| Year |
Citation |
Score |
| 2014 |
Bumm SH, White JL, Isayev AI. Breakup of silica agglomerates in corotating twin-screw extruder: Modeling and experiment Journal of Elastomers and Plastics. 46: 527-552. DOI: 10.1177/0095244313476508 |
0.378 |
|
| 2012 |
Bumm SH, White JL, Isayev AI. Glass fiber breakup in corotating twin screw extruder: Simulation and experiment Polymer Composites. 33: 2147-2158. DOI: 10.1002/Pc.22356 |
0.301 |
|
| 2012 |
Yang J, White JL. Crystallization behavior of polypropylene/ethylene butene copolymer blends Journal of Applied Polymer Science. 126: 2049-2058. DOI: 10.1002/App.35184 |
0.33 |
|
| 2011 |
Jiang Q, Yang J, White JL. Simulation of screw pumping characteristics for intermeshing counter-rotating twin screw extruders Polymer Engineering and Science. 51: 37-42. DOI: 10.1002/Pen.21789 |
0.353 |
|
| 2010 |
Jiang Q, White JL, Yang J. A Global Model for Closely Intermeshing Counter-rotating Twin Screw Extruders with Flood Feeding International Polymer Processing. 25: 223-235. DOI: 10.3139/217.2333 |
0.304 |
|
| 2010 |
Yang J, Jiang Q, White JL. Structure Development in the Melt Spinning of Polypropylene/Ethylene Butene Copolymer Blends and Birefringence Suppression Effect International Polymer Processing. 25: 346-355. DOI: 10.3139/217.2320 |
0.354 |
|
| 2010 |
Yang J, White JL, Jiang Q. Phase morphology development in a low interfacial tension immiscible polyolefin blend during die extrusion and melt spinning Polymer Engineering and Science. 50: 1969-1977. DOI: 10.1002/Pen.21726 |
0.349 |
|
| 2009 |
Kim K, White JL. Relationship Between Interfacial Adhesion and Viscosity of Cellulose Fiber Filled Polypropylene and Poly(ε-caprolactone): A Review Composite Interfaces. 16: 583-598. DOI: 10.1163/092764409X12477478334847 |
0.304 |
|
| 2009 |
Kim K, White JL. Effects of Regenerated Cellulose and Natural Fiber on Interfacial Adhesion, Rheology and Crystallization Property in ε-Polycaprolactone Compounds Composite Interfaces. 16: 619-637. DOI: 10.1163/092764409X12477406858223 |
0.338 |
|
| 2009 |
Yang J, White JL. Interface slippage study between polyamide 12 and ethylene butene copolymer melt in capillary extrusion Journal of Rheology. 53: 1121-1132. DOI: 10.1122/1.3198245 |
0.33 |
|
| 2008 |
Wilczynski K, White JL. Modelowanie procesu wytłaczania dwuślimakowego. Cz. 1, Model wytłaczania przeciwbieżnego Polimery. 53: 754-759. DOI: 10.14314/Polimery.2008.754 |
0.341 |
|
| 2008 |
Kim K, Bumm S, Gupta RK, White JL. Interfacial adhesion of cellulose fiber and natural fiber filled polypropylene compounds and their effects on rheological and mechanical properties Composite Interfaces. 15: 301-319. DOI: 10.1163/156855408783810939 |
0.335 |
|
| 2008 |
Shan H, White JL. Crystal structure and orientation behavior of transversely compressed poly(ethylene-co-1-octene) filaments Polymer Engineering and Science. 48: 2297-2304. DOI: 10.1002/Pen.21109 |
0.395 |
|
| 2008 |
Shon K, Bumm SH, White JL. A comparative study of dispersing a polyamide 6 into a polypropylene melt in a Buss Kneader, continuous mixer, and modular intermeshing corotating and counter‐rotating twin screw extruders Polymer Engineering and Science. 48: 756-766. DOI: 10.1002/Pen.20941 |
0.346 |
|
| 2007 |
Wilczynski K, Jiang Q, White JL. A Composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-rotating Twin Screw Extruder International Polymer Processing. 22: 198-203. DOI: 10.3139/217.2001 |
0.332 |
|
| 2007 |
Shan H, White JL, deGroot AW. Comparison of Crystallization and Melting Characteristics of Quiescent and Melt-Spun Poly(ethylene-co-octene) Copolymers International Journal of Polymer Analysis and Characterization. 12: 231-249. DOI: 10.1080/10236660701223816 |
0.348 |
|
| 2007 |
Aoki H, Coffin DR, Hancock TA, Harwood D, Lenk RS, Fellers JF, White JL. Synthesis, characterization, rheological, and fiber formation studies of p‐linked aromatic polyamides Journal of Polymer Science: Polymer Symposia. 65: 29-40. DOI: 10.1002/Polc.5070650105 |
0.343 |
|
| 2007 |
Suh J, White JL. Comparative study on quiescent crystallization kinetics of isotactic polyolefins Journal of Applied Polymer Science. 106: 276-282. DOI: 10.1002/App.26671 |
0.316 |
|
| 2006 |
Shan H, White JL, deGroot W. Simple Ways to Characterize Non-isothermal Crystallization of Homogeneous Poly(ethylene-1-co-octene) Copolymer International Journal of Polymer Analysis and Characterization. 11: 323-336. DOI: 10.1080/10236660600899310 |
0.314 |
|
| 2006 |
White JL, Shan H. Deformation-induced structural changes in crystalline polyolefins Polymer - Plastics Technology and Engineering. 45: 317-328. DOI: 10.1080/03602550600553069 |
0.312 |
|
| 2006 |
Jung H, White JL. Melting aspects of filled compounds in a modular co- rotating twin screw extruder Journal of Applied Polymer Science. 102: 1990-2012. DOI: 10.1002/App.24578 |
0.374 |
|
| 2006 |
White JL, Liu D, Bumm SH. Development of dispersion in rubber‐particle compounds in internal and continuous mixers Journal of Applied Polymer Science. 102: 3940-3943. DOI: 10.1002/App.24241 |
0.315 |
|
| 2006 |
Kim Y, White JL. Modeling of polymer/clay nanocomposite formation Journal of Applied Polymer Science. 101: 1657-1663. DOI: 10.1002/App.22196 |
0.354 |
|
| 2005 |
Kim I, White JL. Compatibilization of poly(vinyl chloride) with polyamide and with polyolefin by using poly(lauryllactam‐random‐caprolactam‐block‐caprolactone) Journal of Vinyl & Additive Technology. 11: 95-110. DOI: 10.1002/Vnl.20045 |
0.35 |
|
| 2005 |
Kim I, White JL. Continuous polymerization of ω‐lauryl lactam in an intermeshing corotating twin‐screw extruder Journal of Applied Polymer Science. 97: 1605-1620. DOI: 10.1002/App.21888 |
0.377 |
|
| 2005 |
Kim Y, White JL. Formation of polymer nanocomposites with various organoclays Journal of Applied Polymer Science. 96: 1888-1896. DOI: 10.1002/App.21581 |
0.362 |
|
| 2004 |
White JL. Polymer Processing Society at 20 International Polymer Processing. 19: 326-326. DOI: 10.3139/217.0442 |
0.322 |
|
| 2004 |
Hong MH, White JL. Structure development in melt-spinning syndiotactic polystyrene and comparison to atactic polystyrene Polymer Engineering and Science. 44: 2141-2147. DOI: 10.1002/Pen.20220 |
0.332 |
|
| 2004 |
Choi D, White JL. Crystallization and Orientation Development in Fiber and Film Processing of Polypropylenes of Varying Stereoregular Form and Tacticity Polymer Engineering and Science. 44: 210-222. DOI: 10.1002/Pen.20020 |
0.361 |
|
| 2004 |
Kim K, White JL, Shim SE, Choe S. Effects of stearic acid coated talc, CaCO3, and mixed talc/CaCO3 particles on the rheological properties of polypropylene compounds Journal of Applied Polymer Science. 93: 2105-2113. DOI: 10.1002/App.20686 |
0.339 |
|
| 2004 |
Shan H, White JL. Structure development in melt spinning of poly(ethylene-co-octene) filaments with various comonomer contents Journal of Applied Polymer Science. 93: 9-22. DOI: 10.1002/App.20333 |
0.382 |
|
| 2004 |
Kim Y, White JL. Melt-intercalation nanocomposites with fluorinated polymers and a correlation for nanocomposite formation Journal of Applied Polymer Science. 92: 1061-1071. DOI: 10.1002/App.13559 |
0.363 |
|
| 2004 |
Kim BJ, White JL. Compatibilized blends of PVC/PA12 and PVC/PP containing poly(lauryl lactam-block-caprolactone) Journal of Applied Polymer Science. 91: 1983-1992. DOI: 10.1002/App.13344 |
0.305 |
|
| 2004 |
Ahn S, White JL. Wall effects on flow of polymer/particulate/(carboxylic acid) in dies and rheometers Journal of Applied Polymer Science. 91: 651-658. DOI: 10.1002/App.13109 |
0.327 |
|
| 2003 |
