| Year |
Citation |
Score |
| 2018 |
Manero A, Knipe K, Wischek J, Meid C, Okasinski J, Almer J, Karlsson A, Bartsch M, Raghavan S. Capturing the Competing Influence of Thermal and Mechanical Loads on the Strain of Turbine Blade Coatings via High Energy X-rays Coatings. 8: 320. DOI: 10.3390/Coatings8090320 |
0.317 |
|
| 2017 |
Manero A, Selimov A, Fouliard Q, Knipe K, Wischek J, Meid C, Karlsson AM, Bartsch M, Raghavan S. Piezospectroscopic evaluation and damage identification for thermal barrier coatings subjected to simulated engine environments Surface & Coatings Technology. 323: 30-38. DOI: 10.1016/J.Surfcoat.2016.09.057 |
0.34 |
|
| 2017 |
Ding G, Karlsson AM, Santare MH. Numerical evaluation of fatigue crack growth in polymers based on plastically dissipated energy International Journal of Fatigue. 94: 89-96. DOI: 10.1016/J.Ijfatigue.2016.09.012 |
0.401 |
|
| 2016 |
Ding G, Santare MH, Karlsson AM, Kusoglu A. Numerical evaluation of crack growth in polymer electrolyte fuel cell membranes based on plastically dissipated energy Journal of Power Sources. 316: 114-123. DOI: 10.1016/J.Jpowsour.2016.03.031 |
0.704 |
|
| 2015 |
Knipe K, Manero AC, Sofronsky S, Okasinski J, Almer J, Wischek J, Meid C, Karlsson A, Bartsch M, Raghavan S. Synchrotron X-Ray Diffraction Measurements Mapping Internal Strains of Thermal Barrier Coatings During Thermal Gradient Mechanical Fatigue Loading Journal of Engineering For Gas Turbines and Power. 137. DOI: 10.1115/1.4029480 |
0.332 |
|
| 2015 |
Manero A, Sofronsky S, Knipe K, Meid C, Wischek J, Okasinski J, Almer J, Karlsson AM, Raghavan S, Bartsch M. Monitoring Local Strain in a Thermal Barrier Coating System Under Thermal Mechanical Gas Turbine Operating Conditions Jom. DOI: 10.1007/S11837-015-1399-3 |
0.334 |
|
| 2015 |
Khattra NS, Santare MH, Karlsson AM, Schmiedel T, Busby FC. Effect of water transport on swelling and stresses in PFSA membranes Fuel Cells. 15: 178-188. DOI: 10.1002/Fuce.201400058 |
0.77 |
|
| 2014 |
Phadikar JK, Bogetti TA, Karlsson AM. Aspects of Experimental Errors and Data Reduction Schemes From Spherical Indentation of Isotropic Materials. Journal of Engineering Materials and Technology. 136: 0310051-310058. PMID 25053859 DOI: 10.1115/1.4027549 |
0.753 |
|
| 2014 |
Saenz EE, Carlsson LA, Salivar GC, Karlsson AM. Fatigue crack propagation in polyvinylchloride and polyethersulfone polymer foams Journal of Sandwich Structures and Materials. 16: 42-65. DOI: 10.1177/1099636213505304 |
0.366 |
|
| 2014 |
Lu Z, Santare MH, Karlsson AM, Busby FC, Walsh P. Time-dependent mechanical behavior of proton exchange membrane fuel cell electrodes Journal of Power Sources. 245: 543-552. DOI: 10.1016/J.Jpowsour.2013.07.013 |
0.652 |
|
| 2014 |
Nittur PG, Karlsson AM, Carlsson LA. Numerical evaluation of Paris-regime crack growth rate based on plastically dissipated energy Engineering Fracture Mechanics. 124: 155-166. DOI: 10.1016/J.Engfracmech.2014.04.013 |
0.734 |
|
| 2013 |
Phadikar JK, Bogetti TA, Kaliakin VN, Karlsson AM. Conical Indentation of a Viscoelastic Sphere Journal of Engineering Materials and Technology, Transactions of the Asme. 135. DOI: 10.1115/1.4024395 |
0.757 |
|
| 2013 |
Khattra NS, Lu Z, Karlsson AM, Santare MH, Busby FC, Schmiedel T. Time-dependent mechanical response of a composite PFSA membrane Journal of Power Sources. 228: 256-269. DOI: 10.1016/J.Jpowsour.2012.11.116 |
0.771 |
|
| 2013 |
