven CA. Vegetable Oil Based Rigid Foam Composites Handbook of Bioplastics and Biocomposites Engineering Applications. 268-283. DOI: 10.1002/9781118203699.ch9 |
0.484 |
|
| 2011 |
Mekic S, Bakke B, Ehresmann M, Ulven CA. Unsaturated transverse permeability of natural fiber preforms for biocomposite materials International Sampe Technical Conference. |
0.827 |
|
| 2010 |
Fuqua MA, Huo S, Chevali VS, Ulven CA. Development of flax fiber/soy-based polyurethane composites for mass transit flooring application Sae International Journal of Materials and Manufacturing. 3: 230-236. DOI: 10.4271/2010-01-0428 |
0.846 |
|
| 2010 |
Huo S, Fuqua M, Chevali VS, Ulven CA. Effects of natural fiber surface treatments and matrix modification on mechanical properties of their composites Sae Technical Papers. DOI: 10.4271/2010-01-0426 |
0.685 |
|
| 2010 |
Chevali VS, Fuqua MA, Huo S, Ulven CA. Utilization of agricultural by-products as fillers and reinforcements in ABS Sae International Journal of Materials and Manufacturing. 3: 221-229. DOI: 10.4271/2010-01-0424 |
0.819 |
|
| 2010 |
Espinoza-Pérez JD, Ulven CA, Wiesenborn DP. Epoxidized high-oleic vegetable oils applied to composites Transactions of the Asabe. 53: 1167-1174. DOI: 10.13031/2013.32573 |
0.516 |
|
| 2010 |
Foulk JA, Fuqua MA, Ulven CA, Alcock MM. Flax fibre quality and influence on interfacial properties of composites International Journal of Sustainable Engineering. 3: 17-24. DOI: 10.1080/19397030903348710 |
0.787 |
|
| 2009 |
Sui G, Fuqua MA, Ulven CA, Zhong WH. A plant fiber reinforced polymer composite prepared by a twin-screw extruder. Bioresource Technology. 100: 1246-51. PMID 18842402 DOI: 10.1016/J.Biortech.2008.03.065 |
0.828 |
|
| 2009 |
Mekic S, Ulven CA, Akhatov IS, Jerke E, Kerr-Anderson E. Evalutation of in-plane and transverse permeability of flax fiber preforms for biocomposite materials Journal of Biobased Materials and Bioenergy. 3: 156-164. DOI: 10.1166/Jbmb.2009.1020 |
0.836 |
|
| 2009 |
La Scala JJ, Orlicki JA, Jain R, Ulven CA, Palmese GR, Vaidya UK, Sands JM. Emission modeling of styrene from vinyl ester resins with low hazardous air pollutant contents Clean Technologies and Environmental Policy. 11: 283-292. DOI: 10.1007/S10098-008-0181-4 |
0.636 |
|
| 2009 |
Mekic S, Akhatov IS, Ulven CA. Analysis of a radial infusion model for in-plane permeability measurements of fiber reinforcement in composite materials Polymer Composites. 30: 1788-1799. DOI: 10.1002/Pc.20750 |
0.787 |
|
| 2009 |
Mekic S, Akhatov I, Ulven C. A radial infusion model for transverse permeability measurements of fiber reinforcement in composite materials Polymer Composites. 30: 907-917. DOI: 10.1002/Pc.20632 |
0.805 |
|
| 2009 |
Fuqua MA, Huo S, Ulven CA. Preparation and characterization of poly(methyl methacrylate) composites reinforced with lignocellulosic fiber International Sampe Symposium and Exhibition (Proceedings). 54. |
0.841 |
|
| 2009 |
Fuqua M, Huo S, Thapa A, Gibbon L, Ulven CA. Challenges in manufacturing oilseed versus linen flax fiber reinforced composites International Sampe Symposium and Exhibition (Proceedings). 54. |
0.453 |
|
| 2009 |
Dionne L, Hanson M, Ulven CA, Kottke D, Huotari D. Mechanical characterization of flax fiber reinforced soybean oil-based rigid polyurethane foam composites International Sampe Symposium and Exhibition (Proceedings). 54. |
0.521 |
|
| 2009 |
Pérez JDE, Wiesenborn DP, Ulven CA, Haagenson DM, Brudvik RL. Epoxy resins from high-oleic oils applied to composites American Society of Agricultural and Biological Engineers Annual International Meeting 2009, Asabe 2009. 1: 1-14. |
0.322 |
|
| 2009 |