White JL. Polymorphic and Crystal Structures from Crystallization in Polymer Processing International Polymer Processing. 18: 2-2. DOI: 10.3139/217.0301 |
0.313 |
|
| 2003 |
Wilczynski K, White JL. Melting model for intermeshing counter‐rotating twin‐screw extruders Polymer Engineering and Science. 43: 1715-1726. DOI: 10.1002/Pen.10145 |
0.347 |
|
| 2003 |
Kim I, White JL. Anionic Copolymerization of Lauryl Lactam and Polycaprolactone for the Production of a Poly(ester amide) Triblock Copolymer Journal of Applied Polymer Science. 90: 3797-3805. DOI: 10.1002/App.12980 |
0.309 |
|
| 2003 |
Sasaki A, White JL. Free‐radical attachment of nadic anhydride onto poly(alkylene terephthalate)s Journal of Applied Polymer Science. 90: 1839-1845. DOI: 10.1002/App.12833 |
0.328 |
|
| 2003 |
Kim Y, White JL. Melt-intercalation nanocomposites with chlorinated polymers Journal of Applied Polymer Science. 90: 1581-1588. DOI: 10.1002/App.12735 |
0.364 |
|
| 2003 |
Kim BJ, White JL. Continuous polymerization of lactam-lactone block copolymers in a twin-screw extruder Journal of Applied Polymer Science. 88: 1429-1437. DOI: 10.1002/App.11792 |
0.33 |
|
| 2002 |
White JL. Touchstones of Polymer Processing International Polymer Processing. 17: 182-182. DOI: 10.3139/217.0203 |
0.331 |
|
| 2002 |
Kim E, Keum J, White JL. The Problem of Downstream Homogenization for Simulations of Multicomponent Twin Screw Extrusion Compounding Journal of Polymer Engineering. 22: 441-456. DOI: 10.1515/Polyeng.2002.22.6.441 |
0.354 |
|
| 2002 |
Rhee S, White JL. Crystal structure, morphology, orientation, and mechanical properties of biaxially oriented polyamide 6 films Polymer. 43: 5903-5914. DOI: 10.1016/S0032-3861(02)00489-5 |
0.333 |
|
| 2002 |
Rhee S, White JL. Crystal structure and morphology of biaxially oriented polyamide 12 films Journal of Polymer Science, Part B: Polymer Physics. 40: 1189-1200. DOI: 10.1002/Polb.10181 |
0.36 |
|
| 2002 |
Kim EK, White JL. Transient compositional effects from feeders in a starved flow modular co-rotating twin-screw extruder Polymer Engineering and Science. 42: 2084-2093. DOI: 10.1002/Pen.11099 |
0.303 |
|
| 2002 |
Lee BH, White JL. Formation of a polyetheramide triblock copolymer by reactive extrusion; process and properties Polymer Engineering and Science. 42: 1710-1723. DOI: 10.1002/Pen.11065 |
0.352 |
|
| 2002 |
Choi D, White JL. Comparison of structure development in injection molding of isotactic and syndiotactic polypropylenes Polymer Engineering and Science. 42: 1642-1656. DOI: 10.1002/Pen.11059 |
0.321 |
|
| 2002 |
Rhee S, White JL. Development of orientation and mechanical properties of extrusion cast polyamide 11 films in biaxial stretching process Polymer Engineering and Science. 42: 889-898. DOI: 10.1002/Pen.10999 |
0.327 |
|
| 2002 |
Rhee S, White JL. Investigation of structure development in polyamide 11 and polyamide 12 tubular film extrusion Polymer Engineering and Science. 42: 134-145. DOI: 10.1002/Pen.10934 |
0.337 |
|
| 2001 |
Wilczynski K, White JL. Experimental Study of Melting in an Intermeshing Counter-Rotating Twin Screw Extruder International Polymer Processing. 16: 257-262. DOI: 10.3139/217.1645 |
0.303 |
|
| 2001 |
Lee E, White JL. Basic study of the interaction of thermoplastic fluoropolymer blends with metal surfaces during extrusion Nihon Reoroji Gakkaishi. 29: 39-45. DOI: 10.1678/Rheology.29.39 |
0.337 |
|
| 2001 |
Zhang W, Komoto S, Yamane H, Takahashi M, White JL. Biaxial Extensional Flow Behavior and Fiber Dispersion and Orientation in Short Glass Fiber Filled Polypropylene Melts. Journal of the Society of Rheology, Japan. 29: 111-120. DOI: 10.1678/Rheology.29.111 |
0.32 |
|
| 2001 |
Dennis H, Hunter D, Chang D, Kim S, White J, Cho J, Paul D. Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites Polymer. 42: 9513-9522. DOI: 10.1016/S0032-3861(01)00473-6 |
0.369 |
|
| 2001 |
Choi D, White JL. Crystal structures and orientation development in tubular film extrusion of syndiotactic polypropylene and isotactic polypropylene Polymer Engineering and Science. 41: 1743-1751. DOI: 10.1002/Pen.10871 |
0.314 |
|
| 2001 |
Yu Y, White JL. Comparison of structure development in quiescent crystallization, die extrusion and melt spinning of isotactic polypropylene and its compounds containing fillers and nucleating agents Polymer Engineering and Science. 41: 1292-1298. DOI: 10.1002/Pen.10829 |
0.347 |
|
| 2000 |
Lyu M, White JL. Simulation of Non-Linear Viscoelastic Flow Behavior in the Buss Kneader: Journal of Reinforced Plastics and Composites. 19: 756-791. DOI: 10.1177/073168440001901001 |
0.323 |
|
| 2000 |
Li H, White JL. Preparation and characterization of biaxially oriented films from polybutylene terephthalate based thermoplastic elastomer block copolymers Polymer Engineering and Science. 40: 2299-2310. DOI: 10.1002/Pen.11362 |
0.307 |
|
| 2000 |
Song K, White JL. Single and double bubble tubular film extrusion of polyethylene 2, 6-naphthalate (PEN) Polymer Engineering and Science. 40: 1122-1131. DOI: 10.1002/Pen.11240 |
0.31 |
|
| 2000 |
Li H, White JL. Structure development in melt spinning filaments from polybutylene terephthalate based thermoplastic elastomers Polymer Engineering and Science. 40: 917-928. DOI: 10.1002/Pen.11219 |
0.356 |
|
| 2000 |
Song K, White JL. Double bubble tubular film extrusion of polybutylene terephthalate–polyethylene terephthalate blends Polymer Engineering and Science. 40: 902-916. DOI: 10.1002/Pen.11218 |
0.327 |
|
| 2000 |
Kim EK, White JL. Isothermal transient startup of a starved flow modular co-rotating twin screw extruder Polymer Engineering and Science. 40: 543-553. DOI: 10.1002/Pen.11185 |
0.324 |
|
| 2000 |
Koolhiran C, White JL. Comparison of intermeshing rotor and traditional rotors of internal mixers in dispersing silica and other fillers Journal of Applied Polymer Science. 78: 1551-1554. DOI: 10.1002/1097-4628(20001121)78:8<1551::Aid-App120>3.0.Co;2-# |
0.357 |
|
| 2000 |
Severe G, White JL. Physical properties and blend miscibility of hydrogenated acrylonitrile‐butadiene rubber Journal of Applied Polymer Science. 78: 1521-1529. DOI: 10.1002/1097-4628(20001121)78:8<1521::Aid-App90>3.0.Co;2-Z |
0.364 |
|
| 1999 |
White JL, Kim KJ, Robinson DN. Alternate models for a transversely isotropic plastic viscoelastic fluid Journal of Non-Newtonian Fluid Mechanics. 83: 19-32. DOI: 10.1016/S0377-0257(98)00140-2 |
0.322 |
|
| 1999 |
Kim KJ, White JL. Rheological investigations of suspensions of talc, calcium carbonate, and their mixtures in a polystyrene melt Polymer Engineering and Science. 39: 2189-2198. DOI: 10.1002/Pen.11608 |
0.353 |
|
| 1999 |
Lee E, White JL. Extrusion characteristics of thermoplastic melts containing fluoropolymers Polymer Engineering and Science. 39: 327-339. DOI: 10.1002/Pen.11419 |
0.332 |
|
| 1999 |
Kim KJ, White JL. X‐ray absorption, particle orientation, and rheological behavior of talc–calcite mixed‐particle compounds in a polystyrene matrix Journal of Polymer Science Part B. 37: 1787-1802. DOI: 10.1002/(Sici)1099-0488(19990801)37:15<1787::Aid-Polb4>3.0.Co;2-Z |
0.365 |
|
| 1998 |
Song K, White JL. Formation and Characterization of Cast, Tubular and Biaxially Stretched Poly(butylene Terephthalate) Film Journal of Reinforced Plastics and Composites. 17: 1012-1023. DOI: 10.1177/073168449801701103 |
0.313 |
|
| 1998 |
Bawiskar S, White JL. Melting model for modular self wiping co-rotating twin screw extruders Polymer Engineering and Science. 38: 727-740. DOI: 10.1002/Pen.10238 |
0.327 |
|
| 1998 |
