Year |
Citation |
Score |
2020 |
Toor IU, Alashwan Z, Badr HM, Ben-Mansour R, Shirazi SA. Effect of Jet Impingement Velocity and Angle on CO Erosion-Corrosion with and without Sand for API 5L-X65 Carbon Steel. Materials (Basel, Switzerland). 13. PMID 32403339 DOI: 10.3390/Ma13092198 |
0.475 |
|
2020 |
Sedrez TA, Shirazi SA. Erosion Of Elbows In Series For Liquid-Dominated Multiphase Flows: A Cfd And Experimental Analysis Multiphase Science and Technology. 32: 1-23. DOI: 10.1615/Multscientechn.2020031538 |
0.611 |
|
2020 |
Asgharpour A, Zahedi P, Khanouki HA, Shirazi SA, McLaury BS. Experimental Investigation of Solid Particle Erosion in Successive Elbows in Gas Dominated Flows Journal of Fluids Engineering-Transactions of the Asme. 142. DOI: 10.1115/1.4046109 |
0.586 |
|
2020 |
Pouraria H, Darihaki F, Park KH, Shirazi SA, Seo Y. CFD modelling of the influence of particle loading on erosion using dense discrete particle model Wear. 203450. DOI: 10.1016/J.Wear.2020.203450 |
0.528 |
|
2019 |
Zahedi P, Parsi M, Asgharpour A, McLaury BS, Shirazi SA. Experimental investigation of sand particle erosion in a 90° elbow in annular two-phase flows Wear. 203048. DOI: 10.1016/J.Wear.2019.203048 |
0.672 |
|
2019 |
Zhang J, Darihaki F, Shirazi SA. A comprehensive CFD-based erosion prediction for sharp bend geometry with examination of grid effect Wear. 191-201. DOI: 10.1016/J.Wear.2019.04.029 |
0.461 |
|
2019 |
Darihaki F, Zhang J, Shirazi SA. Solid particle erosion in gradual contraction geometry for a gas-solid system Wear. 643-651. DOI: 10.1016/J.Wear.2019.01.106 |
0.571 |
|
2019 |
Sedrez TA, Shirazi SA, Rajkumar YR, Sambath K, Subramani HJ. Experiments and CFD simulations of erosion of a 90° elbow in liquid-dominated liquid-solid and dispersed-bubble-solid flows Wear. 570-580. DOI: 10.1016/J.Wear.2019.01.015 |
0.679 |
|
2019 |
Wang Z, Zhang J, Shirazi SA, Dou Y. Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid Wear. 1-8. DOI: 10.1016/J.Wear.2018.12.080 |
0.451 |
|
2019 |
Wang Z, Zhang J, Shirazi SA, Dou Y. Predicting erosion in a non-Newtonian shear-thinning jet flow with validated CFD models from PIV and PTV measurements Wear. 501-506. DOI: 10.1016/J.Wear.2018.12.027 |
0.531 |
|
2019 |
Chochua GG, Shirazi SA. A combined CFD-experimental study of erosion wear life prediction for non-Newtonian viscous slurries Wear. 481-490. DOI: 10.1016/J.Wear.2018.12.003 |
0.463 |
|
2019 |
Feng Q, Yan B, Chen P, Shirazi SA. Failure analysis and simulation model of pinhole corrosion of the refined oil pipeline Engineering Failure Analysis. 106: 104177. DOI: 10.1016/J.Engfailanal.2019.104177 |
0.361 |
|
2018 |
Zhang J, McLaury BS, Shirazi SA. Modeling sand fines erosion in elbows mounted in series Wear. 196-206. DOI: 10.1016/J.Wear.2018.02.009 |
0.409 |
|
2018 |
Zhang J, McLaury BS, Shirazi SA. Application and experimental validation of a CFD based erosion prediction procedure for jet impingement geometry Wear. 11-19. DOI: 10.1016/J.Wear.2017.10.001 |
0.467 |
|
2018 |
Zahedi P, Parvandeh S, Asgharpour A, McLaury BS, Shirazi SA, McKinney BA. Random forest regression prediction of solid particle Erosion in elbows Powder Technology. 338: 983-992. DOI: 10.1016/J.Powtec.2018.07.055 |
0.488 |
|
2018 |
Lin N, Arabnejad H, Shirazi SA, McLaury BS, Lan H. Experimental study of particle size, shape and particle flow rate on Erosion of stainless steel Powder Technology. 336: 70-79. DOI: 10.1016/J.Powtec.2018.05.039 |
0.432 |
|
2017 |
Parsi M, Al-Sarkhi A, Kara M, Sharma P, McLaury BS, Shirazi SA. A new dimensionless number for solid particle erosion in natural gas elbows Wear. 80-83. DOI: 10.1016/J.Wear.2017.07.005 |
0.495 |
|
2017 |
Vieira RE, Parsi M, Zahedi P, McLaury BS, Shirazi SA. Electrical resistance probe measurements of solid particle erosion in multiphase annular flow Wear. 382: 15-28. DOI: 10.1016/J.Wear.2017.04.005 |
0.839 |
|
2017 |
Haider G, Arabnejad H, Shirazi SA, Mclaury BS. A mechanistic model for stochastic rebound of solid particles with application to erosion predictions Wear. 615-624. DOI: 10.1016/J.Wear.2017.02.015 |
0.428 |
|
2017 |
Zahedi P, Zhang J, Arabnejad H, McLaury BS, Shirazi SA. CFD simulation of multiphase flows and erosion predictions under annular flow and low liquid loading conditions Wear. 1260-1270. DOI: 10.1016/J.Wear.2017.01.111 |
0.667 |
|
2017 |
Arabnejad H, Mansouri A, Shirazi SA, McLaury BS. Abrasion erosion modeling in particulate flow Wear. 1194-1199. DOI: 10.1016/J.Wear.2017.01.042 |
0.498 |
|
2017 |
Parsi M, Kara M, Agrawal M, Kesana N, Jatale A, Sharma P, Shirazi S. CFD simulation of sand particle erosion under multiphase flow conditions Wear. 1176-1184. DOI: 10.1016/J.Wear.2016.12.021 |
0.839 |
|
2017 |
Karimi S, Shirazi SA, McLaury BS. Predicting fine particle erosion utilizing computational fluid dynamics Wear. 1130-1137. DOI: 10.1016/J.Wear.2016.11.022 |
