☰

Enrique J. Lavernia - Publications

Affiliations: 
Materials Science and Engineering University of California, Davis, Davis, CA 
Area:
Materials Science Engineering, Inorganic Chemistry
Tree Info Similar researchers PubMed Report error

500 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2021 Zhao Y, Liu J, Topping TD, Lavernia EJ. Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation Journal of Alloys and Compounds. 851: 156931. DOI: 10.1016/J.Jallcom.2020.156931  0.52
2020 Sun H, Ding Z, Li S, Zhang X, Lavernia EJ, Liu W. Zigzag Dissociation Mode of 〈c + a〉 Dislocations on the 101¯1 Plane in Magnesium Alloys Advances in Materials Science and Engineering. 2020: 1-5. DOI: 10.1155/2020/9646084  0.349
2020 Zhang C, MacDonald BE, Guo F, Wang H, Zhu C, Liu X, Kang Y, Xie X, Zhou Y, Vecchio KS, Lavernia EJ. Cold-workable refractory complex concentrated alloys with tunable microstructure and good room-temperature tensile behavior Scripta Materialia. 188: 16-20. DOI: 10.1016/J.Scriptamat.2020.07.006  0.482
2020 Wang X, Jiang L, Zhang D, Rupert TJ, Beyerlein IJ, Mahajan S, Lavernia EJ, Schoenung JM. Revealing the deformation mechanisms for room-temperature compressive superplasticity in nanocrystalline magnesium Materialia. 11: 100731. DOI: 10.1016/J.Mtla.2020.100731  0.458
2020 Zhao YH, Bingert JF, Topping TD, Sun PL, Liao XZ, Zhu YT, Lavernia EJ. Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138706. DOI: 10.1016/J.Msea.2019.138706  0.538
2020 Svetlizky D, Zheng B, Buta T, Zhou Y, Golan O, Breiman U, Haj-Ali R, Schoenung JM, Lavernia EJ, Eliaz N. Directed energy deposition of Al 5xxx alloy using Laser Engineered Net Shaping (LENS®) Materials & Design. 192: 108763. DOI: 10.1016/J.Matdes.2020.108763  0.656
2020 Liu S, Guo Y, Pan Z, Liao X, Lavernia E, Zhu Y, Wei Q, Zhao Y. Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal Journal of Materials Science & Technology. 54: 31-39. DOI: 10.1016/J.Jmst.2020.03.042  0.421
2020 Sun H, Ding Z, Sun H, Li S, Lavernia EJ, Liu W. The synergistic effects of energy barriers and shear directions on twinning in face centered cubic metals Computational Materials Science. 177: 109547. DOI: 10.1016/J.Commatsci.2020.109547  0.415
2020 Zhang C, Zhu C, Cao P, Wang X, Ye F, Kaufmann K, Casalena L, MacDonald BE, Pan X, Vecchio K, Lavernia EJ. Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy Acta Materialia. 199: 602-612. DOI: 10.1016/J.Actamat.2020.08.043  0.512
2020 Wang X, Jiang L, Cooper C, Yu K, Zhang D, Rupert TJ, Mahajan S, Beyerlein IJ, Lavernia EJ, Schoenung JM. Toughening magnesium with gradient twin meshes Acta Materialia. 195: 468-481. DOI: 10.1016/J.Actamat.2020.05.021  0.436
2019 Ding Z, Zhao G, Sun H, Li S, Ma F, Lavernia EJ, Zhu YT, Liu W. Alloying effects on the plasticity of magnesium: Comprehensive analysis of influences of all five slip systems. Journal of Physics. Condensed Matter : An Institute of Physics Journal. PMID 31519010 DOI: 10.1088/1361-648X/Ab445D  0.377
2019 Lin TC, Cao C, Sokoluk M, Jiang L, Wang X, Schoenung JM, Lavernia EJ, Li X. Aluminum with dispersed nanoparticles by laser additive manufacturing. Nature Communications. 10: 4124. PMID 31511518 DOI: 10.1038/S41467-019-12047-2  0.361
2019 Cao C, Yao G, Jiang L, Sokoluk M, Wang X, Ciston J, Javadi A, Guan Z, De Rosa I, Xie W, Lavernia EJ, Schoenung JM, Li X. Bulk ultrafine grained/nanocrystalline metals via slow cooling. Science Advances. 5: eaaw2398. PMID 31467973 DOI: 10.1126/Sciadv.Aaw2398  0.432
2019 Derimow NA, Santodonato LJ, MacDonald BE, Le B, Lavernia EJ, Abbaschian R. In-Situ Imaging of Molten High-Entropy Alloys Using Cold Neutrons Journal of Imaging. 5: 29. DOI: 10.3390/Jimaging5020029  0.406
2019 Zhang D, Jiang L, Wang X, Beyerlein IJ, Minor AM, Schoenung JM, Mahajan S, Lavernia EJ. Revealing deformation mechanisms in Mg–Y alloy by in situ deformation of nano-pillars with mediated lateral stiffness Journal of Materials Research. 34: 1542-1554. DOI: 10.1557/Jmr.2019.124  0.445
2019 Monson TC, Lavernia EJ, Zheng B, Delany RE, Pearce CJ, Langlois ED, Lepkowski SM, Stevens TE, Zhou Y, Atcitty S. Soft Magnetic Multilayered FeSiCrB–Fe$_{x}$N Metallic Glass Composites Fabricated by Spark Plasma Sintering Ieee Magnetics Letters. 10: 1-5. DOI: 10.1109/Lmag.2019.2906832  0.553
2019 Li GJ, Guo MX, Du JQ, Zhang JS, Zhuang LZ, Lavernia EJ. Influence of precipitate-assisted nucleation on the microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys Philosophical Magazine. 99: 1335-1361. DOI: 10.1080/14786435.2019.1580400  0.453
2019 Guo MX, Zhang YD, Yuan B, Sha G, Zhang JS, Zhuang LZ, Lavernia EJ. Influence of aging pathways on the evolution of heterogeneous solute-rich features in peak-aged Al-Mg-Si-Cu alloy with a high Mg/Si ratio Philosophical Magazine Letters. 99: 49-56. DOI: 10.1080/09500839.2019.1615148  0.351
2019 Guo MX, Li GJ, Zhang YD, Sha G, Zhang JS, Zhuang LZ, Lavernia EJ. Influence of Zn on the distribution and composition of heterogeneous solute-rich features in peak aged Al-Mg-Si-Cu alloys Scripta Materialia. 159: 5-8. DOI: 10.1016/J.Scriptamat.2018.09.004  0.433
2019 Sun H, Ding Z, Zhang D, Zhou H, Li S, Lavernia EJ, Zhu Y, Liu W. Predicting the formation of dislocations in magnesium alloys from multiple stacking fault energies Materialia. 7: 100352. DOI: 10.1016/J.Mtla.2019.100352  0.437
2019 Li XX, Yang C, Chen T, Fu ZQ, Li YY, Ivasishin OM, Lavernia EJ. Effective atomic diffusion coefficient dependence on applied pressure during spark plasma sintering Materialia. 6: 100334. DOI: 10.1016/J.Mtla.2019.100334  0.327
2019 Derimow N, MacDonald BE, Lavernia EJ, Abbaschian R. Duplex phase hexagonal-cubic multi-principal element alloys with high hardness Materials Today Communications. 21: 100658. DOI: 10.1016/J.Mtcomm.2019.100658  0.411
2019 Zheng B, Haley J, Yang N, Yee J, Terrassa K, Zhou Y, Lavernia E, Schoenung J. On the evolution of microstructure and defect control in 316L SS components fabricated via directed energy deposition Materials Science and Engineering: A. 764: 138243. DOI: 10.1016/J.Msea.2019.138243  0.606
2019 Zhang C, Chen F, Huang Z, Jia M, Chen G, Ye Y, Lin Y, Liu W, Chen B, Shen Q, Zhang L, Lavernia EJ. Additive manufacturing of functionally graded materials: A review Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 764: 138209. DOI: 10.1016/J.Msea.2019.138209  0.365
2019 Haley JC, Schoenung JM, Lavernia EJ. Modelling particle impact on the melt pool and wettability effects in laser directed energy deposition additive manufacturing Materials Science and Engineering: A. 761: 138052. DOI: 10.1016/J.Msea.2019.138052  0.365
2019 Du D, Dong A, Shu D, Zhu G, Sun B, Li X, Lavernia E. Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 760: 469-480. DOI: 10.1016/J.Msea.2019.05.013  0.407
2019 Jiang L, Kumar MA, Beyerlein IJ, Wang X, Zhang D, Wu C, Cooper C, Rupert TJ, Mahajan S, Lavernia EJ, Schoenung JM. Twin formation from a twin boundary in Mg during in-situ nanomechanical testing Materials Science and Engineering: A. 759: 142-153. DOI: 10.1016/J.Msea.2019.04.117  0.341
2019 Du D, Haley JC, Dong A, Fautrelle Y, Shu D, Zhu G, Li X, Sun B, Lavernia EJ. Influence of static magnetic field on microstructure and mechanical behavior of selective laser melted AlSi10Mg alloy Materials & Design. 181: 107923. DOI: 10.1016/J.Matdes.2019.107923  0.391
2019 Haley JC, Zheng B, Bertoli US, Dupuy AD, Schoenung JM, Lavernia EJ. Working distance passive stability in laser directed energy deposition additive manufacturing Materials & Design. 161: 86-94. DOI: 10.1016/J.Matdes.2018.11.021  0.551
2019 Yuan B, Guo M, Wu Y, Zhang J, Zhuang L, Lavernia EJ. Influence of treatment pathways on the precipitation behaviors of Al-Mg-Si-Cu-(Zn)-Mn alloys Journal of Alloys and Compounds. 797: 26-38. DOI: 10.1016/J.Jallcom.2019.05.055  0.422
2019 Dai C, Cote D, Schade C, Lavernia E, Apelian D. Oxidation behavior of Fe-Cr-(Si)-Y Journal of Alloys and Compounds. 784: 1344-1353. DOI: 10.1016/J.Jallcom.2018.12.225  0.391
2019 Guo MX, Zhang YD, Li GJ, Jin SB, Sha G, Zhang JS, Zhuang LZ, Lavernia EJ. Solute clustering in Al-Mg-Si-Cu-(Zn) alloys during aging Journal of Alloys and Compounds. 774: 347-363. DOI: 10.1016/J.Jallcom.2018.09.309  0.382
2019 Balog M, Krizik P, Bajana O, Hu T, Yang H, Schoenung JM, Lavernia EJ. Influence of grain boundaries with dispersed nanoscale Al2O3 particles on the strength of Al for a wide range of homologous temperatures Journal of Alloys and Compounds. 772: 472-481. DOI: 10.1016/J.Jallcom.2018.09.164  0.471
2019 Munitz A, Edry I, Brosh E, Derimow N, MacDonald BE, Lavernia EJ, Abbaschian R. Liquid phase separation in AlCrFeNiMo0.3 high-entropy alloy Intermetallics. 112: 106517. DOI: 10.1016/J.Intermet.2019.106517  0.416
2019 Fu Z, MacDonald BE, Dupuy AD, Wang X, Monson TC, Delaney RE, Pearce CJ, Hu K, Jiang Z, Zhou Y, Schoenung JM, Chen W, Lavernia EJ. Exceptional combination of soft magnetic and mechanical properties in a heterostructured high-entropy composite Applied Materials Today. 15: 590-598. DOI: 10.1016/J.Apmt.2019.04.014  0.397
2019 MacDonald BE, Fu Z, Wang X, Li Z, Chen W, Zhou Y, Raabe D, Schoenung J, Hahn H, Lavernia EJ. Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy Acta Materialia. 181: 25-35. DOI: 10.1016/J.Actamat.2019.09.030  0.405
2019 Fu Z, Hoffman A, MacDonald BE, Jiang Z, Chen W, Arivu M, Wen H, Lavernia EJ. Atom probe tomography study of an Fe25Ni25Co25Ti15Al10 high-entropy alloy fabricated by powder metallurgy Acta Materialia. 179: 372-382. DOI: 10.1016/J.Actamat.2019.08.047  0.45
2019 Zou L, Chen F, Wang H, Shen Q, Lavernia EJ, Zhang L. Influence of Porosity on Mechanical Behavior of Porous Cu Fabricated via De-Alloying of Cu–Fe Alloy Metals and Materials International. 25: 83-93. DOI: 10.1007/S12540-018-0168-6  0.527
2019 Dai C, Kurmanaeva L, Schade C, Lavernia E, Apelian D. Microstructure and Mechanical Behavior of ODS Stainless Steel Fabricated Using Cryomilling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 5767-5781. DOI: 10.1007/S11661-019-05479-4  0.454
2018 Fu Z, Jiang L, Wardini JL, MacDonald BE, Wen H, Xiong W, Zhang D, Zhou Y, Rupert TJ, Chen W, Lavernia EJ. A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength. Science Advances. 4: eaat8712. PMID 30333993 DOI: 10.1126/Sciadv.Aat8712  0.478
2018 Fu Z, MacDonald BE, Monson TC, Zheng B, Chen W, Lavernia EJ. Influence of heat treatment on microstructure, mechanical behavior, and soft magnetic properties in an fcc-based Fe 29 Co 28 Ni 29 Cu 7 Ti 7 high-entropy alloy Journal of Materials Research. 33: 2214-2222. DOI: 10.1557/Jmr.2018.161  0.649
2018 Chen F, Jia M, Huang M, Shen Q, Lavernia EJ, Zhang L. Electronically conductive porous TiN ceramics with enhanced strength by aqueous gel‐casting Journal of the American Ceramic Society. 101: 5309-5314. DOI: 10.1111/Jace.15973  0.312
2018 Fu Z, MacDonald BE, Li Z, Jiang Z, Chen W, Zhou YZ, Lavernia EJ. Engineering heterostructured grains to enhance strength in a single-phase high-entropy alloy with maintained ductility Materials Research Letters. 6: 634-640. DOI: 10.1080/21663831.2018.1526222  0.479
2018 Fu Z, Chen W, Jiang Z, MacDonald BE, Lin Y, Chen F, Zhang L, Lavernia EJ. Influence of Cr removal on the microstructure and mechanical behaviour of a high-entropy Al0.8Ti0.2CoNiFeCr alloy fabricated by powder metallurgy Powder Metallurgy. 61: 106-114. DOI: 10.1080/00325899.2018.1427662  0.502
2018 Li XX, Yang C, Chen T, Fu ZQ, Li YY, Ivasishin OM, Lavernia EJ. Determination of atomic diffusion coefficient via isochronal spark plasma sintering Scripta Materialia. 151: 47-52. DOI: 10.1016/J.Scriptamat.2018.03.033  0.389
2018 Fu Z, MacDonald BE, Zhang D, Wu B, Chen W, Ivanisenko J, Hahn H, Lavernia EJ. Fcc nanostructured TiFeCoNi alloy with multi-scale grains and enhanced plasticity Scripta Materialia. 143: 108-112. DOI: 10.1016/J.Scriptamat.2017.09.023  0.524
2018 Xia T, Xie Y, Yang C, Zeng W, Bi Z, Liang J, Zhu G, Wang J, Zhang D, Lavernia EJ. Strengthening effects and thermal stability of the ultrafine grained microstructure of a nickel base superalloy at room and elevated temperatures Materials Characterization. 145: 362-370. DOI: 10.1016/J.Matchar.2018.08.055  0.51
2018 Xia T, Yang C, Zeng W, Xie Y, Zhang Y, Zhang D, Zhu G, Shu D, Lavernia EJ. Dispersoids and γ′ precipitates in an ultrafine grained René 88DT – 5vol.%Y2O3 alloy with outstanding thermal stability Materials Characterization. 141: 139-147. DOI: 10.1016/J.Matchar.2018.04.027  0.514
2018 Yang Y, Xiong X, Su J, Peng X, Wen H, Wei G, Pan F, Lavernia EJ. Influence of extrusion temperature on microstructure and mechanical behavior of duplex Mg-Li-Al-Sr alloy Journal of Alloys and Compounds. 750: 696-705. DOI: 10.1016/J.Jallcom.2018.03.319  0.508
2018 Zeng W, Xie J, Zhou D, Fu Z, Zhang D, Lavernia EJ. Bulk Cu-NbC nanocomposites with high strength and high electrical conductivity Journal of Alloys and Compounds. 745: 55-62. DOI: 10.1016/J.Jallcom.2018.02.215  0.355
2018 Haley JC, Schoenung JM, Lavernia EJ. Observations of particle-melt pool impact events in directed energy deposition Additive Manufacturing. 22: 368-374. DOI: 10.1016/J.Addma.2018.04.028  0.339
2018 Ding Z, Liu W, Sun H, Li S, Zhang D, Zhao Y, Lavernia EJ, Zhu Y. Origins and dissociation of pyramidal dislocations in magnesium and its alloys Acta Materialia. 146: 265-272. DOI: 10.1016/J.Actamat.2017.12.049  0.408
2018 Wang X, Jiang L, Zhang D, Beyerlein IJ, Mahajan S, Rupert TJ, Lavernia EJ, Schoenung JM. Reversed compressive yield anisotropy in magnesium with microlaminated structure Acta Materialia. 146: 12-24. DOI: 10.1016/J.Actamat.2017.12.025  0.449
2018 Tripathi A, Middleton S, Lavernia EJ, Sachdev AK, Kulkarni KN. Ternary Interdiffusion in β (BCC) Phase of the Ti-Al-Nb System Journal of Phase Equilibria and Diffusion. 39: 841-852. DOI: 10.1007/S11669-018-0680-X  0.383
2018 Dai C, Schade C, Apelian D, Lavernia EJ. Processing Techniques for ODS Stainless Steels Metallurgical and Materials Transactions B. 49: 3043-3055. DOI: 10.1007/S11663-018-1429-Y  0.469
2018 Liang N, Zhao Y, Li Y, Topping T, Zhu Y, Valiev RZ, Lavernia EJ. Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing Journal of Materials Science. 53: 13173-13185. DOI: 10.1007/S10853-018-2548-1  0.737
