Year |
Citation |
Score |
2019 |
Li C, Denlinger ER, Gouge MF, Irwin JE, Michaleris P. Numerical verification of an octree mesh coarsening strategy for simulating additive manufacturing processes Additive Manufacturing. 30: 100903. DOI: 10.1016/J.Addma.2019.100903 |
0.484 |
|
2019 |
Gouge M, Denlinger E, Irwin J, Li C, Michaleris P. Experimental Validation of Thermo-mechanical Part-Scale Modeling for Laser Powder Bed Fusion Processes Additive Manufacturing. 29: 100771. DOI: 10.1016/J.Addma.2019.06.022 |
0.433 |
|
2019 |
Li C, Gouge MF, Denlinger ER, Irwin JE, Michaleris P. Estimation of part-to-powder heat losses as surface convection in laser powder bed fusion Additive Manufacturing. 26: 258-269. DOI: 10.1016/J.Addma.2019.02.006 |
0.501 |
|
2017 |
Gouge MF, Michaleris P, Palmer TA. Fixturing effects in the thermal modeling of laser cladding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 139. DOI: 10.1115/1.4034136 |
0.416 |
|
2017 |
Denlinger ER, Gouge M, Irwin J, Michaleris P. Thermomechanical model development and in situ experimental validation of the Laser Powder-Bed Fusion process Additive Manufacturing. 16: 73-80. DOI: 10.1016/J.Addma.2017.05.001 |
0.476 |
|
2017 |
Dunbar AJ, Denlinger ER, Gouge MF, Simpson TW, Michaleris P. Comparisons of laser powder bed fusion additive manufacturing builds through experimental in situ distortion and temperature measurements Additive Manufacturing. 15: 57-65. DOI: 10.1016/J.Addma.2017.03.003 |
0.35 |
|
2016 |
Irwin J, Michaleris P. A Line Heat Input Model for Additive Manufacturing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033662 |
0.322 |
|
2016 |
Irwin J, Reutzel EW, Michaleris P, Keist J, Nassar AR. Predicting Microstructure from Thermal History during Additive Manufacturing for Ti-6Al-4V Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033525 |
0.649 |
|
2016 |
Heigel JC, Gouge MF, Michaleris P, Palmer TA. Selection of powder or wire feedstock material for the laser cladding of Inconel® 625 Journal of Materials Processing Technology. 231: 357-365. DOI: 10.1016/J.Jmatprotec.2016.01.004 |
0.435 |
|
2016 |
Dunbar AJ, Denlinger ER, Gouge MF, Michaleris P. Experimental validation of finite element modeling for laser powder bed fusion deformation Additive Manufacturing. 12: 108-120. DOI: 10.1016/J.Addma.2016.08.003 |
0.447 |
|
2016 |
Denlinger ER, Michaleris P. Effect of stress relaxation on distortion in additive manufacturing process modeling Additive Manufacturing. 12: 51-59. DOI: 10.1016/J.Addma.2016.06.011 |
0.436 |
|
2016 |
Dunbar AJ, Denlinger ER, Heigel J, Michaleris P, Guerrier P, Martukanitz R, Simpson TW. Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process Additive Manufacturing. 12: 25-30. DOI: 10.1016/J.Addma.2016.04.007 |
0.423 |
|
2016 |
Denlinger ER, Jagdale V, Srinivasan GV, El-Wardany T, Michaleris P. Thermal modeling of Inconel 718 processed with powder bed fusion and experimental validation using in situ measurements Additive Manufacturing. 11: 7-15. DOI: 10.1016/J.Addma.2016.03.003 |
0.467 |
|
2016 |
Denlinger ER, Michaleris P. Thermomechanical modeling and in situ experimental validation of the laser powder-bed fusion process International Sampe Technical Conference. 2016. |
0.381 |
|
2015 |
Heigel JC, Michaleris P. The impact of argon shielding flow rate on laser engineered net shaping (LENS) of TI-6AL-4V Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 1. DOI: 10.1115/MSEC20159244 |
0.342 |
|
2015 |
Kriczky DA, Irwin J, Reutzel EW, Michaleris P, Nassar AR, Craig J. 3D spatial reconstruction of thermal characteristics in directed energy deposition through optical thermal imaging Journal of Materials Processing Technology. 221: 172-186. DOI: 10.1016/J.Jmatprotec.2015.02.021 |
0.649 |
|
2015 |
Heigel JC, Michaleris P, Palmer TA. In situ monitoring and characterization of distortion during laser cladding of Inconel® 625 Journal of Materials Processing Technology. 220: 135-145. DOI: 10.1016/J.Jmatprotec.2014.12.029 |
0.388 |
|
2015 |
Denlinger ER, Heigel JC, Michaleris P, Palmer TA. Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys Journal of Materials Processing Technology. 215: 123-131. DOI: 10.1016/J.Jmatprotec.2014.07.030 |
0.394 |
|
2015 |
Heigel JC, Michaleris P, Reutzel EW. Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti-6Al-4V Additive Manufacturing. 5: 9-19. DOI: 10.1016/J.Addma.2014.10.003 |
0.658 |
|
2015 |