0.512 |
|
2017 |
Vieira RE, Parsi M, Zahedi P, McLaury BS, Shirazi SA. Sand erosion measurements under multiphase annular flow conditions in a horizontal-horizontal elbow Powder Technology. 320: 625-636. DOI: 10.1016/J.Powtec.2017.07.087 |
0.85 |
|
2017 |
Kesana NR, Parsi M, Vieira RE, Azzopardi B, Schleicher E, McLaury BS, Shirazi SA, Hampel U. Visualization of gas-liquid multiphase pseudo-slug flow using Wire-Mesh Sensor Journal of Natural Gas Science and Engineering. 46: 477-490. DOI: 10.1016/J.Jngse.2017.08.010 |
0.849 |
|
2017 |
Parsi M, Azzopardi BJ, Al-Sarkhi A, Kesana NR, Vieira RE, Torres CF, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Do huge waves exist in horizontal gas-liquid pipe flow? International Journal of Multiphase Flow. 96: 1-23. DOI: 10.1016/J.Ijmultiphaseflow.2017.06.007 |
0.863 |
|
2017 |
Vieira RE, Parsi M, Zahedi P, McLaury BS, Shirazi SA. Ultrasonic measurements of sand particle erosion under upward multiphase annular flow conditions in a vertical-horizontal bend International Journal of Multiphase Flow. 93: 48-62. DOI: 10.1016/J.Ijmultiphaseflow.2017.02.010 |
0.866 |
|
2016 |
Najmi K, McLaury BS, Shirazi SA, Cremaschi S. The effect of viscosity on low concentration particle transport in single-phase (Liquid) Horizontal pipes Journal of Energy Resources Technology, Transactions of the Asme. 138. DOI: 10.1115/1.4032227 |
0.462 |
|
2016 |
Vieira RE, Mansouri A, McLaury BS, Shirazi SA. Experimental and computational study of erosion in elbows due to sand particles in air flow Powder Technology. 288: 339-353. DOI: 10.1016/J.Powtec.2015.11.028 |
0.828 |
|
2016 |
Parsi M, Agrawal M, Srinivasan V, Vieira RE, Torres CF, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Assessment of a hybrid CFD model for simulation of complex vertical upward gas-liquid churn flow Chemical Engineering Research and Design. 105: 71-84. DOI: 10.1016/J.Cherd.2015.10.044 |
0.852 |
|
2016 |
Najmi K, McLaury BS, Shirazi SA, Cremaschi S. Low concentration sand transport in multiphase viscous horizontal pipes: An experimental study and modeling guideline Aiche Journal. 62: 1821-1833. DOI: 10.1002/Aic.15131 |
0.617 |
|
2016 |
Zahedi P, Vieira RE, Shirazi SA, Mclaury BS. Liquid film thickness and erosion of elbows in gas-liquid annular flow Nace - International Corrosion Conference Series. 5: 3856-3870. |
0.808 |
|
2015 |
Najmi K, McLaury BS, Shirazi SA, Cremaschi S. Very low concentration sand transport in multiphase horizontal pipelines - An experimental study and modeling guidelines Proceedings of the International Conference On Offshore Mechanics and Arctic Engineering - Omae. 5. DOI: 10.1115/OMAE201541232 |
0.532 |
|
2015 |
Najmi K, Hill AL, McLaury BS, Shirazi SA, Cremaschi S. Experimental study of low concentration sand transport in multiphase air-water horizontal pipelines Journal of Energy Resources Technology, Transactions of the Asme. 137. DOI: 10.1115/1.4029602 |
0.576 |
|
2015 |
Mansouri A, Arabnejad H, Karimi S, Shirazi SA, McLaury BS. Improved CFD modeling and validation of erosion damage due to fine sand particles Wear. 338: 339-350. DOI: 10.1016/J.Wear.2015.07.011 |
0.472 |
|
2015 |
Parsi M, Vieira RE, Kesana N, McLaury BS, Shirazi SA. Ultrasonic measurements of sand particle erosion in gas dominant multiphase churn flow in vertical pipes Wear. 328: 1-13. DOI: 10.1016/J.Wear.2015.03.013 |
0.867 |
|
2015 |
Arabnejad H, Mansouri A, Shirazi SA, McLaury BS. Development of mechanistic erosion equation for solid particles Wear. 332: 1044-1050. DOI: 10.1016/J.Wear.2015.01.031 |
0.393 |
|
2015 |
Arabnejad H, Shirazi SA, McLaury BS, Subramani HJ, Rhyne LD. The effect of erodent particle hardness on the erosion of stainless steel Wear. 332: 1098-1103. DOI: 10.1016/J.Wear.2015.01.017 |
0.362 |
|
2015 |
Parsi M, Agrawal M, Srinivasan V, Vieira RE, Torres CF, McLaury BS, Shirazi SA. CFD simulation of sand particle erosion in gas-dominant multiphase flow Journal of Natural Gas Science and Engineering. DOI: 10.1016/J.Jngse.2015.09.003 |
0.851 |
|
2015 |
Najmi K, McLaury BS, Shirazi SA, Cremaschi S. Experimental study of low concentration sand transport in wet gas flow regime in horizontal pipes Journal of Natural Gas Science and Engineering. 24: 80-88. DOI: 10.1016/J.Jngse.2015.03.018 |
0.634 |
|
2015 |
Parsi M, Vieira RE, Torres CF, Kesana NR, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Experimental investigation of interfacial structures within churn flow using a dual wire-mesh sensor International Journal of Multiphase Flow. 73: 155-170. DOI: 10.1016/J.Ijmultiphaseflow.2015.03.019 |
0.871 |
|
2015 |
