| Year |
Citation |
Score |
| 2020 |
Kazmer DO, Colon A. Injection printing: additive molding via shell material extrusion and filling Additive Manufacturing. 36: 101469. DOI: 10.1016/J.Addma.2020.101469 |
0.335 |
|
| 2020 |
Coogan TJ, Kazmer DO. Prediction of interlayer strength in material extrusion additive manufacturing Additive Manufacturing. 35: 101368. DOI: 10.1016/J.Addma.2020.101368 |
0.453 |
|
| 2019 |
Coogan TJ, Kazmer DO. Modeling of interlayer contact and contact pressure during fused filament fabrication Journal of Rheology. 63: 655-672. DOI: 10.1122/1.5093033 |
0.411 |
|
| 2019 |
Coogan TJ, Kazmer DO. In-line rheological monitoring of fused deposition modeling Journal of Rheology. 63: 141-155. DOI: 10.1122/1.5054648 |
0.424 |
|
| 2018 |
Kazmer DO, Grosskopf CM, Venoor V. Vortical Fountain Flows in Plasticating Screws. Polymers. 10. PMID 30960748 DOI: 10.3390/Polym10080823 |
0.394 |
|
| 2017 |
Gordon G, Kazmer DO, Tang X-, Fan Z-, Gao RX. Validation of an In-Mold Multivariate Sensor for Measurement of Melt Temperature, Pressure, Velocity, and Viscosity International Polymer Processing. 32: 406-415. DOI: 10.3139/217.2964 |
0.72 |
|
| 2017 |
Wang P, Fan Z, Kazmer DO, Gao RX. Orthogonal Analysis of Multisensor Data Fusion for Improved Quality Control Journal of Manufacturing Science and Engineering. 139. DOI: 10.1115/1.4036907 |
0.415 |
|
| 2017 |
Coogan TJ, Kazmer DO. Healing simulation for bond strength prediction of FDM Rapid Prototyping Journal. 23: 551-561. DOI: 10.1108/Rpj-03-2016-0051 |
0.322 |
|
| 2017 |
Coogan TJ, Kazmer DO. Bond and part strength in fused deposition modeling Rapid Prototyping Journal. 23: 414-422. DOI: 10.1108/Rpj-03-2016-0050 |
0.308 |
|
| 2017 |
Moshe A, Kazmer DO, Sobkowicz-Kline MJ, Johnston SP, Kenig S. Transient modeling of viscosity Polymer Engineering and Science. 57: 1110-1118. DOI: 10.1002/Pen.24486 |
0.363 |
|
| 2016 |
Mendible GA, Kazmer DO, Gao RX, Johnston SP. Estimation of bulk melt-temperature from in-mold thermal sensors for injection molding, Part B: Validation International Polymer Processing. 31: 278-284. DOI: 10.3139/217.3024 |
0.452 |
|
| 2016 |
Fan Z, Gao RX, Wang P, Kazmer DO. Multi-sensor data fusion for improved measurement accuracy in injection molding Conference Record - Ieee Instrumentation and Measurement Technology Conference. 2016. DOI: 10.1109/I2MTC.2016.7520465 |
0.366 |
|
| 2016 |
Moshe A, Kazmer DO, Johnston SP, Malloy RM, Kenig S. Analysis of variance in capillary rheometry Polymer Engineering and Science. 56: 895-904. DOI: 10.1002/Pen.24318 |
0.438 |
|
| 2015 |
Johnston SP, Mendible GA, Gao RX, Kazmer DO. Estimation of bulk melt-temperature from in-mold thermal sensors for injection molding, part A: Method International Polymer Processing. 30: 460-466. DOI: 10.3139/217.3019 |
0.371 |
|
| 2015 |
Kazmer DO, Gordon GW, Mendible GA, Johnston SP, Tang X, Fan Z, Gao RX. A multivariate sensor for intelligent polymer processing Ieee/Asme Transactions On Mechatronics. 20: 1015-1023. DOI: 10.1109/Tmech.2014.2363691 |
0.743 |
|
| 2015 |
