| Year |
Citation |
Score |
| 2018 |
Sheng X, Menq CH, Tao T. Active damping and disturbance rejection control of a six-axis magnetic levitation stage. The Review of Scientific Instruments. 89: 075109. PMID 30068148 DOI: 10.1063/1.5010432 |
0.418 |
|
| 2018 |
Cheng P, Menq C. Visual Tracking of Six-Axis Motion Rendering Ultraprecise Visual Servoing of Microscopic Objects Ieee/Asme Transactions On Mechatronics. 23: 1564-1572. DOI: 10.1109/Tmech.2018.2842155 |
0.374 |
|
| 2017 |
Cheng P, Jhiang SM, Menq CH. Modeling and calibrating nonlinearity and crosstalk in back focal plane interferometry for three-dimensional position detection. Optics Letters. 42: 3948-3951. PMID 28957168 DOI: 10.1364/Ol.42.003948 |
0.374 |
|
| 2017 |
Cheng P, Menq C. Ultraprecise Three-Axis Visual Motion Tracking of Microscopic Objects Ieee Transactions On Instrumentation and Measurement. 66: 2597-2605. DOI: 10.1109/Tim.2017.2712939 |
0.349 |
|
| 2016 |
Long F, Matsuura D, Menq C. Actively Controlled Hexapole Electromagnetic Actuating System Enabling 3-D Force Manipulation in Aqueous Solutions Ieee/Asme Transactions On Mechatronics. 21: 1540-1551. DOI: 10.1109/Tmech.2015.2503274 |
0.378 |
|
| 2016 |
Liu Z, Jeong Y, Menq C. Real-Time Reconstruction of Multimode Tip Motion of Microcantilevers in Dynamic Atomic Force Microscopy Ieee/Asme Transactions On Mechatronics. 21: 825-837. DOI: 10.1109/Tmech.2015.2472557 |
0.363 |
|
| 2014 |
Jayanth GR, Menq CH. Design and Modeling of an Active Five-Axis Compliant Micromanipulator Journal of Mechanisms and Robotics. 6. DOI: 10.1115/1.4027947 |
0.322 |
|
| 2013 |
Cheng P, Jhiang SM, Menq CH. Real-time visual sensing system achieving high-speed 3D particle tracking with nanometer resolution. Applied Optics. 52: 7530-9. PMID 24216655 DOI: 10.1364/Ao.52.007530 |
0.356 |
|
| 2013 |
Liu Z, Jeong Y, Menq CH. Calibration of measurement sensitivities of multiple micro-cantilever dynamic modes in atomic force microscopy using a contact detection method. The Review of Scientific Instruments. 84: 023703. PMID 23464214 DOI: 10.1063/1.4790194 |
0.372 |
|
| 2013 |
Cheng P, Menq CH. Real-time continuous image registration enabling ultraprecise 2-D motion tracking. Ieee Transactions On Image Processing : a Publication of the Ieee Signal Processing Society. 22: 2081-90. PMID 23380857 DOI: 10.1109/Tip.2013.2244608 |
0.358 |
|
| 2013 |
Zhang Z, Long F, Menq C. Three-Dimensional Visual Servo Control of a Magnetically Propelled Microscopic Bead Ieee Transactions On Robotics. 29: 373-382. DOI: 10.1109/Tro.2012.2229671 |
0.354 |
|
| 2013 |
Jayanth GR, Menq C. Two-Axis Force Sensing and Control of a Reorientable Scanning Probe Ieee/Asme Transactions On Mechatronics. 18: 687-696. DOI: 10.1109/Tmech.2012.2183145 |
0.356 |
|
| 2013 |
Cheng P, Menq C. Cancelling bias induced by correlation coefficient interpolation for sub-pixel image registration Measurement Science and Technology. 24: 035404. DOI: 10.1088/0957-0233/24/3/035404 |
0.315 |
|
| 2012 |
Jayanth GR, Menq C. Tip Motion Control and Scanning of a Reorientable Micromanipulator With Axially Located Tip Ieee/Asme Transactions On Mechatronics. 17: 801-810. DOI: 10.1109/Tmech.2011.2136382 |
