Year |
Citation |
Score |
2020 |
Kassner ME. New Developments in Understanding Harper–Dorn, Five-Power Law Creep and Power-Law Breakdown Metals. 10: 1284. DOI: 10.3390/met10101284 |
0.323 |
|
2020 |
Ermagan R, Sauzay M, Kassner ME. Assessment of Internal Stresses Using Dislocation Dipole Heights in Cyclically Deformed [001] Copper Single Crystals Metals. 10: 512. DOI: 10.3390/met10040512 |
0.416 |
|
2020 |
Ermagan R, Sauzay M, Mecklenburg MH, Kassner ME. Determination of Long-Range Internal Stresses in Cyclically Deformed Copper Single Crystals Using Convergent Beam Electron Diffraction Crystals. 10: 1071. DOI: 10.3390/cryst10121071 |
0.392 |
|
2020 |
Singh SP, Kumar P, Kassner ME. Erratum to “The low-stress and high-temperature creep in LiF single crystals: An explanation for the So-called Harper-Dorn creep” [Materialia 13 (2020) 10086] Materialia. 14: 100893. DOI: 10.1016/J.Mtla.2020.100893 |
0.407 |
|
2020 |
Singh SP, Kumar P, Kassner ME. The Low-Stress and High-Temperature Creep in LiF Single Crystals: An Explanation for the So-called Harper-Dorn Creep Materialia. 13: 100864. DOI: 10.1016/J.Mtla.2020.100864 |
0.464 |
|
2020 |
Kim K, Kang T, Kassner ME, Son K, Lee K. High-temperature tensile and high cycle fatigue properties of inconel 625 alloy manufactured by laser powder bed fusion Additive Manufacturing. 35: 101377. DOI: 10.1016/J.Addma.2020.101377 |
0.445 |
|
2019 |
Singh SP, Huang X, Kumar P, Kassner ME. Short communication: Assessment of the dislocation density using X-ray topography in Al single crystals annealed for long times near the melting temperature Materials Today Communications. 21: 100613. DOI: 10.1016/J.Mtcomm.2019.100613 |
0.386 |
|
2019 |
Levine LE, Stoudt MR, Creuziger A, Phan TQ, Xu R, Kassner ME. Basis for the Bauschinger effect in copper single crystals: changes in the long-range internal stress with reverse deformation Journal of Materials Science. 54: 6579-6585. DOI: 10.1007/S10853-018-03295-6 |
0.539 |
|
2018 |
Kassner ME, Ermagan R. Strain Softening of Aluminum in Shear at Elevated Temperature Materials Science Forum. 941: 1490-1494. DOI: 10.4028/Www.Scientific.Net/Msf.941.1490 |
0.436 |
|
2017 |
Smith KK, Kassner ME, Kumar P. Long-term annealing of high purity aluminum single crystals: New insights into Harper-Dorn creep Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 705: 1-5. DOI: 10.1016/J.Msea.2017.08.045 |
0.411 |
|
2017 |
Kassner ME, Campbell CS, Ermagan R. Large-Strain Softening of Aluminum in Shear at Elevated Temperature: Influence of Dislocation Climb Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 3971-3974. DOI: 10.1007/S11661-017-4166-Y |
0.492 |
|
2017 |
Kassner ME, Smith KK, Campbell CS. Erratum to: Low-temperature creep in pure metals and alloys Journal of Materials Science. 52: 13681-13684. DOI: 10.1007/S10853-017-1454-2 |
0.38 |
|
2016 |
Phan TQ, Kelly JP, Kassner ME, Eliasson V, Graeve OA, Hodge AM. Bulk Mechanical Properties Testing of Metallic Marginal Glass Formers Journal of Metallurgy. 2016: 1-8. DOI: 10.1155/2016/6508597 |
0.343 |
|
2016 |
Smith KK, Kassner ME. Through-Thickness Compression Testing of Commercially Pure (Grade II) Titanium Thin Sheet to Large Strains Journal of Metallurgy. 2016: 1-11. DOI: 10.1155/2016/6178790 |
0.483 |
|
2016 |
Phan TQ, Levine LE, Lee IF, Xu R, Tischler JZ, Huang Y, Langdon TG, Kassner ME. Synchrotron X-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing Acta Materialia. 112: 231-241. DOI: 10.1016/J.Actamat.2016.04.035 |
0.548 |
|
2015 |
Kassner ME, Smith KK. Creep in Amorphous Metals Fundamentals of Creep in Metals and Alloys: Third Edition. 275-285. DOI: 10.1016/J.Jmrt.2014.11.003 |
0.419 |
|
2015 |
Kassner ME. Harper-Dorn Creep Fundamentals of Creep in Metals and Alloys: Third Edition. 109-128. DOI: 10.1016/J.Ijplas.2006.10.006 |
0.429 |
|
2015 |
Perez-Prado MT, Kassner ME. Creep of Intermetallics Fundamentals of Creep in Metals and Alloys: Third Edition. 189-232. DOI: 10.1016/B978-0-08-099427-7.00009-8 |
0.303 |
|
2015 |
Perez-Prado MT, Kassner ME. Superplasticity Fundamentals of Creep in Metals and Alloys: Third Edition. 139-157. DOI: 10.1016/B978-0-08-099427-7.00006-2 |
0.33 |
|
2015 |
Perez-Prado MT, Kassner ME. Diffusional Creep Fundamentals of Creep in Metals and Alloys: Third Edition. 103-108. DOI: 10.1016/B978-0-08-099427-7.00003-7 |