Phadikar JK, Bogetti TA, Karlsson AM. On the uniqueness and sensitivity of indentation testing of isotropic materials International Journal of Solids and Structures. 50: 3242-3253. DOI: 10.1016/J.Ijsolstr.2013.05.028 |
0.761 |
|
| 2013 |
Nittur PG, Karlsson AM, Carlsson LA. Implementation of a plastically dissipated energy criterion for three dimensional modeling of fatigue crack growth International Journal of Fatigue. 54: 47-55. DOI: 10.1016/J.Ijfatigue.2013.04.011 |
0.737 |
|
| 2013 |
Saenz EE, Carlsson LA, Karlsson AM. In situ analysis of fatigue crack propagation in polymer foams Engineering Fracture Mechanics. 101: 23-32. DOI: 10.1016/J.Engfracmech.2012.10.009 |
0.383 |
|
| 2012 |
Saenz EE, Hernández-Pérez A, Carlsson LA, Karlsson AM. A double cantilever beam specimen for foam core fracture characterization Journal of Sandwich Structures and Materials. 14: 281-295. DOI: 10.1177/1099636212444747 |
0.396 |
|
| 2012 |
Lu Z, Lugo M, Santare MH, Karlsson AM, Busby FC, Walsh P. An experimental investigation of strain rate, temperature and humidity effects on the mechanical behavior of a perfluorosulfonic acid membrane Journal of Power Sources. 214: 130-136. DOI: 10.1016/J.Jpowsour.2012.04.094 |
0.645 |
|
| 2012 |
Khattra NS, Karlsson AM, Santare MH, Walsh P, Busby FC. Effect of time-dependent material properties on the mechanical behavior of PFSA membranes subjected to humidity cycling Journal of Power Sources. 214: 365-376. DOI: 10.1016/J.Jpowsour.2012.04.065 |
0.78 |
|
| 2012 |
Phadikar JK, Bogetti TA, Karlsson AM. On establishing elastic-plastic properties of a sphere by indentation testing International Journal of Solids and Structures. 49: 1961-1972. DOI: 10.1016/J.Ijsolstr.2012.04.001 |
0.785 |
|
| 2011 |
Lu Z, Kim C, Karlsson AM, Cross JC, Santare MH. Effect of gas diffusion layer modulus and land-groove geometry on membrane stresses in proton exchange membrane fuel cells Journal of Power Sources. 196: 4646-4654. DOI: 10.1016/J.Jpowsour.2011.01.028 |
0.659 |
|
| 2011 |
Moslemian R, Karlsson AM, Berggreen C. Accelerated fatigue crack growth simulation in a bimaterial interface International Journal of Fatigue. 33: 1526-1532. DOI: 10.1016/J.Ijfatigue.2011.06.006 |
0.4 |
|
| 2011 |
Cheng L, Thomas A, Glancey JL, Karlsson AM. Mechanical behavior of bio-inspired laminated composites Composites Part a: Applied Science and Manufacturing. 42: 211-220. DOI: 10.1016/J.Compositesa.2010.11.009 |
0.438 |
|
| 2011 |
Hernandez MT, Cojocaru D, Bartsch M, Karlsson AM. On the opening of a class of fatigue cracks due to thermo-mechanical fatigue testing of thermal barrier coatings Computational Materials Science. 50: 2561-2572. DOI: 10.1016/J.Commatsci.2011.03.041 |
0.617 |
|
| 2011 |
Saenz EE, Carlsson LA, Karlsson AM. In situ analysis of crack propagation in polymer foams Journal of Materials Science. 46: 5487-5494. DOI: 10.1007/S10853-011-5491-Y |
0.372 |
|
| 2011 |
Saenz EE, Carlsson LA, Karlsson A. Characterization of fracture toughness (G c) of PVC and PES foams Journal of Materials Science. 46: 3207-3215. DOI: 10.1007/S10853-010-5205-X |
0.344 |
|
| 2011 |
Kusoglu A, Santare MH, Karlsson AM. Aspects of fatigue failure mechanisms in polymer fuel cell membranes Journal of Polymer Science, Part B: Polymer Physics. 49: 1506-1517. DOI: 10.1002/Polb.22336 |
0.68 |
|
| 2010 |
Kusoglu A, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Numerical investigation of mechanical durability in polymer electrolyte membrane fuel cells Journal of the Electrochemical Society. 157. DOI: 10.1149/1.3328496 |