Vieira RE, Parsi M, Torres CF, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Experimental characterization of vertical gas-liquid pipe flow for annular and liquid loading conditions using dual Wire-Mesh Sensor Experimental Thermal and Fluid Science. 64: 81-93. DOI: 10.1016/J.Expthermflusci.2015.02.007 |
0.858 |
|
2015 |
Vieira RE, Parsi M, McLaury BS, Shirazi SA, Torres CF, Schleicher E, Hampel U. Experimental characterization of vertical downward two-phase annular flows using Wire-Mesh Sensor Chemical Engineering Science. 134: 324-339. DOI: 10.1016/J.Ces.2015.05.013 |
0.845 |
|
2015 |
Parsi M, Vieira RE, Torres CF, Kesana NR, McLaury BS, Shirazi SA, Schleicher E, Hampel U. On the effect of liquid viscosity on interfacial structures within churn flow: Experimental study using wire mesh sensor Chemical Engineering Science. 130: 221-238. DOI: 10.1016/J.Ces.2015.03.033 |
0.86 |
|
2015 |
Najmi K, McLaury BS, Shirazi SA, Hill AL, Cremaschi S. A generalized model to predict minimum particle transport velocities in multiphase air-water horizontal pipes Aiche Journal. 61: 2634-2646. DOI: 10.1002/Aic.14824 |
0.552 |
|
2015 |
Mansouri A, Mahdavi M, Shirazi SA, McLaury BS. Investigating the effect of sand concentration on erosion rate in slurry flows Nace - International Corrosion Conference Series. 2015. |
0.407 |
|
2015 |
Vieira RE, Sajeev S, Shirazi SA, McLaury BS, Kouba G. Experiments and modelling of sand erosion in Gas-Liquid Cylindrical Cyclone separators under gas production and low-liquid loading conditions Bhr Group - 17th International Conference On Multiphase Technology 2015. 415-430. |
0.825 |
|
2015 |
Parsi M, Vieira R, Sajeev SK, McLaury BS, Shirazi SA. Experimental study of erosion in vertical slug/churn flow Nace - International Corrosion Conference Series. 2015. |
0.583 |
|
2015 |
Vieira RE, Parsi M, Kesana NR, Shirazi SA, McLaury BS. Effects of flow pattern and flow orientation on sand erosion in elbows for multiphase flow conditions Nace - International Corrosion Conference Series. 2015. |
0.883 |
|
2015 |
Hall AM, Keller MW, Roberts KP, Shirazi SA, Iski EV, Rybicki EF, Shadley JR. A 3-cell flow loop test facility for the simultaneous evaluation of erosion, corrosion, and erosion-corrosion Nace - International Corrosion Conference Series. 2015. |
0.338 |
|
2015 |
Parsi M, Vieira RE, Agrawal M, Srinivasan V, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Computational fluid dynamics (CFD) simulation of multiphase flow and validating using wire mesh sensor Bhr Group - 17th International Conference On Multiphase Technology 2015. 197-212. |
0.844 |
|
2014 |
Hashemian Y, Yu M, Miska S, Shirazi S, Ahmed R. Accurate Predictions of Velocity Profiles and Frictional Pressure Losses in Annular YPL-Fluid Flow Journal of Canadian Petroleum Technology. 53: 355-363. DOI: 10.2118/173181-Pa |
0.499 |
|
2014 |
Vieira RE, Parsi M, Torres CF, Shirazi SA, McLaury BS, Schleicher E, Hampel U. Experimental study of vertical gas-liquid pipe flow for annular and liquid loading conditions using dual wire-mesh sensors American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 2. DOI: 10.1115/FEDSM2014-21849 |
0.808 |
|
2014 |
Parsi M, Vieira RE, Torres CF, Kesana NR, McLaury BS, Shirazi SA, Hampel U, Schleicher E. Characterizing slug/churn flow using wire mesh sensor American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1. DOI: 10.1115/FEDSM2014-21678 |
0.822 |
|
2014 |
Vieira RE, Kesana NR, Torres CF, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Experimental investigation of horizontal gas-liquid stratified and annular flow using wire-mesh sensor Journal of Fluids Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4027799 |
0.867 |
|
2014 |
Kesana NR, Vieira R, McLaury BS, Shirazi SA. Experimental study of sand particle concentration profiles in straight and pipe elbow for horizontal multiphase flows Journal of Energy Resources Technology, Transactions of the Asme. 136. DOI: 10.1115/1.4026603 |
0.865 |
|
2014 |
Kesana NR, Throneberry JM, McLaury BS, Shirazi SA, Rybicki EF. Effect of particle size and liquid viscosity on erosion in annular and slug flow Journal of Energy Resources Technology, Transactions of the Asme. 136. DOI: 10.1115/1.4024857 |
0.832 |
|
2014 |
Mansouri A, Arabnejad H, Shirazi SA, McLaury BS. A combined CFD/experimental methodology for erosion prediction Wear. DOI: 10.1016/J.Wear.2014.11.025 |
0.475 |
|
2014 |
Parsi M, Najmi K, Najafifard F, Hassani S, McLaury BS, Shirazi SA. A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications Journal of Natural Gas Science and Engineering. 21: 850-873. DOI: 10.1016/J.Jngse.2014.10.001 |
0.698 |
|
2014 |
Vieira RE, Kesana NR, McLaury BS, Shirazi SA, Torres CF, Schleicher E, Hampel U. Experimental investigation of the effect of 90° standard elbow on horizontal gas-liquid stratified and annular flow characteristics using dual wire-mesh sensors Experimental Thermal and Fluid Science. 59: 72-87. DOI: 10.1016/J.Expthermflusci.2014.08.001 |
