Timothy C. Kennedy - Publications

Affiliations: 
Mechanical Engineering Oregon State University, Corvallis, OR 
Area:
composite materials

60 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2012 Parmigiani JP, Kennedy TC, Wright TJ. Mesh dependency in progressive failure modeling of notched laminates under out-of-plane bending Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference 0.52
2012 Wright TJ, Parmigiani JP, Kennedy TC. Implicit versus explicit approaches to FEA modeling of notched composite panels International Sampe Technical Conference 0.52
2009 Park KN, Lee JM, Youn YJ, June HK, Ahn SH, Lee KH, Kim YK, Kennedy TC. The assembly and test of pressure vessel for irradiation Transactions of the Korean Society of Mechanical Engineers, A. 33: 179-184. DOI: 10.3795/KSME-A.2009.33.2.179  0.52
2009 Kennedy TC, Arias SG. Strain concentrations in notched laminates under bending Aircraft Engineering and Aerospace Technology. 81: 221-225. DOI: 10.1108/00022660910954727  0.52
2008 Byers T, Wolf HJ, Franklin WA, Braudrick S, Merrick DT, Shroyer KR, Hirsch FR, Zeng C, Barón AE, Bunn PA, Miller YE, Kennedy TC. Sputum cytologic atypia predicts incident lung cancer: defining latency and histologic specificity. Cancer Epidemiology, Biomarkers & Prevention : a Publication of the American Association For Cancer Research, Cosponsored by the American Society of Preventive Oncology. 17: 158-62. PMID 18199720 DOI: 10.1158/1055-9965.EPI-07-0436  0.52
2006 Kennedy TC, Plengsaard C, Harder RF. Transient heat partition factor for a sliding railcar wheel Wear. 261: 932-936. DOI: 10.1016/j.wear.2006.01.016  0.52
2005 Merrick DT, Haney J, Petrunich S, Sugita M, Miller YE, Keith RL, Kennedy TC, Franklin WA. Overexpression of vascular endothelial growth factor and its receptors in bronchial dypslasia demonstrated by quantitative RT-PCR analysis. Lung Cancer (Amsterdam, Netherlands). 48: 31-45. PMID 15777969 DOI: 10.1016/j.lungcan.2004.07.049  0.52
2005 Kennedy TC, Traiviratana S. Transient effects on heat conduction in sliding bodies Numerical Heat Transfer; Part a: Applications. 47: 57-77. DOI: 10.1080/10407780490520788  0.52
2005 Shin IS, Han SY, Park JY, Kennedy TC. Topology optimization of the inner reinforcement for a vehicle's hood using evolutionary procedure Proceedings of the Asme International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - Detc2005. 4: 635-640.  0.52
2005 Beddek R, ElMahdi A, Barnett B, Kennedy T. Integration of groundwater models within an economical decision support system framework Modsim05 - International Congress On Modelling and Simulation: Advances and Applications For Management and Decision Making, Proceedings. 608-614.  0.52
2003 Kennedy TC, Puttapitukporn T, Kassner ME. Dynamic effects on cavitation instabilities in solids Acta Mechanica. 165: 73-85. DOI: 10.1007/s00707-003-0036-3  0.52
2002 Kennedy TC, Cho MH, Kassner ME. Predicting failure of composite structures containing cracks Composites - Part a: Applied Science and Manufacturing. 33: 583-588. DOI: 10.1016/S1359-835X(01)00145-2  0.52
2000 Kennedy TC, Miller Y, Prindiville S. Screening for lung cancer revisited and the role of sputum cytology and fluorescence bronchoscopy in a high-risk group. Chest. 117: 72S-79S. PMID 10777459  0.52
2000 Nahan M, Kennedy T. Nonlocal damage theory for laminated plate with application to aircraft damage tolerance Journal of Reinforced Plastics and Composites. 19: 354-363. DOI: 10.1106/GVQ2-4HE9-H86B-M375  0.52
2000 Schrems KK, Kassner ME, Kennedy TC. Theoretical, experimental and computational mechanics of fracture in constrained interlayers Experimental Mechanics. 40: 307-311.  0.52
1999 Kennedy TC. Modeling failure in notched plates with micropolar strain softening Composite Structures. 44: 71-79. DOI: 10.1016/S0263-8223(98)00127-5  0.52
