| Year |
Citation |
Score |
| 2019 |
DeLeon LCA, Baker WP, Palazotto AN. Modeling a Nonlinear Melt Region as a Result of High-Speed Sliding Journal of Thermophysics and Heat Transfer. 33: 808-816. DOI: 10.2514/1.T5616 |
0.311 |
|
| 2019 |
Palazotto AN. Analysis of Nonlinear Free-Response of a Thin Plate Using Finite Elements Journal of Engineering Mechanics. 145: 06019003. DOI: 10.1061/(Asce)Em.1943-7889.0001609 |
0.324 |
|
| 2019 |
Newell DJ, O'Hara RP, Cobb GR, Palazotto AN, Kirka MM, Burggraf LW, Hess JA. Mitigation of scan strategy effects and material anisotropy through supersolvus annealing in LPBF IN718 Materials Science and Engineering: A. 764: 138230. DOI: 10.1016/J.Msea.2019.138230 |
0.305 |
|
| 2019 |
Graves DP, Moore KD, Palazotto AN. Analysis of a celestial icosahedron shaped vacuum lighter than air vehicle Aerospace Science and Technology. 95: 105344. DOI: 10.1016/J.Ast.2019.105344 |
0.331 |
|
| 2019 |
Knapp K, Palazotto A, Scott-Emuakpor O, Holycross C. Enhanced Pre-Strain Application for Goodman Data Generated with Vibration-Based Testing Experimental Mechanics. 59: 263-276. DOI: 10.1007/S11340-018-00450-7 |
0.386 |
|
| 2019 |
Liu BC, Palazotto AN, Nassiri A, Vivek A, Daehn GS. Experimental and numerical investigation of interfacial microstructure in fully age-hardened 15-5 PH stainless steel during impact welding Journal of Materials Science. 54: 9824-9842. DOI: 10.1007/S10853-019-03546-0 |
0.409 |
|
| 2019 |
Liu BC, Palazotto A, Vivek A, Daehn GS. Impact welding of ultra-high-strength stainless steel in wrought vs. additively manufactured forms The International Journal of Advanced Manufacturing Technology. 104: 4593-4604. DOI: 10.1007/S00170-019-04320-X |
0.301 |
|
| 2018 |
Snyder JW, Palazotto A. Finite Element Design and Modal Analysis of a Hexakis Icosahedron Frame for Use in a Vacuum Lighter-Than-Air Vehicle Journal of Engineering Mechanics-Asce. 144: 4018042. DOI: 10.1061/(Asce)Em.1943-7889.0001462 |
0.306 |
|
| 2018 |
Provchy ZA, Palazotto AN, Flater PJ. Topology Optimization for Projectile Design Journal of Dynamic Behavior of Materials. 4: 129-137. DOI: 10.1007/S40870-018-0143-9 |
0.314 |
|
| 2017 |
Park CY, Palazotto AN, Hale CS, Jung HK. Internal longitudinal damage detection in a steel beam using Lamb waves: Simulation and test study: Journal of Intelligent Material Systems and Structures. 29: 411-422. DOI: 10.1177/1045389X17708046 |
0.703 |
|
| 2017 |
Abid NH, Abu Al-Rub RK, Palazotto AN. Micromechanical Finite Element Analysis of the Effects of Martensite Particle Size and Ferrite Grain Boundaries on the Overall Mechanical Behavior of Dual Phase Steel Journal of Engineering Materials and Technology. 139. DOI: 10.1115/1.4036687 |
0.307 |
|
| 2017 |
Just LW, DeLuca AM, Palazotto AN. Nonlinear Dynamic Analysis of an Icosahedron Frame which Exhibits Chaotic Behavior Journal of Computational and Nonlinear Dynamics. 12. DOI: 10.1115/1.4034265 |
0.358 |
|
| 2017 |
Easterday O, Palazotto A, Baker W, Branam R. Damping properties of coatings at elevated temperatures Surface & Coatings Technology. 321: 186-199. DOI: 10.1016/J.Surfcoat.2017.04.025 |
0.782 |
|
| 2017 |
Abid NH, Al-Rub RKA, Palazotto AN. Micromechanical finite element analysis of the effects of martensite morphology on the overall mechanical behavior of dual phase steel International Journal of Solids and Structures. 104: 8-24. DOI: 10.1016/J.Ijsolstr.2016.11.005 |
0.359 |
|
| 2017 |
Cranston B, AlGhofaily M, Palazotto A. Design and structural analysis of unique structures under an internal vacuum Aerospace Science and Technology. 68: 68-76. DOI: 10.1016/J.Ast.2017.04.028 |
0.421 |
|
| 2017 |
Graves WTJ, Liu D, Palazotto AN. Impact of an Additively Manufactured Projectile Journal of Dynamic Behavior of Materials. 3: 362-376. DOI: 10.1007/S40870-017-0102-X |
0.406 |
|
| 2016 |
Alban CJ, Palazotto AN, Rutledge JL. Thermal Considerations with Respect to Sliding Contact at High Speed Journal of Thermophysics and Heat Transfer. 30: 54-61. DOI: 10.2514/1.T4548 |
0.388 |
|
| 2016 |
Yeo C, Palazotto A, Song J, Buentello R. Evaluation of Thermomechanical Damage of a Slipper and Rail in a Rocket Sled System Journal of Testing and Evaluation. 44: 20140367. DOI: 10.1520/Jte20140367 |
0.37 |
|
| 2016 |
Song R, Muliana AH, Palazotto A. An empirical approach to evaluate creep responses in polymers and polymeric composites and determination of design stresses Composite Structures. 148: 207-223. DOI: 10.1016/J.Compstruct.2016.03.041 |
0.321 |
|
| 2016 |
Song R, Muliana AH, Palazotto A. Analyzing time- and temperature dependent responses of NARloy-Z Computational Materials Science. 115: 26-40. DOI: 10.1016/J.Commatsci.2015.12.005 |
0.355 |
|
| 2016 |
Wuertemberger L, Palazotto AN. Evaluation of Flow and Failure Properties of Treated 4130 Steel Journal of Dynamic Behavior of Materials. 2: 207-222. DOI: 10.1007/S40870-016-0059-1 |
0.437 |
|
| 2015 |
Abu Al-Rub RK, Ettehad M, Palazotto AN. Microstructural modeling of dual phase steel using a higher-order gradient plasticity-damage model International Journal of Solids and Structures. 58: 178-189. DOI: 10.4028/Www.Scientific.Net/Amm.784.119 |
0.398 |
|
| 2015 |
Adorno-Rodriguez R, Palazotto AN. Nonlinear structural analysis of an icosahedron under an internal vacuum Journal of Aircraft. 52: 878-883. DOI: 10.2514/1.C033284 |
0.362 |
|
| 2015 |
Buentello-Hernandez RG, Palazotto A. Development of a Model Considering High-Speed Sliding Wear Journal of Aerospace Engineering. 28: 4014140. DOI: 10.1061/(Asce)As.1943-5525.0000455 |
0.401 |
|
| 2015 |
O'Hara RP, Deleon N, Palazotto A. Structural identification and simulation of a MAV forewing Composite Structures. 119: 315-321. DOI: 10.1016/J.Compstruct.2014.08.043 |