0.865 |
|
2014 |
Najmi K, McLaury BS, Shirazi SA, Cremaschi S. Experimental study of low concentration sand transport in low liquid loading water-airflow in horizontal pipes Bhr Group - 9th North American Conference On Multiphase Technology 2014. 17-27. |
0.545 |
|
2014 |
Arabnejad H, Shirazi SA, Mclaury BS, Shadley JR. A guideline to calculate erosional velocity due to liquid droplets for oil and gas industry Proceedings - Spe Annual Technical Conference and Exhibition. 7: 4882-4893. |
0.311 |
|
2014 |
Vieira RE, Kesana NR, Shirazi SA, McLaury BS. Experiments for sand erosion model improvement for elbows in gas production, low-liquid loading and annular flow conditions Nace - International Corrosion Conference Series. |
0.872 |
|
2014 |
Al-Aithan GH, Al-Mutahar FM, Shadley JR, Shirazi SA, Rybicki EF, Roberts KP. A mechanistic erosion-corrosion model for predicting iron carbonate (FeCO3) scale thickness in a CO2 environment with sand Nace - International Corrosion Conference Series. |
0.806 |
|
2013 |
Hassani S, Roberts KP, Shirazi SA, Rybicki EF, Shadley JR, Joia C. A new approach for predicting inhibited erosion-corrosion in CO 2-saturated oil/brine flow condition Spe Production and Operations. 28: 135-144. DOI: 10.2118/155136-Pa |
0.679 |
|
2013 |
Kesana NR, Vieira R, Schleicher E, McLaury BS, Shirazi SA, Hampel U. Experimental investigation of slug characteristics through a standard pipe bend Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7. DOI: 10.1115/IMECE2013-62896 |
0.748 |
|
2013 |
Najmi K, Shirazi SA, Cremaschi S, McLaury B. A generalized model for predicting critical deposition velocity for particle entrained in horizontal liquid and gas pipe flows American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1. DOI: 10.1115/FEDSM2013-16251 |
0.542 |
|
2013 |
Kesana NR, Vieira R, Schleicher E, McLaury BS, Shirazi SA, Hampel U. Experimental study of slug characteristics - Implications to sand erosion American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1. DOI: 10.1115/FEDSM2013-16165 |
0.75 |
|
2013 |
Vieira RE, Kesana NR, Torres CF, McLaury BS, Shirazi SA, Schleicher E, Hampel U. Experimental investigation of horizontal gas-liquid stratified and annular flow using wire mesh sensor American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1. DOI: 10.1115/FEDSM2013-16117 |
0.851 |
|
2013 |
Kesana NR, Grubb SA, Mclaury BS, Shirazi SA. Ultrasonic measurement of multiphase flow erosion patterns in a standard elbow Journal of Energy Resources Technology, Transactions of the Asme. 135. DOI: 10.1115/1.4023331 |
0.853 |
|
2013 |
Al-Mutahar FM, Al-Aithan G, Roberts KP, Shirazi SA, Rybicki EF, Shadley JR. Characterization of erosion resistance of iron carbonate (FeCO3) scale Nace - International Corrosion Conference Series. |
0.78 |
|
2012 |
Hassani S, Roberts KP, Shirazi SA, Shadley JR, Rybicki EF, Joia C. Flow loop study of NaCl concentration effect on erosion, corrosion, and erosion-corrosion of carbon steel in CO 2-saturated systems Corrosion. 68. DOI: 10.5006/1.3683229 |
0.369 |
|
2012 |
Hassani S, Roberts KP, Shirazi SA, Shadley JR, Rybicki EF, Joia C. Characterization and prediction of chemical inhibition performance for erosion-corrosion conditions in sweet oil and gas production Corrosion. 68: 885-896. DOI: 10.5006/0546 |
0.402 |
|
2012 |
Vieira RE, Kesana NR, McLaury BS, Shirazi SA. Sand erosion in multiphase flow for low-liquid loading and annular conditions Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 2445-2454. DOI: 10.1115/IMECE2012-86425 |
0.874 |
|
2012 |
Kesana NR, Throneberry JM, McLaury BS, Shirazi SA, Rybicki EF. Effect of particle size and viscosity on erosion in annular and slug flow Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 2143-2154. DOI: 10.1115/IMECE2012-86035 |
0.848 |
|
2012 |
Okita R, Zhang Y, McLaury BS, Shirazi SA. Experimental and computational investigations to evaluate the effects of fluid viscosity and particle size on erosion damage Journal of Fluids Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4005683 |
0.435 |
|
2012 |
Odigie ME, McLaury BS, Shirazi SA, Cremaschi S. Acoustic monitor threshold limits for sand detection in multiphase flow production system Society of Petroleum Engineers - Spe International Conference and Exhibition On Oilfield Corrosion 2012. 62-74. |
0.58 |
|
2012 |
Shirazi SA, McLaury BS, Husen AA, Venkatesan K, Nadeem A, Hassaballa SA. Challenges of integrity management of pipelines and erosion control in sand producing wells Society of Petroleum Engineers - Spe International Conference and Exhibition On Oilfield Corrosion 2012. 172-187. |
0.312 |
|
2012 |