2017 Wu C, Ma K, Zhang D, Wu J, Xiong S, Luo G, Zhang J, Chen F, Shen Q, Zhang L, Lavernia EJ. Precipitation phenomena in Al-Zn-Mg alloy matrix composites reinforced with B4C particles. Scientific Reports. 7: 9589. PMID 28852113 DOI: 10.1038/S41598-017-10291-4  0.448
2017 Sun Y, Fu L, Fu Z, Shan A, Lavernia EJ. Enhanced thermal stability and ductility in a nanostructured Ni-based alloy Scripta Materialia. 141: 1-5. DOI: 10.1016/J.Scriptamat.2017.07.013  0.488
2017 Yang C, Zhu MD, Luo X, Liu LH, Zhang WW, Long Y, Xiao ZY, Fu ZQ, Zhang L, Lavernia EJ. Influence of powder properties on densification mechanism during spark plasma sintering Scripta Materialia. 139: 96-99. DOI: 10.1016/J.Scriptamat.2017.06.034  0.439
2017 Fiebig J, Jian J, Wang H, McCrea J, Lavernia E, Mukherjee AK. Thermal stability from calorimetric measurements of multilayered NiFe specimens with different layer thickness Scripta Materialia. 137: 100-103. DOI: 10.1016/J.Scriptamat.2017.04.021  0.4
2017 Zeng W, Xie J, Zhou D, Fu Z, Zhang D, Lavernia EJ. In-situ formation of NbC in nanocrystalline Cu Journal of Alloys and Compounds. 725: 334-341. DOI: 10.1016/J.Jallcom.2017.07.179  0.425
2017 Wu C, Wu J, Ma K, Zhang D, Xiong S, Zhang J, Luo G, Chen F, Shen Q, Zhang L, Lavernia EJ. Synthesis of AA7075-AA7075/B4C bilayer composite with enhanced mechanical strength via plasma activated sintering Journal of Alloys and Compounds. 701: 416-424. DOI: 10.1016/J.Jallcom.2017.01.065  0.351
2017 Yang C, Kang LM, Li XX, Zhang WW, Zhang DT, Fu ZQ, Li YY, Zhang L, Lavernia EJ. Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering Acta Materialia. 132: 491-502. DOI: 10.1016/J.Actamat.2017.04.062  0.42
2017 Liu S, Pan Z, Zhao Y, Topping T, Valiev R, Liao X, Lavernia E, Zhu Y, Wei Q. Effect of strain rate on the mechanical properties of a gum metal with various microstructures Acta Materialia. 132: 193-208. DOI: 10.1016/J.Actamat.2017.04.052  0.737
2017 Xu W, Zhang Y, Cheng G, Mathaudhu SN, Scattergood RO, Koch CC, Lavernia EJ, Zhu Y. On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium Acta Materialia. 131: 457-466. DOI: 10.1016/J.Actamat.2017.04.015  0.31
2017 MacDonald BE, Fu Z, Zheng B, Chen W, Lin Y, Chen F, Zhang L, Ivanisenko J, Zhou Y, Hahn H, Lavernia EJ. Recent Progress in High Entropy Alloy Research Jom. 69: 2024-2031. DOI: 10.1007/S11837-017-2484-6  0.583
2017 Yang NYC, Yee JK, Zheng B,Gaiser K, Reynolds T, Clemon LM, Lu WY, Schoenung JM, Lavernia EJ. Process-Structure-Property Relationships for 316L Stainless Steel Fabricated by Additive Manufacturing and Its Implication for Component Engineering Journal of Thermal Spray Technology. 26: 610-626. DOI: 10.1007/S11666-016-0480-Y  0.808
2017 Koch CC, Langdon TG, Lavernia EJ. Bulk Nanostructured Materials Metallurgical and Materials Transactions A. 48: 5181-5199. DOI: 10.1007/S11661-017-4298-0  0.364
2017 Sun Y, Aindow M, Hebert RJ, Langdon TG, Lavernia EJ. High-pressure torsion-induced phase transformations and grain refinement in Al/Ti composites Journal of Materials Science. 52: 12170-12184. DOI: 10.1007/S10853-017-1331-Z  0.49
2016 Yang S, Chen F, Shen Q, Lavernia EJ, Zhang L. Microstructure and Electrical Properties of AZO/Graphene Nanosheets Fabricated by Spark Plasma Sintering. Materials (Basel, Switzerland). 9. PMID 28773759 DOI: 10.3390/Ma9080638  0.41
2016 Jiang L, Hu T, Yang H, Zhang D, Topping T, Lavernia EJ, Schoenung JM. Deformation of a ceramic/metal interface at the nanoscale. Nanoscale. PMID 27147300 DOI: 10.1039/C6Nr02011A  0.727
2016 Zheng B, Yang N, Yee J, Gaiser K, Lu WY, Clemon L, Zhou Y, Lavernia EJ, Schoenung JM. Review on laser powder injection additive manufacturing of novel alloys and composites Proceedings of Spie. 9738. DOI: 10.1117/12.2217909  0.811
2016 Li Z, Zheng B, Kurmanaeva LR, Zhou YZ, Valiev RZ, Lavernia EJ. High-strain induced reverse martensitic transformation in an ultrafine-grained Ti-Nb-Ta-Zr alloy Philosophical Magazine Letters. 96: 189-195. DOI: 10.1080/09500839.2016.1189098  0.616
2016 Hu T, Ma K, Topping TD, Jiang L, Zhang D, Mukherjee AK, Schoenung JM, Lavernia EJ. Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending Scripta Materialia. 113: 35-38. DOI: 10.1016/J.Scriptamat.2015.10.008  0.716
2016 Hansel A, Mori M, Fujishima M, Oda Y, Hyatt G, Lavernia E, Delplanque JP. Study on Consistently Optimum Deposition Conditions of Typical Metal Material Using Additive/Subtractive Hybrid Machine Tool Procedia Cirp. 46: 579-582. DOI: 10.1016/J.Procir.2016.04.113  0.608
2016 Wu C, Ma K, Wu J, Fang P, Luo G, Chen F, Shen Q, Zhang L, Schoenung JM, Lavernia EJ. Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites Materials Science and Engineering A. 675: 421-430. DOI: 10.1016/J.Msea.2016.08.062  0.41
2016 Tang L, Zhao Y, Islamgaliev RK, Tsao CYA, Valiev RZ, Lavernia EJ, Zhu YT. Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 670: 280-291. DOI: 10.1016/J.Msea.2016.06.031  0.514
2016 Li M, Ma K, Jiang L, Yang H, Lavernia EJ, Zhang L, Schoenung JM. Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites Materials Science and Engineering A. 656: 241-248. DOI: 10.1016/J.Msea.2016.01.031  0.462
2016 Fiebig J, Jian J, Kurmanaeva L, McCrea J, Wang H, Lavernia E, Mukherjee A. Deformation behavior of multilayered NiFe with bimodal grain size distribution at room and elevated temperature Materials Science and Engineering A. 656: 174-183. DOI: 10.1016/J.Msea.2015.12.075  0.46
2016 Behm N, Yang H, Shen J, Ma K, Kecskes LJ, Lavernia EJ, Schoenung JM, Wei Q. Quasi-static and high-rate mechanical behavior of aluminum-based MMC reinforced with boron carbide of various length scales Materials Science and Engineering A. 650: 305-316. DOI: 10.1016/J.Msea.2015.10.064  0.428
2016 Kurmanaeva L, McCrea J, Jian J, Fiebig J, Wang H, Mukherjee AK, Lavernia EJ. Influence of layer thickness on mechanical properties of multilayered NiFe samples processed by electrodeposition Materials and Design. 90: 389-395. DOI: 10.1016/J.Matdes.2015.10.137  0.325
2016 Zou L, Chen F, Chen X, Lin Y, Shen Q, Lavernia EJ, Zhang L. Fabrication and mechanical behavior of porous Cu via chemical de-alloying of Cu25Fe75 alloys Journal of Alloys and Compounds. 689: 6-14. DOI: 10.1016/J.Jallcom.2016.07.258  0.481
2016 Liu D, Xiong Y, Li P, Lin Y, Chen F, Zhang L, Schoenung JM, Lavernia EJ. Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering Journal of Alloys and Compounds. 679: 426-435. DOI: 10.1016/J.Jallcom.2016.04.073  0.531
2016 Zhang J, Ouyang Q, Guo Q, Li Z, Fan G, Su Y, Jiang L, Lavernia EJ, Schoenung JM, Zhang D. 3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites Composites Science and Technology. 123: 1-9. DOI: 10.1016/J.Compscitech.2015.11.014  0.413
2016 Tang L, Liu W, Ding Z, Zhang D, Zhao Y, Lavernia EJ, Zhu Y. Alloying Mg with Gd and Y: Increasing both plasticity and strength Computational Materials Science. 115: 85-91. DOI: 10.1016/J.Commatsci.2016.01.003  0.428
2016 Fraga MB, Delplanque JP, Yang N, Lavernia EJ, Monson TC. High pressure FAST of nanocrystalline barium titanate Ceramics International. 42: 13868-13875. DOI: 10.1016/J.Ceramint.2016.05.193  0.683
2016 Zhang D, Wen H, Kumar MA, Chen F, Zhang L, Beyerlein IJ, Schoenung JM, Mahajan S, Lavernia EJ. Yield symmetry and reduced strength differential in Mg-2.5Y alloy Acta Materialia. 120: 75-85. DOI: 10.1016/J.Actamat.2016.08.037  0.472
2016 Fu Z, Chen W, Wen H, Zhang D, Chen Z, Zheng B, Zhou Y, Lavernia EJ. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy Acta Materialia. 107: 59-71. DOI: 10.1016/J.Actamat.2016.01.050  0.666
2016 Jiang L, Yang H, Yee JK, Mo X, Topping T, Lavernia EJ, Schoenung JM. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles Acta Materialia. 103: 128-140. DOI: 10.1016/J.Actamat.2015.09.057  0.722
2016 Ma K, Hu T, Yang H, Topping T, Yousefiani A, Lavernia EJ, Schoenung JM. Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al-Zn-Mg alloys Acta Materialia. 103: 153-164. DOI: 10.1016/J.Actamat.2015.09.017  0.79
2016 Wang C, Lavernia EJ, Wu G, Liu W, Ding W. Influence of Pressure and Temperature on Microstructure and Mechanical Behavior of Squeeze Cast Mg-10Gd-3Y-0.5Zr Alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-12. DOI: 10.1007/S11661-016-3546-Z  0.506
2016 Liu Q, Wen H, Zhang H, Gu J, Li C, Lavernia EJ. Effect of Multistage Heat Treatment on Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 1960-1974. DOI: 10.1007/S11661-016-3389-7  0.439
2016 Wang C, Wu G, Lavernia EJ, Ding W. Influences of heat treatment on microstructural evolution and tensile behavior of squeeze-cast Mg–Gd–Y–Zr alloy Journal of Materials Science. 1-16. DOI: 10.1007/S10853-016-0473-8  0.428
2016 Yang C, Lin JA, Ding YF, Zhang WW, Li YY, Fu ZQ, Chen F, Lavernia EJ. Texture evolution and mechanical behavior of commercially pure Ti processed via pulsed electric current treatment Journal of Materials Science. 51: 10608-10619. DOI: 10.1007/S10853-016-0282-0  0.442
2016 Yang C, Yao Y, Huan Y, Fu Z, Chen F, Lavernia EJ. Tough TiB2‐Based Ceramic Composites Using Metallic Glass Powder as the Sintering Aid Advanced Engineering Materials. 18: 1936-1943. DOI: 10.1002/Adem.201600234  0.398
2015 Wen H, Lin Y, Seidman DN, Schoenung JM, van Rooyen IJ, Lavernia EJ. An Efficient and Cost-Effective Method for Preparing Transmission Electron Microscopy Samples from Powders. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 1-11. PMID 26350148 DOI: 10.1017/S1431927615014695  0.349
2015 Maiti A, Reddy L, Chen F, Zhang L, Schoenung JM, Lavernia EJ, Laha T. Carbon nanotube-reinforced Al alloy-based nanocomposites via spark plasma sintering Journal of Composite Materials. 49: 1937-1946. DOI: 10.1177/0021998314541304  0.387
2015 Yang H, Lavernia EJ, Schoenung JM. Novel fabrication of bulk Al with gradient grain size distributions via powder metallurgy Philosophical Magazine Letters. 95: 177-186. DOI: 10.1080/09500839.2015.1028504  0.444
2015 Chen F, Chen X, Zou L, Yao Y, Lin Y, Shen Q, Lavernia EJ, Zhang L. Fabrication and mechanical behavior of bulk nanoporous Cu via chemical de-alloying of Cu-Al alloys Materials Science and Engineering A. DOI: 10.1016/J.Msea.2016.02.055  0.465
2015 Balog M, Hu T, Krizik P, Castro Riglos MV, Saller BD, Yang H, Schoenung JM, Lavernia EJ. On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network Materials Science and Engineering A. 648: 61-71. DOI: 10.1016/J.Msea.2015.09.037  0.397
2015 Fu Z, Chen W, Wen H, Morgan S, Chen F, Zheng B, Zhou Y, Zhang L, Lavernia EJ. Microstructure and mechanical behavior of a novel Co20Ni20Fe20Al20Ti20 alloy fabricated by mechanical alloying and spark plasma sintering Materials Science and Engineering A. 644: 10-16. DOI: 10.1016/J.Msea.2015.07.052  0.656
2015 Song J, Guo Q, Ouyang Q, Su Y, Zhang J, Lavernia EJ, Schoenung JM, Zhang D. Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al-Zn-Mg-Cu composites Materials Science and Engineering A. 644: 79-84. DOI: 10.1016/J.Msea.2015.07.050  0.455
2015 Sun Y, Haley J, Kulkarni K, Aindow M, Sachdev AK, Lavernia EJ. Influence of electric current on microstructure evolution in Ti/Al and Ti/TiAl3 during spark plasma sintering Journal of Alloys and Compounds. 648: 1097-1103. DOI: 10.1016/J.Jallcom.2015.07.079  0.444
2015 Fu Z, Chen W, Wen H, Chen Z, Lavernia EJ. Effects of Co and sintering method on microstructure and mechanical behavior of a high-entropy Al0.6NiFeCrCo alloy prepared by powder metallurgy Journal of Alloys and Compounds. 646: 175-182. DOI: 10.1016/J.Jallcom.2015.04.238  0.464
2015 Kurmanaeva L, Topping TD, Wen H, Sugahara H, Yang H, Zhang D, Schoenung JM, Lavernia EJ. Strengthening mechanisms and deformation behavior of cryomilled Al-Cu-Mg-Ag alloy Journal of Alloys and Compounds. 632: 591-603. DOI: 10.1016/J.Jallcom.2015.01.160  0.78
2015 Hu T, Jiang L, Yang H, Ma K, Topping TD, Yee J, Li M, Mukherjee AK, Schoenung JM, Lavernia EJ. Stabilized plasticity in ultrahigh strength, submicron Al crystals Acta Materialia. 94: 46-58. DOI: 10.1016/J.Actamat.2015.04.044  0.744
2015 Jiang L, Wen H, Yang H, Hu T, Topping T, Zhang D, Lavernia EJ, Schoenung JM. Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix Acta Materialia. 89: 327-343. DOI: 10.1016/J.Actamat.2015.01.062  0.742
2015 Lin Y, Wen H, Li Y, Wen B, Liu W, Lavernia EJ. An analytical model for stress-induced grain growth in the presence of both second-phase particles and solute segregation at grain boundaries Acta Materialia. 82: 304-315. DOI: 10.1016/J.Actamat.2014.08.059  0.403
2015 Yang N, Yee JK, Zhang Z, Kurmanaeva L, Cappillino P, Stavila V, Lavernia EJ, San Marchi C. Hydrogen sorption characteristics of nanostructured Pd-10Rh processed by cryomilling Acta Materialia. 82: 41-50. DOI: 10.1016/J.Actamat.2014.08.056  0.392
2015 Zhang Y, Sabbaghianrad S, Yang H, Topping TD, Langdon TG, Lavernia EJ, Schoenung JM, Nutt SR. Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5877-5886. DOI: 10.1007/S11661-015-3151-6  0.778
2015 Li Z, Sun Y, Lavernia EJ, Shan A. Mechanical Behavior of Ultrafine-Grained Ti-6Al-4V Alloy Produced by Severe Warm Rolling: The Influence of Starting Microstructure and Reduction Ratio Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 5047-5057. DOI: 10.1007/S11661-015-3080-4  0.55
2015 Zhang Y, Topping TD, Yang H, Lavernia EJ, Schoenung JM, Nutt SR. Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1196-1204. DOI: 10.1007/S11661-014-2729-8  0.759
2015 Saller BD, Hu T, Ma K, Kurmanaeva L, Lavernia EJ, Schoenung JM. A comparative analysis of solubility, segregation, and phase formation in atomized and cryomilled Al–Fe alloy powders Journal of Materials Science. 50: 4683-4697. DOI: 10.1007/S10853-015-9019-8  0.468
2015 Hashemi-Sadraei L, Mousavi SE, Lavernia EJ, Schoenung JM. The Influence of Grain Size Determination Method on Grain Growth Kinetics Analysis Advanced Engineering Materials. 17: 1598-1607. DOI: 10.1002/Adem.201500057  0.431
2014 Li Z, Chen D, Wang H, Lavernia EJ, Shan A. Nano-TiB2 reinforced ultrafine-grained pure Al produced by flux-assisted synthesis and asymmetrical rolling Journal of Materials Research. 29: 2514-2524. DOI: 10.1557/Jmr.2014.280  0.488