0.405 |
|
2015 |
Kassner ME, Smith KK, Campbell CS. Low-temperature creep in pure metals and alloys Journal of Materials Science. 50: 6539-6551. DOI: 10.1007/S10853-015-9219-2 |
0.388 |
|
2014 |
Phan TQ, Lee IF, Levine LE, Tischler JZ, Huang Y, Fox AG, Langdon TG, Kassner ME. X-ray microbeam measurements of long-range internal stresses in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing Scripta Materialia. 93: 48-51. DOI: 10.1016/J.Scriptamat.2014.09.001 |
0.429 |
|
2014 |
Zhao Y, Polyakov MN, Mecklenburg M, Kassner ME, Hodge AM. The role of grain boundary plane orientation in the β phase precipitation of an Al-Mg alloy Scripta Materialia. 89: 49-52. DOI: 10.1016/J.Scriptamat.2014.07.003 |
0.605 |
|
2014 |
Kassner ME, Smith K. Low temperature creep plasticity Journal of Materials Research and Technology. 3: 280-288. DOI: 10.1016/J.Jmrt.2014.06.009 |
0.359 |
|
2014 |
Zhao Y, Cheng IC, Kassner ME, Hodge AM. The effect of nanotwins on the corrosion behavior of copper Acta Materialia. 67: 181-188. DOI: 10.1016/J.Actamat.2013.12.030 |
0.59 |
|
2013 |
Kassner ME, Geantil P, Levine LE. Long range internal stresses in single-phase crystalline materials International Journal of Plasticity. 45: 44-60. DOI: 10.1016/J.Ijplas.2012.10.003 |
0.825 |
|
2013 |
Lee IF, Phan TQ, Levine LE, Tischler JZ, Geantil PT, Huang Y, Langdon TG, Kassner ME. Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP Acta Materialia. 61: 7741-7748. DOI: 10.1016/J.Actamat.2013.09.013 |
0.842 |
|
2013 |
Kassner ME, Perez Prado MT, Hayes TA, Jiang L, Barrabes SR, Lee IF. Elevated temperature deformation of Zr to large strains Journal of Materials Science. 48: 4492-4500. DOI: 10.1007/S10853-012-7060-4 |
0.826 |
|
2012 |
Zhao Y, Furnish TA, Kassner ME, Hodge AM. Thermal stability of highly nanotwinned copper: The role of grain boundaries and texture Journal of Materials Research. 27: 3049-3057. DOI: 10.1557/Jmr.2012.376 |
0.616 |
|
2012 |
McQueen HJ, Evangelista E, Kassner ME, Lee CS. Thermal and Mechanical Treatments of Al, Al Alloys, and Other Lightweight Metals and Alloys Journal of Metallurgy. 2012: 1-2. DOI: 10.1155/2012/294874 |
0.335 |
|
2012 |
Levine LE, Geantil P, Larson BC, Tischler JZ, Kassner ME, Liu W. Validating classical line profile analyses using microbeam diffraction from individual dislocation cell walls and cell interiors Journal of Applied Crystallography. 45: 157-165. DOI: 10.1107/S0021889812001616 |
0.786 |
|
2012 |
Gallino I, Kassner ME, Busch R. Oxidation and corrosion of highly alloyed Cu-Fe-Ni as inert anode material for aluminum electrowinning in as-cast and homogenized conditions Corrosion Science. 63: 293-303. DOI: 10.1016/J.Corsci.2012.06.013 |
0.311 |
|
2012 |
Kassner ME, Geantil P. Yield stress of 21-6-9 stainless steel over very wide ranges of strain rates and temperatures Journal of Materials Engineering and Performance. 21: 69-73. DOI: 10.1007/S11665-010-9818-7 |
0.813 |
|
2011 |
Kassner ME, Geantil P, Li X. A Study of the Quench Sensitivity of 6061-T6 and 6069-T6 Aluminum Alloys Journal of Metallurgy. 2011: 1-5. DOI: 10.1155/2011/747198 |
0.777 |
|
2011 |
Kassner ME, Geantil P, Rosen RS. Ambient temperature creep of type 304 stainless steel Journal of Engineering Materials and Technology, Transactions of the Asme. 133. DOI: 10.1115/1.4003110 |
0.82 |
|
2011 |
Sabirov I, Molina-Aldareguia JM, Jiang L, Kassner ME, Perez-Prado MT. Effect of accumulative roll bonding on plastic flow properties of commercially pure zirconium Aip Conference Proceedings. 1353: 487-492. DOI: 10.1063/1.3589562 |
0.426 |
|
2011 |
Levine LE, Geantil P, Larson BC, Tischler JZ, Kassner ME, Liu W, Stoudt MR, Tavazza F. Disordered long-range internal stresses in deformed copper and the mechanisms underlying plastic deformation Acta Materialia. 59: 5803-5811. DOI: 10.1016/J.Actamat.2011.05.056 |
0.832 |
|
2009 |
Kassner ME, Geantil P, Levine LE, Larson BC. Backstress, the Bauschinger effect and cyclic deformation Materials Science Forum. 604: 39-51. DOI: 10.4028/Www.Scientific.Net/Msf.604-605.39 |
0.837 |
|
2009 |
Kassner ME, Geantil P, Levine LE, Larson BC. Long-range internal stresses in monotonically and cyclically deformed metallic single crystals International Journal of Materials Research. 100: 333-339. DOI: 10.3139/146.110050 |
