Year |
Citation |
Score |
2020 |
Batalha RL, Batalha WC, Deng L, Gustmann T, Pauly S, Kiminami CS, Gargarella P. Processing a biocompatible Ti–35Nb–7Zr–5Ta alloy by selective laser melting Journal of Materials Research. 35: 1143-1153. DOI: 10.1557/Jmr.2020.90 |
0.719 |
|
2020 |
da Silva MR, Gargarella P, Plaine AH, Contieri RJ, Pauly S, Kühn U, Bolfarini C. Influence of the deformation rate on phase stability and mechanical properties of a Ti–29Nb–13Ta–4.6Zr–xO alloy analyzed by in situ high-energy X-ray diffraction during compression tests Journal of Materials Research. 35: 1777-1789. DOI: 10.1557/Jmr.2020.150 |
0.723 |
|
2020 |
Xue P, Huang Y, Pauly S, Jiang S, Guo S, Ning Z, Sun J. Long-term room-temperature aging treatment of a bulk metallic glass composite Journal of Alloys and Compounds. 820: 153165. DOI: 10.1016/J.Jallcom.2019.153165 |
0.467 |
|
2019 |
Escher B, Kaban I, Kühn U, Eckert J, Pauly S. Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites Journal of Alloys and Compounds. 790: 657-665. DOI: 10.1016/J.JALLCOM.2019.03.139 |
0.688 |
|
2019 |
Xue P, Huang Y, Pauly S, Jiang S, Guo S, Fan H, Ning Z, Cao F, Sun J. Quantitatively determining the martensitic transformation in a CuZr-based bulk metallic glass composite Journal of Alloys and Compounds. 782: 961-966. DOI: 10.1016/J.Jallcom.2018.12.238 |
0.456 |
|
2018 |
Sun HC, Ning ZL, Wang G, Liang WZ, Pauly S, Huang YJ, Guo S, Xue X, Sun JF. In-situ tensile testing of ZrCu-based metallic glass composites. Scientific Reports. 8: 4651. PMID 29545571 DOI: 10.1038/S41598-018-22925-2 |
0.459 |
|
2018 |
Zhang L, Zhang H, Ren X, Eckert J, Wang Y, Zhu Z, Gemming T, Pauly S. Amorphous martensite in β-Ti alloys. Nature Communications. 9: 506. PMID 29410411 DOI: 10.1038/S41467-018-02961-2 |
0.491 |
|
2018 |
Silva MRd, Gargarella P, Wolf W, Gustmann T, Kiminami CS, Pauly S, Eckert J, Bolfarini C. Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy Materials Research. 21. DOI: 10.1590/1980-5373-Mr-2017-1044 |
0.79 |
|
2018 |
Akash K, Mani Prabu S, Gustmann T, Jayachandran S, Pauly S, Palani I. Enhancing the life cycle behaviour of Cu-Al-Ni shape memory alloy bimorph by Mn addition Materials Letters. 226: 55-58. DOI: 10.1016/J.Matlet.2018.05.008 |
0.533 |
|
2018 |
Deng L, Wang S, Wang P, Kühn U, Pauly S. Selective laser melting of a Ti-based bulk metallic glass Materials Letters. 212: 346-349. DOI: 10.1016/J.Matlet.2017.10.130 |
0.524 |
|
2018 |
Gustmann T, Schwab H, Kühn U, Pauly S. Selective laser remelting of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy Materials & Design. 153: 129-138. DOI: 10.1016/J.Matdes.2018.05.010 |
0.539 |
|
2018 |
Song K, Han X, Pauly S, Qin Y, Kosiba K, Peng C, Gong J, Chen P, Wang L, Sarac B, Ketov S, Mühlbacher M, Spieckermann F, Kaban I, Eckert J. Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites Materials & Design. 139: 132-140. DOI: 10.1016/J.Matdes.2017.11.008 |
0.474 |
|
2018 |
Pauly S, Wang P, Kühn U, Kosiba K. Experimental determination of cooling rates in selectively laser-melted eutectic Al-33Cu Additive Manufacturing. 22: 753-757. DOI: 10.1016/J.Addma.2018.05.034 |
0.443 |
|
2017 |