Araki T, White JL. Shear viscosity of carbon black filled polypropylene at very low shear stresses Polymer Engineering and Science. 38: 616-621. DOI: 10.1002/Pen.10226 |
0.324 |
|
| 1998 |
Araki T, White JL. Shear viscosity of rubber modified thermoplastics: Dynamically vulcanized thermoplastic elastomers and ABS resins at very low stress Polymer Engineering and Science. 38: 590-595. DOI: 10.1002/Pen.10222 |
0.312 |
|
| 1998 |
Song K, White JL. Formation and characterization of cast and biaxially stretched poly(butylene terephthalate) film Polymer Engineering and Science. 38: 505-515. DOI: 10.1002/Pen.10213 |
0.329 |
|
| 1998 |
Bang D, Hong M, White JL. Modular tangential counter‐rotating twin screw extrusion: Determination of screw pumping characteristics of modules and composite machine behavior Polymer Engineering and Science. 38: 485-498. DOI: 10.1002/Pen.10211 |
0.324 |
|
| 1997 |
Shin KC, White JL. Simulation of non-Newtonian flow of rubber compounds in a pin barrel screw extruder Rubber Chemistry and Technology. 70: 264-270. DOI: 10.5254/1.3538431 |
0.323 |
|
| 1997 |
White JL. Third in a Series: Pioneers of Polymer Processing: Charles Goodyear International Polymer Processing. 12: 82-82. DOI: 10.3139/217.970082 |
0.337 |
|
| 1997 |
White JL, Suh CH. A theory of transversely isotropic plastic viscoelastic fluids to represent the flow of talc and similar disc-like particle suspensions in thermoplastics Journal of Non-Newtonian Fluid Mechanics. 69: 15-27. DOI: 10.1016/S0377-0257(96)01489-9 |
0.323 |
|
| 1997 |
Lyu M, White JL. Simulation of linear viscoelastic flow behavior in the Buss Kneader Polymer Engineering and Science. 37: 623-635. DOI: 10.1002/Pen.11705 |
0.312 |
|
| 1996 |
White JL. First in a Series: Pioneers of Polymer Processing: Thomas Hancock – The First Polymer Processing Innovator International Polymer Processing. 11: 298-298. DOI: 10.3139/217.960298 |
0.335 |
|
| 1996 |
Kim KJ, White JL. Particle orientation in talc-filled thermoplastics extruded through cylindrical, rectangular and annular dies Journal of Non-Newtonian Fluid Mechanics. 66: 257-270. DOI: 10.1016/S0377-0257(96)01464-4 |
0.304 |
|
| 1996 |
White JL, Min K. Mixing of Polymers Comprehensive Polymer Science and Supplements. 9: 285-302. DOI: 10.1016/B978-0-08-096701-1.00212-3 |
0.351 |
|
| 1996 |
Suh CH, White JL. Talc-thermoplastic compounds: particle orientation in flow and rheological properties Journal of Non-Newtonian Fluid Mechanics. 62: 175-206. DOI: 10.1016/0377-0257(95)01382-2 |
0.342 |
|
| 1996 |
Suh CH, White JL. Particle and polymer chain orientation development in thermoformed talc‐filled thermoplastics Polymer Engineering and Science. 36: 2188-2197. DOI: 10.1002/Pen.10616 |
0.314 |
|
| 1996 |
Suh CH, White JL. Basic studies of blow molding of talc‐thermoplastic compounds Polymer Engineering and Science. 36: 1521-1530. DOI: 10.1002/Pen.10547 |
0.341 |
|
| 1996 |
Nagy T, White JL. The effect of colorants on the properties of rotomolded polyethylene parts Polymer Engineering and Science. 36: 1010-1018. DOI: 10.1002/Pen.10488 |
0.3 |
|
| 1995 |
Han PK, White JL. Rheological Studies of Dynamically Vulcanized and Mechanical Blends of Polypropylene and Ethylene-Propylene Rubber Rubber Chemistry and Technology. 68: 728-738. DOI: 10.5254/1.3538769 |
0.391 |
|
| 1995 |
Osanaiye GJ, Leonov AI, White JL. Rheological Properties of Rubber-Carbon Black and Carbon Black-Oil Compounds Including Measurements at Very Low Shear Stresses Rubber Chemistry and Technology. 68: 50-58. DOI: 10.5254/1.3538731 |
0.315 |
|
| 1994 |
Bawiskar S, White JL. Comparative study of warpage, global shrinkage, residual stresses, and mechanical behavior of rotationally molded parts produced from different polymers Polymer Engineering and Science. 34: 815-820. DOI: 10.1002/Pen.760341006 |
0.374 |
|
| 1994 |
Lim S, White JL. Influence of a compatibilizing agent on the phase morphology of a polyethylene-polyamide 6 blend in a modular intermeshing co-rotating twin screw extruder Polymer Engineering and Science. 34: 221-228. DOI: 10.1002/Pen.760340308 |
0.324 |
|
| 1994 |
Kim PJ, White JL. Transesterification of ethylene vinyl acetate copolymer in a modular intermeshing corotating twin screw extruder with different screw configurations Journal of Applied Polymer Science. 54: 33-45. DOI: 10.1002/App.1994.070540104 |
0.326 |
|
| 1994 |
Kye H, White JL. Continuous polymerization of caprolactam in a modular intermeshing corotating twin screw extruder integrated with continuous melt spinning of polyamide 6 fiber: Influence of screw design and process conditions Journal of Applied Polymer Science. 52: 1249-1262. DOI: 10.1002/App.1994.070520910 |
0.387 |
|
| 1994 |
Yoon PJ, White JL. Interfacial tension of poly(p‐phenylene sulfide) with other polymer melts Journal of Applied Polymer Science. 51: 1515-1519. DOI: 10.1002/App.1994.070510819 |
0.359 |
|
| 1993 |
Hu B, White JL. Comparison of Four-Flighted and Two-Flighted Internal Mixer Rotors Using Cylindrical Coordinate Hydrodynamic Lubrication Theory Rubber Chemistry and Technology. 66: 257-275. DOI: 10.5254/1.3538310 |
0.303 |
|
| 1993 |
Osanaiye GJ, Leonov AI, White JL. Investigations of the rheological behavior of rubber-carbon black compounds over a wide range of stresses including very low stresses Journal of Non-Newtonian Fluid Mechanics. 49: 87-101. DOI: 10.1016/0377-0257(93)85024-5 |
0.308 |
|
| 1993 |
Lim S, White JL. Polymer crystalline orientation resulting from melt deformation and solidification of talc and mica filled polyethylene compounds Colloid and Polymer Science. 271: 731-738. DOI: 10.1007/Bf00660089 |
0.404 |
|
| 1993 |
Cakmak M, Teitge A, Zachmann HG, White JL. On-line small-angle and wide-angle x-ray scattering studies on melt-spinning poly(vinylidene fluoride) tape using synchrotron radiation Journal of Polymer Science Part B: Polymer Physics. 31: 371-381. DOI: 10.1002/Polb.1993.090310316 |
0.495 |
|
| 1993 |
Chen CC, White JL. Compatibilizing agents in polymer blends : interfacial tension, phase morphology, and mechanical properties Polymer Engineering and Science. 33: 923-930. DOI: 10.1002/Pen.760331409 |
0.319 |
|
| 1992 |
Kalvani B, White JL, Cakmak M. Characteristics and flow behavior of molten tin-polypropylene blend systems Colloid &Amp; Polymer Science. 270: 738-746. DOI: 10.1007/Bf00776144 |
0.54 |
|
| 1992 |
Watanabe T, White JL. Dichroic polyethylene terephthalate films based upon compounds containing dyestuffs Colloid and Polymer Science. 270: 519-526. DOI: 10.1007/Bf00658282 |
0.328 |
|
| 1992 |
Akhtar S, White JL. Phase morphology and mechanical properties of blends of poly(p‐phenylene sulfide) and polyamides Polymer Engineering and Science. 32: 690-698. DOI: 10.1002/Pen.760321008 |
0.344 |
|
| 1991 |
White JL, Han MH, Nakajima N, Brzoskowski R. The influence of materials of construction on biconical rotor and capillary measurements of shear viscosity of rubber and its compounds and considerations of slippage Journal of Rheology. 35: 167-189. DOI: 10.1122/1.550226 |
0.309 |
|
| 1991 |
Setua DK, White JL. Flow visualization of the influence of compatibilizing agents on the mixing of elastomer blends and the effect on phase morphology Polymer Engineering and Science. 31: 1742-1754. DOI: 10.1002/Pen.760312408 |
0.324 |
|
| 1991 |
Jiang R, Quirk RP, White JL, Min K. Polycarbonate-polystyrene block copolymers and their application as compatibilzing agents in polymer blends Polymer Engineering and Science. 31: 1545-1548. DOI: 10.1002/Pen.760312107 |
0.335 |
|
| 1991 |
