| Year |
Citation |
Score |
| 2020 |
Heckman NM, Padilla HA, Michael JR, Barr CM, Clark BG, Hattar K, Boyce BL. Rethinking scaling laws in the high-cycle fatigue response of nanostructured and coarse-grained metals International Journal of Fatigue. 134: 105472. DOI: 10.1016/J.Ijfatigue.2020.105472 |
0.582 |
|
| 2019 |
Lu P, Abdeljawad F, Rodriguez M, Chandross M, Adams D, Boyce B, Clark B, Argibay N. On the thermal stability and grain boundary segregation in nanocrystalline PtAu alloys Materialia. 6: 100298. DOI: 10.1016/J.Mtla.2019.100298 |
0.414 |
|
| 2018 |
Curry JF, Babuska TF, Furnish TA, Lu P, Adams DP, Kustas AB, Nation BL, Dugger MT, Chandross M, Clark BG, Boyce BL, Schuh CA, Argibay N. Achieving Ultralow Wear with Stable Nanocrystalline Metals. Advanced Materials (Deerfield Beach, Fla.). e1802026. PMID 29943512 DOI: 10.1002/Adma.201802026 |
0.435 |
|
| 2017 |
Rajasekhara S, Kotula P, Enos D, Doyle B, Clark B. Influence of Zircaloy cladding composition on hydride formation during aqueous hydrogen charging Journal of Nuclear Materials. 489: 222-228. DOI: 10.1016/J.Jnucmat.2016.04.055 |
0.351 |
|
| 2017 |
Noell P, Carroll J, Hattar K, Clark B, Boyce B. Do voids nucleate at grain boundaries during ductile rupture? Acta Materialia. 137: 103-114. DOI: 10.1016/J.Actamat.2017.07.004 |
0.622 |
|
| 2017 |
Abdeljawad F, Lu P, Argibay N, Clark BG, Boyce BL, Foiles SM. Grain boundary segregation in immiscible nanocrystalline alloys Acta Materialia. 126: 528-539. DOI: 10.1016/J.Actamat.2016.12.036 |
0.411 |
|
| 2016 |
Furnish TA, Boyce BL, Sharon JA, O'Brien CJ, Clark BG, Arrington CL, Pillars JR. Fatigue stress concentration and notch sensitivity in nanocrystalline metals Journal of Materials Research. 31: 740-752. DOI: 10.1557/Jmr.2016.66 |
0.366 |
|
| 2016 |
Argibay N, Furnish T, Boyce B, Clark B, Chandross M. Stress-dependent grain size evolution of nanocrystalline Ni-W and its impact on friction behavior Scripta Materialia. 123: 26-29. DOI: 10.1016/J.Scriptamat.2016.05.009 |
0.394 |
|
| 2016 |
Clark BG, Hattar K, Marshall MT, Chookajorn T, Boyce BL, Schuh CA. Thermal Stability Comparison of Nanocrystalline Fe-Based Binary Alloy Pairs Jom. 68: 1625-1633. DOI: 10.1007/S11837-016-1868-3 |
0.583 |
|
| 2015 |
Buchheit TE, Carroll JD, Clark BG, Boyce BL. Evaluating Deformation-Induced Grain Orientation Change in a Polycrystal During In Situ Tensile Deformation using EBSD. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 21: 969-84. PMID 26189352 DOI: 10.1017/S1431927615000677 |
0.424 |
|
| 2014 |
David Henry M, Wolfley S, Monson T, Clark BG, Shaner E, Jarecki R. Stress dependent oxidation of sputtered niobium and effects on superconductivity Journal of Applied Physics. 115. DOI: 10.1063/1.4866554 |
0.324 |
|
| 2014 |
Olsson RH, Hattar K, Homeijer SJ, Wiwi M, Eichenfield M, Branch DW, Baker MS, Nguyen J, Clark B, Bauer T, Friedmann TA. A high electromechanical coupling coefficient SH0 Lamb wave lithium niobate micromechanical resonator and a method for fabrication Sensors and Actuators, a: Physical. 209: 183-190. DOI: 10.1016/J.Sna.2014.01.033 |
0.493 |
|
| 2013 |
Cappillino PJ, Hattar KM, Clark BG, Hartnett RJ, Stavila V, Hekmaty MA, Jacobs BW, Robinson DB. Synthesis of mesoporous palladium with tunable porosity and demonstration of its thermal stability by in situ heating and environmental transmission electron microscopy Journal of Materials Chemistry A. 1: 602-610. DOI: 10.1039/C2Ta00190J |
0.567 |
|
| 2013 |
Rajasekhara S, Kotula PG, Enos DG, Doyle BL, Clark B. Investigation of δ-ZrH1.66/α-Zr interface in Zr-based cladding materials with aberration-corrected scanning transmission microscopy Microscopy and Microanalysis. 19: 1038-1039. DOI: 10.1017/S1431927613007186 |
0.323 |
|
| 2013 |
Carroll JD, Clark BG, Buchheit TE, Boyce BL, Weinberger CR. An experimental statistical analysis of stress projection factors in BCC tantalum Materials Science and Engineering A. 581: 108-118. DOI: 10.1016/J.Msea.2013.05.085 |
0.44 |
|