0.402 |
|
| 2015 |
Abid NH, Abu Al-Rub RK, Palazotto AN. Computational modeling of the effect of equiaxed heterogeneous microstructures on strength and ductility of dual phase steels Computational Materials Science. 103: 20-37. DOI: 10.1016/J.Commatsci.2015.02.051 |
0.377 |
|
| 2014 |
Cox GS, Palazotto AN, Brown JM, George TJ. Traveling wave excitation: A method to produce consistent experimental results Journal of Engineering For Gas Turbines and Power. 136. DOI: 10.1115/1.4027744 |
0.653 |
|
| 2013 |
Norris AG, Palazotto AN, Cobb RG. Experimental structural dynamic characterization of the hawkmoth (manduca sexta) forewing International Journal of Micro Air Vehicles. 5: 39-54. DOI: 10.1260/1756-8293.5.1.39 |
0.314 |
|
| 2013 |
Sabat JW, Palazotto AN. Structural performance of composite material for a slotted waveguide antenna stiffened structure under compression Composite Structures. 97: 202-210. DOI: 10.1016/J.Compstruct.2012.09.057 |
0.381 |
|
| 2013 |
Hollenbeck AC, Palazotto AN. Mechanical Characterization of Flight Mechanism in the Hawkmoth Manduca Sexta Experimental Mechanics. 53: 1189-1199. DOI: 10.1007/S11340-013-9726-5 |
0.337 |
|
| 2012 |
O'Hara RP, Palazotto AN. The morphological characterization of the forewing of the Manduca sexta species for the application of biomimetic flapping wing micro air vehicles. Bioinspiration & Biomimetics. 7: 046011. PMID 23093001 DOI: 10.1088/1748-3182/7/4/046011 |
0.366 |
|
| 2012 |
Abu Al-Rub RK, Palazotto AN. Nonlocal gradient-dependent constitutive model for simulating localized damage and fracture of viscoplastic solids under high-energy impacts International Journal For Multiscale Computational Engineering. 10: 503-526. DOI: 10.1615/Intjmultcompeng.2012002920 |
0.462 |
|
| 2012 |
Demasi L, Palazotto A, Hollenbeck A, Cavallaro R. Exploratory structural investigation of a hawkmoth-inspired MAV's thorax International Journal of Micro Air Vehicles. 4: 291-304. DOI: 10.1260/1756-8293.4.4.291 |
0.363 |
|
| 2012 |
Hollenbeck AC, Palazotto AN. Methods Used to Evaluate the Hawkmoth (Manduca Sexta) as a Flapping-Wing Micro Air Vehicle International Journal of Micro Air Vehicles. 4: 119-132. DOI: 10.1260/1756-8293.4.2.119 |
0.327 |
|
| 2012 |
Hale CS, Palazotto AN, Baker WP. Engineering approach for the evaluation of mechanical wear considering the experimental Holloman High-Speed Test Track Journal of Engineering Mechanics. 138: 1127-1140. DOI: 10.1061/(Asce)Em.1943-7889.0000409 |
0.754 |
|
| 2012 |
Gardenier HE, Palazotto AN, Larson RA. Development and investigation of a slotted beam impact experiment for intermediate strain rates Journal of Aerospace Engineering. 25: 294-307. DOI: 10.1061/(Asce)As.1943-5525.0000112 |
0.549 |
|
| 2011 |
Al-Rub RKA, Palazotto AN. Nonlocal constitutive model for simulating localized damage and fracture of viscoplastic solids under high energy impacts Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. DOI: 10.2514/6.2011-2175 |
0.333 |
|
| 2011 |
Shepherd MJ, Cobb RG, Palazotto AN, Baker WP. Scaling Analyses for Large-Scale Space-Based Membrane Optics Aiaa Journal. 49: 1313-1323. DOI: 10.2514/1.45770 |
0.336 |
|
| 2011 |
Lodygowski A, Voyiadjis GZ, Deliktas B, Palazotto A. Non-local and numerical formulations for dry sliding friction and wear at high velocities International Journal of Plasticity. 27: 1004-1024. DOI: 10.1016/J.Ijplas.2010.10.008 |
0.451 |
|
| 2011 |
Abu Al-Rub RK, Palazotto AN. Nonlocal microdamage constitutive model for high energy impacts Conference Proceedings of the Society For Experimental Mechanics Series. 3: 59-66. |
0.36 |
|
| 2010 |
Pierce CJ, Palazotto AN, Rosenberger AH. Creep and fatigue interaction in the PWA1484 single crystal nickel-base alloy Materials Science and Engineering A. 527: 7484-7489. DOI: 10.1016/J.Msea.2010.08.033 |
0.373 |
|
| 2010 |
Al-Rub RKA, Palazotto AN. Micromechanical theoretical and computational modeling of energy dissipation due to nonlinear vibration of hard ceramic coatings with microstructural recursive faults International Journal of Solids and Structures. 47: 2131-2142. DOI: 10.1016/J.Ijsolstr.2010.04.016 |
0.359 |
|
| 2009 |
Larson RA, Palazotto AN, Gardenier HE. Impact response of titanium and titanium boride monolithic and functionally graded composite plates Aiaa Journal. 47: 676-691. DOI: 10.2514/1.38577 |
0.588 |
|
| 2009 |
Larson RA, Palazotto AN. Property estimation in FGM plates subject to low-velocity impact loading Journal of Mechanics of Materials and Structures. 4: 1429-1451. DOI: 10.2140/Jomms.2009.4.1429 |
0.532 |
|
| 2009 |
Han S, Palazotto AN, Leakeas CL. Finite-element analysis of lamb wave propagation in a thin aluminum plate Journal of Aerospace Engineering. 22: 185-197. DOI: 10.1061/(Asce)0893-1321(2009)22:2(185) |
0.386 |
|
| 2009 |
Holstein RG, Palazotto AN, Cobb RG. Structural Design Considerations of an Inflatable Rigidizable Space Shuttle Experiment Journal of Aerospace Engineering. 22: 123-133. DOI: 10.1061/(Asce)0893-1321(2009)22:2(123) |
0.324 |
|
| 2009 |
Pollak RD, Palazotto AN. A comparison of maximum likelihood models for fatigue strength characterization in materials exhibiting a fatigue limit Probabilistic Engineering Mechanics. 24: 236-241. DOI: 10.1016/J.Probengmech.2008.06.006 |
0.737 |
|
| 2009 |
Deliktas B, Voyiadjis GZ, Palazotto AN. Simulation of perforation and penetration in metal matrix composite materials using coupled viscoplastic damage model Composites Part B: Engineering. 40: 434-442. DOI: 10.1016/J.Compositesb.2009.04.019 |
0.471 |
|
| 2009 |