Wu J, White JL. Study of birefringence character of injection‐ and compression‐molded polycarbonate and its interpretation Polymer Engineering and Science. 31: 652-660. DOI: 10.1002/Pen.760310906 |
0.345 |
|
| 1991 |
Akhtar S, White JL. Characteristics of binary and ternary blends of poly (p‐phenylene sulfide) with poly(bis phenol A) sulfone and polyetherimide Polymer Engineering and Science. 31: 84-91. DOI: 10.1002/Pen.760310205 |
0.346 |
|
| 1991 |
Ghiam F, White JL. Phase morphology of injection‐molded blends of nylon‐6 and polyethylene and comparison with compression molding Polymer Engineering and Science. 31: 76-83. DOI: 10.1002/Pen.760310204 |
0.307 |
|
| 1990 |
Lim SH, White JL. Development and characterization of orientation of anisotropic disk and fibrous particles in a thermoplastic matrix Journal of Rheology. 34: 343-366. DOI: 10.1122/1.550132 |
0.375 |
|
| 1990 |
Kim MH, White JL. A non-Newtonian model of flow in forward and backward pumping screw regions of a modular tangential counter-rotating twin-screw extruder Journal of Non-Newtonian Fluid Mechanics. 37: 37-53. DOI: 10.1016/0377-0257(90)80003-I |
0.323 |
|
| 1990 |
Rang HJ, White JL. A double bubble tubular film process to produce biaxially oriented poly(p‐phenylene sulfide) (PPS) film Polymer Engineering and Science. 30: 1228-1236. DOI: 10.1002/Pen.760301907 |
0.308 |
|
| 1990 |
Hsiung C, Cakmak M, White JL. Crystallization phenomena in the injection molding of poly ether ether ketone and its influence on mechanical properties Polymer Engineering and Science. 30: 967-980. DOI: 10.1002/Pen.760301606 |
0.551 |
|
| 1990 |
Song SS, White JL, Cakmak M. Crystallization kinetics and nucleating agents for enhancing the crystallization of poly(p-phenylene sulfide) Polymer Engineering and Science. 30: 944-949. DOI: 10.1002/Pen.760301603 |
0.516 |
|
| 1990 |
Yoshida M, Ma JJ, Min K, White JL, Quirk RP. Polyester-polystyrene block copolymers and their influence on phase morphology and mechanical properties in polymer blends Polymer Engineering and Science. 30: 30-43. DOI: 10.1002/Pen.760300106 |
0.349 |
|
| 1989 |
Song SS, White JL, Cakmak M. Structure development in melt spinning and drawing Poly Ether Ether Ketone (PEEK) fibers Annual Technical Conference - Society of Plastics Engineers. 1724-1727. DOI: 10.2115/Fiber.45.6_243 |
0.526 |
|
| 1989 |
Brzoskowski R, Montes SA, White JL, Nakajima N. Investigations of the interaction of flowing rubber compounds with boundaries: Basic experiments and air lubricated die Journal of Non-Newtonian Fluid Mechanics. 31: 43-58. DOI: 10.1016/0377-0257(89)80013-8 |
0.302 |
|
| 1989 |
Wu JP, White JL, Cakmak M. Fabrication and characterization of orientation in skew stretched polyethylene terephthalate films Colloid &Amp; Polymer Science. 267: 881-888. DOI: 10.1007/Bf01410336 |
0.521 |
|
| 1989 |
Cakmak M, White JL, Spruiell JE. Optical properties of simultaneous biaxially stretched poly(ethylene terephthalate) films Polymer Engineering and Science. 29: 1534-1543. DOI: 10.1002/Pen.760292108 |
0.522 |
|
| 1989 |
Choi K, Spruiell JE, White JL. Structure development in biaxially stretched polystyrene film: Part II. Theoretical analysis of orientation development Polymer Engineering and Science. 29: 1524-1527. DOI: 10.1002/Pen.760292106 |
0.313 |
|
| 1989 |
Choi K, Spruiell JE, White JL. Structure development in biaxially stretched polystyrene film: Part I. Property-orientation correlation Polymer Engineering and Science. 29: 1516-1523. DOI: 10.1002/Pen.760292105 |
0.325 |
|
| 1989 |
Shah K, White JL, Min K. A study of the miscibility of blends of polybutadiene and styrene‐butadiene copolymers Polymer Engineering and Science. 29: 586-592. DOI: 10.1002/Pen.760290904 |
0.354 |
|
| 1989 |
Choi K, Spruiell JE, White JL. Orientation and crystalline morphology of blow molded polyethylene bottles Polymer Engineering and Science. 29: 463-470. DOI: 10.1002/Pen.760290706 |
0.363 |
|
| 1989 |
Maemura E, Cakmak M, White JL. Characterization of crystallinity, orientation, and mechanical properties in biaxially stretched poly(p-phenylene sulfide) films Polymer Engineering and Science. 29: 140-150. DOI: 10.1002/Pen.760290210 |
0.545 |
|
| 1989 |
Kyu T, Chen TI, Park H‐, White JL. Miscibility in poly‐p‐phenylene terephthalamide/nylon 6 and nylon 66 molecular composites Journal of Applied Polymer Science. 37: 201-213. DOI: 10.1002/App.1989.070370115 |
0.314 |
|
| 1989 |
Kim MH, Szydlowski W, White JL, Min K. A new model of flow in a tangential counter‐rotating twin screw extruder Advances in Polymer Technology. 9: 87-95. DOI: 10.1002/Adv.1989.060090109 |
0.33 |
|
| 1988 |
Chen Y, White JL, Min K, Nakajima N, Weissert FC. A Rheo-Optical Study of the Influence of Additives on Crystallization Rates in Cis-1,4 Polyisoprene Rubber Chemistry and Technology. 61: 324-339. DOI: 10.5254/1.3536191 |
0.301 |
|
| 1988 |
Maemura E, Cakmak M, White JL. Characterization of Crystallinity and Orientation in Poly-p-Phenylene Sulfide International Polymer Processing. 3: 79-85. DOI: 10.3139/217.880079 |
0.504 |
|
| 1988 |
Montes S, White JL, Nakajima N. Rheological behavior of rubber carbon black compounds in various shear flow histories Journal of Non-Newtonian Fluid Mechanics. 28: 183-212. DOI: 10.1016/0377-0257(88)85039-0 |
0.317 |
|
| 1988 |
Huarng JC, Min K, White JL. Phase equilibrium in the binary and ternary blend system: Polycaprolactone‐polyvinyl chloride‐styrene acrylonitrile copolymer Polymer Engineering and Science. 28: 1590-1599. DOI: 10.1002/Pen.760282404 |
0.314 |
|
| 1988 |
Shah K, Min K, White JL. A study of miscibility of blends of polybutadienes of varying microstructure Polymer Engineering and Science. 28: 1277-1288. DOI: 10.1002/Pen.760282002 |
0.36 |
|
| 1988 |
Huarng JC, Min K, White JL. Miscibility and morphology of the poly(vinyl chloride)/styrene-acrylonitrile copolymer/poly(methyl methacrylate) ternary blend system Polymer Engineering and Science. 28: 1085-1094. DOI: 10.1002/Pen.760281703 |
0.312 |
|
| 1988 |
Chen CC, Fontan E, Min K, White JL. An investigation of instability of phase morphology of blends of nylons with polyethylenes and polystyrenes and effects of compatibilizing agents Polymer Engineering and Science. 28: 69-80. DOI: 10.1002/Pen.760280203 |
0.31 |
|
| 1988 |
White JL, Kim J, Szydlowski W, Min K. Simulation of flow in compounding machinery: Internal mixers and modular corotating intermeshing twin‐screw extruders Polymer Composites. 9: 368-377. DOI: 10.1002/Pc.750090510 |
0.311 |
|
| 1988 |
White JL, Min K. Development of polymer blend phase morphology during processing Macromolecular Symposia. 16: 19-39. DOI: 10.1002/Masy.19880160104 |
0.393 |
|
| 1988 |
Song HJ, White JL, Min K, Nakajima N, Weissert FC. Rheological properties, extrudate swell, and die entry extrusion flow marker experiments for rubber–carbon black compounds Advances in Polymer Technology. 8: 431-449. DOI: 10.1002/Adv.1988.060080407 |
0.326 |
|
| 1988 |
Lim S, Kikutani T, White JL, Kyu T. Wide angle X‐ray diffraction investigations of orientation of chopped fibers in fabricated thermoplastic parts Advances in Polymer Technology. 8: 325-334. DOI: 10.1002/Adv.1988.060080308 |
0.326 |
|
| 1988 |
White JL, Cakmak M. Orientation, crystallization, and haze development in tubular film extrusion Advances in Polymer Technology. 8: 27-61. DOI: 10.1002/Adv.1988.060080105 |
0.555 |
|
| 1987 |
Brzoskowski R, White JL, Szydlowski W, Weissert FC, Nakajima N, Min K. Air-lubricated die for extrusion of rubber compounds Rubber Chemistry and Technology. 60: 945-956. DOI: 10.5254/1.3536166 |
0.32 |
|
| 1987 |
