| Year |
Citation |
Score |
| 2018 |
Zhao X, Venoor V, Koelling K, Cornish K, Vodovotz Y. Bio-based blends from poly(3-hydroxybutyrate-co
-3-hydroxyvalerate) and natural rubber for packaging applications Journal of Applied Polymer Science. 136: 47334. DOI: 10.1002/App.47334 |
0.353 |
|
| 2016 |
Modi SJ, Cornish K, Koelling KW, Vodovotz Y. Mechanical and Rheological Properties of PHBV Bioplastic Composites Engineered with Invasive Plant Fibers Transactions of the Asabe. 59: 1883-1891. DOI: 10.13031/Trans.59.11523 |
0.361 |
|
| 2016 |
Modi SJ, Cornish K, Koelling K, Vodovotz Y. Fabrication and improved performance of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) for packaging by addition of high molecular weight natural rubber Journal of Applied Polymer Science. DOI: 10.1002/App.43937 |
0.395 |
|
| 2013 |
Modi S, Koelling K, Vodovotz Y. Assessing the mechanical, phase inversion, and rheological properties of poly-[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (PHBV) blended with poly-(l-lactic acid) (PLA) European Polymer Journal. 49: 3681-3690. DOI: 10.1016/J.Eurpolymj.2013.07.036 |
0.379 |
|
| 2013 |
Yoo S, Holloman C, Tomasko D, Koelling K, Pascall MA. Effect of High Pressure Processing on the Thermal and Mechanical Properties of Polyethylene Films Measured by Dynamical Mechanical and Tensile Analyses Packaging Technology and Science. 27: 169-178. DOI: 10.1002/Pts.2021 |
0.331 |
|
| 2012 |
Boehm MW, Koelling KW. Analysis of a liquid-assisted molding process for coating microchannels with an ultraviolet curable polymer Polymer Engineering and Science. 52: 1590-1599. DOI: 10.1002/Pen.23093 |
0.446 |
|
| 2012 |
Guo Z, Burley AC, Koelling KW, Kusaka I, Lee LJ, Tomasko DL. CO 2 bubble nucleation in polystyrene: Experimental and modeling studies Journal of Applied Polymer Science. 125: 2170-2186. DOI: 10.1002/App.36422 |
0.318 |
|
| 2011 |
Kagarise C, Miyazono K, Mahboob M, Koelling KW, Bechtel SE. A constitutive model for characterization of shear and extensional rheology and flow induced orientation of carbon nanofiber/polystyrene melt composites Journal of Rheology. 55: 781-807. DOI: 10.1122/1.3579160 |
0.392 |
|
| 2011 |
Modi S, Koelling K, Vodovotz Y. Assessment of PHB with varying hydroxyvalerate content for potential packaging applications European Polymer Journal. 47: 179-186. DOI: 10.1016/J.Eurpolymj.2010.11.010 |
0.433 |
|
| 2011 |
Boehm MW, Sarker S, Koelling K. An experimental investigation of two-phase coating flow within microchannels: The effect of coating fluid rheology Microfluidics and Nanofluidics. 10: 1175-1183. DOI: 10.1007/S10404-010-0745-6 |
0.338 |
|
| 2011 |
Modi S, Koelling K, Vodovotz Y. Miscibility of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with high molecular weight poly(lactic acid) blends determined by thermal analysis Journal of Applied Polymer Science. 124: 3074-3081. DOI: 10.1002/App.35343 |
0.432 |
|
| 2011 |
Miyazono K, Kagarise CD, Koelling KW, Mahboob M, Bechtel SE. Shear and extensional rheology and flow-induced orientation of carbon nanofiber/polystyrene melt composites Journal of Applied Polymer Science. 119: 1940-1951. DOI: 10.1002/App.32923 |
0.41 |
|
| 2010 |