Voyiadjis GZ, Deliktas B, Palazotto AN. Thermodynamically consistent coupled viscoplastic damage model for perforation and penetration in metal matrix composite materials Composites Part B: Engineering. 40: 427-433. DOI: 10.1016/J.Compositesb.2009.01.008 |
0.411 |
|
| 2009 |
Hale CS, Palazotto AN, Baker WP. Consideration of wear at high velocities Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. |
0.663 |
|
| 2008 |
Voyiadjis GZ, Palazotto AN, Al-Rub RKA. Constitutive Modeling and Simulation of Perforation of Targets by Projectiles Aiaa Journal. 46: 304-316. DOI: 10.2514/1.26011 |
0.403 |
|
| 2008 |
Cinnamon JD, Palazotto AN, Szmerekovsky AG. Further refinement and validation of material models for hypervelocity gouging impacts Aiaa Journal. 46: 317-327. DOI: 10.2514/1.25035 |
0.798 |
|
| 2008 |
Reed SA, Palazotto AN, Baker WP. An experimental technique for the evaluation of strain dependent material properties of hard coatings Shock and Vibration. 15: 697-712. DOI: 10.1155/2008/853689 |
0.385 |
|
| 2008 |
Frank Pai P, Palazotto AN. HHT-based nonlinear signal processing method for parametric and non-parametric identification of dynamical systems International Journal of Mechanical Sciences. 50: 1619-1635. DOI: 10.1016/J.Ijmecsci.2008.10.001 |
0.317 |
|
| 2008 |
Yun SJ, Palazotto A. Plastic deformation under cyclic loading using two-back stress hardening models International Journal of Fatigue. 30: 473-482. DOI: 10.1016/J.Ijfatigue.2007.04.007 |
0.378 |
|
| 2008 |
Fredrickson BM, Schoeppner GA, Mollenhauer DH, Palazotto AN. Application of three-dimensional spline variational analysis for composite repair Composite Structures. 83: 119-130. DOI: 10.1016/J.Compstruct.2007.04.017 |
0.354 |
|
| 2008 |
Mollenhauer DH, Fredrickson BM, Schoeppner GA, Iarve EV, Palazotto AN. Moiré interferometry measurements of composite laminate repair behavior: Influence of grating thickness on interlaminar response Composites Part a-Applied Science and Manufacturing. 39: 1322-1330. DOI: 10.1016/J.Compositesa.2008.02.015 |
0.412 |
|
| 2007 |
Shepherd MJ, Cobb RG, Peterson GA, Palazotto AN. Quasi-static optics-based surface control of an in-plane actuated membrane mirror Journal of Spacecraft and Rockets. 44: 953-963. DOI: 10.2514/1.24847 |
0.314 |
|
| 2007 |
Cinnamon JD, Palazotto AN, Szmerekovsky AG, Pendleton RJ. Investigation of scaled hypervelocity gouging model and validation of material constitutive models Aiaa Journal. 45: 1104-1112. DOI: 10.2514/1.19940 |
0.776 |
|
| 2007 |
Blackwell C, Palazotto A, George TJ, Cross CJ. The Evaluation of the Damping Characteristics of a Hard Coating on Titanium Shock and Vibration. 14: 37-51. DOI: 10.1155/2007/260183 |
0.359 |
|
| 2007 |
Cinnamon JD, Palazotto AN. Metallographic examination and validation of thermal effects in hypervelocity gouging Journal of Pressure Vessel Technology, Transactions of the Asme. 129: 133-141. DOI: 10.1115/1.2389030 |
0.785 |
|
| 2007 |
Vandawaker RM, Palazotto AN, Cobb RG. Damage Detection Through Analysis of Modes in a Partially Constrained Plate Journal of Aerospace Engineering. 20: 90-96. DOI: 10.1061/(Asce)0893-1321(2007)20:2(90) |
0.341 |
|
| 2007 |
Frank Pai P, Palazotto AN. Two-dimensional sublamination theory for analysis of functionally graded plates Journal of Sound and Vibration. 308: 164-189. DOI: 10.1016/J.Jsv.2007.07.027 |
0.373 |
|
| 2007 |
Cinnamon JD, Palazotto AN. Analysis and simulation of hypervelocity gouging impacts for a high speed sled test Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 4: 3650-3661. DOI: 10.1016/J.Ijimpeng.2007.11.009 |
0.788 |
|
| 2007 |
Cinnamon JD, Palazotto AN. Analysis and simulation of hypervelocity gouging impacts for a high speed sled test Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 4: 3650-3661. DOI: 10.1016/j.ijimpeng.2007.11.009 |
0.778 |
|
| 2007 |
Cinnamon JD, Palazotto AN. Further validation of a general approximation for impact penetration depth considering hypervelocity gouging data International Journal of Impact Engineering. 34: 1307-1326. DOI: 10.1016/J.Ijimpeng.2006.08.005 |
0.767 |
|
| 2007 |
Yun S, Palazotto A. Damage mechanics incorporating two back stress kinematic hardening constitutive models Engineering Fracture Mechanics. 74: 2844-2863. DOI: 10.1016/J.Engfracmech.2006.12.032 |
0.405 |
|
| 2006 |
Voyiadjis GZ, Abu Al-Rub RK, Palazotto AN. On the small and finite deformation thermo-elasto-viscoplasticity theory for strain localization problems algorithmic and computational aspects European Journal of Computational Mechanics. 15: 945-987. DOI: 10.3166/Remn.15.945-987 |
0.406 |
|
| 2006 |
Szmerekovsky AG, Palazotto AN. Structural dynamic considerations for a hydrocode analysis of hypervelocity test sled impacts Aiaa Journal. 44: 1350-1359. DOI: 10.2514/1.13803 |
0.805 |
|
| 2006 |
Larson RA, Palazotto A. Low velocity impact analysis of functionally graded circular plates American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. DOI: 10.1115/IMECE2006-14003 |
0.477 |
|
| 2006 |
Pollak R, Palazotto A, Nicholas T. A simulation-based investigation of the staircase method for fatigue strength testing Mechanics of Materials. 38: 1170-1181. DOI: 10.1016/J.Mechmat.2005.12.005 |
0.739 |
|
| 2006 |
Cinnamon JD, Palazotto AN, Kennan Z. Material characterization and development of a constitutive relationship for hypervelocity impact of 1080 Steel and VascoMax 300 International Journal of Impact Engineering. 33: 180-189. DOI: 10.1016/J.Ijimpeng.2006.09.030 |
0.791 |
|
| 2006 |
Szmerekovsky AG, Palazotto AN, Baker WP. Scaling numerical models for hypervelocity test sled slipper-rail impacts International Journal of Impact Engineering. 32: 928-946. DOI: 10.1016/J.Ijimpeng.2004.09.011 |
0.796 |
|
| 2006 |