| 2013 |
Boyce BL, Clark BG, Lu P, Carroll JD, Weinberger CR. The morphology of tensile failure in tantalum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 4567-4580. DOI: 10.1007/S11661-013-1814-8 |
0.433 |
|
| 2012 |
Hattar K, Rajasekhara S, Clark B. In situTEM Ion Irradiation and Atmospheric Heating of Cladding Materials Mrs Proceedings. 1383. DOI: 10.1557/Opl.2012.186 |
0.559 |
|
| 2012 |
Battaile CC, Boyce BL, Weinberger CR, Prasad SV, Michael JR, Clark BG. The hardness and strength of metal tribofilms: An apparent contradiction between nanoindentation and pillar compression Acta Materialia. 60: 1712-1720. DOI: 10.1016/J.Actamat.2011.11.059 |
0.418 |
|
| 2011 |
Schneider AS, Frick CP, Clark BG, Gruber PA, Arzt E. Influence of orientation on the size effect in bcc pillars with different critical temperatures Materials Science and Engineering A. 528: 1540-1547. DOI: 10.1016/J.Msea.2010.10.073 |
0.425 |
|
| 2010 |
Hattar K, Clark BG, Knapp JA, Follstaedt DM, Robertson IM. In situ TEM Straining of Nanograined Al Films Strengthened with Al2O3 Nanoparticles Mrs Proceedings. 1262. DOI: 10.1557/Proc-1262-V01-04 |
0.628 |
|
| 2010 |
Schneider AS, Clark BG, Frick CP, Gruber PA, Arzt E. Effect of pre-straining on the size effect in molybdenum pillars Philosophical Magazine Letters. 90: 841-849. DOI: 10.1080/09500839.2010.508445 |
0.376 |
|
| 2010 |
Clark B, Knapp J, Hattar K, Padilla H, Boyce B. In-Situ TEM Studies of Deformation Mechanisms in Nanograined Al Strengthened with Al2O3 Nanoparticles Microscopy and Microanalysis. 16: 1724-1725. DOI: 10.1017/S1431927610062781 |
0.349 |
|
| 2010 |
Frick CP, Clark BG, Schneider AS, Maaß R, Petegem SV, Swygenhoven HV. On the plasticity of small-scale nickel-titanium shape memory alloys Scripta Materialia. 62: 492-495. DOI: 10.1016/J.Scriptamat.2009.12.023 |
0.429 |
|
| 2010 |
Clark BG, Gianola DS, Kraft O, Frick CP. Size independent shape memory behavior of nickel-titanium Advanced Engineering Materials. 12: 808-815. DOI: 10.1002/Adem.201000048 |
0.323 |
|
| 2009 |
Schneider AS, Kaufmann D, Clark BG, Frick CP, Gruber PA, Mönig R, Kraft O, Arzt E. Correlation between critical temperature and strength of small-scale bcc pillars. Physical Review Letters. 103: 105501. PMID 19792329 DOI: 10.1103/Physrevlett.103.105501 |
0.335 |
|
| 2009 |
Clark BG, Ferreira P, Robertson IM. In situ electron microscopy methods. Microscopy Research and Technique. 72: 121. PMID 19130507 DOI: 10.1002/Jemt.20663 |
0.457 |
|
| 2009 |
Schneider AS, Clark BG, Frick CP, Arzt E. Correlation between activation volume and pillar diameter for Mo and Nb BCC pillars Materials Research Society Symposium Proceedings. 1185: 75-79. DOI: 10.1557/Proc-1185-1107-08 |
0.369 |
|
| 2009 |
Schneider AS, Clark BG, Frick CP, Gruber PA, Arzt E. Effect of orientation and loading rate on compression behavior of small-scale Mo pillars Materials Science and Engineering A. 508: 241-246. DOI: 10.1016/J.Msea.2009.01.011 |
0.341 |
|
| 2008 |
Zaiser M, Schwerdtfeger J, Schneider AS, Frick CP, Clark BG, Gruber PA, Arzt E. Strain bursts in plastically deforming molybdenum micro- and nanopillars Philosophical Magazine. 88: 3861-3874. DOI: 10.1080/14786430802132522 |
0.383 |
|
| 2008 |
Frick CP, Clark BG, Orso S, Sonnweber-Ribic P, Arzt E. Orientation-independent pseudoelasticity in small-scale NiTi compression pillars Scripta Materialia. 59: 7-10. DOI: 10.1016/J.Scriptamat.2008.01.051 |
0.399 |
|
| 2008 |
Frick CP, Clark BG, Orso S, Schneider AS, Arzt E. Size effect on strength and strain hardening of small-scale [1 1 1] nickel compression pillars Materials Science and Engineering A. 489: 319-329. DOI: 10.1016/J.Msea.2007.12.038 |
0.435 |
|
| 2005 |
Clark BG, Robertson IM, Dougherty LM, Ahn DC, Sofronis P. High-temperature dislocation-precipitate interactions in Al alloys: An in situ transmission electron microscopy deformation study Journal of Materials Research. 20: 1792-1801. DOI: 10.1557/Jmr.2005.0224 |
0.666 |
|
| Show low-probability matches. |