Kagarise C, Xu J, Wang Y, Mahboob M, Koelling KW, Bechtel SE. Transient shear rheology of carbon nanofiber/polystyrene melt composites Journal of Non-Newtonian Fluid Mechanics. 165: 98-109. DOI: 10.1016/J.Jnnfm.2009.10.005 |
0.519 |
|
| 2010 |
Mahboob M, Kagarise C, Koelling KW, Bechtel SE. Quantitative 3D measurement of the nanostructural features that dictate mesoscale performance properties of nanocomposites Polymer Composites. 31: 1495-1503. DOI: 10.1002/Pc.20935 |
0.349 |
|
| 2010 |
Feng L, Zhu B, Tomasko DL, Kusaka I, Koelling KW, Lee LJ. Production of polystyrene microcellular foam: Effect of molecular weight Annual Technical Conference - Antec, Conference Proceedings. 2: 1258-1261. |
0.315 |
|
| 2009 |
Mahboob M, Ahmadkhanlou F, Kagarise C, Washington G, Bechtel S, Koelling K. Predicting magnetorheological fluid flow behavior using a multiscale kinetic theory-based model Proceedings of Spie - the International Society For Optical Engineering. 7289. DOI: 10.1117/12.816133 |
0.31 |
|
| 2009 |
Shukla S, Koelling KW. Classical nucleation theory applied to homogeneous bubble nucleation in the continuous microcellular foaming of the polystyrene-co2 system Industrial and Engineering Chemistry Research. 48: 7603-7615. DOI: 10.1021/Ie8011243 |
0.421 |
|
| 2009 |
Wingert MJ, Shukla S, Koelling KW, Tomasko DL, Lee LJ. Shear viscosity of CO 2-plasticized polystyrene under high static pressures Industrial and Engineering Chemistry Research. 48: 5460-5471. DOI: 10.1021/Ie800896R |
0.357 |
|
| 2009 |
Tomasko DL, Burley A, Feng L, Yeh SK, Miyazono K, Nirmal-Kumar S, Kusaka I, Koelling K. Development of CO2 for polymer foam applications Journal of Supercritical Fluids. 47: 493-499. DOI: 10.1016/J.Supflu.2008.10.018 |
0.406 |
|
| 2008 |
Kagarise C, Koelling KW, Wang Y, Bechtel SE. A unified model for polystyrene-nanorod and polystyrene-nanoplatelet melt composites Rheologica Acta. 47: 1061-1076. DOI: 10.1007/S00397-008-0307-Y |
0.381 |
|
| 2008 |
Kagarise C, Mahboob M, Miyazono K, Bechtel SE, Koelling KW. Transient shear and extensional rheology and nanostructure of polymer nanocomposites Aiche Annual Meeting, Conference Proceedings. |
0.324 |
|
| 2007 |
Shukla S, Koelling KW. Steady flow simulation of a polymer-diluent solution through an abrupt axisymmetric contraction using internally consistent rheological scaling Journal of Applied Polymer Science. 106: 1053-1074. DOI: 10.1002/App.26664 |
0.465 |
|
| 2006 |
Xu J, Wang Y, Kagarise C, Koelling KW, Bechtel SE. Shear rheology of nanofiber suspensions and nanofiber/polymer melt composites Processing and Properties of Nanocomposites. 191-246. DOI: 10.1142/9789812772473_0005 |
0.338 |
|
| 2006 |
Kang K, Koelling KW, Lee LJ. Microdevice end pressure evaluations with Bagley correction Microfluidics and Nanofluidics. 2: 223-235. DOI: 10.1007/S10404-005-0067-2 |
0.325 |
|
| 2006 |
Wang Y, Xu J, Bechtel SE, Koelling KW. Melt shear rheology of carbon nanofiber/polystyrene composites Rheologica Acta. 45: 919-941. DOI: 10.1007/S00397-005-0077-8 |
0.554 |
|
| 2005 |
Xu J, Koelling KW. Temperature dependence of rheological behavior of a metallic automotive waterborne basecoat Progress in Organic Coatings. 53: 169-176. DOI: 10.1016/J.Porgcoat.2005.02.002 |
