Golam Newaz - Publications

Affiliations: 
Chemical Engineering Wayne State University, Detroit, MI, United States 
Area:
Chemical Engineering, Neuroscience Biology, Biomedical Engineering, Cell Biology

215 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2016 Newaz G, Mayeed M, Rasul A. Characterization of balsa wood mechanical properties required for continuum damage mechanics analysis Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 230: 206-218. DOI: 10.1177/1464420714564711  1
2015 Mayeed MS, Newaz GM. Optimisation of process parameters and residual stress analysis of transmission laser microjoining of glass and silicon International Journal of Materials and Product Technology. 50: 161-179. DOI: 10.1504/IJMPT.2015.067825  1
2015 Yaghoubi AS, Begeman P, Newaz G, Board D, Chen Y, Faruque O. Force-Time History Assessment of a Generic Steel Vehicle Front Bumper and Crush Can Subjected to a Rigid Center Pole Impact Conference Proceedings of the Society For Experimental Mechanics Series. 65: 257-265. DOI: 10.1007/978-3-319-06995-1_38  1
2015 Yaghoubi AS, Begeman P, Newaz G, Board D, Chen Y, Faruque O. Rigid Angular Impact Responses of a Generic Steel Vehicle Front Bumper and Crush Can: Correlation of Two Velocity-Measurement Techniques Conference Proceedings of the Society For Experimental Mechanics Series. 65: 249-256. DOI: 10.1007/978-3-319-06995-1_37  1
2014 Seyed Yaghoubi A, Begeman P, Newaz G, Board D, Chen Y, Faruque O. Frontal impact responsesof generic steel front bumper crush can assemblies Sae Technical Papers. 1. DOI: 10.4271/2014-01-0550  1
2014 Han X, Ar-Rasheed JM, Zhang D, Lubowicki A, Favro L, Newaz G. Wide-Area Impact Damage Evaluation with Sonic Infrared Imaging NDE in Advanced Composite Structures Quantitative Infrared Thermography. DOI: 10.21611/Qirt.2014.096  0.68
2014 Mayeed MS, Newaz G. Residual stresses in laser micro-joints of dissimilar materials Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 10. DOI: 10.1115/IMECE2014-36121  1
2014 Mayeed MS, Newaz G. Surface accumulating E. Coli in water flow using a bypass minichannel based device Asme 2014 12th International Conference On Nanochannels, Microchannels, and Minichannels, Icnmm 2014, Collocated With the Asme 2014 4th Joint Us-European Fluids Engineering Division Summer Meeting. DOI: 10.1115/ICNMM2014-21965  1
2014 Zhang D, Han X, Newaz G. Sonic IR crack detection of aircraft turbine engine blades with multi-frequency ultrasound excitations Aip Conference Proceedings. 1581: 1644-1651. DOI: 10.1063/1.4865021  1
2013 Ereifej ES, Khan S, Newaz G, Zhang J, Auner GW, VandeVord PJ. Comparative assessment of iridium oxide and platinum alloy wires using an in vitro glial scar assay. Biomedical Microdevices. 15: 917-24. PMID 23764951 DOI: 10.1007/S10544-013-9780-X  1
2013 Ereifej ES, Matthew HW, Newaz G, Mukhopadhyay A, Auner G, Salakhutdinov I, VandeVord PJ. Nanopatterning effects on astrocyte reactivity. Journal of Biomedical Materials Research. Part A. 101: 1743-57. PMID 23184878 DOI: 10.1002/Jbm.A.34480  0.52
2012 Mayeed MS, Newaz GM. A concentrator of E. Coli in water flow Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2: 203-206. DOI: 10.1115/IMECE2012-85457  1
2012 Zhao SX, Han X, Favro LD, Newaz G, Thomas RL. Composite delamination depth profiling in sonic-IR imaging Aip Conference Proceedings. 1430: 533-539. DOI: 10.1063/1.4716273  1
2012 Zhang D, Han X, Newaz G, Favro LD, Thomas RL. Modeling turbine blade crack detection in sonic IR imaging with a method of creating flat crack surface in finite element analysis Aip Conference Proceedings. 1430: 527-532. DOI: 10.1063/1.4716272  1
2012 Islam MT, Newaz G. Metamaterial with mass-stem array in acoustic cavity Applied Physics Letters. 100. DOI: 10.1063/1.3673833  1
2012 Lubna N, Newaz G. Analysis of titanium-coated glass and imidex (PI) laser bonded samples Journal of Materials Engineering and Performance. 21: 266-270. DOI: 10.1007/S11665-011-9900-9  1
2012 Lubna N, Chaudhury Z, Newaz G. Characterization of failed surface of Ti and imidex (PI) film for different inter-layer thicknesses of Ti film Journal of Materials Engineering and Performance. 21: 1962-1969. DOI: 10.1007/S11665-011-0102-2  1
2012 Hailat MM, Mian A, Chaudhury ZA, Newaz G, Patwa R, Herfurth HJ. Laser micro-welding of aluminum and copper with and without tin foil alloy Microsystem Technologies. 18: 103-112. DOI: 10.1007/S00542-011-1378-8  1
2012 Mancini E, Campana F, Sasso M, Newaz G. Effects of cold rolling process variables on final surface quality of stainless steel thin strip International Journal of Advanced Manufacturing Technology. 61: 63-72. DOI: 10.1007/s00170-011-3698-3  1
2012 Al-Sharif A, Hailat M, Newaz G. The effect of low cycle compression fatigue on composite sandwich beams in the presence of delamination Spe Automotive and Composites Divisions - 12th Annual Automotive Composites Conference and Exhibition 2012, Acce 2012: Unleashing the Power of Design. 728-735.  1
2012 Abdalslam S, Hailat M, Haq M, Newaz G. Modeling impact behavior of sandwich composite with balsa core Spe Automotive and Composites Divisions - 12th Annual Automotive Composites Conference and Exhibition 2012, Acce 2012: Unleashing the Power of Design. 768-775.  1
2012 Erives-Ramirez D, Pech-Canul MI, Chaudhury Z, Newaz G. Coating Al/SiC composites with AlF3 International Sampe Technical Conference 1
2012 Herrera Romero OA, Pech Canul MI, Chaudhury ZA, Newaz G. Interfacial reactions in the liquid/solid and liquid/vapor interfaces of Al-Si-Mg alloys and B 12 (BC 2) substrates Tms Annual Meeting. 1: 997-1004.  1
2011 Ereifej ES, Khan S, Newaz G, Zhang J, Auner GW, VandeVord PJ. Characterization of astrocyte reactivity and gene expression on biomaterials for neural electrodes. Journal of Biomedical Materials Research. Part A. 99: 141-50. PMID 21812095 DOI: 10.1002/Jbm.A.33170  1