0.408 |
|
| 2011 |
Huang Y, Cheng P, Menq CH. Dynamic Force Sensing Using an Optically Trapped Probing System. Ieee/Asme Transactions On Mechatronics : a Joint Publication of the Ieee Industrial Electronics Society and the Asme Dynamic Systems and Control Division. 16. PMID 24382944 DOI: 10.1109/Tmech.2010.2082557 |
0.378 |
|
| 2011 |
Zhang Z, Menq CH. Design and Modeling of a 3-D Magnetic Actuator for Magnetic Microbead Manipulation. Ieee/Asme Transactions On Mechatronics : a Joint Publication of the Ieee Industrial Electronics Society and the Asme Dynamic Systems and Control Division. 16. PMID 24382943 DOI: 10.1109/Tmech.2011.2105500 |
0.322 |
|
| 2010 |
Zhang Z, Shi Y, Jhiang SM, Menq CH. Mechanical anisotropy and adaptation of metastatic cells probed by magnetic microbeads Progress in Biomedical Optics and Imaging - Proceedings of Spie. 7568. DOI: 10.1117/12.842086 |
0.323 |
|
| 2010 |
Zhang Z, Huang Y, Menq C. Actively Controlled Manipulation of a Magnetic Microbead Using Quadrupole Magnetic Tweezers Ieee Transactions On Robotics. 26: 531-541. DOI: 10.1109/Tro.2010.2047526 |
0.393 |
|
| 2010 |
Jeong Y, Jayanth GR, Jhiang SM, Menq CH. Design and fabrication of an active multiaxis probing system for high speed atomic force microscopy Ieee Transactions On Nanotechnology. 9: 392-399. DOI: 10.1109/Tnano.2009.2029333 |
0.34 |
|
| 2010 |
Zhang Z, Huang K, Menq C. Design, Implementation, and Force Modeling of Quadrupole Magnetic Tweezers Ieee-Asme Transactions On Mechatronics. 15: 704-713. DOI: 10.1109/Tmech.2009.2032179 |
0.321 |
|
| 2010 |
Jayanth GR, Menq C. Control of a Two-Axis Micromanipulator-Based Scanning Probe System for 2.5-D Nanometrology Ieee-Asme Transactions On Mechatronics. 15: 661-670. DOI: 10.1109/Tmech.2009.2031595 |
0.374 |
|
| 2010 |
Jayanth GR, Menq C. Modeling and Design of a Magnetically Actuated Two-Axis Compliant Micromanipulator for Nanomanipulation Ieee-Asme Transactions On Mechatronics. 15: 360-370. DOI: 10.1109/Tmech.2009.2026170 |
0.421 |
|
| 2009 |
Huang Y, Zhang Z, Menq CH. Minimum-variance Brownian motion control of an optically trapped probe. Applied Optics. 48: 5871-80. PMID 19844327 DOI: 10.1364/Ao.48.005871 |
0.393 |
|
| 2009 |
Wan J, Huang Y, Jhiang S, Menq CH. Real-time in situ calibration of an optically trapped probing system. Applied Optics. 48: 4832-41. PMID 19724324 DOI: 10.1364/Ao.48.004832 |
0.315 |
|
| 2009 |
Huang Y, Wan J, Cheng MC, Zhang Z, Jhiang SM, Menq CH. Three-axis rapid steering of optically propelled micro/nanoparticles. The Review of Scientific Instruments. 80: 063107. PMID 19566196 DOI: 10.1063/1.3156838 |
0.346 |
|
| 2009 |
Zhang Z, Menq CH. Best linear unbiased axial localization in three-dimensional fluorescent bead tracking with subnanometer resolution using off-focus images. Journal of the Optical Society of America. a, Optics, Image Science, and Vision. 26: 1484-93. PMID 19488188 DOI: 10.1364/Josaa.26.001484 |
0.35 |
|
| 2009 |
Cigeroglu E, An NACH, Menq CH. Forced response prediction of constrained and unconstrained structures coupled through frictional contacts Journal of Engineering For Gas Turbines and Power. 131. DOI: 10.1115/1.2940356 |