Cinnamon JD, Palazotto AN, Brar NS. Further refinement of material models for hypervelocity gouging impacts Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 8: 5894-5909. |
0.796 |
|
| 2006 |
Szmerekovsky AG, Palazotto AN, Cinnamon JD. An improved study of temperature changes during hypervelocity sliding high energy impact Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 8: 5932-5941. |
0.764 |
|
| 2005 |
Cinnamon JD, Palazotto AN. Metallographic examination of thermal effects in hypervelocity gouging American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 4: 797-805. DOI: 10.1115/PVP2005-71613 |
0.771 |
|
| 2005 |
Cinnamon JD, Palazotto AN. Refinement of a hypervelocity gouging model for the rocket sled test American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 256: 425-434. DOI: 10.1115/IMECE2005-80004 |
0.789 |
|
| 2005 |
Ivancic F, Palazotto A. Experimental considerations for determining the damping coefficients of hard coatings Journal of Aerospace Engineering. 18: 8-17. DOI: 10.1061/(Asce)0893-1321(2005)18:1(8) |
0.344 |
|
| 2005 |
Lanning DB, Nicholas T, Palazotto A. The effect of notch geometry on critical distance high cycle fatigue predictions International Journal of Fatigue. 27: 1623-1627. DOI: 10.1016/J.Ijfatigue.2005.06.017 |
0.334 |
|
| 2004 |
Palazotto AN. Review of "An Introduction to Nonlinear Finite Element Analysis" Aiaa Journal. 42: 2622-2623. DOI: 10.2514/1.14522 |
0.303 |
|
| 2004 |
Patel RS, Palazotto AN. Finite-element method-based model to study high-cycle fatigue in turbine blades Journal of Aerospace Engineering. 17: 45-55. DOI: 10.1061/(Asce)0893-1321(2004)17:2(45) |
0.32 |
|
| 2004 |
Laird DJ, Palazotto AN. Gouge development during hypervelocity sliding impact International Journal of Impact Engineering. 30: 205-223. DOI: 10.1016/S0734-743X(03)00059-9 |
0.709 |
|
| 2004 |
Voyiadjis GZ, Abu Al-Rub RK, Palazotto AN. Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient theory International Journal of Plasticity. 20: 981-1038. DOI: 10.1016/J.Ijplas.2003.10.002 |
0.328 |
|
| 2004 |
Szmerekovsky AG, Palazotto AN, Ernst MR. Numerical analysis for a study of the mitigation of hypervelocity gouging Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 6: 4309-4318. |
0.772 |
|
| 2003 |
Laird DJ, Palazotto AN. Effect of Temperature on the Process of Hypervelocity Gouging Aiaa Journal. 41: 2251-2260. DOI: 10.2514/2.6818 |
0.696 |
|
| 2003 |
Voyiadjis GZ, Al-Rub RKA, Palazotto AN. Non-local coupling of viscoplasticity and anisotropic viscodamage for impact problems using the gradient theory Archives of Mechanics. 55: 39-89. DOI: 10.24423/Aom.123 |
0.435 |
|
| 2003 |
Naboulsi SK, Palazotto AN. Elastic-plastic damage model for composites under high intensity loading Journal of Thermoplastic Composite Materials. 16: 31-43. DOI: 10.1177/0892705703016001211 |
0.393 |
|
| 2003 |
Lanning DB, Nicholas T, Palazotto A. HCF notch predictions based on weakest-link failure models International Journal of Fatigue. 25: 835-841. DOI: 10.1016/S0142-1123(03)00156-7 |
0.321 |
|
| 2003 |
Perel VY, Palazotto AN. Dynamic geometrically nonlinear analysis of transversely compressible sandwich plates International Journal of Non-Linear Mechanics. 38: 337-356. DOI: 10.1016/S0020-7462(01)00065-8 |
0.788 |
|
| 2003 |
Naboulsi SK, Palazotto AN. Non-linear static-dynamic finite element formulation for composite shells International Journal of Non-Linear Mechanics. 38: 87-110. DOI: 10.1016/S0020-7462(01)00049-X |
0.4 |
|
| 2002 |
Perel VY, Palazotto AN. Finite element formulation for thick sandwich plates on an elastic foundation Aiaa Journal. 40: 1627-1637. DOI: 10.2514/2.1833 |
0.791 |
|
| 2002 |
Voyiadjis G, Palazotto A, Gao X. Modeling of metallic
materials at high strain rates with continuum damage mechanics Applied Mechanics Reviews. 55: 481-493. DOI: 10.1115/1.1495522 |
0.385 |
|
| 2002 |
Baker WP, Palazotto AN, Laird DJ. Thermal diffusion and associated stress field due to high speed source Journal of Aerospace Engineering. 15: 118-124. DOI: 10.1061/(Asce)0893-1321(2002)15:3(118) |
0.673 |
|
| 2002 |
Palazotto AN. Review of
Pressure Vessels
, by Carl T. F. Ross Journal of Aerospace Engineering. 15: 32-32. DOI: 10.1061/(Asce)0893-1321(2002)15:1(32) |
0.353 |
|
| 2002 |
Naboulsi SK, Palazotto AN. Damage model for metal-matrix composite under high intensity loading International Journal of Plasticity. 19: 435-468. DOI: 10.1016/S0749-6419(01)00043-2 |
0.421 |
|
| 2002 |
Perel VY, Palazotto AN. Finite element formulation for dynamics of delaminated composite beams with piezoelectric actuators International Journal of Solids and Structures. 39: 4457-4483. DOI: 10.1016/S0020-7683(02)00348-7 |
0.784 |
|
| 2001 |
Naboulsi SK, Palazotto AN. Thermomicromechanical damage in composites Aiaa Journal. 39: 141-152. DOI: 10.2514/2.1282 |
0.364 |
|
| 2001 |
Boatwright JT, Palazotto AN. Fatigue Loading Considerations For A Composite Cylindrical Shell With A Square Cutout International Journal of Computational Engineering Science. 2: 223-248. DOI: 10.1142/S1465876301000301 |
0.369 |
|
| 2001 |
Spottswood SM, Palazotto AN. Progressive failure analysis of a composite shell Composite Structures. 53: 117-131. DOI: 10.1016/S0263-8223(00)00183-5 |
0.379 |
|
| 2001 |
Perel VY, Palazotto AN. Finite element formulation for cylindrical bending of a transversely compressible sandwich plate, based on assumed transverse strains International Journal of Solids and Structures. 38: 5373-5409. DOI: 10.1016/S0020-7683(00)00293-6 |
0.787 |
|
| 2001 |
Perel VY, Palazotto AN. Finite element formulation for thick sandwich plates on elastic foundation 19th Aiaa Applied Aerodynamics Conference. |