Gordon G, Kazmer DO, Tang X, Fan Z, Gao RX. Quality control using a multivariate injection molding sensor International Journal of Advanced Manufacturing Technology. DOI: 10.1007/S00170-014-6706-6 |
0.754 |
|
| 2015 |
Gordon G, Kazmer DO, Tang X, Fan Z, Gao RX. In-mold multivariate sensing of colored polystyrene Polymer Engineering and Science. 55: 2794-2800. DOI: 10.1002/Pen.24170 |
0.739 |
|
| 2015 |
Johnston S, McCready C, Hazen D, Vanderwalker D, Kazmer D. On-line multivariate optimization of injection molding Polymer Engineering and Science. 55: 2743-2750. DOI: 10.1002/Pen.24163 |
0.356 |
|
| 2014 |
Gao RX, Tang X, Gordon G, Kazmer DO. Online product quality monitoring through in-process measurement Cirp Annals - Manufacturing Technology. 63: 493-496. DOI: 10.1016/J.Cirp.2014.03.041 |
0.688 |
|
| 2014 |
Kazmer DO. System identification and modeling of viscoelastic behavior from capillary melt rheological data Polymer Engineering and Science. 54: 2824-2838. DOI: 10.1002/Pen.23840 |
0.386 |
|
| 2014 |
Gordon GW, Kazmer DO, Gao RX, Fan Z, Tang X. Steady state and response time temperature validation for a multivariate injection molding sensor Annual Technical Conference - Antec, Conference Proceedings. 3: 2298-2304. |
0.659 |
|
| 2013 |
Fan Z, Gao RX, Asadizanjani N, Kazmer DO. Acoustic wave-based data transmission for multivariate sensing Ieee Transactions On Instrumentation and Measurement. 62: 3026-3034. DOI: 10.1109/Tim.2013.2270038 |
0.375 |
|
| 2013 |
Gordon GW, Kazmer DO, Fisches MK, Gao RX, Fan Z, Asadiznajani N. Melt flow simulation of an injection molding cavity for validation of a multivariate sensor Annual Technical Conference - Antec, Conference Proceedings. 2: 1116-1121. |
0.714 |
|
| 2013 |
Fisches MK, Kazmer DO, Gao RX, Gordon GW, Fan Z, Asadiznajani N. Verification of rheological mixing rules to the application of masterbatches Annual Technical Conference - Antec, Conference Proceedings. 2: 1073-1078. |
0.595 |
|
| 2013 |
Gordon GW, Kazmer DO, Gao RX, Fan Z, Asadiznajani N. Temperature modeling for a multivariate injection molding sensor Annual Technical Conference - Antec, Conference Proceedings. 2: 1103-1110. |
0.672 |
|
| 2012 |
Fang L, Wei M, Shang Y, Kazmer D, Barry C, Mead J. Precise pattern replication of polymer blends into nonuniform geometries via reducing interfacial tension between two polymers. Langmuir : the Acs Journal of Surfaces and Colloids. 28: 10238-45. PMID 22651098 DOI: 10.1021/La3008409 |
0.568 |
|
| 2012 |
Shang Y, Kazmer DO. A MATLAB programme for quantitative simulation of self-assembly of polymer blend films with nanoscaled features International Journal of Computer Aided Engineering and Technology. 4: 181-192. DOI: 10.1504/Ijcaet.2012.045656 |
0.584 |
|
| 2012 |
Asadizanjani N, Gao RX, Fan Z, Kazmer DO. Viscosity measurement in injection molding using a multivariate sensor Asme/Iscie 2012 International Symposium On Flexible Automation, Isfa 2012. 231-237. DOI: 10.1115/ISFA2012-7246 |
0.506 |
|
| 2012 |
Gao RX, Kazmer DO. Multivariate sensing and wireless data communication for process monitoring in RF-shielded environment Cirp Annals - Manufacturing Technology. 61: 523-526. DOI: 10.1016/J.Cirp.2012.03.014 |
0.469 |
|
| 2012 |