Manamperi WA, Sehrawat J, Fuqua MA, Ulven CA, Pryor SW. Influence of plasticizers on properties of polymers made from canola protein polyester blends American Society of Agricultural and Biological Engineers Annual International Meeting 2009, Asabe 2009. 5: 3409-3418. |
0.734 |
|
| 2008 |
Fuqua MA, Ulven CA. Characterization of polypropylene/corn fiber composites with maleic anhydride grafted polypropylene Journal of Biobased Materials and Bioenergy. 2: 258-263. DOI: 10.1166/jbmb.2008.405 |
0.828 |
|
| 2008 |
Ulven CA, Vaidya UK. Impact response of fire damaged polymer-based composite materials Composites Part B: Engineering. 39: 92-107. DOI: 10.1016/J.Compositesb.2007.02.008 |
0.674 |
|
| 2008 |
Abolfathi N, Naik A, Karami G, Ulven C. A micromechanical characterization of angular bidirectional fibrous composites Computational Materials Science. 43: 1193-1206. DOI: 10.1016/J.Commatsci.2008.03.017 |
0.551 |
|
| 2008 |
Sui G, Jana S, Zhong WH, Fuqua MA, Ulven CA. Dielectric properties and conductivity of carbon nanofiber/semi-crystalline polymer composites Acta Materialia. 56: 2381-2388. DOI: 10.1016/J.Actamat.2008.01.034 |
0.774 |
|
| 2008 |
Ren X, Wang XQ, Sui G, Zhong WH, Fuqua MA, Ulven CA. Effects of carbon nanofibers on crystalline structures and properties of ultrahigh molecular weight polyethylene blend fabricated using twin-screw extrusion Journal of Applied Polymer Science. 107: 2837-2845. DOI: 10.1002/App.27354 |
0.79 |
|
| 2008 |
Fuqua MA, Ulven CA. Characterization of polypropylene composites reinforced with modified lignocellulosic fiber International Sampe Symposium and Exhibition (Proceedings). 52. |
0.822 |
|
| 2008 |
Fuqua MA, Ulven CA. Preparation and characterization of polypropylene Composites reinforced with modified lignocellulosic corn fiber American Society of Agricultural and Biological Engineers Annual International Meeting 2008, Asabe 2008. 7: 4507-4517. |
0.818 |
|
| 2008 |
Fuqua M, Ulven CA. Reinforcing thermoplastics with natural fibers derived from biofuel byproducts - Extended abstract Aiche Annual Meeting, Conference Proceedings. |
0.394 |
|
| 2008 |
Fuqua MA, Huo S, Ulven CA. Preparation and characterization of commodity thermoplastics reinforced with natural fiber byproduct International Sampe Technical Conference. |
0.835 |
|
| 2008 |
Mosbrucker J, Hanson M, Gibbon L, Ulven CA. Modeling high velocity impact of fire exposed sandwich composites International Sampe Technical Conference. |
0.346 |
|
| 2008 |
Hanson M, Huotari D, Ulven CA, Kottke D. Mechanical characterization of compression molded flax fiber reinforced rigid polyurethane foam composites International Sampe Symposium and Exhibition (Proceedings). 52. |
0.524 |
|
| 2007 |
Sui G, Zhong WH, Fuqua MA, Ulven CA. Crystalline structure and properties of carbon nanofiber composites prepared by melt extrusion Macromolecular Chemistry and Physics. 208: 1928-1936. DOI: 10.1002/Macp.200700170 |
0.796 |
|
| 2007 |
Mekic S, Ulven CA, Akhatov I. Nanoclay/epoxy solution flow through reinforcing fabric during liquid molding International Sampe Symposium and Exhibition (Proceedings). 52. |
0.786 |
|
| 2007 |
Zhong WH, Sui G, Fuqua MA, Ulven CA. Conducting properties of polypropylene/carbon nanofiber composites Iccm International Conferences On Composite Materials. |
0.767 |
|
| 2007 |
Sui G, Zhong W, Fuqua MA, Ulven CA. Properties of polypropylene composites fabricated using twin-screw extrusion Iccm International Conferences On Composite Materials. |
0.796 |
|
| 2007 |
Sui G, Zhong WH, Fuqua MA, Ulven CA. Morphology and properties of carbon nanofiber composites fabricated using twinscrew extruder International Sampe Symposium and Exhibition (Proceedings). 52. |
0.779 |
|
| 2007 |