Kubota K, Brzoskowski R, White JL, Weissert FC, Nakajima N, Min K. Comparison of Screw Extrusion of Rubber Compounds with Different Extruder/Screw Combinations Rubber Chemistry and Technology. 60: 924-944. DOI: 10.5254/1.3536165 |
0.324 |
|
| 1987 |
White JL, Wang Y, Isayev AI, Nakajima N, Weissert FC, Min K. Modelling of Shear Viscosity Behavior and Extrusion through Dies for Rubber Compounds Rubber Chemistry and Technology. 60: 337-360. DOI: 10.5254/1.3536134 |
0.33 |
|
| 1987 |
Szydlowski W, Brzoskowski R, White JL. Modelling Flow in an Intermeshing Co-rotating Twin Screw Extruder: Flow in Kneading Discs International Polymer Processing. 1: 207-214. DOI: 10.3139/217.870207 |
0.321 |
|
| 1987 |
Brzoskowski R, Kubota K, Chung K, White JL, Weissert FC, Nakajima N, Min K. Experimental and Theoretical Study of the Flow Characteristics of Rubber Compounds in an Extruder Screw International Polymer Processing. 1: 130-136. DOI: 10.3139/217.870130 |
0.349 |
|
| 1987 |
Yamane H, White JL. A Comparative Study of Flow Instabilities in Extrusion, Melt Spinning, and Tubular Blown Film Extrusion of Rheologically Characterized High Density, Low Density and Linear Low Density Polyethylene Melts Nihon Reoroji Gakkaishi. 15: 131-140. DOI: 10.1678/Rheology1973.15.3_131 |
0.315 |
|
| 1987 |
Cakmak M, Spruiell JE, White JL, Lin JS. Small angle and wide angle x-ray pole figure studies on simultaneous biaxially stretched poly(ethylene terephthalate) (PET) films Polymer Engineering and Science. 27: 893-905. DOI: 10.1002/Pen.760271205 |
0.512 |
|
| 1987 |
White JL, Szydlowski W. Composite models of modular intermeshing corotating and tangential counter‐rotating twin screw extruders Advances in Polymer Technology. 7: 419-426. DOI: 10.1002/Adv.1987.060070407 |
0.304 |
|
| 1987 |
Szydlowski W, White JL. An improved theory of metering in an intermeshing corotating twin‐screw extruder Advances in Polymer Technology. 7: 177-183. DOI: 10.1002/Adv.1987.060070206 |
0.303 |
|
| 1986 |
Brzoskowski R, White JL, Weissert FC, Nakajima N, Min K. Experimental Study of the Flow Characteristics of Rubber Compounds in Extruder Screws Rubber Chemistry and Technology. 59: 634-650. DOI: 10.5254/1.3538225 |
0.331 |
|
| 1986 |
Cakmak M, Spruiell JE, White JL. Structural characterization of crystallinity and crystalline orientation in simultaneously biaxially stretched and annealed polyethylene terephthalate films Journal of Polymer Engineering. 6: 291-312. DOI: 10.1515/Polyeng.1986.6.1-4.291 |
0.551 |
|
| 1986 |
Minoshima W, White JL. Instability phenomena in tubular film, and melt spinning of rheologically characterized high density, low density and linear low density polyethylenes Journal of Non-Newtonian Fluid Mechanics. 19: 275-302. DOI: 10.1016/0377-0257(86)80053-2 |
0.32 |
|
| 1986 |
Minoshima W, White JL. A comparative experimental study of the isothermal shear and uniaxial elongational rheological properties of low density, high density and linear low density polyethylenes Journal of Non-Newtonian Fluid Mechanics. 19: 251-274. DOI: 10.1016/0377-0257(86)80052-0 |
0.327 |
|
| 1986 |
Endo S, Min K, White JL, Kyu T. Polyethylene‐polycarbonate blends: Interface modification, phase morphology and measurement of orientation development during cast film and tubular extrusion by infrared dichroism Polymer Engineering &Amp; Science. 26: 45-53. DOI: 10.1002/Pen.760260109 |
0.349 |
|
| 1986 |
Martinsson J, White JL. Characteristics of thermoplastics containing electrically conducting asymmetric particles: Anisotropic electrical conductivity of injection molded parts and extrusion behavior Polymer Composites. 7: 302-314. DOI: 10.1002/Pc.750070507 |
0.32 |
|
| 1986 |
Santamaria A, White JL. Rheological properties, shrinkage and melt spinning instability of blends of linear polyolefins with low density polyethylene Journal of Applied Polymer Science. 31: 209-224. DOI: 10.1002/App.1986.070310119 |
0.333 |
|
| 1986 |
White JL, Cakmak M. Orientation development and crystallization in melt spinning of fibers Advances in Polymer Technology. 6: 295-337. DOI: 10.1002/Adv.1986.060060307 |
0.35 |
|
| 1985 |
Ma C, White JL, Weissert FC, Isayev AI, Nakajima N, Min K. Flow Patterns in Elastomers and Their Carbon Black Compounds during Extrusion through Dies Rubber Chemistry and Technology. 58: 815-829. DOI: 10.5254/1.3536095 |
0.316 |
|
| 1985 |
Kanai T, White JL. Dynamics, heat transfer and structure development in tubular film extrusion of polymer melts: a mathematical model and predictions Journal of Polymer Engineering. 5: 135-157. DOI: 10.1515/Polyeng-1985-0204 |
0.323 |
|
| 1985 |
Ma C, White JL, Weissert FC, Min K. Flow patterns in carbon black filled polyethylene at the entrance to a die Journal of Non-Newtonian Fluid Mechanics. 17: 275-287. DOI: 10.1016/0377-0257(85)80022-7 |
0.318 |
|
| 1985 |
Cakmak M, White JL, Spruiell JE. An investigation of the kinematics of stretch blow molding poly(ethylene terephthalate) bottles Journal of Applied Polymer Science. 30: 3679-3695. DOI: 10.1002/App.1985.070300913 |
0.517 |
|
| 1985 |
Wang Y, Cakmak M, White JL. Structure development in melt spinning poly(vinylidene fluoride) fibres and tapes . DOI: 10.1002/App.1985.070300625 |
0.509 |
|
| 1985 |
Sugiyama H, Lewis DN, White JL, Fellers JF. Structural characteristics, rheological properties, extrusion, and melt spinning of 60/40 poly(hydroxybenzoic acid-coethylene terephthalate) (PHB/PET) Journal of Applied Polymer Science. 30: 2329-2341. DOI: 10.1002/App.1985.070300606 |
0.382 |
|
| 1985 |
White JL, Min K. The development of phase morphology and polymer chain orientation in the processing of incompatible polymer blends Advances in Polymer Technology. 5: 225-237. DOI: 10.1002/Adv.1985.060050401 |
0.404 |
|
| 1984 |
Kanai T, Tomikawa M, White JL, Shimizu J. The Study On The Dynamics Of Tubular Film Extrusion [I] Analysis Of Crystalline Polymer Sen-I Gakkaishi. 40. DOI: 10.2115/Fiber.40.12_T465 |
0.371 |
|
| 1984 |
White JL. A Generation of Investigations of Rheology and Structure Development in Polymer Processing--A Personal View Nihon Reoroji Gakkaishi. 12: 184-206. DOI: 10.1678/Rheology1973.12.4_184 |
0.329 |
|
| 1984 |
Suetsugu Y, White JL. A theory of thixotropic plastic viscoelastic fluids with a time-dependent yield surface and its comparison to transient and steady state experiments on small particle filled polymer melts Journal of Non-Newtonian Fluid Mechanics. 14: 121-140. DOI: 10.1016/0377-0257(84)80040-3 |
0.363 |
|
| 1984 |
Cakmak M, Spruiell JE, White JL. A basic study of orientation in poly(ethylene terephthalate) stretch-blow molded bottles Polymer Engineering and Science. 24: 1390-1395. DOI: 10.1002/Pen.760241804 |
0.548 |
|
| 1984 |
Min K, White JL, Fellers JF. Development of phase morphology in incompatible polymer blends during mixing and its variation in extrusion Polymer Engineering and Science. 24: 1327-1336. DOI: 10.1002/Pen.760241710 |
0.346 |
|
| 1984 |
Kanai T, White JL. Kinematics, dynamics and stability of the tubular film extrusion of various polyethylenes Polymer Engineering &Amp; Science. 24: 1185-1201. DOI: 10.1002/Pen.760241508 |
0.337 |
|
| 1984 |
Menendez H, White JL. A Wide-angle X-ray diffraction method of determining chopped fiber orientation in composites with application to extrusion through dies Polymer Engineering and Science. 24: 1051-1055. DOI: 10.1002/Pen.760241310 |
0.327 |
|
| 1984 |
Ashizawa H, Spruiell JE, White JL. An investigation of optical clarity and crystalline orientation in polyethylene tubular film Polymer Engineering and Science. 24: 1035-1042. DOI: 10.1002/Pen.760241307 |
0.319 |
|
| 1984 |