0.318 |
|
| 2001 |
Perel VY, Palazotto AN. Finite element formulation for thick sandwich plates on elastic foundation 19th Aiaa Applied Aerodynamics Conference. |
0.782 |
|
| 2000 |
Vaidya UK, Palazotto AN, Gummadi LNB. Low velocity impact and compression-after-impact response of Z-pin reinforced core sandwich composites Journal of Engineering Materials and Technology, Transactions of the Asme. 122: 434-442. DOI: 10.1115/1.1289141 |
0.383 |
|
| 2000 |
Naboulsi SK, Palazotto AN, Greer JM. Static-dynamic analyses of toroidal shells Journal of Aerospace Engineering. 13: 110-121. DOI: 10.1061/(Asce)0893-1321(2000)13:3(110) |
0.399 |
|
| 2000 |
Naboulsi SK, Palazotto AN. Thermodynamic damage model for composite under severe loading Journal of Engineering Mechanics. 126: 1001-1011. DOI: 10.1061/(Asce)0733-9399(2000)126:10(1001) |
0.408 |
|
| 2000 |
Pai PF, Palazotto AN. A higher-order sandwich plate theory accounting for 3-D stresses 41st Structures, Structural Dynamics, and Materials Conference and Exhibit. DOI: 10.1016/S0020-7683(00)00356-5 |
0.379 |
|
| 1999 |
Gummadi LNB, Palazotto AN. Nonlinear dynamic finite element analysis of composite cylindrical shells considering large rotations Aiaa Journal. 37: 1489-1494. DOI: 10.2514/2.628 |
0.411 |
|
| 1999 |
Palazotto AN, Herup EJ, Gummadi LNB. Finite element analysis of low velocity impact on composite sandwich plates Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 1: 739-749. DOI: 10.1016/S0263-8223(99)00136-1 |
0.435 |
|
| 1998 |
Raouf RA, Palazotto A. Dynamic Instability of Tires under Asymmetric Loads Journal of Aerospace Engineering. 11: 32-36. DOI: 10.1061/(Asce)0893-1321(1998)11:2(32) |
0.323 |
|
| 1998 |
Greer JM, Palazotto AN. Tire contact using two-dimensional finite elements Journal of Engineering Mechanics. 124: 348-357. DOI: 10.1061/(Asce)0733-9399(1998)124:3(348) |
0.393 |
|
| 1998 |
Gummadi LNB, Palazotto AN. Progressive failure analysis of composite cylindrical shells considering large rotations Composites Part B: Engineering. 29: 547-563. DOI: 10.1016/S1359-8368(98)00010-9 |
0.356 |
|
| 1998 |
Herup EJ, Palazotto AN. Low-velocity impact damage initiation in graphite/epoxy/Nomex honeycomb-sandwich plates Composites Science and Technology. 57: 1581-1598. DOI: 10.1016/S0266-3538(97)00089-4 |
0.399 |
|
| 1998 |
Palazotto AN, Gummadi LNB, Vaidya UK, Herup EJ. Low velocity impact damage characteristics of Z-fiber reinforced sandwich panels — an experimental study Composite Structures. 43: 275-288. DOI: 10.1016/S0263-8223(98)00110-X |
0.379 |
|
| 1998 |
Pai PF, Palazotto AN, Greer JM. Polar decomposition and appropriate strains and stresses for nonlinear structural analyses Computers & Structures. 66: 823-840. DOI: 10.1016/S0045-7949(98)00004-2 |
0.336 |
|
| 1998 |
Gummadi LNB, Palazotto AN. Large strain analysis of beams and arches undergoing large rotations International Journal of Non-Linear Mechanics. 33: 615-645. DOI: 10.1016/S0020-7462(97)00033-4 |
0.365 |
|
| 1997 |
Greer JM, Palazotto AN. Singularities in polynomial representations of transverse shear in finite elements Aiaa Journal. 35: 1248-1250. DOI: 10.2514/2.233 |
0.364 |
|
| 1997 |
Herup EJ, Palazotto AN. Elasticity solutions for Hertzian loaded composite sandwich plates Journal of Aerospace Engineering. 10: 27-37. DOI: 10.1061/(Asce)0893-1321(1997)10:1(27) |
0.387 |
|
| 1997 |
Gummadi LNB, Palazotto AN. Nonlinear analysis of beams and arches undergoing large rotations Journal of Engineering Mechanics. 123: 394-398. DOI: 10.1061/(Asce)0733-9399(1997)123:4(394) |
0.404 |
|
| 1997 |
Palazotto AN, Gummadi LNB, Bailey JC. Finite element analysis of arches undergoing large rotations - II: Classification Finite Elements in Analysis and Design. 24: 237-252. DOI: 10.1016/S0168-874X(96)00050-9 |
0.386 |
|
| 1997 |
Gummadi LNB, Palazotto AN. Nonlinear finite element analysis of beams and arches using parallel processors Computers and Structures. 63: 413-428. DOI: 10.1016/S0045-7949(96)00343-4 |
0.361 |
|
| 1997 |
Greer JM, Palazotto AN. Application of a total Lagrangian corotational finite element scheme to inflation of a tire International Journal of Solids and Structures. 34: 3541-3570. DOI: 10.1016/S0020-7683(96)00210-7 |
0.387 |
|
| 1996 |
Baker WP, Eldred LB, Palazotto AN. Viscoelastic material response with a fractional-derivative constitutive model Aiaa Journal. 34: 596-600. DOI: 10.2514/3.13109 |
0.372 |
|
| 1996 |
Raouf RA, Palazotto AN. Nonlinear dynamics of unidirectional, fiber-reinforced tori Journal of Engineering Mechanics. 122: 271-276. DOI: 10.1061/(Asce)0733-9399(1996)122:3(271) |
0.306 |
|
| 1996 |
Wham B, Palazotto AN. An investigation of graphite PEEK composite under compression with a centrally located circular discontinuity Composite Structures. 35: 375-386. DOI: 10.1016/S0263-8223(96)00046-3 |
0.335 |
|
| 1996 |
Eldred L, Baker W, Palazotto A. Numerical application of fractional derivative model constitutive relations for viscoelastic materials Computers & Structures. 60: 875-882. DOI: 10.1016/0045-7949(95)00447-5 |
0.327 |
|
| 1996 |
Chaplin CP, Palazotto AN. The collapse of composite cylindrical panels with various thickness using finite element analysis Computers and Structures. 60: 797-815. DOI: 10.1016/0045-7949(95)00344-4 |
0.37 |
|
| 1996 |
Pai PF, Palazotto AN. Large-deformation analysis of flexible beams International Journal of Solids and Structures. 33: 1335-1353. DOI: 10.1016/0020-7683(95)00090-9 |
0.378 |
|
| 1996 |
Greer JM, Palazotto AN. Non-linear finite element analysis of isotropic and composite shells by a total lagrangian decomposition scheme Mechanics of Composite Materials and Structures. 3: 241-271. DOI: 10.1002/(Sici)1234-986X(199609)3:3<241::Aid-Mcm42>3.3.Co;2-U |
