| Year |
Citation |
Score |
| 2020 |
Yakout M, Elbestawi MA, Veldhuis SC, Nangle-Smith S. Influence of thermal properties on residual stresses in SLM of aerospace alloys Rapid Prototyping Journal. 26: 213-222. DOI: 10.1108/Rpj-03-2019-0065 |
0.337 |
|
| 2020 |
Balbaa M, Mekhiel S, Elbestawi M, McIsaac J. On selective laser melting of Inconel 718: Densification, surface roughness, and residual stresses Materials & Design. 193: 108818. DOI: 10.1016/J.Matdes.2020.108818 |
0.358 |
|
| 2020 |
Al-Rubaie KS, Melotti S, Rabelo A, Paiva JM, Elbestawi MA, Veldhuis SC. Machinability of SLM-produced Ti6Al4V titanium alloy parts Journal of Manufacturing Processes. 57: 768-786. DOI: 10.1016/J.Jmapro.2020.07.035 |
0.383 |
|
| 2020 |
Yakout M, Elbestawi MA, Veldhuis SC. A study of the relationship between thermal expansion and residual stresses in selective laser melting of Ti-6Al-4V Journal of Manufacturing Processes. 52: 181-192. DOI: 10.1016/J.Jmapro.2020.01.039 |
0.325 |
|
| 2020 |
Hussein R, Sadek A, Elbestawi MA, Attia MH. Effect of process parameters on chip formation during vibration-assisted drilling of Ti6Al4V The International Journal of Advanced Manufacturing Technology. 106: 1105-1119. DOI: 10.1007/S00170-019-04627-9 |
0.451 |
|
| 2019 |
Narvan M, Al-Rubaie KS, Elbestawi M. Process-Structure-Property Relationships of AISI H13 Tool Steel Processed with Selective Laser Melting. Materials. 12: 2284. PMID 31315237 DOI: 10.3390/Ma12142284 |
0.385 |
|
| 2019 |
Hussein R, Sadek A, Elbestawi MA, Attia MH. An Investigation into Tool Wear and Hole Quality during Low-Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stack Journal of Manufacturing and Materials Processing. 3: 63. DOI: 10.3390/JMMP3030063 |
0.37 |
|
| 2019 |
Yakout M, Elbestawi MA, Veldhuis SC. Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L Journal of Materials Processing Technology. 266: 397-420. DOI: 10.1016/J.Jmatprotec.2018.11.006 |
0.345 |
|
| 2019 |
Maamoun AH, Veldhuis SC, Elbestawi M. Friction stir processing of AlSi10Mg parts produced by selective laser melting Journal of Materials Processing Technology. 263: 308-320. DOI: 10.1016/J.Jmatprotec.2018.08.030 |
0.405 |
|
| 2019 |
Hussein R, Sadek A, Elbestawi MA, Attia MH. Elimination of delamination and burr formation using high-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material The International Journal of Advanced Manufacturing Technology. 105: 859-873. DOI: 10.1007/S00170-019-04248-2 |
0.468 |
|
| 2019 |
Balbaa MA, Elbestawi MA, McIsaac J. An experimental investigation of surface integrity in selective laser melting of Inconel 625 The International Journal of Advanced Manufacturing Technology. 104: 3511-3529. DOI: 10.1007/S00170-019-03949-Y |
0.353 |
|
| 2019 |
Hussein R, Sadek A, Elbestawi MA, Attia MH. Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V The International Journal of Advanced Manufacturing Technology. 103: 1443-1457. DOI: 10.1007/S00170-019-03608-2 |
0.429 |
|
| 2019 |
Mahmoud D, Elbestawi MA. Selective laser melting of porosity graded lattice structures for bone implants The International Journal of Advanced Manufacturing Technology. 100: 2915-2927. DOI: 10.1007/S00170-018-2886-9 |
0.311 |
|
| 2018 |
Maamoun AH, Xue YF, Elbestawi MA, Veldhuis SC. The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys. Materials (Basel, Switzerland). 12. PMID 30577519 DOI: 10.3390/Ma12010012 |
0.372 |
|
| 2018 |
Maamoun AH, Xue YF, Elbestawi MA, Veldhuis SC. Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy. Materials (Basel, Switzerland). 11. PMID 30469468 DOI: 10.3390/Ma11122343 |
0.376 |
|
| 2018 |
