Year |
Citation |
Score |
2020 |
Srivastava N, Chaudhari GP. Grain refinement in ultrasonicated binary aluminium alloys Journal of Crystal Growth. 532: 125415. DOI: 10.1016/J.Jcrysgro.2019.125415 |
0.474 |
|
2020 |
Kumar N, Chaudhari GP, Meka SR. Investigation of Low-Temperature Liquid Nitriding Conditions for 316 Stainless Steel for Improved Mechanical and Corrosion Response Transactions of the Indian Institute of Metals. 73: 235-242. DOI: 10.1007/S12666-019-01827-5 |
0.423 |
|
2020 |
Rajput SK, Mehta Y, Chaudhari GP, Nath SK. Optimized Thermomechanical Processing for Fine-Grained Dual-Phase Microstructure Using Deformation-Induced Ferrite Transformation Journal of Materials Engineering and Performance. 29: 4260-4274. DOI: 10.1007/S11665-020-04965-W |
0.434 |
|
2019 |
Kumar S, Chaudhari GP, Nath SK. Critical Conditions for Dynamic Recrystallization of Hot Deformed 1 wt% Chromium - 1 wt% Molybdenum Rotor Steel Materials Performance and Characterization. 8: 20190022. DOI: 10.1520/Mpc20190022 |
0.429 |
|
2019 |
Srivastava N, Chaudhari GP. Effect of ultrasonic treatment on the mechanical behaviour of Al–Ni alloys Materials Science and Technology. 35: 1239-1247. DOI: 10.1080/02670836.2019.1618621 |
0.467 |
|
2018 |
Srivastava N, Gupta R, Chaudhari GP. Effect of high power ultrasound on mechanical properties of Al-Si alloys Iop Conference Series: Materials Science and Engineering. 330: 012023. DOI: 10.1088/1757-899X/330/1/012023 |
0.309 |
|
2018 |
Gupta R, Chaudhari GP, Daniel BSS. Effect of in-situ formed Al3Ti particles on the microstructure and mechanical properties of 6061 Al alloy Iop Conference Series: Materials Science and Engineering. 330: 012012. DOI: 10.1088/1757-899X/330/1/012012 |
0.37 |
|
2018 |
Kishor B, Chaudhari GP, Nath SK. Slurry erosion behaviour of thermomechanically treated 16Cr5Ni stainless steel Tribology International. 119: 411-418. DOI: 10.1016/J.Triboint.2017.11.025 |
0.492 |
|
2018 |
Srivastava N, Chaudhari GP. Microstructural evolution and mechanical behavior of ultrasonically synthesized Al6061-nano alumina composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 724: 199-207. DOI: 10.1016/J.Msea.2018.03.092 |
0.436 |
|
2018 |
Kishor B, Chaudhari GP, Nath SK. Hot Workability of 16Cr-5Ni Stainless Steel Using Constitutive Equation and Processing Map Materials Today: Proceedings. 5: 17213-17222. DOI: 10.1016/J.Matpr.2018.04.131 |
0.444 |
|
2018 |
Gupta R, Chaudhari GP, Daniel BSS. Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition Composites Part B-Engineering. 140: 27-34. DOI: 10.1016/J.Compositesb.2017.12.005 |
0.494 |
|
2018 |
Mehta Y, Rajput SK, Chaudhari GP, Dabhade VV. Dynamic Recrystallization and Grain Refinement of Fe-P-C-Si and Fe-P-C-Si-N Steels Journal of Materials Engineering and Performance. 27: 4770-4782. DOI: 10.1007/S11665-018-3531-3 |
0.533 |
|
2017 |
Saxena KK, Pancholi V, Chaudhari GP, Srivastava D, Dey GK, Jha SK, Saibaba N. Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy Materials Science Forum. 890: 319-322. DOI: 10.4028/Www.Scientific.Net/Msf.890.319 |
0.513 |
|
2017 |
Saxena KK, Jha SK, Pancholi V, Chaudhari GP, Srivastava D, Dey GK, Saibaba N. Role of activation energies of individual phases in two-phase range on constitutive equation of Zr–2.5Nb–0.5Cu alloy Transactions of Nonferrous Metals Society of China. 27: 172-183. DOI: 10.1016/S1003-6326(17)60020-7 |
