Year |
Citation |
Score |
2020 |
Fang ZZ, Ren C, Simmons M, Sun P. The effect of Ni doping on the mechanical behavior of tungsten International Journal of Refractory Metals and Hard Materials. 92: 105281. DOI: 10.1016/J.Ijrmhm.2020.105281 |
0.338 |
|
2020 |
Zhang Y, Lu W, Sun P, Fang ZZ, Qiao S, Zhang Y, Zheng S. Deoxygenation of Ti metal: A review of processes in literature International Journal of Refractory Metals and Hard Materials. 91: 105270. DOI: 10.1016/J.Ijrmhm.2020.105270 |
0.324 |
|
2020 |
Dunstan MK, Paramore JD, Fang ZZ, Ligda JP, Butler BG. Analysis of microstructural facet fatigue failure in ultra-fine grained powder metallurgy Ti-6Al-4V produced through hydrogen sintering International Journal of Fatigue. 131: 105355. DOI: 10.1016/J.Ijfatigue.2019.105355 |
0.344 |
|
2020 |
Dunstan MK, Simpson B, Sun P, Koopman M, Fang ZZ. Effects of Process Gas Pressure and Type on Oxygen Content in Sintered Titanium Produced using Jet-Milled Titanium Hydride Powders Jom. 72: 1286-1291. DOI: 10.1007/S11837-020-04010-0 |
0.354 |
|
2020 |
Mann AE, Sun P, Kergaye O, McNeill W, Xia Y, Yousefiani A, Fang ZZ. Analysis of the Elevated Temperature Plastic Flow Response of Ti-6Al-4V Produced via the Hydrogen Sintering and Phase Transformation (HSPT) Process Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 3956-3966. DOI: 10.1007/S11661-020-05804-2 |
0.372 |
|
2019 |
Zhou C, Bowman RC, Fang ZZ, Lu J, Xu L, Sun P, Liu H, Wu H, Liu Y. Amorphous TiCu-based Additives for Improving Hydrogen Storage Properties of Magnesium Hydride. Acs Applied Materials & Interfaces. PMID 31559817 DOI: 10.1021/Acsami.9B16076 |
0.473 |
|
2019 |
Zhu X, Zheng S, Zhang Y, Fang ZZ, Zhang M, Sun P, Li Q, Zhang Y, Li P, Jin W. Potentially More Ecofriendly Chemical Pathway for Production of High-Purity TiO2 from Titanium Slag Acs Sustainable Chemistry & Engineering. 7: 4821-4830. DOI: 10.1021/Acssuschemeng.8B05102 |
0.338 |
|
2019 |
Barton J, Buchenauer D, Wampler W, Rudakov D, Fang Z, Lasnier C, Whaley J, Watkins J, Unterberg E, Kolasinski R, Guo H. Retention properties in displacement damaged ultra-fine grain tungsten exposed to divertor plasma Nuclear Materials and Energy. 20: 100689. DOI: 10.1016/J.Nme.2019.100689 |
0.304 |
|
2019 |
Li J, Zhou C, Fang ZZ, Bowman Jr. RC, Lu J, Ren C. Isothermal hydrogenation kinetics of ball-milled nano-catalyzed magnesium hydride Materialia. 5: 100227. DOI: 10.1016/J.Mtla.2019.100227 |
0.412 |
|
2019 |
Dunstan MK, Paramore JD, Fang ZZ, Sun P. Manipulation of microstructure and mechanical properties during dehydrogenation of hydrogen-sintered Ti–6Al–4V Materials Science and Engineering: A. 764: 138244. DOI: 10.1016/J.Msea.2019.138244 |
0.403 |
|
2019 |
Zhou C, Fang ZZ, Sun P, Xu L, Liu Y. Capturing low-pressure hydrogen using V Ti Cr catalyzed magnesium hydride Journal of Power Sources. 413: 139-147. DOI: 10.1016/J.Jpowsour.2018.12.048 |
0.356 |
|
2019 |
Li Q, Zhu X, Zhang Y, Fang ZZ, Zheng S, Sun P, Xia Y, Li P, Zhang Y, Zou X. An investigation of the reduction of TiO2 by Mg in H2 atmosphere Chemical Engineering Science. 195: 484-493. DOI: 10.1016/J.Ces.2018.09.047 |
0.387 |
|
2019 |
Ren C, Fang ZZ, Xu L, Ligda JP, Paramore JD, Butler BG. An investigation of the microstructure and ductility of annealed cold-rolled tungsten Acta Materialia. 162: 202-213. DOI: 10.1016/J.Actamat.2018.10.002 |
0.367 |
|
2018 |
Dunstan MK, Paramore JD, Fang ZZ. Gaseous isostatic forging: Design and application to powder metallurgy Ti-6Al-4V Journal of Materials Processing Technology. 259: 292-304. DOI: 10.1016/J.Jmatprotec.2018.04.039 |
0.422 |
|
2018 |
Butler BG, Paramore JD, Ligda JP, Ren C, Fang ZZ, Middlemas SC, Hemker KJ. Mechanisms of deformation and ductility in tungsten – A review International Journal of Refractory Metals and Hard Materials. 75: 248-261. DOI: 10.1016/J.Ijrmhm.2018.04.021 |
0.314 |
|
2018 |
Ren C, Fang Z, Koopman M, Butler B, Paramore J, Middlemas S. Methods for improving ductility of tungsten - A review International Journal of Refractory Metals and Hard Materials. 75: 170-183. DOI: 10.1016/J.Ijrmhm.2018.04.012 |
0.392 |
|
2018 |