2014 Bahmanpour H, Sun Y, Hu T, Zhang D, Wongsa-Ngam J, Langdon TG, Lavernia EJ. Microstructural evolution of cryomilled Ti/Al mixture during high-pressure torsion Journal of Materials Research. 29: 578-585. DOI: 10.1557/Jmr.2014.18  0.47
2014 Chen F, Yang S, Wu J, Galaviz Perez JA, Shen Q, Schoenung JM, Lavernia EJ, Zhang L. Spark Plasma Sintering and Densification Mechanisms of Conductive Ceramics under Coupled Thermal/Electric Fields Journal of the American Ceramic Society. 98: 732-740. DOI: 10.1111/Jace.13381  0.334
2014 Kurmanaeva L, Bahmanpour H, Holland T, McCrea J, Lee JH, Jian J, Wang H, Lavernia EJ, Mukherjee AK. Room temperature mechanical behaviour of a Ni-Fe multilayered material with modulated grain size distribution Philosophical Magazine. 94: 3549-3559. DOI: 10.1080/14786435.2014.964346  0.481
2014 Huang L, Topping TD, Yang H, Lavernia EJ, Schoenung JM. Nanoscratch-induced deformation behaviour in B 4C particle reinforced ultrafine grained Al alloy composites: A novel diagnostic approach Philosophical Magazine. 94: 1754-1763. DOI: 10.1080/14786435.2014.895442  0.759
2014 Sun PL, Zhao Y, Tseng TY, Su JR, Lavernia EJ. Annealing behaviour of ultrafine-grained aluminium Philosophical Magazine. 94: 476-491. DOI: 10.1080/14786435.2013.856526  0.461
2014 Liu D, Wen H, Zhang D, Wang C, Lin Y, Xiong Y, Topping T, Schoenung JM, Lavernia EJ. Stress-enhanced grain growth in a nanostructured aluminium alloy during spark plasma sintering Philosophical Magazine Letters. 94: 741-748. DOI: 10.1080/09500839.2014.975295  0.494
2014 Sun Y, Kulkani K, Aindow M, Sachdev A, Lavernia E. EPMA studies on reactions between Ti and Al during spark plasma sintering Microscopy and Microanalysis. 20: 756-757. DOI: 10.1017/S1431927614005509  0.332
2014 Zheng B, Zhou Y, Mathaudhu SN, Valiev RZ, Tsao CYA, Schoenung JM, Lavernia EJ. Multiple and extended shear band formation in MgCuGd metallic glass during high-pressure torsion Scripta Materialia. 86: 24-27. DOI: 10.1016/J.Scriptamat.2014.04.023  0.565
2014 Hu T, Ma K, Topping TD, Saller B, Yousefiani A, Schoenung JM, Lavernia EJ. Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle Scripta Materialia. 78: 25-28. DOI: 10.1016/J.Scriptamat.2014.01.020  0.77
2014 Zhang D, Zheng B, Zhou Y, Mahajan S, Lavernia EJ. Prism stacking faults observed contiguous to a {10-12} twin in a Mg–Y alloy Scripta Materialia. 76: 61-64. DOI: 10.1016/J.Scriptamat.2013.12.015  0.538
2014 Fu Z, Chen W, Chen Z, Wen H, Lavernia EJ. Influence of Ti addition and sintering method on microstructure and mechanical behavior of a medium-entropy Al 0.6 CoNiFe alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 619: 137-145. DOI: 10.1016/J.Msea.2014.09.077  0.496
2014 Yang H, Topping TD, Wehage K, Jiang L, Lavernia EJ, Schoenung JM. Tensile behavior and strengthening mechanisms in a submicron B4C-reinforced Al trimodal composite Materials Science and Engineering A. 616: 35-43. DOI: 10.1016/J.Msea.2014.07.079  0.776
2014 Yang Y, Peng X, Wen H, Wei G, Xie W, Lavernia EJ. Microstructure and mechanical behavior of Mg–10Li–3Al–2.5Sr alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 611: 1-8. DOI: 10.1016/J.Msea.2014.05.064  0.515
2014 Nguyen J, Wen H, Zhang Z, Yaghmaie F, Lavernia E. Surfactant Assisted Dispersion and Adhesion Behavior of Carbon Nanotubes on Cu–Zr and Cu–Zr–Al Amorphous Powders Journal of Materials Science & Technology. 30: 847-853. DOI: 10.1016/J.Jmst.2014.07.002  0.35
2014 Wu C, Fang P, Luo G, Chen F, Shen Q, Zhang L, Lavernia EJ. Effect of plasma activated sintering parameters on microstructure and mechanical properties of Al-7075/B4C composites Journal of Alloys and Compounds. 615: 276-282. DOI: 10.1016/J.Jallcom.2014.06.110  0.472
2014 Lin Y, Xu B, Feng Y, Lavernia EJ. Stress-induced grain growth during high-temperature deformation of nanostructured Al containing nanoscale oxide particles Journal of Alloys and Compounds. 596: 79-85. DOI: 10.1016/J.Jallcom.2014.01.189  0.468
2014 Cappillino PJ, Lavernia EJ, Ong MD, Wolfer WG, Yang NY. Plastic deformation and hysteresis for hydrogen storage in Pd-Rh alloys Journal of Alloys and Compounds. 586: 59-65. DOI: 10.1016/J.Jallcom.2013.10.033  0.406
2014 Ma K, Wen H, Hu T, Topping TD, Isheim D, Seidman DN, Lavernia EJ, Schoenung JM. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy Acta Materialia. 62: 141-155. DOI: 10.1016/J.Actamat.2013.09.042  0.786
2014 Jiang L, Ma K, Yang H, Li M, Lavernia EJ, Schoenung JM. The microstructural design of trimodal aluminum composites Jom. 66: 898-908. DOI: 10.1007/S11837-014-0906-2  0.489
2014 Lin Y, Wen H, Li Y, Wen B, Liu W, Lavernia EJ. Erratum to: Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy Metallurgical and Materials Transactions B. 45: 1948-1964. DOI: 10.1007/S11663-014-0138-4  0.464
2014 Harrell TJ, Topping TD, Wen H, Hu T, Schoenung JM, Lavernia EJ. Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 6329-6343. DOI: 10.1007/S11661-014-2569-6  0.786
2014 Ma K, Smith T, Hu T, Topping TD, Lavernia EJ, Schoenung JM. Distinct hardening behavior of ultrafine-grained Al-Zn-Mg-Cu alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 4762-4765. DOI: 10.1007/S11661-014-2498-4  0.749
2014 Li Z, Yang X, Zhang J, Zheng B, Zhou Y, Shan A, Lavernia EJ. Microstructure Evolution and Mechanical Behavior of Cold-Sprayed, Bulk Nanostructured Titanium Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 45: 5017-5028. DOI: 10.1007/S11661-014-2434-7  0.671
2014 Sun Y, Kulkarni K, Sachdev AK, Lavernia EJ. Synthesis of γ-TiAl by Reactive Spark Plasma Sintering of Cryomilled Ti and Al Powder Blend: Part II: Effects of Electric Field and Microstructure on Sintering Kinetics Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 2759-2767. DOI: 10.1007/S11661-014-2216-2  0.445
2014 Sun Y, Kulkarni K, Sachdev AK, Lavernia EJ. Synthesis of γ-tial by reactive spark plasma sintering of cryomilled ti and al powder blend, part i: Influence of processing and Microstructural evolution Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 2750-2758. DOI: 10.1007/S11661-014-2215-3  0.485
2014 Zhang Y, Topping TD, Lavernia EJ, Nutt SR. Dynamic micro-strain analysis of ultrafine-grained aluminum magnesium alloy using digital image correlation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 47-54. DOI: 10.1007/S11661-013-1805-9  0.761
2014 Li Z, Zheng B, Wang Y, Topping T, Zhou Y, Valiev RZ, Shan A, Lavernia EJ. Ultrafine-grained Ti-Nb-Ta-Zr alloy produced by ECAP at room temperature Journal of Materials Science. 49: 6656-6666. DOI: 10.1007/S10853-014-8337-6  0.822
2014 Nguyen JV, Holland TB, Wen H, Fraga MB, Mukherjee AK, Lavernia EJ. Mechanical behavior of ultrafine-grained Ni–carbon nanotube composite Journal of Materials Science. 49: 2070-2077. DOI: 10.1007/S10853-013-7897-1  0.434
2013 Xie KY, Wang Y, Zhao Y, Chang L, Wang G, Chen Z, Cao Y, Liao X, Lavernia EJ, Valiev RZ, Sarrafpour B, Zoellner H, Ringer SP. Nanocrystalline β-Ti alloy with high hardness, low Young's modulus and excellent in vitro biocompatibility for biomedical applications. Materials Science & Engineering. C, Materials For Biological Applications. 33: 3530-6. PMID 23706243 DOI: 10.1016/J.Msec.2013.04.044  0.508
2013 Zhang Z, Yee JK, Sharma PA, Yang N, Lavernia EJ. Influence of porosity o. The transport properties of Bi2Te 3-based alloys by field-assisted sintering Journal of Materials Research. 28: 1853-1861. DOI: 10.1557/Jmr.2013.99  0.373
2013 Topping TD, Ahn B, Nutt SR, Lavernia EJ. Influence of hot isostatic pressing on microstructure and mechanical behaviour of nanostructured Al alloy Powder Metallurgy. 56: 276-287. DOI: 10.1179/1743290112Y.0000000034  0.783
2013 Topping TD, Hu T, Manigandan K, Srivatsan TS, Lavernia EJ. Quasi-static deformation and final fracture behaviour of aluminium alloy 5083: Influence of cryomilling Philosophical Magazine. 93: 899-921. DOI: 10.1080/14786435.2012.735774  0.766
2013 Wen H, Islamgaliev RK, Nesterov KM, Valiev RZ, Lavernia EJ. Dynamic balance between grain refinement and grain growth during high-pressure torsion of Cu powders Philosophical Magazine Letters. 93: 481-489. DOI: 10.1080/09500839.2013.805268  0.44
2013 Zheng B, Li Y, Xu W, Zhou Y, Mathaudhu SN, Zhu Y, Lavernia EJ. Twinning in cryomilled nanocrystalline Mg powder Philosophical Magazine Letters. 93: 457-464. DOI: 10.1080/09500839.2013.801567  0.608
2013 Wen H, Ma K, Isheim D, Seidman D, Schoenung J, Lavernia E. Atom-Probe Tomographic Study of Precipitation in an Ultrafine-Grained Al-Zn-Mg-Cu Alloy (Al 7075) Microscopy and Microanalysis. 19: 1024-1025. DOI: 10.1017/S1431927613007113  0.444
2013 Kulkarni KN, Sun Y, Sachdev AK, Lavernia E. Field-activated sintering of blended elemental γ-TiAl powder compacts: Porosity analysis and growth kinetics of Al3Ti Scripta Materialia. 68: 841-844. DOI: 10.1016/J.Scriptamat.2013.02.004  0.428
2013 Wu F, Wen H, Lavernia EJ, Narayan JA, Zhu Y. Twin intersection mechanisms in nanocrystalline fcc metals Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 585: 292-296. DOI: 10.1016/J.Msea.2013.07.063  0.441
2013 Lin Y, Liu W, Wang L, Lavernia EJ. Ultra-fine grained structure in Al–Mg induced by discontinuous dynamic recrystallization under moderate straining Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 573: 197-204. DOI: 10.1016/J.Msea.2013.02.061  0.398
2013 Zheng B, Ashford D, Zhou Y, Mathaudhu SN, Delplanque JP, Lavernia EJ. Influence of mechanically milled powder and high pressure on spark plasma sintering of Mg-Cu-Gd metallic glasses Acta Materialia. 61: 4414-4428. DOI: 10.1016/J.Actamat.2013.04.011  0.749
2013 Yin WH, Xu F, Ertorer O, Pan Z, Zhang XY, Kecskes LJ, Lavernia EJ, Wei Q. Mechanical behavior of microstructure engineered multi-length-scale titanium over a wide range of strain rates Acta Materialia. 61: 3781-3798. DOI: 10.1016/J.Actamat.2013.03.011  0.834
2013 Hu T, Ma K, Topping TD, Schoenung JM, Lavernia EJ. Precipitation phenomena in an ultrafine-grained Al alloy Acta Materialia. 61: 2163-2178. DOI: 10.1016/J.Actamat.2012.12.037  0.768
2013 Wen H, Topping TD, Isheim D, Seidman DN, Lavernia EJ. Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering Acta Materialia. 61: 2769-2782. DOI: 10.1016/J.Actamat.2012.09.036  0.783
2013 Liu D, Xiong Y, Li Y, Topping TD, Zhou Y, Haines C, Paras J, Martin D, Kapoor D, Schoenung JM, Lavernia EJ. Spark plasma sintering of nanostructured aluminum: Influence of tooling material on microstructure Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 1908-1916. DOI: 10.1007/S11661-012-1533-6  0.746
2013 Yang Y, Peng X, Wen H, Zheng B, Zhou Y, Xie W, Lavernia EJ. Influence of Extrusion on the Microstructure and Mechanical Behavior of Mg-9Li-3Al-xSr Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 44: 1101-1113. DOI: 10.1007/S11661-012-1441-9  0.689
2013 Abdu MT, Dheda SS, Lavernia EJ, Topping TD, Mohamed FA. Creep and microstructure in ultrafine-grained 5083 Al Journal of Materials Science. 48: 3294-3303. DOI: 10.1007/S10853-012-7115-6  0.781
2012 Topping TD, Li Y, Lavernia EJ, Manigandan K, Srivatsan TS. The influence of processing on microstructural development, tensile response and fracture behavior of aluminum alloy 5083 Advanced Materials Research. 410: 175-186. DOI: 10.4028/Www.Scientific.Net/Amr.410.175  0.766
2012 Zhang Z, Li Y, Vogt R, Zhou Y, Schoenung JM, Lavernia EJ. Critical grain size for nanocrystalline-to-amorphous phase transition in Al solid solution Philosophical Magazine Letters. 92: 235-244. DOI: 10.1080/09500839.2012.658877  0.422
2012 Li Y, Topping T, Zhang Z, Vogt R, Schoenung J, Lavernia E. Precipitation in Al 5083/B4C Metal Matrix Composites: A TEM Study Microscopy and Microanalysis. 18: 1902-1903. DOI: 10.1017/S1431927612011361  0.707
2012 Wen H, Lavernia EJ. Twins in cryomilled and spark plasma sintered Cu-Zn-Al Scripta Materialia. 67: 245-248. DOI: 10.1016/J.Scriptamat.2012.04.024  0.467
2012 Lin Y, Zhang Y, Xiong B, Lavernia EJ. Achieving high tensile elongation in an ultra-fine grained Al alloy via low dislocation density Materials Letters. 82: 233-236. DOI: 10.1016/J.Matlet.2012.05.046  0.494
2012 Magee A, Ladani L, Topping TD, Lavernia EJ. Effects of tensile test parameters on the mechanical properties of a bimodal Al-Mg alloy Acta Materialia. 60: 5838-5849. DOI: 10.1016/J.Actamat.2012.07.024  0.77
2012 Lin Y, Yao B, Zhang Z, Li Y, Sohn Y, Schoenung JM, Lavernia EJ. Strain Energy During Mechanical Milling: Part I. Mathematical Modeling Metallurgical and Materials Transactions A. 43: 4247-4257. DOI: 10.1007/S11661-012-1223-4  0.335
2012 Lin Y, Yao B, Zhang Z, Li Y, Sohn Y, Schoenung JM, Lavernia EJ. Strain Energy During Mechanical Milling: Part II. Experimental Metallurgical and Materials Transactions A. 43: 4258-4265. DOI: 10.1007/S11661-012-1221-6  0.349
2012 Topping TD, Ahn B, Li Y, Nutt SR, Lavernia EJ. Influence of process parameters on the mechanical behavior of an ultrafine-grained Al alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 505-519. DOI: 10.1007/S11661-011-0849-Y  0.801
2012 Liu D, Xiong Y, Topping TD, Zhou Y, Haines C, Paras J, Martin D, Kapoor D, Schoenung JM, Lavernia EJ. Spark plasma sintering of cryomilled nanocrystalline Al alloy - Part II: Influence of processing conditions on densification and properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 340-350. DOI: 10.1007/S11661-011-0841-6  0.761
2012 Wen H, Zhao Y, Topping TD, Ashford D, Figueiredo RB, Xu C, Langdon TG, Lavernia EJ. Influence of pressing temperature on microstructure evolution and mechanical behavior of ultrafine-grained cu processed by equal-channel angular pressing Advanced Engineering Materials. 14: 185-194. DOI: 10.1002/Adem.201100080  0.736
2012 Topping TD, Chan L, Lavernia EJ. Microstructural evolution of a strain-hardened, ultra-fine grained Al-Mg alloy Materials Science and Technology Conference and Exhibition 2012, Ms and T 2012. 1: 752-759.  0.772
2011 Zhang Z, Sharma PA, Lavernia EJ, Yang N. Thermoelectric and transport properties of nanostructured Bi 2Te3 by spark plasma sintering Journal of Materials Research. 26: 475-484. DOI: 10.1557/Jmr.2010.67  0.436