Mosbrucker J, Miller B, Ulven CA, Vaidya UK. High velocity impact response of fire damaged polymer matrix composites International Sampe Symposium and Exhibition (Proceedings). 52. |
0.368 |
|
| 2007 |
Espinoza-Perez JD, Wiesenborn DP, Tostenson K, Ulven CA, Tatlari M. Preparation and partial characterization of canola-based epoxy resins for bio-based plastic composites 2007 Asabe Annual International Meeting, Technical Papers. 12. |
0.374 |
|
| 2006 |
Bartus SD, Vaidya UK, Ulven CA. Design and development of a long fiber thermoplastic bus seat Journal of Thermoplastic Composite Materials. 19: 131-154. DOI: 10.1177/0892705706062184 |
0.813 |
|
| 2006 |
Vaidya UK, Pillay S, Bartus S, Ulven CA, Grow DT, Mathew B. Impact and post-impact vibration response of protective metal foam composite sandwich plates Materials Science and Engineering A. 428: 59-66. DOI: 10.1016/J.Msea.2006.04.114 |
0.798 |
|
| 2006 |
Ulven CA, Vaidya UK. Post-fire low velocity impact response of marine grade sandwich composites Composites Part a: Applied Science and Manufacturing. 37: 997-1004. DOI: 10.1016/J.Compositesa.2005.03.001 |
0.644 |
|
| 2006 |
La Scala JJ, Ulven CA, Orlicki JA, Jain R, Palmese GR, Vaidya UK, Sands JM. Emission modeling of styrene from vinyl ester resins Clean Technologies and Environmental Policy. 9: 265-279. DOI: 10.1007/S10098-006-0076-1 |
0.63 |
|
| 2006 |
Ulven CA, Vaidya UK. Impact response of fire damaged polymer matrix composites International Sampe Symposium and Exhibition (Proceedings). 51. |
0.333 |
|
| 2006 |
Sailer N, Tatlari M, Ulven CA, Pillay S, Vaidya UK. Comparison of flax fiber and sisal fiber reinforced composites for structural applications International Sampe Technical Conference. |
0.437 |
|
| 2006 |
Tatlari M, Sailer N, Ulven CA, Wiesenborn DP, Tostenson K, Polansky P, Krog A. Vegetable oil-based epoxy resin for structural composite material manufacturing American Society For Composites - 21st Technical Conference of the American Society For Composites 2006. 2: 851-861. |
0.399 |
|
| 2006 |
Tatlari M, Ulven CA, Sailer N, Wiesenborn DP, Tostenson K, Polansky P, Krog A. Vegetable oil-based epoxy/E-glass composite materals: Properties and synthesis International Sampe Technical Conference. |
0.445 |
|
| 2004 |
Hosur M, Vaidya U, Ulven C, Jeelani S. Performance of stitched/unstitched woven carbon/epoxy composites under high velocity impact loading Composite Structures. 64: 455-466. DOI: 10.1016/J.Compstruct.2003.09.046 |
0.687 |
|
| 2004 |
Ulven CA, Vaidya UK. Post-fire impact response of VARTM glass/vinyl ester balsa core sandwich composites International Sampe Symposium and Exhibition (Proceedings). 49: 1503-1510. |
0.345 |
|
| 2003 |
Vaidya UK, Ulven CA, Hosur MV, Alexander J, Liudahl L. Intermediate velocity impact response of carbon/epoxy composites with polycarbonate facing Polymers & Polymer Composites. 11: 421-432. DOI: 10.1177/096739110301100601 |
0.701 |
|
| 2003 |
Vaidya UK, Ulven C, Pillay S, Ricks H. Impact Damage of Partially Foam-filled Co-injected Honeycomb Core Sandwich Composites Journal of Composite Materials. 37: 611-626. DOI: 10.1177/002199803029724 |
0.66 |
|
| 2003 |
Ulven C, Vaidya U, Hosur M. Effect of projectile shape during ballistic perforation of VARTM carbon/epoxy composite panels Composite Structures. 61: 143-150. DOI: 10.1016/S0263-8223(03)00037-0 |
0.691 |
|
| 2003 |
Vaidya UK, Ulven CA, Hosur MV, Alexander J, Liudahl L. Intermediate Velocity Impact Response of Carbon/Epoxy Composites with Polycarbonate Facing Polymers and Polymer Composites. 11: 421-432. |
0.356 |
|
| 2001 |
Vaidya UK, Pillay S, Ricks H, Bartus S, Ulven C, Mathew B. Design of Sandwich Composites with Multi-Functional Facesheets Mrs Proceedings. 702. DOI: 10.1557/Proc-702-U7.4.1 |
0.776 |
|
| Show low-probability matches. |