2011 Mian A, Law J, Newaz G. Analysis of laser fabricated microjoint performance in cerebrospinal fluid using a computational approach. Journal of the Mechanical Behavior of Biomedical Materials. 4: 117-24. PMID 21094485 DOI: 10.1016/J.Jmbbm.2010.09.013  1
2011 Khan SP, Bhasin K, Newaz GM. Optimizing process variables to control fiber diameter of electrospun polycaprolactone nanofiber using factorial design Materials Research Society Symposium Proceedings. 1316: 65-73. DOI: 10.1557/Opl.2011.520  1
2011 Mayeed MS, Lubna NJ, Auner GW, Patwa R, Herfurth H, Newaz GM. Finite element thermal/mechanical analysis for microscale laser joining of ultrathin coatings of titanium on glass/polyimide system Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 225: 245-254. DOI: 10.1177/1464420711419932  1
2011 Han X, Zhao X, Zhang D, He Q, Song Y, Lubowicki A, Newaz G, Favro LD, Thomas RL. Studying impact damage on carbon-fiber reinforced aircraft composite panels with SonicIR Aip Conference Proceedings. 1335: 438-443. DOI: 10.1063/1.3591885  1
2011 Khan SP, Auner GG, Palyvoda O, Newaz GM. Biocompatibility assessment of next generation materials for brain implantable microelectrodes Materials Letters. 65: 876-879. DOI: 10.1016/J.Matlet.2010.11.058  1
2011 Lubna N, Auner G, Patwa R, Herfurth H, Newaz G. Role of cleaning methods on bond quality of Ti coated glass/imidex system Applied Surface Science. 257: 4749-4753. DOI: 10.1016/J.Apsusc.2010.12.153  1
2011 Chaudhury Z, Hailat M, Liu Y, Newaz G. Aluminum-based composites reinforced with SiC particles and NiTi fibers: Infiuence of fiber dimensions and aging time on mechanical properties Journal of Materials Science. 46: 1945-1955. DOI: 10.1007/S10853-010-5030-2  1
2011 Akhlaque-E-Rasul S, Hailat M, Phadatare A, Newaz G. Progressive failure assessment of balsawood sandwich composites 2nd Joint Us-Canada Conference On Composites - American Society For Composites, 26th Annual Technical Conference: Canadian Association For Composite Structures and Materials 1
2010 Khan S, Newaz G. A comprehensive review of surface modification for neural cell adhesion and patterning. Journal of Biomedical Materials Research. Part A. 93: 1209-24. PMID 20229523 DOI: 10.1002/Jbm.A.32698  1
2010 Mian A, Hailat M, Newaz G, Patwa R, Herfurth H. Characterization of laser processed sub-millimeter lap joints between copper and aluminum under tensile load Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 10: 71-74. DOI: 10.1115/IMECE2010-40590  1
2010 Mayeed MS, Auner GW, Patwa R, Lubna NJ, Newaz GM, Herfurth H. Finite element thermal analysis for microscale laser joining of nanoscale coatings of titanium on glass/polyimide system Asme International Mechanical Engineering Congress and Exposition, Proceedings. 12: 19-24. DOI: 10.1115/IMECE2009-10776  1
2010 Akalin O, Ezirmik KV, Urgen M, Newaz GM. Wear characteristics of NiTi/Al6061 short fiber metal matrix composite reinforced with SiC particulates Journal of Tribology. 132. DOI: 10.1115/1.4002332  1
2010 Dhorajiya AP, Mayeed MS, Auner GW, Baird RJ, Newaz GM, Patwa R, Herfurth H. Finite element thermal/mechanical analysis of transmission laser microjoining of titanium and polyimide Journal of Engineering Materials and Technology, Transactions of the Asme. 132: 0110041-01100410. DOI: 10.1115/1.3184031  1
2010 Thomas RL, Han X, Favro LD, Newaz G. Infrared imaging of defects in materials with chaotic Sonic excitation Proceedings - Ieee Ultrasonics Symposium. 591-594. DOI: 10.1109/ULTSYM.2010.5935448  1
2010 Han X, He Q, Li W, Newaz G, Favro LD, Thomas RL. Progress on developing sonic infrared imaging for defect detection in composite structures Aip Conference Proceedings. 1211: 518-524. DOI: 10.1063/1.3362438  1
2010 Sultana T, Newaz G, Georgiev GL, Baird RJ, Auner GW, Patwa R, Herfurth HJ. A study of titanium thin films in transmission laser micro-joining of titanium-coated glass to polyimide Thin Solid Films. 518: 2632-2636. DOI: 10.1016/J.Tsf.2009.08.004  1
2010 Dhorajiya AP, Mayeed MS, Newaz GM. Finite element thermal analysis for microscale laser joining of glass/silicon system Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference 1
2009 Sultana T, Georgiev GL, Baird RJ, Auner GW, Newaz G, Patwa R, Herfurth HJ. Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials. 2: 237-42. PMID 19627828 DOI: 10.1016/J.Jmbbm.2008.07.004  1
2009 Mian A, Sultana T, Georgiev D, Witte R, Herfurth H, Auner G, Newaz G. Postimplantation pressure testing and characterization of laser bonded glass/polyimide microjoints. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 90: 614-20. PMID 19165771 DOI: 10.1002/Jbm.B.31325  1
2009 Mayeed MS, Al-Mekhnaqi AM, Auner GW, Newaz GM. A surface accumulator of Escherichia coli in water flow. Computer Methods in Biomechanics and Biomedical Engineering. 12: 109-12. PMID 18663613 DOI: 10.1080/10255840802213264  1
2009 Patwa R, Herfurth H, Heinemann S, Ehrenmann S, Newaz G, Baird RJ. Fiber laser microjoining for novel dissimilar material combinations Proceedings of Spie - the International Society For Optical Engineering. 7202. DOI: 10.1117/12.814863  1
2009 Dhorajiya AP, Mayeed MS, Auner GW, Baird RJ, Newaz GM, Patwa R, Herfurth H. Detailed analysis of residual stress profile at micro-scale in transmission laser bonded titanium/polyimide system Asme International Mechanical Engineering Congress and Exposition, Proceedings. 13: 137-143. DOI: 10.1115/IMECE2008-68531  1
2009 Mian A, Sultana T, Newaz G. Performance of laser microjoints in rat brain Asme International Mechanical Engineering Congress and Exposition, Proceedings. 6: 191-195. DOI: 10.1115/IMECE2008-66819  1
