Year |
Citation |
Score |
2020 |
Shen H, Yao D, Zhang W, Ye Q. Modeling and Simulation of the Process for the Generation of Gradient Porous Structures From Immiscible Polymer Blends Journal of Manufacturing Science and Engineering. 142. DOI: 10.1115/1.4045722 |
0.352 |
|
2020 |
Yi H, Hu M, Yao D, Lin H, Zheng B. Tribological and thermomechanical properties of epoxy-matrix nanocomposites containing montmorillonite nanoclay intercalated with polybutadiene-based quaternary ammonium salt Plastics Rubber and Composites. 1-11. DOI: 10.1080/14658011.2020.1776921 |
0.301 |
|
2020 |
Jia J, Chen K, Zeng T, Yao D, Wang C. Reversibly Superwettable Polyester Fabric Based on pH-Responsive Branched Polymer Nanoparticles Industrial & Engineering Chemistry Research. 59: 2899-2907. DOI: 10.1021/Acs.Iecr.9B05509 |
0.311 |
|
2020 |
Shi J, Yao D. A Simple Process for Making Supercontraction Fiber From Polycaprolactone/Elastomer Blends Polymer Engineering & Science. 60: 793-801. DOI: 10.1002/Pen.25337 |
0.314 |
|
2019 |
Xu Q, Yi H, Gao X, Shi J, Yao D. Recycling of Polyethylene Bags into High‐Strength Yarns Without Using Melt Processing Polymer Engineering & Science. 60: 281-287. DOI: 10.1002/Pen.25281 |
0.359 |
|
2019 |
Shi J, Fang X, Maffe AP, Yao D. An effective method of processing immiscible polymer blends into strong fiber Polymer Engineering & Science. 59: 2052-2061. DOI: 10.1002/Pen.25205 |
0.397 |
|
2016 |
Yang M, Li J, Li Y, Li R, Pang Y, Yao D, Liao W, Chen H. Altered Intrinsic Regional Activity and Interregional Functional Connectivity in Post-stroke Aphasia. Scientific Reports. 6: 24803. PMID 27091494 DOI: 10.1038/srep24803 |
0.376 |
|
2016 |
Fang X, Shi J, Wyatt T, Yao D. Twist-film gel spinning of large-diameter high-performance ultra-high molecular weight polyethylene monofilaments Textile Research Journal. 87: 2323-2336. DOI: 10.1177/0040517516669079 |
0.333 |
|
2016 |
Lakho DA, Yao D, Cho K, Ishaq M, Wang Y. Study of the Curing Kinetics toward Development of Fast-Curing Epoxy Resins Polymer-Plastics Technology and Engineering. 56: 161-170. DOI: 10.1080/03602559.2016.1185623 |
0.347 |
|
2016 |
Fang X, Bi C, Hong Y, Cho KH, Park MS, Wang Y, Yao D. Rapid Vacuum Infusion and Curing of Epoxy Composites with a Rubber-Cushioned Mold Design Polymer - Plastics Technology and Engineering. 55: 1030-1038. DOI: 10.1080/03602559.2015.1132453 |
0.396 |
|
2016 |
Zhao D, Wang H, Wang L, Wang M, Yao D. Experimental and numerical study of microchannel formation in rubber-assisted hot embossing with an open-channel mold Microsystem Technologies. 1-7. DOI: 10.1007/S00542-016-2898-Z |
0.406 |
|
2016 |
Fang X, Wyatt T, Hong Y, Yao D. Gel spinning of UHMWPE fibers with polybutene as a new spin solvent Polymer Engineering and Science. DOI: 10.1002/Pen.24296 |
0.342 |
|
2016 |
Mao Q, Wyatt TP, Chien AT, Chen J, Yao D. Melt spinning of high-strength fiber from low-molecular-weight polypropylene Polymer Engineering and Science. 56: 233-239. DOI: 10.1002/Pen.24251 |
0.366 |
|
2016 |
Hong Y, Fang X, Yao D. Modeling of expandable polystyrene expansion Journal of Applied Polymer Science. 133. DOI: 10.1002/App.43886 |
0.346 |
|
2015 |
Yao DL, Zhang CH, Li R, Luo J, Jin M, Piao JH, Zheng MS, Cui JM, Son JK, Li G. Two new conjugated ketonic fatty acids from the stem bark of Juglans mandshurica. Chinese Journal of Natural Medicines. 13: 299-302. PMID 25908628 DOI: 10.1016/S1875-5364(15)30018-2 |