2011 Zheng B, Li Y, Smugeresky JE, Zhou Y, Baker D, Lavernia EJ. Hybrid Al + Al3Ni metallic foams synthesized in situ via laser engineered net shaping Philosophical Magazine. 91: 3473-3497. DOI: 10.1080/14786435.2011.586375  0.64
2011 Zhang Z, Topping T, Li Y, Vogt R, Zhou Y, Haines C, Paras J, Kapoor D, Schoenung JM, Lavernia EJ. Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles Scripta Materialia. 65: 652-655. DOI: 10.1016/J.Scriptamat.2011.06.037  0.75
2011 Ni S, Wang YB, Liao XZ, Alhajeri SN, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Langdon TG, Zhu YT. Grain growth and dislocation density evolution in a nanocrystalline Ni-Fe alloy induced by high-pressure torsion Scripta Materialia. 64: 327-330. DOI: 10.1016/J.Scriptamat.2010.10.027  0.492
2011 Li Y, Lin Y, Xiong Y, Schoenung J, Lavernia E. Extended twinning phenomena in Al–4%Mg alloys/B4C nanocomposite Scripta Materialia. 64: 133-136. DOI: 10.1016/J.Scriptamat.2010.09.027  0.487
2011 Ni S, Wang YB, Liao XZ, Figueiredo RB, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Langdon TG, Zhu YT. Strain softening in nanocrystalline Ni-Fe alloy induced by large HPT revolutions Materials Science and Engineering A. 528: 4807-4811. DOI: 10.1016/J.Msea.2011.03.007  0.467
2011 Ni S, Wang YB, Liao XZ, Alhajeri SN, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Langdon TG, Zhu YT. Strain hardening and softening in a nanocrystalline Ni-Fe alloy induced by severe plastic deformation Materials Science and Engineering A. 528: 3398-3403. DOI: 10.1016/J.Msea.2011.01.017  0.415
2011 Zheng B, Ertorer O, Li Y, Zhou Y, Mathaudhu SN, Tsao CYA, Lavernia EJ. High strength, nano-structured Mg-Al-Zn alloy Materials Science and Engineering A. 528: 2180-2191. DOI: 10.1016/J.Msea.2010.11.073  0.847
2011 Li Y, Zhang Z, Vogt R, Schoenung J, Lavernia E. Boundaries and interfaces in ultrafine grain composites Acta Materialia. 59: 7206-7218. DOI: 10.1016/J.Actamat.2011.08.005  0.461
2011 Nelson S, Ladani L, Topping T, Lavernia E. Fatigue and monotonic loading crack nucleation and propagation in bimodal grain size aluminum alloy Acta Materialia. 59: 3550-3570. DOI: 10.1016/J.Actamat.2011.02.029  0.741
2011 Xiong Y, Liu D, Li Y, Zheng B, Haines C, Paras J, Martin D, Kapoor D, Lavernia EJ, Schoenung JM. Spark Plasma Sintering of Cryomilled Nanocrystalline Al Alloy - Part I: Microstructure Evolution Metallurgical and Materials Transactions A. 43: 327-339. DOI: 10.1007/S11661-011-0933-3  0.695
2011 Hashemi-Sadraei L, Mousavi SE, Vogt R, Li Y, Zhang Z, Lavernia EJ, Schoenung JM. Influence of Nitrogen Content on Thermal Stability and Grain Growth Kinetics of Cryomilled Al Nanocomposites Metallurgical and Materials Transactions A. 43: 747-756. DOI: 10.1007/S11661-011-0882-X  0.475
2011 Ertorer O, Topping TD, Li Y, Moss W, Lavernia EJ. Nanostructured Ti consolidated via spark plasma sintering Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 964-973. DOI: 10.1007/S11661-010-0499-5  0.825
2011 Wen H, Zhao Y, Zhang Z, Ertorer O, Dong S, Lavernia EJ. The influence of oxygen and nitrogen contamination on the densification behavior of cryomilled copper powders during spark plasma sintering Journal of Materials Science. 46: 3006-3012. DOI: 10.1007/S10853-010-5178-9  0.799
2011 Ma K, Lavernia EJ, Schoenung JM. Absorption of Nitrogen at Al/Al2O3 Interfaces in Al Nanocomposites: A Computational Analysis Advanced Engineering Materials. 14: 77-84. DOI: 10.1002/Adem.201100171  0.405
2011 Zhao Y, Topping T, Li Y, Lavernia EJ. Strength and Ductility of Bi‐Modal Cu Advanced Engineering Materials. 13: 865-871. DOI: 10.1002/Adem.201100019  0.762
2010 Cheng S, Zhao Y, Wang Y, Li Y, Wang XL, Liaw PK, Lavernia EJ. Structure modulation driven by cyclic deformation in nanocrystalline NiFe. Physical Review Letters. 104: 255501. PMID 20867394 DOI: 10.1103/Physrevlett.104.255501  0.391
2010 Liddicoat PV, Liao XZ, Zhao Y, Zhu Y, Murashkin MY, Lavernia EJ, Valiev RZ, Ringer SP. Nanostructural hierarchy increases the strength of aluminium alloys. Nature Communications. 1: 63. PMID 20842199 DOI: 10.1038/Ncomms1062  0.514
2010 Ertorer O, Topping TD, Li Y, Zhao Y, Moss W, Lavernia EJ. Strategies for improving ductility of cryomilled nanostructured titanium Materials Science Forum. 633: 459-469. DOI: 10.4028/Www.Scientific.Net/Msf.633-634.459  0.819
2010 Wen H, Zhao Y, Li Y, Ertorer O, Nesterov KM, Islamgaliev RK, Valiev RZ, Lavernia EJ. High-pressure torsion-induced grain growth and detwinning in cryomilled Cu powders Philosophical Magazine. 90: 4541-4550. DOI: 10.1080/14786435.2010.514579  0.826
2010 Li Y, Zhao YH, Liu W, Zhang ZH, Vogt RG, Lavernia EJ, Schoenung JM. Deformation twinning in boron carbide particles within nanostructured Al 5083/B4C metal matrix composites Philosophical Magazine. 90: 783-792. DOI: 10.1080/14786430903246338  0.389
2010 Wang YB, Zhao YH, Lian Q, Liao XZ, Valiev RZ, Ringer SP, Zhu YT, Lavernia EJ. Grain size and reversible beta-to-omega phase transformation in a Ti alloy Scripta Materialia. 63: 613-616. DOI: 10.1016/J.Scriptamat.2010.05.045  0.44
2010 Vogt R, Zhang Z, Huskins E, Ahn B, Nutt S, Ramesh K, Lavernia E, Schoenung J. High strain rate deformation and resultant damage mechanisms in ultrafine-grained aluminum matrix composites Materials Science and Engineering: A. 527: 5990-5996. DOI: 10.1016/J.Msea.2010.05.092  0.408
2010 Sun PL, Zhao YH, Tseng TY, Su JR, Lavernia EJ. The influence of cooling rate on the microstructures and mechanical properties in ultrafine-grained aluminum processed by hot rolling Materials Science and Engineering A. 527: 5287-5294. DOI: 10.1016/J.Msea.2010.04.087  0.55
2010 Wang YB, Liao XZ, Zhao YH, Lavernia EJ, Ringer SP, Horita Z, Langdon TG, Zhu YT. The role of stacking faults and twin boundaries in grain refinement of a Cu-Zn alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 4959-4966. DOI: 10.1016/J.Msea.2010.04.036  0.469
2010 Li Y, Zhao YH, Liu W, Xu C, Horita Z, Liao XZ, Zhu YT, Langdon TG, Lavernia EJ. Influence of grain size on the density of deformation twins in Cu–30%Zn alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 3942-3948. DOI: 10.1016/J.Msea.2010.02.076  0.478
2010 Zhao YH, Zhan Q, Topping TD, Li Y, Liu W, Lavernia EJ. Improving ductility in ultrafine grained nickel with porosity and segregation via deformation Materials Science and Engineering A. 527: 1744-1750. DOI: 10.1016/J.Msea.2009.10.064  0.775
2010 Ferragut R, Liddicoat PV, Liao X, Zhao Y, Lavernia EJ, Valiev RZ, Dupasquier A, Ringer SP. Chemistry of grain boundary environments in nanocrystalline Al 7075 Journal of Alloys and Compounds. 495: 391-393. DOI: 10.1016/J.Jallcom.2009.10.104  0.47
2010 Li Y, Liu W, Ortalan V, Li WF, Zhang Z, Vogt R, Browning ND, Lavernia EJ, Schoenung JM. HRTEM and EELS study of aluminum nitride in nanostructured Al 5083/B4C processed via cryomilling Acta Materialia. 58: 1732-1740. DOI: 10.1016/J.Actamat.2009.11.015  0.387
2010 Zheng B, Topping T, Smugeresky JE, Zhou Y, Biswas A, Baker D, Lavernia EJ. The influence of Ni-coated TiC on laser-deposited IN625 metal matrix composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 568-573. DOI: 10.1007/S11661-009-0126-5  0.759
2010 Zhang Z, Dallek S, Vogt R, Li Y, Topping TD, Zhou Y, Schoenung JM, Lavernia EJ. Degassing behavior of nanostructured Al and its composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 532-541. DOI: 10.1007/S11661-009-0089-6  0.726
2010 Lee Z, Radmilovic V, Ahn B, Lavernia EJ, Nutt SR. Tensile deformation and fracture mechanism of bulk bimodal ultrafine-grained Al-Mg alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 795-801. DOI: 10.1007/S11661-009-0007-Y  0.468
2010 Ahn B, Mitra R, Lavernia EJ, Nutt SR. Effect of grain size on strain rate sensitivity of cryomilled Al-Mg alloy Journal of Materials Science. 45: 4790-4795. DOI: 10.1007/S10853-010-4664-4  0.535
2010 Lavernia EJ, Srivatsan TS. The rapid solidification processing of materials: Science, principles, technology, advances, and applications Journal of Materials Science. 45: 287-325. DOI: 10.1007/S10853-009-3995-5  0.341
2010 Zhao Y, Zhu Y, Lavernia EJ. Strategies for improving tensile ductility of bulk nanostructured materials Advanced Engineering Materials. 12: 769-778. DOI: 10.1002/Adem.200900335  0.41
2009 Cheng S, Zhao Y, Guo Y, Li Y, Wei Q, Wang XL, Ren Y, Liaw PK, Choo H, Lavernia EJ. High Plasticity and Substantial Deformation in Nanocrystalline NiFe Alloys Under Dynamic Loading. Advanced Materials (Deerfield Beach, Fla.). 21: 5001-4. PMID 25378188 DOI: 10.1002/Adma.200901991  0.48
2009 Chew E, Kim HH, Ferraris C, Zhao YH, Lavernia EJ, Wong CC. Effect of Ppm Level Dopant on Ductility of Ultrafine Grained Gold Wires Materials Science Forum. 449-457. DOI: 10.4028/Www.Scientific.Net/Msf.633-634.449  0.364
2009 Zhao Y, Li Y, Topping TD, Liao X, Zhu Y, Valiev RZ, Lavernia EJ. Ductility of ultrafine-grained copper processed by equal-channel angular pressing International Journal of Materials Research. 100: 1647-1652. DOI: 10.3139/146.110232  0.749
2009 Wang YB, Ho JC, Cao Y, Liao XZ, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Zhu YT. Dislocation density evolution during high pressure torsion of a nanocrystalline Ni–Fe alloy Applied Physics Letters. 94: 91911. DOI: 10.1063/1.3095852  0.497
2009 Vogt R, Zhang Z, Li Y, Bonds M, Browning N, Lavernia E, Schoenung J. The absence of thermal expansion mismatch strengthening in nanostructured metal–matrix composites Scripta Materialia. 61: 1052-1055. DOI: 10.1016/J.Scriptamat.2009.08.025  0.45
2009 Chen F, Li Y, Liu W, Shen Q, Zhang L, Jiang Q, Lavernia EJ, Schoenung JM. Synthesis of α silicon nitride single-crystalline nanowires by nitriding cryomilled nanocrystalline silicon powder Scripta Materialia. 60: 737-740. DOI: 10.1016/J.Scriptamat.2008.12.022  0.314
2009 Ertorer O, Topping T, Li Y, Moss W, Lavernia EJ. Enhanced tensile strength and high ductility in cryomilled commercially pure titanium Scripta Materialia. 60: 586-589. DOI: 10.1016/J.Scriptamat.2008.12.017  0.836
2009 Wang ZW, Wang YB, Liao XZ, Zhao YH, Lavernia EJ, Zhu YT, Horita Z, Langdon TG. Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials Scripta Materialia. 60: 52-55. DOI: 10.1016/J.Scriptamat.2008.08.032  0.42
2009 Li Y, Zhao YH, Ortalan V, Liu W, Zhang ZH, Vogt RG, Browning ND, Lavernia EJ, Schoenung JM. Investigation of aluminum-based nanocomposites with ultra-high strength Materials Science and Engineering A. 527: 305-316. DOI: 10.1016/J.Msea.2009.07.067  0.414
2009 Zhao YH, Guo YZ, Wei Q, Topping TD, Dangelewicz AM, Zhu YT, Langdon TG, Lavernia EJ. Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves Materials Science and Engineering A. 525: 68-77. DOI: 10.1016/J.Msea.2009.06.031  0.722
2009 Sun PL, Zhao YH, Cooley JC, Kassner ME, Horita Z, Langdon TG, Lavernia EJ, Zhu YT. Effect of stacking fault energy on strength and ductility of nanostructured alloys: An evaluation with minimum solution hardening Materials Science and Engineering A. 525: 83-86. DOI: 10.1016/J.Msea.2009.06.030  0.469
2009 Vogt RG, Zhang Z, Topping TD, Lavernia EJ, Schoenung JM. Cryomilled aluminum alloy and boron carbide nano-composite plate Journal of Materials Processing Technology. 209: 5046-5053. DOI: 10.1016/J.Jmatprotec.2009.02.002  0.78
2009 Xiong Y, Hofmeister WH, Cheng Z, Smugeresky JE, Lavernia EJ, Schoenung JM. In situ thermal imaging and three-dimensional finite element modeling of tungsten carbide-cobalt during laser deposition Acta Materialia. 57: 5419-5429. DOI: 10.1016/J.Actamat.2009.07.038  0.362
2009 Zheng B, Lin Y, Zhou Y, Lavernia EJ. Gas Atomization of Amorphous Aluminum Powder: Part II. Experimental Investigation Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 40: 995-1004. DOI: 10.1007/S11663-009-9277-4  0.578
2009 Zheng B, Lin Y, Zhou Y, Lavernia EJ. Gas Atomization of Amorphous Aluminum: Part I. Thermal Behavior Calculations Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 40: 768-778. DOI: 10.1007/S11663-009-9276-5  0.575
2009 Walley JL, Lavernia EJ, Gibeling JC. Low-cycle fatigue of ultra-fine-grained cryomilled 5083 aluminum alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 2622-2630. DOI: 10.1007/S11661-009-9971-5  0.522
2009 Zhang Z, Han B, Huang J, Han Y, Zhou Y, Kakegawa K, Lavernia E. Mechanical Behavior of Cryomilled Ni Superalloy by Spark Plasma Sintering Metallurgical and Materials Transactions A. 40: 2023-2029. DOI: 10.1007/S11661-009-9914-1  0.529
2009 Ajdelsztajn L, Dannenberg J, Lopez J, Yang N, Farmer J, Lavernia EJ. High-Velocity Oxygen Fuel Thermal Spray of Fe-Based Amorphous Alloy: a Numerical and Experimental Study Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 40: 2231-2240. DOI: 10.1007/S11661-009-9900-7  0.415
2009 Zheng B, Zhou Y, Smugeresky JE, Lavernia EJ. Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 40: 1235-1245. DOI: 10.1007/S11661-009-9828-Y  0.621
2009 Ertorer O, Zúñga A, Topping T, Moss W, Lavernia EJ. Mechanical behavior of cryomilled CP-Ti consolidated via quasi-isostatic forging Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 91-103. DOI: 10.1007/S11661-008-9688-X  0.828
2008 Wang X, Allen MR, Burr DB, Lavernia EJ, Jeremić B, Fyhrie DP. Identification of material parameters based on Mohr-Coulomb failure criterion for bisphosphonate treated canine vertebral cancellous bone. Bone. 43: 775-80. PMID 18599390 DOI: 10.1016/J.Bone.2008.05.023  0.324
2008 Wu XL, Liao XZ, Srinivasan SG, Zhou F, Lavernia EJ, Valiev RZ, Zhu YT. New deformation twinning mechanism generates zero macroscopic strain in nanocrystalline metals. Physical Review Letters. 100: 095701. PMID 18352724 DOI: 10.1103/Physrevlett.100.095701  0.42
2008 Zhang Z, Yang N, Zhou Y, Lavernia EJ. Nanocrystal formation in gas-atomized amorphous Al85Ni10La5alloy Philosophical Magazine. 88: 737-753. DOI: 10.1080/14786430801955246  0.415
2008 Hulbert DM, Anders A, Dudina DV, Andersson J, Jiang D, Unuvar C, Anselmi-Tamburini U, Lavernia EJ, Mukherjee AK. The absence of plasma in "spark plasma sintering", Journal of Applied Physics. 104. DOI: 10.1063/1.2963701  0.31
2008 Zhao YH, Bingert JF, Zhu YT, Liao XZ, Valiev RZ, Horita Z, Langdon TG, Zhou YZ, Lavernia EJ. Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density Applied Physics Letters. 92: 81903. DOI: 10.1063/1.2870014  0.486