Al-Mutahar FM, Roberts KP, Shirazi SA, Rybicki EF, Shadley JR. Modeling and experiments of FeCO 3 scale growth and removal for erosion-corrosion conditions Nace - International Corrosion Conference Series. 1: 683-701. |
0.813 |
|
2012 |
Kesana NR, Grubb SA, McLaury BS, Shirazi SA. UT measurements to determine erosion patterns in a bend for single and multiphase flows Nace - International Corrosion Conference Series. 4: 3396-3411. |
0.863 |
|
2012 |
Fan C, McLaury BS, Shirazi SA, Rybicki EF. Experimental research of sand erosion in gas dominant flows Nace - International Corrosion Conference Series. 4: 3369-3383. |
0.59 |
|
2011 |
Okita R, Zhang Y, McLaury BS, Shirazi SA, Rybicki EF. Effects of viscosity, particle size, and particle shape on erosion in gas and liquid flows Asme-Jsme-Ksme 2011 Joint Fluids Engineering Conference, Ajk 2011. 1: 2389-2398. DOI: 10.1115/AJK2011-09023 |
0.401 |
|
2011 |
McLaury BS, Shirazi SA, Viswanathan V, Mazumder QH, Santos G. Distribution of sand particles in horizontal and vertical annular multiphase flow in pipes and the effects on sand erosion Journal of Energy Resources Technology, Transactions of the Asme. 133. DOI: 10.1115/1.4004264 |
0.823 |
|
2011 |
Fan C, McLaury BS, Shirazi SA. Evaluation of electrical resistance probes to detect pipeline erosion and sand production in low liquid loading flow conditions Spe Eastern Regional Meeting. 187-200. |
0.349 |
|
2011 |
Zhang Y, McLaury BS, Shirazi SA, Rybicki EF. Predicting sand erosion in slug flows using a two-dimensional mechanistic model Nace - International Corrosion Conference Series. |
0.444 |
|
2010 |
Miska S, Shirazi SA, McLaury BS, Zhang Y, Rybicki EF, Okita R. Particle, fluid velocity, and erosion measurements for viscous liquids in a submerged direct impingement flow American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1: 2887-2904. DOI: 10.1115/FEDSM-ICNMM2010-31269 |
0.37 |
|
2010 |
Shirazi SA, McLaury BS, Sow E, Butter M, Folefac A, Hassaballa SA. Sand settling and locations of high erosion in subsea production system Society of Petroleum Engineers - Trinidad and Tobago Energy Resources Conference 2010, Spe Tt 2010. 2: 702-711. |
0.456 |
|
2010 |
McLaury BS, Shirazi SA, Rybicki EF. Sand erosion in multiphase flow for slug and annular flow regimes Nace - International Corrosion Conference Series. |
0.621 |
|
2010 |
McLaury BS, Shirazi SA, Rybicki EF. Sand erosion in multiphase flow for slug and annular flow regimes Nace - International Corrosion Conference Series. |
0.621 |
|
2010 |
Throneberry JM, Zhang Y, McLaury BS, Shirazi SA, Rybicki EF. Solid-particle erosion in slug flow Proceedings - Spe Annual Technical Conference and Exhibition. 6: 4847-4862. |
0.603 |
|
2010 |
Zhang Y, McLaury BS, Shirazi SA, Rybicki EF. A two-dimensional mechanistic model for sand erosion prediction including particle impact characteristics Nace - International Corrosion Conference Series. |
0.425 |
|
2010 |
Zhang Y, McLaury BS, Shirazi SA, Rybicki EF. A two-dimensional mechanistic model for sand erosion prediction including particle impact characteristics Nace - International Corrosion Conference Series. |
0.425 |
|
2010 |
Okita R, Zhang Y, McLaury BS, Shirazi SA, Rybicki EF. Experimental and CFD investigations to evaluate the effects of fluid viscosity and particle size on erosion damage in oil and gas production equpiment American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1: 361-374. |
0.345 |
|
2009 |
Zhang Y, Okita R, Miska S, McLaury BS, Shirazi SA, Rybicki EF. CFD prediction and LDV validation of liquid and particle velocities in a submerged jet impinging a flat surface for different viscosities and particle sizes Proceedings of the Asme Fluids Engineering Division Summer Conference 2009, Fedsm2009. 1: 625-635. DOI: 10.1115/FEDSM2009-78333 |
0.441 |
|
2009 |
Zhang Y, McLaury BS, Shirazi SA. Improvements of particle near-wall velocity and erosion predictions using a commercial CFD code Journal of Fluids Engineering, Transactions of the Asme. 131: 0313031-0313039. DOI: 10.1115/1.3077139 |
0.404 |
|
2009 |
Tummala KC, Roberts KP, Shadley JR, Rybicki EF, Shirazi SA. Effect of sand production and flow velocity on corrosion inhibition under scale forming conditions Nace - International Corrosion Conference Series. |
0.354 |
|
2008 |
Mazumder QH, Shirazi SA, McLaury B. Experimental investigation of the location of maximum erosive wear damage in elbows Journal of Pressure Vessel Technology, Transactions of the Asme. 130: 0113031-0113037. DOI: 10.1115/1.2826426 |
0.791 |
|
2008 |
Mazumder QH, Shirazi SA, McLaury BS. Prediction of solid particle erosive wear of elbows in multiphase annular flow-model development and experimental validation Journal of Energy Resources Technology, Transactions of the Asme. 130: 0230011-02300110. DOI: 10.1115/1.2824284 |
0.843 |
|
2007 |