0.384 |
|
2015 |
Lü Y, Cui X, Li R, Huang P, Zong J, Yao D, Li G, Zhang D, Yuan Z. Development of genome-wide insertion/deletion markers in rice based on graphic pipeline platform. Journal of Integrative Plant Biology. PMID 25809845 DOI: 10.1111/jipb.12354 |
0.383 |
|
2015 |
Mao Q, Hong Y, Wyatt TP, Chen J, Wang Y, Wang J, Yao D. Insert injection molding of polypropylene single-polymer composites Composites Science and Technology. 106: 47-54. DOI: 10.1016/J.Compscitech.2014.11.002 |
0.377 |
|
2015 |
Lv F, Yao D, Wang Y, Wang C, Zhu P, Hong Y. Recycling of waste nylon 6/spandex blended fabrics by melt processing Composites Part B: Engineering. 77: 232-237. DOI: 10.1016/J.Compositesb.2015.03.038 |
0.392 |
|
2015 |
Fang X, Wyatt T, Wu J, Yao D. An effective and simple process for obtaining high strength silkworm (Bombyx mori) silk fiber Fibers and Polymers. 16: 2609-2616. DOI: 10.1007/S12221-015-5170-8 |
0.336 |
|
2015 |
Hong Y, Fang X, Yao D. Processing of composite polystyrene foam with a honeycomb structure Polymer Engineering & Science. 55: 1494-1503. DOI: 10.1002/Pen.24099 |
0.36 |
|
2015 |
Wyatt T, Gainey T, Fang X, Yao D. Direct drawing of gel fibers enabled by twist-gel spinning process Polymer Engineering & Science. 55: 1389-1395. DOI: 10.1002/Pen.24082 |
0.337 |
|
2015 |
Wyatt T, Deng Y, Yao D. Fast solvent removal by mechanical twisting for gel spinning of ultrastrong fibers Polymer Engineering and Science. 55: 745-752. DOI: 10.1002/Pen.23940 |
0.317 |
|
2014 |
Yao D, Jin M, Zhang C, Luo J, Li R, Zheng M, Cui J, Li G. A new phenolic glycoside from Juglans mandshurica. Natural Product Research. 28: 998-1002. PMID 24697220 DOI: 10.1080/14786419.2014.902946 |
0.368 |
|
2014 |
Jia J, Yao D, Wang Y. Melt spinning of continuous fibers by cold air attenuation I: experimental studies Textile Research Journal. 84: 593-603. DOI: 10.1177/0040517513494250 |
0.35 |
|
2014 |
Hong Y, Zhou JG, Yao D. Porogen Templating Processes: An Overview Journal of Manufacturing Science and Engineering-Transactions of the Asme. 136: 31013. DOI: 10.1115/1.4026899 |
0.314 |
|
2014 |
Hong Y, Fang X, Yao D. Microwave processing of syntactic foam from an expandable thermoset/thermoplastic mixture Polymer Engineering & Science. 55: 1818-1828. DOI: 10.1002/Pen.24021 |
0.406 |
|
2014 |
Wyatt TP, Chien A, Kumar S, Yao D. Development of a gel spinning process for high‐strength poly(ethylene oxide) fibers Polymer Engineering and Science. 54: 2839-2847. DOI: 10.1002/Pen.23842 |
0.398 |
|
2013 |
Jia J, Yao D, Wang Y. Melt spinning of continuous fibers by cold air attenuation: II. Theoretical modeling Textile Research Journal. 84: 604-613. DOI: 10.1177/0040517513499427 |
0.315 |
|
2013 |
Yin Y, Yao D, Wang C, Wang Y. Removal of spandex from nylon/spandex blended fabrics by selective polymer degradation Textile Research Journal. 84: 16-27. DOI: 10.1177/0040517513487790 |
0.367 |
|
2013 |
Hong Y, Yao D. Formation and characterization of co-continuous shear thickening fluid/polymer blends Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2013-63828 |
0.312 |
|
2013 |
Zhang H, Li L, Scheiding S, Gebhardt A, Risse S, Eberhardt R, Tünnermann A, Yao D, Yi AY. Fabrication of Three-Dimensional Functional Microstructures on Curved Substrates Using Three-Dimensional Microlens Projection Journal of Micro and Nano-Manufacturing. 1. DOI: 10.1115/1.4025060 |