Bodaghi H, Kitao T, Flood JE, Fellers JF, White JL. Poly(p‐phenylene terephthalamide) films formed from extrusion and coagulation of liquid crystalline sulphuric acid solutions: Characterization of orientation and void structure, annealing, and upgrading of film mechanical properties Polymer Engineering and Science. 24: 242-251. DOI: 10.1002/Pen.760240403 |
0.323 |
|
| 1984 |
Min K, White JL, Fellers JF. High density polyethylene/polystyrene blends: Phase distribution morphology, rheological measurements, extrusion, and melt spinning behavior Journal of Applied Polymer Science. 29: 2117-2142. DOI: 10.1002/App.1984.070290619 |
0.386 |
|
| 1983 |
Chen CH, White JL, Spruiell JE, Goswami BC. Dynamics, Air Drag, and Orientation Development in the Spunbonding Process for Nonwoven Fabrics Textile Research Journal. 53: 44-51. DOI: 10.1177/004051758305300108 |
0.309 |
|
| 1983 |
Yamane H, White JL. Extrusion and melt spinning characteristics of thermally degraded polypropylene Polymer Engineering and Science. 23: 516-520. DOI: 10.1002/Pen.760230907 |
0.301 |
|
| 1983 |
White JL, Spruiell JE. The specification of orientation and its development in polymer processing Polymer Engineering &Amp; Science. 23: 247-256. DOI: 10.1002/Pen.760230503 |
0.399 |
|
| 1983 |
Liang B, White JL, Spruiell JE, Goswami BC. Polypropylene/nylon 6 blends: Phase distribution morphology, rheological measurements, and structure development in melt spinning Journal of Applied Polymer Science. 28: 2011-2032. DOI: 10.1002/App.1983.070280616 |
0.375 |
|
| 1982 |
Montes S, White JL. A Comparative Rheological Investigation of Natural and Synthetic Cis-1,4 Polyisoprenes and Their Carbon Black Compounds Rubber Chemistry and Technology. 55: 1354-1369. DOI: 10.5254/1.3535934 |
0.326 |
|
| 1982 |
Minoshima W, White JL. Multiaxial elongational flow of sheets and annular cylinders: growth disturbances Journal of Non-Newtonian Fluid Mechanics. 11: 127-145. DOI: 10.1016/0377-0257(82)85018-0 |
0.303 |
|
| 1982 |
White JL, Lobe VM. Comparison of the predictions of viscoelastic and plastic-viscoelastic fluid model to the rheological behaviour of polystyrene and polystyrene-carbon black compounds Rheologica Acta. 21: 167-175. DOI: 10.1007/Bf01736415 |
0.353 |
|
| 1982 |
Suto S, White JL, Fellers JF. A comparative study of the thermotropic mesomorphic tendencies and rheological characteristics of three cellulose derivates: Ethylene and propylene oxide ethers and an acetate butyrate ester Rheologica Acta. 21: 62-71. DOI: 10.1007/Bf01520706 |
0.353 |
|
| 1982 |
Toki S, White JL. Rheological and solid wall boundary condition characterization of unvulcanized elastomers and their compounds Journal of Applied Polymer Science. 27: 3171-3184. DOI: 10.1002/App.1982.070270837 |
0.36 |
|
| 1982 |
Flood JE, White JL, Fellers JF. Process for the formation of biaxially oriented films of poly(p-phenylene terephthalamide) from liquid crystalline solutions Journal of Applied Polymer Science. 27: 2965-2985. DOI: 10.1002/App.1982.070270821 |
0.327 |
|
| 1982 |
Shimomura Y, Spruiell JE, White JL. Orientation development in the tubular film extrusion of polypropylene Journal of Applied Polymer Science. 27: 2663-2674. DOI: 10.1002/App.1982.070270733 |
0.332 |
|
| 1982 |
Mui ETC, Boateng VB, Fellers JF, White JL. Interaction of polymerization conditions, structural variables, and mechanical properties of rubber‐modified plastics produced from bulk polymerized styrene/poly(butadiene‐co‐styrene) Journal of Applied Polymer Science. 27: 1395-1407. DOI: 10.1002/App.1982.070270428 |
0.354 |
|
| 1981 |
White JL, Huang DC. Dimensional analysis and a theory of elastic recovery following flow of elastic plastic viscoelastic fluids with application to filled polymer melts Journal of Non-Newtonian Fluid Mechanics. 9: 223-233. DOI: 10.1016/0377-0257(81)85002-1 |
0.362 |
|
| 1981 |
White JL. Approximate constitutive equations for slow flow of rigid plastic viscoelastic fluids Journal of Non-Newtonian Fluid Mechanics. 8: 195-202. DOI: 10.1016/0377-0257(81)80019-5 |
0.319 |
|
| 1981 |
White JL. Laminar shear flow of plastic viscoelastic fluids Rheologica Acta. 20: 381-389. DOI: 10.1007/Bf01547669 |
0.352 |
|
| 1981 |
White JL, Minoshima W. Significance of deformation rate softening of memory in viscoelastic fluid mechanics and polymer processing Polymer Engineering and Science. 21: 1113-1121. DOI: 10.1002/Pen.760211702 |
0.334 |
|
| 1981 |
White JL, Huang D. Extrudate swell and extrusion pressure loss of polymer melts flowing through rectangular and trapezoidal dies Polymer Engineering and Science. 21: 1101-1107. DOI: 10.1002/Pen.760211609 |
0.344 |
|
| 1981 |
White JL, Spruiell JE. Specification of biaxial orientation in amorphous and crystalline polymers Polymer Engineering and Science. 21: 859-868. DOI: 10.1002/Pen.760211309 |
0.348 |
|
| 1981 |
Knutsson BA, White JL, Abbas KB. Rheological and extrusion characteristics of glass fiber-reinforced polycarbonate† Journal of Applied Polymer Science. 26: 2347-2362. DOI: 10.1002/App.1981.070260721 |
0.312 |
|
| 1981 |
Shimamura K, White JL, Fellers JF. Hydroxypropylcellulose, a thermotropic liquid crystal: Characteristics and structure development in continuous extrusion and melt spinning Journal of Applied Polymer Science. 26: 2165-2180. DOI: 10.1002/App.1981.070260705 |
0.373 |
|
| 1981 |
White JL, Tanaka H. Elongational flow and melt‐spinning instability of concentrated suspensions of small particles in polymer melts Journal of Applied Polymer Science. 26: 579-589. DOI: 10.1002/App.1981.070260217 |
0.357 |
|
| 1981 |
Matsumoto K, Fellers JF, White JL. Uniaxial and biaxial orientation development and mechanical properties of polystyrene films Journal of Applied Polymer Science. 26: 85-96. DOI: 10.1002/App.1981.070260108 |
0.304 |
|
| 1980 |
White JL, Czarnecki L, Tanaka H. Experimental Studies of the Influence of Particle and Fiber Reinforcement on the Rheological Properties of Polymer Melts Rubber Chemistry and Technology. 53: 823-835. DOI: 10.5254/1.3535062 |
0.391 |
|
| 1980 |
White JL, Czarnecki L. Notes: On Papers by Chan, White, and Oyanagi and by Goddard on Elongational Flow Behavior of Fiber-Reinforced Polymer Melts Journal of Rheology. 24: 501-506. DOI: 10.1122/1.549569 |
0.359 |
|
| 1980 |
Onogi Y, White JL, Fellers JF. Rheo-optics of shear and elongational flow of liquid cystalline polymer solutions: hydroxypropyl cellulose/water and poly-p-phenylene terephthalamide/sulfuric acid Journal of Non-Newtonian Fluid Mechanics. 7: 121-151. DOI: 10.1016/0377-0257(80)85002-6 |
0.376 |
|
| 1980 |
Bheda J, Fellers JF, White JL. Phase behavior and structure of liquid crystalline solutions of cellulose derivatives Colloid and Polymer Science. 258: 1335-1342. DOI: 10.1007/Bf01668781 |
0.346 |
|
| 1980 |
Onogi Y, White JL, Fellers JF. Structural investigations of polymer liquid‐crystalline solutions: Aromatic polyamides, hydroxy propyl cellulose, and poly(γ‐benzyl‐L‐glutamate) Journal of Polymer Science Part B. 18: 663-682. DOI: 10.1002/Pol.1980.180180401 |
0.379 |
|
| 1980 |
Minoshima W, White JL, Spruiell JE. Experimental investigation of the influence of molecular weight distribution on the rheological properties of polypropylene melts Polymer Engineering and Science. 20: 1166-1176. DOI: 10.1002/Pen.760201710 |
0.354 |
|
| 1980 |
Hancock TA, White JL, Spruiell JE. Mechanism of formation of fluted void superstructures in the coagulation of wet spun fibers and application to membranes Polymer Engineering and Science. 20: 1126-1131. DOI: 10.1002/Pen.760201703 |
0.329 |
|
| 1980 |
