Year |
Citation |
Score |
2020 |
Babanezhad K, Aidibe A, Foucault G, Tahan A, Bigeon J. Improved Bi-Criterion Flexible Registration for Fixtureless Inspection of Compliant Parts Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 65: 116-129. DOI: 10.1016/J.Precisioneng.2020.05.006 |
0.376 |
|
2020 |
Zongo F, Simoneau C, Timercan A, Tahan A, Brailovski V. Geometric deviations of laser powder bed–fused AlSi10Mg components: numerical predictions versus experimental measurements The International Journal of Advanced Manufacturing Technology. 107: 1411-1436. DOI: 10.1007/S00170-020-04987-7 |
0.303 |
|
2019 |
Jbira I, Tahan A, Bonsaint S, Mahjoub MA, Louhichi B. Reproducibility Experimentation among Computer-Aided Inspection Software from a Single Point Cloud Journal of Control Science and Engineering. 2019: 1-10. DOI: 10.1155/2019/9140702 |
0.337 |
|
2019 |
Nassar M, Guizani L, Nollet M, Tahan A. A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions Engineering Structures. 197: 109353. DOI: 10.1016/J.Engstruct.2019.109353 |
0.322 |
|
2019 |
Ibrahim MH, Aidibe A, Mahjoub MA, Tahan A, Louhichi B. A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology The International Journal of Advanced Manufacturing Technology. 103: 409-422. DOI: 10.1007/S00170-019-03554-Z |
0.357 |
|
2019 |
Proteau A, Tahan A, Thomas M. Specific cutting energy: a physical measurement for representing tool wear The International Journal of Advanced Manufacturing Technology. 103: 101-110. DOI: 10.1007/S00170-019-03533-4 |
0.339 |
|
2018 |
Blancke O, Tahan A, Komljenovic D, Amyot N, Lévesque M, Hudon C. A holistic multi-failure mode prognosis approach for complex equipment Reliability Engineering & System Safety. 180: 136-151. DOI: 10.1016/J.Ress.2018.07.006 |
0.329 |
|
2018 |
Berdai M, Tahan A, Gagnon M. A comparison between aggregation before and after propagation based on a reliability model Information Sciences. 453: 99-110. DOI: 10.1016/J.Ins.2018.04.005 |
0.335 |
|
2018 |
Aghazadeh F, Tahan A, Thomas M. Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process The International Journal of Advanced Manufacturing Technology. 98: 3217-3227. DOI: 10.1007/S00170-018-2420-0 |
0.351 |
|
2017 |
Cambron P, Tahan A, Masson C, Pelletier F. Bearing temperature monitoring of a Wind Turbine using physics-based model Journal of Quality in Maintenance Engineering. 23: 479-488. DOI: 10.1108/Jqme-06-2016-0028 |
0.372 |
|
2017 |
Jbira I, Tlija M, Louhichi B, Tahan A. CAD/Tolerancing integration: Mechanical assembly with form defects Advances in Engineering Software. 114: 312-324. DOI: 10.1016/J.Advengsoft.2017.07.010 |
0.367 |
|
2017 |
Touazine H, Akab J, Jahazi M, Tahan A, Jomaa W, Bocher P. Modeling of the microstructure alteration induced by hard turning of Inconel 718 The International Journal of Advanced Manufacturing Technology. 93: 3705-3712. DOI: 10.1007/S00170-017-0787-Y |
0.341 |
|
2016 |
Cambron P, Lepvrier R, Masson C, Tahan A, Pelletier F. Power curve monitoring using weighted moving average control charts Renewable Energy. 94: 126-135. DOI: 10.1016/J.Renene.2016.03.031 |
0.347 |
|
2016 |
Aidibe A, Nejad MK, Tahan A, Jahazi M, Cloutier SG. A Proposition for New Quality 3D Indexes to Measure Surface Roughness Procedia Cirp. 46: 327-330. DOI: 10.1016/J.Procir.2016.03.136 |
0.307 |
|
2016 |
Aidibe A, Tahan A, Brailovski V. Metrological Investigation of a Selective Laser Melting Additive Manufacturing System: A Case Study Ifac-Papersonline. 49: 25-29. DOI: 10.1016/J.Ifacol.2016.12.156 |
0.308 |
|
2016 |