Yakout M, Elbestawi MA, Veldhuis SC. A study of thermal expansion coefficients and microstructure during selective laser melting of Invar 36 and stainless steel 316L Additive Manufacturing. 24: 405-418. DOI: 10.1016/J.Addma.2018.09.035 |
0.328 |
|
| 2018 |
Maamoun AH, Elbestawi M, Dosbaeva GK, Veldhuis SC. Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder Additive Manufacturing. 21: 234-247. DOI: 10.1016/J.Addma.2018.03.014 |
0.35 |
|
| 2018 |
Hussein R, Sadek A, Elbestawi MA, Attia MH. Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material The International Journal of Advanced Manufacturing Technology. 98: 2801-2817. DOI: 10.1007/S00170-018-2410-2 |
0.439 |
|
| 2018 |
Yakout M, Elbestawi MA, Veldhuis SC. On the characterization of stainless steel 316L parts produced by selective laser melting The International Journal of Advanced Manufacturing Technology. 95: 1953-1974. DOI: 10.1007/S00170-017-1303-0 |
0.418 |
|
| 2017 |
Yakout M, Cadamuro A, Elbestawi MA, Veldhuis SC. The selection of process parameters in additive manufacturing for aerospace alloys The International Journal of Advanced Manufacturing Technology. 92: 2081-2098. DOI: 10.1007/S00170-017-0280-7 |
0.39 |
|
| 2017 |
Barari A, Kishawy HA, Kaji F, Elbestawi MA. On the surface quality of additive manufactured parts The International Journal of Advanced Manufacturing Technology. 89: 1969-1974. DOI: 10.1007/S00170-016-9215-Y |
0.392 |
|
| 2012 |
Mohammed WM, Ng E, Elbestawi MA. Modeling the effect of compacted graphite iron microstructure on cutting forces and tool wear Cirp Journal of Manufacturing Science and Technology. 5: 87-101. DOI: 10.1016/J.Cirpj.2012.03.002 |
0.484 |
|
| 2011 |
Mohammed WM, Ng E, Elbestawi MA. Modeling the effect of the microstructure of compacted graphite iron on chip formation International Journal of Machine Tools & Manufacture. 51: 753-765. DOI: 10.1016/J.Ijmachtools.2011.06.005 |
0.384 |
|
| 2011 |
Damir A, Ng E, Elbestawi M. Force prediction and stability analysis of plunge milling of systems with rigid and flexible workpiece The International Journal of Advanced Manufacturing Technology. 54: 853-877. DOI: 10.1007/S00170-010-2982-Y |
0.486 |
|
| 2009 |
Stenekes J, Koshy P, Elbestawi MA. A simple method for the estimation of laser absorptivity using heat-sensitive paints Measurement Science and Technology. 20: 117002. DOI: 10.1088/0957-0233/20/11/117002 |
0.399 |
|
| 2009 |
Meyer PA, Veldhuis SC, Elbestawi MA. Predicting the effect of vibration on ultraprecision machining surface finish as described by surface finish lobes International Journal of Machine Tools and Manufacture. 49: 1165-1174. DOI: 10.1016/J.Ijmachtools.2009.08.006 |
0.387 |
|
| 2008 |
Nasr MNA, Ng EG, Elbestawi MA. A modified time-efficient FE approach for predicting machining-induced residual stresses Finite Elements in Analysis and Design. 44: 149-161. DOI: 10.1016/J.Finel.2007.11.005 |
0.337 |
|
| 2007 |
Nasr MNA, Ng E-, Elbestawi MA. Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses Journal of Engineering Materials and Technology-Transactions of the Asme. 129: 567-579. DOI: 10.1115/1.2772338 |
0.368 |
|
| 2007 |
Bardetsky A, Attia H, Elbestawi M. A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys—Part 2: Model Calibration and Verification Journal of Tribology-Transactions of the Asme. 129: 31-39. DOI: 10.1115/1.2390719 |
0.511 |
|
| 2007 |
Bardetsky A, Attia H, Elbestawi M. A fracture mechanics approach to the prediction of tool wear in dry high-speed machining of aluminum cast alloys-Part 1: Model development Journal of Tribology-Transactions of the Asme. 129: 23-30. DOI: 10.1115/1.2390718 |
0.45 |
|