2009 Al-Mekhnaqi AM, Mayeed MS, Newaz GM. Prediction of protein conformation in water and on surfaces by Monte Carlo simulations using united-atom method Molecular Simulation. 35: 292-300. DOI: 10.1080/08927020802468364  1
2009 Han X, Ajanahalli AS, Newaz GM, Favro LD, Thomas RL. Modeling to predict Sonic IR detectability of defects in metals Aip Conference Proceedings. 1096: 467-472. DOI: 10.1063/1.3114286  1
2009 Alhomoudi IA, Newaz G. Residual stresses and Raman shift relation in anatase TiO2 thin film Thin Solid Films. 517: 4372-4378. DOI: 10.1016/j.tsf.2009.02.141  1
2009 Georgiev GL, Baird RJ, McCullen EF, Newaz G, Auner G, Patwa R, Herfurth H. Chemical bond formation during laser bonding of Teflon® FEP and titanium Applied Surface Science. 255: 7078-7083. DOI: 10.1016/J.Apsusc.2009.03.046  1
2009 Georgiev GL, Sultana T, Baird RJ, Auner G, Newaz G, Patwa R, Herfurth H. Laser bonding and characterization of Kapton® FN/Ti and Teflon® FEP/Ti systems Journal of Materials Science. 44: 882-888. DOI: 10.1007/S10853-008-3187-8  1
2009 Chaudhury Z, Hailat M, Newaz G. Effects of fiber size and aging on the mechanical properties of NiTi short fiber and SiC particle reinforced Al6061 composite Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 4: 2681-2688.  1
2008 Mayeed MS, Kawaguchi M, Newaz GM, Kato T. Instability and surface diffusion of ultrathin liquid perfluoropolyether films on amorphous carbon surfaces Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 222: 7-13. DOI: 10.1243/13506501JET311  1
2008 Salakhutdinov I, VandeVord P, Palyvoda O, Matthew H, Handa H, Mao G, Auner GW, Newaz G. Fibronectin adsorption to nanopatterned silicon surfaces Biomedical Optics, Biomed 2008. BSuE11. DOI: 10.1155/2008/543170  1
2008 Han X, Ajanahalli AS, Ahmed Z, Li W, Newaz GM, Favro LD, Thomas RL. Finite-element modeling of sonic ir imaging of cracks in aluminum and titanium alloys Aip Conference Proceedings. 975: 483-490. DOI: 10.1063/1.2902700  1
2008 Rahman MH, Thakur JS, Rimai L, Perooly S, Naik R, Zhang L, Auner GW, Newaz G. Dual-mode operation of a Pd/AlN/SiC device for hydrogen sensing Sensors and Actuators, B: Chemical. 129: 35-39. DOI: 10.1016/J.Snb.2007.07.064  1
2008 Mao G, Newaz G, Wei C. ENATBIO: a National Conference on Emerging Nanoscience in Technology and Biomedicine Nanomedicine: Nanotechnology, Biology, and Medicine. 4: 267-272. DOI: 10.1016/J.Nano.2008.09.002  1
2008 Sasso M, Newaz G, Amodio D. Material characterization at high strain rate by Hopkinson bar tests and finite element optimization Materials Science and Engineering A. 487: 289-300. DOI: 10.1016/j.msea.2007.10.042  1
2008 Mayeed MS, Al-Mekhnaqi AM, Kato T, Newaz GM. Critical separation distance needed to form weak menisci between the head and the disk - A molecular simulation study Journal of Molecular Liquids. 138: 120-123. DOI: 10.1016/J.Molliq.2007.08.027  1
2008 Sultana T, Georgiev GL, Auner G, Newaz G, Herfurth HJ, Patwa R. XPS analysis of laser transmission micro-joint between poly (vinylidene fluoride) and titanium Applied Surface Science. 255: 2569-2573. DOI: 10.1016/J.Apsusc.2008.07.149  1
2008 Georgiev GL, Sultana T, Baird RJ, Auner G, Newaz G, Patwa R, Herfurth H. XPS study of laser fabricated titanium/KaptonFN interfaces Applied Surface Science. 254: 7173-7177. DOI: 10.1016/J.Apsusc.2008.05.294  1
2008 Liu Y, Al-Matar B, Newaz G. An investigation on the interface in a NiTi short-fiber-reinforced 6061 aluminum composite by transmission electron microscope Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2749-2759. DOI: 10.1007/S11661-008-9627-X  1
2008 Herfurth HJ, Patwa R, Pantsar H, Heinemann S, Newaz G. Laser processing for alternatives energy devices: Advanced battery and fuel cell applications Icaleo 2008 - 27th International Congress On Applications of Lasers and Electro-Optics, Congress Proceedings. 340-344.  1
2008 Salakhutdinov IF, VandeVord P, Palyvoda O, Matthew HTW, Newaz G, Auner GW. Polymer gratings for protein and glial cells adsorption Optics Infobase Conference Papers 1
2008 Pantsar H, Herfurth H, Heinemann S, Laakso P, Penttila R, Liu Y, Newaz G. Laser microvia drilling and ablation of silicon using 355 nm pico and nanosecond pulses Icaleo 2008 - 27th International Congress On Applications of Lasers and Electro-Optics, Congress Proceedings. 278-287.  1
2008 Salakhutdinov I, VandeVord P, Palyvoda O, Matthew H, Handa H, Mao G, Auner GW, Newaz G. Fibronectin adsorption to nanopatterned silicon surfaces Biomedical Optics, Biomed 2008. BSuE11.  1
2007 Thanawala S, Palyvoda O, Georgiev DG, Khan SP, Al-Homoudi IA, Newaz G, Auner G. A neural cell culture study on thin film electrode materials. Journal of Materials Science. Materials in Medicine. 18: 1745-52. PMID 17483885 DOI: 10.1007/S10856-007-3054-1  1
2007 Mian A, Newaz G, Georgiev DG, Rahman N, Vendra L, Auner G, Witte R, Herfurth H. Performance of laser bonded glass/polyimide microjoints in cerebrospinal fluid Journal of Materials Science: Materials in Medicine. 18: 417-427. PMID 17334691 DOI: 10.1007/S10856-007-2000-6  1
2007 Xie C, Hailat M, Almatar B, Newaz G, Raju BB. Fatigue resistance of short fiber-reinforced TiNi/Al6061-SiC composite Sae Technical Papers. DOI: 10.4271/2007-01-1423  1
2007 Mayeed MS, Newaz GM. Effects of surface roughness on flows through nano/micro channel based biomedical Devices - A study by Lattice Boltzmann method Proceedings of the 2nd Frontiers in Biomedical Devices Conference 2007. 153-154. DOI: 10.1115/BioMed2007-38100  1
2007 Mayeed MS, Al-Mekhnaqi AM, Auner GW, Newaz GM. A micro/mini channel based concentrator of E. coli in water flow Proceedings of the 2nd Frontiers in Biomedical Devices Conference 2007. 149-150. DOI: 10.1115/Biomed2007-38094  1
2007 Xie CL, Hailat M, Wu X, Newaz G, Taya M, Raju B. Development of short fiber-reinforced NiTi/Al6061 composite Journal of Engineering Materials and Technology, Transactions of the Asme. 129: 69-76. DOI: 10.1115/1.2400271  1