Kosiba K, Pauly S. Inductive flash-annealing of bulk metallic glasses. Scientific Reports. 7: 2151. PMID 28526876 DOI: 10.1038/s41598-017-02376-x |
0.391 |
|
2017 |
Gammer C, Escher B, Ebner C, Minor AM, Karnthaler HP, Eckert J, Pauly S, Rentenberger C. Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass. Scientific Reports. 7: 44903. PMID 28322304 DOI: 10.1038/Srep44903 |
0.378 |
|
2017 |
Gargarella P, Pauly S, Kiminami CS, Eckert J. Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti–Cu-based alloys Journal of Materials Research. 32: 2578-2584. DOI: 10.1557/Jmr.2017.237 |
0.791 |
|
2017 |
Pauly S, Schricker C, Scudino S, Deng L, Kühn U. Processing a glass-forming Zr-based alloy by selective laser melting Materials & Design. 135: 133-141. DOI: 10.1016/J.MATDES.2017.08.070 |
0.635 |
|
2017 |
Zhang L, Zhang H, Li W, Gemming T, Wang P, Bönisch M, Şopu D, Eckert J, Pauly S. β-type Ti-based bulk metallic glass composites with tailored structural metastability Journal of Alloys and Compounds. 708: 972-981. DOI: 10.1016/J.Jallcom.2017.03.074 |
0.428 |
|
2017 |
Kosiba K, Scudino S, Kobold R, Kühn U, Greer A, Eckert J, Pauly S. Transient nucleation and microstructural design in flash-annealed bulk metallic glasses Acta Materialia. 127: 416-425. DOI: 10.1016/J.ACTAMAT.2017.01.059 |
0.602 |
|
2016 |
Peng CX, Song KK, Wang L, Şopu D, Pauly S, Eckert J. Correlation between structural heterogeneity and plastic deformation for phase separating FeCu metallic glasses. Scientific Reports. 6: 34340. PMID 27681052 DOI: 10.1038/Srep34340 |
0.76 |
|
2016 |
Sarac B, Zhang L, Kosiba K, Pauly S, Stoica M, Eckert J. Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses. Scientific Reports. 6: 27271. PMID 27273477 DOI: 10.1038/Srep27271 |
0.745 |
|
2016 |
Zhang L, Pauly S, Tang MQ, Eckert J, Zhang HF. Two-phase quasi-equilibrium in β-type Ti-based bulk metallic glass composites. Scientific Reports. 6: 19235. PMID 26754315 DOI: 10.1038/Srep19235 |
0.511 |
|
2016 |
Escher B, Kühn U, Eckert J, Rentenberger C, Pauly S. Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses Materials Science and Engineering: A. 673: 90-98. DOI: 10.1016/J.Msea.2016.06.081 |
0.757 |
|
2016 |
da Silva MR, Gargarella P, Gustmann T, Botta Filho WJ, Kiminami CS, Eckert J, Pauly S, Bolfarini C. Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy Materials Science and Engineering: A. 661: 61-67. DOI: 10.1016/J.Msea.2016.03.021 |
0.802 |
|
2016 |
Gargarella P, Pauly S, Khoshkhoo MS, Kiminami C, Kühn U, Eckert J. Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si Journal of Alloys and Compounds. 663: 531-539. DOI: 10.1016/J.Jallcom.2015.12.160 |
0.752 |
|
2016 |
Sun B, Song K, Pauly S, Gargarella P, Yi J, Wang G, Liu C, Eckert J, Yang Y. Transformation-mediated plasticity in CuZr based metallic glass composites: A quantitative mechanistic understanding International Journal of Plasticity. 85: 34-51. DOI: 10.1016/J.Ijplas.2016.06.004 |
0.748 |
|
2016 |
Tong X, Wang G, Yi J, Ren JL, Pauly S, Gao YL, Zhai QJ, Mattern N, Dahmen KA, Liaw PK, Eckert J. Shear avalanches in plastic deformation of a metallic glass composite International Journal of Plasticity. 77: 141-155. DOI: 10.1016/J.Ijplas.2015.10.006 |
0.449 |
|
2016 |