Kazmer DO, Johnston SP, Gordon GW, Gao RX, Fan Z, Asadiznajani N. A multivariate in-mold sensor design for measurement of melt pressure, temperature, velocity, and viscosity Annual Technical Conference - Antec, Conference Proceedings. 2: 1559-1566. |
0.721 |
|
| 2011 |
Kazmer DO, Johnston SP, Gao RX, Fan Z. Feasibility analysis of an in-mold multivariate sensor International Polymer Processing. 26: 63-72. DOI: 10.3139/217.2397 |
0.576 |
|
| 2011 |
Shang Y, Fang L, Wei M, Barry C, Mead J, Kazmer D. Verification of numerical simulation of the self-assembly of polymer-polymer- solvent ternary blends on a heterogeneously functionalized substrate Polymer. 52: 1447-1457. DOI: 10.1016/J.Polymer.2011.01.038 |
0.584 |
|
| 2010 |
Panchal RR, Kazmer DO. In-situ shrinkage sensor for injection molding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132. DOI: 10.1115/1.4002765 |
0.798 |
|
| 2010 |
McCusker JR, Danai K, Kazmer DO. Validation of dynamic models in the time-scale domain Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 132. DOI: 10.1115/1.4002479 |
0.349 |
|
| 2010 |
Shang Y, Kazmer D, Wei M, Barry C, Mead J. Numerical simulation of the self-assembly of a polymer-polymer-solvent ternary system on a heterogeneously functionalized substrate Polymer Engineering & Science. 50: 2329-2339. DOI: 10.1002/Pen.21762 |
0.569 |
|
| 2010 |
Kazmer DO, Velusamy S, Westerdale S, Johnston S, Gao RX. A comparison of seven filling to packing switchover methods for injection molding Polymer Engineering and Science. 50: 2031-2043. DOI: 10.1002/Pen.21731 |
0.384 |
|
| 2010 |
Panchal RR, Kazmer DO. Validation of in-mold shrinkage sensor for different cavity thicknesses Annual Technical Conference - Antec, Conference Proceedings. 1: 268-272. |
0.78 |
|
| 2009 |
Fan Z, Gao RX, Kazmer DO. Design and evaluation of a modulator circuit for a self-energized wireless sensor Asme International Mechanical Engineering Congress and Exposition, Proceedings. 6: 41-48. DOI: 10.1115/IMECE2008-67848 |
0.381 |
|
| 2009 |
Panchal RR, Kazmer DO, Gao RX. Design and validation of an in-mold shrinkage sensor Asme International Mechanical Engineering Congress and Exposition, Proceedings. 15: 171-179. DOI: 10.1115/IMECE2008-66400 |
0.797 |
|
| 2009 |
Fan Z, Gao RX, Kazmer DO. Self-energized acoustic wireless sensor for pressure-temperature measurement in injection molding cavity Proceedings of Ieee Sensors. 65-68. DOI: 10.1109/ICSENS.2009.5398527 |
0.432 |
|
| 2009 |
Fang L, Wei M, Shang Y, Jimenez L, Kazmer D, Barry C, Mead J. Surface morphology alignment of block copolymers induced by injection molding Polymer. 50: 5837-5845. DOI: 10.1016/J.Polymer.2009.09.013 |
0.564 |
|
| 2009 |
Kazmer DO, Westerdale S. A model-based methodology for on-line quality control International Journal of Advanced Manufacturing Technology. 42: 280-292. DOI: 10.1007/S00170-008-1592-4 |
0.32 |
|
| 2009 |
Johnston SP, Kazmer DO, Gao RX. Online simulation-based process control for injection molding Polymer Engineering and Science. 49: 2482-2491. DOI: 10.1002/Pen.21481 |
0.45 |
|
| 2009 |