2007 Lu J, Han X, Newaz G, Favro LD, Thomas RL. Study of the effect of crack closure in Sonic Infrared Imaging Nondestructive Testing and Evaluation. 22: 127-135. DOI: 10.1080/10589750701448175  1
2007 Rahman MH, Thakur JS, Rimai L, Auner GW, Naik R, Chaudhury ZA, Newaz G. Electrical response of Pd/AlN/6H - SiC and Pd/AlN/3C - SiC devices to hydrogen gas: The effects of AlN layer Journal of Applied Physics. 101. DOI: 10.1063/1.2719006  1
2007 Han X, Islam MS, Newaz GM, Favro LD, Thomas RL. Further development of the simulation of sonic IR imaging of cracks in metals with finite-element models Aip Conference Proceedings. 894: 471-477. DOI: 10.1063/1.2718009  1
2007 Mahmood T, Mian A, Amin MR, Auner G, Witte R, Herfurth H, Newaz G. Finite element modeling of transmission laser microjoining process Journal of Materials Processing Technology. 186: 37-44. DOI: 10.1016/J.Jmatprotec.2006.11.225  1
2007 Al-Homoudi IA, Thakur JS, Naik R, Auner GW, Newaz G. Anatase TiO2 films based CO gas sensor: Film thickness, substrate and temperature effects Applied Surface Science. 253: 8607-8614. DOI: 10.1016/J.Apsusc.2007.04.068  1
2007 Mian A, Newaz G, Mahmood T, Auner G. Mechanical characterization of glass/polyimide microjoints fabricated using cw fiber and diode lasers Journal of Materials Science. 42: 8150-8157. DOI: 10.1007/S10853-007-1703-X  1
2007 Mian A, Sultana T, Auner G, Newaz G. Bonding mechanisms of laser-fabricated titanium/polyimide and titanium coated glass/polyimide microjoints Surface and Interface Analysis. 39: 506-511. DOI: 10.1002/Sia.2547  1
2006 Newaz G, Mian A, Sultana T, Mahmood T, Georgiev DG, Auner G, Witte R, Herfurth H. A comparison between glass/polyimide and titanium/polyimide microjoint performances in cerebrospinal fluid. Journal of Biomedical Materials Research. Part A. 79: 159-65. PMID 16779855 DOI: 10.1002/Jbm.A.30709  1
2006 Mayeed MS, Mian A, Auner GW, Newaz GM. Accumulation of E. coli bacteria in mini-channel flow Journal of Biomechanical Engineering. 128: 458-461. PMID 16706596 DOI: 10.1115/1.2187049  1
2006 Mian A, Mahmood T, Auner G, Witte R, Herfurth H, Newaz G. Effects of laser parameters on the mechanical response of laser irradiated micro-joints Materials Research Society Symposium Proceedings. 926: 90-95. DOI: 10.1557/Proc-0926-Cc08-04  1
2006 Al-Homoudi IA, Rimai L, Naik R, Baird RJ, Auner GW, Newaz G. Anatase TiO 2 thin films based CO gas sensor Materials Research Society Symposium Proceedings. 888: 283-288. DOI: 10.1557/Proc-0888-V03-08  1
2006 Han X, Islam MS, Newaz G, Favro LD, Thomas RL. Finite element modeling of the heating of cracks during sonic infrared imaging Journal of Applied Physics. 99. DOI: 10.1063/1.2189023  1
2006 Han X, Islam MS, Favro LD, Newaz GM, Thomas RL. Simulation of sonic IR imaging of cracks in metals with finite element models Aip Conference Proceedings. 820: 544-549. DOI: 10.1063/1.2184575  1
2006 DiMambro J, Ashbaugh DM, Han X, Favro LD, Lu J, Zeng Z, Li W, Newaz GM, Thomas RL. The potential of sonic IR to inspect aircraft components traditionally inspected with fluorescent penetrant and or magnetic particle inspection Aip Conference Proceedings. 820: 536-543. DOI: 10.1063/1.2184574  1
2006 Zhang L, McCullen EF, Rahman MH, Thakur JS, Rimai L, Baird RJ, Naik R, Newaz G, Auner GW, Ng KYS. Response to hydrogen of a metal/AlN/Si thin film structure: Effects of composition and structure of a combination Pd-Cr gate Sensors and Actuators, B: Chemical. 113: 843-851. DOI: 10.1016/J.Snb.2005.03.115  1
2006 Sasso M, Amodio D, Newaz G. Dynamic material characterization by SHPB tests and FE optimization Proceedings of the 2006 Sem Annual Conference and Exposition On Experimental and Applied Mechanics 2006. 3: 1327-1335.  1
2005 Khan SP, Auner GG, Newaz GM. Influence of nanoscale surface roughness on neural cell attachment on silicon. Nanomedicine : Nanotechnology, Biology, and Medicine. 1: 125-9. PMID 17292068 DOI: 10.1016/J.Nano.2005.03.007  1
2005 Mian A, Newaz G, Vendra L, Rahman N, Georgiev DG, Auner G, Witte R, Herfurth H. Laser bonded microjoints between titanium and polyimide for applications in medical implants Journal of Materials Science: Materials in Medicine. 16: 229-237. PMID 15744614 DOI: 10.1007/S10856-005-6684-1  1
2005 Xie CL, Hailat M, Abedin Z, Wu X, Newaz G, Taya M, Raju B. Shape memory effect of tini short fiber on mechanical properties of TiNi/Al6061 composite Sae Technical Papers. DOI: 10.4271/2005-01-1391  1
2005 Thanawala S, Khan SP, Palyvoda O, Georgiev DG, Al-Homoudi IA, Newaz G, Auner G. Surface modification and neural tissue culture of thin film electrode materials Materials Research Society Symposium Proceedings. 872: 359-364. DOI: 10.1557/Proc-872-J18.8  1
2005 Rahman MH, Zhang L, Rimai L, Baird RJ, Naik R, Ng KYS, Auner G, Newaz G. Effects of substrate materials on the electrical behavior of Pd/AlN/Semiconductor based Hydrogen sensors Materials Research Society Symposium Proceedings. 872: 383-387. DOI: 10.1557/Proc-872-J18.12  1
2005 Georgiev DG, Baird RJ, Avrutsky I, Auner G, Newaz G, Tokranova N. A systematic study of the formation of nano-tips on silicon thin films by excimer laser irradiation Materials Research Society Symposium Proceedings. 872: 225-230. DOI: 10.1557/Proc-872-J13.6  1
2005 Al-Homoudi IA, Zhang L, McCullen EF, Huang C, Rimai L, Baird RJ, Ng KYS, Naik R, Auner GW, Newaz G. Fabrication of anatase TiO 2 thin film using pulsed DC magnetron sputtering Materials Research Society Symposium Proceedings. 848: 165-170. DOI: 10.1557/Proc-848-Ff3.20  1
2005 Newaz G, Georgiev DG, Mian A, Auner G, Herfurth H, Witte R. Laser fabrication and characterization of adhesive-free joints for encapsulation of biomedical implant devices Materials Research Society Symposium Proceedings. 845: 267-272. DOI: 10.1557/Proc-845-Aa5.15  1