0.475 |
|
| 2005 |
Xu J, Chatterjee S, Koelling KW, Wang Y, Bechtel SE. Shear and extensional rheology of carbon nanofiber suspensions Rheologica Acta. 44: 537-562. DOI: 10.1007/S00397-005-0436-5 |
0.514 |
|
| 2005 |
Kang K, Lee LJ, Koelling KW. High shear microfluidics and its application in rheological measurement Experiments in Fluids. 38: 222-232. DOI: 10.1007/S00348-004-0901-4 |
0.429 |
|
| 2005 |
Xu G, Yu L, Lee LJ, Koelling KW. Experimental and numerical studies of injection molding with microfeatures Polymer Engineering and Science. 45: 866-875. DOI: 10.1002/Pen.20341 |
0.539 |
|
| 2005 |
Wingert MJ, Shen J, Davis PM, Lee LJ, Tomasko DL, Koelling KW. Rheological studies of polymers under high pressure carbon dioxide Annual Technical Conference - Antec, Conference Proceedings. 3: 291-295. |
0.333 |
|
| 2005 |
Wang Y, Xu J, Kagarise C, Bechtel SE, Koelling KW. Measuring and modeling of flow-induced nanostructure of nanoclay/polymer and nanofiber/polymer melt composites Aiche Annual Meeting, Conference Proceedings. 4956. |
0.303 |
|
| 2005 |
Kumar SKN, Shukla SR, Koelling KW. Foaming of Ps/clay nanocomposites in supercritical carbon dioxide Aiche Annual Meeting, Conference Proceedings. 1283. |
0.358 |
|
| 2004 |
Yang Y, Lee LJ, Koelling KW. Structure evolution in polymer blending using microfabricated samples Polymer. 45: 1959-1969. DOI: 10.1016/J.Polymer.2004.01.015 |
0.441 |
|
| 2004 |
Tomasko DL, Han X, Liu D, Gao W, Koelling KW, James Lee L. Erratum to “Supercritical fluid applications in polymer nanocomposites” [Current Opinion in Solid State & Materials Science 2003; 7(4–5): 407–12] Current Opinion in Solid State and Materials Science. 8: 323. DOI: 10.1016/J.Cossms.2004.04.002 |
0.548 |
|
| 2004 |
Garcia JL, Koelling KW, Xu G, Summers JW. PVC degradation during injection molding: Experimental evaluation Journal of Vinyl and Additive Technology. 10: 17-40. DOI: 10.1002/Vnl.20004 |
0.397 |
|
| 2004 |
Yu L, Lee LJ, Koelling KW. Flow and heat transfer simulation of injection molding with microstructures Polymer Engineering and Science. 44: 1866-1876. DOI: 10.1002/Pen.20188 |
0.544 |
|
| 2004 |
Garcia JL, Koelling KW, Summers JW. Computational prediction of PVC degradation during injection molding in a rectangular channel Polymer Engineering and Science. 44: 1295-1312. DOI: 10.1002/Pen.20125 |
0.366 |
|
| 2004 |
Kang K, Koelling K. Void transport in resin transfer molding Polymer Composites. 25: 417-432. DOI: 10.1002/Pc.20035 |
0.4 |
|
| 2004 |
Han X, Zeng C, Wingert MJ, Lee LJ, Koelling KW, Tomasko DL. Effect of clay surface modification on the polymer nanocomposite foam structure Annual Technical Conference - Antec, Conference Proceedings. 2: 1723-1727. |
0.302 |
|
| 2004 |
Yu L, Garcia JL, Xu G, Koelling KW, Summers JW. Computational prediction of PVC degradation during injection molding radial flow Annual Technical Conference - Antec, Conference Proceedings. 1: 645-649. |
0.308 |
|
| 2003 |
Tomasko DL, Li H, Liu D, Han X, Wingert MJ, Lee LJ, Koelling KW. A Review of CO2Applications in the Processing of Polymers Industrial & Engineering Chemistry Research. 42: 6431-6456. DOI: 10.1021/Ie030199Z |