Tanaka H, White JL. Experimental investigations of shear and elongational flow properties of polystyrene melts reinforced with calcium carbonate, titanium dioxide, and carbon black† Polymer Engineering and Science. 20: 949-956. DOI: 10.1002/Pen.760201406 |
0.347 |
|
| 1980 |
Young SS, White JL, Clark ES, Oyanagi Y. A basic experimental study of sandwich injection molding with sequential injection Polymer Engineering and Science. 20: 798-804. DOI: 10.1002/Pen.760201206 |
0.36 |
|
| 1980 |
Aoki H, Onogi Y, White JL, Fellers JF. Characterization and continuous extrusion of isotropic and anisotropic poly(p‐phenylene terephthalamide)/sulfuric acid solutions to form ribbons and blown film Polymer Engineering and Science. 20: 221-229. DOI: 10.1002/Pen.760200310 |
0.355 |
|
| 1980 |
Huang D, White JL. Experimental and theoretical investigation of extrudate swell of polymer melts from small (length)/(cross‐section) ratio slit and capillary dies Polymer Engineering and Science. 20: 182-189. DOI: 10.1002/Pen.760200303 |
0.404 |
|
| 1980 |
Choi KJ, White JL, Spruiell JE. Orientation development in tubular film extrusion of polystyrene Journal of Applied Polymer Science. 25: 2777-2788. DOI: 10.1002/App.1980.070251210 |
0.335 |
|
| 1980 |
Omotoso MAA, White JL, Fellers JF. Melt spinning of high‐impact polystyrene: Rubber morphology variations, orientation development, and mechanical properties Journal of Applied Polymer Science. 25: 1573-1585. DOI: 10.1002/App.1980.070250806 |
0.365 |
|
| 1980 |
Czarnecki L, White JL. Shear flow rheological properties, fiber damage, and mastication characteristics of aramid‐, glass‐, and cellulose‐fiber‐reinforced polystyrene melts Journal of Applied Polymer Science. 25: 1217-1244. DOI: 10.1002/App.1980.070250623 |
0.334 |
|
| 1979 |
White JL. A plastic-viscoelastic constitutive equation to represent the rheological behavior of concentrated suspensions of small particles in polymer melts Journal of Non-Newtonian Fluid Mechanics. 5: 177-190. DOI: 10.1016/0377-0257(79)85011-9 |
0.373 |
|
| 1979 |
White JL, Dietz W. Considerations of the "freezing-in" of flow-induced orientation in polymer melts by vitrification with application to processing Journal of Non-Newtonian Fluid Mechanics. 4: 299-323. DOI: 10.1016/0377-0257(79)80002-6 |
0.405 |
|
| 1979 |
White JL, Dietz W. Some relationships between injection molding conditions and the characteristics of vitrified molded parts Polymer Engineering and Science. 19: 1081-1091. DOI: 10.1002/Pen.760191504 |
0.382 |
|
| 1979 |
White JL. Rheological and energetic considerations of the fluid dynamics and scale‐up of mixing small particles into polymer melts in an internal mixer Polymer Engineering and Science. 19: 818-823. DOI: 10.1002/Pen.760191111 |
0.359 |
|
| 1979 |
Kitao T, Spruiell JE, White JL. The influence of drawing, twisting, heat setting and untwisting on the structure and mechanical properties of melt spun polypropylene filament Polymer Engineering and Science. 19: 761-773. DOI: 10.1002/Pen.760191102 |
0.328 |
|
| 1979 |
Lobe VM, White JL. An experimental study of the influence of carbon black on the rheological properties of a polystyrene melt Polymer Engineering and Science. 19: 617-624. DOI: 10.1002/Pen.760190905 |
0.352 |
|
| 1979 |
Aoki H, White JL, Fellers JF. A rheological and optical properties investigation of aliphatic (nylon 66, PγBLG) and aromatic (kelvar, nomex) polyamide solutions Journal of Applied Polymer Science. 23: 2293-2314. DOI: 10.1002/App.1979.070230808 |
0.343 |
|
| 1979 |
Harwood D, Aoki H, Lee Y, Fellers JF, White JL. Solution and rheological properties of poly(m‐phenyleneisophthalamide) in dimethylacetamide/LiCl Journal of Applied Polymer Science. 23: 2155-2168. DOI: 10.1002/App.1979.070230726 |
0.319 |
|
| 1979 |
Oyanagi Y, White JL. Basic study of extrusion of polyethylene and polystyrene foams Journal of Applied Polymer Science. 23: 1013-1026. DOI: 10.1002/App.1979.070230406 |
0.364 |
|
| 1978 |
Chan Y, White JL, Oyanagi Y. A Fundamental Study of the Rheological Properties of Glass‐Fiber‐Reinforced Polyethylene and Polystyrene Melts Journal of Rheology. 22: 507-524. DOI: 10.1122/1.549486 |
0.377 |
|
| 1978 |
Dietz W, White JL. Ein einfaches Modell zur Berechnung des Druckverlustes während des Werkzeugfüllvorganges und der eingefrorenen Orientierung beim Spritzgießen amorpher Kunststoffe Rheologica Acta. 17: 676-692. DOI: 10.1007/Bf01522040 |
0.312 |
|
| 1978 |
Dietz W, White JL, Clark ES. Orientation development and relaxation in injection molding of amorphous polymers Polymer Engineering and Science. 18: 273-281. DOI: 10.1002/Pen.760180407 |
0.374 |
|
| 1978 |
Chan Y, White JL, Oyanagi Y. Influence of glass fibers on the extrusion and injection molding characteristics of polyethylene and polystyrene melts Polymer Engineering and Science. 18: 268-272. DOI: 10.1002/Pen.760180406 |
0.343 |
|
| 1978 |
Oda K, White JL, Clark ES. Influence of melt deformation history on orientation in vitrified polymers Polymer Engineering and Science. 18: 53-59. DOI: 10.1002/Pen.760180111 |
0.4 |
|
| 1978 |
Danford MD, Spruiell JE, White JL. Structure development in the melt spinning of nylon 66 fibers and comparison to nylon 6 Journal of Applied Polymer Science. 22: 3351-3361. DOI: 10.1002/App.1978.070221201 |
0.305 |
|
| 1978 |
Nadella HP, Spruiell JE, White JL. Drawing and annealing of polypropylene fibers: Structural changes and mechanical properties Journal of Applied Polymer Science. 22: 3121-3133. DOI: 10.1002/App.1978.070221108 |
0.341 |
|
| 1978 |
White JL, Ide Y. Instabilities and failure in elongational flow and melt spinning of fibers Journal of Applied Polymer Science. 22: 3057-3074. DOI: 10.1002/App.1978.070221102 |
0.327 |
|
| 1978 |
Ide Y, White JL. Experimental study of elongational flow and failure of polymer melts Journal of Applied Polymer Science. 22: 1061-1079. DOI: 10.1002/App.1978.070220416 |
0.388 |
|
| 1977 |
White JL. Processability of Rubber and Rheological Behavior Rubber Chemistry and Technology. 50: 163-185. DOI: 10.5254/1.3535123 |
0.353 |
|
| 1977 |
Lenk RS, Fellers JF, White JL. Comparative study of polyamides from bisacid A2. Polymer Journal. 9: 9-17. DOI: 10.1295/Polymj.9.9 |
0.333 |
|
| 1977 |
White JL, Kondo A. Flow patterns in polyethylene and polystyrene melts during extrusion through a die entry region: measurement and interpretation Journal of Non-Newtonian Fluid Mechanics. 3: 41-64. DOI: 10.1016/0377-0257(77)80011-6 |
0.363 |
|
| 1977 |
Ide Y, White JL. Investigation of failure during elongational flow of polymer melts Journal of Non-Newtonian Fluid Mechanics. 2: 281-298. DOI: 10.1016/0377-0257(77)80005-0 |
0.323 |
|
| 1977 |
Nadella HP, Henson HM, Spruiell JE, White JL. Melt spinning of isotactic polypropylene: Structure development and relationship to mechanical properties Journal of Applied Polymer Science. 21: 3003-3022. DOI: 10.1002/App.1977.070211115 |
0.372 |
|
| 1977 |
Bankar VG, Spruiell JE, White JL. Melt spinning of nylon 6: Structure development and mechanical properties of as‐spun filaments Journal of Applied Polymer Science. 21: 2341-2358. DOI: 10.1002/App.1977.070210905 |
0.346 |
|
| 1977 |
White JL, Kondo A. Ends pressure losses in extrusion of polymer melts through dies Journal of Applied Polymer Science. 21: 2289-2292. DOI: 10.1002/App.1977.070210826 |
0.329 |
|
| 1977 |
Bankar VG, Spruiell JE, White JL. Melt‐spinning dynamics and rheological properties of nylon 6 Journal of Applied Polymer Science. 21: 2135-2155. DOI: 10.1002/App.1977.070210812 |
0.345 |
|
| 1977 |