0.306 |
|
2013 |
Hong Y, Yao D. Mechanical behavior of porous polysiloxane with micropores interconnected by microchannels Polymer Engineering & Science. 54: 1512-1522. DOI: 10.1002/Pen.23688 |
0.364 |
|
2013 |
Zhang W, Li M, Wang C, Zhou JG, Yao D. Micropatterning of Porous Structures from Co/Continuous Polymer Blends Advances in Polymer Technology. 32. DOI: 10.1002/Adv.21260 |
0.428 |
|
2012 |
Zhang H, Li L, McCray DL, Yao D, Yi AY. A microlens array on curved substrates by 3D micro projection and reflow process Sensors and Actuators a: Physical. 179: 242-250. DOI: 10.1016/J.Sna.2012.03.002 |
0.35 |
|
2012 |
Zhao D, Wyatt T, Wang M, Yi A, Yao D. Rubber-assisted embossing of polymer thin films using molds with through-thickness microchannels Microsystem Technologies. 18: 481-488. DOI: 10.1007/S00542-012-1425-0 |
0.405 |
|
2012 |
Hong Y, Zhou JG, Yao D. Fabrication of Interconnected Porous Elastomers by a Microsphere-Templating Process Advances in Polymer Technology. 32. DOI: 10.1002/Adv.21330 |
0.445 |
|
2011 |
Zhou C, Ma L, Li W, Yao D. Fabrication of tissue engineering scaffolds through solid-state foaming of immiscible polymer blends Biofabrication. 3. PMID 21904025 DOI: 10.1088/1758-5082/3/4/045003 |
0.383 |
|
2011 |
Dai P, Zhang W, Pan Y, Chen J, Wang Y, Yao D. Processing of single polymer composites with undercooled polymer melt Composites Part B-Engineering. 42: 1144-1150. DOI: 10.1016/J.Compositesb.2011.03.018 |
0.45 |
|
2011 |
Nagarajan P, Yao D. Uniform shell patterning using rubber-assisted hot embossing process. I. Experimental Polymer Engineering and Science. 51: 592-600. DOI: 10.1002/Pen.21855 |
0.604 |
|
2011 |
Nagarajan P, Yao D. Uniform shell patterning using rubber-assisted hot embossing process. II. Process analysis Polymer Engineering and Science. 51: 601-608. DOI: 10.1002/Pen.21854 |
0.568 |
|
2011 |
Yao D. Polymer Micro-Molding/Forming Processes Micro-Manufacturing: Design and Manufacturing of Micro-Products. 197-233. DOI: 10.1002/9781118010570.ch7 |
0.315 |
|
2010 |
Zhang W, Deodhar S, Yao D. Geometrical confining effects in compression molding of co-continuous polymer blends. Annals of Biomedical Engineering. 38: 1954-64. PMID 20361258 DOI: 10.1007/S10439-010-0026-2 |
0.404 |
|
2010 |
Zhang W, Deodhar S, Yao D. Processing properties of polypropylene with a minor addition of silicone oil Polymer Engineering & Science. 50: 1340-1349. DOI: 10.1002/Pen.21665 |
0.348 |
|
2010 |
Li R, Yao D, Sun Q, Deng Y. Fusion bonding of supercooled poly(ethylene terephthalate) between Tg and Tm Journal of Applied Polymer Science. 119: 3101-3112. DOI: 10.1002/App.33070 |
0.563 |
|
2009 |
Yao D, Zhang W, Zhou JG. Controllable growth of gradient porous structures. Biomacromolecules. 10: 1282-6. PMID 19354280 DOI: 10.1021/Bm900008D |
0.371 |
|
2009 |
Azadegan R, Nagarajan P, Yao D, Ellis TS. Polymer micro hot embossing for the fabrication of three-dimensional millimeter-wave components Ieee Antennas and Propagation Society, Ap-S International Symposium (Digest). DOI: 10.1109/APS.2009.5172010 |
0.498 |
|
2009 |
Kimerling TE, Yao D, Kim BH. Injection Molding Poly(Para-phenylene) with a Rapidly Heated Mold Polymer-Plastics Technology and Engineering. 48: 1008-1013. DOI: 10.1080/03602550903092518 |
0.439 |
|
2009 |
Nagarajan P, Yao D. Rubber-assisted micro forming of polymer thin films Microsystem Technologies. 15: 251-257. DOI: 10.1007/S00542-008-0680-6 |
