| Year |
Citation |
Score |
| 2021 |
Wang L, Mohammadpour M, Gao X, Lavoie J, Kleine K, Kong F, Kovacevic R. Adjustable Ring Mode (ARM) laser welding of stainless steels Optics and Lasers in Engineering. 137: 106360. DOI: 10.1016/J.Optlaseng.2020.106360 |
0.614 |
|
| 2020 |
Wang L, Mohammadpour M, Yang B, Gao X, Lavoie JP, Kleine K, Kong F, Kovacevic R. Monitoring of keyhole entrance and molten pool with quality analysis during adjustable ring mode laser welding. Applied Optics. 59: 1576-1584. PMID 32225662 DOI: 10.1364/Ao.383232 |
0.619 |
|
| 2020 |
Liu W, Bell A, Wang Z, Zhang Z, Kovacevic R. Evaluation of the slurry erosion resistance of the body materials of oil & gas drill bits with a modified abrasive waterjet Wear. 203364. DOI: 10.1016/J.Wear.2020.203364 |
0.328 |
|
| 2020 |
Mohammadpour M, Yang B, Wang H, Forrest J, Poss M, Carlson B, Kovacevic R. Influence of laser beam inclination angle on galvanized steel laser braze quality Optics & Laser Technology. 129: 106303. DOI: 10.1016/J.Optlastec.2020.106303 |
0.453 |
|
| 2020 |
Zhang Z, Kong F, Kovacevic R. Laser hot-wire cladding of Co-Cr-W metal cored wire Optics and Lasers in Engineering. 128: 105998. DOI: 10.1016/J.Optlaseng.2019.105998 |
0.619 |
|
| 2020 |
Mohammadpour M, Wang L, Kong F, Kovacevic R. Adjustable ring mode and single beam fiber lasers: a performance comparison Manufacturing Letters. 25: 50-55. DOI: 10.1016/J.Mfglet.2020.07.003 |
0.564 |
|
| 2019 |
Hatamleh MI, Mahadevan J, Malik A, Qian D, Kovacevic R. Prediction of Residual Stress Random Fields for Selective Laser Melted A357 Aluminum Alloy Subjected to Laser Shock Peening Journal of Manufacturing Science and Engineering. 141. DOI: 10.1115/1.4044418 |
0.446 |
|
| 2019 |
Zhang Z, Kovacevic R. Laser cladding of iron-based erosion resistant metal matrix composites Journal of Manufacturing Processes. 38: 63-75. DOI: 10.1016/J.Jmapro.2019.01.001 |
0.362 |
|
| 2019 |
Akbari M, Kovacevic R. Closed loop control of melt pool width in robotized laser powder–directed energy deposition process The International Journal of Advanced Manufacturing Technology. 104: 2887-2898. DOI: 10.1007/S00170-019-04195-Y |
0.365 |
|
| 2019 |
Zhang Z, Kovacevic R. A thermo-mechanical model for simulating the temperature and stress distribution during laser cladding process The International Journal of Advanced Manufacturing Technology. 102: 457-472. DOI: 10.1007/S00170-018-3127-Y |
0.399 |
|
| 2018 |
Derakhshan ED, Yazdian N, Craft B, Smith S, Kovacevic R. Numerical simulation and experimental validation of residual stress and welding distortion induced by laser-based welding processes of thin structural steel plates in butt joint configuration Optics & Laser Technology. 104: 170-182. DOI: 10.1016/J.Optlastec.2018.02.026 |
0.498 |
|
| 2018 |
Mohammadpour M, Yazdian N, Yang G, Wang H, Carlson B, Kovacevic R. Effect of dual laser beam on dissimilar welding-brazing of aluminum to galvanized steel Optics & Laser Technology. 98: 214-228. DOI: 10.1016/J.Optlastec.2017.07.035 |
0.519 |
|
| 2018 |
Yang G, Sheng J, Tong W, Carlson BE, Wang H, Kovacevic R. Tensile behavior of fusion-brazed aluminum alloy coach-peel joints fabricated by a dual-beam laser Journal of Materials Processing Technology. 261: 184-192. DOI: 10.1016/J.Jmatprotec.2018.06.016 |
0.386 |
|
| 2018 |
Mohammadpour M, Yazdian N, Wang H, Carlson B, Kovacevic R. Effect of filler wire composition on performance of Al/Galvanized steel joints by twin spot laser welding-brazing method Journal of Manufacturing Processes. 31: 20-34. DOI: 10.1016/J.Jmapro.2017.11.007 |
0.534 |
|
| 2018 |
Yazdian N, Mohammadpour M, Kong F, Kovacevic R. Hybrid laser/arc girth welding of 304L stainless steel tubes, part 1 – Pore mitigation, thermal analysis and mechanical properties International Journal of Pressure Vessels and Piping. 163: 75-93. DOI: 10.1016/J.Ijpvp.2018.05.003 |
0.638 |
|
| 2018 |
Yazdian N, Mohammadpour M, Razavi R, Kovacevic R. Hybrid laser/arc welding of 304L stainless steel tubes, part 2 – Effect of filler wires on microstructure and corrosion behavior International Journal of Pressure Vessels and Piping. 163: 45-54. DOI: 10.1016/J.Ijpvp.2018.04.005 |
0.454 |
|
| 2018 |
Akbari M, Kovacevic R. An investigation on mechanical and microstructural properties of 316LSi parts fabricated by a robotized laser/wire direct metal deposition system Additive Manufacturing. 23: 487-497. DOI: 10.1016/J.Addma.2018.08.031 |
0.405 |
|
| 2018 |
Atabaki MM, Yazdian N, Kovacevic R. Hybrid laser/arc welding of thick high-strength steel in different configurations Advances in Manufacturing. 6: 176-188. DOI: 10.1007/S40436-017-0193-6 |
0.504 |
|
| 2018 |
Akbari M, Kovacevic R. Joining of elements fabricated by a robotized laser/wire directed energy deposition process by using an autogenous laser welding The International Journal of Advanced Manufacturing Technology. 100: 2971-2980. DOI: 10.1007/S00170-018-2891-Z |
0.484 |
|
| 2018 |
Yazdian N, Derakhshan ED, Kovacevic R. Numerical prediction and experimental analysis of the residual stress fields and generated distortion in hybrid laser/arc welded thick plates of high-strength steels The International Journal of Advanced Manufacturing Technology. 98: 2725-2735. DOI: 10.1007/S00170-018-2404-0 |
0.45 |
|
| 2018 |
Mohammed S, Rajamure RS, Zhang Z, Balu P, Dahotre NB, Kovacevic R. Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements The International Journal of Advanced Manufacturing Technology. 97: 4043-4054. DOI: 10.1007/S00170-018-2227-Z |
0.773 |
|
| 2017 |
Mazar Atabaki M, Leggett PG, Yang G, Kovacevic R. Shallow penetration laser-based brazing of aluminum alloy (AA 6111) Journal of Laser Applications. 29: 012019. DOI: 10.2351/1.4976648 |
0.49 |
|
| 2017 |
Ding Y, Dwivedi R, Kovacevic R. Process planning for 8-axis robotized laser-based direct metal deposition system: A case on building revolved part Robotics and Computer-Integrated Manufacturing. 44: 67-76. DOI: 10.1016/J.Rcim.2016.08.008 |
0.548 |
|
| 2017 |
Yang G, Ma J, Carlson BE, Wang H, Atabaki MM, Kovacevic R. Decreasing the surface roughness of aluminum alloy welds fabricated by a dual beam laser Materials & Design. 127: 287-296. DOI: 10.1016/J.Matdes.2017.04.085 |
0.45 |
|
| 2017 |
Yang G, Ma J, Carlson B, Wang H, Kovacevic R. Effect of laser beam configuration on microstructure evolution and joint performance in laser joining AA 6111 panels Materials & Design. 123: 197-210. DOI: 10.1016/J.Matdes.2017.03.050 |
0.445 |
|
| 2017 |
Yang G, Ma J, Wang H, Carlson B, Kovacevic R. Studying the effect of lubricant on laser joining of AA 6111 panels with the addition of AA 4047 filler wire Materials & Design. 116: 176-187. DOI: 10.1016/J.Matdes.2016.12.014 |
0.487 |
|
| 2017 |
