Year |
Citation |
Score |
2017 |
Escalona Galvis LW, Diaz-Montiel P, Venkataraman S. Optimal Electrode Selection for Electrical Resistance Tomography in Carbon Fiber Reinforced Polymer Composites. Materials (Basel, Switzerland). 10. PMID 28772485 DOI: 10.3390/Ma10020125 |
0.319 |
|
2017 |
Escalona-Galvis LW, Diaz-Montiel P, Venkataraman S. Optimum Reduction of Electrodes Needed for Delamination Identification using Electrical Resistance Tomography Structural Health Monitoring-An International Journal. DOI: 10.12783/Shm2017/13902 |
0.323 |
|
2016 |
Escalona L, Díaz-Montiel P, Venkataraman S. Optimum electrode configuration selection for electrical resistance change based damage detection in composites using an effective independence measure Proceedings of Spie - the International Society For Optical Engineering. 9804. DOI: 10.1117/12.2219436 |
0.328 |
|
2012 |
Marhadi K, Venkataraman S, Pai SS. Quantifying uncertainty in statistical distribution of small sample data using Bayesian inference of unbounded Johnson distribution International Journal of Reliability and Safety. 6: 311-337. DOI: 10.1504/Ijrs.2012.049596 |
0.651 |
|
2011 |
Marhadi KS, Venkataraman S, Wong SA. Load redistribution mechanism in damage tolerant and redundant truss structure Structural and Multidisciplinary Optimization. 44: 213-233. DOI: 10.1007/S00158-011-0623-1 |
0.692 |
|
2009 |
Marhadi K, Venkataraman S. Comparison of Quantitative and Qualitative Information Provided by Different Structural Load Path Definitions International Journal For Simulation and Multidisciplinary Design Optimization. 3: 384-400. DOI: 10.1051/Ijsmdo/2009014 |
0.664 |
|
2009 |
Marhadi K, Venkataraman S. Surrogate measures to optimize structures for robust and predictable progressive failure Structural and Multidisciplinary Optimization. 39: 245-261. DOI: 10.1007/S00158-008-0326-4 |
0.68 |
|
2009 |
Salas P, Venkataraman S. Laminate optimization incorporating analysis and model parameter uncertainties for predictable failure Structural and Multidisciplinary Optimization. 37: 541-555. DOI: 10.1007/S00158-008-0259-Y |
0.394 |
|
2007 |
Venkataraman S, Salas P. Optimization of composite laminates for robust and predictable progressive failure response Aiaa Journal. 45: 1113-1125. DOI: 10.2514/1.22077 |
0.395 |
|
2007 |
Salas P, Venkataraman S. Controlling failure using structural fuses for predictable progressive failure of composite laminates Structural and Multidisciplinary Optimization. 34: 473-489. DOI: 10.1007/S00158-007-0109-3 |
0.457 |
|
2006 |
Venkataraman S. Reliability optimization using probabilistic sufficiency factor and correction response surface Engineering Optimization. 38: 671-685. DOI: 10.1080/03052150600711190 |
0.408 |
|
2004 |
Zhu H, Sankar BV, Haftka RT, Venkataraman S, Blosser M. Minimum Mass Design of Insulation Made of Functionally Graded Material Journal of Spacecraft and Rockets. 41: 467-469. DOI: 10.2514/1.1032 |
0.363 |
|
2004 |
Venkataraman S, Haftka RT. Structural optimization complexity: What has Moore's law done for us? Structural and Multidisciplinary Optimization. 28: 375-387. DOI: 10.1007/S00158-004-0415-Y |
0.391 |
|
2003 |
Venkataraman S, Lamberti L, Haftka RT, Johnson TF. Challenges in Comparing Numerical Solutions for Optimum Weights of Stiffened Shells Journal of Spacecraft and Rockets. 40: 183-192. DOI: 10.2514/2.3952 |
0.41 |
|
2003 |
Qu X, Haftka RT, Venkataraman S, Johnson TF. Deterministic and Reliability-Based Optimization of Composite Laminates for Cryogenic Environments Aiaa Journal. 41: 2029-2036. DOI: 10.2514/2.1893 |
0.391 |
|
2003 |
Huang J, Venkataraman S, Rapoff A, Haftka R. Optimization of axisymmetric elastic modulus distributions around a hole for increased strength Structural and Multidisciplinary Optimization. 25: 225-236. DOI: 10.1007/S00158-003-0293-8 |
0.427 |
|
2003 |
Venkataraman S, Haftka R, Rapoff A. Structural optimization using biological variables to help understand how bones design holes Structural and Multidisciplinary Optimization. 25: 19-34. DOI: 10.1007/S00158-002-0268-1 |
0.391 |
|
2003 |
Lamberti L, Venkataraman S, Haftka RT, Johnson TF. Preliminary design optimization of stiffened panels using approximate analysis models International Journal For Numerical Methods in Engineering. 57: 1351-1380. DOI: 10.1002/Nme.781 |
0.397 |
|
2001 |
Venkataraman S, Haftka RT, Johnson TF. Maximal Errors due to Use of Equivalent Properties for Sublaminates Aiaa Journal. 39: 296-302. DOI: 10.2514/2.1304 |
0.348 |
|
Show low-probability matches. |