Panchal RR, Kazmer DO. In-mold shrinkage monitoring sensor for injection molding Annual Technical Conference - Antec, Conference Proceedings. 4: 1925-1929. |
0.795 |
|
| 2008 |
Shang Y, Kazmer D, Wei M, Mead J, Barry C. Numerical simulation of phase separation of immiscible polymer blends on a heterogeneously functionalized substrate. The Journal of Chemical Physics. 128: 224909. PMID 18554055 DOI: 10.1063/1.2924129 |
0.541 |
|
| 2008 |
Kazmer DO, Westerdale S, Hazen D. A Comparison of Statistical Process Control (SPC) and On-Line Multivariate Analyses (MVA) for Injection Molding International Polymer Processing. 23: 447-458. DOI: 10.3139/217.2192 |
0.328 |
|
| 2008 |
Gao RX, Fan Z, Kazmer DO. Injection molding process monitoring using a self-energized dual-parameter sensor Cirp Annals - Manufacturing Technology. 57: 389-393. DOI: 10.1016/J.Cirp.2008.03.055 |
0.511 |
|
| 2007 |
Cui Y, Gao RX, Yang D, Kazmer DO. A bond graph approach to energy efficiency analysis of a self-powered wireless pressure sensor Smart Structures and Systems. 3: 1-22. DOI: 10.12989/Sss.2007.3.1.001 |
0.314 |
|
| 2007 |
Karania R, Kazmer D. Low Volume Plastics Manufacturing Strategies Journal of Mechanical Design. 129: 1225-1233. DOI: 10.1115/1.2790978 |
0.301 |
|
| 2007 |
Dong S, Chunsheng E, Fan B, Danai K, Kazmer DO. Process-driven input profiling for plastics processing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 802-809. DOI: 10.1115/1.2738094 |
0.364 |
|
| 2006 |
Kazmer DO, Gupta D. A low force valve for dynamic control of molten plastics in a mold International Polymer Processing. 21: 175-182. DOI: 10.3139/217.0094 |
0.397 |
|
| 2006 |
Fan B, Munavalli M, Kazmer DO. Polymer flow in a melt pressure regulator Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 716-722. DOI: 10.1115/1.2193545 |
0.428 |
|
| 2006 |
Zhang L, Theurer CB, Gao RX, Kazmer DO. Analytic wavelet-based ultrasonic pulse differentiation for injection mold cavity pressure measurement Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 370-374. DOI: 10.1115/1.2123048 |
0.375 |
|
| 2006 |
Theurer CB, Zhang L, Kazmer DO, Gao RX, Jackson RW. Passive charge modulation for a wireless pressure sensor Ieee Sensors Journal. 6: 47-54. DOI: 10.1109/Jsen.2005.859785 |
0.438 |
|
| 2006 |
Gao RX, Fan Z, Kazmer DO. Design of an acoustic transmitter for temperature-pressure dual sensing in injection molding Proceedings of Ieee Sensors. 1053-1056. DOI: 10.1109/ICSENS.2007.355806 |
0.342 |
|
| 2006 |
Johnston S, Kazmer DO. Decoupled gating and simulation for injection molding Polymer - Plastics Technology and Engineering. 45: 575-584. DOI: 10.1080/03602550600555999 |
0.423 |
|
| 2006 |
Fan B, Kazmer DO, Nageri R. An analytical non-Newtonian and nonisothermal viscous flow simulation Polymer - Plastics Technology and Engineering. 45: 429-438. DOI: 10.1080/03602550600554018 |
0.391 |
|
| 2006 |
Kazmer DO, Nageri R, Kudchakar V, Fan B, Gao R. Validation of three on-line flow simulations for injection molding Polymer Engineering and Science. 46: 274-288. DOI: 10.1002/Pen.20463 |
0.452 |
|
| 2006 |
Kazmer D, Gupta D, Munavalli M, Kudchadkar V, Nageri R. Design and performance analysis of a self-regulating melt pressure valve Polymer Engineering and Science. 46: 549-557. DOI: 10.1002/Pen.20399 |