Zhang Z, Yu T, Kovacevic R. Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC Applied Surface Science. 410: 225-240. DOI: 10.1016/J.Apsusc.2017.03.137 |
0.402 |
|
| 2017 |
Ding Y, Akbari M, Kovacevic R. Process planning for laser wire-feed metal additive manufacturing system The International Journal of Advanced Manufacturing Technology. 95: 355-365. DOI: 10.1007/S00170-017-1179-Z |
0.378 |
|
| 2016 |
Fortier A, Kong F, Kovacevic R. Fundamental FEM Modeling Approach of Residual Stress Propagation in Sn-Based Electroplated Films Prone to Sn Whiskers Growth Ieee Transactions On Components, Packaging and Manufacturing Technology. DOI: 10.1109/Tcpmt.2016.2544927 |
0.483 |
|
| 2016 |
Ding Y, Huang W, Kovacevic R. An on-line shape-matching weld seam tracking system Robotics and Computer-Integrated Manufacturing. 42: 103-112. DOI: 10.1016/J.Rcim.2016.05.012 |
0.366 |
|
| 2016 |
Atabaki MM, Yazdian N, Ma J, Kovacevic R. High power laser welding of thick steel plates in a horizontal butt joint configuration Optics and Laser Technology. 83: 1-12. DOI: 10.1016/J.Optlastec.2016.03.016 |
0.506 |
|
| 2016 |
Ma J, Atabaki MM, Liu W, Pillai R, Kumar B, Vasudevan U, Kovacevic R. Laser-based welding of 17-4 PH martensitic stainless steel in a tubular butt joint configuration with a built-in backing bar Optics and Laser Technology. 82: 38-52. DOI: 10.1016/J.Optlastec.2016.02.012 |
0.467 |
|
| 2016 |
Ding Y, Zhang X, Kovacevic R. A laser-based machine vision measurement system for laser forming Measurement: Journal of the International Measurement Confederation. 82: 345-354. DOI: 10.1016/J.Measurement.2015.10.036 |
0.405 |
|
| 2016 |
Zhang Z, Farahmand P, Kovacevic R. Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laser Materials & Design. 109: 686-699. DOI: 10.1016/J.Matdes.2016.07.114 |
0.487 |
|
| 2016 |
Atabaki MM, Yazdian N, Kovacevic R. Partial penetration laser-based welding of aluminum alloy (AA 5083-H32) Optik. 127: 6782-6804. DOI: 10.1016/J.Ijleo.2016.05.007 |
0.516 |
|
| 2016 |
Ding Y, Warton J, Kovacevic R. Development of sensing and control system for robotized laser-based direct metal addition system Additive Manufacturing. 10: 24-35. DOI: 10.1016/J.Addma.2016.01.002 |
0.352 |
|
| 2016 |
Zhang Z, Kovacevic R. Multiresponse Optimization of Laser Cladding Steel + VC Using Grey Relational Analysis in the Taguchi Method Jom. 68: 1762-1773. DOI: 10.1007/S11837-016-1942-X |
0.457 |
|
| 2016 |
Ding Y, Kovacevic R. Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing Jom. 1-6. DOI: 10.1007/S11837-016-1929-7 |
0.347 |
|
| 2015 |
Farahmand P, Kovacevic R. Corrosion and wear behavior of laser cladded Ni-WC coatings Surface and Coatings Technology. 276: 121-135. DOI: 10.1016/J.Surfcoat.2015.06.039 |
0.414 |
|
| 2015 |
Mazar Atabaki M, Ma J, Liu W, Kovacevic R. Hybrid laser/arc welding of advanced high strength steel to aluminum alloy by using structural transition insert Materials & Design. 75: 120-135. DOI: 10.1016/J.Matdes.2015.03.022 |
0.491 |
|
| 2015 |
Liu W, Ma J, Mazar Atabaki M, Kovacevic R. Joining of advanced high-strength steel to AA 6061 alloy by using Fe/Al structural transition joint Materials & Design. 68: 146-157. DOI: 10.1016/J.Matdes.2014.12.028 |
0.442 |
|
| 2015 |
Mazar Atabaki M, Ma J, Liu W, Kovacevic R. Pore formation and its mitigation during hybrid laser/arc welding of advanced high strength steel Materials & Design. 67: 509-521. DOI: 10.1016/J.Matdes.2014.10.072 |
0.498 |
|
| 2015 |
Jamshidinia M, Wang L, Tong W, Ajlouni R, Kovacevic R. Fatigue properties of a dental implant produced by electron beam melting® (EBM) Journal of Materials Processing Technology. 226: 255-263. DOI: 10.1016/J.Jmatprotec.2015.07.013 |
0.787 |
|
| 2015 |
Jamshidinia M, Atabaki MM, Zahiri M, Kelly S, Sadek A, Kovacevic R. Microstructural modification of Ti-6Al-4V by using an in-situ printed heat sink in Electron Beam Melting® (EBM) Journal of Materials Processing Technology. 226: 264-271. DOI: 10.1016/J.Jmatprotec.2015.07.006 |
0.796 |
|
| 2015 |
Farahmand P, Kovacevic R. Laser cladding assisted with an induction heater (LCAIH) of Ni–60%WC coating Journal of Materials Processing Technology. 222: 244-258. DOI: 10.1016/J.Jmatprotec.2015.02.026 |
0.421 |
|
| 2015 |
Harooni M, Ma J, Carlson B, Kovacevic R. Two-pass laser welding of AZ31B magnesium alloy Journal of Materials Processing Technology. 216: 114-122. DOI: 10.1016/J.Jmatprotec.2014.08.028 |
0.828 |
|
| 2015 |
Liu W, Ma J, Atabaki MM, Pillai R, Kumar B, Vasudevan U, Sreshta H, Kovacevic R. Hybrid Laser-arc Welding of 17-4 PH Martensitic Stainless Steel Lasers in Manufacturing and Materials Processing. 2: 74-90. DOI: 10.1007/S40516-015-0007-2 |
0.311 |
|
| 2015 |
Liu W, Ma J, Kong F, Liu S, Kovacevic R. Numerical Modeling and Experimental Verification of Residual Stress in Autogenous Laser Welding of High-Strength Steel Lasers in Manufacturing and Materials Processing. 2: 24-42. DOI: 10.1007/S40516-015-0005-4 |
0.343 |
|
| 2015 |
Farahmand P, Frosell T, McGregor M, Kovacevic R. Comparative study of the slurry erosion behavior of laser cladded Ni-WC coating modified by nanocrystalline WC and La2O3 The International Journal of Advanced Manufacturing Technology. 79: 1607-1621. DOI: 10.1007/S00170-015-6936-2 |
0.387 |
|
| 2015 |
Liu W, Ma J, Liu S, Kovacevic R. Experimental and numerical investigation of laser hot wire welding The International Journal of Advanced Manufacturing Technology. 78: 1485-1499. DOI: 10.1007/S00170-014-6756-9 |
0.561 |
|
| 2014 |
Atabaki MM, Nikodinovski M, Chenier P, Kovacevic R. Welding of Aluminum Alloys to Steels: An Overview Journal of Molecular Spectroscopy. 14: 59-78. DOI: 10.1515/Jmsp-2014-0007 |
0.428 |
|
| 2014 |
Liu S, Farahmand P, Kovacevic R. Optical monitoring of high power direct diode laser cladding Optics & Laser Technology. 64: 363-376. DOI: 10.1016/J.Optlastec.2014.06.002 |
0.512 |
|
| 2014 |
Farahmand P, Kovacevic R. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser Optics and Laser Technology. 63: 154-168. DOI: 10.1016/J.Optlastec.2014.04.016 |
0.43 |
|
| 2014 |
Liu S, Liu W, Harooni M, Ma J, Kovacevic R. Real-time monitoring of laser hot-wire cladding of Inconel 625 Optics and Laser Technology. 62: 124-134. DOI: 10.1016/J.Optlastec.2014.03.007 |
0.809 |
|
| 2014 |
Mazar Atabaki M, Nikodinovski M, Chenier P, Ma J, Liu W, Kovacevic R. Experimental and numerical investigations of hybrid laser arc welding of aluminum alloys in the thick T-joint configuration Optics & Laser Technology. 59: 68-92. DOI: 10.1016/J.Optlastec.2013.12.008 |
0.507 |
|
| 2014 |
Liu W, Liu S, Ma J, Kovacevic R. Real-time monitoring of the laser hot-wire welding process Optics & Laser Technology. 57: 66-76. DOI: 10.1016/J.Optlastec.2013.09.026 |
0.555 |
|
| 2014 |