0.342 |
|
2017 |
Srivastava N, Chaudhari GP, Qian M. Grain refinement of binary Al-Si, Al-Cu and Al-Ni alloys by ultrasonication Journal of Materials Processing Technology. 249: 367-378. DOI: 10.1016/J.Jmatprotec.2017.06.024 |
0.456 |
|
2017 |
Saxena KK, Pancholi V, Jha SK, Chaudhari GP, Srivastava D, Dey GK. A novel approach to understand the deformation behavior in two phase region using processing map Journal of Alloys and Compounds. 706: 511-519. DOI: 10.1016/J.Jallcom.2017.02.177 |
0.405 |
|
2017 |
Khandelwal A, Mani K, Srivastava N, Gupta R, Chaudhari GP. Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting Composites Part B-Engineering. 123: 64-73. DOI: 10.1016/J.Compositesb.2017.05.007 |
0.43 |
|
2016 |
Muley SV, Vidvans AN, Chaudhari GP, Udainiya S. An assessment of ultra fine grained 316L stainless steel for implant applications. Acta Biomaterialia. 30: 408-19. PMID 26518104 DOI: 10.1016/J.Actbio.2015.10.043 |
0.492 |
|
2016 |
Chaudhari GP. Corrosion of nanostructured and ultrafine-grained metallic implant materials Materials Technology. 31: 812-817. DOI: 10.1080/10667857.2016.1242199 |
0.354 |
|
2016 |
Kishor B, Chaudhari GP, Nath SK. Slurry erosion of thermo-mechanically processed 13Cr4Ni stainless steel Tribology International. 93: 50-57. DOI: 10.1016/J.Triboint.2015.08.048 |
0.482 |
|
2016 |
Das S, Roy SB, Chaudhari GP, Daniel BSS. Microstructural evolution of as-cast Th-U alloys Progress in Nuclear Energy. 88: 285-296. DOI: 10.1016/J.Pnucene.2016.01.003 |
0.504 |
|
2016 |
Srivastava N, Chaudhari GP. Strengthening in Al alloy nano composites fabricated by ultrasound assisted solidification technique Materials Science and Engineering A. 651: 241-247. DOI: 10.1016/J.Msea.2015.10.118 |
0.522 |
|
2016 |
Das S, Kaity S, Kumar R, Banerjee J, Roy SB, Chaudhari GP, Daniel BSS. Characterization of microstructural, mechanical and thermophysical properties of Th-52U alloy Journal of Nuclear Materials. 480: 223-234. DOI: 10.1016/J.Jnucmat.2016.08.021 |
0.468 |
|
2016 |
Rajput SK, Chaudhari GP, Nath SK. Characterization of hot deformation behavior of a low carbon steel using processing maps, constitutive equations and Zener-Hollomon parameter Journal of Materials Processing Technology. 237: 113-125. DOI: 10.1016/J.Jmatprotec.2016.06.008 |
0.442 |
|
2016 |
Saxena KK, Sonkar S, Pancholi V, Chaudhari GP, Srivastava D, Dey GK, Jha SK, Saibaba N. Hot deformation behavior of Zr-2.5Nb alloy: A comparative study using different materials models Journal of Alloys and Compounds. 662: 94-101. DOI: 10.1016/J.Jallcom.2015.11.183 |
0.506 |
|
2016 |
Mehta Y, Dabhade VV, Chaudhari GP. Effect of Silicon and Nitrogen on the Microstructure and Mechanical Behavior of High-Phosphorous Steels Metallography, Microstructure, and Analysis. 5: 384-391. DOI: 10.1007/S13632-016-0298-5 |
0.48 |
|
2016 |
Kishor B, Chaudhari GP, Nath SK. Hot Deformation Characteristics of 13Cr-4Ni Stainless Steel Using Constitutive Equation and Processing Map Journal of Materials Engineering and Performance. 25: 2651-2660. DOI: 10.1007/S11665-016-2159-4 |
0.443 |
|
2016 |
Mehta Y, Rajput SK, Dabhade VV, Chaudhari GP. Physical Simulation of Hot Deformation and Microstructural Evolution of Fe-0.05C-0.13P Steel Journal of Materials Engineering and Performance. 25: 1376-1383. DOI: 10.1007/S11665-016-1992-9 |
