Year |
Citation |
Score |
2017 |
Adharapurapu RR, Vecchio KS. Effects of aging and cooling rate on the transformation of nanostructured Ti-50.8Ni Journal of Alloys and Compounds. 693: 150-163. DOI: 10.1016/J.Jallcom.2016.09.112 |
0.534 |
|
2014 |
Adharapurapu RR, Zhu J, Dheeradhada VS, Lipkin DM, Pollock TM. Effective Hf-Pd Co-doped β-NiAl(Cr) coatings for single-crystal superalloys Acta Materialia. 76: 449-462. DOI: 10.1016/J.Actamat.2014.03.001 |
0.519 |
|
2014 |
Adharapurapu RR, Zhu J, Dheeradhada VS, Lipkin DM, Pollock TM. A combinatorial investigation of palladium and platinum additions to β-NiAl overlay coatings Acta Materialia. 77: 379-393. DOI: 10.1016/J.Actamat.2014.02.030 |
0.535 |
|
2011 |
Kumar A, Adharapurapu RR, Jones JW, Pollock TM. In situ damage assessment in a cast magnesium alloy during very high cycle fatigue Scripta Materialia. 64: 65-68. DOI: 10.1016/J.Scriptamat.2010.09.008 |
0.628 |
|
2011 |
Adharapurapu RR, Kumar D, Zhu J, Pollock TM. Carburization of W- and Re-rich Ni-based alloys in impure helium at 1000°C Corrosion Science. 53: 388-398. DOI: 10.1016/J.Corsci.2010.09.049 |
0.572 |
|
2011 |
Kumar D, Adharapurapu RR, Pollock TM, Was GS. High-temperature oxidation of alloy 617 in helium containing part-per-million levels of CO and CO2 as impurities Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1245-1265. DOI: 10.1007/S11661-011-0603-5 |
0.516 |
|
2011 |
Adharapurapu RR, Kumar D, Zhu J, Torbet CJ, Was GS, Pollock TM. Chromia-assisted decarburization of W-Rich Ni-Based alloys in impure helium at 1273 K (1000 °c) Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1229-1244. DOI: 10.1007/S11661-010-0503-0 |
0.58 |
|
2010 |
Adharapurapu RR, Jiang F, Bingert JF, Vecchio KS. Influence of cold work and texture on the high-strain-rate response of Nitinol Materials Science and Engineering A. 527: 5255-5267. DOI: 10.1016/J.Msea.2010.04.076 |
0.582 |
|
2010 |
Adharapurapu RR, Jiang F, Vecchio KS. Aging effects on hardness and dynamic compressive behavior of Ti-55Ni (at.%) alloy Materials Science and Engineering A. 527: 1665-1676. DOI: 10.1016/J.Msea.2009.10.069 |
0.608 |
|
2009 |
TerBush JR, Adharapurapu RR, Jones JW, Pollock TM. Microsegregation and creep in Mg-Al-Ca-based alloys Magnesium Technology. 161-165. |
0.434 |
|
2007 |
Adharapurapu RR, Vecchio KS. Superelasticity in a new bioImplant material: Ni-rich 55NiTi alloy Experimental Mechanics. 47: 365-371. DOI: 10.1007/S11340-006-9004-X |
0.532 |
|
2006 |
Adharapurapu RR, Jiang F, Vecchio KS. Dynamic fracture of bovine bone Materials Science and Engineering C. 26: 1325-1332. DOI: 10.1016/J.Msec.2005.08.008 |
0.52 |
|
2006 |
Richeton J, Ahzi S, Vecchio KS, Jiang FC, Adharapurapu RR. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress International Journal of Solids and Structures. 43: 2318-2335. DOI: 10.1016/J.Ijsolstr.2005.06.040 |
0.546 |
|
2006 |
Adharapurapu RR, Jiang F, Vecchio KS, Gray GT. Response of NiTi shape memory alloy at high strain rate: A systematic investigation of temperature effects on tension-compression asymmetry Acta Materialia. 54: 4609-4620. DOI: 10.1016/J.Actamat.2006.05.047 |
0.59 |
|
2005 |
Adharapurapu RR, Vecchio KS, Jiang F, Rohatgi A. Effects of ductile laminate thickness, volume fraction, and orientation on fatigue-crack propagation in Ti-Al3Ti metal-intermetallic laminate composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 1595-1608. DOI: 10.1007/S11661-005-0251-8 |
0.587 |
|
2005 |
Adharapurapu RR, Vecchio KS, Rohatgi A, Jiang F. Fracture of Ti-Al3Ti metal-intermetallic laminate composites: Effects of lamination on resistance-curve behavior Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 3217-3236. DOI: 10.1007/S11661-005-0092-5 |
0.579 |
|
2004 |
Jiang F, Rohatgi A, Vecchio KS, Adharapurapu RR. Crack length calculation for bend specimens under static and dynamic loading Engineering Fracture Mechanics. 71: 1971-1985. DOI: 10.1016/J.Engfracmech.2003.10.004 |
0.556 |
|
2004 |
Vecchio KS, Jiang F, Adharapurapu RR. A novel three-point bend test for dynamic fracture toughness measurement Materials Science and Technology. 1: 141-151. |
0.513 |
|
Show low-probability matches. |