0.419 |
|
| 2009 |
Kim JH, Menq C. Visual Servo Control Achieving Nanometer Resolution in $X$ – $Y$ – $Z$ Ieee Transactions On Robotics. 25: 109-116. DOI: 10.1109/Tro.2008.2003267 |
0.36 |
|
| 2008 |
Zhang Z, Menq CH. Three-dimensional particle tracking with subnanometer resolution using off-focus images. Applied Optics. 47: 2361-70. PMID 18449301 DOI: 10.1364/Ao.47.002361 |
0.345 |
|
| 2008 |
Hu K, Kim JH, Schmiedeler J, Menq CH. Design, implementation, and control of a six-axis compliant stage. The Review of Scientific Instruments. 79: 025105. PMID 18315327 DOI: 10.1063/1.2841804 |
0.381 |
|
| 2008 |
Jayanth GR, Jhiang SM, Menq CH. Two-axis probing system for atomic force microscopy. The Review of Scientific Instruments. 79: 023705. PMID 18315303 DOI: 10.1063/1.2841805 |
0.379 |
|
| 2008 |
Kim JH, Menq C. Visually Servoed 3-D Alignment of Multiple Objects with Subnanometer Precision Ieee Transactions On Nanotechnology. 7: 321-330. DOI: 10.1109/Tnano.2007.914997 |
0.348 |
|
| 2007 |
Jeong Y, Jayanth GR, Menq CH. Control of tip-to-sample distance in atomic force microscopy: a dual-actuator tip-motion control scheme. The Review of Scientific Instruments. 78: 093706. PMID 17902954 DOI: 10.1063/1.2785158 |
0.413 |
|
| 2007 |
Zhang Z, Menq CH. Laser interferometric system for six-axis motion measurement. The Review of Scientific Instruments. 78: 083107. PMID 17764313 DOI: 10.1063/1.2776011 |
0.36 |
|
| 2007 |
Cigeroglu E, An N, Menq CH. Wedge damper modeling and forced response prediction of frictionally constrained blades Proceedings of the Asme Turbo Expo. 5: 519-528. DOI: 10.1115/GT2007-27963 |
0.34 |
|
| 2007 |
Zhang Z, Menq C. Six-Axis Magnetic Levitation and Motion Control Ieee Transactions On Robotics. 23: 196-205. DOI: 10.1109/Tro.2007.892232 |
0.421 |
|
| 2007 |
Cigeroglu E, An N, Menq CH. A microslip friction model with normal load variation induced by normal motion Nonlinear Dynamics. 50: 609-626. DOI: 10.1007/S11071-006-9171-4 |
0.456 |
|
| 2006 |
Huang Y, Menq C. Design and development of a large range linear encoder with subnanometer resolution Review of Scientific Instruments. 77: 105104. DOI: 10.1063/1.2358694 |
0.382 |
|
| 2006 |
Jeong Y, Jayanth GR, Jhiang SM, Menq CH. Direct tip-sample interaction force control for the dynamic mode atomic force microscopy Applied Physics Letters. 88. DOI: 10.1063/1.2203958 |
0.352 |
|
| 2006 |
Jayanth GR, Jeong Y, Menq C. Direct tip-position control using magnetic actuation for achieving fast scanning in tapping mode atomic force microscopy Review of Scientific Instruments. 77: 053704. DOI: 10.1063/1.2200874 |
0.388 |
|
| 2006 |
Cigeroglu E, Lu W, Menq C. One-dimensional dynamic microslip friction model Journal of Sound and Vibration. 292: 881-898. DOI: 10.1016/J.Jsv.2005.09.019 |
0.59 |
|
| 2005 |
Kim JH, Kuo S, Menq C. An ultraprecision six-axis visual servo-control system Ieee Transactions On Robotics. 21: 985-993. DOI: 10.1109/Tro.2005.847571 |
0.533 |
|
| 2005 |
Kuo S, Menq C. Modeling and Control of a Six-Axis Precision Motion Control Stage Ieee/Asme Transactions On Mechatronics. 10: 50-59. DOI: 10.1109/Tmech.2004.842219 |