2008 ZHAO Y, GUO Y, WEI Q, DANGELEWICZ A, XU C, ZHU Y, LANGDON T, ZHOU Y, LAVERNIA E. Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu Scripta Materialia. 59: 627-630. DOI: 10.1016/J.Scriptamat.2008.05.031  0.421
2008 Zhang Z, Han BQ, Zhou Y, Lavernia EJ. Elevated temperature mechanical behavior of bulk nanostructured Al 5083–Al85Ni10La5 composite Materials Science and Engineering: A. 493: 221-225. DOI: 10.1016/J.Msea.2007.08.091  0.509
2008 Lavernia E, Han B, Schoenung J. Cryomilled nanostructured materials: Processing and properties Materials Science and Engineering: A. 493: 207-214. DOI: 10.1016/J.Msea.2007.06.099  0.493
2008 McHugh KM, Lin Y, Zhou Y, Lavernia EJ. Influence of cooling rate on phase formation in spray-formed H13 tool steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 477: 50-57. DOI: 10.1016/J.Msea.2007.05.121  0.366
2008 McHugh KM, Lin Y, Zhou Y, Johnson SB, Delplanque JP, Lavernia EJ. Microstructure evolution during spray rolling and heat treatment of 2124 Al Materials Science and Engineering A. 477: 26-34. DOI: 10.1016/J.Msea.2007.04.130  0.685
2008 Newbery AP, Ahn B, Topping TD, Pao PS, Nutt SR, Lavernia EJ. Large UFG Al alloy plates from cryomilling Journal of Materials Processing Technology. 203: 37-45. DOI: 10.1016/J.Jmatprotec.2007.09.078  0.764
2008 Li Y, Zhao YH, Zhang ZH, Liu W, Ortalan V, Zhou YZ, Ma XL, Lavernia EJ. SnO2 nanobelts and nanocrystals: Synthesis, characterization and optical properties Journal of Crystal Growth. 310: 4226-4232. DOI: 10.1016/J.Jcrysgro.2008.06.046  0.338
2008 Zhang Z, Zhou Y, Lavernia EJ. Amorphization and crystallization in Al-Ni-La during mechanical milling Journal of Alloys and Compounds. 466: 189-200. DOI: 10.1016/J.Jallcom.2007.11.107  0.394
2008 Zheng B, Zhou Y, Smugeresky J, Schoenung J, Lavernia E. Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion Metallurgical and Materials Transactions A. 39: 2237-2245. DOI: 10.1007/S11661-008-9566-6  0.565
2008 Zheng B, Zhou Y, Smugeresky J, Schoenung J, Lavernia E. Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations Metallurgical and Materials Transactions A. 39: 2228-2236. DOI: 10.1007/S11661-008-9557-7  0.559
2008 Newbery AP, Ahn B, Hayes RW, Pao PS, Nutt SR, Lavernia EJ. Consolidation and forging methods for a cryomilled Al alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2193-2205. DOI: 10.1007/S11661-008-9554-X  0.47
2008 Zheng B, Smugeresky JE, Zhou Y, Baker D, Lavernia EJ. Microstructure and properties of laser-deposited Ti6Al4V metal matrix composites using Ni-Coated powder Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 1196-1205. DOI: 10.1007/S11661-008-9498-1  0.616
2008 Ahn B, Lavernia EJ, Nutt SR. Dynamic observations of deformation in an ultrafine-grained Al-Mg alloy with bimodal grain structure Journal of Materials Science. 43: 7403-7408. DOI: 10.1007/S10853-008-2950-1  0.491
2008 Zhao Y, Topping T, Bingert JF, Thornton JJ, Dangelewicz AM, Li Y, Liu W, Zhu Y, Zhou Y, Lavernia EJ. High Tensile Ductility and Strength in Bulk Nanostructured Nickel Advanced Materials. 20: 3028-3033. DOI: 10.1002/Adma.200800214  0.728
2007 Newbery AP, Ahn B, Pao P, Nutt SR, Lavernia EJ. A Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic Forging Advanced Materials Research. 21-29. DOI: 10.4028/Www.Scientific.Net/Amr.29-30.21  0.547
2007 Farmer JC, Haslam JJ, Day SD, Lian T, Saw CK, Hailey PD, Choi JS, Rebak RB, Yang N, Payer JH, Perepezko JH, Hildal K, Lavernia EJ, Ajdelsztajn L, Branagan DJ, et al. Corrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe49.7Cr17.7 Mn1.9Mo7.4W1.6B15.2 C3.8Si2.4 Journal of Materials Research. 22: 2297-2311. DOI: 10.1557/Jmr.2007.0291  0.403
2007 Brochu M, Zimmerly T, Ajdelsztajn L, Lavernia EJ, Kim G. Dynamic consolidation of nanostructured Al-7.5%Mg alloy powders Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 466: 84-89. DOI: 10.1016/J.Msea.2007.02.028  0.511
2007 Ahn B, Newbery AP, Lavernia EJ, Nutt SR. Effect of degassing temperature on the microstructure of a nanocrystalline Al-Mg alloy Materials Science and Engineering A. 463: 61-66. DOI: 10.1016/J.Msea.2006.07.158  0.535
2007 Lin Y, McHugh KM, Zhou Y, Lavernia EJ. Evolution of Carbides during Aging of a Spray-Formed Chromium-Containing Tool Steel Metallurgical and Materials Transactions A. 39: 473-476. DOI: 10.1007/S11661-007-9345-9  0.383
2007 Fan G, Liao H, Choo H, Liaw P, Mara N, Sergueeva A, Mukherjee A, Lavernia E. Fracture of a Commercial Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 Bulk-Metallic Glass Metallurgical and Materials Transactions A. 38: 2001-2005. DOI: 10.1007/S11661-007-9199-1  0.354
2007 Thornton JJ, Han BQ, Lavernia EJ. Grain growth in cryomilled Ni powder during degassing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 1343-1350. DOI: 10.1007/S11661-007-9189-3  0.459
2007 Lin Y, McHugh KM, Zhou Y, Lavernia EJ. Modeling the Spray Forming of H13 Steel Tooling Metallurgical and Materials Transactions A. 38: 1632-1637. DOI: 10.1007/S11661-007-9159-9  0.351
2007 Han BQ, Ye J, Tang F, Schoenung J, Lavernia EJ. Processing and behavior of nanostructured metallic alloys and composites by cryomilling Journal of Materials Science. 42: 1660-1672. DOI: 10.1007/S10853-006-0907-9  0.47
2006 Ajdelsztajn L, Jodoin B, Richer P, Sansoucy E, Lavernia EJ. Cold gas dynamic spraying of iron-base amorphous alloy Journal of Thermal Spray Technology. 15: 495-500. DOI: 10.1361/105996306X146857  0.416
2006 Ajdelsztajn L, Zúñiga A, Jodoin B, Lavernia EJ. Cold-spray processing of a nanocrystalline Al-Cu-Mg-Fe-Ni alloy with Sc Journal of Thermal Spray Technology. 15: 184-190. DOI: 10.1361/105996306X107995  0.723
2006 Jodoin B, Ajdelsztajn L, Sansoucy E, Zúñiga A, Richer P, Lavernia EJ. Effect of particle size, morphology, and hardness on cold gas dynamic sprayed aluminum alloy coatings Surface and Coatings Technology. 201: 3422-3429. DOI: 10.1016/J.Surfcoat.2006.07.232  0.696
2006 Ajdelsztajn L, Zúñiga A, Jodoin B, Lavernia EJ. Cold gas dynamic spraying of a high temperature Al alloy Surface and Coatings Technology. 201: 2109-2116. DOI: 10.1016/J.Surfcoat.2005.06.001  0.735
2006 Lin Y, McHugh KM, Zhou Y, Lavernia EJ. Microstructure and hardness of spray-formed chromium-containing steel tooling Scripta Materialia. 55: 581-584. DOI: 10.1016/J.Scriptamat.2006.06.020  0.398
2006 Han BQ, Huang JY, Zhu YT, Lavernia EJ. Effect of strain rate on the ductility of a nanostructured aluminum alloy Scripta Materialia. 54: 1175-1180. DOI: 10.1016/J.Scriptamat.2005.11.035  0.425
2006 Witkin DB, Lavernia EJ. Synthesis and mechanical behavior of nanostructured materials via cryomilling Progress in Materials Science. 51: 1-60. DOI: 10.1016/J.Pmatsci.2005.04.004  0.49
2006 Sun F, Rojas P, Zúñiga A, Lavernia EJ. Nanostructure in a Ti alloy processed using a cryomilling technique Materials Science and Engineering A. 430: 90-97. DOI: 10.1016/J.Msea.2006.05.136  0.717
2006 Lucadamo G, Yang NYC, Marchi CS, Lavernia EJ. Microstructure characterization in cryomilled Al 5083 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 430: 230-241. DOI: 10.1016/J.Msea.2006.05.039  0.55
2006 Ye R, Smugeresky JE, Zheng B, Zhou Y, Lavernia EJ. Numerical modeling of the thermal behavior during the LENS® process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 428: 47-53. DOI: 10.1016/J.Msea.2006.04.079  0.554
2006 Han BQ, Huang JY, Zhu YT, Lavernia EJ. Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys Acta Materialia. 54: 3015-3024. DOI: 10.1016/J.Actamat.2006.02.045  0.412
2006 Fan GJ, Choo H, Liaw PK, Lavernia EJ. Plastic deformation and fracture of ultrafine-grained Al–Mg alloys with a bimodal grain size distribution Acta Materialia. 54: 1759-1766. DOI: 10.1016/J.Actamat.2005.11.044  0.521
2006 Newbery AP, Nutt SR, Lavernia EJ. Multi-scale Al 5083 for military vehicles with improved performance Jom. 58: 56-61. DOI: 10.1007/S11837-006-0216-4  0.53
2006 Zúñiga A, Ajdelsztajn L, Lavernia EJ. Spark plasma sintering of a nanocrystalline Al-Cu-Mg-Fe-Ni-Sc alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 1343-1352. DOI: 10.1007/S11661-006-1086-7  0.726
2006 Witkin D, Han BQ, Lavernia EJ. Room-temperature mechanical behavior of cryomilled Al alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 185-194. DOI: 10.1007/S11661-006-0163-2  0.555
2006 Roy I, Chauhan M, Mohamed FA, Lavernia EJ. Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy Metallurgical and Materials Transactions A. 37: 721-730. DOI: 10.1007/S11661-006-0044-8  0.457
2006 Joshi SP, Ramesh KT, Han BQ, Lavernia EJ. Modeling the constitutive response of bimodal metals Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2397-2404. DOI: 10.1007/Bf02586214  0.469
2006 Lin Y, Lavernia EJ. Modeling of oxide breakup during equal channel angular pressing of reactively gas-atomized Al powders Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 3317-3322. DOI: 10.1007/Bf02586166  0.329
2006 Zhang Z, Han BQ, Chung KH, Lavernia EJ. On the behavior of microstructures with multiple length scales Metallurgical and Materials Transactions A. 37: 2265-2273. DOI: 10.1007/Bf02586145  0.524
2006 Sun F, Zúñiga A, Rojas P, Lavernia EJ. Thermal stability and recrystallization of nanocrystalline Ti produced by cryogenic milling Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2069-2078. DOI: 10.1007/Bf02586127  0.72
2006 Han BQ, Huang J, Zhu YT, Lavernia EJ. Negative Strain‐rate Sensitivity in a Nanostructured Aluminum Alloy Advanced Engineering Materials. 8: 945-947. DOI: 10.1002/Adem.200600164  0.421
2005 Witkin D, Han BQ, Lavernia EJ. Microstructural evolution of an ultrafine-grained cryomilled Al 5083 alloy during thermomechanical processing Journal of Materials Research. 20: 2117-2126. DOI: 10.1557/Jmr.2005.0261  0.526
2005 Sun FS, Lavernia EJ. Creep behavior of nonburning Ti-35V-15Cr-xC alloys Journal of Materials Engineering and Performance. 14: 784-787. DOI: 10.1361/105994905X75619  0.367
2005 Witkin D, Han BQ, Lavernia EJ. Mechanical behavior of ultrafine-grained cryomilled Al 5083 at elevated temperature Journal of Materials Engineering and Performance. 14: 519-527. DOI: 10.1361/105994905X56232  0.526
2005 Han BQ, Lavernia EJ. Enhanced tensile ductility in a nanostructured Al-7.5%Mg alloy Materials Science and Technology. 21: 855-860. DOI: 10.1179/174328405X47618  0.553
2005 Sergueeva AV, Mara NA, Kuntz JD, Lavernia EJ, Mukherjee AK. Shear band formation and ductility in bulk metallic glass Philosophical Magazine. 85: 2671-2687. DOI: 10.1080/14786430500154059  0.35
2005 Han BQ, Zhang Z, Lavernia EJ. Creep behaviour and thermal stability of cryomilled Al alloy Philosophical Magazine Letters. 85: 97-108. DOI: 10.1080/09500830500153701  0.45
2005 Zhu YT, Liao XZ, Srinivasan SG, Lavernia EJ. Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation Journal of Applied Physics. 98. DOI: 10.1063/1.2006974  0.448
2005 FAN G, WANG G, CHOO H, LIAW P, PARK Y, HAN B, LAVERNIA E. Deformation behavior of an ultrafine-grained Al?Mg alloy at different strain rates Scripta Materialia. 52: 929-933. DOI: 10.1016/J.Scriptamat.2004.12.028  0.405
2005 Lee Z, Witkin DB, Radmilovic V, Lavernia EJ, Nutt SR. Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al-7.5Mg alloy Materials Science and Engineering A. 410: 462-467. DOI: 10.1016/J.Msea.2005.08.104  0.552
2005 Han BQ, Lavernia EJ. High-temperature behavior of a cryomilled ultrafine-grained Al-7.5% Mg alloy Materials Science and Engineering A. 410: 417-421. DOI: 10.1016/J.Msea.2005.08.046  0.523
2005 Shin J, Bae J, Kim H, Lee H, Lee TD, Lavernia E, Lee Z. Ordering–disordering phenomena and micro-hardness characteristics of B2 phase in Fe–(5–6.5%)Si alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 407: 282-290. DOI: 10.1016/J.Msea.2005.07.012  0.327
2005 Fan GJ, Choo H, Liaw PK, Lavernia EJ. A model for the inverse Hall–Petch relation of nanocrystalline materials Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 409: 243-248. DOI: 10.1016/J.Msea.2005.06.073  0.482
2005 Zhang Z, Witkin D, Lavernia EJ. Crystallization behavior of a gas atomized Al85Ni 10La5 amorphous alloy Journal of Non-Crystalline Solids. 351: 1646-1652. DOI: 10.1016/J.Jnoncrysol.2005.04.055  0.447
2005 Rojas P, Ordoñez S, Serafini D, Zúñiga A, Lavernia E. Microstructural evolution during mechanical alloying of Mg and Ni Journal of Alloys and Compounds. 391: 267-276. DOI: 10.1016/J.Jallcom.2004.08.081  0.704
2005 Han BQ, Lavernia EJ, Mohamed FA, Bampton CC. Improvement of toughness and ductility of a cryomilled Al-Mg alloy via microstructural modification Metallurgical and Materials Transactions A. 36: 2081-2091. DOI: 10.1007/S11661-005-0329-3  0.452
2005 Han BQ, Lavernia EJ, Mohamed FA. Mechanical behavior of a cryomilled near-nanostructured Al-Mg-Sc alloy Metallurgical and Materials Transactions A. 36: 345-355. DOI: 10.1007/S11661-005-0307-9  0.509
2005 Han BO, Lavernia EJ, Lee Z, Nutt S, Witkin D. Deformation behavior of bimodal nanostructured 5083 Al alloys Metallurgical and Materials Transactions A. 36: 957-965. DOI: 10.1007/S11661-005-0289-7  0.537
2005 Xun Y, Rodriguez R, Lavernia EJ, Mohamed FA. Processing and microstructural evolution of powder metallurgy Zn-22 Pct Al eutectoid alloy containing nanoscale dispersion particles Metallurgical and Materials Transactions A. 36: 2849-2859. DOI: 10.1007/S11661-005-0280-3  0.527
2005 Fan GJ, Choo H, Liaw PK, Lavernia EJ. Strength softening and stress relaxation of nanostructured materials Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 2641-2649. DOI: 10.1007/S11661-005-0262-5  0.481
2005 Zhou F, Lee Z, Nutt SR, Lavernia EJ. The influence of Sc on thermal stability of a nanocrystalline Al-Mg alloy processed by cryogenic ball milling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 1587-1594. DOI: 10.1007/S11661-005-0250-9  0.529
2005 Lin Y, Zhou Y, Lavernia EJ. Modeling of oxide dispersions in reactively processed Al Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 177-186. DOI: 10.1007/S11661-005-0150-Z  0.336
2005 Ye RQ, Han BQ, Lavernia EJ. Simulation of deformation and failure process in bimodal al alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 1833-1840. DOI: 10.1007/S11661-005-0047-X  0.477