Zhang Y, Reuterfors EP, McLaury BS, Shirazi SA, Rybicki EF. Comparison of computed and measured particle velocities and erosion in water and air flows Wear. 263: 330-338. DOI: 10.1016/J.Wear.2006.12.048 |
0.56 |
|
2006 |
Erdal FM, Shirazi SA. Effect of the inlet geometry on the flow in a cylindrical cyclone separator Journal of Energy Resources Technology, Transactions of the Asme. 128: 62-69. DOI: 10.1115/1.2160512 |
0.872 |
|
2006 |
Chen X, McLaury BS, Shirazi SA. A comprehensive procedure to estimate erosion in elbows for gas/liquid/sand multiphase flow Journal of Energy Resources Technology, Transactions of the Asme. 128: 70-78. DOI: 10.1115/1.2131885 |
0.63 |
|
2006 |
Chen X, McLaury BS, Shirazi SA. Numerical and experimental investigation of the relative erosion severity between plugged tees and elbows in dilute gas/solid two-phase flow Wear. 261: 715-729. DOI: 10.1016/J.Wear.2006.01.022 |
0.597 |
|
2006 |
Adsani E, Shirazi SA, Shadley JR, Rybicki EF. Validation of mass transfer coefficient models used in predicting CO 2 corrosion in vertical two-phase flow in the oil and gas production Nace - International Corrosion Conference Series. 065731-0657312. |
0.835 |
|
2006 |
Adsani E, Shirazi SA, Shadley JR, Rybicki EF. Validation of mass transfer coefficient models used in predicting CO2 corrosion in vertical two-phase flow in the oil and gas production Nace - International Corrosion Conference Series. |
0.834 |
|
2006 |
McLaury BS, Shirazi SA, Mazumder QH, Viswanathan V. Effect of upstream pipe orientation on erosion in bends for annular flow Nace - International Corrosion Conference Series. 065721-0657219. |
0.82 |
|
2005 |
Chen X, McLaury BS, Shirazi SA. A comprehensive erosion prediction method for gas/liquid/sand multiphase flow Proceedings of 2005 Asme Fluids Engineering Division Summer Meeting, Fedsm2005. 2005: 1290-1297. DOI: 10.1115/FEDSM2005-77223 |
0.6 |
|
2005 |
Mazumder QH, Shirazi SA, McLaury BS, Shadley JR, Rybicki EF. Development and validation of a mechanistic model to predict solid particle erosion in multiphase flow Wear. 259: 203-207. DOI: 10.1016/J.Wear.2005.02.109 |
0.833 |
|
2005 |
Chen X, McLaury BS, Shirazi SA. A comprehensive prediction method for gas/liquid/sand multiphase flow Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference. 1: 951-958. |
0.601 |
|
2005 |
Adsani E, Shirazi SA, Shadley JR, Rybicki EF. CO2 corrosion rate prediction in vertical multiphase flow Second Spe International Symposium On Oilfield Corrosion 2005: Corrosion Control in Oil and Gas Production - "Fluids, Chemicals, Materials and More", Proceedings. 133-136. |
0.831 |
|
2004 |
Shirazi SA, Al-Adsani E, Shadley JR, Rybicki EF. A mechanistic model for predicting heat and mass transfer in vertical two-phase flow Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 3: 685-693. DOI: 10.1115/Ht-Fed2004-56465 |
0.505 |
|
2004 |
Sampson MJ, Shirazi SA, McLaury BS. Particle velocity measurments to improve erosion prediction Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 3: 647-652. DOI: 10.1115/Ht-Fed2004-56389 |
0.39 |
|
2004 |
Erdal FM, Shirazi SA. Local velocity measurements and computational fluid dynamics (CFD) simulations of swirling flow in a cylindrical cyclone separator Journal of Energy Resources Technology, Transactions of the Asme. 126: 326-333. DOI: 10.1115/1.1805539 |
0.852 |
|
2004 |
Harun AF, Prado MG, Shirazi SA, Doty DR. Two-phase flow modeling of inducers Journal of Energy Resources Technology, Transactions of the Asme. 126: 140-148. DOI: 10.1115/1.1738124 |
0.601 |
|
2004 |
Chen X, McLaury BS, Shirazi SA. Application and experimental validation of a computational fluid dynamics (CFD)-based erosion prediction model in elbows and plugged tees Computers and Fluids. 33: 1251-1272. DOI: 10.1016/J.Compfluid.2004.02.003 |
0.441 |
|
2003 |
Wang J, Shirazi SA. A CFD based correlation for erosion factor for long-radius elbows and bends Journal of Energy Resources Technology, Transactions of the Asme. 125: 26-34. DOI: 10.1115/1.1514674 |
0.486 |
|
2003 |
Erdal FM, Shirazi SA. LDV measurements of a swirling flow in a cylinder with one tangential inclined inlet Proceedings of the Asme Fluids Engineering Division Summer Meeting. 2: 467-477. |
0.862 |
|
2003 |
Mazumder QH, Santos G, Shirazi SA, McLaury BS. Effect of sand distribution on erosion in annular three-phase flow Proceedings of the Asme/Jsme Joint Fluids Engineering Conference. 2: 871-880. |
0.817 |
|
2002 |
Lackner G, Doty DR, Shirazi SA, Schmidt Z. Effect of viscosity on downhole gas separation in a rotary gas separator Spe Production and Facilities. 17: 184-191. DOI: 10.2118/79076-Pa |
0.537 |
|
2002 |
Harun AF, Prado MG, Shirazi SA, Doty DR. An improved model for predicting separation efficiency of a rotary gas separator in ESP systems Spe Production and Facilities. 17: 78-83. DOI: 10.2118/77279-Pa |