0.578 |
|
| 2003 |
Kuo S, Shan X, Menq C. Large travel ultra precision x-y-/spl theta/ motion control of a magnetic-suspension stage Ieee-Asme Transactions On Mechatronics. 8: 334-341. DOI: 10.1109/Tmech.2003.816825 |
0.698 |
|
| 2002 |
Huang J, Menq C. Automatic CAD Model Reconstruction from Multiple Point Clouds for Reverse Engineering Journal of Computing and Information Science in Engineering. 2: 160-170. DOI: 10.1115/1.1529210 |
0.677 |
|
| 2002 |
Huang J, Menq C. Identification and Characterization of Regular Surfaces from Unorganized Points by Normal Sensitivity Analysis Journal of Computing and Information Science in Engineering. 2: 115-124. DOI: 10.1115/1.1509075 |
0.68 |
|
| 2002 |
Su X, Menq CH, Houser DR. Estimation of reference misalionment of a spur gear and its application to profile and lead measurement Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 333-340. DOI: 10.1115/1.1455029 |
0.312 |
|
| 2002 |
Shan X, Menq CH. Robust disturbance rejection for improved dynamic stiffness of a magnetic suspension stage Ieee/Asme Transactions On Mechatronics. 7: 289-295. DOI: 10.1109/Tmech.2002.802719 |
0.634 |
|
| 2002 |
Shan X, Kuo S, Zhang J, Menq C. Ultra precision motion control of a multiple degrees of freedom magnetic suspension stage Ieee-Asme Transactions On Mechatronics. 7: 67-78. DOI: 10.1109/3516.990889 |
0.7 |
|
| 2002 |
Huang J, Menq C. Combinatorial manifold mesh reconstruction and optimization from unorganized points with arbitrary topology Computer-Aided Design. 34: 149-165. DOI: 10.1016/S0010-4485(01)00079-3 |
0.663 |
|
| 2001 |
Chen JJ, Menq CH. Periodic response of blades having three-dimensional nonlinear shroud constraints Journal of Engineering For Gas Turbines and Power. 123: 901-909. DOI: 10.1115/1.1385828 |
0.317 |
|
| 2001 |
Shen T, Huang J, Menq C. Multiple-Sensor Planning and Information Integration for Automatic Coordinate Metrology Journal of Computing and Information Science in Engineering. 1: 167-179. DOI: 10.1115/1.1385827 |
0.676 |
|
| 2000 |
Shen T, Menq C. Digital Projector Calibration for 3-D Active Vision Systems Journal of Manufacturing Science and Engineering. 124: 126-134. DOI: 10.1115/1.1418694 |
0.508 |
|
| 2000 |
Menq C, Zhang J, Shi J. Design and development of an interferometer with improved angular tolerance and its application to x–y theta measurement Review of Scientific Instruments. 71: 4633. DOI: 10.1063/1.1326058 |
0.328 |
|
| 1999 |
Chen JJ, Menq CH. Prediction of periodic response of blades having 3D nonlinear shroud constraints Proceedings of the Asme Turbo Expo. 4. DOI: 10.1115/99-GT-289 |
0.301 |
|
| 1999 |
Yang BD, Chen JJ, Menq CH. Prediction of Resonant Response of Shrouded Blades With Three-Dimensional Shroud Constraint Journal of Engineering For Gas Turbines and Power. 121: 523-529. DOI: 10.1115/1.2818504 |
0.316 |
|
| 1999 |
Zhang J, Menq C. A linear/angular interferometer capable of measuring large angular motion Measurement Science and Technology. 10: 1247-1253. DOI: 10.1088/0957-0233/10/12/317 |
0.352 |
|
| 1999 |