Xia Y, Fang ZZ, Fan D, Sun P, Zhang Y, Zhu J. Hydrogen enhanced thermodynamic properties and kinetics of calciothermic deoxygenation of titanium-oxygen solid solutions International Journal of Hydrogen Energy. 43: 11939-11951. DOI: 10.1016/J.Ijhydene.2018.03.170 |
0.322 |
|
2018 |
Dunstan MK, Paramore JD, Fang ZZ. The effects of microstructure and porosity on the competing fatigue failure mechanisms in powder metallurgy Ti-6Al-4V International Journal of Fatigue. 116: 584-591. DOI: 10.1016/J.Ijfatigue.2018.07.006 |
0.341 |
|
2018 |
Ren C, Fang ZZ, Koopman M, Zhang H. The Effects of Molybdenum Additions on the Sintering and Mechanical Behavior of Ultrafine-Grained Tungsten Jom. 70: 2567-2573. DOI: 10.1007/S11837-018-3119-2 |
0.376 |
|
2018 |
Xia Y, Fang ZZ, Sun P, Zhang Y, Zhu J. Novel Method for Making Biomedical Segregation-Free Ti-30Ta Alloy Spherical Powder for Additive Manufacturing Jom. 70: 364-369. DOI: 10.1007/S11837-017-2713-Z |
0.426 |
|
2018 |
Lefler H, Fang ZZ, Zhang Y, Sun P, Xia Y. Mechanisms of Hydrogen-Assisted Magnesiothermic Reduction of TiO2 Metallurgical and Materials Transactions B. 49: 2998-3006. DOI: 10.1007/S11663-018-1399-0 |
0.425 |
|
2017 |
Paramore JD, Fang ZZ, Dunstan M, Sun P, Butler BG. Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys. Scientific Reports. 7: 41444. PMID 28145527 DOI: 10.1038/Srep41444 |
0.402 |
|
2017 |
Xia Y, Fang ZZ, Zhang Y, Lefler H, Zhang T, Sun P, Huang Z. Hydrogen Assisted Magnesiothermic Reduction (HAMR) of Commercial TiO2 to Produce Titanium Powder with Controlled Morphology and Particle Size Materials Transactions. 58: 355-360. DOI: 10.2320/Matertrans.Mk201628 |
0.327 |
|
2017 |
Fang ZZ, Paramore JD, Sun P, Chandran KSR, Zhang Y, Xia Y, Cao F, Koopman M, Free M. Powder metallurgy of titanium – past, present, and future International Materials Reviews. 63: 407-459. DOI: 10.1080/09506608.2017.1366003 |
0.412 |
|
2017 |
Fang ZZ, Wang H, Kumar V. Coarsening, densification, and grain growth during sintering of nano-sized powders—A perspective International Journal of Refractory Metals and Hard Materials. 62: 110-117. DOI: 10.1016/J.Ijrmhm.2016.09.004 |
0.505 |
|
2017 |
Lefler H, Zhang Y, Fang ZZ, Free M, Huang Z. Removal of silicon from highly acidic HCl medium to produce purified TiO2 Hydrometallurgy. 173: 218-223. DOI: 10.1016/J.Hydromet.2017.08.023 |
0.363 |
|
2017 |
Zhang Y, Fang ZZ, Sun P, Xia Y, Free M, Huang Z, Lefler H, Zhang T, Guo J. Kinetically enhanced metallothermic redox of TiO2 by Mg in molten salt Chemical Engineering Journal. 327: 169-182. DOI: 10.1016/J.Cej.2017.06.060 |
0.346 |
|
2017 |
Zhang Y, Fang ZZ, Xia Y, Sun P, Van Devener B, Free M, Lefler H, Zheng S. Hydrogen assisted magnesiothermic reduction of TiO2 Chemical Engineering Journal. 308: 299-310. DOI: 10.1016/J.Cej.2016.09.066 |
0.403 |
|
2017 |
Sun P, Fang ZZ, Zhang Y, Xia Y. Microstructure and Mechanical Properties of Ti-6Al-4V Fabricated by Selective Laser Melting of Powder Produced by Granulation-Sintering-Deoxygenation Method Jom. 69: 2731-2737. DOI: 10.1007/S11837-017-2584-3 |
0.403 |
|
2017 |
Sun P, Fang ZZ, Zhang Y, Xia Y. Review of the Methods for Production of Spherical Ti and Ti Alloy Powder Jom. 69: 1853-1860. DOI: 10.1007/S11837-017-2513-5 |
0.396 |
|
2017 |
Zhang Y, Fang ZZ, Sun P, Zheng S, Xia Y, Free M. A Perspective on Thermochemical and Electrochemical Processes for Titanium Metal Production Jom. 69: 1861-1868. DOI: 10.1007/S11837-017-2481-9 |
0.326 |
|
2016 |
Zhang Y, Fang ZZ, Sun P, Zhang T, Xia Y, Zhou C, Huang Z. Thermodynamic destabilization of Ti-O solid solution by H2 and de-oxygenation of Ti using Mg. Journal of the American Chemical Society. PMID 27196140 DOI: 10.1021/Jacs.6B00845 |
0.338 |
|
2016 |
Dunstan M, Fang ZZ, Koopman M, Paramore J. Powder Metallurgy Ti-6Al-4V Alloy with Wrought-Like Microstructure and Mechanical Properties by Hydrogen Sintering Key Engineering Materials. 704: 3-14. DOI: 10.4028/Www.Scientific.Net/Kem.704.3 |
0.423 |
|
2016 |
Kumar V, Fang ZZ, Wang H, Shetty DK. Geometric model of sintering of unequal-sized particles Powder Metallurgy. 59: 170-180. DOI: 10.1080/00325899.2016.1148915 |