Harooni M, Carlson B, Kovacevic R. Dual-beam laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration Optics and Laser Technology. 56: 247-255. DOI: 10.1016/J.Optlastec.2013.08.018 |
0.822 |
|
| 2014 |
Harooni M, Carlson B, Kovacevic R. Detection of defects in laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration by a real-time spectroscopic analysis Optics and Lasers in Engineering. 56: 54-66. DOI: 10.1016/J.Optlaseng.2013.11.015 |
0.82 |
|
| 2014 |
Mazar Atabaki M, Ma J, Yang G, Kovacevic R. Hybrid laser/arc welding of advanced high strength steel in different butt joint configurations Materials & Design. 64: 573-587. DOI: 10.1016/J.Matdes.2014.08.011 |
0.522 |
|
| 2014 |
Harooni M, Carlson B, Strohmeier BR, Kovacevic R. Pore formation mechanism and its mitigation in laser welding of AZ31B magnesium alloy in lap joint configuration Materials and Design. 58: 265-276. DOI: 10.1016/J.Matdes.2014.01.050 |
0.825 |
|
| 2014 |
Ma J, Harooni M, Carlson B, Kovacevic R. Dissimilar joining of galvanized high-strength steel to aluminum alloy in a zero-gap lap joint configuration by two-pass laser welding Materials and Design. 58: 390-401. DOI: 10.1016/J.Matdes.2014.01.046 |
0.83 |
|
| 2014 |
Liu W, Ma J, Yang G, Kovacevic R. Hybrid laser-arc welding of advanced high-strength steel Journal of Materials Processing Technology. 214: 2823-2833. DOI: 10.1016/J.Jmatprotec.2014.06.018 |
0.429 |
|
| 2014 |
Ma J, Kong F, Liu W, Carlson B, Kovacevic R. Study on the strength and failure modes of laser welded galvanized DP980 steel lap joints Journal of Materials Processing Technology. 214: 1696-1709. DOI: 10.1016/J.Jmatprotec.2014.03.018 |
0.636 |
|
| 2014 |
Jamshidinia M, Wang L, Tong W, Kovacevic R. The bio-compatible dental implant designed by using non-stochastic porosity produced by Electron Beam Melting® (EBM) Journal of Materials Processing Technology. 214: 1728-1739. DOI: 10.1016/J.Jmatprotec.2014.02.025 |
0.778 |
|
| 2014 |
Asgharifar M, Kong F, Carlson B, Kovacevic R. Dynamic analysis of adhesively bonded joint under solid projectile impact International Journal of Adhesion and Adhesives. 50: 17-31. DOI: 10.1016/J.Ijadhadh.2013.12.022 |
0.794 |
|
| 2014 |
Farahmand P, Liu S, Zhang Z, Kovacevic R. Laser cladding assisted by induction heating of Ni–WC composite enhanced by nano-WC and La2O3 Ceramics International. 40: 15421-15438. DOI: 10.1016/J.Ceramint.2014.06.097 |
0.51 |
|
| 2014 |
Liu S, Kovacevic R. Statistical analysis and optimization of processing parameters in high-power direct diode laser cladding International Journal of Advanced Manufacturing Technology. 74: 867-878. DOI: 10.1007/S00170-014-6041-Y |
0.519 |
|
| 2014 |
Liu S, Kong F, Shi S, Kovacevic R. Study of a hollow laser beam for cladding The International Journal of Advanced Manufacturing Technology. 73: 147-159. DOI: 10.1007/S00170-014-5763-1 |
0.635 |
|
| 2014 |
Asgharifar M, Kong F, Abramovitch J, Carlson B, Kovacevic R. Wettability characterization and adhesion enhancement of arc-treated surface of aluminum alloys International Journal of Advanced Manufacturing Technology. 71: 1463-1481. DOI: 10.1007/S00170-013-5561-1 |
0.818 |
|
| 2014 |
Jamshidinia M, Kovacevic R. The influence of heat accumulation on the surface roughness in additive manufacturing by electron beam melting® (EBM) Proceedings - Aspe 2014 Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. 45-50. |
0.803 |
|
| 2013 |
Joshi GV, Duan Y, Neidigh J, Koike M, Chahine G, Kovacevic R, Okabe T, Griggs JA. Fatigue testing of electron beam-melted Ti-6Al-4V ELI alloy for dental implants. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 101: 124-30. PMID 23077086 DOI: 10.1002/Jbm.B.32825 |
0.602 |
|
| 2013 |
Kong F, Kovacevic R. Measurement of surface residual stresses and testing mechanical properties of high-strength steel butt joints obtained by hybrid laser/gas metal arc welding Journal of Strain Analysis For Engineering Design. 48: 437-445. DOI: 10.1177/0309324713496085 |
0.626 |
|
| 2013 |
Liu W, Kong F, Kovacevic R. Residual stress analysis and weld bead shape study in laser welding of high strength steel Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/MSEC2013-1102 |
0.344 |
|
| 2013 |
Farahmand P, Balu P, Kong F, Kovacevic R. Investigation of thermal cycle and hardness distribution in the laser cladding of AISI H13 tool steel produced by a high power direct diode laser Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2013-62193 |
0.77 |
|
| 2013 |
Jamshidinia M, Kong F, Kovacevic R. Numerical modeling of heat distribution in the electron beam melting® of Ti-6Al-4V Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4025746 |
0.816 |
|
| 2013 |
Balu P, Leggett P, Hamid S, Kovacevic R. Multi-response optimization of laser-based powder deposition of multi-track single layer hastelloy C-276 Materials and Manufacturing Processes. 28: 173-182. DOI: 10.1080/10426914.2012.677908 |
0.757 |
|
| 2013 |
Balu P, Kong F, Hamid S, Kovacevic R. Finite element modeling of solid particle erosion in AISI 4140 steel and nickel-tungsten carbide composite material produced by the laser-based powder deposition process Tribology International. 62: 18-28. DOI: 10.1016/J.Triboint.2013.01.021 |
0.789 |
|
| 2013 |
Baidridge T, Poling G, Foroozmehr E, Kovacevic R, Metz T, Kadekar V, Gupta MC. Laser cladding of Inconel 690 on Inconel 600 superalloy for corrosion protection in nuclear applications Optics and Lasers in Engineering. 51: 180-184. DOI: 10.1016/J.Optlaseng.2012.08.006 |
0.797 |
|
| 2013 |
Asgharifar M, Mazar Atabaki M, Kovacevic R. Characterization of the surface topography of arc-treated aluminum alloys by fractal geometry Manufacturing Letters. 2: 26-29. DOI: 10.1016/J.Mfglet.2014.01.004 |
0.806 |
|
| 2013 |
Ma J, Kong F, Carlson B, Kovacevic R. Two-pass laser welding of galvanized high-strength dual-phase steel for a zero-gap lap joint configuration Journal of Materials Processing Technology. 213: 495-507. DOI: 10.1016/J.Jmatprotec.2012.10.019 |
0.65 |
|
| 2013 |
Kong F, Liu W, Ma J, Levert E, Kovacevic R. Feasibility study of laser welding assisted by filler wire for narrow-gap butt-jointed plates of high-strength steel Welding in the World. 57: 693-699. DOI: 10.1007/S40194-013-0068-9 |
0.625 |
|
| 2013 |
Balu P, Hamid S, Kovacevic R. An experimental study on slurry erosion resistance of single and multilayered deposits of Ni-WC produced by laser-based powder deposition process Journal of Materials Engineering and Performance. 22: 3398-3413. DOI: 10.1007/S11665-013-0620-1 |
0.757 |
|
| 2013 |
Kong F, Santhanakrishnan S, Kovacevic R. Numerical modeling and experimental study of thermally induced residual stress in the direct diode laser heat treatment of dual-phase 980 steel International Journal of Advanced Manufacturing Technology. 68: 2419-2430. DOI: 10.1007/S00170-013-4859-3 |