| 2007 |
Omar OEEK, El-Wardany T, Ng E, Elbestawi MA. An improved cutting force and surface topography prediction model in end milling International Journal of Machine Tools & Manufacture. 47: 1263-1275. DOI: 10.1016/J.Ijmachtools.2006.08.021 |
0.473 |
|
| 2007 |
Coelho RT, Ng E, Elbestawi MA. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions International Journal of Machine Tools & Manufacture. 47: 263-272. DOI: 10.1016/J.Ijmachtools.2006.03.020 |
0.43 |
|
| 2007 |
Simoneau A, Ng E, Elbestawi MA. Modeling the effects of microstructure in metal cutting International Journal of Machine Tools & Manufacture. 47: 368-375. DOI: 10.1016/J.Ijmachtools.2006.03.006 |
0.395 |
|
| 2007 |
Nasr MNA, Ng E-, Elbestawi MA. Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L International Journal of Machine Tools & Manufacture. 47: 401-411. DOI: 10.1016/J.Ijmachtools.2006.03.004 |
0.412 |
|
| 2007 |
Simoneau A, Ng E, Elbestawi MA. Grain size and orientation effects when microcutting AISI 1045 steel Cirp Annals-Manufacturing Technology. 56: 57-60. DOI: 10.1016/J.Cirp.2007.05.016 |
0.343 |
|
| 2007 |
Tong D, Veldhuis SC, Elbestawi MA. Control of a dual stage magnetostrictive actuator and linear motor feed drive system The International Journal of Advanced Manufacturing Technology. 33: 379-388. DOI: 10.1007/S00170-006-0769-Y |
0.385 |
|
| 2006 |
Simoneau A, Ng E, Elbestawi MA. The Effect of Microstructure on Chip Formation and Surface Defects in Microscale, Mesoscale, and Macroscale Cutting of Steel Cirp Annals. 55: 97-102. DOI: 10.1016/S0007-8506(07)60375-8 |
0.378 |
|
| 2006 |
Chen L, El-Wardany TI, Nasr M, Elbestawi MA. Effects of Edge Preparation and Feed when Hard Turning a Hot Work Die Steel with Polycrystalline Cubic Boron Nitride Tools Cirp Annals. 55: 89-92. DOI: 10.1016/S0007-8506(07)60373-4 |
0.431 |
|
| 2006 |
Dumitrescu P, Koshy P, Stenekes J, Elbestawi MA. High-power diode laser assisted hard turning of AISI D2 tool steel International Journal of Machine Tools & Manufacture. 46: 2009-2016. DOI: 10.1016/J.Ijmachtools.2006.01.005 |
0.384 |
|
| 2006 |
Aly MF, Ng E, Veldhuis SC, Elbestawi MA. Prediction of cutting forces in the micro-machining of silicon using a “hybrid molecular dynamic-finite element analysis” force model International Journal of Machine Tools & Manufacture. 46: 1727-1739. DOI: 10.1016/J.Ijmachtools.2005.12.008 |
0.487 |
|
| 2006 |
Simoneau A, Ng E, Elbestawi MA. Surface defects during microcutting International Journal of Machine Tools & Manufacture. 46: 1378-1387. DOI: 10.1016/J.Ijmachtools.2005.10.001 |
0.363 |
|
| 2006 |
Simoneau A, Ng E, Elbestawi MA. Chip formation during microscale cutting of a medium carbon steel International Journal of Machine Tools & Manufacture. 46: 467-481. DOI: 10.1016/J.Ijmachtools.2005.07.019 |
0.412 |
|
| 2005 |
Bardetsky A, Attia H, Elbestawi M. A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys: Part 2 — Model Calibration and Verification Tribology. 173-179. DOI: 10.1115/Imece2005-80640 |
0.503 |
|
| 2005 |
Bardetsky A, Attia H, Elbestawi M. A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys: Part 1 — Model Development Tribology. 165-172. DOI: 10.1115/Imece2005-80620 |
0.469 |
|
| 2005 |
EITobgy M, Ng E, Elbestawi MA. Modelling of Abrasive Waterjet Machining: A New Approach Cirp Annals. 54: 285-288. DOI: 10.1016/S0007-8506(07)60104-8 |
0.457 |
|
| 2005 |
ElTobgy MS, Ng E, Elbestawi MA. Finite element modeling of erosive wear International Journal of Machine Tools & Manufacture. 45: 1337-1346. DOI: 10.1016/J.Ijmachtools.2005.01.007 |
0.386 |
|
| 2005 |