0.52 |
|
2016 |
Sun P, Fang ZZ, Xia Y, Zhang Y, Zhou C. A novel method for production of spherical Ti-6Al-4V powder for additive manufacturing Powder Technology. 301: 331-335. DOI: 10.1016/J.Powtec.2016.06.022 |
0.395 |
|
2016 |
Ren C, Fang ZZ, Zhang H, Koopman M. The study on low temperature sintering of nano-tungsten powders International Journal of Refractory Metals and Hard Materials. 61: 273-278. DOI: 10.1016/J.Ijrmhm.2016.10.003 |
0.382 |
|
2016 |
Kolasinski RD, Buchenauer DA, Doerner RP, Fang ZZ, Ren C, Oya Y, Michibayashi K, Friddle RW, Mills BE. High-flux plasma exposure of ultra-fine grain tungsten International Journal of Refractory Metals and Hard Materials. 60: 28-36. DOI: 10.1016/J.Ijrmhm.2016.05.006 |
0.34 |
|
2016 |
Zhang Y, Fang ZZ, Xia Y, Huang Z, Lefler H, Zhang T, Sun P, Free ML, Guo J. A novel chemical pathway for energy efficient production of Ti metal from upgraded titanium slag Chemical Engineering Journal. 286: 517-527. DOI: 10.1016/J.Cej.2015.10.090 |
0.366 |
|
2016 |
Ren C, Koopman M, Fang ZZ, Zhang H. The Effects of Atmosphere on the Sintering of Ultrafine-Grained Tungsten with Ti Jom. 1-5. DOI: 10.1007/S11837-016-2121-9 |
0.372 |
|
2016 |
Kumar P, Ravi Chandran KS, Cao F, Koopman M, Fang ZZ. The Nature of Tensile Ductility as Controlled by Extreme-Sized Pores in Powder Metallurgy Ti-6Al-4V Alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-12. DOI: 10.1007/S11661-016-3419-5 |
0.368 |
|
2015 |
Rönnebro E, Whyatt G, Powell M, Westman M, Zheng F, Fang Z. Metal Hydrides for High-Temperature Power Generation Energies. 8: 8406-8430. DOI: 10.3390/En8088406 |
0.32 |
|
2015 |
Zhou C, Fang ZZ, Bowman RC, Xia Y, Lu J, Luo X, Ren Y. Stability of Catalyzed Magnesium Hydride Nanocrystalline During Hydrogen Cycling. Part II: Microstructure Evolution Journal of Physical Chemistry C. 119: 22272-22280. DOI: 10.1021/Acs.Jpcc.5B06192 |
0.718 |
|
2015 |
Zhou C, Fang ZZ, Bowman RC. Stability of Catalyzed Magnesium Hydride Nanocrystalline During Hydrogen Cycling. Part I: Kinetic Analysis Journal of Physical Chemistry C. 119: 22261-22271. DOI: 10.1021/Acs.Jpcc.5B06190 |
0.36 |
|
2015 |
Emery SB, Sorte EG, Bowman RC, Fang ZZ, Ren C, Majzoub EH, Conradi MS. Detection of fluorite-structured MgD2/TiD2: Deuterium NMR Journal of Physical Chemistry C. 119: 7656-7661. DOI: 10.1021/Acs.Jpcc.5B01409 |
0.304 |
|
2015 |
Paramore JD, Fang ZZ, Sun P, Koopman M, Chandran KSR, Dunstan M. A powder metallurgy method for manufacturing Ti-6Al-4V with wrought-like microstructures and mechanical properties via hydrogen sintering and phase transformation (HSPT) Scripta Materialia. 107: 103-106. DOI: 10.1016/J.Scriptamat.2015.05.032 |
0.404 |
|
2015 |
Cao F, Kumar P, Koopman M, Lin C, Fang ZZ, Chandran KSR. Understanding competing fatigue mechanisms in powder metallurgy Ti-6Al-4V alloy: Role of crack initiation and duality of fatigue response Materials Science and Engineering A. 630: 139-145. DOI: 10.1016/J.Msea.2015.02.028 |
0.312 |
|
2015 |
Zhou C, Fang ZZ, Sun P. An experimental survey of additives for improving dehydrogenation properties of magnesium hydride Journal of Power Sources. 278: 38-42. DOI: 10.1016/J.Jpowsour.2014.12.039 |
0.381 |
|
2015 |
Middlemas S, Fang ZZ, Fan P. Life cycle assessment comparison of emerging and traditional Titanium dioxide manufacturing processes Journal of Cleaner Production. 89: 137-147. DOI: 10.1016/J.Jclepro.2014.11.019 |
0.752 |
|
2015 |
Fang ZZ, Zhou C, Fan P, Udell KS, Bowman RC, Vajo JJ, Purewal JJ, Kekelia B. Metal hydrides based high energy density thermal battery Journal of Alloys and Compounds. 645: S184-S189. DOI: 10.1016/J.Jallcom.2014.12.260 |
0.324 |
|
2015 |
Sun P, Fang ZZ, Koopman M, Paramore J, Chandran KSR, Ren Y, Lu J. An experimental study of the (Ti-6Al-4V)-xH phase diagram using in situ synchrotron XRD and TGA/DSC techniques Acta Materialia. 84: 29-41. DOI: 10.1016/J.Actamat.2014.10.045 |
0.497 |
|
2015 |
Sun P, Fang ZZ, Koopman M, Xia Y, Paramore J, Ravi Chandran KS, Ren Y, Lu J. Phase Transformations and Formation of Ultra-Fine Microstructure During Hydrogen Sintering and Phase Transformation (HSPT) Processing of Ti-6Al-4V Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. DOI: 10.1007/S11661-015-3141-8 |