0.389 |
|
| 1995 |
Palazotto AN, Birman V. Review of fracture in adhesive joints considering rocket motor application Journal of Spacecraft and Rockets. 32: 538-544. DOI: 10.2514/3.26648 |
0.311 |
|
| 1995 |
Eldred LB, Baker WP, Palazotto AN. Kelvin-Voigt versus fractional derivative model as constitutive relations for viscoelastic materials Aiaa Journal. 33: 547-550. DOI: 10.2514/3.12471 |
0.35 |
|
| 1995 |
Palazotto AN, Birman V. Environmental and viscoelastic effects on stresses in adhesive joints Journal of Aerospace Engineering. 8: 107-119. DOI: 10.1061/(Asce)0893-1321(1995)8:2(107) |
0.342 |
|
| 1995 |
Greer JM, Palazotto AN. Nonlinear dynamics of simple shell model with chaotic snapping behavior Journal of Engineering Mechanics. 121: 753-761. DOI: 10.1061/(Asce)0733-9399(1995)121:6(753) |
0.379 |
|
| 1995 |
Pai PF, Palazotto AN. Polar Decomposition Theory in Nonlinear Analyses of Solids and Structures Journal of Engineering Mechanics. 121: 568-581. DOI: 10.1061/(Asce)0733-9399(1995)121:4(568) |
0.341 |
|
| 1995 |
Miller DA, Palazotto AN. Nonlinear finite element analysis of composite beams and arches using a large rotation theory Finite Elements in Analysis and Design. 19: 131-152. DOI: 10.1016/0168-874X(95)00004-D |
0.414 |
|
| 1995 |
Pai PF, Palazotto AN. Nonlinear displacement-based finite-element analyses of composite shells-A new total Lagrangian formulation International Journal of Solids and Structures. 32: 3047-3073. DOI: 10.1016/0020-7683(94)00273-Y |
0.396 |
|
| 1994 |
Greer JM, Palazotto AN. Some nonlinear response characteristics of collapsing composite shells Aiaa Journal. 32: 1935-1938. DOI: 10.2514/3.12199 |
0.32 |
|
| 1994 |
Schimmels SA, Palazotto AN. Nonlinear geometric and material behavior of shell structures with large strains Journal of Engineering Mechanics. 120: 320-345. DOI: 10.1061/(Asce)0733-9399(1994)120:2(320) |
0.408 |
|
| 1994 |
Dennis ST, Horban BA, Palazotto AN. Instability in a cylindrical panel subjected to normal pressure: Bifurcation vs nonlinear analyses Composites Engineering. 4. DOI: 10.1016/0961-9526(94)90104-X |
0.331 |
|
| 1994 |
Tighe KV, Palazotto AN. Higher order cylindrical panel relationships considering general ply layups Composite Structures. 27: 225-242. DOI: 10.1016/0263-8223(94)90084-1 |
0.402 |
|
| 1994 |
Creaghan SG, Palazotto AN. Nonlinear large displacement and moderate rotational characteristics of composite beams incorporating transverse shear strain Computers and Structures. 51: 357-371. DOI: 10.1016/0045-7949(94)90321-2 |
0.427 |
|
| 1994 |
Martin RJ, Sandhu RS, Palazotto AN. Experimental and analytical comparisons of failure in thermoplastic composite laminates Experimental Mechanics. 34: 53-65. DOI: 10.1007/Bf02328442 |
0.302 |
|
| 1993 |
Smith RA, Palazotto AN. Comparison of eight variations of a higher-order theory for cylindrical shells Aiaa Journal. 31: 1125-1132. DOI: 10.2514/3.11737 |
0.376 |
|
| 1993 |
Levraea VJ, Palazotto AN, Maddux GE. The effect of cutout positioning on the dynamic characteristics of a curved composite panel Composite Structures. 23: 263-272. DOI: 10.1016/0263-8223(93)90227-H |
0.329 |
|
| 1993 |
Palazotto AN, Hatfield JC. Effect of thickness and ply layup on the collapse characteristics of cylindrical composite shells American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 159: 153-162. |
0.342 |
|
| 1992 |
Palazotto A, Perry R, Sandhu R. Impact response of graphite/epoxy cylindrical panels Aiaa Journal. 30: 1827-1832. DOI: 10.2514/3.11143 |
0.404 |
|
| 1992 |
Palazotto AN, Chien LS, Taylor WW. Stability characteristics of laminated cylindrical panels under transverse loading Aiaa Journal. 30: 1649-1653. DOI: 10.2514/3.11113 |
0.401 |
|
| 1992 |
Schimmels SA, Palazotto AN. Collapse characteristics of cylindrical composite panels under axial loads Aiaa Journal. 30: 1447-1449. DOI: 10.2514/3.11085 |
0.388 |
|
| 1992 |
Chien LS, Palazotto AN. Nonlinear snapping considerations for laminated cylindrical panels Composites Engineering. 2: 631-639. DOI: 10.1016/0961-9526(92)90021-W |
0.38 |
|
| 1992 |
Raouf RA, Palazotto AN. Non-linear free vibrations of symmetrically laminated, slightly compressible cylindrical shell panels Composite Structures. 20: 249-257. DOI: 10.1016/0263-8223(92)90030-G |
0.317 |
|
| 1992 |
Owens M, Palazotto A, Dennis S. Transverse shear flexibility in laminated plates undergoing large deflections Computers & Structures. 45: 69-78. DOI: 10.1016/0045-7949(92)90346-2 |
0.394 |
|
| 1992 |
Fawaz SA, Palazotto AN, Wang CS. Axial tensile and compressive properties of high-performance polymeric fibres Polymer. 33: 100-105. DOI: 10.1016/0032-3861(92)90566-F |
0.362 |
|
| 1992 |
Chien LS, Palazotto AN. Dynamic buckling of composite cylindrical panels with high-order transverse shears subjected to a transverse concentrated load International Journal of Non-Linear Mechanics. 27: 719-734. DOI: 10.1016/0020-7462(92)90029-7 |
0.362 |
|
| 1991 |
Dennis ST, Palazotto AN. Laminated shell in cylindrical bending, two-dimensional approach vs exact Aiaa Journal. 29: 647-650. DOI: 10.2514/3.10634 |
0.347 |
|
| 1991 |
Raouf RA, Palazotto AN. Nonlinear dynamic response of anisotropic, arbitrarily laminated shell panels: An asymptotic analysis Composite Structures. 18: 163-192. DOI: 10.1016/0263-8223(91)90049-5 |
0.328 |
|
| 1991 |
Tsai C, Palazotto A, Dennis S. Large-rotation snap-through buckling in laminated cylindrical panels Finite Elements in Analysis and Design. 9: 65-75. DOI: 10.1016/0168-874X(91)90019-U |
0.403 |
|
| 1991 |