Gustmann T, Neves A, Kühn U, Gargarella P, Kiminami C, Bolfarini C, Eckert J, Pauly S. Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting Additive Manufacturing. 11: 23-31. DOI: 10.1016/J.Addma.2016.04.003 |
0.74 |
|
2015 |
Gargarella P, Kiminami CS, Mazzer EM, Cava RD, Basilio LA, Bolfarini C, Botta WJ, Eckert J, Gustmann T, Pauly S. Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting Materials Research. 18: 35-38. DOI: 10.1590/1516-1439.338914 |
0.778 |
|
2015 |
Gargarella P, Pauly S, Stoica M, Vaughan G, M. Afonso CR, Kühn U, Eckert J. Structural evolution in Ti-Cu-Ni metallic glasses during heating Apl Materials. 3: 016101. DOI: 10.1063/1.4905287 |
0.744 |
|
2015 |
Song KK, Wu DY, Pauly S, Peng CX, Wang L, Eckert J. Thermal stability of B2 CuZr phase, microstructural evolution and martensitic transformation in Cu-Zr-Ti alloys Intermetallics. 67: 177-184. DOI: 10.1016/j.intermet.2015.08.015 |
0.454 |
|
2014 |
Mazzer E, Kiminami CS, Gargarella P, Cava R, Basilio L, Bolfarini C, Botta W, Eckert J, Gustmann T, Pauly S. Atomization and Selective Laser Melting of a Cu-Al-Ni-Mn Shape Memory Alloy Materials Science Forum. 802: 343-348. DOI: 10.4028/Www.Scientific.Net/Msf.802.343 |
0.764 |
|
2014 |
Pauly S, Kosiba K, Gargarella P, Escher B, Song K, Wang G, Kühn U, Eckert J. Microstructural Evolution and Mechanical Behaviour of Metastable Cu–Zr–Co Alloys Journal of Materials Science & Technology. 30: 584-589. DOI: 10.1016/J.Jmst.2014.05.006 |
0.769 |
|
2014 |
Wang G, Pauly S, Gorantla S, Mattern N, Eckert J. Plastic Flow of a Cu50Zr45Ti5 Bulk Metallic Glass Composite Journal of Materials Science & Technology. 30: 609-615. DOI: 10.1016/J.Jmst.2014.05.003 |
0.478 |
|
2014 |
Gargarella P, Pauly S, Samadi Khoshkhoo M, Kühn U, Eckert J. Phase formation and mechanical properties of Ti–Cu–Ni–Zr bulk metallic glass composites Acta Materialia. 65: 259-269. DOI: 10.1016/J.Actamat.2013.10.068 |
0.789 |
|
2013 |
Okulov IV, Pauly S, Kühn U, Gargarella P, Marr T, Freudenberger J, Schultz L, Scharnweber J, Oertel CG, Skrotzki W, Eckert J. Effect of microstructure on the mechanical properties of as-cast Ti-Nb-Al-Cu-Ni alloys for biomedical application Materials Science and Engineering C. 33: 4795-4801. PMID 24094189 DOI: 10.1016/J.Msec.2013.07.042 |
0.768 |
|
2013 |
Qiao JW, Zhang T, Yang FQ, Liaw PK, Pauly S, Xu BS. A tensile deformation model for in-situ dendrite/metallic glass matrix composites. Scientific Reports. 3: 2816. PMID 24085187 DOI: 10.1038/Srep02816 |
0.417 |
|
2013 |
Sun BA, Pauly S, Hu J, Wang WH, Kühn U, Eckert J. Origin of intermittent plastic flow and instability of shear band sliding in bulk metallic glasses. Physical Review Letters. 110: 225501. PMID 23767733 DOI: 10.1103/Physrevlett.110.225501 |
0.347 |
|
2013 |
Kosiba K, Gargarella P, Pauly S, Kühn U, Eckert J. Predicted glass-forming ability of Cu-Zr-Co alloys and their crystallization behavior Journal of Applied Physics. 113: 123505. DOI: 10.1063/1.4798294 |
0.785 |
|
2013 |
Song KK, Pauly S, Sun BA, Tan J, Stoica M, Kühn U, Eckert J. Correlation between the microstructures and the deformation mechanisms of CuZr-based bulk metallic glass composites Aip Advances. 3: 012116. DOI: 10.1063/1.4789516 |