0.483 |
|
2014 |
Ren C, Fang ZZ, Zhou C, Lu J, Ren Y, Zhang X. Hydrogen Storage Properties of Magnesium Hydride with V-Based Additives Journal of Physical Chemistry C. 118: 21778-21784. DOI: 10.1021/Jp504766B |
0.448 |
|
2014 |
Zhou C, Fang ZZ, Lu J, Luo X, Ren C, Fan P, Ren Y, Zhang X. Thermodynamic Destabilization of Magnesium Hydride Using Mg-Based Solid Solution Alloys The Journal of Physical Chemistry C. 118: 11526-11535. DOI: 10.1021/Jp501306W |
0.726 |
|
2014 |
Li P, Liu Z, Cui L, Zhai F, Wan Q, Li Z, Fang ZZ, Volinsky AA, Qu X. Tungsten carbide synthesized by low-temperature combustion as gas diffusion electrode catalyst International Journal of Hydrogen Energy. 39: 10911-10920. DOI: 10.1016/J.Ijhydene.2014.04.173 |
0.349 |
|
2014 |
Li J, Fan P, Fang ZZ, Zhou C. Kinetics of isothermal hydrogenation of magnesium with TiH2 additive International Journal of Hydrogen Energy. 39: 7373-7381. DOI: 10.1016/J.Ijhydene.2014.02.159 |
0.346 |
|
2014 |
Ren C, Fang ZZ, Zhou C, Lu J, Ren Y, Zhang X, Luo X. In situ X-ray diffraction study of dehydrogenation of MgH2 with Ti-based additives International Journal of Hydrogen Energy. 39: 5868-5873. DOI: 10.1016/J.Ijhydene.2014.01.152 |
0.725 |
|
2014 |
Ren C, Fang ZZ, Zhou C, Lu J, Ren Y, Zhang X. Hydrogen storage properties of magnesium hydride with V-based additives Journal of Physical Chemistry C. 118: 21778-21784. |
0.369 |
|
2013 |
Fang ZZ, Middlemas S, Guo J, Fan P. A new, energy-efficient chemical pathway for extracting Ti metal from Ti minerals. Journal of the American Chemical Society. 135: 18248-51. PMID 24256474 DOI: 10.1021/Ja408118X |
0.756 |
|
2013 |
Zhou C, Fang ZZ, Lu J, Zhang X. Thermodynamic and kinetic destabilization of magnesium hydride using Mg-In solid solution alloys. Journal of the American Chemical Society. 135: 10982-5. PMID 23855837 DOI: 10.1021/Ja4058794 |
0.434 |
|
2013 |
Liu B, Abouimrane A, Brown DE, Zhang X, Ren Y, Fang ZZ, Amine K. Mechanically alloyed composite anode materials based on SiO-Sn xFeyCz for Li-ion batteries Journal of Materials Chemistry A. 1: 4376-4382. DOI: 10.1039/C3Ta00101F |
0.519 |
|
2013 |
Zhou C, Fang ZZ, Ren C, Li J, Lu J. Effect of Ti intermetallic catalysts on hydrogen storage properties of magnesium hydride Journal of Physical Chemistry C. 117: 12973-12980. DOI: 10.1021/Jp402770P |
0.439 |
|
2013 |
Guo J, Koopman M, Fang ZZ, Wang X, Fan P, Rowe MC. FE-EPMA measurements of compositional gradients in cemented tungsten carbides International Journal of Refractory Metals and Hard Materials. 36: 265-270. DOI: 10.1016/J.Ijrmhm.2012.10.003 |
0.383 |
|
2013 |
Wang X, Hwang KS, Koopman M, Fang ZZ, Zhang L. Mechanical properties and wear resistance of functionally graded WC-Co International Journal of Refractory Metals and Hard Materials. 36: 46-51. DOI: 10.1016/J.Ijrmhm.2012.04.011 |
0.341 |
|
2013 |
Fan P, Fang ZZ, Guo J. A review of liquid phase migration and methods for fabrication of functionally graded cemented tungsten carbide International Journal of Refractory Metals and Hard Materials. 36: 2-9. DOI: 10.1016/J.Ijrmhm.2012.02.006 |
0.408 |
|
2013 |
Middlemas S, Fang ZZ, Fan P. A new method for production of titanium dioxide pigment Hydrometallurgy. 131: 107-113. DOI: 10.1016/J.Hydromet.2012.11.002 |
0.757 |
|
2013 |
Yang B, Chen H, Yang L, Zhang H, Fang ZZ. The formation of twins in Al-10Zn-3Mg-1.8Cu alloy by cryomilling Jom. 65: 967-972. DOI: 10.1007/S11837-013-0640-1 |
0.327 |
|
2013 |
Sun P, Fang ZZ, Koopman M. A comparison of hydrogen sintering and phase transformation (HSPT) processing with vacuum sintering of CP-Ti Advanced Engineering Materials. 15: 1007-1013. DOI: 10.1002/Adem.201300017 |
0.393 |
|
2012 |
Fang ZZ, Sun P. Pathways to optimize performance/cost ratio of powder metallurgy titanium - A perspective Key Engineering Materials. 520: 15-23. DOI: 10.4028/Www.Scientific.Net/Kem.520.15 |
0.339 |
|
2012 |
Liu B, Abouimrane A, Ren Y, Balasubramanian M, Wang D, Fang ZZ, Amine K. New anode material based on SiO-SnxCoyCz for lithium batteries Chemistry of Materials. 24: 4653-4661. DOI: 10.1021/Cm3017853 |