Aidibe A, Nejad MK, Tahan A, Jahazi M, Cloutier SG. Surface characterization of die inserts used for LED lamp plastic lenses International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-9038-X |
0.321 |
|
2015 |
Kedadouche M, Thomas M, Tahan A, Guilbault R. Nonlinear Parameters for Monitoring Gear: Comparison between Lempel-Ziv, Approximate Entropy, and Sample Entropy Complexity Shock and Vibration. 2015. DOI: 10.1155/2015/959380 |
0.354 |
|
2015 |
Kedadouche M, Thomas M, Tahan A. A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages Mechanics and Industry. 16. DOI: 10.1051/Meca/2015030 |
0.335 |
|
2015 |
Aidibe A, Tahan A. The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts Procedia Cirp. 27: 84-89. DOI: 10.1016/J.Procir.2015.04.048 |
0.399 |
|
2015 |
Louhichi B, Tlija M, Benamara A, Tahan A. An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances Cad Computer Aided Design. 62: 259-274. DOI: 10.1016/J.Cad.2014.07.002 |
0.339 |
|
2015 |
Aidibe A, Tahan A. Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts International Journal of Advanced Manufacturing Technology. 79: 831-841. DOI: 10.1007/S00170-015-6832-9 |
0.309 |
|
2014 |
Kedadouche M, Thomas M, Tahan A. Monitoring machines by using a hybrid method combining MED, EMD, and TKEO Advances in Acoustics and Vibration. DOI: 10.1155/2014/592080 |
0.338 |
|
2014 |
Kedadouche M, Thomas M, Tahan A. Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects Mechanics and Industry. 15: 467-476. DOI: 10.1051/Meca/2014061 |
0.304 |
|
2014 |
Kedadouche M, Thomas M, Tahan A. A comparative study between Empirical Wavelet Transforms and Empirical Mode Decomposition Methods: Application to bearing defect diagnosis Mechanical Systems and Signal Processing. DOI: 10.1016/J.Ymssp.2016.02.049 |
0.329 |
|
2014 |
Gagnon M, Tahan A, Bocher P, Thibault D. Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study Structural Safety. 50: 1-8. DOI: 10.1016/J.Strusafe.2014.03.008 |
0.33 |
|
2014 |
Aidibe A, Tahan A. The inspection of deformable bodies using curvature estimation and Thompson-Biweight test International Journal of Advanced Manufacturing Technology. 71: 1733-1747. DOI: 10.1007/S00170-013-5540-6 |
0.384 |
|
2013 |
Gagnon M, Tahan A, Bocher P, Thibault D. On the fatigue reliability of hydroelectric Francis runners Procedia Engineering. 66: 565-574. DOI: 10.1016/J.Proeng.2013.12.108 |
0.346 |
|
2013 |
Gagnon M, Tahan A, Bocher P, Thibault D. A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner International Journal of Fatigue. 47: 300-307. DOI: 10.1016/J.Ijfatigue.2012.09.011 |
0.312 |
|
2013 |
Corriveau G, Guilbault R, Tahan A, Sabourin R. Review of phenotypic diversity formulations for diagnostic tool Applied Soft Computing Journal. 13: 9-26. DOI: 10.1016/J.Asoc.2012.08.046 |
0.365 |
|
2012 |
Gagnon M, Tahan A, Bocher P, Thibault D. On the stochastic simulation of hydroelectric turbine blades transient response Mechanical Systems and Signal Processing. 32: 178-187. DOI: 10.1016/J.Ymssp.2012.02.006 |
0.318 |
|
2012 |
Abenhaim GN, Desrochers A, Tahan A. Nonrigid parts' specification and inspection methods: Notions, challenges, and recent advancements International Journal of Advanced Manufacturing Technology. 63: 741-752. DOI: 10.1007/S00170-012-3929-2 |
0.347 |
|
2010 |
Corriveau G, Guilbault R, Tahan A. Genetic algorithms and finite element coupling for mechanical optimization Advances in Engineering Software. 41: 422-426. DOI: 10.1016/J.Advengsoft.2009.03.008 |
0.322 |
|
2008 |
Lacasse L, Tahan A, Liu Z. Robust method for the automatic characterization of a wooden board's geometrical state Quality Engineering. 20: 221-231. DOI: 10.1080/08982110701733042 |
0.368 |
|
Show low-probability matches. |