0.82 |
|
2009 |
Kassner ME, Geantil P, Hodge AM, Rosen RS. The assessment of the ambient-temperature mechanical properties of ultra-fine-grained Ag with nano-twins using microshear tests Scripta Materialia. 61: 721-724. DOI: 10.1016/J.Scriptamat.2009.06.013 |
0.827 |
|
2009 |
Kumar P, Kassner ME. Theory for very low stress ("Harper-Dorn") creep Scripta Materialia. 60: 60-63. DOI: 10.1016/J.Scriptamat.2008.08.033 |
0.42 |
|
2009 |
Sun PL, Zhao YH, Cooley JC, Kassner ME, Horita Z, Langdon TG, Lavernia EJ, Zhu YT. Effect of stacking fault energy on strength and ductility of nanostructured alloys: An evaluation with minimum solution hardening Materials Science and Engineering A. 525: 83-86. DOI: 10.1016/J.Msea.2009.06.030 |
0.421 |
|
2009 |
Kumar P, Kassner ME, Blum W, Eisenlohr P, Langdon TG. New observations on high-temperature creep at very low stresses Materials Science and Engineering A. 510: 20-24. DOI: 10.1016/J.Msea.2008.04.094 |
0.44 |
|
2009 |
Pérez-Prado MT, Zhilyaev AP, Jiang L, Kassner ME, Ruano OA. Nanostructuring pure Zr by severe plastic deformation 2008 Proceedings of the 9th Biennial Conference On Engineering Systems Design and Analysis. 1: 495. |
0.35 |
|
2008 |
Jiang L, Pérez-Prado MT, Ruano OA, Kassner ME. Bond strength of ultrafine grained Zr fabricated by accumulative roll bonding Materials Science Forum. 584: 243-248. DOI: 10.4028/Www.Scientific.Net/Msf.584-586.243 |
0.457 |
|
2008 |
Levine LE, Larson BC, Tischler JZ, Geantil P, Kassner ME, Liu W, Stoudt MR. Impact of dislocation cell elastic strain variations on line profiles from deformed copper Zeitschrift Fur Kristallographie, Supplement. 55-63. DOI: 10.1524/Zksu.2008.0008 |
0.805 |
|
2008 |
Pérez-Prado MT, Gimazov AA, Ruano OA, Kassner ME, Zhilyaev AP. Bulk nanocrystalline ω-Zr by high-pressure torsion Scripta Materialia. 58: 219-222. DOI: 10.1016/J.Scriptamat.2007.09.043 |
0.344 |
|
2008 |
Jiang L, Pérez-Prado MT, Gruber PA, Arzt E, Ruano OA, Kassner ME. Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding Acta Materialia. 56: 1228-1242. DOI: 10.1016/J.Actamat.2007.11.017 |
0.473 |
|
2008 |
Gallino I, Curiotto S, Baricco M, Kassner ME, Busch R. Homogenization of highly alloyed Cu-Fe-Ni: A phase diagram study Journal of Phase Equilibria and Diffusion. 29: 131-135. DOI: 10.1007/S11669-007-9244-1 |
0.319 |
|
2008 |
Cabibbo M, Blum W, Evangelista E, Kassner ME, Meyers MA. Transmission electron microscopy study of strain-induced low- and high-angle boundary development in equal-channel angular-pressed commercially pure aluminum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 181-189. DOI: 10.1007/S11661-007-9350-Z |
0.463 |
|
2008 |
Kumar P, Kassner ME, Langdon TG. The role of Harper-Dorn creep at high temperatures and very low stresses Journal of Materials Science. 43: 4801-4810. DOI: 10.1007/S10853-008-2680-4 |
0.424 |
|
2008 |
Jiang L, Pérez-Prado MT, Ruano OA, Kassner ME. EBSD study of annealing rolled zirconium Ceramic Transactions. 200: 555-562. |
0.389 |
|
2007 |
Pérez-Prado MT, Salort F, Jiang L, Ruano OA, Kassner ME. Nanostructuring a Zr-Hf alloy via large strain rolling Materials Science Forum. 539: 2843-2848. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.2843 |
0.633 |
|
2007 |
Jiang L, Pérez-Prado MT, Ruano OA, Kassner ME. The fabrication of bulk ultrafine-grained zirconium by accumulative roll bonding Jom. 59: 42-45. DOI: 10.1007/S11837-007-0077-5 |
0.565 |
|
2007 |
Kumar P, Kassner ME, Langdon TG. Fifty years of Harper-Dorn creep: A viable creep mechanism or a Californian artifact? Journal of Materials Science. 42: 409-420. DOI: 10.1007/S10853-006-0782-4 |
0.405 |
|
2006 |
Levine LE, Larson BC, Yang W, Kassner ME, Tischler JZ, Delos-Reyes MA, Fields RJ, Liu W. X-ray microbeam measurements of individual dislocation cell elastic strains in deformed single-crystal copper. Nature Materials. 5: 619-22. PMID 16845413 DOI: 10.1038/Nmat1698 |
0.824 |
|
2006 |
Kad BK, Gebert M, Kassner ME, Meyers MA. Microstructural evolution and grain refinement in HCP-Zr shear bands Journal De Physique. Iv : Jp. 134: 1137-1144. DOI: 10.1051/Jp4:2006134174 |
0.488 |
|
2006 |