0.529 |
|
2012 |
Tahvilian L, Fang ZZ. An investigation on thermal residual stresses in a cylindrical functionally graded WC-Co component Materials Science and Engineering A. 557: 106-112. DOI: 10.1016/J.Msea.2012.06.072 |
0.684 |
|
2012 |
Sachdev AK, Kulkarni K, Fang ZZ, Yang R, Girshov V. Titanium for automotive applications: Challenges and opportunities in materials and processing Jom. 64: 553-565. DOI: 10.1007/S11837-012-0310-8 |
0.315 |
|
2012 |
Fang ZZ, Sun P, Wang H. Hydrogen sintering of titanium to produce high density fine grain titanium alloys Advanced Engineering Materials. 14: 383-387. DOI: 10.1002/Adem.201100269 |
0.42 |
|
2012 |
Sun P, Fang ZZ. Sintering of CP-Ti by the hydrogen sintering and phase transformation (HSPT) process Advances in Powder Metallurgy and Particulate Materials - 2012, Proceedings of the 2012 International Conference On Powder Metallurgy and Particulate Materials, Powdermet 2012. 952-957. |
0.311 |
|
2011 |
Choi YJ, Lu J, Sohn HY, Fang ZZ, Kim C, Bowman RC, Hwang SJ. Reaction mechanisms in the Li3AlH6/LiBH4 and Al/LiBH4 systems for reversible hydrogen storage. Part 2: Solid-state NMR studies Journal of Physical Chemistry C. 115: 6048-6056. DOI: 10.1021/Jp109113F |
0.327 |
|
2011 |
Choi YJ, Lu J, Sohn HY, Fang ZZ. Reaction mechanisms in the Li3AlH6/LiBH4 and Al/LiBH4 systems for reversible hydrogen storage. Part 1: H capacity and role of Al Journal of Physical Chemistry C. 115: 6040-6047. DOI: 10.1021/Jp109112T |
0.342 |
|
2011 |
Yang B, Gan G, Yang L, Sun M, Zhang H, Fang ZZ. Microstructural characterization and wear behavior of in situ TiC/7075 composites synthesized by displacement reactions and spray forming Materials Science and Engineering A. 528: 5649-5655. DOI: 10.1016/J.Msea.2010.09.103 |
0.405 |
|
2011 |
Guo J, Fang ZZ, Fan P, Wang X. Kinetics of the formation of metal binder gradient in WC-Co by carbon diffusion induced liquid migration Acta Materialia. 59: 4719-4731. DOI: 10.1016/J.Actamat.2011.04.019 |
0.424 |
|
2011 |
Wang H, Fang ZZ, Hwang KS. Kinetics of Initial Coarsening During Sintering of Nanosized Powders Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 42: 3534-3542. DOI: 10.1007/S11661-011-0751-7 |
0.354 |
|
2010 |
Lu J, Choi YJ, Fang ZZ, Sohn HY, Rönnebro E. Hydrogenation of nanocrystalline Mg at room temperature in the presence of TiH(2). Journal of the American Chemical Society. 132: 6616-7. PMID 20423100 DOI: 10.1021/Ja910944W |
0.43 |
|
2010 |
Wang H, Lefler M, Fang ZZ, Lei T, Fang S, Zhang J, Zhao Q. Titanium and titanium alloy via sintering of TiH2 Key Engineering Materials. 436: 157-163. DOI: 10.4028/Www.Scientific.Net/Kem.436.157 |
0.397 |
|
2010 |
Kumar V, Fang ZZ, Fife PC. Phase field simulations of grain growth during sintering of two unequal-sized particles Materials Science and Engineering A. 528: 254-259. DOI: 10.1016/J.Msea.2010.08.061 |
0.529 |
|
2010 |
Lu J, Choi YJ, Fang ZZ, Sohn HY. Effect of milling intensity on the formation of LiMgN from the dehydrogenation of LiNH2-MgH2 (1:1) mixture Journal of Power Sources. 195: 1992-1997. DOI: 10.1016/J.Jpowsour.2009.10.032 |
0.365 |
|
2010 |
Choi JW, Sohn HY, Choi YJ, Fang ZZ. Chemical vapor synthesis and characterization of aluminum nanopowder Journal of Power Sources. 195: 1463-1471. DOI: 10.1016/J.Jpowsour.2009.09.007 |
0.346 |
|
2010 |
Zhang H, Lu Q, Zhang L, Fang ZZ. Dependence of microcrack number density on microstructural parameters during plastic deformation of WC-Co composite International Journal of Refractory Metals and Hard Materials. 28: 434-440. DOI: 10.1016/J.Ijrmhm.2010.01.005 |
0.316 |
|
2010 |
Guo J, Fan P, Wang X, Fang ZZ. Formation of Co-capping during sintering of straight WC-10 wt% Co International Journal of Refractory Metals and Hard Materials. 28: 317-323. DOI: 10.1016/J.Ijrmhm.2009.11.005 |
0.397 |
|
2010 |
Wang H, Fang ZZ, Hwang KS, Zhang H, Siddle D. Sinter-ability of nanocrystalline tungsten powder International Journal of Refractory Metals and Hard Materials. 28: 312-316. DOI: 10.1016/J.Ijrmhm.2009.11.003 |
0.422 |
|
2010 |