0.383 |
|
2013 |
Song K, Pauly S, Wang Z, Kühn U, Eckert J. Effect of TaW particles on the microstructure and mechanical properties of metastable Cu47.5Zr47.5Al5 alloys Materials Science and Engineering: A. 587: 372-380. DOI: 10.1016/J.Msea.2013.09.010 |
0.707 |
|
2013 |
Song K, Pauly S, Zhang Y, Sun B, He J, Ma G, Kühn U, Eckert J. Thermal stability and mechanical properties of Cu46Zr46Ag8 bulk metallic glass and its composites Materials Science and Engineering: A. 559: 711-718. DOI: 10.1016/J.MSEA.2012.09.013 |
0.324 |
|
2013 |
Pauly S, Löber L, Petters R, Stoica M, Scudino S, Kühn U, Eckert J. Processing metallic glasses by selective laser melting Materials Today. 16: 37-41. DOI: 10.1016/J.Mattod.2013.01.018 |
0.668 |
|
2013 |
Gargarella P, Pauly S, Song K, Hu J, Barekar N, Samadi Khoshkhoo M, Teresiak A, Wendrock H, Kühn U, Ruffing C, Kerscher E, Eckert J. Ti–Cu–Ni shape memory bulk metallic glass composites Acta Materialia. 61: 151-162. DOI: 10.1016/J.Actamat.2012.09.042 |
0.781 |
|
2012 |
Liu Z, Li R, Liu G, Song K, Pauly S, Zhang T, Eckert J. Pronounced ductility in CuZrAl ternary bulk metallic glass composites with optimized microstructure through melt adjustment Aip Advances. 2: 032176. DOI: 10.1063/1.4754853 |
0.581 |
|
2012 |
Song KK, Gargarella P, Pauly S, Ma GZ, Kühn U, Eckert J. Correlation between glass-forming ability, thermal stability, and crystallization kinetics of Cu-Zr-Ag metallic glasses Journal of Applied Physics. 112: 063503. DOI: 10.1063/1.4752263 |
0.731 |
|
2012 |
Zheng N, Qu RT, Pauly S, Calin M, Gemming T, Zhang ZF, Eckert J. Design of ductile bulk metallic glasses by adding “soft” atoms Applied Physics Letters. 100: 141901. DOI: 10.1063/1.3700721 |
0.501 |
|
2012 |
Song K, Pauly S, Sun B, Zhang Y, Tan J, Kühn U, Stoica M, Eckert J. Formation of Cu–Zr–Al–Er bulk metallic glass composites with enhanced deformability Intermetallics. 30: 132-138. DOI: 10.1016/J.INTERMET.2012.03.016 |
0.353 |
|
2012 |
Song K, Pauly S, Zhang Y, Li R, Gorantla S, Narayanan N, Kühn U, Gemming T, Eckert J. Triple yielding and deformation mechanisms in metastable Cu47.5Zr47.5Al5 composites Acta Materialia. 60: 6000-6012. DOI: 10.1016/J.Actamat.2012.07.015 |
0.559 |
|
2012 |
Sun B, Pauly S, Tan J, Stoica M, Wang W, Kühn U, Eckert J. Serrated flow and stick–slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass Acta Materialia. 60: 4160-4171. DOI: 10.1016/J.Actamat.2012.04.013 |
0.334 |
|
2011 |
Barekar N, Gargarella P, Song K, Pauly S, Kühn U, Eckert J. Effect of Al and Ag addition on phase formation, thermal stability, and mechanical properties of Cu–Zr-based bulk metallic glasses Journal of Materials Research. 26: 1702-1710. DOI: 10.1557/Jmr.2011.61 |
0.738 |
|
2011 |
Gargarella P, de Oliveira MF, Kiminami CS, Pauly S, Kühn U, Bolfarini C, Botta WJ, Eckert J. Prediction of good glass formers in the Al-Ni-La and Al-Ni-Gd systems using topological instability and electronegativity Journal of Applied Physics. 109: 093509. DOI: 10.1063/1.3563099 |
0.726 |
|
2011 |
Scudino S, Jerliu B, Pauly S, Surreddi K, Kühn U, Eckert J. Ductile bulk metallic glasses produced through designed heterogeneities Scripta Materialia. 65: 815-818. DOI: 10.1016/J.Scriptamat.2011.07.039 |