0.579 |
|
| 2003 |
Han X, Zeng C, Lee LJ, Koelling KW, Tomasko DL. Extrusion of polystyrene nanocomposite foams with supercritical CO2 Polymer Engineering & Science. 43: 1261-1275. DOI: 10.1002/Pen.10107 |
0.552 |
|
| 2003 |
Han X, Koelling KW, Tomasko DL, Lee LJ. Effect of Die Temperature on the Morphology of Microcellular Foams Polymer Engineering and Science. 43: 1206-1220. DOI: 10.1002/Pen.10102 |
0.535 |
|
| 2003 |
Zeng C, Han X, Lee LJ, Koelling KW, Tomasko DL. Polymer-Clay Nanocomposite Foams Prepared Using Carbon Dioxide Advanced Materials. 15: 1743-1747. DOI: 10.1002/Adma.200305065 |
0.571 |
|
| 2003 |
Wingert MJ, Han X, Zeng C, Li H, Lee LJ, Tomasko DL, Koelling KW. Rheological changes in Co2 impregnated polystyrene reinforced with nanoclays Annual Technical Conference - Antec, Conference Proceedings. 1: 986-991. |
0.301 |
|
| 2003 |
Han X, Zeng C, Koelling KW, Tomasko DL, Lee LJ. Extrusion of polystyrene foams reinforced with nano-clays Annual Technical Conference - Antec, Conference Proceedings. 2: 1732-1734. |
0.312 |
|
| 2003 |
Tomasko DL, Li H, Liu D, Han X, Wingert MJ, Lee LJ, Koelling KW. A Review of CO2 Applications in the Processing of Polymers Industrial and Engineering Chemistry Research. 42: 6431-6456. |
0.306 |
|
| 2002 |
Ma N, Koelling KW, Chalmers JJ. Fabrication and use of a transient contractional flow device to quantify the sensitivity of mammalian and insect cells to hydrodynamic forces. Biotechnology and Bioengineering. 80: 428-37. PMID 12325151 DOI: 10.1002/Bit.10387 |
0.322 |
|
| 2002 |
Lai S, Lee LJ, Yu L, Koelling KW, Madou MJ. Micro- and nano-fabrication of polymer based microfluidic platforms for BioMEMS applications Materials Research Society Symposium - Proceedings. 729: 17-27. DOI: 10.1557/Proc-729-U1.7 |
0.559 |
|
| 2002 |
Han X, Koelling KW, Tomasko DL, Lee LJ. Continuous microcellular polystyrene foam extrusion with supercritical CO2 Polymer Engineering and Science. 42: 2094-2106. DOI: 10.1002/Pen.11100 |
0.535 |
|
| 2002 |
Yu L, Koh CG, James Lee L, Koelling KW, Madou MJ. Experimental investigation and numerical simulation of injection molding with micro-features Polymer Engineering and Science. 42: 871-888. DOI: 10.1002/Pen.10998 |
0.562 |
|
| 2002 |
Juang YJ, Lee James L, Koelling KW. Hot embossing in microfabrication. Part II: Rheological characterization and process analysis Polymer Engineering and Science. 42: 551-566. DOI: 10.1002/Pen.10971 |
0.667 |
|
| 2002 |
Juang YJ, Lee James L, Koelling KW. Hot embossing in microfabrication. Part I: Experimental Polymer Engineering and Science. 42: 539-550. DOI: 10.1002/Pen.10970 |
0.647 |
|
| 2002 |
Xu G, Qiao J, Kuswanti C, Koelling K, Stuart JA, Lilly B. Characterization of virgin and postconsumer blended high-impact polystyrene resins for injection molding Journal of Applied Polymer Science. 84: 1-8. DOI: 10.1002/App.2339 |
0.379 |
|
| 2001 |
Lee LJ, Madou MJ, Koelling KW, Daunert S, Lai S, Koh CG, Juang YJ, Lu Y, Yu L. Design and fabrication of CD-like microfluidic platforms for diagnostics: Polymer-based microfabrication Biomedical Microdevices. 3: 339-351. DOI: 10.1023/A:1012469017354 |