Kad BK, Gebert JM, Perez-Prado MT, Kassner ME, Meyers MA. Ultrafine-grain-sized zirconium by dynamic deformation Acta Materialia. 54: 4111-4127. DOI: 10.1016/J.Actamat.2006.03.053 |
0.557 |
|
2006 |
Hayes TA, Kassner ME. Creep of zirconium and zirconium alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2389-2396. DOI: 10.1007/978-3-319-51097-2_9 |
0.457 |
|
2006 |
Kassner ME. Microstructure and internal stresses in cyclically deformed Al and Cu single crystals Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture. 55-56. |
0.321 |
|
2006 |
Cabibbo M, Evangelista E, Kassner ME, Meyers MA. Transmission electron microscopy study of the strain induced low and high angle boundary development in equal-channel angular-pressed commercially pure aluminum Tms Annual Meeting. 2006: 237-244. |
0.356 |
|
2005 |
Kassner ME. Recent developments in understanding the mechanism of five-power-law creep Materials Science and Engineering A. 410: 20-23. DOI: 10.1016/J.Msea.2005.08.053 |
0.428 |
|
2005 |
Kassner ME, Barrabes SR. New developments in geometric dynamic recrystallization Materials Science and Engineering A. 410: 152-155. DOI: 10.1016/J.Msea.2005.08.052 |
0.816 |
|
2005 |
McQueen HJ, Kassner ME. Elevated temperature deformation: Hot working amplifies creep Materials Science and Engineering A. 410: 58-61. DOI: 10.1016/J.Msea.2005.08.048 |
0.538 |
|
2005 |
Hayes TA, Rosen RS, Kassner ME. Creep fracture of zirconium alloys Materials Science and Technology. 1: 27-39. DOI: 10.1016/J.Jnucmat.2006.02.093 |
0.41 |
|
2005 |
Pérez-Prado MT, Barrabes SR, Kassner ME, Evangelista E. Dynamic restoration mechanisms in α-zirconium at elevated temperatures Acta Materialia. 53: 581-591. DOI: 10.1016/J.Actamat.2004.10.011 |
0.821 |
|
2005 |
Delos-Reyes MA, Kassner ME, Levine LE. X-ray diffraction and the existence of long range internal stresses 11th International Conference On Fracture 2005, Icf11. 8: 6297-6300. |
0.776 |
|
2004 |
Barrabes SR, Kassner ME, Perez-Prado MT, Evangelista E. Geometric dynamic recrystallization in α-zirconium at elevated temperatures Materials Science Forum. 467: 1145-1150. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.1145 |
0.805 |
|
2004 |
McQueen HJ, Kassner ME. Comments on 'a model of continuous dynamic recrystallization' proposed for aluminum Scripta Materialia. 51: 461-465. DOI: 10.1016/J.Scriptamat.2004.05.027 |
0.483 |
|
2004 |
Kassner ME. Taylor hardening in five-power-law creep of metals and Class M alloys Acta Materialia. 52: 1-9. DOI: 10.1016/J.Actamat.2003.08.019 |
0.495 |
|
2004 |
Barrabes S, Kassner ME, Perez-Prado MT, Wang MZ. Structural refinement by geometrical dynamic recrystallization in α-zirconium at elevated temperatures Ultrafine Grained Materials Iii. 615-620. |
0.428 |
|
2003 |
Kassner ME, Hayes TA. Creep cavitation in metals International Journal of Plasticity. 19: 1715-1748. DOI: 10.1016/S0749-6419(02)00111-0 |
0.365 |
|
2003 |
Kassner ME, Kyle K. Taylor Hardening in Five Power Law Creep of Metals and Class M Alloys Nano and Microstructural Design of Advanced Materials: a Commemorative Volume On Professor G. Thomas' Seventieth Birthday. 255-271. DOI: 10.1016/B978-008044373-7/50050-4 |
0.416 |
|
2003 |
Kennedy TC, Puttapitukporn T, Kassner ME. Dynamic effects on cavitation instabilities in solids Acta Mechanica. 165: 73-85. DOI: 10.1007/S00707-003-0036-3 |
0.355 |
|
2002 |
Wang MZ, Kassner ME. Tensile and fatigue properties of aluminum alloy sheet 6022 Journal of Materials Engineering and Performance. 11: 166-168. DOI: 10.1361/105994902770344222 |
0.394 |
|
2002 |
Kassner ME, Wang MZ, Perez-Prado MT, Alhajeri S. Large-strain softening of aluminum in shear at elevated temperature Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 3145-3153. DOI: 10.1007/S11661-002-0300-5 |
0.54 |
|
2002 |
Hayes TA, Kassner ME, Rosen RS. Steady-state creep of α-zirconium at temperatures up to 850 °C Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 337-343. DOI: 10.1007/S11661-002-0095-4 |
0.465 |
|
2002 |
Kassner ME, Pérez-Prado MT, Long M, Vecchio KS. Dislocation microstructure and internal-stress measurements by convergent-beam electron diffraction on creep-deformed Cu and Al Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 311-317. DOI: 10.1007/S11661-002-0092-7 |
0.5 |
|
2002 |