0.69 |
|
| 2010 |
Kusoglu A, Karlsson AM, Santare MH. Structure-property relationship in ionomer membranes Polymer. 51: 1457-1464. DOI: 10.1016/J.Polymer.2010.01.046 |
0.663 |
|
| 2010 |
Kusoglu A, Tang Y, Lugo M, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Constitutive response and mechanical properties of PFSA membranes in liquid water Journal of Power Sources. 195: 483-492. DOI: 10.1016/J.Jpowsour.2009.08.010 |
0.674 |
|
| 2009 |
Cheng L, Wang L, Karlsson AM. Mechanics-based analysis of selected features of the exoskeletal microstructure of Popillia japonica Journal of Materials Research. 24: 3253-3267. DOI: 10.1557/Jmr.2009.0409 |
0.416 |
|
| 2009 |
Kusoglu A, Tang Y, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Stress-strain behavior of perfluorosulfonic acid membranes at various temperatures and humidities: Experiments and phenomenological modeling Journal of Fuel Cell Science and Technology. 6: 0110121-0110128. DOI: 10.1115/1.2971069 |
0.67 |
|
| 2009 |
Hernandez MT, Karlsson AM, Bartsch M. On TGO creep and the initiation of a class of fatigue cracks in thermal barrier coatings Surface and Coatings Technology. 203: 3549-3558. DOI: 10.1016/J.Surfcoat.2009.05.018 |
0.636 |
|
| 2009 |
Kusoglu A, Santare MH, Karlsson AM. Mechanics-based model for non-affine swelling in perfluorosulfonic acid (PFSA) membranes Polymer. 50: 2481-2491. DOI: 10.1016/J.Polymer.2009.03.045 |
0.662 |
|
| 2009 |
Cojocaru D, Karlsson AM. Assessing plastically dissipated energy as a condition for fatigue crack growth International Journal of Fatigue. 31: 1154-1162. DOI: 10.1016/J.Ijfatigue.2008.12.009 |
0.41 |
|
| 2009 |
Yan J, Karlsson AM, Bartsch M, Chen X. On stresses induced in a thermal barrier coating due to indentation testing Computational Materials Science. 44: 1178-1191. DOI: 10.1016/J.Commatsci.2008.07.037 |
0.435 |
|
| 2008 |
Cheng L, Wang L, Karlsson AM. Image analyses of two crustacean exoskeletons and implications of the exoskeletal microstructure on the mechanical behavior Journal of Materials Research. 23: 2854-2872. DOI: 10.1557/Jmr.2008.0375 |
0.402 |
|
| 2008 |
Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Investigation of stress and water distribution in membrane electrode assembly (MEA) during fuel cell operation Ecs Transactions. 16: 551-561. DOI: 10.1149/1.2981890 |
0.626 |
|
| 2008 |
Tang Y, Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells Journal of Power Sources. 175: 817-825. DOI: 10.1016/J.Jpowsour.2007.09.093 |
0.697 |
|
| 2008 |
Yan J, Leist T, Bartsch M, Karlsson AM. On cracks and delaminations of thermal barrier coatings due to indentation testing: Experimental investigations Acta Materialia. 56: 4080-4090. DOI: 10.1016/J.Actamat.2008.04.039 |
0.301 |
|
| 2008 |
Kusoglu A, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Micromechanics model based on the nanostructure of PFSA membranes Journal of Polymer Science, Part B: Polymer Physics. 46: 2404-2417. DOI: 10.1002/Polb.21573 |
0.655 |
|
| 2007 |
Bartsch M, Baufeld B, Dalkilic S, Mircea I, Lambrinou K, Leist T, Yan J, Karlsson AM. Time-economic lifetime assessment for high performance thermal barrier coating systems Key Engineering Materials. 333: 147-154. DOI: 10.4028/Www.Scientific.Net/Kem.333.147 |
0.346 |
|
| 2007 |
Yan J, Chen X, Karlsson AM. Determining equi-biaxial residual stress and mechanical properties from the force-displacement curves of conical microindentation Journal of Engineering Materials and Technology, Transactions of the Asme. 129: 200-206. DOI: 10.1115/1.2400280 |