Tsai CT, Palazotto AN. Nonlinear and multiple snapping responses of cylindrical panels comparing displacement control and riks method Computers and Structures. 41: 605-610. DOI: 10.1016/0045-7949(91)90172-I |
0.374 |
|
| 1991 |
Palazotto AN, Linnemann PE. Vibration and buckling characteristics of composite cylindrical panels incorporating the effects of a higher order shear theory International Journal of Solids and Structures. 28: 341-361. DOI: 10.1016/0020-7683(91)90198-O |
0.389 |
|
| 1991 |
Tsai CT, Palazotto AN. On the finite element analysis of non-linear vibration for cylindrical shells with high-order shear deformation theory International Journal of Non-Linear Mechanics. 26: 379-388. DOI: 10.1016/0020-7462(91)90067-4 |
0.42 |
|
| 1990 |
Dennis ST, Palazotto AN. Static response of a cylindrical composite panel with cutouts using a geometrically nonlinear theory Aiaa Journal. 28: 1082-1088. DOI: 10.2514/3.25170 |
0.374 |
|
| 1990 |
Tsai CT, Palazotto AN. The application of the Riks technique to shell snapping Mathematical and Computer Modelling. 14: 868-872. DOI: 10.1016/0895-7177(90)90305-7 |
0.376 |
|
| 1990 |
Shih KG, Palazotto AN. On the formulation of boundary equations for orthotropic cylindrical shells Mathematical and Computer Modelling. 14: 855-862. DOI: 10.1016/0895-7177(90)90303-5 |
0.332 |
|
| 1990 |
Palardy RF, Palazotto AN. Buckling and vibration of composite plates using the Levy method Composite Structures. 14: 61-86. DOI: 10.1016/0263-8223(90)90059-N |
0.375 |
|
| 1990 |
Tsai CT, Palazotto AN. A modified riks approach to composite shell snapping using a high-order shear deformation theory Computers and Structures. 35: 221-226. DOI: 10.1016/0045-7949(90)90341-X |
0.401 |
|
| 1990 |
Dennis ST, Palazotto AN. Large displacement and rotational formulation for laminated shells including parabolic transverse shear International Journal of Non-Linear Mechanics. 25: 67-85. DOI: 10.1016/0020-7462(90)90039-C |
0.393 |
|
| 1990 |
Palazotto AN, Mercer JG. Crack considerations in a notched compact tension specimen Engineering Fracture Mechanics. 37: 473-492. DOI: 10.1016/0013-7944(90)90374-P |
0.327 |
|
| 1990 |
Palazotto AN, Mercer JG. A finite element comparison between short and long cracks within a plastic zone due to a notch Engineering Fracture Mechanics. 35: 967-986. DOI: 10.1016/0013-7944(90)90126-2 |
0.326 |
|
| 1990 |
Schimmels SA, Palazotto AN. Collapse characteristics of free edged cylindrical composite panels under axial loads Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 689-698. |
0.322 |
|
| 1989 |
Dennis ST, Palazotto AN. Transverse shear deformation in orthotropic cylindrical pressure vessels using a higher-order shear theory Aiaa Journal. 27: 1441-1447. DOI: 10.2514/3.48914 |
0.375 |
|
| 1989 |
Ramey J, Palazotto A. A study of graphite/PEEK under high temperatures Astm Special Technical Publications. 91-112. DOI: 10.1520/Stp24597S |
0.334 |
|
| 1989 |
Shih KG, Palazotto AN. Formulation of boundary integral equations for linear elastic shells Computers and Mathematics With Applications. 18: 985-999. DOI: 10.1016/0898-1221(89)90027-8 |
0.333 |
|
| 1989 |
Palazotto AN, Hinrichsen RL, Witt WP. Inter-ply rotational compatibility for composite plates Composite Structures. 11: 167-182. DOI: 10.1016/0263-8223(89)90057-3 |
0.393 |
|
| 1989 |
Palazotto AN, Tisler TW. Experimental collapse determination of cylindrical composite panels with large cutouts under axial load Composite Structures. 12: 61-78. DOI: 10.1016/0263-8223(89)90044-5 |
0.377 |
|
| 1989 |
Palazotto AN, Mercer JG. Finite element elastic-plastic analysis of cracks Computers and Structures. 33: 363-373. DOI: 10.1016/0045-7949(89)90007-2 |
0.31 |
|
| 1989 |
Palazotto A, Maddux GE, Horban B. The use of stereo X-ray and deply techniques for evaluating instability of composite cylindrical panels with delaminations Experimental Mechanics. 29: 144-151. DOI: 10.1007/Bf02321367 |
0.414 |
|
| 1989 |
Dennis ST, Palazotto AN. Geometric nonlinear formulation for laminated shells American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 178: 91-98. |
0.304 |
|
| 1988 |
Palazotto AN. An Experimental Study of a Curved Composite Panel with a Cutout Astm Special Technical Publications. 191-202. DOI: 10.1520/Stp26135S |
0.348 |
|
| 1988 |
Ruh1 R, Palazotto AN, Watt G. Introduction to ceramic matrix composites in aerospace applications Journal of Aerospace Engineering. 1: 65-73. DOI: 10.1061/(Asce)0893-1321(1988)1:2(65) |
0.329 |
|
| 1988 |
Hinrichsen RL, Palazotto AN. Use of a cubic spline function in finite elements Mathematical and Computer Modelling. 10: 37-47. DOI: 10.1016/0895-7177(88)90120-3 |
0.351 |
|
| 1988 |
Palazotto AN, Tisler TW. Considerations of cutouts in composite cylindrical panels Computers and Structures. 29: 1101-1110. DOI: 10.1016/0045-7949(88)90334-3 |
0.344 |
|
| 1988 |
Cron SM, Palazotto AN, Sandhu RS. The improvement of end-boundary conditions for off-axis tension specimen use Experimental Mechanics. 28: 14-19. DOI: 10.1007/Bf02328989 |
0.379 |
|
| 1987 |
Bowlus JA, Palazotto AN, Whitney JM. VIBRATION OF SYMMETRICALLY LAMINATED RECTANGULAR PLATES CONSIDERING DEFORMATION AND ROTATORY INERTIA Aiaa Journal. 25: 1500-1511. DOI: 10.2514/3.9811 |
0.375 |
|
| 1987 |
Horban B, Palazotto A. Experimental buckling of cylindrical composite panels with eccentrically located circular delaminations Journal of Spacecraft and Rockets. 24: 349-352. DOI: 10.2514/3.25923 |
0.337 |
|
| 1987 |
Mercer JG, Palazotto AN. Elastic-plastic nonlinearities considering fracture mechanics Computers and Structures. 25: 919-935. DOI: 10.1016/0045-7949(87)90205-7 |
0.32 |
|
| 1987 |
Palazotto AN, Straw AD. Shear buckling of cylindrical composite panels Computers and Structures. 27: 689-692. DOI: 10.1016/0045-7949(87)90085-X |