0.626 |
|
2011 |
Javid F, Mattern N, Pauly S, Eckert J. Martensitic transformation and thermal cycling effect in Cu–Co–Zr alloys Journal of Alloys and Compounds. 509: S334-S337. DOI: 10.1016/J.JALLCOM.2011.01.186 |
0.313 |
|
2011 |
Gargarella P, de Oliveira M, Kiminami C, Pauly S, Kühn U, Bolfarini C, Botta W, Eckert J. Predicting glass-forming compositions in the Al–La and Al–La–Ni systems Journal of Alloys and Compounds. 509: S170-S174. DOI: 10.1016/J.Jallcom.2010.12.111 |
0.68 |
|
2011 |
Song K, Pauly S, Zhang Y, Scudino S, Gargarella P, Surreddi K, Kühn U, Eckert J. Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass Intermetallics. 19: 1394-1398. DOI: 10.1016/J.Intermet.2011.05.001 |
0.79 |
|
2011 |
Song K, Pauly S, Zhang Y, Gargarella P, Li R, Barekar N, Kühn U, Stoica M, Eckert J. Strategy for pinpointing the formation of B2 CuZr in metastable CuZr-based shape memory alloys Acta Materialia. 59: 6620-6630. DOI: 10.1016/J.Actamat.2011.07.017 |
0.748 |
|
2011 |
Javid FA, Mattern N, Pauly S, Eckert J. Effect of Cobalt on Phase Formation, Microstructure, and Mechanical Properties of Cu50−xCoxZr50 (x = 2, 5, 10, 20 at. pct) Alloys Metallurgical and Materials Transactions A. 43: 2631-2636. DOI: 10.1007/s11661-011-0945-z |
0.415 |
|
2011 |
Xu W, Figueiredo RB, Wu X, Pauly S, Stoica M, Eckert J, Langdon TG, Xia K. Intrinsically ductile failure in a nanocrystalline beta titanium alloy Advanced Engineering Materials. 13: 1108-1113. DOI: 10.1002/Adem.201100116 |
0.681 |
|
2010 |
Pauly S, Gorantla S, Wang G, Kühn U, Eckert J. Transformation-mediated ductility in CuZr-based bulk metallic glasses. Nature Materials. 9: 473-7. PMID 20473286 DOI: 10.1038/Nmat2767 |
0.43 |
|
2010 |
Pauly S, Bednarčik J, Kühn U, Eckert J. Plastically deformable Cu–Zr intermetallics Scripta Materialia. 63: 336-338. DOI: 10.1016/J.Scriptamat.2010.04.034 |
0.51 |
|
2010 |
Barekar N, Pauly S, Kumar R, Kühn U, Dhindaw B, Eckert J. Structure–property relations in bulk metallic Cu–Zr–Al alloys Materials Science and Engineering: A. 527: 5867-5872. DOI: 10.1016/J.MSEA.2010.05.074 |
0.377 |
|
2010 |
Pauly S, Liu G, Gorantla S, Wang G, Kühn U, Kim D, Eckert J. Criteria for tensile plasticity in Cu–Zr–Al bulk metallic glasses Acta Materialia. 58: 4883-4890. DOI: 10.1016/J.Actamat.2010.05.026 |
0.478 |
|
2010 |
Antonysamy AA, Pauly S, Dhindaw BK, Eckert J. Influence of Superheat on Microstructure and Mechanical Properties of Ductile Cu47.5Zr47.5Al5 Bulk Metallic Glass-Matrix Composite Journal of Materials Engineering and Performance. 20: 1196-1205. DOI: 10.1007/S11665-010-9768-0 |
0.612 |
|
2010 |
Park JM, Wang G, Pauly S, Mattern N, Kim DH, Eckert J. Ductile Ti-Based Bulk Metallic Glasses with High Specific Strength Metallurgical and Materials Transactions A. 42: 1456-1462. DOI: 10.1007/S11661-010-0416-Y |
0.462 |
|
2010 |
Park JM, Pauly S, Mattern N, Kim DH, Kim KB, Eckert J. Microstructural Modulations Enhance the Mechanical Properties in Al-Cu-(Si, Ga) Ultrafine Composites Advanced Engineering Materials. 12: 1137-1141. DOI: 10.1002/Adem.201000155 |
0.541 |
|
2009 |