0.782 |
|
| 2013 |
Balu P, Hamid S, Kovacevic R. Finite element modeling of heat transfer in single and multilayered deposits of Ni-WC produced by the laser-based powder deposition process International Journal of Advanced Manufacturing Technology. 68: 85-98. DOI: 10.1007/S00170-012-4710-2 |
0.776 |
|
| 2013 |
Santhanakrishnan S, Kong F, Kovacevic R. An experimentally based thermo-kinetic phase transformation model for multi-pass laser heat treatment by using high power direct diode laser International Journal of Advanced Manufacturing Technology. 64: 219-238. DOI: 10.1007/S00170-012-4029-Z |
0.795 |
|
| 2013 |
Jamshidinia M, Kong F, Kovacevic R. The numerical modeling of fatigue properties of a bio-compatible dental implant produced by Electron Beam Melting® (EBM) 24th International Sff Symposium - An Additive Manufacturing Conference, Sff 2013. 791-804. |
0.778 |
|
| 2013 |
Harooni M, Carlson B, Kovacevic R. Effect of process parameters on the weld quality in laser welding of AZ31B magnesium alloy in lap joint configuration Icaleo 2013 - 32nd International Congress On Applications of Lasers and Electro-Optics. 509-519. |
0.821 |
|
| 2012 |
Asgharifar M, Abramovitch J, Kong F, Carlson B, Kovacevic R. Wettability enhancement of aluminum alloys via plasma ARC discharge Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 449-455. DOI: 10.1115/MSEC2012-7331 |
0.804 |
|
| 2012 |
Jamshidinia M, Kong F, Kovacevic R. Temperature distribution and fluid flow modeling of electron beam melting® (EBM) Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 3089-3101. DOI: 10.1115/IMECE2012-89440 |
0.788 |
|
| 2012 |
Harooni M, Kong F, Carlson B, Kovacevic R. Mitigation of pore generation in laser welding of magnesium alloy AZ31B in lap joint configuration Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 3: 919-927. DOI: 10.1115/IMECE2012-89073 |
0.81 |
|
| 2012 |
Kong F, Ma J, Carlson B, Kovacevic R. Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration Optics & Laser Technology. 44: 2186-2196. DOI: 10.1016/J.Optlastec.2012.03.003 |
0.64 |
|
| 2012 |
Ma J, Kong F, Kovacevic R. Finite-element thermal analysis of laser welding of galvanized high-strength steel in a zero-gap lap joint configuration and its experimental verification Materials & Design (1980-2015). 36: 348-358. DOI: 10.1016/J.Matdes.2011.11.027 |
0.66 |
|
| 2012 |
Santhanakrishnan S, Kovacevic R. Hardness prediction in multi-pass direct diode laser heat treatment by on-line surface temperature monitoring Journal of Materials Processing Technology. 212: 2261-2271. DOI: 10.1016/J.Jmatprotec.2012.06.002 |
0.767 |
|
| 2012 |
Balu P, Leggett P, Kovacevic R. Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process Journal of Materials Processing Technology. 212: 1598-1610. DOI: 10.1016/J.Jmatprotec.2012.02.020 |
0.751 |
|
| 2012 |
Fortier A, Kovacevic R. Internal microstructure investigation of tin whisker growth using FIB technology Journal of Electronic Materials. 41: 2029-2034. DOI: 10.1007/S11664-012-2065-Y |
0.324 |
|
| 2012 |
Huang W, Kovacevic R. Development of a real-time laser-based machine vision system to monitor and control welding processes International Journal of Advanced Manufacturing Technology. 63: 235-248. DOI: 10.1007/S00170-012-3902-0 |
0.444 |
|
| 2011 |
Huang W, Kovacevic R. A laser-based vision system for weld quality inspection. Sensors (Basel, Switzerland). 11: 506-21. PMID 22344308 DOI: 10.3390/S110100506 |
0.442 |
|
| 2011 |
Sarrafi R, Asgharifar M, Kovacevic R. Surface texturing of metals by cathode spots of atmospheric arc Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 323-329. DOI: 10.1115/MSEC2011-50295 |
0.807 |
|
| 2011 |
Asgharifar M, Kong F, Carlson B, Kovacevic R. Studying effects of arc discharge surface texturing on stress distribution in adhesively bonded joints by using finite element modeling Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 1-7. DOI: 10.1115/MSEC2011-50119 |
0.804 |
|
| 2011 |
Koike M, Martinez K, Guo L, Chahine G, Kovacevic R, Okabe T. Evaluation of titanium alloy fabricated using electron beam melting system for dental applications Journal of Materials Processing Technology. 211: 1400-1408. DOI: 10.1016/J.Jmatprotec.2011.03.013 |
0.646 |
|
| 2011 |
Santhanakrishnan S, Kong F, Kovacevic R. An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding Journal of Materials Processing Technology. 211: 1247-1259. DOI: 10.1016/J.Jmatprotec.2011.02.006 |
0.796 |
|
| 2011 |
Kong F, Ma J, Kovacevic R. Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process Journal of Materials Processing Technology. 211: 1102-1111. DOI: 10.1016/J.Jmatprotec.2011.01.012 |
0.603 |
|
| 2011 |
Foroozmehr E, Kovacevic R. Modeling of the effect of path planning on thermokinetic evolutions in laser powder deposition process Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1907-1918. DOI: 10.1007/S11661-010-0561-3 |
0.754 |
|
| 2011 |
Huang W, Kovacevic R. A neural network and multiple regression method for the characterization of the depth of weld penetration in laser welding based on acoustic signatures Journal of Intelligent Manufacturing. 22: 131-143. DOI: 10.1007/S10845-009-0267-9 |
0.437 |
|
| 2011 |
Balu P, Carlson B, Kovacevic R. An Investigation into the Laser Micro-Welding of Aluminum and Copper in Lap Joint Configuration Supplemental Proceedings: General Paper Selections. 3: 295-307. DOI: 10.1002/9781118062173.ch37 |
0.738 |
|
| 2011 |
Leggett P, Balu P, Hamid S, Kovacevic R. Optimization of Fiber Laser Produced Hastelloy C-276 Single Track Clad Supplemental Proceedings: General Paper Selections. 3: 227-236. DOI: 10.1002/9781118062173.ch29 |
0.749 |
|
| 2011 |
Santhanakrishnan S, Kovacevic R. A Heat Management Model for Hardness Uniformity of Multi-Pass Laser Heat Treatment Using Direct Diode Laser Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. 2: 469-476. DOI: 10.1002/9781118062142.ch57 |
0.748 |
|
| 2011 |
Asgharifar M, Sarrafi R, Kovacevic R. Surface treatment of aluminum alloys by atmospheric plasma arc discharge Tms Annual Meeting. 2: 903-910. |
0.801 |
|
| 2011 |
Davis WP, Hendow ST, Kovacevic R. Sinusoidal surface texturing using a nanosecond pulsed MOPA fiber laser 30th International Congress On Applications of Lasers and Electro-Optics, Icaleo 2011. 1131-1136. |
0.325 |
|
| 2010 |
Dimitrovska A, Kovacevic R. Environmental influence on Sn whisker growth Ieee Transactions On Electronics Packaging Manufacturing. 33: 193-197. DOI: 10.1109/Tepm.2010.2048034 |
0.684 |
|
| 2010 |
Kong F, Kovacevic R. 3D finite element modeling of the thermally induced residual stress in the hybrid laser/arc welding of lap joint Journal of Materials Processing Technology. 210: 941-950. DOI: 10.1016/J.Jmatprotec.2010.02.006 |