0.414 |
|
| 2005 |
Zhang L, Theurer CB, Gao RX, Kazmer DO. Design of ultrasonic transmitters with defined frequency characteristics for wireless pressure sensing in injection molding. Ieee Transactions On Ultrasonics, Ferroelectrics, and Frequency Control. 52: 1360-71. PMID 16245605 DOI: 10.1109/Tuffc.2005.1509795 |
0.453 |
|
| 2005 |
Fan B, Kazmer DO. Low-temperature modeling of the time-temperature shift factor for polycarbonate Advances in Polymer Technology. 24: 278-287. DOI: 10.1002/Adv.20049 |
0.386 |
|
| 2005 |
Kazmer DO, Knepper P, Johnston S. A review of in-mold pressure and temperature instrumentation Annual Technical Conference - Antec, Conference Proceedings. 8: 375-379. |
0.399 |
|
| 2005 |
Kazmer DO, Nageri R, Fan B, Kudchakar V, Johnston S. Validation of on-line molding process simulation Annual Technical Conference - Antec, Conference Proceedings. 2: 116-120. |
0.302 |
|
| 2004 |
Kazmer D, Kudchadkar V, Nageri R. Validation of moulding productivity with two self-regulating melt pressure valves Plastics Rubber and Composites. 33: 446-451. DOI: 10.1179/174328904X29957 |
0.376 |
|
| 2004 |
Kazmer D, Kudchadkar V, Nageri R. Validation of moulding consistency with a self-regulating melt pressure valve Plastics Rubber and Composites. 33: 438-445. DOI: 10.1179/174328904X29948 |
0.401 |
|
| 2004 |
Zhang L, Theurer CB, Gao RX, Kazmer DO. A self-energized sensor for wireless injection mold cavity pressure measurement: Design and evaluation Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 126: 309-318. DOI: 10.1115/1.1767850 |
0.541 |
|
| 2004 |
Theurer CB, Zhang L, Kazmer DO, Gao RX. Energy Extraction for a Self-Energized Pressure Sensor Ieee Sensors Journal. 4: 28-35. DOI: 10.1109/Jsen.2003.820358 |
0.491 |
|
| 2004 |
Fan B, Kazmer DO, Bushko WC, Theriault RP, Poslinski AJ. Birefringence prediction of optical media Polymer Engineering and Science. 44: 814-824. DOI: 10.1002/Pen.20073 |
0.337 |
|
| 2004 |
Kazmer D, Lotti C, Bretas RES, Zhu L. Tuning and Control of Dimensional Consistency in Molded Products Advances in Polymer Technology. 23: 163-175. DOI: 10.1002/Adv.20007 |
0.324 |
|
| 2004 |
Kazmer DO, Fan B, Nageri R. On-line flow rate and pressure analysis with sensor fusion Annual Technical Conference - Antec, Conference Proceedings. 3: 3428-3432. |
0.319 |
|
| 2003 |
Kazmer D, Hatch D, Zhu L, Roser C, Kapoor D. Definition and Application of a Process Flexibility Index Journal of Manufacturing Science and Engineering-Transactions of the Asme. 125: 164-171. DOI: 10.1115/1.1536174 |
0.304 |
|
| 2003 |
Fan B, Kazmer DO, Bushko WC, Theriault RP, Poslinski AJ. Warpage prediction of optical media Journal of Polymer Science, Part B: Polymer Physics. 41: 859-872. DOI: 10.1002/Polb.10439 |
0.357 |
|
| 2003 |
Fan B, Kazmer DO, Theriault RP, Poslinski AJ. Simulation of Injection-Compression Molding for Optical Media Polymer Engineering and Science. 43: 596-606. DOI: 10.1002/Pen.10048 |
0.399 |
|
| 2003 |
Kazmer DO, Gao RX, Theurer CB, Zhang L. Wireless pressure sensor for injection molding Annual Technical Conference - Antec, Conference Proceedings. 3: 3290-3294. |