2005 Zhang L, Al-Homoudi IA, Rahman MH, McCullen EF, Rimai L, Baird RJ, Naik R, Newaz G, Auner GW, Ng KYS. Performance of a MIS type Pd-Cr/AlN/Si hydrogen sensor Materials Research Society Symposium Proceedings. 828: 223-227. DOI: 10.1557/Proc-828-A5.4  1
2005 Han X, Lu J, Islam MS, Li W, Zeng Z, Favro LD, Newaz G, Thomas RL. Sonic infrared imaging NDE Proceedings of Spie - the International Society For Optical Engineering. 5765: 142-147. DOI: 10.1117/12.600118  1
2005 Han X, Islam MS, Newaz G, Favro LD, Thomas RL. Finite-element modeling of acoustic chaos to sonic infrared imaging Journal of Applied Physics. 98. DOI: 10.1063/1.1947382  1
2005 Han X, Li W, Zeng Z, Favro LD, Newaz GM, Thomas RL. Study of the effect of geometry in sonic IR imaging Aip Conference Proceedings. 760: 637-641. DOI: 10.1063/1.1916735  1
2005 Han X, Lu J, Islam MS, Li W, Zeng Z, Kashyap N, Yitamben E, Favro LD, Newaz GM, Thomas RL. Developing sonic IR imaging NDE for aircraft structures Aip Conference Proceedings. 760: 632-636. DOI: 10.1063/1.1916734  1
2005 Newaz G, Chen X. Progressive damage assessment in thermal barrier coatings using thermal wave imaging technique Surface and Coatings Technology. 190: 7-14. DOI: 10.1016/J.Surfcoat.2004.07.088  1
2005 Lu J, Newaz GM, Gibson RF. Buckling strength analysis of adhesively bonded aluminum hat sections International Journal of Solids and Structures. 42: 4947-4957. DOI: 10.1016/J.Ijsolstr.2004.10.018  1
2005 Bonora N, Gentile D, Pirondi A, Newaz G. Ductile damage evolution under triaxial state of stress: Theory and experiments International Journal of Plasticity. 21: 981-1007. DOI: 10.1016/j.ijplas.2004.06.003  1
2005 Jyoti A, Gibson RF, Newaz GM. Experimental studies of Mode I energy release rate in adhesively bonded width tapered composite DCB specimens Composites Science and Technology. 65: 9-18. DOI: 10.1016/J.Compscitech.2004.04.006  1
2005 Georgiev DG, Rosenberger LW, Danylyuk YV, Baird RJ, Newaz G, Shreve G, Auner G. Excimer laser modification of thin AlN films Applied Surface Science. 249: 45-53. DOI: 10.1016/J.Apsusc.2004.11.027  1
2005 Georgiev DG, Sultana T, Mian A, Auner G, Herfurth H, Witte R, Newaz G. Laser fabrication and characterization of sub-millimeter joints between polyimide and Ti-coated borosilicate glass Journal of Materials Science. 40: 5641-5647. DOI: 10.1007/S10853-005-1291-6  1
2005 Al-Homoudi IA, Zhang L, Georgiev DG, Naik R, Naik VM, Rimai L, Ng KYS, Baird RJ, Auner GW, Newaz G. Residual stresses in TiO 2 anatase thin films deposited on glass, sapphire and Si substrates Materials Research Society Symposium Proceedings. 875: 363-368.  1
2004 Rahman MH, Ng KYS, McCullen EF, Naik R, Newaz G, Danylyuk Y, Rimai L, Baird RJ, Auner GW. Saturation and Flow Rate Effects on the Response of a Pd/AIN/SiC Hydrogen Sensor Mrs Proceedings. 815. DOI: 10.1557/Proc-815-J5.7  0.6
2004 Bauer I, Russek UA, Herfurth HJ, Witte R, Heinemann S, Newaz G, Mian A, Georgiev D, Auner G. Laser micro-joining of dissimilar and biocompatible materials Proceedings of Spie - the International Society For Optical Engineering. 5339: 454-464. DOI: 10.1117/12.530239  1
2004 Rahman NM, Mian A, Newaz GM. Analysis and characterization of adhesively bonded Mg-steel lap joints American Society of Mechanical Engineers, Design Engineering Division (Publication) De. 117: 129-135. DOI: 10.1115/IMECE2004-60939  1
2004 Georgiev DG, Baird RJ, Avrutsky I, Auner G, Newaz G. Controllable excimer-laser fabrication of conical nano-tips on silicon thin films Applied Physics Letters. 84: 4881-4883. DOI: 10.1063/1.1762978  1
2004 Avrutsky I, Georgiev DG, Frankstein D, Auner G, Newaz G. Super-resolution in laser annealing and ablation Applied Physics Letters. 84: 2391-2393. DOI: 10.1063/1.1688995  1
2004 Han X, Zeng Z, Li W, Islam MS, Lu J, Loggins V, Yitamben E, Favro LD, Newaz G, Thomas RL. Acoustic chaos for enhanced detectability of cracks by sonic infrared imaging Journal of Applied Physics. 95: 3792-3797. DOI: 10.1063/1.1652243  1
2004 Ali MY, Nusier SQ, Newaz GM. Creep effects on early damage initiation in a TBC system Journal of Materials Science. 39: 3383-3390. DOI: 10.1023/B:JMSC.0000026940.56103.d3  1
2004 Lu J, Newaz GM, Gibson RF. The role of adhesive in the mechanical response of adhesively bonded aluminum hat sections under axial compression International Journal of Solids and Structures. 41: 4757-4767. DOI: 10.1016/J.Ijsolstr.2004.02.042  1
2004 Mian A, Newaz G, Han X, Mahmood T, Saha C. Response of sub-surface fatigue damage under sonic load - a computational study Composites Science and Technology. 64: 1115-1122. DOI: 10.1016/J.Compscitech.2003.08.009  1
2004 Mian A, Han X, Islam S, Newaz G. Fatigue damage detection in graphite/epoxy composites using sonic infrared imaging technique Composites Science and Technology. 64: 657-666. DOI: 10.1016/J.Compscitech.2003.07.005  1
2004 Georgiev DG, Baird RJ, Newaz G, Auner G, Witte R, Herfurth H. An XPS study of laser-fabricated polyimide/titanium interfaces Applied Surface Science. 236: 71-76. DOI: 10.1016/J.Apsusc.2004.03.261  1
2004 Gan C, Gibson RF, Newaz GM. Analytical/experimental investigation of energy absorption and grid-stiffened composite structures under transverse loading Experimental Mechanics. 44: 185-194. DOI: 10.1007/Bf02428178  1
2004 Mian A, Newaz G, Vendra L, Wu X, Liu S. Role of defects on mechanical response of Nafion® membranes for fuel cell applications Fuel Cell Science, Engineering and Technology - 2004. 607-611.  1
2004 Herfurth HJ, Witte R, Heinemann S, Newaz G, Mian A, Georgiev D, Auner G. Joining challenges in the packaging of BIOMEMS Icaleo 2004 - 23rd International Congress On Applications of Laser and Electro-Optics, Congress Proceedings 1