0.626 |
|
| 2010 |
Kong F, Kovacevic R. Modeling of heat transfer and fluid flow in the laser multilayered cladding process Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 41: 1310-1320. DOI: 10.1007/S11663-010-9412-2 |
0.63 |
|
| 2010 |
Foroozmehr E, Kovacevic R. Effect of path planning on the laser powder deposition process: Thermal and structural evaluation International Journal of Advanced Manufacturing Technology. 51: 659-669. DOI: 10.1007/S00170-010-2659-6 |
0.741 |
|
| 2010 |
Sarrafi R, Kovacevic R. Readers comment on GTAW cathodic spots paper Welding Journal (Miami, Fla). 89: 24. |
0.717 |
|
| 2010 |
Gadag S, Kovacevic R. Multi-wavelength micromachining of silicon and glass by Q-switched short pulsed lasers 29th International Congress On Applications of Lasers and Electro-Optics, Icaleo 2010 - Congress Proceedings. 103: 976-983. |
0.778 |
|
| 2010 |
Kovacevic R, Kong F. Overview of R&D work on laser materials processing at SMU Materials Science and Technology Conference and Exhibition 2010, Ms and T'10. 4: 2752-2763. |
0.329 |
|
| 2010 |
Sarrafi R, Kovacevic R. Cathodic cleaning of oxides from aluminum surface by variable-polarity arc Welding Journal (Miami, Fla). 89. |
0.775 |
|
| 2010 |
Sarrafi R, Balu P, Kovacevic R. Feasibility study of micro welding of aluminum and copper foils using new generation of lasers Materials Science and Technology Conference and Exhibition 2010, Ms and T'10. 4: 2711-2722. |
0.811 |
|
| 2010 |
Santhanakrishnan S, Kong F, Kovacevic R. Process parameters analysis of high power direct diode laser cladding 29th International Congress On Applications of Lasers and Electro-Optics, Icaleo 2010 - Congress Proceedings. 103: 398-407. |
0.76 |
|
| 2010 |
Chahine G, Smith P, Kovacevic R. Application of topology optimization in modern additive manufacturing 21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Sff 2010. 606-618. |
0.463 |
|
| 2010 |
Santhanakrishnan S, Kong F, Kovacevic R. A thermo-kinetic phase transformation model for multi-pass laser heat treatment by using high power direct diode laser 29th International Congress On Applications of Lasers and Electro-Optics, Icaleo 2010 - Congress Proceedings. 103: 573-582. |
0.748 |
|
| 2010 |
Kovacevic R, Soundararajan V, Atharifar H. 10 Years of R&D work on friction stir welding at SMU Materials Science and Technology Conference and Exhibition 2010, Ms and T'10. 4: 2677-2688. |
0.775 |
|
| 2009 |
Yang S, Kovacevic R. Laser welding of galvanized DP980 steel assisted by the GTAW preheating in a gap-free lap joint configuration Journal of Laser Applications. 21: 139-148. DOI: 10.2351/1.3184432 |
0.649 |
|
| 2009 |
Huang W, Kovacevic R. Feasibility study of using acoustic signals for online monitoring of the depth of weld in the laser welding of high-strength steels Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 223: 343-361. DOI: 10.1243/09544054JEM1320 |
0.306 |
|
| 2009 |
Santhanakrishnan S, Kong FR, Kovacevic R. A three-dimensional transient modeling and experimental analysis of laser transformation hardening by using high power direct diode laser Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 347-356. DOI: 10.1115/MSEC2009-84152 |
0.754 |
|
| 2009 |
Huang W, Kovacevic R. Noise reduction during acoustic monitoring of laser welding of high-strength steels Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 763-770. DOI: 10.1115/MSEC2009-84080 |
0.321 |
|
| 2009 |
Foroozmehr E, Kovacevic R. Modeling of the effect of path planning on deposition of metal-ceramic composite with laser powder deposition process Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 301-309. DOI: 10.1115/MSEC2009-84054 |
0.741 |
|
| 2009 |
Kong F, Kovacevic R. Numerical and experimental study on the thermally induced residual stresses behavior in the hybrid laser/arc welding of lap joint Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 2: 1-10. DOI: 10.1115/MSEC2009-84011 |
0.382 |
|
| 2009 |
Kong F, Kovacevic R. Modeling of transport phenomena in the laser multilayered cladding Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 737-745. DOI: 10.1115/MSEC2009-84010 |
0.568 |
|
| 2009 |
Kong F, Santhanakrishnan S, Lin D, Kovacevic R. Modeling of temperature field and grain growth of a dual phase steel DP980 in direct diode laser heat treatment Journal of Materials Processing Technology. 209: 5996-6003. DOI: 10.1016/J.Jmatprotec.2009.07.020 |
0.816 |
|
| 2009 |
Foroozmehr E, Lin D, Kovacevic R. Technical paper; Application of vibration in the Laser powder deposition process Journal of Manufacturing Processes. 11: 38-44. DOI: 10.1016/J.Jmapro.2009.07.002 |
0.802 |
|
| 2009 |
Atharifar H, Lin D, Kovacevic R. Numerical and experimental investigations on the loads carried by the tool during friction stir welding Journal of Materials Engineering and Performance. 18: 339-350. DOI: 10.1007/S11665-008-9298-1 |
0.815 |
|
| 2009 |
Dimitrovska A, Kovacevic R. Mitigation of Sn whisker growth by composite Ni/Sn plating Journal of Electronic Materials. 38: 2516-2524. DOI: 10.1007/S11664-009-0930-0 |
0.697 |
|
| 2009 |
Dimitrovska A, Kovacevic R. The effect of micro-alloying of Sn plating on mitigation of Sn whisker growth Journal of Electronic Materials. 38: 2726-2734. DOI: 10.1007/S11664-009-0915-Z |
0.719 |
|
| 2009 |
Foroozmehr E, Kovacevic R. Thermokinetic modeling of phase transformation in the laser powder deposition process Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 1935-1943. DOI: 10.1007/S11661-009-9870-9 |
0.779 |
|
| 2009 |
Foroozmehr E, Kovacevic R. Effect of path planning on residual stress distribution in laser powder deposition process Icaleo 2009 - 28th International Congress On Applications of Lasers and Electro-Optics, Congress Proceedings. 102: 830-839. |
0.725 |
|
| 2009 |
Yang SL, Kovacevic R. Welding of galvanized dual-phase 980 steel in a gap-free lap joint configuration Welding Journal (Miami, Fla). 88. |
0.406 |
|
| 2008 |
Atharifar H, Kovacevic R. Numerical study of the tool rake angle effect on the material flow in friction stir welding process Asme International Mechanical Engineering Congress and Exposition, Proceedings. 3: 649-657. DOI: 10.1115/IMECE2007-41962 |
0.813 |
|
| 2008 |
Yarrapareddy E, Kovacevic R. Synthesis and characterization of laser-based direct metal deposited nano-particles reinforced surface coatings for industrial slurry erosion applications Surface and Coatings Technology. 202: 1951-1965. DOI: 10.1016/J.Surfcoat.2007.08.032 |
0.815 |
|
| 2008 |
Chahine G, Koike M, Okabe T, Smith P, Kovacevic R. The design and production of Ti-6Al-4V ELI customized dental implants Jom. 60: 50-55. DOI: 10.1007/S11837-008-0148-2 |
0.54 |
|
| 2008 |