Gouge MF, Heigel JC, Michaleris P, Palmer TA. Modeling forced convection in the thermal simulation of laser cladding processes International Journal of Advanced Manufacturing Technology. 79: 307-320. DOI: 10.1007/S00170-015-6831-X |
0.363 |
|
2014 |
Denlinger ER, Irwin J, Michaleris P. Thermomechanical modeling of additive manufacturing large parts Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4028669 |
0.407 |
|
2014 |
Witherell P, Feng S, Simpson TW, Saint John DB, Michaleris P, Liu ZK, Chen LQ, Martukanitz R. Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4028533 |
0.365 |
|
2014 |
Michaleris P. Modeling metal deposition in heat transfer analyses of additive manufacturing processes Finite Elements in Analysis and Design. 86: 51-60. DOI: 10.1016/J.Finel.2014.04.003 |
0.408 |
|
2014 |
Martukanitz R, Michaleris P, Palmer T, DebRoy T, Liu ZK, Otis R, Heo TW, Chen LQ. Toward an integrated computational system for describing the additive manufacturing process for metallic materials Additive Manufacturing. 1: 52-63. DOI: 10.1016/J.Addma.2014.09.002 |
0.404 |
|
2011 |
Michaleris P. Uncertainty quantification in modeling welding residual stress and distortion Science and Technology of Welding and Joining. 16: 722-727. DOI: 10.1179/1362171811Y.0000000073 |
0.326 |
|
2011 |
Michaleris P. Modelling welding residual stress and distortion: Current and future research trends Science and Technology of Welding and Joining. 16: 363-368. DOI: 10.1179/1362171811Y.0000000017 |
0.315 |
|
2011 |
Lawrence AR, Michaleris P. Effects of thermal transport in computation of welding residual stress and distortion Science and Technology of Welding and Joining. 16: 215-220. DOI: 10.1179/1362171810Y.0000000027 |
0.366 |
|
2011 |
Michaleris P. Minimization of Welding Distortion and Buckling: Modelling and Implementation Minimization of Welding Distortion and Buckling: Modelling and Implementation. 1-298. |
0.366 |
|
2009 |
Lawrence A, Michaleris P. Evaluation of transport modeling in the prediction of welding residual stresses and distortion Asm Proceedings of the International Conference: Trends in Welding Research. 792-798. DOI: 10.1361/cp2008twr792 |
0.346 |
|
2009 |
Qin X, Michaleris P. Coupled themo-elasto-viscoplastic modeling of Friction Stir Welding in Eulerian frame Asm Proceedings of the International Conference: Trends in Welding Research. 742-750. DOI: 10.1361/cp2008twr742 |
0.346 |
|
2009 |
Qin XL, Michaleris P. Elasto-visco-plastic analysis of welding residual stress Science and Technology of Welding and Joining. 14: 606-615. DOI: 10.1179/136217109X456988 |
0.371 |
|
2009 |
Qin X, Michaleris P. Themo-elasto-viscoplastic modelling of friction stir welding Science and Technology of Welding and Joining. 14: 640-649. DOI: 10.1179/136217109X12464549883457 |
0.353 |
|
2009 |
Qin X, Michaleris P. Eulerian elasto-visco-plastic formulations for residual stress prediction International Journal For Numerical Methods in Engineering. 77: 634-663. DOI: 10.1002/Nme.2429 |
0.579 |
|
2007 |
Zhang L, Michaleris P, Marugabandhu P. Evaluation of applied plastic strain methods for welding distortion prediction Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 1000-1010. DOI: 10.1115/1.2716740 |
0.405 |
|
2006 |
Reutzel EW, Zhang L, Michaleris P. A differential geometry approach to analysis of thermal forming International Journal of Mechanical Sciences. 48: 1046-1062. DOI: 10.1016/J.Ijmecsci.2006.05.012 |
0.664 |
|
2006 |
Kelly SM, Martukanitz RP, Michaleris P, Bugarewicz M, Huang TD, Kvidahl L. Low heat input welding for thin steel fabrication Journal of Ship Production. 22: 105-109. |
0.384 |
|
2005 |
Zhang L, Michaleris P, Sun J, Marugabandhu P. Evaluation of a decoupled plastic strain method for welding distortion prediction Asm Proceedings of the International Conference: Trends in Welding Research. 2005: 541-546. |
0.322 |
|
2005 |
Bugarewicz MM, Kelly SM, Michaleris P, Reutzel EW, Martukanitz RP. Laser-gma hybrid welding: Distortion analysis and design optimization modelling techniques 24th International Congress On Applications of Lasers and Electro-Optics, Icaleo 2005 - Congress Proceedings. 535-542. |
0.66 |
|
2005 |
Reutzel EW, Kelly SM, Martukanitz RP, Bugarewicz MM, Michaleris P. Laser-GMA hybrid welding: Process monitoring and thermal modeling Asm Proceedings of the International Conference: Trends in Welding Research. 2005: 143-148. |
0.683 |
|
2005 |