0.593 |
|
2009 |
Fagan MD, Kim BH, Yao D. A novel process for continuous thermal embossing of large-area nanopatterns onto polymer films Advances in Polymer Technology. 28: 246-256. DOI: 10.1002/Adv.20167 |
0.459 |
|
2008 |
Chen Y, Yi AY, Yao D, Klocke F, Pongs G. A reflow process for glass microlens array fabrication by use of precision compression molding Journal of Micromechanics and Microengineering. 18: 055022. DOI: 10.1088/0960-1317/18/5/055022 |
0.399 |
|
2008 |
Yao D, Kuduva-Raman-Thanumoorthy R. An enlarged process window for hot embossing Journal of Micromechanics and Microengineering. 18: 045023. DOI: 10.1088/0960-1317/18/4/045023 |
0.366 |
|
2008 |
Kuduva-Raman-Thanumoorthy R, Yao D. Hot embossing of discrete microparts Technical Papers, Regional Technical Conference - Society of Plastics Engineers. 4: 2487-2491. DOI: 10.1002/Pen.21422 |
0.414 |
|
2008 |
Li R, Yao D. Preparation of single poly(lactic acid) composites Journal of Applied Polymer Science. 107: 2909-2916. DOI: 10.1002/App.27406 |
0.618 |
|
2008 |
Yao D, Chen S, Kim BH. Rapid thermal cycling of injection molds: An overview on technical approaches and applications Advances in Polymer Technology. 27: 233-255. DOI: 10.1002/Adv.20136 |
0.41 |
|
2007 |
Yao D, Nagarajan P, Ramasubramani KRT. Constant temperature microfeature embossing with slowly crystallizing polymers International Polymer Processing. 22: 375-379. DOI: 10.3139/217.2047 |
0.592 |
|
2007 |
Kim S, Shiau C, Kim BH, Yao D. Injection Molding Nanoscale Features with the Aid of Induction Heating Polymer-Plastics Technology and Engineering. 46: 1031-1037. DOI: 10.1080/03602550701522344 |
0.387 |
|
2007 |
Nagaraja P, Yao D. Rapid pattern transfer of biomimetic surface structures onto thermoplastic polymers Materials Science and Engineering C. 27: 794-797. DOI: 10.1016/J.Msec.2006.08.021 |
0.336 |
|
2007 |
Nagarajan P, Yao D, Ellis TS, Azadegan R. Through-thickness embossing process for fabrication of three-dimensional thermoplastic parts Polymer Engineering and Science. 47: 2075-2084. DOI: 10.1002/Pen.20924 |
0.618 |
|
2007 |
Yao D, Nagarajan P, Li L, Yi AY. A two-station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers Polymer Engineering and Science. 47: 530-539. DOI: 10.1002/Pen.20721 |
0.621 |
|
2006 |
Yao D, Smith A, Nagarajan P, Vasquez A, Dang L, Chaudhry GR. Fabrication of polycaprolactone scaffolds using a sacrificial compression-molding process. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 77: 287-95. PMID 16292759 DOI: 10.1002/Jbm.B.30419 |
0.548 |
|
2006 |
Yao D, Nagarajan P, Li L, Yi AY. A strategy for rapid thermal cycling of molds in thermoplastic processing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 837-843. DOI: 10.1115/1.2335855 |
0.573 |
|
2006 |
Park K, Kim B, Yao D. Numerical Simulation for Injection Molding with a Rapidly Heated Mold, Part II: Birefringence Prediction Polymer-Plastics Technology and Engineering. 45: 903-909. DOI: 10.1080/03602550600718167 |
0.333 |
|
2006 |
Park K, Kim B, Yao D. Numerical Simulation for Injection Molding with a Rapidly Heated Mold, Part I: Flow Simulation for Thin Wall Parts Polymer-Plastics Technology and Engineering. 45: 897-902. DOI: 10.1080/03602550600718142 |
0.375 |
|
2006 |
Kimerling TE, Liu W, Kim BH, Yao D. Rapid hot embossing of polymer microfeatures Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems. 12: 730-735. DOI: 10.1007/S00542-006-0098-Y |