Foroozmehr E, Hamid S, Kovacevic R. Mitigation of porosity in laser powder deposition under vibratory condition Icaleo 2008 - 27th International Congress On Applications of Lasers and Electro-Optics, Congress Proceedings. 39-48. |
0.724 |
|
| 2007 |
Fan HG, Kovacevic R. The front line of modeling heat and mass transfer in arc welding processes Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 76: 6-13. DOI: 10.2207/Jjws.76.82 |
0.412 |
|
| 2007 |
Jiang WH, Kovacevic R. Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance Journal of Materials Processing Technology. 186: 331-338. DOI: 10.1016/J.Jmatprotec.2006.12.053 |
0.43 |
|
| 2007 |
Dwivedi R, Zekovic S, Kovacevic R. A novel approach to fabricate uni-directional and branching slender structures using laser-based direct metal deposition International Journal of Machine Tools and Manufacture. 47: 1246-1256. DOI: 10.1016/J.Ijmachtools.2006.08.012 |
0.578 |
|
| 2007 |
Zekovic S, Dwivedi R, Kovacevic R. Numerical simulation and experimental investigation of gas-powder flow from radially symmetrical nozzles in laser-based direct metal deposition International Journal of Machine Tools and Manufacture. 47: 112-123. DOI: 10.1016/J.Ijmachtools.2006.02.004 |
0.595 |
|
| 2007 |
Yarrapareddy E, Kovacevic R. Numerical simulation and characterization of slurry erosion of laser cladded surfaces by using failure analysis approach Journal of Failure Analysis and Prevention. 7: 464-474. DOI: 10.1007/S11668-007-9083-8 |
0.822 |
|
| 2007 |
Soundararajan V, Yarrapareddy E, Kovacevic R. Investigation of the friction stir lap welding of aluminum alloys AA 5182 and AA 6022 Journal of Materials Engineering and Performance. 16: 484-491. DOI: 10.1007/S11665-007-9081-8 |
0.816 |
|
| 2007 |
Atharifar H, Lin DC, Kovacevic R. Studying tunnel-like defect in friction stir welding process using computational fluid dynamics Materials Science and Technology Conference and Exhibition, Ms and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems". 3: 1650-1656. |
0.811 |
|
| 2006 |
SOUNDARARAJAN V, VALANT M, KOVACEVIC R. An overview of R&D work in friction stir welding at SMU Metalurgija-Journal of Metallurgy. 12: 275-295. DOI: 10.30544/381 |
0.714 |
|
| 2006 |
Soundararajan V, Atharifar H, Kovacevic R. Monitorinf and processing the acoustic emission signals from the friction-stir-welding process Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1673-1685. DOI: 10.1243/09544054JEM586 |
0.787 |
|
| 2006 |
Yarrapareddy E, Zekovic S, Hamid S, Kovacevic R. The development of nickel-tungsten carbide functionally graded materials by a laser-based direct metal deposition process for industrial slurry erosion applications Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1923-1936. DOI: 10.1243/09544054JEM578 |
0.829 |
|
| 2006 |
Dwivedi R, Zekovic S, Kovacevic R. Field feature detection and morphing-based process planning for fabrication of geometries and composition control for functionally graded materials Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1647-1661. DOI: 10.1243/09544054JEM490 |
0.491 |
|
| 2006 |
Fan H, Kovacevic R. Three-dimensional model for gas tungsten arc welding with filler metal Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1107-1115. DOI: 10.1243/09544054JEM406 |
0.304 |
|
| 2006 |
Chen CM, Kovacevic R. Parametric finite element analysis of stress evolution during friction stir welding Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1359-1371. DOI: 10.1243/09544054JEM324 |
0.316 |
|
| 2006 |
Lin DC, Srivatsan TS, Wang GX, Kovacevic R. Microstructural development in a rapidly cooled eutectic Sn-3.5% Ag solder reinforced with copper powder Powder Technology. 166: 38-46. DOI: 10.1016/J.Powtec.2006.02.009 |
0.322 |
|
| 2006 |
Ouyang J, Yarrapareddy E, Kovacevic R. Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper Journal of Materials Processing Technology. 172: 110-122. DOI: 10.1016/J.Jmatprotec.2005.09.013 |
0.807 |
|
| 2006 |
Dwivedi R, Kovacevic R. An expert system for generation of machine inputs for laser-based multi-directional metal deposition International Journal of Machine Tools and Manufacture. 46: 1811-1822. DOI: 10.1016/J.Ijmachtools.2005.11.008 |
0.566 |
|
| 2006 |
Zekovic S, Dwivedi R, Kovacevic R. An investigation of gas-powder flow in laser-based direct metal deposition 17th Solid Freeform Fabrication Symposium, Sff 2006. 558-572. |
0.574 |
|
| 2006 |
Dwivedi R, Zekovic S, Kovacevic R. Modeling and verification of error propagation in integrated additive/subtractive multi-directional direct manufacturing 17th Solid Freeform Fabrication Symposium, Sff 2006. 517-531. |
0.469 |
|
| 2005 |
Dwivedi R, Kovacevic R. Process planning for multi-directional laser-based direct metal deposition Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 219: 695-707. DOI: 10.1243/095440605X31535 |
0.543 |
|
| 2005 |
Yao YL, Cheng GJ, Rajurkar KP, Kovacevic R, Feiner S, Zhang W. Combined research and curriculum development of nontraditional manufacturing European Journal of Engineering Education. 30: 363-376. DOI: 10.1080/03043790500114581 |
0.321 |
|
| 2005 |
Soundararajan V, Zekovic S, Kovacevic R. Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061 International Journal of Machine Tools and Manufacture. 45: 1577-1587. DOI: 10.1016/J.Ijmachtools.2005.02.008 |
0.671 |
|
| 2005 |
Dwivedi R, Zekovic S, Kovacevic R. A model for error propagation in the surface profile for solid freeform fabrication 16th Solid Freeform Fabrication Symposium, Sff 2005. 395-405. |
0.553 |
|
| 2005 |
Dwivedi R, Zekovic S, Kovacevic R. Mechanism for determination of G-factors for solid freeform fabrication techniques based on large heat input 16th Solid Freeform Fabrication Symposium, Sff 2005. 370-381. |
0.497 |
|
| 2005 |
Zekovic S, Dwivedi R, Kovacevic R. Thermo-structural finite element analysis of direct laser metal deposited thin-walled structures 16th Solid Freeform Fabrication Symposium, Sff 2005. 338-355. |
0.534 |
|
| 2005 |
Valant M, Yarrapareddy E, Kovacevic R. A novel tool design for friction stir spot welding Asm Proceedings of the International Conference: Trends in Welding Research. 2005: 201-206. |
0.821 |
|
| 2004 |
Jandric Z, Kovacevic R. Heat management in solid free-form fabrication based on deposition by welding Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218: 1525-1540. DOI: 10.1243/0954405042418545 |
0.337 |
|
| 2004 |
Jiang WH, Kovacevic R. Slurry erosion resistance of laser clad Fe-Cr-B-Si coatings Surface Engineering. 20: 464-468. DOI: 10.1179/174329404X7135 |
0.349 |
|
| 2004 |
Fan HG, Kovacevic R. A unified model of transport phenomena in gas metal arc welding including electrode, arc plasma and molten pool Journal of Physics D: Applied Physics. 37: 2531-2544. DOI: 10.1088/0022-3727/37/18/009 |