Wang G, Mattern N, Pauly S, Bednarčik J, Eckert J. Atomic structure evolution in bulk metallic glass under compressive stress Applied Physics Letters. 95: 251906. DOI: 10.1063/1.3276274 |
0.312 |
|
2009 |
Pauly S, Lee MH, Kim DH, Kim KB, Sordelet DJ, Eckert J. Crack evolution in bulk metallic glasses Journal of Applied Physics. 106. DOI: 10.1063/1.3259418 |
0.395 |
|
2009 |
Pauly S, Liu G, Wang G, Das J, Kim KB, Kühn U, Kim DH, Eckert J. Modeling deformation behavior of Cu–Zr–Al bulk metallic glass matrix composites Applied Physics Letters. 95: 101906. DOI: 10.1063/1.3222973 |
0.568 |
|
2009 |
PAULY S, DAS J, BEDNARCIK J, MATTERN N, KIM K, KIM D, ECKERT J. Deformation-induced martensitic transformation in Cu–Zr–(Al,Ti) bulk metallic glass composites Scripta Materialia. 60: 431-434. DOI: 10.1016/J.Scriptamat.2008.11.015 |
0.521 |
|
2009 |
Das J, Pauly S, Boström M, Durst K, Göken M, Eckert J. Designing bulk metallic glass and glass matrix composites in martensitic alloys Journal of Alloys and Compounds. 483: 97-101. DOI: 10.1016/J.JALLCOM.2008.08.139 |
0.408 |
|
2009 |
Scudino S, Venkataraman S, Stoica M, Surreddi K, Pauly S, Das J, Eckert J. Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons Journal of Alloys and Compounds. 483: 227-230. DOI: 10.1016/J.Jallcom.2008.07.149 |
0.794 |
|
2009 |
Pauly S, Das J, Mattern N, Kim D, Eckert J. Phase formation and thermal stability in Cu–Zr–Ti(Al) metallic glasses Intermetallics. 17: 453-462. DOI: 10.1016/J.Intermet.2008.12.003 |
0.548 |
|
2009 |
Lee KS, Jun H, Pauly S, Bartusch B, Chang YW, Eckert J. Thermomechanical characterization of Cu47.5Zr47.5Al5 bulk metallic glass within the homogeneous flow regime Intermetallics. 17: 65-71. DOI: 10.1016/J.Intermet.2008.09.011 |
0.415 |
|
2009 |
Pauly S, Liu G, Wang G, Kühn U, Mattern N, Eckert J. Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites Acta Materialia. 57: 5445-5453. DOI: 10.1016/J.Actamat.2009.07.042 |
0.582 |
|
2009 |
Mattern N, Bednarčik J, Pauly S, Wang G, Das J, Eckert J. Structural evolution of Cu–Zr metallic glasses under tension Acta Materialia. 57: 4133-4139. DOI: 10.1016/J.Actamat.2009.05.011 |
0.34 |
|
2007 |
Eckert J, Das J, Pauly S, Duhamel C, Kim KB, Yi S, Wang WH. Impact of Microstructural Inhomogenities on the Ductility of Bulk Metallic Glasses Materials Transactions. 48: 1806-1811. DOI: 10.2320/Matertrans.Mj200725 |
0.531 |
|
2007 |
Eckert J, Das J, Pauly S, Duhamel C. Mechanical properties of bulk metallic glasses and composites Journal of Materials Research. 22: 285-301. DOI: 10.1557/Jmr.2007.0050 |
0.563 |
|
2007 |
Das J, Pauly S, Duhamel C, Wei B, Eckert J. Microstructure and mechanical properties of slowly cooled Cu47.5Zr47.5Al5 Journal of Materials Research. 22: 326-333. DOI: 10.1557/Jmr.2007.0033 |
0.533 |
|
2007 |
Pauly S, Das J, Duhamel C, Eckert J. Martensite Formation in a Ductile Cu47.5Zr47.5Al5 Bulk Metallic Glass Composite Advanced Engineering Materials. 9: 487-491. DOI: 10.1002/Adem.200700044 |
0.536 |
|
2007 |
Eckert J, Das J, Pauly S, Duhamel C. Processing Routes, Microstructure and Mechanical Properties of Metallic Glasses and their Composites Advanced Engineering Materials. 9: 443-453. DOI: 10.1002/Adem.200700043 |
0.499 |
|
Show low-probability matches. |