Deiab IM, Elbestawi MA. Experimental determination of the friction coefficient on the workpiece-fixture contact surface in workholding applications International Journal of Machine Tools & Manufacture. 45: 705-712. DOI: 10.1016/J.Ijmachtools.2004.09.021 |
0.726 |
|
| 2005 |
Elfizy AT, Bone GM, Elbestawi MA. Design and control of a dual-stage feed drive International Journal of Machine Tools & Manufacture. 45: 153-165. DOI: 10.1016/J.Ijmachtools.2004.07.008 |
0.39 |
|
| 2005 |
Kishawy HA, Dumitrescu M, Ng E-, Elbestawi MA. Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy International Journal of Machine Tools & Manufacture. 45: 219-227. DOI: 10.1016/J.Ijmachtools.2004.07.003 |
0.448 |
|
| 2005 |
Czekanski A, Elbestawi MA, Meguid SA. On the FE Modeling of Closed-cell Aluminum Foam International Journal of Mechanics and Materials in Design. 2: 23-34. DOI: 10.1007/S10999-005-0518-7 |
0.314 |
|
| 2004 |
Deiab IM, Elbestawi MA. Effect of workpiece/fixture dynamics on the machining process output Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218: 1541-1553. DOI: 10.1243/0954405042418455 |
0.385 |
|
| 2004 |
Ng E, Szablewski D, Dumitrescu M, Elbestawi MA, Sokolowski JH. High Speed Face Milling of a Aluminium Silicon Alloy Casting Cirp Annals. 53: 69-72. DOI: 10.1016/S0007-8506(07)60647-7 |
0.483 |
|
| 2004 |
Elfizy AT, Bone GM, Elbestawi MA. Model-based controller design for machine tool direct feed drives International Journal of Machine Tools & Manufacture. 44: 465-477. DOI: 10.1016/J.Ijmachtools.2003.11.005 |
0.415 |
|
| 2003 |
Tounsi N, El Wardany TI, Elbestawi MA. 302 Z-List Based Modeling of Cutting Geometry and Cutting Forces in 5-Axis Machining of Complex Surfaces Proceedings of International Conference On Leading Edge Manufacturing in 21st Century : Lem21. 2003: 421-427. DOI: 10.1299/JSMELEM.2003.421 |
0.368 |
|
| 2003 |
Tounsi N, Bailey T, Elbestawi MA. Identification of acceleration deceleration profile of feed drive systems in CNC machines International Journal of Machine Tools & Manufacture. 43: 441-451. DOI: 10.1016/S0890-6955(02)00304-8 |
0.406 |
|
| 2003 |
Tounsi N, Elbestawi MA. Optimized feed scheduling in three axes machining: Part II: Experimental validation International Journal of Machine Tools & Manufacture. 43: 269-282. DOI: 10.1016/S0890-6955(02)00234-1 |
0.452 |
|
| 2003 |
Tounsi N, Elbestawi MA. Optimized feed scheduling in three axes machining. Part I: Fundamentals of the optimized feed scheduling strategy International Journal of Machine Tools & Manufacture. 43: 253-267. DOI: 10.1016/S0890-6955(02)00233-X |
0.461 |
|
| 2003 |
Sadeghi MH, Haghighat H, Elbestawi MA. A solid modeler based ball-end milling process simulation The International Journal of Advanced Manufacturing Technology. 22: 775-785. DOI: 10.1007/S00170-002-1452-6 |
0.478 |
|
| 2002 |
Bailey T, Elbestawi MA, El-Wardany TI, Fitzpatrick P. Generic Simulation Approach for Multi-Axis Machining, Part 2: Model Calibration and Feed Rate Scheduling Journal of Manufacturing Science and Engineering-Transactions of the Asme. 124: 634-642. DOI: 10.1115/1.1468864 |
0.497 |
|
| 2002 |
Bailey T, Elbestawi MA, El-Wardany TI, Fitzpatrick P. Generic Simulation Approach for Multi-Axis Machining, Part 1: Modeling Methodology Journal of Manufacturing Science and Engineering-Transactions of the Asme. 124: 624-633. DOI: 10.1115/1.1468863 |
0.483 |
|
| 2002 |
Ng E, El-Wardany TI, Dumitrescu M, Elbestawi MA. Physics-Based Simulation Of High Speed Machining Machining Science and Technology. 6: 301-329. DOI: 10.1081/Mst-120016248 |
0.476 |
|
| 2002 |