2004 Rahman MH, Ng KYS, McCullen EF, Naik R, Newaz G, Danylyuk Y, Rimai L, Baird RJ, Auner GW. Saturation and flow rate effects on the response of a Pd/AlN/SiC hydrogen sensor Materials Research Society Symposium Proceedings. 815: 299-303.  1
2004 Rimai L, Rahman MH, McCullen EF, Zhang L, Thakur JS, Naik R, Newaz GM, Ng KYS, Baird RJ, Auner GW. The electrical behavior of Pd/AlN/semiconductor thin film hydrogen sensing structures Materials Research Society Symposium Proceedings. 815: 305-310.  1
2003 Shams T, McDonald J, Rangarajan N, Haffner M, Newaz G, Nusier S. Design of temperature insensitive ribs for crash test dummies Sae Technical Papers. DOI: 10.4271/2003-01-0502  1
2003 Amodio D, Broggiato GB, Campana F, Newaz GM. Digital speckle correlation for strain measurement by image analysis Experimental Mechanics. 43: 396-402. DOI: 10.1177/0014485103434004  1
2003 Auner G, Shreve G, Ying H, Newaz G, Hughes C, Xu J. Dual mode acoustic wave biosensors microarrays Proceedings of Spie - the International Society For Optical Engineering. 5119: 129-139. DOI: 10.1117/12.499097  1
2002 Feng B, Newaz G, Auner G, Akbar SA, Merhaba A. Nondestructive evaluation of bonding characteristics of TiO2-Al2O3 gas sensor Proceedings of Spie - the International Society For Optical Engineering. 4703: 31-36. DOI: 10.1117/12.469628  1
2002 Abdel-Haq M, Newaz G. Modeling the crushing response of PMC tubes under quasi-static and dynamic loading conditions Transportation: Making Tracks For Tomorrow's Transportation. 91-98. DOI: 10.1115/IMECE2002-32952  1
2002 Costanzi M, Sayal G, Newaz G. Dynamic behavior of monolithic and composite materials by split Hopkinson pressure bar testing Asme International Mechanical Engineering Congress and Exposition, Proceedings. 65-68. DOI: 10.1115/IMECE2002-32944  1
2002 Maaita SY, Newaz GM. Static and dynamic crush behavior of circular aluminum extrusions with rigid PU foam filler Asme International Mechanical Engineering Congress and Exposition, Proceedings. 51-58. DOI: 10.1115/IMECE2002-32925  1
2002 Liu Z, Gibson RF, Newaz GM. Improved analytical models for mixed-mode bending tests of adhesively bonded joints Journal of Adhesion. 78: 245-268. DOI: 10.1080/00218460210410  1
2002 Liu Z, Gibson RF, Newaz GM. The use of a modified mixed mode bending test for characterization of mixed-mode fracture behavior of adhesively bonded metal joints Journal of Adhesion. 78: 223-244. DOI: 10.1080/00218460210408  1
2002 Newaz G, Johnson N, Saha N. Transportation: Making Tracks for Tomorrow's Transportation - Introduction Transportation: Making Tracks For Tomorrow's Transportation. 29.  1
2002 Broggiato GB, Newaz GM, Amodio D. Application of digital speckle correlation for strain measurement in composites Key Engineering Materials. 221: 337-346.  1
2001 Abdel-Haq M, Newaz GM. Role of failure modes on energy absorption in unidirectional PMC tubes Journal of Composite Materials. 35: 941-953. DOI: 10.1177/002199801772662370  1
2001 Akalin O, Newaz GM. Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part II - Correlation with bench test data Journal of Tribology. 123: 219-223. DOI: 10.1115/1.1286338  1
2001 Akalin O, Newaz GM. Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part I - Analytical results Journal of Tribology. 123: 211-218. DOI: 10.1115/1.1286337  1
2001 Abdel-Haq M, Newaz GM. Influence of crush mechanisms on energy absorption of PMC square tubes Journal of Thermoplastic Composite Materials. 14: 160-174. DOI: 10.1106/6W8K-4K7M-4KWW-57KB  1
2001 Ali MY, Chen X, Newaz GM. Oxide layer development under thermal cycling and its role on damage evolution and spallation in TBC system Journal of Materials Science. 36: 4535-4542. DOI: 10.1023/A:1017959509216  1
2001 Chen XQ, Newaz GM. Oxidation and damage of EB-PVD thermal barrier coatings under thermal cycling Journal of Materials Science Letters. 20: 93-95. DOI: 10.1023/A:1006739520634  1
2001 Ali MY, Nusier SQ, Newaz GM. Mechanics of damage initiation and growth in a TBC/superalloy system International Journal of Solids and Structures. 38: 3329-3340. DOI: 10.1016/S0020-7683(00)00261-4  1
2001 Chen X, Newaz G, Han X. Damage assessment in thermal barrier coatings using thermal wave imaging technique American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. 66: 239-246.  1
2001 Newaz G, Saha N, Faruque O. American Society of Mechanical Engineering, Applied Mechanics Division, AMD: Foreword American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 250.  1
2001 Lu J, Newaz GM, Gibson RF. The role of adhesive in the load response of adhesively bonded aluminum hat sections under axial compression American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 250: 19-25.  1
2001 Favro LD, Thomas RL, Han X, Ouyang Z, Newaz G, Gentile D. Sonic infrared imaging of fatigue cracks International Journal of Fatigue. 23.  1
2000 Suresh N, Newaz G, Patterson C. Effect of temperature and loading rate on adhesively bonded fiber reinforced plastic automotive sections Sae Technical Papers. DOI: 10.4271/2000-01-2730  1
2000 Lu JP, Newaz G, Gibson R. Computational simulation of adhesively bonded aluminum hat sections under plastic buckling deformation Sae Technical Papers. DOI: 10.4271/2000-01-2703  1
2000 Nusier SQ, Newaz GM. Growth of interfacial cracks in a TBC/superalloy system due to oxide volume induced internal pressure and thermal loading International Journal of Solids and Structures. 37: 2151-2166. DOI: 10.1016/S0020-7683(98)00321-7  1
2000 Nusier SQ, Newaz GM, Chaudhury ZA. Experimental and analytical evaluation of damage processes in thermal barrier coatings International Journal of Solids and Structures. 37: 2495-2506. DOI: 10.1016/S0020-7683(98)00320-5  1
2000 Rahman M, Newaz G. Boussinesq type solution for a transversely isotropic half-space coated with a thin film International Journal of Engineering Science. 38: 807-822. DOI: 10.1016/S0020-7225(99)00052-X  1