Kassner ME. The La Jolla creep workshop: Mechanisms of elevated temperature plasticity and fracture foreword Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 33: 211-212. DOI: 10.1007/S11661-002-0082-9 |
0.32 |
|
2001 |
Kassner ME, Wall MA, Delos-Reyes MA. Primary and secondary dislocation dipole heights in cyclically deformed copper single crystals Materials Science and Engineering A. 317: 28-31. DOI: 10.1016/S0921-5093(01)01195-9 |
0.808 |
|
2001 |
Kassner ME, Perez-Prado MT, Vecchio KS. Internal stress measurements by convergent beam electron diffraction on creep-deformed Al single crystals Materials Science and Engineering A. 319: 730-734. DOI: 10.1016/S0921-5093(01)00953-4 |
0.467 |
|
2001 |
Bergsma SC, Li X, Kassner ME. Semi-solid thermal transformations in Al-Si alloys: II. The optimized tensile and fatigue properties of semi-solid 357 and modified 319 aluminum alloys Materials Science and Engineering A. 297: 69-77. DOI: 10.1016/S0921-5093(00)01248-X |
0.379 |
|
2000 |
Hayes TA, Rosen RS, Kassner ME, Vecchio KS. Analysis of dry storage temperature limits for zircaloy-clad spent nuclear fuel Materials Research Society Symposium - Proceedings. 608: 23-28. DOI: 10.2172/793952 |
0.301 |
|
2000 |
Li X, Kassner ME, Bergsma SC. Recrystallization behavior of rolled ingots of 6061 and 6069 aluminum alloys Journal of Materials Engineering and Performance. 9: 416-423. DOI: 10.1361/105994900770345818 |
0.336 |
|
2000 |
Kassner ME, Pérez-Prado MT, Vecchio KS, Wall MA. Determination of internal stresses in cyclically deformed copper single crystals using convergent-beam electron diffraction and dislocation dipole separation measurements Acta Materialia. 48: 4247-4254. DOI: 10.1016/S1359-6454(00)00284-6 |
0.438 |
|
2000 |
MacMaster FJ, Chan KS, Bergsma SC, Kassner ME. Aluminum alloy 6069 part II: Fracture toughness of 6061-T6 and 6069-T6 Materials Science and Engineering A. 289: 54-59. DOI: 10.1016/S0921-5093(00)00918-7 |
0.329 |
|
2000 |
Kassner ME, Pérez-Prado MT. Five-power-law creep in single phase metals and alloys Progress in Materials Science. 45: 1-102. DOI: 10.1016/S0079-6425(99)00006-7 |
0.488 |
|
2000 |
Schrems KK, Kassner ME, Kennedy TC. Theoretical, experimental and computational mechanics of fracture in constrained interlayers Experimental Mechanics. 40: 307-311. DOI: 10.1007/Bf02327504 |
0.324 |
|
1999 |
Kassner ME, Kennedy TC, Schrems KK. The mechanism of ductile fracture in constrained thin films Materials Research Society Symposium - Proceedings. 539: 263-268. DOI: 10.1557/Proc-539-263 |
0.43 |
|
1999 |
Rosen RS, Paddon SP, Kassner ME. Variation of the yield stress of Ti alloys with strain rate at high temperatures Journal of Materials Engineering and Performance. 8: 361-367. DOI: 10.1361/105994999770346927 |
0.482 |
|
1999 |
Kassner ME, Wall MA. Microstructure and mechanisms of cyclic deformation in aluminum single crystals at 77 K: Part II. Edge dislocation dipole heights Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 777-779. DOI: 10.1007/S11661-999-1009-5 |
0.457 |
|
1999 |
Kassner ME, Kosaka Y, Hall JA. Low-cycle dwell-time fatigue in Ti-6242 Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 2383-2389. DOI: 10.1007/S11661-999-0246-Y |
0.332 |
|
1999 |
Kassner ME, Perez-Prado T, Vecchio KS. Cyclic deformation dislocation microstructures Proceedings of the Tms Fall Meeting. 3-13. |
0.379 |
|
1998 |
Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Jensen DJ, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD. Current issues in recrystallization: A review Materials Today. 1: 14-15. DOI: 10.1016/S1369-7021(98)80046-1 |
0.449 |
|
1998 |
Kassner ME, Kennedy TC, Schrems KK. The mechanism of ductile fracture in constrained thin silver films Acta Materialia. 46: 6445-6457. DOI: 10.1016/S1359-6454(98)00299-7 |
0.416 |
|
1998 |
Bergsma SC, Kassner ME, Li X, Wall MA. Strengthening in the new aluminum alloy AA 6069 Materials Science and Engineering A. 254: 112-118. DOI: 10.1016/S0921-5093(98)00701-1 |
0.412 |
|
1997 |
Roehnelt R, Kassner ME, Kennedy TC, Rosen RS. Elastic incompatibility stresses across planar and nonplanar grain boundaries applied to ductile fracture criteria under high triaxial stress Scripta Materialia. 36: 605-610. DOI: 10.1016/S1359-6462(96)00428-9 |
0.472 |
|
1997 |
Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Jensen DJ, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD. Current issues in recrystallization: a review Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 238: 219-274. DOI: 10.1016/S0921-5093(97)00424-3 |
0.35 |
|
1997 |
Kassner ME. In-situ cyclic deformation of Al single crystals in the HVEM and the concept of internal backstresses Materials Science and Engineering A. 234: 110-114. DOI: 10.1016/S0921-5093(97)00165-2 |
0.498 |
|
1997 |
Bergsma SC, Tolle MC, Kassner ME, Li X, Evangelista E. Semi-solid thermal transformations of Al-Si alloys and the resulting mechanical properties Materials Science and Engineering A. 237: 24-34. DOI: 10.1016/S0921-5093(97)00112-3 |
0.379 |
|
1997 |
Hayes TA, Kassner ME, Amick D, Rosen RS. The thermal stability of surface deformed zirconium Journal of Nuclear Materials. 246: 60-69. DOI: 10.1016/S0022-3115(97)00034-2 |
0.367 |
|
1997 |
Bergsma SC, Kassner ME. Comparison of unextruded air slip direct chill cast 6061 ingot with bar stock extruded from conventional direct chill cast 6061 ingot Journal of Materials Engineering and Performance. 6: 469-472. DOI: 10.1007/S11665-997-0118-9 |
0.413 |
|
1997 |
Kassner ME, Wall MA, Delos-Reyes MA. Microstructure and mechanisms of cyclic deformation of aluminum single crystals at 77 K Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 595-609. DOI: 10.1007/S11661-997-0045-2 |
0.817 |
|
1996 |
Bergsma SC, Kassner ME. The new aluminum alloy AA 6069 Materials Science Forum. 217: 1801-1806. DOI: 10.4028/Www.Scientific.Net/Msf.217-222.1801 |
0.404 |
|
1996 |
Wall MA, Kassner ME. In situ reversed deformation of prefatigued aluminum single crystals in the HVEM Proceedings, Annual Meeting, Electron Microscopy Society of America. 54: 1024-1025. DOI: 10.1017/s0424820100167585 |
0.385 |
|
1996 |
Bergsma SC, Kassner ME, Li X, Delos-Reyes MA, Hayes TA. The optimized mechanical properties of the new aluminum alloy AA 6069 Journal of Materials Engineering and Performance. 5: 111-116. DOI: 10.1007/Bf02647278 |
0.785 |
|
1996 |
Kassner ME, Weber FJ, Koike J, Rosen RS. Structural and residual stress changes in Mo/a-Si multilayer thin films with annealing Journal of Materials Science. 31: 2291-2299. DOI: 10.1007/Bf01152937 |
0.387 |
|
1995 |
Kassner ME. Effect of low-angle and high-angle grain boundaries on elevated temperature strength Materials Research Society Symposium - Proceedings. 362: 157-162. DOI: 10.1557/Proc-362-157 |
0.467 |
|
1995 |
Tolle MC, Kassner ME. Mechanisms of ductile fracture in pure silver under high-triaxial stress states Acta Metallurgica Et Materialia. 43: 287-297. DOI: 10.1016/0956-7151(95)90284-8 |
0.438 |
|
1995 |
McQueen HJ, Evangelista E, Jin N, Kassner ME. Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery Metallurgical and Materials Transactions A. 26: 1757-1766. DOI: 10.1007/Bf02670763 |
0.422 |
|
1995 |
Tolle MC, Kassner ME, Cerri E, Rosen RS. Mechanical behavior and microstructure of Au-Ni brazes Metallurgical and Materials Transactions A. 26: 941-948. DOI: 10.1007/Bf02649090 |
0.466 |
|
1994 |
Tolle MC, Kassner ME. Ductile fracture in pure silver under high-triaxial stresses Scripta Metallurgica Et Materiala. 31: 531-536. DOI: 10.1016/0956-716X(94)90139-2 |
0.408 |
|
1994 |
Kassner ME, McQueen HJ, Pollard J, Evangelista E, Cerri E. Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature Scripta Metallurgica Et Materialia. 31: 1331-1336. DOI: 10.1016/0956-716X(94)90113-9 |
0.498 |
|
1994 |
Kassner ME, Pollard J, Evangelista E, Cerri E. Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature and the determination of the existence of "steady-state" Acta Metallurgica Et Materialia. 42: 3223-3230. DOI: 10.1016/0956-7151(94)90420-0 |
0.523 |
|
1994 |
Delos-Reyes MA, Kassner ME. Reproducibility of small-strain creep tests of Ti 6242Si Journal of Materials Engineering and Performance. 3: 722-725. DOI: 10.1007/Bf02818371 |
0.798 |
|
1993 |
Kassner ME, McQueen HJ, Evangelista E. Geometric Dynamic Recrystallization in Aluminium and Aluminium Alloys above 0.6Tm Materials Science Forum. 151-156. DOI: 10.4028/Www.Scientific.Net/Msf.113-115.151 |
0.365 |
|
1993 |
Rosen RS, Stearns DG, Kassner ME, Koike JI, Cheng Y, Vernon SP. Kinetics of interlayer growth and changes in residual elastic strain during annealing of Mo/Si multilayers Nanostructured Materials. 3: 195-202. DOI: 10.1016/0965-9773(93)90079-Q |