1999 Kassner ME, Kennedy TC, Schrems KK. The mechanism of ductile fracture in constrained thin films Materials Research Society Symposium - Proceedings. 539: 263-268.  0.52
1998 Kennedy TC. Nonlinear viscoelastic analysis of composite plates and shells Composite Structures. 41: 265-272. DOI: 10.1016/S0263-8223(98)00025-7  0.52
1998 Kassner ME, Kennedy TC, Schrems KK. The mechanism of ductile fracture in constrained thin silver films Acta Materialia. 46: 6445-6457.  0.52
1997 Kennedy TC, Nahan MF. A simple nonlocal damage model for predicting failure in a composite shell containing a crack Composite Structures. 39: 85-91.  0.52
1997 Roehnelt R, Kassner ME, Kennedy TC, Rosen RS. Elastic incompatibility stresses across planar and nonplanar grain boundaries applied to ductile fracture criteria under high triaxial stress Scripta Materialia. 36: 605-610.  0.52
1996 Kennedy TC, Nahan MF. A simple nonlocal damage model for predicting failure of notched laminates Composite Structures. 35: 229-236. DOI: 10.1016/0263-8223(96)00040-2  0.52
1996 Wada H, Seika M, Kennedy TC, Calder CA, Murase K. Investigation of loading rate and plate thickness effects on dynamic fracture toughness of PMMA Engineering Fracture Mechanics. 54: 805-811. DOI: 10.1016/0013-7944(95)00244-8  0.52
1995 Laird G, Kennedy TC. Micromechanics of composite materials under compressive loading Engineering Fracture Mechanics. 51: 417-430. DOI: 10.1016/0013-7944(94)00268-M  0.52
1995 Laird G, Kennedy TC. Poisson's ratio and the interfacial behaviour of composite materials Composites. 26: 887-889. DOI: 10.1016/0010-4361(95)90882-Z  0.52
1995 Laird G, Epstein JS, Kennedy TC. Micromechanics of a model heterogeneous material system under compressive loading Experimental Mechanics. 35: 293-305. DOI: 10.1007/BF02317538  0.52
1994 Laird G, Kennedy TC. Micromechanics of imperfect interfaces in heterogeneous materials Composites. 25: 593-603. DOI: 10.1016/0010-4361(94)90189-9  0.52
1994 Kennedy TC. Application of composite fracture models to coated fabrics Journal of Coated Fabrics. 24: 129-137.  0.52
1994 Kennedy TC, Wang M. Three-dimensional, nonlinear viscoelastic analysis of laminated composites Journal of Composite Materials. 28: 902-925.  0.52
1993 Kennedy TC, Laird G. Three-dimensional micromechanical analysis of cracks in a ceramic composite Finite Elements in Analysis and Design. 13: 237-248. DOI: 10.1016/0168-874X(93)90041-N  0.52
1993 Wada H, Seika M, Calder CA, Kennedy TC. Measurement of impact fracture toughness for PMMA with single-point bending test using an air gun Engineering Fracture Mechanics. 46: 715-719. DOI: 10.1016/0013-7944(93)90178-U  0.52
1993 Kennedy TC, Kim JB. Dynamic analysis of cracks in micropolar elastic materials Engineering Fracture Mechanics. 44: 207-216. DOI: 10.1016/0013-7944(93)90045-T  0.52
1992 Kennedy TC, Kim JB. Dynamic stress concentrations in micropolar elastic materials Computers and Structures. 45: 53-60. DOI: 10.1016/0045-7949(92)90344-Y  0.52
1991 Laird G, Kennedy TC. Crack wake toughening mechanisms in a whisker-reinforced ceramic Finite Elements in Analysis and Design. 9: 113-124. DOI: 10.1016/0168-874X(91)90054-3  0.52
1991 Laird G, Kennedy TC. The role of interfacial cohesion of the micromechanics of composites containing spherical inclusions Journal of Materials Science Letters. 10: 772-773. DOI: 10.1007/BF00723276  0.52
1991 Han SY, Narasimhan MNL, Kennedy TC. Dynamic crack propagation in a micropolar medium Mechanical and Corrosion Properties. Series a, Key Engineering Materials. 51: 343-348.  0.52
1990 Han SY, Narasimhan MNL, Kennedy TC. Dynamic propagation of a finite crack in a micropolar elastic solid Acta Mechanica. 85: 179-191. DOI: 10.1007/BF01181516  0.52
1990 Laird G, Kennedy TC. Three-dimensional finite element analysis of a crack in a ceramic composite . 233-241.  0.52