Ryu T, Olivas-Martinez M, Sohn HY, Fang ZZ, Ring TA. Computational fluid dynamics simulation of chemical vapor synthesis of WC nanopowder from tungsten hexachloride Chemical Engineering Science. 65: 1773-1780. DOI: 10.1016/J.Ces.2009.11.016 |
0.313 |
|
2010 |
Fang ZZ. Sintering of Advanced Materials Sintering of Advanced Materials. 1-483. |
0.302 |
|
2010 |
Guo J, Fan P, Wang X, Fang ZZ. A novel approach for manufacturing functionally graded cemented tungsten carbide composites Advances in Powder Metallurgy and Particulate Materials - 2010, Proceedings of the 2010 International Conference On Powder Metallurgy and Particulate Materials, Powdermet 2010. 829-839. |
0.339 |
|
2009 |
Lu J, Choi YJ, Fang ZZ, Sohn HY, Rönnebro E. Hydrogen storage properties of nanosized MgH2-0.1TiH2 prepared by ultrahigh-energy-high-pressure milling. Journal of the American Chemical Society. 131: 15843-52. PMID 19810732 DOI: 10.1021/Ja906340U |
0.47 |
|
2009 |
Ryu T, Sohn HY, Hwang KS, Fang ZZ. Plasma synthesis of tungsten carbide nanopowder from ammonium paratungstate Journal of the American Ceramic Society. 92: 655-660. DOI: 10.1111/J.1551-2916.2009.02961.X |
0.367 |
|
2009 |
Choi YJ, Lu J, Sohn HY, Fang ZZ, Rönnebro E. Effect of milling parameters on the dehydrogenation properties of the Mg-Ti-H system Journal of Physical Chemistry C. 113: 19344-19350. DOI: 10.1021/Jp907218T |
0.375 |
|
2009 |
Ryu T, Sohn HY, Hwang KS, Fang ZZ. Plasma synthesis of tungsten carbide and cobalt nanocomposite powder Journal of Alloys and Compounds. 481: 274-277. DOI: 10.1016/J.Jallcom.2009.03.134 |
0.4 |
|
2009 |
Fan P, Guo J, Fang ZZ, Prichard P. Design of cobalt gradient via controlling carbon content and WC grain size in liquid-phase-sintered WC-Co composite International Journal of Refractory Metals and Hard Materials. 27: 256-260. DOI: 10.1016/J.Ijrmhm.2008.08.002 |
0.395 |
|
2009 |
Zhang H, Fang ZZ, Lu Q. Characterization of a bilayer WC-Co hardmetal using Hertzian indentation technique International Journal of Refractory Metals and Hard Materials. 27: 317-322. DOI: 10.1016/J.Ijrmhm.2008.07.014 |
0.344 |
|
2009 |
Fang ZZ, Wang X, Ryu T, Hwang KS, Sohn HY. Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide - A review International Journal of Refractory Metals and Hard Materials. 27: 288-299. DOI: 10.1016/J.Ijrmhm.2008.07.011 |
0.362 |
|
2009 |
Ryu T, Sohn HY, Hwang KS, Fang ZZ. Chemical vapor synthesis (CVS) of tungsten nanopowder in a thermal plasma reactor International Journal of Refractory Metals and Hard Materials. 27: 149-154. DOI: 10.1016/J.Ijrmhm.2008.06.002 |
0.303 |
|
2009 |
Fan P, Fang ZZ. Numerical simulation of kinetics of the cobalt gradient change in WC-Co during liquid phase sintering International Journal of Refractory Metals and Hard Materials. 27: 37-42. DOI: 10.1016/J.Ijrmhm.2008.02.002 |
0.433 |
|
2009 |
Choi YJ, Choi JW, Sohn HY, Ryu T, Hwang KS, Fang ZZ. Chemical vapor synthesis of Mg-Ti nanopowder mixture as a hydrogen storage material International Journal of Hydrogen Energy. 34: 7700-7706. DOI: 10.1016/J.Ijhydene.2009.07.033 |
0.382 |
|
2009 |
Fan P, Guo J, Fang ZZ, Prichard P. Effects of liquid-phase composition on its migration during liquid-phase sintering of cemented carbide Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 1995-2006. DOI: 10.1007/S11661-009-9887-0 |
0.417 |
|
2009 |
Wang X, Fang ZZ. Sintering and propertie of ultrafine binderless WC Advances in Powder Metallurgy and Particulate Materials - 2009, Proceedings of the 2009 International Conference On Powder Metallurgy and Particulate Materials, Powdermet 2009. 86-811. |
0.3 |
|
2008 |
Ryu T, Sohn HY, Hwang KS, Fang ZZ, Kim YU. Plasma synthesis of tungsten carbide nanopowder from tungsten hexachloride High Temperature Materials and Processes. 27: 91-96. DOI: 10.1515/Htmp.2008.27.2.91 |
0.39 |
|
2008 |
Fang ZZ, Wang H. Densification and grain growth during sintering of nanosized particles International Materials Reviews. 53: 326-352. DOI: 10.1179/174328008X353538 |
0.355 |
|
2008 |
Ryu T, Sohn HY, Hwang KS, Fang ZZ. Chemical vapor synthesis and characterization of nanosized WC-Co composite powder and post-treatment Industrial and Engineering Chemistry Research. 47: 9384-9388. DOI: 10.1021/Ie800322Y |