0.459 |
|
2006 |
Yao D, Li R, Nagarajan P. Single-polymer composites based on slowly crystallizing polymers Polymer Engineering and Science. 46: 1223-1230. DOI: 10.1002/Pen.20583 |
0.695 |
|
2006 |
Yao D, Kimerling TE, Kim B. High‐frequency proximity heating for injection molding applications Polymer Engineering and Science. 46: 938-945. DOI: 10.1002/Pen.20548 |
0.345 |
|
2006 |
Nagarajan P, Yao D. Rubber-assisted hot embossing for structuring thin film polymeric films American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) Mems. |
0.526 |
|
2005 |
Chen H, Yao D, Li R, Chen W. A projection-based image registration algorithm and its application. Brain Topography. 18: 47-58. PMID 16193266 DOI: 10.1007/s10548-005-7900-5 |
0.383 |
|
2005 |
Yao D, Virupaksha VL, Kim B. Study on squeezing flow during nonisothermal embossing of polymer microstructures Polymer Engineering and Science. 45: 652-660. DOI: 10.1002/Pen.20322 |
0.382 |
|
2005 |
Nagarajan P, Yao D. Cold forging behavior of semicrystalline polymers Journal of Applied Polymer Science. 96: 764-771. DOI: 10.1002/App.21516 |
0.604 |
|
2005 |
Nagarajan P, Yao D. Homocomposites of poly(ethylene terephthalate) Annual Technical Conference - Antec, Conference Proceedings. 4: 289-293. |
0.565 |
|
2004 |
Yao D, Kim B. Scaling Issues in Miniaturization of Injection Molded Parts Journal of Manufacturing Science and Engineering. 126: 733-739. DOI: 10.1115/1.1813479 |
0.314 |
|
2004 |
Yao D, Nagarajan P. Cold forging method for polymer microfabrication Annual Technical Conference - Antec, Conference Proceedings. 3: 3112-3116. DOI: 10.1002/pen.20203 |
0.554 |
|
2004 |
Yao D, Nagarajan P. Cold forging method for polymer microfabrication Annual Technical Conference - Antec, Conference Proceedings. 3: 3112-3116. DOI: 10.1002/Pen.20203 |
0.595 |
|
2004 |
Nagarajan P, Yao D. Forging behavior of nylon Annual Technical Conference - Antec, Conference Proceedings. 3: 2892-2896. |
0.563 |
|
2003 |
Yao D, Kim B. Developing rapid heating and cooling systems using pyrolytic graphite Applied Thermal Engineering. 23: 341-352. DOI: 10.1016/S1359-4311(02)00191-6 |
0.323 |
|
2002 |
Yao D, Kim B. Simulation of the filling process in micro channels for polymeric materials Journal of Micromechanics and Microengineering. 12: 604-610. DOI: 10.1088/0960-1317/12/5/314 |
0.348 |
|
2002 |
Yao D, Kim B. Increasing flow length in thin wall injection molding using a rapidly heated mold Polymer - Plastics Technology and Engineering. 41: 819-832. DOI: 10.1081/Ppt-120014390 |
0.393 |
|
2002 |
Yao D, Kim B. Development of rapid heating and cooling systems for injection molding applications Polymer Engineering and Science. 42: 2471-2481. DOI: 10.1002/Pen.11133 |
0.349 |
|
2002 |
Yao D, Kim B. Injection molding high aspect ratio microfeatures Journal of Injection Molding Technology. 6: 11-17. |
0.317 |
|
2001 |
Chen M, Yao D, Kim B. Eliminating Flow Induced Birefringence And Minimizing Thermally Induced Residual Stresses In Injection Molded Parts Polymer-Plastics Technology and Engineering. 40: 491-503. DOI: 10.1081/Ppt-100002072 |
0.342 |
|
1999 |
Sahu R, Yao D, Kim B. Simulation of Filling Pattern of Multicomponent Injection Molding Polymer-Plastics Technology and Engineering. 38: 241-254. DOI: 10.1080/03602559909351574 |
0.339 |
|
Show low-probability matches. |