0.51 |
|
2015 |
Yadav SD, Bhingole PP, Chaudhari GP, Nath SK, Sommitsch C. Hybrid processing of AZ91 magnesium alloy/nano-Al2O3 composites Key Engineering Materials. 651: 783-788. DOI: 10.4028/Www.Scientific.Net/Kem.651-653.783 |
0.524 |
|
2015 |
Das S, Kumar R, Kaity S, Neogy S, Hareendran KN, Roy SB, Dey GK, Daniel BSS, Chaudhari GP. Characterization of microstructural, mechanical and thermal properties and ageing study of Th-3 wt.% U alloy Nuclear Engineering and Design. 282: 116-125. DOI: 10.1016/J.Nucengdes.2014.11.023 |
0.473 |
|
2015 |
Mehta Y, Dabhade VV, Chaudhari GP. Metallography of Fe–P–C and Fe–P–C–Si–N Alloys Metallography, Microstructure, and Analysis. 4: 488-496. DOI: 10.1007/S13632-015-0233-1 |
0.409 |
|
2015 |
Kishor B, Chaudhari GP, Nath SK. Hot deformation behaviour of 16Cr-5Ni martensitic stainless steel Materials Science and Technology Conference and Exhibition 2015, Ms and T 2015. 1: 909-916. |
0.396 |
|
2014 |
Kishor B, Chaudhari GP, Nath SK. Cavitation erosion of thermomechanically processed 13/4 martensitic stainless steel Wear. 319: 150-159. DOI: 10.1016/J.Wear.2014.07.024 |
0.493 |
|
2014 |
Agarwal N, Chaudhari GP, Nath SK. Slurry and cavitation erosion of HSLA steel processed by warm multidirectional forging and inter-critical annealing Tribology International. 70: 18-25. DOI: 10.1016/J.Triboint.2013.09.017 |
0.473 |
|
2014 |
Saxena KK, Yadav SD, Sonkar S, Pancholi V, Chaudhari GP, Srivastava D, Dey GK, Jha SK, Saibaba N. Effect of Temperature and Strain Rate on Deformation Behavior of Zirconium Alloy: Zr-2.5Nb Procedia Materials Science. 6: 278-283. DOI: 10.1016/J.Mspro.2014.07.035 |
0.384 |
|
2014 |
Kumar H, Chaudhari GP. Creep behavior of AS41 alloy matrix nano-composites Materials Science and Engineering A. 607: 435-444. DOI: 10.1016/J.Msea.2014.04.020 |
0.473 |
|
2014 |
Muley SV, Singh SP, Sinha P, Bhingole PP, Chaudhari GP. Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behavior Materials and Design. 53: 475-481. DOI: 10.1016/J.Matdes.2013.07.056 |
0.467 |
|
2014 |
Bhingole PP, Chaudhari GP, Nath SK. Processing, microstructure and properties of ultrasonically processed in situ MgO-Al2O3-MgAl2O4 dispersed magnesium alloy composites Composites Part a: Applied Science and Manufacturing. 66: 209-217. DOI: 10.1016/J.Compositesa.2014.08.001 |
0.476 |
|
2014 |
Rajput SK, Chaudhari GP, Nath SK. Physical simulation of hot deformation of low-carbon Ti-Nb microalloyed steel and microstructural studies Journal of Materials Engineering and Performance. 23: 2930-2942. DOI: 10.1007/S11665-014-1059-8 |
0.456 |
|
2013 |
Amarendra HJ, Chaudhari GP, Nath SK. Cavitation and slurry erosion of aluminum in the slurry pot tester Materials Science Forum. 736: 218-222. DOI: 10.4028/Www.Scientific.Net/Msf.736.218 |
0.314 |
|
2013 |
Rajput SK, Dikovits M, Chaudhari GP, Poletti C, Warchomicka F, Pancholi V, Nath SK. Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps Materials Science and Engineering A. 587: 291-300. DOI: 10.1016/J.Msea.2013.08.057 |
0.475 |
|
2012 |
Amarendra HJ, Kalhan P, Chaudhari GP, Nath SK, Kumar S. Slurry erosion response of heat treated 13cr-4ni martensitic stainless steel Materials Science Forum. 710: 500-505. DOI: 10.4028/Www.Scientific.Net/Msf.710.500 |
0.367 |
|
2012 |