2000 Ahmad J, Newaz GM, Nicholas T. Analysis of characterization methods for inelastic composite material deformation under multiaxial stresses Astm Special Technical Publication. 41-53.  1
1999 Akalin O, Newaz GM, Durga V, Rao N. Frictional characteristics of plasma spray coated cylinder bores Sae Technical Papers. DOI: 10.4271/1999-01-1220  1
1999 Chaudhury ZA, Newaz GM, Nusier SQ, Ahmed T, Thomas RL. Chronological evaluation of interfacial damage in TBC due to thermal cycling Journal of Materials Science. 34: 2475-2481. DOI: 10.1023/A:1004535305143  1
1999 Newaz GM, Bonora N, Krishnappa M. Computational analysis of mixed-mode delamination crack growth in a woven laminated ceramic-matrix composite Composites Science and Technology. 59: 2287-2292. DOI: 10.1016/S0266-3538(99)00086-X  1
1999 Zhang K, Newaz GM. Analysis of Mechanical Yield Behavior andConstitutive Response of MMC Journal of Composites Technology and Research. 21: 206-214.  1
1999 Zhang K, Newaz G, Ahmad J, Chandu S. Analysis of a quasi-isotropic MMC laminate using Iosipescu shear test Journal of Composite Materials. 33: 971-983.  1
1999 Liu Z, Gibson RF, Newaz GM. Improved analytical model for Mode I energy release rate in adhesively bonded DCB specimens International Sampe Technical Conference. 31: 568-580.  1
1999 Abdel-Haq M, Broggiato GB, Newaz GM. Constraint effects on energy absorption in unidirectional PMC tubes Journal of Composite Materials. 33: 774-793.  1
1998 Akalin O, Newaz GM. A new experimental technique for friction simulation in automotive piston ring and cylinder liners Sae Technical Papers. DOI: 10.4271/981407  1
1998 Krishnappa M, Newaz GM. Computational analysis of mixed-mode delamination crack growth in a woven laminated ceramic matrix composite Composites and Functionally Graded Materials. 455-458. DOI: 10.1016/S0266-3538(99)00086-X  1
1998 Nusier S, Newaz G. Analysis of interfacial cracks in a TBC/superalloy system under thermal loading Engineering Fracture Mechanics. 60: 577-581.  1
1998 Nusier SQ, Newaz GM. Analysis of interfacial cracks in a TBC/superalloy system under thermomechanical loading Journal of Engineering For Gas Turbines and Power. 120: 813-819.  1
1998 Nusier SQ, Newaz GM. Transient residual stresses in thermal barrier coatings: Analytical and numerical results Journal of Applied Mechanics, Transactions Asme. 65: 346-353.  1
1998 Newaz GM, Zhang K. Inelastic response of off-axis MMC lamina Journal of Engineering Materials and Technology, Transactions of the Asme. 120: 163-169.  1
1998 Bonora N, Newaz GM. Low cycle fatigue life estimation for ductile metals using a nonlinear continuum damage mechanics model International Journal of Solids and Structures. 35: 1881-1894.  1
1998 Abdel-Haq MM, Newaz GM. An innovative approach to improve energy absorption in polymeric composite tubes American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. 56: 115-118.  1
1998 Ahmad J, Newaz GM, Nicholas T. Prediction of metal matrix composite response to multiaxial stresses American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. 56: 43-51.  1
1998 Newaz GM, Nusier SQ, Chaudhury ZA. Damage accumulation mechanisms in thermal barrier coatings Journal of Engineering Materials and Technology, Transactions of the Asme. 120: 149-153.  1
1998 Nusier SQ, Newaz GM, Chaudhury ZA, Chen X, Khan JM. Effect of different thermal cycles on TBC spallation lifetime American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. 56: 33-36.  1
1998 Chaudhury ZA, Ahmed T, Newaz GM, Wang L, Akbar SA. Evaluation of bond integrity of TiO2-Y2O3 sensor using thermal wave imaging technique Materials Letters. 34: 76-80.  1
1997 Bonora N, Newaz G. Modeling damage evolution in a hybrid ceramic matrix composite under static tensile load Journal of Engineering Materials and Technology, Transactions of the Asme. 119: 401-407. DOI: 10.1115/1.2812276  1
1997 Rahman M, Newaz G. Elastostatic surface displacements of a half-space reinforced by a thin film due to an axial ring load International Journal of Engineering Science. 35: 603-611.  1
1997 Newaz GM, Bonora N. Fatigue life modeling of hybrid ceramic matrix composites Thermal and Mechanical Test Methods and Behavior of Continuous-Fiber Ceramic Composites. 264-274.  1
1997 Nusier SQ, Newaz GM. Analysis of interfacial cracks in a TBC/superalloy system under thermo-mechanical loading American Society of Mechanical Engineers (Paper) 1
1997 Chandu S, Ahmad J, Newaz GM. Detailed interpretation of off-axis and Iosipescu test data on metal matrix composites Journal of Reinforced Plastics and Composites. 16: 1156-1167.  1
1997 Chaudhury ZA, Newaz GM, Ahmed T. Interfacial cracking due to isothermal heating in thermal barrier coatings (TBCs) Journal of Materials Science Letters. 17: 85-87.  1
1997 Nusier SQ, Newaz GM, Chaudhury ZA, Ahmed T. Effect of holding time on damage state in a thermal barrier coating American Society of Mechanical Engineers, Materials Division (Publication) Md. 80: 401-405.  1
1997 Chaudhury ZA, Newaz GM, Nusier SQ, Ahmed T. Interfacial damage in EB-PVD thermal barrier coatings due to thermal cycling Materials Science and Engineering A. 231: 34-41.  1
1996 Newaz GM. Constitutive response and deformation mechanisms in unidirectional metal matrix composites under compression Astm Special Technical Publication. 1274: 278-291.  1
1996 Newaz GM, Majumdar BS. In-phase thermomechanical fatigue of metal matrix composites: Deformation response and progressive damage mechanisms Astm Special Technical Publication. 1274: 264-277.  1
1996 Newaz GM, Majumdar BS, Brust FW. Inelastic deformation mechanisms in SCS-6/Ti 15-3 metal matrix composite (MMC) lamina under compression Astm Special Technical Publication. 1253: 208-230.  1