0.438 |
|
2002 |
Chen X, McLaury BS, Shirazi SA. Effects of applying a stochastic rebound model in erosion prediction of elbow and plugged tee American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 257: 247-254. DOI: 10.1115/FEDSM2002-31289 |
0.455 |
|
2002 |
Nugroho SS, McLaury BS, Shirazi SA. Application of CFD-based erosion prediction procedure for sudden expansions American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 257: 231-236. DOI: 10.1115/FEDSM2002-31286 |
0.47 |
|
2002 |
Erdal FM, Shirazi SA. Effect of inlet configuration on flow behavior in a cylindrical cyclone separator American Society of Mechanical Engineers, Petroleum Division (Publication) Pd. 1: 521-529. DOI: 10.1115/ETCE2002/MANU-29110 |
0.868 |
|
2001 |
Edwards JK, McLaury BS, Shirazi SA. Modeling solid particle erosion in elbows and plugged tees Journal of Energy Resources Technology, Transactions of the Asme. 123: 277-284. DOI: 10.1115/1.1413773 |
0.558 |
|
2001 |
Wang J, Shirazi SA. CFD based correlation for mass transfer coefficient in elbows International Journal of Heat and Mass Transfer. 44: 1817-1822. DOI: 10.1016/S0017-9310(00)00222-2 |
0.467 |
|
2000 |
Erdal FM, Shirazi SA, Mantilla I, Shoham O. Computational Fluid Dynamics (CFD) study of bubble carry-under in gas-liquid cylindrical cyclone separators Spe Production and Facilities. 15: 217-222. DOI: 10.2118/66500-Pa |
0.865 |
|
2000 |
Xu J, Shirazi SA, Doty DR, Prado MG, Blais RN. Prediction of turbulent friction in rod-pumped wells Spe Journal. 5: 182-189. DOI: 10.2118/62486-Pa |
0.369 |
|
2000 |
McLaury BS, Shirazi SA, Burden TL. Effect of entrance shape on erosion in the throat of chokes Journal of Energy Resources Technology, Transactions of the Asme. 122: 198-204. DOI: 10.1115/1.1325407 |
0.537 |
|
2000 |
McLaury BS, Shirazi SA. An alternate method to API RP 14E for predicting solids erosion in multiphase flow Journal of Energy Resources Technology, Transactions of the Asme. 122: 115-122. DOI: 10.1115/1.1288209 |
0.527 |
|
2000 |
Wang J, Shirazi SA. A simultaneous variable solution procedure for laminar and turbulent flows in curved channels and bends Journal of Fluids Engineering, Transactions of the Asme. 122: 552-559. DOI: 10.1115/1.1287723 |
0.455 |
|
2000 |
Shirazi SA, McLaury BS. Erosion modeling of elbows in multiphase flow American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 253: 1011-1020. |
0.478 |
|
2000 |
Edwards JK, McLaury BS, Shirazi SA. Evaluation of alternative pipe bend fittings in erosive service American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 253: 959-966. |
0.382 |
|
2000 |
Harun AF, Prado MG, Shirazi SA, Doty DR. Improved model for predicting separation efficiency of a rotary gas separator in ESP systems Proceedings - Spe Annual Technical Conference and Exhibition. 399-409. |
0.344 |
|
2000 |
Burden TL, McLaury BS, Shirazi SA. LDV measurements for validation of turbulence modeling in a choke and a rounded-throat-inlet choke American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 253: 263-270. |
0.365 |
|
2000 |
Aldridge DS, Shaw BS, Shirazi SA. Economic, safety, and performance considerations for safety system design for large-bore gas completions Proceedings of the Annual Offshore Technology Conference. 3: 81-90. |
0.434 |
|
1999 |
Erdal FM, Shirazi SA, Mantilla I, Shoham O. CFD study of bubble carry-under in gas-liquid cylindrical cyclone separators Spe/Epa Exploration &Amp; Production Environmental Conference. 125-135. DOI: 10.2118/49309-Ms |
0.874 |
|
1999 |
McLaury BS, Shirazi SA. Predicting sand erosion in chokes for high pressure wells Spe/Epa Exploration &Amp; Production Environmental Conference. 113-124. DOI: 10.2118/49308-Ms |
0.535 |
|
1999 |
Mantilla I, Shirazi SA, Shoham O. Flow field prediction and bubble trajectory model in gas-liquid cylindrical cyclone (GLCC) separators Journal of Energy Resources Technology, Transactions of the Asme. 121: 9-14. DOI: 10.1115/1.2795063 |
0.564 |
|
1999 |
McLaury BS, Shirazi SA. Generalization of API RP 14E for erosive service in multiphase production Proceedings - Spe Annual Technical Conference and Exhibition. 2. |
0.36 |
|
1999 |
Edwards JK, Erdal FM, McLaury BS, Shirazi SA. Validation of a CFD code for tangentially injected swirling flows and flow in 90°elbows Proceedings of the 1999 3rd Asme/Jsme Joint Fluids Engineering Conference, Fedsm'99, San Francisco, California, Usa, 18-23 July 1999 (Cd-Rom). 1. |
0.856 |
|
1999 |
McLaury BS, Shirazi SA. Predicting sand erosion in chokes for high pressure wells Spe/Epa Exploration &Amp; Production Environmental Conference. 113-124. |
0.443 |
|
1999 |