0.346 |
|
1993 |
Henshall GA, Kassner ME, McQueen HJ. Comments on, "Dynamic recrystalization during hot compression in Al-Mg alloy" Scripta Metallurgica Et Materiala. 28: 151-156. DOI: 10.1016/0956-716X(93)90554-6 |
0.335 |
|
1993 |
McQueen HJ, Blum W, Straub S, Kassner ME. Dynamic grain growth a restoration mechanism in 99.999 Al Scripta Metallurgica Et Materiala. 28: 1299-1304. DOI: 10.1016/0956-716X(93)90472-5 |
0.483 |
|
1993 |
Kassner ME, Li X, McQueen HJ. The effect of homogenization and precipitation treatments on the extrudability and ambient-temperature mechanical properties of aluminum alloy AA2024 Materials Science and Engineering A. 169: 9-17. DOI: 10.1016/0921-5093(93)90593-4 |
0.366 |
|
1993 |
Langdon TG, Watanabe T, Wadsworth J, Mayo MJ, Nutt SR, Kassner ME. Future research directions for interface engineering in high temperature plasticity Materials Science and Engineering A. 166: 237-241. DOI: 10.1016/0921-5093(93)90326-A |
0.384 |
|
1993 |
Kassner ME. Role of small-angle (subgrain boundary) and large-angle (grain boundary) interfaces on 5- and 3-power-law creep Materials Science and Engineering A. 166: 81-88. DOI: 10.1016/0921-5093(93)90312-3 |
0.431 |
|
1993 |
Kassner ME, Tolle MC, Rosen RS, Henshall GA, Elmer JW. Discussion of "void nucleation Metallurgical Transactions A. 24: 1877-1878. DOI: 10.1007/Bf02657862 |
0.368 |
|
1993 |
Thiehsen KE, Kassner ME, Pollard J, Hiatt DR, Bristow BM. The effect of nickel, chromium, and primary Metallurgical Transactions A. 24: 1819-1826. DOI: 10.1007/Bf02657856 |
0.412 |
|
1992 |
Rosen RS, Viliardos MA, Kassner ME, Stearns DG, Vernon SP. Thermal stability of Mo/Si multilayers Proceedings of Spie. 1547: 212-220. DOI: 10.1117/12.51281 |
0.333 |
|
1992 |
Tolle MC, Kassner ME. Tensile properties of thin Au-Ni brazes between strong base materials Scripta Metallurgica Et Materiala. 26: 1281-1284. DOI: 10.1016/0956-716X(92)90577-2 |
0.464 |
|
1992 |
Henshall GA, Kassner ME, McQueen HJ. Dynamic restoration mechanisms in Al-5.8 At. Pct Mg deformed to large strains in the solute drag regime Metallurgical Transactions A. 23: 881-889. DOI: 10.1007/Bf02675565 |
0.534 |
|
1992 |
Kansal U, Kassner ME, Hiatt DR, Bristow BM. Microstructural banding in thermally and mechanically processed titanium 6242 Journal of Materials Engineering and Performance. 1: 393-398. DOI: 10.1007/Bf02652394 |
0.383 |
|
1992 |
Rosen RS, Kassner ME, Thiehsen KE. The mechanical behaviour of U-6Nb alloy and AISI 1045 and 1215 steels at high strain rates Journal of Materials Science Letters. 11: 125-128. DOI: 10.1007/Bf00724665 |
0.45 |
|
1991 |
Kassner ME, Wall MA, Sleeswyk AW. Some observations during in-situ reversed deformation of aluminum single crystals in the HVEM using the X-Y method Scripta Metallurgica Et Materiala. 25: 1701-1706. DOI: 10.1016/0956-716X(91)90478-J |
0.389 |
|
1991 |
Kassner ME, Li X. The effect of grain size on the elevated temperature yield strength of polycrystalline aluminum Scripta Metallurgica Et Materiala. 25: 2833-2838. DOI: 10.1016/0956-716X(91)90165-W |
0.4 |
|
1991 |
Kassner ME, Nguyen NQ, Henshall GA, McQueen HJ. The effects of temperature and strain rate on extended ductility of aluminum Materials Science and Engineering A. 132: 97-105. DOI: 10.1016/0921-5093(91)90366-U |
0.446 |
|
1991 |
Kassner ME. Classic dislocation-hardening equations that describe elevated temperature plasticity . 309-326. |
0.482 |
|
1990 |
Rosen RS, Kassner ME. Diffusion welding of silver interlayers coated onto base metals by planar-magnetron sputtering Journal of Vacuum Science and Technology a: Vacuum, Surfaces and Films. 8: 19-29. DOI: 10.1116/1.577064 |
0.377 |
|
1990 |
Kassner ME, Rosen RS, Henshall GA, Challenger KD. Time-dependent failure of silver-interlayer diffusion welds between elastically-deforming base metals Scripta Metallurgica Et Materiala. 24: 587-592. DOI: 10.1016/0956-716X(90)90206-V |
0.343 |
|
1990 |
Kassner ME, Rosen RS, Henshall GA. Delayed mechanical failure of silver-interlayer diffusion bonds Metallurgical Transactions. a, Physical Metallurgy and Materials Science. 21: 3085-3100. DOI: 10.1007/Bf02647306 |
0.405 |
|
1990 |
