Mohsen Kolivand, Ph.D.
Affiliations: | 2009 | Ohio State University, Columbus, Columbus, OH |
Area:
Mechanical EngineeringGoogle:
"Mohsen Kolivand"Parents
Sign in to add mentorAhmet Kahraman | grad student | 2009 | Ohio State | |
(Development of tooth contact and mechanical efficiency models for face -milled and face -hobbed hypoid and spiral bevel gears.) |
BETA: Related publications
See more...
Publications
You can help our author matching system! If you notice any publications incorrectly attributed to this author, please sign in and mark matches as correct or incorrect. |
Kolivand M, Ligata H, Steyer G, et al. (2015) Actual tooth contact analysis of straight bevel gears Journal of Mechanical Design, Transactions of the Asme. 137 |
Park D, Kolivand M, Kahraman A. (2014) An approximate method to predict surface wear of hypoid gears using surface interpolation Mechanism and Machine Theory. 71: 64-78 |
Artoni A, Gabiccini M, Kolivand M. (2013) Ease-off based compensation of tooth surface deviations for spiral bevel and hypoid gears: Only the pinion needs corrections Mechanism and Machine Theory. 61: 84-101 |
Park D, Kolivand M, Kahraman A. (2012) Prediction of surface wear of hypoid gears using a semi-analytical contact model Mechanism and Machine Theory. 52: 180-194 |
Kolivand M, Kahraman A. (2011) A general approach to locate instantaneous contact lines of gears using surface of roll angle Journal of Mechanical Design, Transactions of the Asme. 133 |
Artoni A, Kolivand M, Kahraman A. (2010) An ease-off based optimization of the loaded transmission error of hypoid gears Journal of Mechanical Design, Transactions of the Asme. 132: 0110101-0110109 |
Kolivand M, Li S, Kahraman A. (2010) Prediction of mechanical gear mesh efficiency of hypoid gear pairs Mechanism and Machine Theory. 45: 1568-1582 |
Kolivand M, Kahraman A. (2009) An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations Proceedings of the Asme Design Engineering Technical Conference. 6: 245-254 |
Kolivand M, Kahraman A. (2009) A load distribution model for hypoid gears using ease-off topography and shell theory Mechanism and Machine Theory. 44: 1848-1865 |
Masseth J, Kolivand M. (2008) Lapping and superfinishing effects on hypoid gears surface finish and transmission errors 2007 Proceedings of the Asme International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Detc2007. 7: 759-765 |