0.368 |
|
| 2002 |
Theurer CB, Zhang L, Kazmer DO, Gao RX. Threshold energy switching and its application to wireless sensing in high energy manufacturing processes Asme International Mechanical Engineering Congress and Exposition, Proceedings. 1071-1077. DOI: 10.1115/IMECE2002-33219 |
0.337 |
|
| 2002 |
Zhang L, Theurer CB, Gao RX, Kazmer DO. Development of a wireless pressure sensor with remote acoustic transmission Technical Paper - Society of Manufacturing Engineers. Ms. 1-8. |
0.411 |
|
| 2002 |
Zhang L, Theurer CB, Gao RX, Kazmer DO. Design of a wireless sensor for injection molding cavity pressure measurement American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) Dsc. 70: 1-7. |
0.349 |
|
| 2001 |
Xu H, Kazmer DO. Tight tolerance thermoforming International Polymer Processing. 16: 208-215. DOI: 10.3139/217.1629 |
0.367 |
|
| 2001 |
Yang D, Danai K, Kazmer D. A knowledge-based tuning method for injection molding machines Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 682-691. DOI: 10.1115/1.1382596 |
0.318 |
|
| 2001 |
Hatch D, Kazmer D. Process Transfer Function Development for Optical Media Manufacturing The International Journal of Advanced Manufacturing Technology. 18: 357-365. DOI: 10.1007/S001700170059 |
0.332 |
|
| 2001 |
Xu H, Kazmer DO. Thermoforming shrinkage prediction Polymer Engineering and Science. 41: 1553-1563. DOI: 10.1002/Pen.10854 |
0.345 |
|
| 2001 |
Zhang L, Theurer CB, Gao RX, Kazmer DO. Design of a wireless sensor for injection molding cavity pressure measurement Asme International Mechanical Engineering Congress and Exposition, Proceedings. 2: 947-953. |
0.349 |
|
| 2000 |
Kazmer D, Zhu L, Hatch D. Process Window Derivation With an Application to Optical Media Manufacturing Journal of Manufacturing Science and Engineering. 123: 303-311. DOI: 10.1115/1.1363600 |
0.304 |
|
| 1999 |
Kazmer D, Hatch D. Towards Controllability of Injection Molding Journal of Materials Processing & Manufacturing Science. 8: 127-140. DOI: 10.1106/Dad5-Pngg-U87B-08Y5 |
0.4 |
|
| 1999 |
Petrova T, Kazmer D. Incorporation of Phenomenological Models in a Hybrid Neural Network for Quality Control of Injection Molding Polymer-Plastics Technology and Engineering. 38: 1-18. DOI: 10.1080/03602559909351556 |
0.321 |
|
| 1999 |
Kazmer D, Roser C. Evaluation of Product and Process Design Robustness Research in Engineering Design. 11: 20-30. DOI: 10.1007/S001630050002 |
0.32 |
|
| 1999 |
Petrova T, Kazmer D. Hybrid neural models for pressure control in injection molding Advances in Polymer Technology. 18: 19-31. DOI: 10.1002/(Sici)1098-2329(199921)18:1<19::Aid-Adv3>3.0.Co;2-U |
0.334 |
|
| 1997 |
Kazmer D, Barkan P. The process capability of multi‐cavity pressure control for the injection molding process Polymer Engineering and Science. 37: 1880-1895. DOI: 10.1002/Pen.11838 |
0.405 |
|
| 1997 |
Kazmer D, Barkan P. Multi-cavity pressure control in the filling and packing stages of the injection molding process Polymer Engineering and Science. 37: 1865-1879. DOI: 10.1002/Pen.11837 |
0.399 |
|
| Show low-probability matches. |