2005 Han BQ, Lavernia EJ. Deformation mechanisms of nanostructured Al alloys Advanced Engineering Materials. 7: 457-465. DOI: 10.1002/Adem.200400219  0.558
2005 Han BQ, Lavernia EJ. High-strain-rate superplasticity in a nanostructured Al-Mg alloy Advanced Engineering Materials. 7: 247-250. DOI: 10.1002/Adem.200400213  0.377
2005 Han BQ, Lavernia EJ. Creep behavior of cryomilled Al-7.5% Mg alloy Materials Science and Technology. 1: 77-86.  0.352
2005 Han BQ, Lavernia EJ. Improvement of ductility and toughness of cryomilled nanostructured Al alloys Mpmd Sixth Global Innovations Proceedings - Trends in Materials and Manufacturing Technologies For Transportation Industries and Powder Metall. Research and Development in the Transportation Industry. 213-218.  0.384
2005 Han BQ, Witkin D, Lavernia EJ. Multiscale nanostructured aluminium alloys: Processing, microstructure and properties Materials Forum. 29: 376-381.  0.475
2004 Han BQ, Mohamed FA, Lavernia EJ. Deformation Mechanisms and Ductility of Nanostructured Al Alloys Mrs Proceedings. 821. DOI: 10.1557/Proc-821-P9.1  0.558
2004 Ye RQ, Han BQ, Lavernia EJ. Deformation and Failure of Nanostructured Materials with Bimodal Grains Mrs Proceedings. 821. DOI: 10.1557/Proc-821-P8.15  0.406
2004 Lin Y, Zhou Y, Lavernia EJ. Microstructural characteristics of oxides in 5083 Al synthesized by reactive atomization and deposition Journal of Materials Research. 19: 3090-3098. DOI: 10.1557/Jmr.2004.0393  0.409
2004 Fan GJ, Lavernia EJ, Wunderlich RK, Fecht H-. The relationship between kinetic and thermodynamic fragilities in metallic glass-forming liquids Philosophical Magazine. 84: 2471-2484. DOI: 10.1080/1478430410001693454  0.301
2004 Zhu YT, Liao XZ, Srinivasan SG, Zhao YH, Baskes MI, Zhou F, Lavernia EJ. Nucleation and growth of deformation twins in nanocrystalline aluminum Applied Physics Letters. 85: 5049-5051. DOI: 10.1063/1.1823042  0.414
2004 Liao XZ, Srinivasan SG, Zhao YH, Baskes MI, Zhu YT, Zhou F, Lavernia EJ, Xu HF. Formation mechanism of wide stacking faults in nanocrystalline Al Applied Physics Letters. 84: 3564-3566. DOI: 10.1063/1.1734689  0.434
2004 He J, Ye J, Lavernia EJ, Matejczyk D, Bampton C, Schoenung JM. Quantitative analysis of grain size in bimodal powders by x-ray diffraction and transmission electron microscopy Journal of Materials Science. 39: 6957-6964. DOI: 10.1023/B:Jmsc.0000047538.95825.Ad  0.458
2004 Lee Z, Zhou F, Valiev RZ, Lavernia EJ, Nutt SR. Microstructure and microhardness of cryomilled bulk nanocrystalline Al-7.5%Mg alloy consolidated by high pressure torsion Scripta Materialia. 51: 209-214. DOI: 10.1016/J.Scriptamat.2004.04.016  0.432
2004 Lin Y, Zhou Y, Hayes RW, Lavernia EJ. Thermal stability of 5083 Al synthesized by reactive atomization and deposition Scripta Materialia. 51: 71-76. DOI: 10.1016/J.Scriptamat.2004.03.009  0.412
2004 McHugh KM, Delplanque JP, Johnson SB, Lavernia EJ, Zhou Y, Lin Y. Spray rolling aluminum alloy strip Materials Science and Engineering A. 383: 96-106. DOI: 10.1016/J.Msea.2004.02.041  0.699
2004 Park YS, Chung KH, Kim NJ, Lavernia EJ. Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 374: 211-216. DOI: 10.1016/J.Msea.2004.02.013  0.476
2004 Xun Y, Lavernia EJ, Mohamed FA. Grain growth in nanocrystalline Zn-22% Al Materials Science and Engineering A. 371: 135-140. DOI: 10.1016/J.Msea.2003.10.298  0.476
2004 Zhou F, Witkin D, Nutt SR, Lavernia EJ. Formation of nanostructure in Al produced by a low-energy ball milling at cryogenic temperature Materials Science and Engineering A. 375: 917-921. DOI: 10.1016/J.Msea.2003.10.235  0.487
2004 Hayes RW, Witkin D, Zhou F, Lavernia EJ. Deformation and activation volumes of cryomilled ultrafine-grained aluminum Acta Materialia. 52: 4259-4271. DOI: 10.1016/J.Actamat.2004.05.042  0.452
2004 Lin Y, Zhou Y, Lavernia EJ. Mechanisms of grain size evolution during aluminum spray forming Solidification of Aluminum Alloys. 331-340. DOI: 10.1007/S11663-008-9193-Z  0.457
2004 Lin Y, Zhou Y, Lavernia EJ. A numerical study of oxidation behavior during reactive atomization and deposition Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 35: 1173-1185. DOI: 10.1007/S11663-004-0072-Y  0.319
2004 Xun Y, Lavernia EJ, Mohamed FA. Synthesis of nanocrystalline Zn-22 pct Al using cryomilling Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 573-581. DOI: 10.1007/S11661-004-0368-1  0.502
2004 Han BQ, Lavernia EJ, Mohamed FA. Dislocation structure and deformation in iron processed by equal-channel-angular pressing Metallurgical and Materials Transactions A. 35: 1343-1350. DOI: 10.1007/S11661-004-0309-Z  0.397
2004 Lin Y, McHugh KM, Zhou Y, Lavernia EJ. The Selection of the Spray Deposition Rate during the Spray Rolling Process Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 35: 3595-3603. DOI: 10.1007/S11661-004-0195-4  0.336
2004 Lin Y, Zhou Y, Lavernia EJ. An analytical model for the oxide size in Al alloys synthesized by reactive atomization and deposition Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 3265-3273. DOI: 10.1007/S11661-004-0069-9  0.324
2004 Lin Y, Zhou Y, Lavernia EJ. On the influence of in-situ reactions on grain size during reactive atomization and deposition Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 3251-3263. DOI: 10.1007/S11661-004-0068-X  0.489
2004 Han BQ, Zhang Z, Lavernia EJ, Matejczyk D, Bampton C, Zhou F, Mohamed FA. Mechanical behavior of a cryomilled nanostructured Al-7.5 pct Mg alloy Metallurgical and Materials Transactions A. 35: 947-949. DOI: 10.1007/S11661-004-0019-6  0.442
2003 Aguilar G, Majaron B, Karapetian E, Lavernia EJ, Nelson JS. Experimental study of cryogen spray properties for application in dermatologic laser surgery. Ieee Transactions On Bio-Medical Engineering. 50: 863-9. PMID 12848354 DOI: 10.1109/Tbme.2003.813537  0.308
2003 Chae Y, Aguilar G, Lavernia EJ, Wong BJ. Characterization of temperature dependent mechanical behavior of cartilage. Lasers in Surgery and Medicine. 32: 271-8. PMID 12696094 DOI: 10.1002/Lsm.10167  0.335
2003 Seo O, Kang S, Lavernia EJ. Growth Inhibition of Nano WC particles in WC-Co Alloys during Liquid-Phase Sintering Materials Transactions. 44: 2339-2345. DOI: 10.2320/Matertrans.44.2339  0.433
2003 Han BQ, Mohamed FA, Bampton C, Lavernia EJ. Mechanical Properties of a Cryomilled Nanostructured Al-Mg Alloy Mrs Proceedings. 791. DOI: 10.1557/Proc-791-Q1.7  0.522
2003 Lee Z, Witkin DB, Lavernia EJ, Nutt SR. Bimodal structured bulk nanocrystalline Al-7.5Mg alloy Materials Research Society Symposium - Proceedings. 791: 3-9. DOI: 10.1557/Proc-791-Q1.6  0.544
2003 Cheng D, Trapaga G, McKelliget JW, Lavernia EJ. Mathematical modelling of high velocity oxygen fuel thermal spraying of nanocrystalline materials: an overview Modelling and Simulation in Materials Science and Engineering. 11. DOI: 10.1088/0965-0393/11/1/201  0.342
2003 Liao XZ, Huang JY, Zhu YT, Zhou F, Lavernia EJ. Nanostructures and deformation mechanisms in a cryogenically ball-milled Al-Mg alloy Philosophical Magazine. 83: 3065-3075. DOI: 10.1080/1478643031000152799  0.51
2003 Huang JY, Liao XZ, Zhu YT, Zhou F, Lavernia EJ. Grain boundary structure of nanocrystalline Cu processed by cryomilling Philosophical Magazine. 83: 1407-1419. DOI: 10.1080/1478643031000083633  0.457
2003 Han BQ, Lavernia EJ, Mohamed FA. Tension and compression of bulk Al-7.5 wt% Mg alloy Philosophical Magazine Letters. 83: 89-96. DOI: 10.1080/0950083021000048154  0.519
2003 Liao XZ, Zhou F, Lavernia EJ, He DW, Zhu YT. Deformation twins in nanocrystalline Al Applied Physics Letters. 83: 5062-5064. DOI: 10.1063/1.1633975  0.451
2003 Liao XZ, Zhou F, Lavernia EJ, Srinivasan SG, Baskes MI, He DW, Zhu YT. Deformation mechanism in nanocrystalline Al: Partial dislocation slip Applied Physics Letters. 83: 632-634. DOI: 10.1063/1.1594836  0.421
2003 Han BQ, Mohamed FA, Lavernia EJ. Journal of Materials Science. 38: 3319-3324. DOI: 10.1023/A:1025150407956  0.568
2003 Foo KH, Chiou WA, Lavernia EJ. TEM Study of Nano-Crystalline Al-Ni-La Powders Obtained by Gas Atomization Microscopy and Microanalysis. 9: 100-101. DOI: 10.1017/S1431927603441056  0.368
2003 Witkin D, Lee Z, Rodriguez R, Nutt S, Lavernia E. Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility Scripta Materialia. 49: 297-302. DOI: 10.1016/S1359-6462(03)00283-5  0.504
2003 Zhou F, Liao X, Zhu Y, Dallek S, Lavernia E. Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling Acta Materialia. 51: 2777-2791. DOI: 10.1016/S1359-6454(03)00083-1  0.539
2003 Rodriguez R, Hayes RW, Berbon PB, Lavernia EJ. Tensile and creep behavior of cryomilled Inco 625 Acta Materialia. 51: 911-929. DOI: 10.1016/S1359-6454(02)00494-9  0.481
2003 Han BQ, Lavernia EJ, Mohamed FA. On the mechanical behavior of a cryomilled Al–Ti–Cu alloy Materials Science and Engineering: A. 358: 318-323. DOI: 10.1016/S0921-5093(03)00284-3  0.516
2003 Lau ML, He J, Schweinfest R, Rühle M, Levi CG, Lavernia EJ. Synthesis and characterization of nanocrystalline Cu-Al coatings Materials Science and Engineering A. 347: 231-242. DOI: 10.1016/S0921-5093(02)00591-9  0.493
2003 Berkowitz AE, Hansen MF, Parker FT, Vecchio KS, Spada FE, Lavernia EJ, Rodriguez R. Amorphous soft magnetic particles produced by spark erosion Journal of Magnetism and Magnetic Materials. 254: 1-6. DOI: 10.1016/S0304-8853(02)00932-0  0.303
2003 Lee Z, Nutt SR, Rodriguez R, Hayes RW, Lavernia EJ. Microstructural evolution and deformation of cryomilled nanocrystalline Al-Ti-Cu Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 1473-1481. DOI: 10.1007/S11661-003-0259-X  0.501
2003 Zhang Z, Zhou F, Lavernia EJ. On the analysis of grain size in bulk nanocrystalline materials via x-ray diffraction Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 1349-1355. DOI: 10.1007/S11661-003-0246-2  0.456
2003 Han BQ, Mohamed FA, Lavernia EJ. Mechanical properties of iron processed by severe plastic deformation Metallurgical and Materials Transactions A. 34: 71-83. DOI: 10.1007/S11661-003-0209-7  0.442
2003 Zhou F, Nutt SR, Bampton CC, Lavernia EJ. Nanostructure in an Al-Mg-Sc alloy processed by low-energy ball milling at cryogenic temperature Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 1985-1992. DOI: 10.1007/S11661-003-0163-4  0.538
2003 He J, Chung KH, Lavernia EJ, Liao X, Zhu YT. Mechanical milling-induced deformation twinning in Fcc materials with high stacking fault energy Metallurgical and Materials Transactions A. 34: 707-712. DOI: 10.1007/S11661-003-0106-0  0.306
2003 Han BQ, Lee Z, Nutt SR, Lavernia EJ, Mohamed FA. Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 603-613. DOI: 10.1007/S11661-003-0095-Z  0.552
2003 Witkin D, Lavernia EJ. Processing-Controlled Mechanical Properties and Microstructures of Bulk Cryomilled Aluminum-Magnesium Alloys Processing and Properties of Structural Nanomaterial: Proceedings of Symposia Held At the Materials Science and Technology 2003 Meeting. 117-124.  0.467
2003 Zhang Z, Witkin D, Lavernia EJ. Crystallization Behavior Of An Amorphous Al 85Ni 10La 5 Alloy Processing and Properties of Structural Nanomaterial: Proceedings of Symposia Held At the Materials Science and Technology 2003 Meeting. 205-212.  0.339
2002 Zhou F, Chou YT, Lavernia EJ. Decomposition and thermodynamic property of metastable Fe–Zn solid solutions produced by mechanical alloying Journal of Materials Research. 17: 3230-3236. DOI: 10.1557/Jmr.2002.0467  0.38
2002 Lau ML, He J, Melmed AJ, Lusby TA, Schweinfest R, Rühle M, Lavernia EJ. Microstructural evolution in nanocrystalline Ni coatings Journal of Materials Research. 17: 1041-1049. DOI: 10.1557/Jmr.2002.0154  0.45
2002 Armster SQ, Delplanque J-, Rein M, Lavernia EJ. Thermo–fluid mechanisms controlling droplet based materials processes International Materials Reviews. 47: 265-301. DOI: 10.1179/174328013X13789822110946  0.337
2002 Ünlü N, Genç A, Öveçoǧlu ML, Lavernia EJ, Froes FH. Microstructural evolution during annealing of the melt-spun ternary hypoeutectic Al–7.6Si–3.3Fe (in wt.%) alloy Journal of Alloys and Compounds. 343: 223-233. DOI: 10.1016/S0925-8388(02)00284-0  0.44
2002 Wu F, Bellon P, Lau ML, Lavernia EJ, Lusby TA, Melmed AJ. A new approach to preparing tips for atom probe field ion microscopy from powder materials Materials Science and Engineering A. 327: 20-23. DOI: 10.1016/S0921-5093(01)01884-6  0.376
2002 Ajdelsztajn L, Chung K, Lavernia EJ, Lee J, Bastian FL. Synthesis and nanoindentation study of high-velocity oxygen fuel thermal-sprayed nanocrystalline and near-nanocrystalline Ni coatings Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 33: 647-655. DOI: 10.1007/S11661-002-0126-1  0.417
2002 Liu Y, Qiao Y, Fischer TE, He J, Lavernia EJ. Near-nanostructured WC-18 pct Co coatings with low amounts of non-WC carbide phase: Part II. Hardness and resistance to sliding and abrasive wear Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 33: 159-164. DOI: 10.1007/S11661-002-0014-8  0.342
2002 He J, Lavernia EJ, Liu Y, Qiao Y, Fischer TE. Near-nanostructured WC-18 Pct Co coatings with low amounts of non-WC carbide phase: Part I. Synthesis and characterization Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 33: 145-157. DOI: 10.1007/S11661-002-0013-9  0.352
2002 Chung KH, Rodriguez R, Lavernia EJ, Lee J. Grain growth behavior of cryomilled INCONEL 625 powder during isothermal heat treatment Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 33: 125-134. DOI: 10.1007/S11661-002-0011-Y  0.518
2002 Wei W, Zhou Y, Lavernia EJ. Spray Formed Al MMCs via In‐situ Reactions Advanced Engineering Materials. 4: 853-858. DOI: 10.1002/1527-2648(20021105)4:11<853::Aid-Adem853>3.0.Co;2-O  0.431
2002 Zhou F, Rodriguez R, Lavernia EJ. Thermally stable nanocrystalline Al-Mg alloy powders produced by cryomilling Materials Science Forum. 386: 409-414.  0.4
2001 Zhou F, Chou YT, Lavernia EJ. Formation of supersaturated single-phase bcc solid solutions in Fe-Zn binary system by mechanical alloying Materials Transactions. 42: 1566-1570. DOI: 10.2320/Matertrans.42.1566  0.365
2001 Zhou F, Lee J, Dallek S, Lavernia EJ. High grain size stability of nanocrystalline Al prepared by mechanical attrition Journal of Materials Research. 16: 3451-3458. DOI: 10.1557/Jmr.2001.0474  0.45