Tsau SH, Michaleris P. AH-adaptive FE scheme for welding distortion analysis in large structures Asm Proceedings of the International Conference: Trends in Welding Research. 2005: 607-616. |
0.692 |
|
2004 |
Zhang L, Michaleris P. Investigation of Lagrangian and Eulerian finite element methods for modeling the laser forming process Finite Elements in Analysis and Design. 40: 383-405. DOI: 10.1016/S0168-874X(03)00069-6 |
0.408 |
|
2004 |
Zhang L, Reutzel EW, Michaleris P. Finite element modeling discretization requirements for the laser forming process International Journal of Mechanical Sciences. 46: 623-637. DOI: 10.1016/J.Ijmecsci.2004.04.001 |
0.671 |
|
2004 |
Song J, Shanghvi JY, Michaleris P. Sensitivity analysis and optimization of thermo-elasto-plastic processes with applications to welding side heater design Computer Methods in Applied Mechanics and Engineering. 193: 4541-4566. DOI: 10.1016/j.cma.2004.03.007 |
0.335 |
|
2003 |
Deo MV, Michaleris P, Sun J. Prediction of buckling distortion of welded structures Science and Technology of Welding and Joining. 8: 55-61. DOI: 10.1179/13621710322500900 |
0.326 |
|
2003 |
Deo MV, Michaleris P. Mitigation of welding induced buckling distortion using transient thermal tensioning Science and Technology of Welding and Joining. 8: 49-54. DOI: 10.1179/136217103225008919 |
0.342 |
|
2003 |
Song J, Peters J, Noor A, Michaleris P. Sensitivity analysis of the thermomechanical response of welded joints International Journal of Solids and Structures. 40: 4167-4180. DOI: 10.1016/S0020-7683(03)00223-3 |
0.369 |
|
2003 |
Reutzel E, Gombotz K, Martukanitz R, Michaleris P. Path planning strategies for laser line forming Icaleo 2003 - 22nd International Congress On Applications of Laser and Electro-Optics, Congress Proceedings. |
0.341 |
|
2003 |
Michaleris P, Song J. Sensitivity analysis and optimisation of thermo-elasto-plastic process with applications to welding side heater design Computational Engineering. 4: 33-42. |
0.328 |
|
2003 |
Deo MV, Michaleris P. Elimination of bowing distortion in welded stiffeners Journal of Ship Production. 19: 76-83. |
0.326 |
|
2002 |
Shanghvi JY, Michaleris P. Thermo-elasto-plastic finite element analysis of quasi-state processes in Eulerian reference frames International Journal For Numerical Methods in Engineering. 53: 1533-1556. DOI: 10.1002/Nme.345 |
0.367 |
|
2002 |
Reutzel EW, Aburdene JU, Gombotz KJ, Magnusen JP, Martukanitz RP, Michaleris P, Zhang L. Continuing development of a laser line forming system Icaleo 2002 - 21st International Congress On Applications of Laser and Electro-Optics, Congress Proceedings. |
0.664 |
|
2002 |
Deo MV, Michaleris P. Elimination of welding induced Buckling Distortion Asm Proceedings of the International Conference: Trends in Welding Research. 838-843. |
0.346 |
|
2002 |
Deo MV, Michaleris P. Experimental verification of distortion analysis of welded stiffeners Journal of Ship Production. 18: 216-225. |
0.31 |
|
2001 |
Vanli OA, Michaleris P. Distortion Analysis of Welded Stiffeners Journal of Ship Production. 17: 226-240. |
0.321 |
|
2000 |
Rajadhyaksha SM, Michaleris P. Optimization of thermal processes using an Eulerian formulation and application in laser surface hardening International Journal For Numerical Methods in Engineering. 47: 1807-1823. DOI: 10.1002/(Sici)1097-0207(20000420)47:11<1807::Aid-Nme819>3.0.Co;2-D |
0.36 |
|
1999 |
Michaleris P, Dantzig J, Tortorelli D. Minimization of welding residual stress and distortion in large structures Welding Journal (Miami, Fla). 78: 361-s. |
0.339 |
|
1998 |
Michaleris P, Dantzig J, Tortorelli D. Optimization of the Thermal Tensioning Process for Minimum Residual Stress and Distortion Asm Proceedings of the International Conference: Trends in Welding Research. 988-992. |
0.369 |
|
1997 |
Michaleris P, Debiccari A. Prediction of welding distortion Welding Journal (Miami, Fla). 76: 172-s. |
0.308 |
|
1996 |
Michaleris P, DeBiccari A. A predictive technique for buckling analysis of thin section panels due to welding Journal of Ship Production. 12: 269-275. |
0.304 |
|
1996 |
Michaleris P, Sun X. Finite element analysis of thermal tensioning techniques mitigating weld buckling distortion American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 327: 77-87. |
0.386 |
|
1996 |
Michaleris P. Residual stress distributions for multi-pass welds in pressure vessel and piping components American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 327: 17-20. |
0.315 |
|
Show low-probability matches. |