1995 Majumdar BS, Newaz GM. Constituent damage mechanisms in metal matrix composites under fatigue loading, and their effects on fatigue life Materials Science and Engineering A. 200: 114-129. DOI: 10.1016/0921-5093(95)07010-9  1
1995 Sierakowski RL, Newaz GM. Damage tolerance in advanced composites Damage Tolerance in Advanced Composites 1
1995 Newaz GM, Krishnappa M, Bonora N. Damage initiation and failure modes in a unidirectional MMC with a hole under tension and compression American Society of Mechanical Engineers, Materials Division (Publication) Md. 69: 323-333.  1
1994 Newaz GM, Majumdar BS. A comparison of mechanical response of MMC at room and elevated temperatures Composites Science and Technology. 50: 85-90. DOI: 10.1016/0266-3538(94)90128-7  1
1994 Newaz GM, Majumdar BS. Comparison of mechanical response of MMC at room and elevated temperatures Composites Science and Technology. 50: 13-22. DOI: 10.1016/0266-3538(94)90122-8  1
1994 Bonora N, Costanzi M, Newaz G, Marchetti M. Microdamage effects on the overall response of long fibre/metal-matrix composites Composites. 25: 575-582. DOI: 10.1016/0010-4361(94)90187-2  1
1994 Majumdar BS, Newaz GM. Fatigue of a SCS6/Ti-15-3 metal matrix composite Proceedings of the American Society For Composites. 367-376.  1
1994 Sierakowski RL, Newaz GM. Key elements in damage tolerance concept for polymeric composites Proceedings of the American Society For Composites. 640-649.  1
1994 Brust FW, Newaz GM, Majumdar BS. Study of tension, compression and creep deformation of metal matrix composites Proceedings of the American Society For Composites. 734-741.  1
1993 Majumdar BS, Newaz GM, Ellis JR. Evolution of damage and plasticity in Metallurgical Transactions A. 24: 1597-1610. DOI: 10.1007/BF02646599  1
1993 Newaz GM, Majumdar BS. Failure modes in transverse metal-matrix composite lamina under compression Journal of Materials Science Letters. 12: 551-552. DOI: 10.1007/BF00278320  1
1992 Majumdar BS, Newaz GM. Inelastic deformation of metal matrix composites: Plasticity and damage mechanisms Philosophical Magazine a: Physics of Condensed Matter, Structure, Defects and Mechanical Properties. 66: 187-212. DOI: 10.1080/01418619208201551  1
1992 Newaz GM, Majumdar BS. Crack initiation around holes in a unidirectional MMC under fatigue loading Engineering Fracture Mechanics. 42: 699-711. DOI: 10.1016/0013-7944(92)90052-G  1
1992 Newaz GM, Majumdar BS, Brust FW. Thermal cycling response of quasi-isotropic metal matrix composites Journal of Engineering Materials and Technology, Transactions of the Asme. 114: 156-161.  1
1992 Majumdar BS, Newaz GM, Brust FW. Constitutive behavior of metal matrix composites American Society of Mechanical Engineers, Materials Division (Publication) Md. 40: 77-90.  1
1991 Newaz GM, Majumdar BS. Deformation and failure mechanisms in metal matrix composites American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. 22: 55-65.  1
1990 Lustiger A, Newaz GM. Interlamellar Fracture and Craze Growth in PEEK Composites under Cyclic Loading Journal of Composite Materials. 24: 175-187. DOI: 10.1177/002199839002400203  1
1989 Newaz GM, Walsh WJ. Interrelationship of Damage and Strain in Particulate Composites Journal of Composite Materials. 23: 326-336. DOI: 10.1177/002199838902300402  1
1989 Newaz GM, Mall S. Relaxation-Controlled Cyclic Delamination Growth in Advanced Thermoset and Thermoplastic Composites at Elevated Temperature Journal of Composite Materials. 23: 133-145. DOI: 10.1177/002199838902300202  1
1989 Newaz GM, Ahmad J. A simple technique for measuring mode I delamination energy release rate in polymeric composites Engineering Fracture Mechanics. 33: 541-552. DOI: 10.1016/0013-7944(89)90038-6  1
1988 Newaz GM, Yung JY. Modeling split crack growth behavior in a unidirectional composite under fatigue loading Engineering Fracture Mechanics. 29: 483-495. DOI: 10.1016/0013-7944(88)90035-5  1
1988 Newaz GM. On the validity of orthotropic fracture model for advanced thermoplastic composites Engineering Fracture Mechanics. 29: 31-39. DOI: 10.1016/0013-7944(88)90004-5  1
1988 Rodriguez EL, Newaz GM. EFFECT OF SAND SURFACE TREATMENT ON SAND-FILLED COMPOSITES Polymer Composites. 9: 93-102. DOI: 10.1002/pc.750090112  1
1987 Mall S, Newaz GM, Farhadinia M. Effect of Filler Size and Matrix Properties on Fracture Toughness of Particulate Composites Journal of Reinforced Plastics and Composites. 6: 138-152. DOI: 10.1177/073168448700600203  1
1986 Newaz GM. Fracture in particulate composites Journal of Materials Science Letters. 5: 71-72. DOI: 10.1007/BF01671441  1
1985 Newaz GM. A Quantitative Assessment of Debonding in Unidirectional Composites Under Long-Term Loading Journal of Reinforced Plastics and Composites. 4: 354-364. DOI: 10.1177/073168448500400402  1
1985 Newaz GM. On Interfacial Failure in Notched Unidirectional Glass/Epoxy Composites Journal of Composite Materials. 19: 276-286. DOI: 10.1177/002199838501900306  1
1985 Newaz GM. Influence of matrix material on flexural fatigue performance of unidirectional composites Composites Science and Technology. 24: 199-214. DOI: 10.1016/0266-3538(85)90073-9  1
1985 Newaz GM. An expression for the optimum case thickness of notched cylindrical carburized fatigue members Materials Science and Engineering. 69. DOI: 10.1016/0025-5416(85)90359-3  1
1985 Newaz GM. Fatigue damage growth rate in unidirectional composites in flexural loading Journal of Materials Science Letters. 4: 197-199. DOI: 10.1007/BF00728075  1
1983 Newaz GM. Fatigue life prediction scheme for carburized members subjected to ln-phase multiaxial stresses Sae Technical Papers. DOI: 10.4271/830635  1
1983 Newaz GM. Apparent interlaminar shear strength of epoxy and vinyl ester composites Sae Technical Papers. DOI: 10.4271/830074  1
Show low-probability matches.