Yan Z, Menq C. Uncertainty analysis and variation reduction of three dimensional coordinate metrology. Part 3: variation reduction International Journal of Machine Tools and Manufacture. 39: 1239-1261. DOI: 10.1016/S0890-6955(98)00091-1 |
0.337 |
|
| 1999 |
Yan Z, Menq C. Uncertainty analysis and variation reduction of three-dimensional coordinate metrology. Part 2: uncertainty analysis International Journal of Machine Tools and Manufacture. 39: 1219-1238. DOI: 10.1016/S0890-6955(98)00090-X |
0.336 |
|
| 1999 |
Yan Z, Yang B, Menq C. Uncertainty analysis and variation reduction of three dimensional coordinate metrology. Part 1: geometric error decomposition International Journal of Machine Tools and Manufacture. 39: 1199-1217. DOI: 10.1016/S0890-6955(98)00089-3 |
0.315 |
|
| 1997 |
Lim EM, Menq C. Error Compensation for Sculptured Surface Productions by the Application of Control-Surface Strategy Using Predicted Machining Errors Journal of Manufacturing Science and Engineering. 119: 402-409. DOI: 10.1115/1.2831120 |
0.378 |
|
| 1997 |
Mittal S, Menq C. Precision motion control of a magnetic suspension actuator using a robust nonlinear compensation scheme Ieee-Asme Transactions On Mechatronics. 2: 268-280. DOI: 10.1109/3516.653051 |
0.435 |
|
| 1997 |
Meng Lim E, Menq C, Yen DW. Integrated planning for precision machining of complex surfaces—III. Compensation of dimensionai errors International Journal of Machine Tools and Manufacture. 37: 1313-1326. DOI: 10.1016/S0890-6955(95)00111-5 |
0.358 |
|
| 1997 |
Meng Lim E, Menq C, Yen DW. Integrated planning for precision machining of complex surfaces. Part 2: Application to the machining of a turbine blade die International Journal of Machine Tools and Manufacture. 37: 77-91. DOI: 10.1016/0890-6955(95)00110-7 |
0.318 |
|
| 1997 |
Meng Lim E, Menq C. Integrated planning for precision machining of complex surfaces. Part 1: Cutting-path and feedrate optimization International Journal of Machine Tools and Manufacture. 37: 61-75. DOI: 10.1016/0890-6955(95)00109-3 |
0.362 |
|
| 1996 |
Feng H, Menq C. A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction Journal of Manufacturing Science and Engineering. 118: 461-469. DOI: 10.1115/1.2831055 |
0.348 |
|
| 1996 |
Yau H, Menq C. A unified least-squares approach to the evaluation of geometric errors using discrete measurement data International Journal of Machine Tools and Manufacture. 36: 1269-1290. DOI: 10.1016/0890-6955(95)00075-5 |
0.34 |
|
| 1995 |
XIA JZ, MENQ C. Precision tracking control of non-minimum phase systems with zero phase error International Journal of Control. 61: 791-807. DOI: 10.1080/00207179508921931 |
0.361 |
|
| 1995 |
Yau H, Menq C. Automated CMM path planning for dimensional inspection of dies and molds having complex surfaces International Journal of Machine Tools and Manufacture. 35: 861-876. DOI: 10.1016/0890-6955(94)E0024-D |
0.329 |
|
| 1995 |
Lim EM, Menq CH. The prediction of dimensional error for sculptured surface productions using the ball-end milling process. Part 2: Surface generation model and experimental verification International Journal of Machine Tools and Manufacture. 35: 1171-1185. DOI: 10.1016/0890-6955(94)00045-L |
0.362 |
|
| 1995 |