2001 He J, Lavernia EJ. Development of nanocrystalline structure during cryomilling of Inconel 625 Journal of Materials Research. 16: 2724-2732. DOI: 10.1557/Jmr.2001.0372  0.514
2001 Tellkamp VL, Dallek S, Cheng D, Lavernia EJ. Grain growth behavior of a nanostructured 5083 Al–Mg alloy Journal of Materials Research. 16: 938-944. DOI: 10.1557/Jmr.2001.0133  0.503
2001 He J, Ajdelsztajn L, Lavernia EJ. Thermal stability of nanocrystalline WC-Co powder synthesized by using mechanical milling at low temperature Journal of Materials Research. 16: 478-488. DOI: 10.1557/Jmr.2001.0071  0.367
2001 He J, Ice M, Lavernia E. Particle melting behavior during high-velocity oxygen fuel thermal spraying Journal of Thermal Spray Technology. 10: 83-93. DOI: 10.1361/105996301770349547  0.342
2001 He J, Ice M, Schoenung JM, Shin DH, Lavernia EJ. Thermal Stability of Nanostructured Cr3C2-NiCr Coatings Journal of Thermal Spray Technology. 10: 293-300. DOI: 10.1361/105996301770349385  0.32
2001 He J, Zhou F, Chang G, Lavernia EJ. Influence of mechanical milling on microstructure of 49Fe-49Co-2V soft magnetic alloy Journal of Materials Science. 36: 2955-2964. DOI: 10.1023/A:1017910705656  0.464
2001 Shin J, Lee Z, Lee T, Lavernia EJ. The effect of casting method and heat treating condition on cold workability of high-Si electrical steel Scripta Materialia. 45: 725-731. DOI: 10.1016/S1359-6462(01)01086-7  0.319
2001 Xu Q, Hayes RW, Lavernia EJ. Creep properties of ball-milled and HIPed pure tantalum Scripta Materialia. 45: 447-454. DOI: 10.1016/S1359-6462(01)01044-2  0.426
2001 Zhou F, Lee J, Lavernia EJ. Grain growth kinetics of a mechanically milled nanocrystalline Al Scripta Materialia. 44: 2013-2017. DOI: 10.1016/S1359-6462(01)00826-0  0.476
2001 Hayes RW, Rodriguez R, Lavernia EJ. The mechanical behavior of a cryomilled Al-10Ti-2Cu alloy Acta Materialia. 49: 4055-4068. DOI: 10.1016/S1359-6454(01)00278-6  0.537
2001 Xu Q, Lavernia EJ. Influence of nucleation and growth phenomena on microstructural evolution during droplet-based deposition Acta Materialia. 49: 3849-3861. DOI: 10.1016/S1359-6454(01)00253-1  0.406
2001 Shin DH, Kim Y-, Lavernia EJ. Formation of fine cementite precipitates by static annealing of equal-channel angular pressed low-carbon steels Acta Materialia. 49: 2387-2393. DOI: 10.1016/S1359-6454(01)00165-3  0.405
2001 Yu J, Shin J, Bae J, Lee Z, Lee TD, Lee H, Lavernia E. The effect of heat treatments and Si contents on B2 ordering reaction in high-silicon steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 307: 29-34. DOI: 10.1016/S0921-5093(00)01960-2  0.319
2001 He J, Lavernia EJ. Precipitation phenomenon in nanostructured Cr3C2 - NiCr coatings Materials Science and Engineering A. 301: 69-79. DOI: 10.1016/S0921-5093(00)01383-6  0.318
2001 Hu HM, Lavernia EJ, Harrigan WC, Kajuch J, Nutt SR. Microstructural investigation on B4C/Al-7093 composite Materials Science and Engineering A. 297: 94-104. DOI: 10.1016/S0921-5093(00)01254-5  0.431
2001 Parker FT, Spada FE, Berkowitz AE, Vecchio KS, Lavernia EJ, Rodriguez R. Thick amorphous ferromagnetic coatings via thermal spraying of spark-eroded powder Materials Letters. 48: 184-187. DOI: 10.1016/S0167-577X(00)00300-1  0.353
2001 Cheng D, Xu Q, Lavernia EJ, Trapaga G. The effect of particle size and morphology on the in-flight behavior of particles during high-velocity oxyfuel thermal spraying Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 32: 525-535. DOI: 10.1007/S11663-001-0037-3  0.301
2001 Tellkamp VL, Melmed A, Lavernia EJ. Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 2335-2343. DOI: 10.1007/S11661-001-0207-6  0.566
2001 Lee J, Zhou F, Chung KH, Lavernia EJ, Kim NJ. Grain growth of nanocrystalline Ni powders prepared by cryomilling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 32: 3109-3115. DOI: 10.1007/S11661-001-0185-8  0.467
2001 He J, Lavernia EJ. Microstructural evolution in cryomilled Inconel 625 Materials Research Society Symposium - Proceedings. 634.  0.393
2001 Lee J, Ajdelsztajn L, Kim NJ, Lavernia EJ. Reactive HVOF Thermal Spraying of Nanocrystalline Ni Powders Proceedings of the International Thermal Spray Conference. 511-517.  0.317
2000 He J, Ice M, Lavernia EJ. Thermal stability of nanostructured Cr3C2-NiCr coatings Materials Science Forum. 343. DOI: 10.4028/Www.Scientific.Net/Msf.343-346.261  0.301
2000 Dai S, Delplanque JP, Lavernia EJ. Reactive spray deposited and thermomechanically processed Al-Mg-Mn alloys Materials Science Forum. 331. DOI: 10.4028/Www.Scientific.Net/Msf.331-337.461  0.715
2000 Hayes RW, Tellkamp V, Lavernia EJ. Creep behavior of a cryomilled ultrafine-grained Al-4% Mg alloy Journal of Materials Research. 15: 2215-2222. DOI: 10.1557/Jmr.2000.0318  0.523
2000 Delplanque JP, Lavernia EJ, Rangel RH. Analysis of in-flight oxidation during reactive spray atomization and deposition processing of aluminum Journal of Heat Transfer. 122: 126-133. DOI: 10.1115/1.521443  0.637
2000 Zhou Y, Jihong LI, Nutt S, Lavernia EJ. Spray forming of ultra-fine SiC particle reinforced 5182 Al-Mg Journal of Materials Science. 35: 4015-4023. DOI: 10.1023/A:1004873918432  0.408
2000 Xu Q, Gupta VV, Lavernia EJ. Thermal behavior during droplet-based deposition Acta Materialia. 48: 835-849. DOI: 10.1016/S1359-6454(99)00389-4  0.34
2000 Armster SQ, Lavernia EJ, Delplanque JP, Lai WHL. Monosize droplet deposition as a means to investigate droplet behavior during spray deposition Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 31: 1333-1344. DOI: 10.1007/S11663-000-0020-4  0.315
2000 Yang N, Robinson S, Li B, Lavernia EJ. Solute segregation behavior in spray-atomized Pd-Rh-V(Co) powders Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 1843-1855. DOI: 10.1007/S11661-006-0244-2  0.362
2000 He J, Ice M, Lavernia EJ. Synthesis of nanostructured Cr3C2-25(Ni20Cr) coatings Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 555-564. DOI: 10.1007/S11661-000-0290-0  0.352
2000 He J, Ice M, Dallek S, Lavernia EJ. Synthesis of Nanostructured WC-12 Pet Co Coating Using Mechanical Milling and High Velocity Oxygen Fuel Thermal Spraying Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 541-553. DOI: 10.1007/S11661-000-0289-6  0.394
2000 Li B, Lavernia EJ. Particulate penetration into solid droplets Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 387-396. DOI: 10.1007/S11661-000-0275-Z  0.378
2000 Li B, Yang N, Robinson S, Lavernia EJ. Factors influencing solute segregation of spray-atomized palladium alloy powders Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 2681-2686. DOI: 10.1007/S11661-000-0216-X  0.419
2000 Del Castillo L, Lavernia EJ. Microstructure and mechanical behavior of spray-deposited Al-Cu-Mg(-Ag-Mn) alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 2287-2298. DOI: 10.1007/S11661-000-0145-8  0.48
2000 Hu H, Lavernia EJ, Lee ZH, White DR. On the evolution of porosity in spray-deposited tool steels Metallurgical and Materials Transactions A. 31: 725-735. DOI: 10.1007/S11661-000-0014-5  0.36
2000 Lin YJ, Lavernia EJ, Bobrow JE, White DR. Modeling of Spray-Formed Materials: Geometrical Considerations Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 2917-2929. DOI: 10.1007/Bf02830347  0.301
2000 Zhou F, Chung KH, Lavernia EJ. Processing of nanocrystalline al-based materials by mechanical attrition in liquid nitrogen Proceedings of the Tms Fall Meeting. 167-177.  0.412
1999 He J, Ice M, Lavernia EJ. Synthesis and processing of nanostructured Cr3C2-NiCr coatings using mechanical milling and HVOF Materials Science Forum. 312: 237-246. DOI: 10.4028/Www.Scientific.Net/Msf.312-314.237  0.394
1999 Dai SL, Delplanque JP, Lavernia EJ. Effect of secondary phase particles on postrecrystallization grain growth in reactive spray deposited 5083 Al alloys Journal of Materials Research. 14: 2814-2823. DOI: 10.1557/Jmr.1999.0376  0.465
1999 Zhou Y, Juarez-Islas JA, Alvarez-Fregoso O, Yoon WY, Lavernia EJ. Microstructural Characterization And Solidification Behavior Of Atomized Al-Fe Powders Journal of Materials Research. 14: 729-736. DOI: 10.1557/Jmr.1999.0098  0.423
1999 Jiang HG, Rühle M, Lavernia EJ. On the applicability of the x-ray diffraction line profile analysis in extracting grain size and microstrain in nanocrystalline materials Journal of Materials Research. 14: 549-559. DOI: 10.1557/Jmr.1999.0079  0.435
1999 Srivatsan TS, Castillo LD, Ravi BG, Al-Hajri M, Lavernia EJ. Microstructure and Mechanical Properties of A Spray-Atomized and Deposited Al-Cu-Mg-Ag Alloy Journal of Materials Synthesis and Processing. 7: 365-372. DOI: 10.1023/A:1021865930137  0.5
1999 Hayes R, Tellkamp V, Lavernia E. A preliminary creep study of a bulk nanocrystalline Al-Mg alloy Scripta Materialia. 41: 743-748. DOI: 10.1016/S1359-6462(99)00210-9  0.448
1999 Xu Q, Lavernia EJ. Microstructural evolution during the initial stages of spray atomization and deposition Scripta Materialia. 41: 535-540. DOI: 10.1016/S1359-6462(99)00147-5  0.472
1999 Lin Z, Lavernia EJ, Mohamed FA. High-temperature deformation in a Ta-W alloy Acta Materialia. 47: 1181-1194. DOI: 10.1016/S1359-6454(98)00434-0  0.413
1999 Lau ML, Gupta VV, Lavernia EJ. Particle behavior of nanocrystalline 316-stainless steel during high velocity oxy-fuel thermal spray Nanostructured Materials. 12: 319-322. DOI: 10.1016/S0965-9773(99)00126-9  0.415
1999 Tellkamp VL, Lavernia EJ. Processing and mechanical properties of nanocrystalline 5083 Al alloy Nanostructured Materials. 12: 249-252. DOI: 10.1016/S0965-9773(99)00110-5  0.543
1999 Huang B, Jiang HG, Perez RJ, Nutt SR, Lavernia EJ. Effect of Ni on the cryogenic attritor milling of Metglas Fe78B13Si9 Nanostructured Materials. 11: 1009-1016. DOI: 10.1016/S0965-9773(00)00428-1  0.351
1999 Lau ML, Lavernia EJ. Microstructural evolution and oxidation behavior of nanocrystalline 316-stainless steel coatings produced by high-velocity oxygen fuel spraying Materials Science and Engineering A. 272: 222-229. DOI: 10.1016/S0921-5093(99)00476-1  0.393
1999 Bystritskii V, Garate E, Earthman J, Kharlov A, Lavernia E, Peng X. Fatigue properties of 2024-T3, 7075-T6 aluminum alloys modified using plasma-enhanced ion beams Theoretical and Applied Fracture Mechanics. 32: 47-53. DOI: 10.1016/S0167-8442(99)00025-7  0.432
1999 Xu Q, Gupta VV, Lavernia EJ. On the mechanism of mushy layer formation during droplet-based processing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 527-539. DOI: 10.1007/S11663-999-0086-6  0.335
1999 Castillo LD, Wu Y, Hu HM, Lavernia EJ. Microstructure and mechanical behavior of spray-deposited high-Li Al-Li alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 30: 1381-1389. DOI: 10.1007/S11661-999-0286-3  0.514
1999 Lee ZH, Hu H, Lavernia EJ, White DR. The mechanism of porous column formation during spray forming Metallurgical and Materials Transactions A. 30: 1679-1682. DOI: 10.1007/S11661-999-0107-8  0.314
1998 Amaya M, Lavernia EJ, Martinez L. High Temperature Corrosion of Spray-Atomized FeAl (40at.%) Based Alloys:Immersed in a Molten Salt Mixture of V 2 O 5 -Na 2 SO 4 Mrs Proceedings. 552. DOI: 10.1557/Proc-552-Kk4.9.1  0.38
1998 Lawrynowicz D, Liang X, Srivatsan TS, Lavernia EJ. Processing, microstructure and fracture behaviour of a spray-atomized and deposited nickel aluminide intermetallic Journal of Materials Science. 33: 1661-1675. DOI: 10.1023/A:1017588425752  0.43
1998 Juarez-Islas JA, Campillo B, Perez R, Su S, Lavernia EJ. Characterization of a solid solution of Cu in Al—Cu—SiCp metal matrix composites processed by spray atomization and co-deposition Journal of Materials Science. 33: 259-263. DOI: 10.1023/A:1004343007322  0.404
1998 Dai SL, Delplanque J-, Lavernia EJ. Grain growth in reactive spray deposited 5083 alloys Scripta Materialia. 40: 145-151. DOI: 10.1016/S1359-6462(98)00412-6  0.509
1998 Xu Q, Hayes RW, Hunt WH, Lavernia EJ. Mechanical properties and fracture behavior of layered 6061/SiCp composites produced by spray atomization and co-deposition Acta Materialia. 47: 43-53. DOI: 10.1016/S1359-6454(98)00340-1  0.312
1998 He J, Ice M, Lavernia EJ. Synthesis and characterization of nanostructured Cr3C2-NiCr Nanostructured Materials. 10: 1271-1283. DOI: 10.1016/S0965-9773(99)00010-0  0.433
1998 Lau ML, Gupta VV, Lavernia EJ. Mathematical modeling of particle behavior of nanocrystalline Ni during high velocity oxy-fuel thermal spray Nanostructured Materials. 10: 715-722. DOI: 10.1016/S0965-9773(98)00109-3  0.419
1998 Jiang HG, Lau ML, Lavernia EJ. Grain growth behavior of nanocrystalline Inconel 718 and Ni powders and coatings Nanostructured Materials. 10: 169-178. DOI: 10.1016/S0965-9773(98)00058-0  0.486
1998 Martinez L, Amaya M, Porcayo-Calderon J, Lavernia EJ. High-temperature electrochemical testing of spray atomized and deposited iron aluminides alloyed with boron and reinforced with alumina particulate Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 258: 306-312. DOI: 10.1016/S0921-5093(98)00949-6  0.357
1998 Huang B, Perez RJ, Lavernia EJ. Grain growth of nanocrystalline Fe-Al alloys produced by cryomilling in liquid argon and nitrogen Materials Science and Engineering A. 255: 124-132. DOI: 10.1016/S0921-5093(98)00765-5  0.391
1998 Cai WD, Smugeresky J, Lavernia EJ. Low-pressure spray forming of 2024 aluminum alloy Materials Science and Engineering A. 241: 60-71. DOI: 10.1016/S0921-5093(97)00477-2  0.416
1998 Berndt CC, Lavernia EJ. Thermal spray processing of nanoscale materials—A conference report with extended abstract Journal of Thermal Spray Technology. 7: 411-440. DOI: 10.1007/S11666-998-0058-4  0.369
1998 Lavernia EJ, Kabacoff L. Thermal spray processing of nanostructured materials Journal of Thermal Spray Technology. 7: 291-291. DOI: 10.1007/S11666-998-0053-9  0.328
1998 Zhou Y, Lee S, McDonell VG, Samuelson S, Lavernia EJ, Kozarek RL. Characterization of spray atomization of 3003 aluminum alloy during linear spray atomization and deposition Metallurgical and Materials Transactions B. 29: 793-806. DOI: 10.1007/S11663-998-0138-3  0.346