Tounsi N, Vincenti J, Otho A, Elbestawi MA. From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation International Journal of Machine Tools & Manufacture. 42: 1373-1383. DOI: 10.1016/S0890-6955(02)00046-9 |
0.351 |
|
| 2002 |
Becze CE, Elbestawi MA. A chip formation based analytic force model for oblique cutting International Journal of Machine Tools & Manufacture. 42: 529-538. DOI: 10.1016/S0890-6955(01)00129-8 |
0.433 |
|
| 2002 |
Elbestawi MA, Veldhuis SC, Deiab IM, Habel MJ, Roberts C. Development of a Novel Modular and Agile Face Machining Technology Cirp Annals. 51: 307-310. DOI: 10.1016/S0007-8506(07)61523-6 |
0.723 |
|
| 2001 |
Abrari F, Elbestawi MA, Spence AD. On machining dynamics of flexible parts Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics. 215: 53-59. DOI: 10.1243/1464419011544349 |
0.42 |
|
| 2001 |
Kishawy HA, Elbestawi MA. Tool wear and surface integrity during high-speed turning of hardened steel with polycrystalline cubic boron nitride tools Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215: 755-767. DOI: 10.1243/0954405011518700 |
0.364 |
|
| 2001 |
Imani BM, Elbestawi MA. Geometric Simulation of Ball-End Milling Operations Journal of Manufacturing Science and Engineering-Transactions of the Asme. 123: 177-184. DOI: 10.1115/1.1347034 |
0.387 |
|
| 2001 |
Tounsi N, Elbestawi MA. Enhancement Of Productivity By Intelligent Programming Of Feed Rate In 3-Axis Milling Machining Science and Technology. 5: 393-414. DOI: 10.1081/Mst-100108622 |
0.433 |
|
| 2001 |
Renton D, Elbestawi MA. Motion control for linear motor feed drives in advanced machine tools International Journal of Machine Tools & Manufacture. 41: 479-507. DOI: 10.1016/S0890-6955(00)00089-4 |
0.437 |
|
| 2000 |
El-Wardany TI, Kishawy HA, Elbestawi MA. Surface Integrity of Die Material in High Speed Hard Machining, Part 2: Microhardness Variations and Residual Stresses Journal of Manufacturing Science and Engineering-Transactions of the Asme. 122: 632-641. DOI: 10.1115/1.1286557 |
0.443 |
|
| 2000 |
El-Wardany TI, Kishawy HA, Elbestawi MA. Surface Integrity of Die Material in High Speed Hard Machining, Part 1: Micrographical Analysis Journal of Manufacturing Science and Engineering-Transactions of the Asme. 122: 620-631. DOI: 10.1115/1.1286367 |
0.477 |
|
| 2000 |
Barakat NA, Elbestawi MA, Spence AD. Kinematic and geometric error compensation of a coordinate measuring machine International Journal of Machine Tools & Manufacture. 40: 833-850. DOI: 10.1016/S0890-6955(99)00098-X |
0.344 |
|
| 2000 |
Becze CE, Clayton P, Chen L, El-Wardany TI, Elbestawi MA. High-speed five-axis milling of hardened tool steel International Journal of Machine Tools & Manufacture. 40: 869-885. DOI: 10.1016/S0890-6955(99)00092-9 |
0.518 |
|
| 2000 |
Renton D, Elbestawi MA. High speed servo control of multi-axis machine tools International Journal of Machine Tools & Manufacture. 40: 539-559. DOI: 10.1016/S0890-6955(99)00075-9 |
0.464 |
|
| 2000 |
Barakat NA, Spence AD, Elbestawi MA. Adaptive compensation of quasi-static errors for an intrinsic machine International Journal of Machine Tools & Manufacture. 40: 2267-2291. DOI: 10.1016/S0890-6955(00)00038-9 |
0.396 |
|
| 2000 |
Spence AD, Abrari F, Elbestawi MA. Integrated solid modeller based solutions for machining Computer-Aided Design. 32: 553-568. DOI: 10.1016/S0010-4485(00)00042-7 |
0.455 |
|
| 1999 |
Kishawy HA, Elbestawi MA. Effects of process parameters on material side flow during hard turning International Journal of Machine Tools & Manufacture. 39: 1017-1030. DOI: 10.1016/S0890-6955(98)00084-4 |
0.386 |
|
| 1998 |
Mounayri HE, Spence AD, Elbestawi MA. Milling process simulation : A generic solid modeller based paradigm Journal of Manufacturing Science and Engineering-Transactions of the Asme. 120: 213-221. DOI: 10.1115/1.2830116 |