0.439 |
|
2008 |
Fan P, Riddle E, Fang ZZ, Sohn HY. Iron aluminide coatings by an in-situ reaction process Surface and Coatings Technology. 202: 6090-6094. DOI: 10.1016/J.Surfcoat.2008.07.007 |
0.318 |
|
2008 |
LU J, FANG Z, CHOI Y, SOHN H, KIM C, BOWMANJR R, HWANG S. The effect of heating rate on the reversible hydrogen storage based on reactions of Li3AlH6 with LiNH2 Journal of Power Sources. 185: 1354-1358. DOI: 10.1016/J.Jpowsour.2008.07.040 |
0.335 |
|
2008 |
Choi YJ, Lu J, Sohn HY, Fang ZZ. Hydrogen storage properties of the Mg-Ti-H system prepared by high-energy-high-pressure reactive milling Journal of Power Sources. 180: 491-497. DOI: 10.1016/J.Jpowsour.2008.02.038 |
0.376 |
|
2008 |
Wang X, Fang ZZ, Sohn HY. Grain growth during the early stage of sintering of nanosized WC-Co powder International Journal of Refractory Metals and Hard Materials. 26: 232-241. DOI: 10.1016/J.Ijrmhm.2007.04.006 |
0.324 |
|
2008 |
Fan P, Eso OO, Fang ZZ, Sohn HY. Effect of WC particle size on Co distribution in liquid-phase-sintered functionally graded WC-Co composite International Journal of Refractory Metals and Hard Materials. 26: 98-105. DOI: 10.1016/J.Ijrmhm.2007.02.003 |
0.782 |
|
2008 |
Zhang H, Fang ZZ. Characterization of quasi-plastic deformation of WC-Co composite using Hertzian indentation technique International Journal of Refractory Metals and Hard Materials. 26: 106-114. DOI: 10.1016/J.Ijrmhm.2007.02.002 |
0.302 |
|
2008 |
Fang Z, Wang P, Rufford T, Kang X, Lu G, Cheng H. Kinetic- and thermodynamic-based improvements of lithium borohydride incorporated into activated carbon Acta Materialia. 56: 6257-6263. DOI: 10.1016/J.Actamat.2008.08.033 |
0.337 |
|
2008 |
Ryu T, Sohn H, Han G, Kim Y, Hwang KS, Mena M, Fang ZZ. Nanograined WC-Co Composite Powders by Chemical Vapor Synthesis Metallurgical and Materials Transactions B. 39: 1-6. DOI: 10.1007/S11663-007-9115-5 |
0.412 |
|
2008 |
Ryu T, Sohn HY, Hwang KS, Fang ZZ. Tungsten carbide nanopowder by plasma-assisted chemical vapor synthesis from WCl6-CH4-H2 mixtures Journal of Materials Science. 43: 5185-5192. DOI: 10.1007/S10853-008-2741-8 |
0.375 |
|
2008 |
Fan P, Guo J, Fang ZZ, Prichard P. Carbon-induced cobalt gradient in liquid-phase-sintered WC-CO Proceedings of the 7th International Conference On Tungsten, Refractory and Hardmaterials. 314-321. |
0.304 |
|
2007 |
Lu J, Fang ZZ, Choi YJ, Sohn HY. The Potential of Binary Lithium Magnesium Nitride - LiMgN for Hydrogen Storage Application Mrs Proceedings. 1042. DOI: 10.1557/Proc-1042-S05-03 |
0.341 |
|
2007 |
Lu J, Fang ZZ, Sohn HY, Bowman, RC, Hwang S. Potential and Reaction Mechanism of Li−Mg−Al−N−H System for Reversible Hydrogen Storage The Journal of Physical Chemistry C. 111: 16686-16692. DOI: 10.1021/Jp074814E |
0.333 |
|
2007 |
Lu J, Fang ZZ, Choi YJ, Sohn HY. Potential of binary lithium magnesium nitride for hydrogen storage applications Journal of Physical Chemistry C. 111: 12129-12134. DOI: 10.1021/Jp0733724 |
0.344 |
|
2007 |
Lu J, Fang ZZ, Sohn HY. A hybrid method for hydrogen storage and generation from water Journal of Power Sources. 172: 853-858. DOI: 10.1016/J.Jpowsour.2007.05.021 |
0.34 |
|
2007 |
Eso OO, Fan P, Fang ZZ. A kinetic model for cobalt gradient formation during liquid phase sintering of functionally graded WC-Co Advances in Powder Metallurgy and Particulate Materials - 2007, Proceedings of the 2007 International Conference On Powder Metallurgy and Particulate Materials, Powdermet 2007. 890-8103. DOI: 10.1016/J.Ijrmhm.2007.02.004 |
0.798 |
|
2007 |
Fan P, Fang ZZ, Sohn HY. Mathematical modeling of liquid phase migration in solid-liquid mixtures: Application to the sintering of functionally graded WC-Co composites Acta Materialia. 55: 3111-3119. DOI: 10.1016/J.Actamat.2007.01.015 |
0.402 |
|
2007 |
Sohn HY, Ryu T, Choi JW, Hwang KS, Han G, Choi YJ, Fang ZZ. The chemical vapor synthesis of inorganic nanopowders Jom. 59: 44-49. DOI: 10.1007/S11837-007-0151-Z |
0.416 |
|
2007 |