0.401 |
|
| 2007 |
Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses Journal of Power Sources. 170: 345-358. DOI: 10.1016/J.Jpowsour.2007.03.063 |
0.709 |
|
| 2007 |
Yan J, Karlsson AM, Chen X. Determining plastic properties of a material with residual stress by using conical indentation International Journal of Solids and Structures. 44: 3720-3737. DOI: 10.1016/J.Ijsolstr.2006.10.017 |
0.373 |
|
| 2007 |
Yan J, Karlsson AM, Chen X. On internal cone cracks induced by conical indentation in brittle materials Engineering Fracture Mechanics. 74: 2535-2546. DOI: 10.1016/J.Engfracmech.2006.12.005 |
0.424 |
|
| 2007 |
Bartsch M, Baufeld B, Heinzelmann M, Karlsson AM, Dalkilic S, Chernova L. Multiaxial thermo-mechanical fatigue on material systems for gas turbines Materialwissenschaft Und Werkstofftechnik. 38: 712-719. DOI: 10.1002/Mawe.200700193 |
0.419 |
|
| 2006 |
Caulfield J, Karlsson AM, Sypeck DJ. Crushing of a textile core sandwich panel Aiaa Journal. 44: 1339-1344. DOI: 10.2514/1.17156 |
0.368 |
|
| 2006 |
Tang Y, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Stresses in proton exchange membranes due to hygro-thermal loading Journal of Fuel Cell Science and Technology. 3: 119-124. DOI: 10.1115/1.2173666 |
0.44 |
|
| 2006 |
Shi J, Karlsson AM, Baufeld B, Bartsch M. Evolution of surface morphology in thermomechanically cycled NiCoCrAlY- bond coats Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. DOI: 10.1016/J.Msea.2006.07.048] |
0.481 |
|
| 2006 |
Shi J, Karlsson AM, Baufeld B, Bartsch M. Evolution of surface morphology of thermo-mechanically cycled NiCoCrAlY bond coats Materials Science and Engineering A. 434: 39-52. DOI: 10.1016/J.Msea.2006.07.048 |
0.489 |
|
| 2006 |
Tang Y, Karlsson AM, Santare MH, Gilbert M, Cleghorn S, Johnson WB. An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane Materials Science and Engineering A. 425: 297-304. DOI: 10.1016/J.Msea.2006.03.055 |
0.413 |
|
| 2006 |
Chen X, Yan J, Karlsson AM. On the determination of residual stress and mechanical properties by indentation Materials Science and Engineering A. 416: 139-149. DOI: 10.1016/J.Msea.2005.10.034 |
0.394 |
|
| 2006 |
Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle Journal of Power Sources. 161: 987-996. DOI: 10.1016/J.Jpowsour.2006.05.020 |
0.72 |
|
| 2006 |
Cojocaru D, Karlsson AM. A simple numerical method of cycle jumps for cyclically loaded structures International Journal of Fatigue. 28: 1677-1689. DOI: 10.1016/J.Ijfatigue.2006.01.010 |
0.342 |
|
| 2006 |
Zhao M, Chen X, Yan J, Karlsson AM. Determination of uniaxial residual stress and mechanical properties by instrumented indentation Acta Materialia. 54: 2823-2832. DOI: 10.1016/J.Actamat.2006.02.026 |
0.414 |
|
| 2006 |
Agrawal A, Karlsson AM. Obtaining mode mixity for a bimaterial interface crack using the virtual crack closure technique International Journal of Fracture. 141: 75-98. DOI: 10.1007/S10704-006-0069-4 |
0.348 |
|
| 2005 |
Guo SQ, Mumm DR, Karlsson AM, Kagawa Y. Measurement of interfacial shear mechanical properties in thermal barrier coating systems by a barb pullout method Scripta Materialia. 53: 1043-1048. DOI: 10.1016/J.Scriptamat.2005.07.012 |
0.362 |
|
| 2005 |
Shi J, Darzens S, Karlsson AM. Aspects of the morphological evolution in thermal barrier coatings and the intrinsic thermal mismatch therein Materials Science and Engineering A. 392: 301-312. DOI: 10.1016/J.Msea.2004.09.062 |