Erdal FM, Shirazi SA, Mantilla I, Shoham O. CFD study of bubble carry-under in gas-liquid cylindrical cyclone separators Spe/Epa Exploration &Amp; Production Environmental Conference. 125-135. |
0.875 |
|
1998 |
Shadley JR, Shirazi SA, Dayalan E, Rybicki EF. Prediction of Erosion-Corrosion Penetration Rate in a Carbon Dioxide Environment with Sand Corrosion. 54: 972-978. DOI: 10.5006/1.3284819 |
0.466 |
|
1998 |
Azouz I, Shirazi SA. Evaluation of several turbulence models for turbulent flow in concentric and eccentric annuli Journal of Energy Resources Technology, Transactions of the Asme. 120: 268-275. DOI: 10.1115/1.2795047 |
0.422 |
|
1998 |
Shadley JR, Rybicki EF, Shirazi SA, Dayalan E. Velocity guidelines for avoiding erosion-corrosion damage in sweet production with sand Journal of Energy Resources Technology, Transactions of the Asme. 120: 78-83. DOI: 10.1115/1.2795014 |
0.495 |
|
1998 |
Lackner G, Alhanati FJS, Shirazi SA, Doty DR, Schmidt Z. Numerical simulation of the gas-liquid flow in a rotary gas separator Journal of Energy Resources Technology, Transactions of the Asme. 120: 41-48. DOI: 10.1115/1.2795008 |
0.605 |
|
1998 |
Shirazi SA, Soulisa R, Lebeck AO, Nygren ME. Fluid temperature and film coefficient prediction and measurement in mechanical face seals - Numerical results Tribology Transactions. 41: 459-470. DOI: 10.1080/10402009808983770 |
0.371 |
|
1997 |
McLaury BS, Wang J, Shirazi SA, Shadley JR, Rybicki EF. Solid particle erosion in long radius elbows and straight pipes Proceedings - Spe Annual Technical Conference and Exhibition. 977-986. DOI: 10.2118/38842-Ms |
0.465 |
|
1997 |
Azouz I, Shirazi SA. Numerical simulation of drag reducing turbulent flow in annular conduits Journal of Fluids Engineering, Transactions of the Asme. 119: 838-846. DOI: 10.1115/1.2819506 |
0.584 |
|
1996 |
Shadley JR, Shirazi SA, Dayalan E, Ismail M, Rybicki EF. Erosion-Corrosion of a Carbon Steel Elbow in a Carbon Dioxide Environment Corrosion. 52: 714-723. DOI: 10.5006/1.3292162 |
0.55 |
|
1996 |
Erdal FM, Shirazi SA, Shoham O, Kouba GE. CFD simulation of single-phase and two-phase flow in gas-liquid cylindrical cyclone separators Proceedings - Spe Annual Technical Conference and Exhibition. 707-717. DOI: 10.2118/36645-Pa |
0.863 |
|
1996 |
Arpandi IA, Joshi AR, Shoham O, Shirazi SA, Kouba GE. Hydrodynamics of two-phase flow in Gas-Liquid Cylindrical Cyclone separators Spe Journal. 1: 427-436. DOI: 10.2118/30683-Pa |
0.586 |
|
1996 |
McLaury BS, Shirazi SA, Shadley JR, Rybicki EF. Modeling erosion in chokes American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 236: 773-781. |
0.441 |
|
1996 |
Shadley JR, Shirazi SA, Dayalan E, Rybicki EF. Using an inhibitor to combat erosion-corrosion in carbon steel piping - how much does it help? Proceedings of the Annual Offshore Technology Conference. 4: 437-443. |
0.353 |
|
1996 |
Wang J, Shirazi SA, Shadley JR, Rybicki EF. Application of flow modeling and particle tracking to predict sand erosion rates in 90 degree elbows American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 236: 725-734. |
0.384 |
|
1995 |
Shirazi SA, Shadley JR, McLaury BS, Rybicki EF. Procedure to predict solid particle erosion in elbows and tees Journal of Pressure Vessel Technology, Transactions of the Asme. 117: 45-52. DOI: 10.1115/1.2842089 |
0.448 |
|
1994 |
Shirazi SA, McLaury BS, Shadley JR, Rybicki EF. Generalization of the API RP 14E guideline for erosive services Proceedings - Spe Annual Technical Conference and Exhibition. 583-592. DOI: 10.2118/28518-Pa |
0.434 |
|
1993 |
Azouz I, Shirazi SA, Pilehvari A, Azar JJ. Numerical Simulation of Laminar Flow of Yield-Power-Law Fluids in Conduits of Arbitrary Cross-Section Journal of Fluids Engineering-Transactions of the Asme. 115: 710-716. DOI: 10.1115/1.2910203 |
0.539 |
|
1993 |
Truman CR, Shirazi SA, Blottner FG. Noniterative solution for pressure in parabolic flows Journal of Fluids Engineering, Transactions of the Asme. 115: 627-630. DOI: 10.1115/1.2910190 |
0.381 |
|
1992 |
Azouz I, Shirazi SA, Pilehvari A, Azar JJ. Numerical simulation of laminar flow of Newtonian and non-Newtonian fluids in conduits of arbitrary cross-section Society of Petroleum Engineers of Aime, (Paper) Spe. |
0.467 |
|
1991 |
Shirazi SA, Truman CR. Simple turbulence models for supersonic flows - Bodies at incidence and compression corners Aiaa Journal. 29: 1850-1859. DOI: 10.2514/3.10810 |
0.533 |
|
1988 |
Shirazi SA, Truman CR. PREDICTION OF TURBULENT SOURCE FLOW BETWEEN COROTATING DISKS WITH AN ANISOTROPIC TWO-EQUATION TURBULENCE MODEL Journal of Turbomachinery. 110: 187-194. DOI: 10.1115/1.3262179 |
0.461 |
|
1987 |
Shirazi SA, Truman CR. Evaluation of algebraic turbulence models for PNS predictions of supersonic flow past a sphere-cone Aiaa Journal. 27: 560-568. DOI: 10.2514/3.10146 |
0.694 |
|
Show low-probability matches. |