0.383 |
|
| 2004 |
Dwivedi R, Kovacevic R. Automated torch path planning using polygon subdivision for solid freeform fabrication based on welding Journal of Manufacturing Systems. 23: 278-291. DOI: 10.1016/S0278-6125(04)80040-2 |
0.565 |
|
| 2004 |
Wang H, Jiang W, Ouyang J, Kovacevic R. Rapid prototyping of 4043 Al-alloy parts by VP-GTAW Journal of Materials Processing Technology. 148: 93-102. DOI: 10.1016/J.Jmatprotec.2004.01.058 |
0.396 |
|
| 2004 |
Chen CM, Kovacevic R. Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding International Journal of Machine Tools and Manufacture. 44: 1205-1214. DOI: 10.1016/J.Ijmachtools.2004.03.011 |
0.445 |
|
| 2004 |
Jandric Z, Labudovic M, Kovacevic R. Effect of heat sink on microstructure of three-dimensional parts built by welding-based deposition International Journal of Machine Tools and Manufacture. 44: 785-796. DOI: 10.1016/J.Ijmachtools.2004.01.009 |
0.42 |
|
| 2003 |
Li CF, Johnson DB, Kovacevic R. Modelling of heat transfer in waterjet guided laser drilling of silicon Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217: 583-600. DOI: 10.1243/095440503322011326 |
0.324 |
|
| 2003 |
Hu D, Kovacevic R. Modelling and measuring the thermal behaviour of the molten pool in closed-loop controlled laser-based additive manufacturing Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217: 441-452. DOI: 10.1243/095440503321628125 |
0.321 |
|
| 2003 |
Momber AW, Kovacevic R. Hydro-abrasive erosion of refractory ceramics Journal of Materials Science. 38: 2861-2874. DOI: 10.1023/A:1024436502947 |
0.34 |
|
| 2003 |
Labudovic M, Hu D, Kovacevic R. Journal of Materials Science. 38: 35-49. DOI: 10.1023/A:1021153513925 |
0.36 |
|
| 2003 |
Chen CM, Kovacevic R. Finite element modeling of friction stir welding - Thermal and thermomechanical analysis International Journal of Machine Tools and Manufacture. 43: 1319-1326. DOI: 10.1016/S0890-6955(03)00158-5 |
0.479 |
|
| 2003 |
Chen C, Kovacevic R, Jandgric D. Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum International Journal of Machine Tools and Manufacture. 43: 1383-1390. DOI: 10.1016/S0890-6955(03)00130-5 |
0.395 |
|
| 2003 |
Li C, Johnson D, Kovacevic R. Modeling of waterjet guided laser grooving of silicon International Journal of Machine Tools and Manufacture. 43: 925-936. DOI: 10.1016/S0890-6955(03)00063-4 |
0.421 |
|
| 2003 |
Song M, Kovacevic R. Thermal modeling of friction stir welding in a moving coordinate system and its validation International Journal of Machine Tools and Manufacture. 43: 605-615. DOI: 10.1016/S0890-6955(03)00022-1 |
0.375 |
|
| 2003 |
Hu D, Kovacevic R. Sensing, modeling and control for laser-based additive manufacturing International Journal of Machine Tools and Manufacture. 43: 51-60. DOI: 10.1016/S0890-6955(02)00163-3 |
0.402 |
|
| 2003 |
Chen CM, Kovacevic R. Prediction of Evolutional Stress in Friction Stir Welding Materials Science and Technology 2003 Meeting. 357-368. |
0.36 |
|
| 2003 |
Dwivedi R, Jandric Z, Kovacevic R. Torch path planning for solid freeform fabrication based on welding Transactions of the North American Manufacturing Research Institution of Sme. 31: 419-426. |
0.508 |
|
| 2002 |
Hu D, Mei H, Kovacevic R. Improving solid freeform fabrication by laser-based additive manufacturing Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 216: 1253-1264. DOI: 10.1243/095440502760291808 |
0.317 |
|
| 2002 |
Ouyang JH, Wang H, Kovacevic R. Rapid prototyping of 5356-aluminum alloy based on variable polarity gas tungsten arc welding: Process control and microstructure Materials and Manufacturing Processes. 17: 103-124. DOI: 10.1081/Amp-120002801 |
0.419 |
|
| 2002 |
Hu Z, Kovacevic R, Labudovic M. Experimental and numerical modeling of buckling instability of laser sheet forming International Journal of Machine Tools and Manufacture. 42: 1427-1439. DOI: 10.1016/S0890-6955(02)00075-5 |
0.448 |
|
| 2002 |
Ouyang JH, Kovacevic R. Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys Journal of Materials Engineering and Performance. 11: 51-63. DOI: 10.1007/S11665-002-0008-0 |
0.411 |
|
| 2002 |
Hu D, Kovacevic R. Finite element modeling of thermal behavior of molten pool in closed-loop controlled laser-based additive manufacturing Icaleo 2002 - 21st International Congress On Applications of Laser and Electro-Optics, Congress Proceedings. |
0.327 |
|
| 2002 |
Ouyang JH, Mei H, Kovacevic R. Rapid prototyping and characterization of a WC-(NiSiB alloy) ceramet/tool steel functionally graded material (FGM) synthesized by laser cladding Proceedings of the Tms Fall Meeting. 77-93. |
0.376 |
|
| 2002 |
Jandric Z, Wang YZ, Kovacevic R. Optimization of Welding Parameters for GTAW Based Rapid Manufacturing Asm Proceedings of the International Conference: Trends in Welding Research. 392-397. |
0.312 |
|
| 2001 |
Zheng B, Kovacevic R. A novel control approach for the droplet detachment in rapid prototyping by 3D welding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 348-355. DOI: 10.1115/1.1345730 |
0.346 |
|
| 2001 |
Hu Z, Labudovic M, Wang H, Kovacevic R. Computer simulation and experimental investigation of sheet metal bending using laser beam scanning International Journal of Machine Tools and Manufacture. 41: 589-607. DOI: 10.1016/S0890-6955(00)00058-4 |
0.439 |
|
| 2001 |
Wang H, Kovacevic R. Rapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215: 1519-1527. |
0.328 |
|
| 2001 |
Labudovic M, Kovacevic R. Modelling of the laser surface nitriding of Ti-6A1-4V alloy-analysis of heat transfer and residual stresses Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 215: 315-340. |
0.352 |
|
| 2001 |
Hu D, Labudovic M, Kovacevic R. On-line sensing and estimation of laser surface modification by computer vision Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215: 1081-1090. |
0.309 |
|
| 2001 |
Kmecko IS, Jandric Z, Kovacevic R. Influence of geometrical factor on heat conduction rate during GTAW for welding-based deposition American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 12: 343-351. |
0.342 |
|
| 2000 |
Momber AW, Kovacevic R. Particle-size distribution influence in high-speed erosion of aluminium Particulate Science and Technology. 18: 199-212. DOI: 10.1080/02726350008906836 |
0.312 |
|
| 2000 |
Hu D, Kovacevic R, Valant M. Solid freeform fabrication of metal parts by 3D laser cladding American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 11: 365-371. |
0.32 |
|
| 1999 |
Zheng B, Wang HJ, Wang QL, Kovacevic R. Imaging the Keyhole in PAW of Aluminum Alloys Journal of Manufacturing Science and Engineering. 121: 372-377. DOI: 10.1115/1.2832691 |
0.386 |
|
| 1999 |
Fan HG, Kovacevic R. Keyhole formation and collapse in plasma arc welding Journal of Physics D: Applied Physics. 32: 2902-2909. DOI: 10.1088/0022-3727/32/22/312 |