0.472 |
|
| 2005 |
Tang Y, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Stresses in proton exchange membranes due to hydrahon-dehydration cycles Proceedings of the 3rd International Conference On Fuel Cell Science, Engineering, and Technology, 2005. 207-213. |
0.325 |
|
| 2003 |
Karlsson AM, Hutchinson JW, Evans AG. The displacement of the thermally grown oxide in thermal barrier systems upon temperature cycling Materials Science and Engineering A. 351: 244-257. DOI: 10.1016/S0921-5093(02)00843-2 |
0.349 |
|
| 2003 |
Hyun S, Karlsson AM, Torquato S, Evans AG. Simulated properties of Kagomé and tetragonal truss core panels International Journal of Solids and Structures. 40: 6989-6998. DOI: 10.1016/S0020-7683(03)00350-0 |
0.348 |
|
| 2002 |
Karlsson AM, Xu T, Evans AG. The effect of the thermal barrier coating on the displacement instability in thermal barrier systems Acta Materialia. 50: 1211-1218. DOI: 10.1016/S1359-6454(01)00422-0 |
0.346 |
|
| 2002 |
Karlsson AM, Levi CG, Evans AG. A model study of displacement instabilities during cyclic oxidation Acta Materialia. 50: 1263-1273. DOI: 10.1016/S1359-6454(01)00403-7 |
0.35 |
|
| 2002 |
Karlsson AM, Hutchinson JW, Evans AG. A fundamental model of cyclic instabilities in thermal barrier systems Journal of the Mechanics and Physics of Solids. 50: 1565-1589. DOI: 10.1016/S0022-5096(02)00003-0 |
0.368 |
|
| 2001 |
Karlsson AM, Evans AG. A numerical model of ratcheting in thermal barrier systems Materials Research Society Symposium Proceedings. 645: 49-54. DOI: 10.1557/Proc-645-M9.4.1 |
0.34 |
|
| 2001 |
Karlsson AM, Evans AG. A numerical model for the cyclic instability of thermally grown oxides in thermal barrier systems Acta Materialia. 49: 1793-1804. DOI: 10.1016/S1359-6454(01)00073-8 |
0.315 |
|
| 2000 |
Karlsson AM, Bottega WJ. Thermo-mechanical response of patched plates Aiaa Journal. 38: 1055-1062. DOI: 10.2514/2.1067 |
0.696 |
|
| 2000 |
Karlsson AM. The effects of patch properties on the debonding behavior of patched beam-plates Journal of Engineering Materials and Technology, Transactions of the Asme. 122: 389-393. DOI: 10.1115/1.1288926 |
0.363 |
|
| 2000 |
Karlsson AM, Bottega WJ. On thermal buckling of patched beam-plates International Journal of Solids and Structures. 37: 4655-4690. DOI: 10.1016/S0020-7683(99)00134-1 |
0.708 |
|
| 2000 |
Karlsson AM, Bottega WJ. On the behavior of a class of patched plates during cooling International Journal of Non-Linear Mechanics. 35: 543-566. DOI: 10.1016/S0020-7462(99)00040-2 |
0.698 |
|
| 1999 |
Karlsson AM, Bottega WJ. The presence of edge contact and its influence on the debonding of patched panels International Journal of Fracture. 96: 381-404. DOI: 10.1023/A:1018328932561 |
0.694 |
|
| 1999 |
Karlsson AM, Bottega WJ. On the detachment of step-tapered doublers: Part 2 - Evolution of pressure loaded structures International Journal of Solids and Structures. 36: 1625-1651. DOI: 10.1016/S0020-7683(98)00053-5 |
0.686 |
|
| 1999 |
Bottega WJ, Karlsson AM. On the detachment of step-tapered doublers : Part 1 - Foundations International Journal of Solids and Structures. 36: 1597-1623. DOI: 10.1016/S0020-7683(98)00052-3 |
0.692 |
|
| 1999 |
Karlsson AM, Bottega WJ. Aspects of thermally induced buckling of patched structures Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 1: 278-288. |
0.677 |
|
| Show low-probability matches. |