Lim EM, Feng H, Menq C, Lin Z. The prediction of dimensional error for sculptured surface productions using the ball-end milling process. Part 1: Chip geometry analysis and cutting force prediction International Journal of Machine Tools & Manufacture. 35: 1149-1169. DOI: 10.1016/0890-6955(94)00044-K |
0.355 |
|
| 1994 |
Feng H, Menq C. The prediction of cutting forces in the ball-end milling process—II. Cut geometry analysis and model verification International Journal of Machine Tools and Manufacture. 34: 711-719. DOI: 10.1016/0890-6955(94)90053-1 |
0.329 |
|
| 1994 |
Feng H, Menq C. The prediction of cutting forces in the ball-end milling process—I. Model formulation and model building procedure International Journal of Machine Tools and Manufacture. 34: 697-710. DOI: 10.1016/0890-6955(94)90052-3 |
0.356 |
|
| 1993 |
Xia JZ, Menq C. Real Time Estimation of Elastic Deformation for End-Point Tracking Control of Flexible Two-Link Manipulators Journal of Dynamic Systems, Measurement, and Control. 115: 385-393. DOI: 10.1115/1.2899114 |
0.402 |
|
| 1993 |
Menq C, Xia JZ. Experiments on the Tracking Control of a Flexible One-Link Manipulator Journal of Dynamic Systems, Measurement, and Control. 115: 306-308. DOI: 10.1115/1.2899036 |
0.369 |
|
| 1993 |
Menq C, Chen J. Precision Tracking Control of Discrete Time Nonminimum-Phase Systems Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 115: 238-245. DOI: 10.1115/1.2899027 |
0.316 |
|
| 1993 |
MENQ C, XIA JZ. Characterization and compensation of discrete-time non-minimum-phase systems for precision tracking control International Journal of Systems Science. 24: 1189-1205. DOI: 10.1080/00207729308949552 |
0.359 |
|
| 1993 |
YAU H, MENQ C. Concurrent process planning for finish milling and dimensional inspection of sculptured surfaces in die and mould manufacturing International Journal of Production Research. 31: 2709-2725. DOI: 10.1080/00207549308956892 |
0.31 |
|
| 1993 |
Yang B, Menq C. Compensation for form error of end-milled sculptured surfaces using discrete measurement data International Journal of Machine Tools and Manufacture. 33: 725-740. DOI: 10.1016/0890-6955(93)90103-2 |
0.338 |
|
| 1992 |
Menq C, Yau H, Wong C. An Intelligent Planning Environment for Automated Dimensional Inspection Using Coordinate Measuring Machines Journal of Engineering For Industry. 114: 222-230. DOI: 10.1115/1.2899775 |
0.317 |
|
| 1991 |
Sahoo KC, Menq C. Localization of 3-D Objects Having Complex Sculptured Surfaces Using Tactile Sensing and Surface Description Journal of Engineering For Industry. 113: 85-92. DOI: 10.1115/1.2899626 |
0.369 |
|
| 1991 |
Sarkar B, Menq C. Parameter optimization in approximating curves and surfaces to measurement data Computer Aided Geometric Design. 8: 267-290. DOI: 10.1016/0167-8396(91)90016-5 |
0.304 |
|
| 1991 |
Sarkar B, Menq C. Smooth-surface approximation and reverse engineering Computer-Aided Design. 23: 623-628. DOI: 10.1016/0010-4485(91)90038-X |
0.335 |
|
| 1990 |
Lai J, Menq C, Singh R. Accurate Position Control of a Pneumatic Actuator Journal of Dynamic Systems, Measurement, and Control. 112: 734-739. DOI: 10.1115/1.2896202 |
0.392 |
|
| Show low-probability matches. |