Bhingole P, Chaudhari G. Effect of Ultrasonic Treatment on the Grain Refinement and Mechanical Properties of AZ91 Magnesium Alloy Materials Science Forum. 710: 463-468. DOI: 10.4028/Www.Scientific.Net/Msf.710.463 |
0.468 |
|
2012 |
Padap AK, Chaudhari GP, Nath SK. Ultrafine-grained HSLA steel processed using MAF: Dry sliding wear and corrosion behaviour Materials Science Forum. 710: 276-281. DOI: 10.4028/Www.Scientific.Net/Msf.710.276 |
0.5 |
|
2012 |
Bhingole PP, Patel B, Chaudhari GP. Ultrasonic processing and microstructural analysis of AZ91 magnesium alloy Materials Science Forum. 702: 975-978. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.975 |
0.454 |
|
2012 |
Joshi K, Amarendra HJ, Chaudhari GP, Nath SK. Effect of deposition parameters & molybdenum percentage on Nickel- Molybdenum alloy coatings Advanced Materials Research. 585: 493-497. DOI: 10.4028/Www.Scientific.Net/Amr.585.493 |
0.397 |
|
2012 |
Nayaka HS, Chaudhari GP, Daniel BSS. Grain growth kinetics of accumulative roll bonded AZ61 alloy Advanced Materials Research. 585: 387-391. DOI: 10.4028/Www.Scientific.Net/Amr.585.387 |
0.452 |
|
2012 |
Kumar S, Chaudhari GP, Nath SK, Basu B. Effect of preheat temperature on weldability of martensitic stainless steel Materials and Manufacturing Processes. 27: 1382-1386. DOI: 10.1080/10426914.2012.700150 |
0.314 |
|
2012 |
Amarendra HJ, Chaudhari GP, Nath SK. Synergy of cavitation and slurry erosion in the slurry pot tester Wear. 290: 25-31. DOI: 10.1016/J.Wear.2012.05.025 |
0.303 |
|
2012 |
Bhingole PP, Chaudhari GP. Synergy of nano carbon black inoculation and high intensity ultrasonic processing in cast magnesium alloys Materials Science and Engineering A. 556: 954-961. DOI: 10.1016/J.Msea.2012.07.104 |
0.437 |
|
2012 |
Patel B, Chaudhari GP, Bhingole PP. Microstructural evolution in ultrasonicated AS41 magnesium alloy Materials Letters. 66: 335-338. DOI: 10.1016/J.Matlet.2011.08.113 |
0.497 |
|
2012 |
Padap AK, Chaudhari GP, Pancholi V, Nath SK. Microstructural evolution and mechanical behavior of warm multi-axially forged HSLA steel Journal of Materials Science. 47: 7894-7900. DOI: 10.1007/S10853-012-6477-0 |
0.494 |
|
2012 |
Dikovits M, Poletti C, Warchomicka F, Chaudhari GP, Pancholi V. Hot Deformation Study by Processing Maps of N Containing Microalloyed Steel Characterization of Minerals, Metals, and Materials. 503-510. DOI: 10.1002/9781118371305.ch58 |
0.379 |
|
2012 |
Singh AK, Nath SK, Bhardwaj M, Pancholi V, Chaudhari GP. Microstructural studies on thermomechanically processed plain carbon dual phase steel Tms Annual Meeting. 2: 659-665. |
0.376 |
|
2011 |
Chaudhari GP, Padap AK, Behera S, Nath SK. Processing, microstructure and corrosion behaviour of multi-axially forged low carbon steels Corrosion Engineering Science and Technology. 46: 392-399. DOI: 10.1179/147842209X12464471864493 |
0.486 |
|
2011 |
Bhagavathi LR, Chaudhari GP, Nath SK. Mechanical and corrosion behavior of plain low carbon dual-phase steels Materials and Design. 32: 433-440. DOI: 10.1016/J.Matdes.2010.06.025 |
0.433 |
|
2011 |
Padap AK, Chaudhari GP, Nath SK. Dry sliding wear and corrosion behavior of ultrafine-grained HSLA steel processed using multi axial forging Tms Annual Meeting. 2: 137-145. DOI: 10.1002/9781118062142.ch17 |
0.405 |
|
2010 |