0.476 |
|
| 1998 |
Shawky AM, Elbestawi MA. Model-Based Predictive Control of Workpiece Accuracy in Bar Turning Journal of Manufacturing Science and Engineering-Transactions of the Asme. 120: 57-67. DOI: 10.1115/1.2830111 |
0.392 |
|
| 1998 |
El-Wardany TI, Elbestawi MA. Phenomenological Analysis Of Material Side Flow In Hard Turning: Causes, Modeling, And Elimination Machining Science and Technology. 2: 239-251. DOI: 10.1080/10940349808945670 |
0.338 |
|
| 1998 |
Shawky A, Rosenberger T, Elbestawi M. In-process monitoring and control of thickness error in machining hollow shafts Mechatronics. 8: 301-322. DOI: 10.1016/S0957-4158(97)00064-0 |
0.451 |
|
| 1998 |
Imani BM, Sadeghi MH, Elbestawi MA. An improved process simulation system for ball-end milling of sculptured surfaces International Journal of Machine Tools & Manufacture. 38: 1089-1107. DOI: 10.1016/S0890-6955(97)00074-6 |
0.476 |
|
| 1998 |
Abrari F, Elbestawi MA, Spence AD. On the dynamics of ball end milling: modeling of cutting forces and stability analysis International Journal of Machine Tools & Manufacture. 38: 215-237. DOI: 10.1016/S0890-6955(97)00039-4 |
0.466 |
|
| 1997 |
Shawky AM, Elbestawi MA. An Enhanced Dynamic Model in Turning Including the Effect of Ploughing Forces Journal of Manufacturing Science and Engineering-Transactions of the Asme. 119: 10-20. DOI: 10.1115/1.2836546 |
0.483 |
|
| 1997 |
Abrari F, Elbestawi MA. Closed form formulation of cutting forces for ball and flat end mills International Journal of Machine Tools & Manufacture. 37: 17-27. DOI: 10.1016/S0890-6955(96)00018-1 |
0.393 |
|
| 1997 |
Elbestawi MA, Chen L, Becze CE, El-Wardany TI. High-Speed Milling of Dies and Molds in Their Hardened State Cirp Annals. 46: 57-62. DOI: 10.1016/S0007-8506(07)60775-6 |
0.476 |
|
| 1997 |
El-Mounayri H, Elbestawi MA, Spence AD, Bedi S. General geometric modelling approach for machining process simulation The International Journal of Advanced Manufacturing Technology. 13: 237-247. DOI: 10.1007/Bf01179605 |
0.48 |
|
| 1997 |
Wardany TIE, Elbestawi MA. Prediction of Tool Failure Rate in Turning Hardened Steels The International Journal of Advanced Manufacturing Technology. 13: 1-16. DOI: 10.1007/Bf01179225 |
0.398 |
|
| 1996 |
Bone GM, Elbestawi MA. Dual-Sensor Based Robotic Deburring Journal of Manufacturing Science and Engineering-Transactions of the Asme. 118: 439-441. DOI: 10.1115/1.2831050 |
0.316 |
|
| 1996 |
Li S, Elbestawi MA. Tool Condition Monitoring in Machining by Fuzzy Neural Networks Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 118: 665-672. DOI: 10.1115/1.2802341 |
0.349 |
|
| 1996 |
Elbestawi MA, Srivastava AK, El-Wardany TI. A Model for Chip Formation During Machining of Hardened Steel Cirp Annals. 45: 71-76. DOI: 10.1016/S0007-8506(07)63019-4 |
0.336 |
|
| 1996 |
Shawky AM, Elbestawi MA. In-process evaluation of workpiece geometrical tolerances in bar turning International Journal of Machine Tools & Manufacture. 36: 33-46. DOI: 10.1016/0890-6955(95)92627-B |
0.355 |
|
| 1996 |
El-Wardany TI, Gao D, Elbestawi MA. Tool condition monitoring in drilling using vibration signature analysis International Journal of Machine Tools & Manufacture. 36: 687-711. DOI: 10.1016/0890-6955(95)00058-5 |
0.352 |
|
| 1996 |
El-Wardany TI, Mohammed E, Elbestawi MA. Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials International Journal of Machine Tools & Manufacture. 36: 611-634. DOI: 10.1016/0890-6955(95)00043-7 |
0.449 |
|
| 1996 |
