| Year |
Citation |
Score |
| 2020 |
Osara JA, Bryant MD. A temperature-only system degradation analysis based on thermal entropy and the degradation-entropy generation methodology International Journal of Heat and Mass Transfer. 158: 120051. DOI: 10.1016/J.Ijheatmasstransfer.2020.120051 |
0.312 |
|
| 2019 |
Osara JA, Bryant MD. Thermodynamics of Fatigue: Degradation-Entropy Generation Methodology for System and Process Characterization and Failure Analysis. Entropy (Basel, Switzerland). 21. PMID 33267399 DOI: 10.3390/E21070685 |
0.331 |
|
| 2019 |
Osara JA, Bryant MD. Thermodynamics of grease degradation Tribology International. 137: 433-445. DOI: 10.1016/J.Triboint.2019.05.020 |
0.325 |
|
| 2016 |
Bryant MD. On Constitutive Relations for Friction from Thermodynamics and Dynamics Journal of Tribology. 138. DOI: 10.1115/1.4032821 |
0.326 |
|
| 2011 |
Nakhaeinejad M, Bryant MD. Dynamic modeling of rolling element bearings with surface contact defects using bond graphs Journal of Tribology. 133. DOI: 10.1115/1.4003088 |
0.342 |
|
| 2011 |
Bryant MD. A bond graph model of an electromagnetic launcher-Part 2: Simulation results Ieee Transactions On Plasma Science. 39: 40-47. DOI: 10.1109/Tps.2010.2072518 |
0.363 |
|
| 2011 |
Bryant MD. A bond graph model of an electromagnetic launcher-Part 1: Structure and details Ieee Transactions On Plasma Science. 39: 29-39. DOI: 10.1109/Tps.2010.2072517 |
0.306 |
|
| 2008 |
Bryant MD, Khonsari MM, Ling FF. On the thermodynamics of degradation Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 464: 2001-2014. DOI: 10.1098/Rspa.2007.0371 |
0.316 |
|
| 2007 |
Slavič J, Bryant MD, Boltežar M. A new approach to roughness-induced vibrations on a slider Journal of Sound and Vibration. 306: 732-750. DOI: 10.1016/J.Jsv.2007.06.036 |
0.332 |
|
| 2002 |
Wang QJ, Bryant MD, Keer LM, Salant RF. Virtual Tribology: Integrating Model-Based Simulations with Modern Computation/Information Technologies Cmes-Computer Modeling in Engineering & Sciences. 3: 417-430. DOI: 10.3970/Cmes.2002.003.417 |
0.423 |
|
| 2000 |
Bryant MD, York D. Measurements and correlations of slider vibrations and wear Journal of Tribology. 122: 374-380. DOI: 10.1115/1.555363 |
0.313 |
|
| 2000 |
Pholsiri C, Bryant MD. Vibrations of a four-degree-of-freedom rigid body sliding against a wavy surface Journal of Sound and Vibration. 235: 763-786. DOI: 10.1006/Jsvi.2000.2977 |
0.354 |
|
| 1998 |
Bryant MD, Tewari A, York D. Effects of micro (rocking) vibrations and surface waviness on wear and wear debris Wear. 216: 60-69. DOI: 10.1016/S0043-1648(97)00287-1 |
0.313 |
|
| 1996 |
Lin JW, Bryant MD. Reductions in wear rate of carbon samples sliding against wavy copper surfaces Journal of Tribology. 118: 116-124. DOI: 10.1115/1.2837065 |
0.335 |
|
| 1995 |
Bryant MD, Lin JW. Wear reductions and contact interface observations for carbon samples sliding against wavy and smooth copper surfaces Astm Special Technical Publications. 32-45. DOI: 10.1520/Stp14048S |
0.347 |
|
| 1995 |
Bryant MD, Tewari A, Lin JW. Wear Rate Reductions in Carbon Brushes, Conducting Current, and Sliding Against Wavy Copper Surfaces Ieee Transactions On Components Packaging and Manufacturing Technology Part A. 18: 375-381. DOI: 10.1109/95.390319 |
0.308 |
|
| 1995 |
Bryant MD, Wang JP, Lin JW. Thermal mounding in high speed dry sliders: experiment, theory and comparison Wear. 181: 668-677. DOI: 10.1016/0043-1648(95)90183-3 |
0.331 |
|
| 1994 |
Lu C, Bryant MD. Simulation of a carbon graphite brush with distributed metal particles Ieee Transactions On Components, Packaging, and Manufacturing Technology: Part A. 17: 68-77. DOI: 10.1109/95.296371 |
0.309 |
|
| 1994 |
Yune YG, Bryant MD. Thermoelastic evolution of hot spots in thermally nonlinear carbon graphite sliders Journal of Thermal Stresses. 17: 45-61. DOI: 10.1080/01495739408946245 |
0.364 |
|
| 1994 |
Chin-Tu L, Bryant MD. Evaluation of subsurface stresses in a thermal mound with application to wear Wear. 177: 15-24. DOI: 10.1016/0043-1648(94)90113-9 |
0.345 |
|
| 1994 |
Chin-Tu L, Bryant MD. Thermoelastic evolution of contact area and mound temperatures in carbon graphite electrical brushes Wear. 174: 137-146. DOI: 10.1016/0043-1648(94)90095-7 |
0.351 |
|
| 1993 |
Bryant MD, Jau-Wen L. Photoelastic visualization of contact phenomena between real tribological surfaces, with and without sliding Wear. 170: 267-279. DOI: 10.1016/0043-1648(93)90247-J |
0.35 |
|
| 1988 |
Oh S, Bryant MD, Yune YG. Steady-State Contact Pressures in Electrical Contacts Ieee Transactions On Components, Hybrids, and Manufacturing Technology. 11: 106-111. DOI: 10.1109/33.2972 |
0.327 |
|
| 1985 |
Bryant MD, Oh S. The transient temperature field existing about a cooled stationary electrical contact Applied Scientific Research. 42: 89-106. DOI: 10.1007/Bf00382531 |
0.324 |
|
| 1984 |
Bryant MD, Miller GR, Keer LM. Line contact between a rigid indenter and a damaged elastic body Quarterly Journal of Mechanics and Applied Mathematics. 37: 467-478. DOI: 10.1093/Qjmam/37.3.467 |
0.497 |
|
| 1983 |
Keer LM, Bryant MD. A Pitting Model for Rolling Contact Fatigue Journal of Lubrication Technology. 105: 198-205. DOI: 10.1115/1.3254565 |
0.485 |
|
| 1982 |
Keer LM, Bryant MD, Haritos GK. Subsurface and Surface Cracking Due to Hertzian Contact Journal of Lubrication Technology. 104: 347-351. DOI: 10.1115/1.3253217 |
0.443 |
|
| 1982 |
Bryant MD, Keer LM. Rough Contact Between Elastically and Geometrically Identical Curved Bodies Journal of Applied Mechanics. 49: 345-352. DOI: 10.1115/1.3162092 |
0.474 |
|
| 1982 |
Bryant MD, Burton RA. Thermal deformation in brushes for current passage through a steadily moving patch Wear. 79: 83-92. DOI: 10.1016/0043-1648(82)90205-8 |
0.363 |
|
| 1981 |
Burton RA, Bryant M. Transient Thermal Deformation In Electrical Brushes Journal of Thermal Stresses. 4: 223-235. DOI: 10.1080/01495738108909964 |
0.335 |
|
| Show low-probability matches. |