0.314 |
|
| 1999 |
Momber AW, Mohan RS, Kovacevic R. On-line analysis of hydro-abrasive erosion of pre-cracked materials by acoustic emission Theoretical and Applied Fracture Mechanics. 31: 1-17. DOI: 10.1016/S0167-8442(98)00062-7 |
0.321 |
|
| 1999 |
Fan HG, Kovacevic R. Droplet formation, detachment, and impingement on the molten pool in gas metal arc welding Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 30: 791-801. DOI: 10.1007/S11663-999-0041-6 |
0.407 |
|
| 1999 |
Labudovic M, Kovacevic R, Kmecko I, Khan TI, Blecic D, Blecic Z. Mechanism of surface modification of the Ti-6Al-4V alloy using a gas tungsten arc heat source Metallurgical and Materials Transactions A. 30: 1597-1603. DOI: 10.1007/S11661-999-0096-7 |
0.414 |
|
| 1999 |
Beardsley HE, Kovacevic R. New rapid prototyping technique based on 3-D welding Technical Paper - Society of Manufacturing Engineers. Pe. |
0.314 |
|
| 1998 |
Zhang SB, Zhang YM, Kovacevic R. Noncontact Ultrasonic Sensing for Seam Tracking in Arc Welding Processes Journal of Manufacturing Science and Engineering. 120: 600-608. DOI: 10.1115/1.2830164 |
0.364 |
|
| 1998 |
Cao ZN, Zhang YM, Kovacevic R. Numerical Dynamic Analysis of Moving GTA Weld Pool Journal of Manufacturing Science and Engineering. 120: 173-178. DOI: 10.1115/1.2830096 |
0.454 |
|
| 1998 |
Wang Y, Kovacevic R, Liu J. Mechanism of surface modification of CeO2 in laser remelted alloy spray coatings Wear. 221: 47-53. DOI: 10.1016/S0043-1648(98)00262-2 |
0.433 |
|
| 1998 |
Beardsley H, Kovacevic R. Controlling Heat Input and Metal Transfer for 3D Welding-Based Rapid Prototyping Asm Proceedings of the International Conference: Trends in Welding Research. 1062-1067. |
0.301 |
|
| 1997 |
Kovacevic R, Hashish M, Mohan R, Ramulu M, Kim TJ, Geskin ES. State of the Art of Research and Development in Abrasive Waterjet Machining Journal of Manufacturing Science and Engineering. 119: 776-785. DOI: 10.1115/1.2836824 |
0.344 |
|
| 1997 |
Zhang YM, Li L, Kovacevic R. Dynamic estimation of full penetration using geometry of adjacent weld pools Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 631-643. DOI: 10.1115/1.2831197 |
0.404 |
|
| 1997 |
Kovacevic R, Zhang YM. Real-time image processing for monitoring of free weld pool surface Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 161-169. DOI: 10.1115/1.2831091 |
0.46 |
|
| 1997 |
Zhang YM, Kovacevic R. Real-time sensing of sag geometry during GTA welding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 151-159. DOI: 10.1115/1.2831090 |
0.385 |
|
| 1997 |
Yong Z, Kovacevic R. Feedback control of chaotic circular point sets with arbitrary velocity profile Chaos, Solitons and Fractals. 8: 313-326. DOI: 10.1016/S0960-0779(96)00131-2 |
0.304 |
|
| 1997 |
Momber AW, Kovacevic R, Kwak H. Alternative method for the evaluation of the abrasive water-jet cutting of grey cast iron Journal of Materials Processing Technology. 65: 65-72. DOI: 10.1016/0924-0136(95)02243-0 |
0.307 |
|
| 1996 |
Momber AW, Kwak H, Kovacevic R. Investigations in abrasive water jet erosion based on wear particle analysis Journal of Tribology. 118: 759-766. DOI: 10.1115/1.2831605 |
0.315 |
|
| 1996 |
Kovacevic R, Mohan R, Beardsley HE. Monitoring of thermal energy distribution in abrasive waterjet cutting using infrared thermography Journal of Manufacturing Science and Engineering, Transactions of the Asme. 118: 555-563. DOI: 10.1115/1.2831067 |
0.322 |
|
| 1996 |
Kovacevic R, Cao ZN, Zhang YM. Role of Welding Parameters in Determining the Geometrical Appearance of Weld Pool Journal of Engineering Materials and Technology. 118: 589-596. DOI: 10.1115/1.2805961 |
0.342 |
|
| 1996 |
Zhang YM, Kovacevic R, Wu L. Dynamic analysis and identification of gas tungsten arc welding process for weld penetration control Journal of Engineering For Industry - Transactions of the Asme. 118: 123-136. DOI: 10.1115/1.2803633 |
0.395 |
|
| 1996 |
Momber AW, Kovacevic R. Accelerated high speed water erosion test for concrete wear debris analysis Tribology Transactions. 39: 943-949. DOI: 10.1080/10402009608983616 |
0.322 |
|
| 1996 |
Zhang YM, Kovacevic R, Li L. Characterization and real-time measurement of geometrical appearance of the weld pool International Journal of Machine Tools and Manufacture. 36: 799-816. DOI: 10.1016/0890-6955(95)00083-6 |
0.411 |
|
| 1996 |
Momber AW, Eusch I, Kovacevic R. Machining refractory ceramics with abrasive water jets Journal of Materials Science. 31: 6485-6493. DOI: 10.1007/Bf00356252 |
0.377 |
|
| 1996 |
Kovacevic R, Zhang YM. Sensing free surface of arc weld pool using specular reflection: Principle and analysis Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 210: 553-564. |
0.328 |
|
| 1996 |
Kovacevic R, Zhang YM, Li L. Monitoring of weld joint penetration based on weld pool geometrical appearance: The geometrical appearance of the weld pool contains sufficient information to determine full joint penetration in GTAW Welding Journal (Miami, Fla). 75: 317-s. |
0.313 |
|
| 1996 |
Zhang YM, Cao ZN, Kovacevic R. Numerical analysis of fully penetrated weld pools in gas tungsten arc welding Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 210: 187-195. |
0.342 |
|
| 1995 |
Kovacevic R, Mohan R, Zhang YM. Cutting force dynamics as a tool for surface profile monitoring in AWJ Journal of Engineering For Industry. 117: 340-350. DOI: 10.1115/1.2804339 |
0.332 |
|
| 1995 |
Kovacevic R, Cherukuthota C, Mohan R. Improving milling performance with high pressure waterjet assisted cooling / lubrication Journal of Engineering For Industry. 117: 331-339. DOI: 10.1115/1.2804338 |
0.346 |
|
| 1995 |
Kovacevic R, Zhang YM, Ruan S. Sensing and control of weld pool geometry for automated GTA welding Journal of Engineering For Industry. 117: 210-222. DOI: 10.1115/1.2803297 |
0.417 |
|
| 1995 |
Kovacevic R, Cherukuthota C, Mazurkiewicz M. High pressure waterjet cooling/lubrication to improve machining efficiency in milling International Journal of Machine Tools and Manufacture. 35: 1459-1473. DOI: 10.1016/0890-6955(95)00128-K |
0.305 |
|
| 1994 |
Beardsley H, Zhang Y, Kovacevic R. Infrared sensing of full penetration state in gas tungsten arc welding International Journal of Machine Tools and Manufacture. 34: 1079-1090. DOI: 10.1016/0890-6955(94)90014-0 |
0.405 |
|
| 1992 |
Mohan R, Kovacevic R, Zhang YM. Characterization of surface texture generated by high energy jets American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 62: 203-218. |
0.304 |
|
| 1991 |
Kovacevic R. Surface texture in abrasive waterjet cutting Journal of Manufacturing Systems. 10: 32-40. DOI: 10.1016/0278-6125(91)90045-4 |
0.35 |
|
| Show low-probability matches. |