Li S, Elbestawi MA. Fuzzy Clustering For Automated Tool Condition Monitoring In Machining Mechanical Systems and Signal Processing. 10: 533-550. DOI: 10.1006/Mssp.1996.0037 |
0.311 |
|
| 1995 |
Du R, Elbestawi MA, Wu SM. Automated Monitoring of Manufacturing Processes, Part 2: Applications Journal of Engineering For Industry. 117: 133-141. DOI: 10.1115/1.2803287 |
0.352 |
|
| 1995 |
Du R, Elbestawi MA, Wu SM. Automated Monitoring of Manufacturing Processes, Part 1: Monitoring Methods Journal of Engineering For Industry. 117: 121-132. DOI: 10.1115/1.2803286 |
0.302 |
|
| 1995 |
Veldhuis SC, Elbestawi MA. A Strategy for the Compensation of Errors in Five-Axis Machining Cirp Annals. 44: 373-377. DOI: 10.1016/S0007-8506(07)62345-2 |
0.333 |
|
| 1995 |
Yan D, El-Wardany TI, Elbestawi MA. A multi-sensor strategy for tool failure detection in milling International Journal of Machine Tools & Manufacture. 35: 383-398. DOI: 10.1016/0890-6955(94)E0021-A |
0.406 |
|
| 1995 |
Yu S, Elbestawi MA. Modelling and dynamic analysis of a two-link manipulator with both joint and link flexibilities Journal of Sound and Vibration. 179: 839-854. DOI: 10.1006/Jsvi.1995.0056 |
0.313 |
|
| 1994 |
Elbestawi MA, Ismail F, Du R, Ullagaddi BC. Modelling Machining Dynamics Including Damping in the Tool-Workpiece Interface Journal of Engineering For Industry. 116: 435-439. DOI: 10.1115/1.2902125 |
0.496 |
|
| 1994 |
Bone GM, Elbestawi MA. Sensing and control for automated robotic edge deburring Ieee Transactions On Industrial Electronics. 41: 137-146. DOI: 10.1109/41.293873 |
0.334 |
|
| 1994 |
Elbestawi MA, Ismail F, Yuen KM. Surface topography characterization in finish milling International Journal of Machine Tools & Manufacture. 34: 245-255. DOI: 10.1016/0890-6955(94)90104-X |
0.487 |
|
| 1993 |
Ismail F, Elbestawi MA, Du R, Urbasik K. Generation of Milled Surfaces Including Tool Dynamics and Wear Journal of Engineering For Industry. 115: 245-252. DOI: 10.1115/1.2901656 |
0.378 |
|
| 1993 |
Teltz R, Elbestawi MA. Hierarchical, knowledge-based control in turning Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 115: 122-132. DOI: 10.1115/1.2897386 |
0.386 |
|
| 1993 |
Srivastava AK, Rogers DB, Elbestawi MA. Optimal planning of an adaptively controlled robotic disk grinding process International Journal of Machine Tools and Manufacture. 33: 809-825. DOI: 10.1016/0890-6955(93)90039-W |
0.357 |
|
| 1993 |
Dai H, Yuen KM, Elbestawi MA. Parametric modelling and control of the robotic grinding process The International Journal of Advanced Manufacturing Technology. 8: 182-192. DOI: 10.1007/Bf01749909 |
0.383 |
|
| 1992 |
Elbestawi MA, Bone GM, Tern PW. An Automated Planning, Control, and Inspection System for Robotic Deburring Cirp Annals. 41: 397-401. DOI: 10.1016/S0007-8506(07)61230-X |
0.358 |
|
| 1992 |
Srivastava AK, Rogers DB, Elbestawi MA. Workpiece burn and surface finish during controlled force robotic disk grinding International Journal of Machine Tools and Manufacture. 32: 797-809. DOI: 10.1016/0890-6955(92)90032-C |
0.437 |
|
| 1992 |
Du RX, Elbestawi MA, Li S. Tool condition monitoring in turning using fuzzy set theory International Journal of Machine Tools & Manufacture. 32: 781-796. DOI: 10.1016/0890-6955(92)90031-B |
0.376 |
|
| 1992 |
Srivastava AK, Yuen KM, Elbestawi MA. Surface finish in robotic disk grinding International Journal of Machine Tools & Manufacture. 32: 269-279. DOI: 10.1016/0890-6955(92)90001-W |
0.378 |
|
| 1992 |
Du R, Elbestawi MA, Ullagaddi BC. Chatter detection in milling based on the probability distribution of cutting force signal Mechanical Systems and Signal Processing. 6: 345-362. DOI: 10.1016/0888-3270(92)90036-I |