Padap AK, Chaudhari GP, Pancholi V, Nath SK. Warm multiaxial forging of AISI 1016 steel Materials and Design. 31: 3816-3824. DOI: 10.1016/J.Matdes.2010.03.030 |
0.485 |
|
2010 |
Chaudhari GP, Acoff VL. Titanium aluminide sheets made using roll bonding and reaction annealing Intermetallics. 18: 472-478. DOI: 10.1016/J.Intermet.2009.09.008 |
0.738 |
|
2010 |
Nath SK, Chaudhari GP, Singla M. Effect of thermomechanical treatment on the microstructure and mechanical properties of an if steel Journal of Materials Engineering and Performance. 19: 1325-1329. DOI: 10.1007/S11665-010-9639-8 |
0.453 |
|
2010 |
Padap AK, Chaudhari GP, Nath SK. Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multiaxial forging Journal of Materials Science. 45: 4837-4845. DOI: 10.1007/S10853-010-4430-7 |
0.509 |
|
2010 |
Nayaka HS, Daniel BSS, Chaudhari GP. Accumulative roll bonding of wrought magnesium alloy Magnesium Technology. 593-597. |
0.47 |
|
2010 |
Padap AK, Chaudhari GP, Nath SK. Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multi axial forging Tms Annual Meeting. 2: 757-764. |
0.437 |
|
2009 |
Padap AK, Chaudhari GP, Nath SK, Pancholi V. Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties Materials Science and Engineering A. 527: 110-117. DOI: 10.1016/J.Msea.2009.08.066 |
0.495 |
|
2009 |
Chaudhari GP, Acoff V. Cold roll bonding of multi-layered bi-metal laminate composites Composites Science and Technology. 69: 1667-1675. DOI: 10.1016/J.Compscitech.2009.03.018 |
0.665 |
|
2009 |
Padap AK, Chaudhari GP, Nath SK, Pancholi V. EBSD analysis of warm multiaxially forged mild steel Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 2: 1008-1018. |
0.341 |
|
2005 |
Chaudhari GP, Acoff VL. Processing of gamma titanium aluminide sheets using rolling and reactive synthesis Mpmd Sixth Global Innovations Proceedings - Trends in Materials and Manufacturing Technologies For Transportation Industries and Powder Metall. Research and Development in the Transportation Industry. 199-204. |
0.672 |
|
2005 |
Acoff VL, Zhang R, Chaudhari GP. Using severe plastic deformation to process multilayered composites from elemental titanium, aluminum, and niobium foils Materials Forum. 29: 568-573. |
0.715 |
|
2004 |
Serin K, Chaudhari GP, Acoff VL. Investigation of microstructural evolution of cold roll bonded and annealed Ti-Al multilayered sheets Proceedings of the Tms Fall Extraction and Processing Conference. 2004: 321-326. |
0.675 |
|
2004 |
Chaudhari GP, Acoff VL. The effect of rolling strain on the processing of intermetallic sheet materials using roll welding and reaction annealing Asm Conference Proceedings: Joining of Advanced and Specialty Materials. 40-44. |
0.718 |
|
2004 |
Chaudhari GP, Serin K, Acoff VL. Processing ultrafine grained composites of elemental titanium and aluminum by severe plastic deformation Ultrafine Grained Materials Iii. 451-456. |
0.712 |
|
2003 |
Acoff VL, Chaudhari G. Processing intermetallic sheet materials from elemental foils using cold roll bonding and reaction annealing Materials Science Forum. 426: 1873-1878. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.1873 |
0.723 |
|
2003 |
Chaudhari GP, Acoff VL. Effect of rolling strain on the processing of gamma titanium aluminides by roll bonding and reaction annealing Gamma Titanium Aluminides 2003. 287-290. |
0.712 |
|
Show low-probability matches. |