1998 Cai W, Lavernia EJ. Modeling of porosity during spray forming part II. Effects of atomization gas chemistry and alloy compositions Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 29: 1097-1106. DOI: 10.1007/S11663-998-0079-X  0.415
1998 Cai W, Lavernia EJ. Modeling of porosity during spray forming part I. Effects of processing parameters Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 29: 1085-1096. DOI: 10.1007/S11663-998-0078-Y  0.378
1998 Dai SL, Delplanque JP, Lavernia EJ. Microstructural characteristics of 5083 Al alloys processed by reactive spray deposition for net-shape manufacturing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 29: 2597-2611. DOI: 10.1007/S11661-998-0232-9  0.46
1998 Perez RJ, Jiang HG, Lavernia EJ, Dogan CP. Grain growth of nanocrystalline cryomilled Fe-Al powders Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 29: 2469-2475. DOI: 10.1007/S11661-998-0218-7  0.449
1997 Wu Y, Lavernia EJ. Spray synthesis of superplastic materials for near-net-shape manufacturing Atomization and Sprays. 7: 115-122. DOI: 10.1615/Atomizspr.V7.I1.60  0.536
1997 Jiang HG, Perez RJ, Lau ML, Lavernia EJ. Formation kinetics of nanocrystalline Fe-4 wt. Al solid solution during ball milling Journal of Materials Research. 12: 1429-1432. DOI: 10.1557/Jmr.1997.0194  0.337
1997 Anand S, Srivatsan TS, Wu Y, Lavernia EJ. Processing, microstructure and fracture behaviour of a spray atomized and deposited aluminium-silicon alloy Journal of Materials Science. 32: 2835-2848. DOI: 10.1023/A:1018668332318  0.492
1997 Dai SL, Wu Y, Castillo LD, Lavernia EJ. Microstructure and properties of spray deposited high Li Al-Li-Mg-Ge-Zr alloys Scripta Materialia. 37: 265-270. DOI: 10.1016/S1359-6462(97)00116-4  0.47
1997 Ho S, Lavernia EJ. The effect of heat transfer coefficient on thermal residual stresses in spray deposited materials Scripta Materialia. 36: 283-290. DOI: 10.1016/S1359-6462(96)00389-2  0.345
1997 Li B, Lavernia EJ. Spray forming and co-injection of particulate reinforced TiAl/TiB2 composites Acta Materialia. 45: 5015-5030. DOI: 10.1016/S1359-6454(97)00172-9  0.463
1997 Delplanque J-, Cai WD, Rangel RH, Lavernia EJ. Spray atomization and deposition of tantalum alloys Acta Materialia. 45: 5233-5243. DOI: 10.1016/S1359-6454(97)00166-3  0.431
1997 Tellkamp VL, Lau ML, Fabel A, Lavernia EJ. Thermal spraying of nanocrystalline inconel 718 Nanostructured Materials. 9: 489-492. DOI: 10.1016/S0965-9773(97)00107-4  0.43
1997 Lau ML, Jiang HG, Perez RJ, Juarez-Islas J, Lavernia EJ. Synthesis and characterization of bulk nanocrystalline M50 steel by cryomilling Nanostructured Materials. 9: 157-160. DOI: 10.1016/S0965-9773(97)00042-1  0.43
1997 Perez RJ, Jiang HG, Lavernia EJ. Grain size stability of nanocrystalline cryomilled Fe-3wt.%Al alloy Nanostructured Materials. 9: 71-74. DOI: 10.1016/S0965-9773(97)00021-4  0.475
1997 Lim SC, Gupta M, Leng YF, Lavernia EJ. Wear of a spray-deposited hypereutectic aluminium-silicon alloy Journal of Materials Processing Technology. 63: 865-870. DOI: 10.1016/S0924-0136(96)02740-9  0.461
1997 Li B, Nordstrom N, Lavernia EJ. Spray forming of Zircaloy-4 Materials Science and Engineering A. 237: 207-215. DOI: 10.1016/S0921-5093(97)00291-8  0.457
1997 Lawrynowicz DE, Wolfenstine J, Lavernia EJ. Grain growth mechanisms in a spray-formed Ni3Al/Al2O3 composite in the presence of a liquid phase Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 230: 1-13. DOI: 10.1016/S0921-5093(97)00017-8  0.453
1997 Cai WD, Lavernia EJ. Modeling of porosity during spray forming Materials Science and Engineering A. 226: 8-12. DOI: 10.1016/S0921-5093(96)10580-3  0.356
1997 Hsieh T, Choe H, Lavernia EJ, Wolfenstine J. The effect of Si3N4 on the thermal expansion behavior of MoSi2 Materials Letters. 30: 407-410. DOI: 10.1016/S0167-577X(96)00226-1  0.373
1997 Srivatsan TS, Anand S, Wu Y, Lavernia EJ. The fatigue response and fracture behavior of a spray atomized and deposited aluminum-silicon alloy Journal of Materials Engineering and Performance. 6: 654-663. DOI: 10.1007/S11665-997-0060-X  0.447
1997 Ho S, Lavernia EJ. Investigation of thermal residual stresses in layered composite using the finite element method and X-ray diffraction Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 28: 969-978. DOI: 10.1007/S11663-997-0050-2  0.347
1997 Wu Y, Del Castillo L, Lavernia EJ. Superplastic behavior of spray-deposited 5083 Al Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 1059-1068. DOI: 10.1007/S11661-997-0235-Y  0.507
1997 Li B, Wolfenstine J, Earthman JC, Lavernia EJ. Compressive creep behavior of spray-formed gamma titanium aluminide Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 1849-1857. DOI: 10.1007/S11661-997-0115-5  0.455
1997 Li B, Lavernia EJ. Spray forming and co-injection of particulate reinforced TiAl/TiB2 composites Acta Materialia. 45: 5015-5030.  0.359
1997 Estrada JL, Nicolas E, Lavernia EJ. Microstructure analysis of the Al-12w/oSi alloy and the Al-12w/oSi/SiC MMC processed by atomization and deposition Advances in Powder Metallurgy and Particulate Materials. 1: 2-51.  0.444
1997 Zhang J, Perez RJ, Lavernia EJ. Damping behavior of 6061Al/SiC/Gr spray-deposited composites Astm Special Technical Publication. 1304: 313-330.  0.346
1997 Lawrynowicz DE, Wolfenstine J, Lavernia EJ. Grain growth mechanisms in a spray-formed Ni3Al/Al2O3 composite in the presence of a liquid phase Materials Science and Engineering A. 230: 1-13.  0.307
1996 Jiang HG, Perez RJ, Lau ML, Lavernia EJ. Structural evolution of Fe rich Fe-Al alloys during ball milling and subsequent heat treatment Mrs Proceedings. 457: 297. DOI: 10.1557/Proc-457-297  0.347
1996 Perez RJ, Huang B, Lavernia EJ. Effect of in-situ formation of nanoscale γ-Al2O3 and AlN on thermal stability of cryomilled nanocrystalline Fe Materials Research Society Symposium - Proceedings. 400: 31-36. DOI: 10.1557/Proc-400-31  0.364
1996 Lau ML, Jiang HG, Perez RJ, Juarez-Islas J, Lavernia EJ. Synthesis of nanocrystalline M50 steel powders by cryomilling Nanostructured Materials. 7: 847-856. DOI: 10.1016/S0965-9773(96)00056-6  0.432
1996 Ho S, Lavernia EJ. The effect of ceramic reinforcement on residual stresses during spray atomization and co-deposition of metal matrix composites Scripta Materialia. 34: 1911-1918. DOI: 10.1016/1359-6462(96)00080-2  0.334
1996 Wu Y, Del Castillo L, Lavernia EJ. Superplasticity of 5083 alloys produced by spray deposition Scripta Materialia. 34: 1243-1249. DOI: 10.1016/1359-6462(95)00652-4  0.525
1996 Ho S, Lavernia EJ. Thermal residual stresses in spray atomized and deposited Ni3Al Scripta Materialia. 34: 527-536. DOI: 10.1016/1359-6462(95)00556-0  0.355
1996 Zhang Q, Rangel RH, Lavernia EJ. Nucleation phenomena during co-injection of ceramic particulates into atomized metal droplets Acta Materialia. 44: 3693-3703. DOI: 10.1016/1359-6454(95)00449-1  0.36
1996 Li B, Liang X, Earthman JC, Lavernia EJ. Two dimensional modeling of momentum and thermal behavior during spray atomization of γ-tial Acta Materialia. 44: 2409-2420. DOI: 10.1016/1359-6454(95)00335-5  0.327
1996 Perez RJ, Huang B, Lavernia EJ. Thermal Stability of Nanocrystalline Fe-10 wt.% Al Produced by Cryogenic Mechanical Alloying Nanostructured Materials. 7: 565-572. DOI: 10.1016/0965-9773(96)00020-7  0.425
1996 Huang B-, Perez RJ, Lavernia EJ, Luton MJ. Formation of supersaturated solid solutions by mechanical alloying Nanostructured Materials. 7: 67-79. DOI: 10.1016/0965-9773(95)00299-5  0.466
1996 Perez RJ, Huang B-, Crawford PJ, Sharif AA, Lavernia EJ. Synthesis of nanocrystalline Fe-B-Si powders Nanostructured Materials. 7: 47-56. DOI: 10.1016/0965-9773(95)00295-2  0.361
1996 Huang B-, Perez RJ, Crawford PJ, Nutt SR, Lavernia EJ. The synthesis of nanocrystalline Fe78B13Si9 by cryogenic high-energy ball milling of metglas Nanostructured Materials. 7: 57-65. DOI: 10.1016/0965-9773(95)00294-4  0.347
1996 Liang X, Sickinger A, Wolfenstine J, Lavernia EJ. In-situ carburized coating produced by reactive plasma spraying of low carbon steel using methane Materials Science and Engineering A. 212: 51-61. DOI: 10.1016/0921-5093(96)10174-X  0.308
1996 Wu Y, Zeng X, Lavernia EJ, Schoenung JM. Reactive atomization of silicon to form in situ oxide sintering aids Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 27: 2115-2121. DOI: 10.1007/Bf02651866  0.374
1996 Huang B, Perez RJ, Lavernia EJ. Grain growth impediment of Fe-based nanocomposites during heat treatment at elevated temperature Materials Research Society Symposium - Proceedings. 400: 37-42.  0.318
1996 Li B, Cai W, Lavernia EJ. Spray forming of γ-titanium aluminide Journal of Materials Synthesis and Processing. 4: 35-41.  0.325
1995 Lavernia EJ, Zhang J, Perez RJ. Damping behavior and mechanisms in particulate reinforced metal matrix composites processed using spray atomization and deposition Key Engineering Materials. 104: 691-728. DOI: 10.4028/Www.Scientific.Net/Kem.104-107.691  0.49
1995 Gupta M, Lavernia EJ. Effect of preparation methods on the incorporation/distribution of ceramic particulates in metal based composite powders Materials Transactions, Jim. 36: 451-457. DOI: 10.2320/Matertrans1989.36.451  0.436
1995 Hayes RW, Jeng YL, Lavernia EJ, Wolfenstine J. Preliminary characterization of the room temperature fracture behavior of monolithic and composite FeAl3-Fe2Al5 Scripta Metallurgica Et Materiala. 32: 433-437. DOI: 10.1016/S0956-716X(99)80078-8  0.347
1995 Huang B, Perez RJ, Crawford PJ, Sharif AA, Nutt SR, Lavernia EJ. Mechanically induced crystallization of metglas Fe78B13Si9 during cryogenic high energy ball milling Nanostructured Materials. 5: 545-553. DOI: 10.1016/0965-9773(95)00261-C  0.324
1995 Tong HY, Shi FG, Lavernia EJ. Enhanced oxidation resistance of nanocrystalline FeBSi materials Scripta Metallurgica Et Materialia. 32: 511-516. DOI: 10.1016/0956-716X(95)90829-9  0.452
1995 Zeng X, Lavernia EJ, Schoenung JM. Solidification of spray atomized silicon droplets Scripta Metallurgica Et Materiala. 32: 1203-1208. DOI: 10.1016/0956-716X(95)00126-G  0.354
1995 Zeng X, Lavernia EJ. Creep behavior of dispersion-strengthened Ni3Al intermetallic processed using reactive atomization and deposition Scripta Metallurgica Et Materiala. 32: 991-996. DOI: 10.1016/0956-716X(95)00063-2  0.452
1995 Liu H, Lavernia EJ, Rangel RH. Modeling of molten droplet impingement on a non-flat surface Acta Metallurgica Et Materialia. 43: 2053-2072. DOI: 10.1016/0956-7151(94)00386-V  0.339
1995 Gupta M, Lavernia EJ. Effect of processing on the microstructural variation and heat-treatment response of a hypercutectic AlSi alloy Journal of Materials Processing Tech.. 54: 261-270. DOI: 10.1016/0924-0136(95)01797-6  0.333
1995 Perez RJ, Huang B, Crawford PJ, Sharif AA, Lavernia EJ. Synthesis of nanocrystalline Fe13at.%B7at.%Si by mechanical alloying Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 204: 217-221. DOI: 10.1016/0921-5093(95)09964-6  0.354
1995 Shin DH, Park K-, Lavernia EJ. High-temperature deformation in a superplastic 7475 Al alloy with a relatively large grain size Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 201: 118-126. DOI: 10.1016/0921-5093(95)09761-9  0.433
1995 Jeng Y-, Lavernia EJ, Hayes RM, Wolfenstine J. Creep behavior of Al-rich FeAl intermetallics Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 240-248. DOI: 10.1016/0921-5093(94)03255-6  0.397
1995 Srivatsan TS, Sudarshan TS, Lavernia EJ. Processing of discontinuously-reinforced metal matrix composites by rapid solidification Progress in Materials Science. 39: 317-409. DOI: 10.1016/0079-6425(95)00003-8  0.421
1995 Liu H, Lavernia EJ, Rangel RH. An analysis of freeze-up phenomena during gas atomization of metals International Journal of Heat and Mass Transfer. 38: 2183-2193. DOI: 10.1016/0017-9310(94)00345-V  0.42
1995 Wu Y, Cassada WA, Lavernia EJ. Microstructure and mechanical properties of spray-deposited Al-17Si-4.5Cu-0.6Mg wrought alloy Metallurgical and Materials Transactions A. 26: 1235-1247. DOI: 10.1007/Bf02670618  0.445
1995 Lavernia EJ, Perez RJ, Zhang J. Damping behavior of discontinuously reinforced ai alloy metal-matrix composites Metallurgical and Materials Transactions A. 26: 2803-2818. DOI: 10.1007/Bf02669639  0.448
1995 Zeng X, Nutt SR, Lavernia EJ. Microstructural characterization of Ni3Al processed by reactive atomization and deposition Metallurgical and Materials Transactions A. 26: 817-827. DOI: 10.1007/Bf02649079  0.461
1995 Liang X, Lavernia EJ, Wolfenstine J, Sickinger A. Microstructure evolution during reactive plasma spraying of MoSi2 with methane Journal of Thermal Spray Technology. 4: 252-260. DOI: 10.1007/Bf02646968  0.346
1995 Gupta M, Li Y, Wu Y, Lavernia EJ. DSC analysis of the effect of processing technique on the dissolution/precipitation reactions in a hypereutectic Al−Si alloy Journal of Thermal Analysis and Calorimetry. 44: 1321-1331. DOI: 10.1007/Bf02549221  0.432
1995 Yan SP, Mohamed FA, Lavernia EJ, Srivatsan TS. Influence of spray atomization and deposition processing on microstructure and mechanical behaviour of an aluminium alloy metal-matrix composite Journal of Materials Science. 30: 4726-4736. DOI: 10.1007/Bf01153085  0.49
1995 Gupta M, Lavernia EJ. Effect of atomization on the distribution of SiC particulates in spray deposited Al-7Si/SiC metal matrix composites Journal of Materials Science Letters. 14: 1543-1545. DOI: 10.1007/Bf00633156  0.353
1995 Lawrynowicz DE, Lavernia EJ. Sensors and techniques used to monitor processing parameters during spray atomization and deposition Journal of Materials Science. 30: 1125-1138. DOI: 10.1007/Bf00356110  0.308
1995 Huang BL, Lavernia EJ. Materials synthesis by mechanical alloying Journal of Materials Synthesis and Processing. 3: 1-10.  0.377
1995 Del Castillo L, Wu Y, Lavernia EJ. Microstructure and elevated temperature properties of 5083 Al-Mg alloy produced utilizing spray atomization and deposition Advances in Powder Metallurgy and Particulate Materials. 2.  0.452
1995 Zhang J, Wu Y, Zeng X, Lavernia EJ. Reactive atomization and deposition processing for enhanced damping capacity of an Al alloy Proceedings of the International Conference On Powder Metallurgy in Aerospace, Defense and Demanding Applications. 355-362.  0.377
Show low-probability matches.