Kassner ME. A case for Taylor hardening during primary and steady-state creep in aluminium and type 304 stainless steel Journal of Materials Science. 25: 1997-2003. DOI: 10.1007/Bf01045755 |
0.513 |
|
1989 |
Kassner ME, Myshlyaev MM, McQueen HJ. Large-strain torsional deformation in aluminum at elevated temperatures Materials Science and Engineering A. 108: 45-61. DOI: 10.1016/0921-5093(89)90405-X |
0.541 |
|
1989 |
Kassner ME. Large-strain deformation of aluminum single crystals at elevated temperature as a test of the geometric-dynamic-recrystallization concept Metallurgical Transactions A. 20: 2182-2185. DOI: 10.1007/Bf02650307 |
0.479 |
|
1989 |
Kassner ME. The rate dependence and microstructure of high-purity silver deformed to large strains between 0.16 and 0.30 T m Metallurgical Transactions A. 20: 2001-2010. DOI: 10.1007/Bf02650286 |
0.483 |
|
1988 |
Kassner ME, Oldani JJ. High-strain steady-state flow in silver at ambient and near-ambient temperatures Scripta Metallurgica. 22: 41-46. DOI: 10.1016/S0036-9748(88)80303-X |
0.356 |
|
1988 |
Elmer JW, Kassner ME, Rosen RS. BEHAVIOR OF SILVER-AIDED DIFFUSION-WELDED JOINTS UNDER TENSILE AND TORSIONAL LOADS. Welding Journal (Miami, Fla). 67. |
0.366 |
|
1987 |
Kassner ME, McMahon ME. The dislocation microstructure of aluminum Metallurgical Transactions A. 18: 835-846. DOI: 10.1007/Bf02646925 |
0.464 |
|
1987 |
Kassner ME, Sleeswyk AW, Echer CJ. Cyclic X‐Y mechanical tests: A new method to perform in situ reversed‐deformation experiments in the high‐voltage electron microscope Journal of Electron Microscopy Technique. 5: 189-198. DOI: 10.1002/Jemt.1060050209 |
0.459 |
|
1987 |
Kassner ME, McMahon ME. DISLOCATION MICROSTRUCTURE OF ALUMINUM DEFORMED TO VERY LARGE STEADY-STATE CREEP STRAINS Metallurgical Transactions. a, Physical Metallurgy and Materials Science. 18: 835-846. |
0.38 |
|
1987 |
Elmer JW, Kassner ME, Rosen RS, Gallegos GF. BEHAVIOR OF THIN SILVER JOINTS UNDER TENSILE AND TORSIONAL LOADS . 265. |
0.337 |
|
1986 |
Kassner ME, Elmer JW, Echer CJ. Changes in the subboundary mesh size with creep strain in 304 stainless steel Metallurgical Transactions A. 17: 2093-2097. DOI: 10.1007/Bf02645011 |
0.406 |
|
1986 |
Kassner ME. POWER-LAW-BREAKDOWN AND THE VARIATION OF THE STRAIN-RATE SENSITIVITY OF ANNEALED NICKEL OVER A WIDE RANGE OF TEMPERATURE Res Mechanica: International Journal of Structural Mechanics and Materials Science. 18: 179-188. |
0.314 |
|
1986 |
Kassner ME, Elmer JW. VARIATION IN THE SPACING OF DISLOCATIONS IN SUBGRAIN BOUNDARIES WITH CREEP STRAIN IN TYPE 304 STAINLESS STEEL . 2: 953-958. |
0.358 |
|
1985 |
Kassner ME, Ziaai-Moayyed AA, Miller AK. Some trends observed in the elevated-temperature kinematic and isotropic hardening of type 304 stainless steel Metallurgical Transactions A. 16: 1069-1076. DOI: 10.1007/Bf02811676 |
0.428 |
|
1984 |
Kassner ME. Power-law breakdown and the dislocation microstructure in type 304 stainless steel Materials Letters. 2: 451-454. DOI: 10.1016/0167-577X(84)90161-7 |
0.393 |
|
1984 |
Kassner ME, Breithaupt RD. YIELD STRESS OF TYPE 21-6-9 STAINLESS STEEL OVER A WIDE RANGE OF STRAIN RATE (10** minus **5 minus 10**4 s** minus **1) AND TEMPERATURE Institute of Physics Conference Series. 47-54. |
0.317 |
|
1983 |
Kassner ME. SIMPLE CONSTITUTIVE EQUATION TO MODEL THE LOW TEMPERATURE YIELD STRENGTH OF TYPE 21-6-9 STAINLESS STEEL Journal of Engineering Materials and Technology, Transactions of the Asme. 105: 231-233. DOI: 10.1115/1.3225651 |
0.419 |
|
1983 |
Kassner ME, Mukherjee AK. Rate-dependent plastic flow in polycrystalline silver at ambient temperature Scripta Metallurgica. 17: 741-744. DOI: 10.1016/0036-9748(83)90485-4 |
0.464 |
|
1983 |
Kassner ME. Deformation in punched specimens of type 304 stainless steel Scripta Metallurgica. 17: 425-426. DOI: 10.1016/0036-9748(83)90187-4 |
0.384 |
|
1982 |
Kassner ME. Additional data and insight bearing on the relation between dislocation substructure and power law breakdown Scripta Metallurgica. 16: 265-266. DOI: 10.1016/0036-9748(82)90347-7 |
0.322 |
|
1982 |
KASSNER ME, MILLER AK, SHERBY OD. SEPARATE ROLES OF SUBGRAINS AND FOREST DISLOCATIONS IN THE ISOTROPIC HARDENING OF TYPE 304 STAINLESS STEEL Metall Trans A. 1977-1986. DOI: 10.1007/Bf02645943 |
0.498 |
|
Show low-probability matches. |