Lenk RS, White JL, Fellers JF. A polyamide from bisacid A2 and p-phenylenediamine: Synthesis, properties, and fiber formation Journal of Applied Polymer Science. 21: 1543-1559. DOI: 10.1002/App.1977.070210610 |
0.389 |
|
| 1977 |
Hancock TA, Spruiell JE, White JL. Wet spinning of aliphatic and aromatic polyamides Journal of Applied Polymer Science. 21: 1227-1247. DOI: 10.1002/App.1977.070210506 |
0.316 |
|
| 1976 |
Furuta I, Lobe VM, White JL. Experimental study of the rheological properties of butadiene-styrene gum elastomers and compounds Journal of Non-Newtonian Fluid Mechanics. 1: 207-222. DOI: 10.1016/0377-0257(76)80021-3 |
0.321 |
|
| 1976 |
Oda K, White JL, Clark ES. Jetting phenomena in injection mold filling mold filling Polymer Engineering and Science. 16: 585-592. DOI: 10.1002/Pen.760160811 |
0.334 |
|
| 1976 |
Ide Y, White JL. The spinnability of polymer fluid filaments Journal of Applied Polymer Science. 20: 2511-2531. DOI: 10.1002/App.1976.070200919 |
0.319 |
|
| 1976 |
Sze GM, Spruiell JE, White JL. The influence of drawing, twisting, heat setting, and untwisting on the structure and mechanical properties of melt‐spun high‐density polyethylene fiber Journal of Applied Polymer Science. 20: 1823-1847. DOI: 10.1002/App.1976.070200712 |
0.333 |
|
| 1976 |
White JL, Roman JF. Extrudate swell during the melt spinning of fibers—influence of rheological properties and take‐up force Journal of Applied Polymer Science. 20: 1005-1023. DOI: 10.1002/App.1976.070200413 |
0.325 |
|
| 1976 |
Minagawa N, White JL. The influence of titanium dioxide on the rheological and extrusion properties of polymer melts Journal of Applied Polymer Science. 20: 501-523. DOI: 10.1002/App.1976.070200222 |
0.352 |
|
| 1975 |
Kotaka T, White JL. Thin-Layer Chromatographic Separations of Butadiene-Styrene Copolymers on the Basis of Composition and Molecular Weight Rubber Chemistry and Technology. 48: 310-328. DOI: 10.5254/1.3547456 |
0.327 |
|
| 1975 |
Minagawa N, White JL. Co‐extrusion of unfilled and TiO2‐filled polyethylene: Influence of viscosity and die cross‐section on interface shape Polymer Engineering and Science. 15: 825-830. DOI: 10.1002/Pen.760151202 |
0.364 |
|
| 1975 |
Spruiell JE, White JL. Structure development during polymer processing: Studies of the melt spinning of polyethylene and polypropylene fibers Polymer Engineering and Science. 15: 660-667. DOI: 10.1002/Pen.760150905 |
0.397 |
|
| 1975 |
White JL, Lee B. An experimental study of sandwich injection molding of two polymer melts using simultaneous injection Polymer Engineering and Science. 15: 481-485. DOI: 10.1002/Pen.760150702 |
0.36 |
|
| 1975 |
White JL. Fluid mechanical analysis of injection mold filling Polymer Engineering and Science. 15: 44-50. DOI: 10.1002/Pen.760150108 |
0.367 |
|
| 1975 |
Ide Y, White JL. Rheological phenomena during the polymerization of styrene in a stirred tank Journal of Applied Polymer Science. 19: 719-727. DOI: 10.1002/App.1975.070190309 |
0.35 |
|
| 1974 |
Lee B, White JL. An Experimental Study of Rheological Properties of Polymer Melts in Laminar Shear Flow and of Interface Deformation and Its Mechanisms in Two-Phase Stratified Flow Journal of Rheology. 18: 467-492. DOI: 10.1122/1.549344 |
0.379 |
|
| 1974 |
White JL, Dee HB. Flow visualization for injection molding of polyethylene and polystyrene melts Polymer Engineering and Science. 14: 212-222. DOI: 10.1002/Pen.760140310 |
0.353 |
|
| 1974 |
Ide Y, White JL. Rheological phenomena in polymerization reactors: Rheological properties and flow patterns around agitators in polystyrene–styrene solutions Journal of Applied Polymer Science. 18: 2997-3018. DOI: 10.1002/App.1974.070181012 |
0.339 |
|
| 1974 |
White JL, Dharod KC, Clark ES. Interaction of melt spinning and drawing variables on the crystalline morphology and mechanical properties of high‐density and low‐density polyethylene fiber Journal of Applied Polymer Science. 18: 2539-2568. DOI: 10.1002/App.1974.070180901 |
0.327 |
|
| 1974 |
White JL, Crowder JW. The influence of carbon black on the extrusion characteristics and rheological properties of elastomers: Polybutadiene and butadiene–styrene copolymer Journal of Applied Polymer Science. 18: 1013-1038. DOI: 10.1002/App.1974.070180405 |
0.33 |
|
| 1973 |
Sadakne GS, White JL. An experimental study of adsorption of polymers on activated carbon: Butadiene—styrene polymers and poly(methyl methacrylate) Journal of Applied Polymer Science. 17: 453-469. DOI: 10.1002/App.1973.070170211 |
0.331 |
|
| 1972 |
Yamamoto M, White JL. Excluded Volume Expansion of a Polymer Chain in a Mixed Solvent Macromolecules. 5: 58-63. DOI: 10.1021/Ma60025A015 |
0.334 |
|
| 1972 |
White JL, Salladay DG, Quisenberry DO, MacLean DL. Gel permeation and thin‐layer chromatographic characterization and solution properties of butadiene and styrene homopolymers and copolymers Journal of Applied Polymer Science. 16: 2811-2827. DOI: 10.1002/App.1972.070161108 |
0.366 |
|
| 1972 |
White JL, Ufford RC, Dharod KR, Price RL. Experimental and theoretical study of the extrusion of two‐phase molten polymer systems Journal of Applied Polymer Science. 16: 1313-1330. DOI: 10.1002/App.1972.070160601 |
0.389 |
|
| 1972 |
Mehta RU, White JL. Blocking and copolymer heterogeneity in anionic copolymerization in industrial reactors Journal of Applied Polymer Science. 16: 885-903. DOI: 10.1002/App.1972.070160408 |
0.323 |
|
| 1971 |
Yamamoto M, White JL, MacLean DL. Statistical thermodynamics of solutions of polymers in mixed solvents Polymer. 12: 290-308. DOI: 10.1016/0032-3861(71)90052-8 |
0.362 |
|
| 1971 |
Yamamoto M, White JL. Theory of deformation and strain-induced crystallization of an elastomeric network polymer Journal of Polymer Science Part a-2: Polymer Physics. 9: 1399-1415. DOI: 10.1002/Pol.1971.160090804 |
0.349 |
|
| 1971 |
Ballenger TF, White JL. The development of the velocity field in polymer melts in a reservoir approaching a capillary die Journal of Applied Polymer Science. 15: 1949-1962. DOI: 10.1002/App.1971.070150813 |
0.365 |
|
| 1971 |
Nishida N, Salladay DG, White JL. Molecular weight distribution and rheological properties of polyisobutylene solutions Journal of Applied Polymer Science. 15: 1181-1194. DOI: 10.1002/App.1971.070150513 |
0.314 |
|
| 1970 |
White JL, Yamamoto M. Lattice Theory of Melting of a Crystalline Polymer Journal of the Physical Society of Japan. 28: 891-897. DOI: 10.1143/Jpsj.28.891 |
0.347 |
|
| 1970 |
Ballenger TF, White JL. An experimental study of flow patterns in polymer fluids in the reservoir of a capillary rheometer Chemical Engineering Science. 25: 1191-1195. DOI: 10.1016/0009-2509(70)85009-6 |
0.355 |
|
| 1969 |
White JL. Extrusion of Polymer Melts and Melt Flow Instabilities. III. Theoretical Analysis of Extrusion through a Slit Die Rubber Chemistry and Technology. 42: 691-699. DOI: 10.5254/1.3539250 |
0.38 |
|
| 1969 |
Bialas GA, White JL. Extrusion of Polymer Melts and Melt Flow Instabilities. II. Site of Initiation and Mechanism of Melt Flow Instability Rubber Chemistry and Technology. 42: 682-690. DOI: 10.5254/1.3539249 |
0.347 |
|
| 1969 |
Bialas GA, White JL. Extrusion of Polymer Melts and Melt Flow Instabilities. I. Experimental Study of Capillary Flow and Extrudate Distortion Rubber Chemistry and Technology. 42: 675-681. DOI: 10.5254/1.3539248 |
0.4 |
|
| 1968 |
White JL, Tokita N. Instability and failure phenomena in polymer processing with application to elastomer mill behavior Journal of Applied Polymer Science. 12: 1589-1600. DOI: 10.1002/App.1968.070120709 |
0.342 |
|
| Show low-probability matches. |