0.372 |
|
| 1986 |
Hinrichsen RL, Palazotto AN. Nonlinear finite element analysis of thick composite plates using cubic spline functions Aiaa Journal. 24: 1836-1842. DOI: 10.2514/3.9532 |
0.425 |
|
| 1986 |
Straw AD, Palazotto AN. SHEAR BUCKLING OF COMPOSITE CYLINDRICAL PANELS CONSIDERING MATERIAL DEGRADATION Journal of Aircraft. 23: 912-914. DOI: 10.2514/3.45400 |
0.357 |
|
| 1986 |
Wilson R, Palazotto A. Viscoplastic Fatigue in a Superalloy at Elevated Temperatures Astm Special Technical Publications. 265-275. DOI: 10.1520/Stp17401S |
0.326 |
|
| 1986 |
Palazotto AN, Henkel CL. The effects of low cycle fatigue comparing compact tension and center-cracked specimens at elevated temperatures Engineering Fracture Mechanics. 24: 483-494. DOI: 10.1016/0013-7944(86)90222-5 |
0.332 |
|
| 1986 |
Siefert G, Palazotto A. The effect of a centrally located midplane delamination on the instability of composite panels Experimental Mechanics. 26: 330-336. DOI: 10.1007/Bf02320148 |
0.405 |
|
| 1985 |
Bohun MH, Palazotto AN. Comparison of two viscoplastic flow laws as applied to a problem of crack growth Engineering Fracture Mechanics. 21: 503-519. DOI: 10.1016/S0013-7944(85)80043-6 |
0.374 |
|
| 1985 |
Lee CE, Palazotto AN. Collapse analysis of composite cylindrical panels with small cutouts Composite Structures. 4: 217-229. DOI: 10.1016/0263-8223(85)90010-8 |
0.367 |
|
| 1985 |
Gans H, Palazotto AN. The comparison between three different elements within a center crack plate considering elastic-plastic action Computers and Structures. 21: 1335-1344. DOI: 10.1016/0045-7949(85)90187-7 |
0.342 |
|
| 1985 |
Palazotto AN, Witt WP. Formulation of a nonlinear compatible finite element for the analysis of laminated composites Computers and Structures. 21: 1213-1234. DOI: 10.1016/0045-7949(85)90176-2 |
0.392 |
|
| 1985 |
Keck JE, Nicholas T, Palazotto AN. High temperature viscoplastic fatigue behavior of a compact tension specimen Engineering Fracture Mechanics. 22: 77-91. DOI: 10.1016/0013-7944(85)90161-4 |
0.367 |
|
| 1985 |
Wilson RE, Palazotto AN. Viscoplasticity in a superalloy at elevated temperatures considering tension and compression loading Engineering Fracture Mechanics. 22: 927-937. DOI: 10.1016/0013-7944(85)90033-5 |
0.349 |
|
| 1984 |
Janisse TC, Palazotto AN. COLLAPSE ANALYSIS OF CYLINDRICAL COMPOSITE PANELS WITH CUTOUTS Journal of Aircraft. 21: 731-733. DOI: 10.2514/3.45021 |
0.303 |
|
| 1984 |
Mulholland MF, Palazotto AN. The non-membrane prebuckling effects on stiffened cylindrical panels Computers and Structures. 18: 1115-1120. DOI: 10.1016/0045-7949(84)90155-X |
0.324 |
|
| 1983 |
Furlong DR, Palazotto AN. A finite element analysis of the influence of surgical herniation on the viscoelastic properties of the intervertebral disc Journal of Biomechanics. 16: 785-795. PMID 6643516 DOI: 10.1016/0021-9290(83)90002-7 |
0.412 |
|
| 1983 |
Snead JM, Palazotto AN. Moisture and Temperature Effects on the Instability of Cylindrical Composite Panels. Journal of Aircraft. 20: 777-783. DOI: 10.2514/3.44942 |
0.369 |
|
| 1982 |
Gallo RL, Palazotto AN. APPROXIMATE DESIGN ANALYSIS OF FAILURE WITHIN COMPOSITE LAMINATED PLATES Journal of Mechanical Design. 104: 604-611. DOI: 10.1115/1.3256394 |
0.376 |
|
| 1982 |
Becker ML, Palazotto AN, Khot NS. Experimental investigation of the instability of composite cylindrical panels Experimental Mechanics. 22: 372-376. DOI: 10.1007/Bf02325403 |
0.398 |
|
| 1981 |
Ciardullo SW, Durocher LL, Palazotto AN. A finite element analysis of deep beams with cutouts considering four supports Computers & Structures. 13: 537-546. DOI: 10.1016/0045-7949(81)90049-3 |
0.307 |
|
| 1980 |
Nelson DA, Palazotto AN. Parametric Study Relating to Buckling of Stringer Stiffened Cylindrical Shells with Cutouts Journal of Aircraft. 17: 272-274. DOI: 10.2514/3.57900 |
0.376 |
|
| 1980 |
Becker NL, Palazotto AN, Khot NS. INSTABILITY OF COMPOSITE PANELS Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 194-200. DOI: 10.1007/978-94-011-1228-4_11 |
0.361 |
|
| 1979 |
Witt WP, Palazotto AN, Hahn HT. Numerical and Experimental Comparison of the Notch Tip Stresses in a Laminated Plate Aiaa Journal. 17: 500-506. DOI: 10.2514/3.61161 |
0.373 |
|
| 1979 |
Schneider D, Palazotto AN. A technique for evaluating a unique set of three weibull parameters considering composite materials Fibre Science and Technology. 12: 269-281. DOI: 10.1016/0015-0568(79)90036-8 |
0.356 |
|
| 1978 |
Hannah SR, Palazotto AN. The incorporation of truncated fourier series into finite difference approximations of structural stability equations Computers and Structures. 9: 603-607. DOI: 10.1016/0045-7949(78)90011-1 |
0.329 |
|
| 1977 |
Palazotto AN. Bifurcation and collapse analysis of stringer and ring-stringer stiffened cylindrical shells with cutouts Computers and Structures. 7: 47-58. DOI: 10.1016/0045-7949(77)90059-1 |
0.333 |
|
| 1976 |
Durocher LL, Palazotto AN. SINGULARITY APPROACH TO CIRCULAR PLATES American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3439077 |
0.313 |
|
| 1973 |
Palazotto AN. An elastic-plastic buckling solution using the incremental theory International Journal of Mechanical Sciences. 15: 279-290. DOI: 10.1016/0020-7403(73)90010-6 |
0.397 |
|
| 1972 |
Palazotto AN, Seccombe DA. SPRINGBACK OF WIRE PRODUCTS CONSIDERING NATURAL STRAIN Asme Pap. DOI: 10.1115/1.3438230 |
0.316 |
|
| 1971 |
Palazotto AN, Morris NF. An elastic-plastic plane stress solution using the incremental theory International Journal of Mechanical Sciences. 13: 97-106. DOI: 10.1016/0020-7403(71)90014-2 |
0.358 |
|
| Show low-probability matches. |