Zhang H, Fang ZZ, Belnap JD. Quasi-plastic deformation of WC-Co composites loaded with a spherical indenter Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 552-561. DOI: 10.1007/S11661-006-9036-Y |
0.325 |
|
2007 |
Eso O, Fang ZZ, Griffo A. Kinetics of cobalt gradient formation during liquid-phase sintering of functionally graded WC-Co International Journal of Powder Metallurgy (Princeton, New Jersey). 43: 57-63. |
0.8 |
|
2007 |
Ryu T, Mena M, Sohn HY, Han G, Fang ZZ. Nano-grained WC-Co composite powders by the chemical vapor synthesis Tms Annual Meeting. 73-82. |
0.322 |
|
2007 |
Choi JW, Sohn HY, Choi YJ, Lu J, Han G, Fang ZZ. Aluminum nanopowder as a precursor of hydrogen storage materials Tms Annual Meeting. 1-8. |
0.313 |
|
2006 |
Lu J, Fang ZZ, Sohn HY. A dehydrogenation mechanism of metal hydrides based on interactions between Hdelta+ and H-. Inorganic Chemistry. 45: 8749-54. PMID 17029387 DOI: 10.1021/Ic060836O |
0.386 |
|
2006 |
Lu J, Fang ZZ, Sohn HY. A new Li-Al-N-H system for reversible hydrogen storage. The Journal of Physical Chemistry. B. 110: 14236-9. PMID 16854126 DOI: 10.1021/Jp061764P |
0.401 |
|
2006 |
Lu J, Fang ZZ. Synthesis and characterization of nanoscaled cerium (IV) oxide via a solid-state mechanochemical method Journal of the American Ceramic Society. 89: 842-847. DOI: 10.1111/J.1551-2916.2005.00829.X |
0.341 |
|
2006 |
Eso O, Fang ZZ, Griffo A. Kinetics of cobalt gradient formation during the liquid phase sintering of functionally graded WC-Co Advances in Powder Metallurgy and Particulate Materials - 2006, Proceedings of the 2006 International Conference On Powder Metallurgy and Particulate Materials, Powdermet 2006. 822-833. DOI: 10.1016/J.Ijrmhm.2006.07.002 |
0.798 |
|
2006 |
Kumar V, Fang ZZ, Wright SI, Nowell MM. An analysis of grain boundaries and grain growth in cemented tungsten carbide using orientation imaging microscopy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 599-607. DOI: 10.1007/S11661-006-0032-Z |
0.479 |
|
2006 |
Kumar V, Fang ZZ, Liang J, Dariavach N. Microstructural analysis of lead-free solder alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2505-2514. DOI: 10.1007/Bf02586223 |
0.546 |
|
2006 |
Fan P, Eso OO, Fang ZZ, Sohn HY. Liquid phase migration during the sintering of functionally graded WC-Co 2006 Tms Fall Extraction and Processing Division: Sohn International Symposium. 3: 111-119. |
0.785 |
|
2006 |
Mena M, Ryu T, Sohn HY, Han G, Kim YU, Fang ZZ. Chemical vapor synthesis of WC-Co nanocomposite powders 2006 Tms Fall Extraction and Processing Division: Sohn International Symposium. 3: 195-202. |
0.304 |
|
2005 |
Lu J, Fang ZZ. Dehydrogenation of a combined LiAlH4/LiNH2 system. The Journal of Physical Chemistry. B. 109: 20830-4. PMID 16853700 DOI: 10.1021/Jp053954Q |
0.421 |
|
2005 |
Fang ZZ, Eso OO. Liquid phase sintering of functionally graded WC-Co composites Scripta Materialia. 52: 785-791. DOI: 10.1016/J.Ijrmhm.2005.04.017 |
0.792 |
|
2005 |
Fang Z, Maheshwari P, Wang X, Sohn H, Griffo A, Riley R. An experimental study of the sintering of nanocrystalline WC–Co powders International Journal of Refractory Metals and Hard Materials. 23: 249-257. DOI: 10.1016/J.Ijrmhm.2005.04.014 |
0.352 |
|
2005 |
Fang ZZ. Correlation of transverse rupture strength of WC-Co with hardness International Journal of Refractory Metals and Hard Materials. 23: 119-127. DOI: 10.1016/J.Ijrmhm.2004.11.005 |
0.384 |
|
2004 |
Liu J, Fang ZZ. Quantitative characterization of microstructures of liquid-phase-sintered two-phase materials Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 1881-1888. DOI: 10.1007/S11661-004-0096-6 |
0.387 |
|
2002 |
Deng X, Patterson BR, Chawla KK, Koopman MC, Mackin C, Fang Z, Lockwood G, Griffo A. Microstructure/hardness relationship in a dual composite Journal of Materials Science Letters. 21: 707-709. DOI: 10.1023/A:1015733005094 |
0.361 |
|
2001 |
Deng X, Patterson BR, Chawla KK, Koopman MC, Fang Z, Lockwood G, Griffo A. Mechanical properties of a hybrid cemented carbide composite International Journal of Refractory Metals and Hard Materials. 19: 547-552. DOI: 10.1016/S0263-4368(01)00060-9 |
0.318 |
|
Show low-probability matches. |