0.361 |
|
| 1992 |
Ulrich BJ, Srivastava AK, Elbestawi MA. Analysis of the robotic disc grinding process The International Journal of Advanced Manufacturing Technology. 7: 82-92. DOI: 10.1007/Bf02601574 |
0.353 |
|
| 1991 |
Elbestawi MA, Yuen KM, Srivastava AK, Dai H. Adaptive Force Control for Robotic Disk Grinding Cirp Annals. 40: 391-394. DOI: 10.1016/S0007-8506(07)62014-9 |
0.361 |
|
| 1991 |
Elbestawi MA, Sagherian R. Dynamic modeling for the prediction of surface errors in the milling of thin-walled sections Journal of Materials Processing Technology. 25: 215-228. DOI: 10.1016/0924-0136(91)90090-2 |
0.422 |
|
| 1991 |
Elbestawi MA, Papazafiriou TA, Du RX. In-process monitoring of tool wear in milling using cutting force signature International Journal of Machine Tools & Manufacture. 31: 55-73. DOI: 10.1016/0890-6955(91)90051-4 |
0.428 |
|
| 1991 |
Bone GM, Elbestawi MA. Active end effector control of a low precision robot in deburring Robotics and Computer-Integrated Manufacturing. 8: 87-96. DOI: 10.1016/0736-5845(91)90024-M |
0.356 |
|
| 1991 |
Elbestawi MA, Liu L, Sinha NK. Some advanced control strategies for modern machine tools Computers in Industry. 16: 47-57. DOI: 10.1016/0166-3615(91)90008-W |
0.429 |
|
| 1991 |
Abdel-Rahman TM, Elbestawi MA. Synthesis and dynamics of statically balanced direct-drive manipulators with decoupled inertia tensors Mechanism and Machine Theory. 26: 389-402. DOI: 10.1016/0094-114X(91)90010-2 |
0.32 |
|
| 1990 |
Elbestawi MA, Mohamed Y, Liu L. Application of Some Parameter Adaptive Control Algorithms in Machining Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 112: 611-617. DOI: 10.1115/1.2896186 |
0.419 |
|
| 1990 |
Abdel-Rahman TM, Elbestawi MA. Design of a compact statically balanced direct-drive manipulator Robotica. 8: 347-353. DOI: 10.1017/S0263574700000473 |
0.332 |
|
| 1990 |
Bone GM, Elbestawi MA, Liu L, Sinha NK. Adaptive Robotic Deburring Ifac Proceedings Volumes. 23: 313-318. DOI: 10.1016/S1474-6670(17)52739-1 |
0.381 |
|
| 1990 |
Srivastava AK, Ulrich BJ, Elbestawi MA. Analysis of rigid-disk wear during robotic grinding International Journal of Machine Tools & Manufacture. 30: 521-534. DOI: 10.1016/0890-6955(90)90004-3 |
0.359 |
|
| 1990 |
Sagherian R, Elbestawi MA. A simulation system for improving machining accuracy in milling Computers in Industry. 14: 293-305. DOI: 10.1016/0166-3615(90)90037-P |
0.526 |
|
| 1989 |
Dokainish M, Elbestawi M, Polat U, Tole B. Analysis of stresses during exit in interrupted cutting with champfered tools International Journal of Machine Tools and Manufacture. 29: 519-534. DOI: 10.1016/0890-6955(89)90069-2 |
0.389 |
|
| 1989 |
Elbestawi MA, Marks J, Papazafiriou T. Process monitoring in milling by pattern recognition Mechanical Systems and Signal Processing. 3: 305-315. DOI: 10.1016/0888-3270(89)90055-1 |
0.442 |
|
| 1989 |
Papazafiriou TA, Elbestawi MA. Flank wear modeling in milling Journal of Mechanical Working Technology. 20: 93-104. DOI: 10.1016/0378-3804(89)90021-1 |
0.353 |
|
| 1989 |
Liu L, Elbestawi MA, Sinha NK. Surface accuracy control in end milling using adaptive state tracking Computers in Industry. 11: 289-300. DOI: 10.1016/0166-3615(89)90128-0 |
0.396 |
|
| 1989 |
Liu L, Sinha NK, Elbestawi MA. Adaptive control for geometric tracking in turning Computers in Industry. 11: 147-159. DOI: 10.1016/0166-3615(89)90102-4 |
0.4 |
|
| 1987 |
Elbestawi MA, Sagherian R. Parameter adaptive control in peripheral milling International Journal of Machine Tools & Manufacture. 27: 399-414. DOI: 10.1016/S0890-6955(87)80012-3 |
0.415 |
|
| Show low-probability matches. |