1989 Han SY, Narasimhan MNL, Kennedy TC. Finite crack propagation in a micropolar elastic solid Ksme Journal. 3: 103-112. DOI: 10.1007/BF02953595  0.52
1989 Laird G, Kennedy TC. Crack wake toughening mechanisms in a wisker-reinforced ceramic . 13.24-13.40.  0.52
1989 Kennedy TC, Laird G. Effect of fiber properties on fracture strength in continuous-fiber ceramic composites Computers in Engineering, Proceedings of the International Computers in Engineering Conference and Exhibit. 291-296.  0.52
1988 Kennedy TC, Wang M. Finite element analysis of cracks in ceramic composites . 121-125.  0.52
1988 Kennedy TC, Wang M. Micromechanical analysis of short cracks in fiber-reinforced ceramics Journal of the American Ceramic Society. 71: 490-491.  0.52
1987 Kennedy TC, Kim JB. FINITE ELEMENT ANALYSIS OF A CRACK IN A MICROPOLAR ELASTIC MATERIAL Computers in Engineering, Proceedings of the International Computers in Engineering Conference And. 3: 439-444.  0.52
1986 Ilcewicz LB, Shaar C, Kennedy TC, Wilson JB. Experimental evidence of a relationship between ultrasonic wave dispersion and fracture Engineering Fracture Mechanics. 24: 895-908. DOI: 10.1016/0013-7944(86)90274-2  0.52
1985 Ilcewicz LB, Kennedy TC, Shaar C. Experimental application of a generalized continuum model to nondestructive testing Journal of Materials Science Letters. 4: 434-438. DOI: 10.1007/BF00719738  0.52
1985 George TL, Kennedy TC, Peddicord KL. ELASTIC STRESS-STRAIN RELATION FOR SPHERE ARRAYS UNDERGOING INITIAL STAGE SINTERING Journal of Applied Mechanics, Transactions Asme. 52: 98-104.  0.52
1984 Peddicord KL, George TL, Kennedy TC. MODEL FOR THE THERMAL-MECHANICAL BEHAVIOR OF MIXED-CARBIDE SPHERE-PAC FUEL PINS Nuclear Science and Engineering. 86: 253-266.  0.52
1983 Kennedy TC, George TL, Peddicord KL. Thermoplastic analysis of a sphere-pac fuel pin Nuclear Engineering and Design. 75: 57-65. DOI: 10.1016/0029-5493(83)90078-X  0.52
1982 George TL, Kennedy TC, Peddicord KL. ELASTIC STRESS-STRAIN RELATION FOR RESTRUCTURING SPHERE-PAC FUEL Transactions of the American Nuclear Society. 43: 343-344.  0.52
1979 Senseny PE, Lindberg HE, Kennedy TC. A machine for static and dynamic triaxial testing - A versatile machine has been developed to test geological specimens large enough (0.3-m diameter) to allow modeling of joint systems and of tunnels with instrumented tunnel-reinforcement models Experimental Mechanics. 19: 63-68. DOI: 10.1007/BF02324527  0.52
1979 Senseny PE, Lindberg HE, Kennedy TC. MACHINE FOR STATIC AND DYNAMIC TRIAXIAL TESTING Paper - Sesa (Society For Experimental Stress Analysis) 0.52
1978 Kennedy TC, Lindberg HE. TUNNEL CLOSURE FOR NONLINEAR MOHR-COULOMB FUNCTIONS Asce J Eng Mech Div. 104: 1313-1326.  0.52
1978 Kennedy TC, Lindberg HE. MODEL TESTS FOR PLASTIC RESPONSE OF LINED TUNNELS Asce J Eng Mech Div. 104: 399-420.  0.52
1975 Lindberg HE, Kennedy TC. DYNAMIC PLASTIC PULSE BUCKLING BEYOND STRAIN-RATE REVERSAL Journal of Applied Mechanics, Transactions Asme. 42: 411-416.  0.52
1974 Kennedy TC, Achenbach JD. Rapid extension of a penny-shaped crack under torsion International Journal of Solids and Structures. 10: 519-530. DOI: 10.1016/0020-7683(74)90056-0  0.52
1974 Kennedy TC, Herrmann G. RESPONSE OF A FLUID-SOLID INTERFACE TO A MOVING DISTURBANCE Journal of Applied Mechanics, Transactions Asme. 41: 287-288.  0.52
1973 Kennedy TC, Achenbach JD. Extension of a cut-induced crack under antiplane loading Journal of Elasticity. 3: 277-288. DOI: 10.1007/BF00045743  0.52
1973 Kennedy TC, Herrmann G. MOVING LOAD ON A FLUID-SOLID INTERFACE: SUBSONIC AND INTERSONIC REGIMES Journal of Applied Mechanics, Transactions Asme. 40: 885-890.  0.52
1973 Kennedy TC, Herrmann G. MOVING LOAD ON A FLUID-SOLID INTERFACE: SUPERSONIC REGIME Journal of Applied Mechanics, Transactions Asme. 40: 137-142.  0.52
Show low-probability matches.