0.657 |
|
| 2001 |
Bechtel SE, Youssef NT, Gregory Forest M, Zhou H, Koelling KW. Non-Newtonian viscous oscillating free surface jets, and a new strain-rate dependent viscosity form for flows experiencing low strain rates Rheologica Acta. 40: 373-383. DOI: 10.1007/S003970000152 |
0.319 |
|
| 2001 |
Wang H, Zeng C, Elkovitch M, Lee LJ, Koelling KW. Processing and properties of polymeric nano-composites Polymer Engineering and Science. 41: 2036-2046. DOI: 10.1002/Pen.10899 |
0.449 |
|
| 2001 |
Juang YJ, Lee LJ, Koelling KW. Rheological analysis of polyvinyl butyral near the glass transition temperature Polymer Engineering and Science. 41: 275-292. DOI: 10.1002/Pen.10727 |
0.475 |
|
| 2001 |
Juang YJ, Bruer D, James Lee L, Koelling KW, Srinivasan N, Drummond CH, Wong BC. A method for assessing the effect of polymer sheeting rheology, surface pattern, and processing conditions on glass lamination Journal of Applied Polymer Science. 80: 521-528. DOI: 10.1002/1097-4628(20010425)80:4<521::Aid-App1126>3.0.Co;2-K |
0.614 |
|
| 2000 |
Gregoriades N, Clay J, Ma N, Koelling K, Chalmers JJ. Cell damage of microcarrier cultures as a function of local energy dissipation created by a rapid extensional flow. Biotechnology and Bioengineering. 69: 171-82. PMID 10861396 DOI: 10.1002/(Sici)1097-0290(20000720)69:2<171::Aid-Bit6>3.0.Co;2-C |
0.302 |
|
| 1999 |
Gauri V, Koelling KW. Gas-assisted displacement of viscoelastic fluids: Flow dynamics at the bubble front Journal of Non-Newtonian Fluid Mechanics. 83: 183-203. DOI: 10.1016/S0377-0257(98)00071-8 |
0.363 |
|
| 1999 |
Gauri V, Koelling KW. The motion of long bubbles through viscoelastic fluids in capillary tubes Rheologica Acta. 38: 458-470. DOI: 10.1007/S003970050197 |
0.404 |
|
| 1998 |
Agarwal M, Koelling KW, Chalmers JJ. Characterization of the degradation of polylactic acid polymer in a solid substrate environment. Biotechnology Progress. 14: 517-26. PMID 9622536 DOI: 10.1021/Bp980015P |
0.409 |
|
| 1998 |
Garcia JL, Koelling KW, Seghi RR. Mechanical and wear properties of polymethylmethacrylate and polyvinylidene fluoride blends Polymer. 39: 1559-1567. DOI: 10.1016/S0032-3861(97)00498-9 |
0.361 |
|
| 1997 |
Ramanan VV, Bechtel SE, Gauri V, Koelling KW, Forest MG. Exploiting accurate spinline measurements for elongational material characterization Journal of Rheology. 41: 283-306. DOI: 10.1122/1.550856 |
0.37 |
|
| 1997 |
Huzyak PC, Koelling KW. The penetration of a long bubble through a viscoelastic fluid in a tube Journal of Non-Newtonian Fluid Mechanics. 71: 73-88. DOI: 10.1016/S0377-0257(97)00002-5 |
0.335 |
|
| 1997 |
Gauri V, Koelling KW. Extensional rheology of concentrated poly(ethylene oxide) solutions Rheologica Acta. 36: 555-567. DOI: 10.1007/Bf00368133 |
0.388 |
|
| 1997 |
Clay JD, Koelling KW. Molecular degradation of concentrated polystyrene solutions in a fast transient extensional flow Polymer Engineering and Science. 37: 789-800. DOI: 10.1002/Pen.11722 |
0.38 |
|
| 1991 |
Koelling KW, Prud'homme RK. Instabilities in multi-hole converging flow of viscoelastic fluids Rheologica Acta. 30: 511-522. DOI: 10.1007/Bf00444369 |
0.311 |
|
| Show low-probability matches. |