Kornel Ehmann - Publications

Affiliations: 
Mechanical Engineering Northwestern University, Evanston, IL 
Area:
Mechanical Engineering

173 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Pritchet D, Ehmann K, Cao J, Huang J. Manipulation and Localized Deposition of Particle Groups with Modulated Electric Fields. Micromachines. 11. PMID 32102176 DOI: 10.3390/Mi11020226  0.52
2019 Wolff SJ, Wu H, Parab N, Zhao C, Ehmann KF, Sun T, Cao J. In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing. Scientific Reports. 9: 962. PMID 30700736 DOI: 10.1038/s41598-018-36678-5  0.52
2018 Pritchet D, Moser N, Ehmann K, Cao J, Huang J. Quantifying Discretization Errors in Electrophoretically-Guided Micro Additive Manufacturing. Micromachines. 9. PMID 30424380 DOI: 10.3390/Mi9090447  0.52
2018 Giovannini M, Cao J, Ehmann K. Design and models of helical needle geometries for core biopsies. Journal of the Mechanical Behavior of Biomedical Materials. 90: 113-124. PMID 30366301 DOI: 10.1016/j.jmbbm.2018.09.036  0.52
2018 Giovannini M, Ren H, Cao J, Ehmann K. Study on design and cutting parameters of rotating needles for core biopsy. Journal of the Mechanical Behavior of Biomedical Materials. 86: 43-54. PMID 29933201 DOI: 10.1016/j.jmbbm.2018.06.013  0.52
2017 Che D, Zhang W, Ehmann K. Chip formation and force responses in linear rock cutting: An experimental study Journal of Manufacturing Science and Engineering, Transactions of the Asme. 139. DOI: 10.1115/1.4033905  0.64
2016 Zhang C, Guo P, Ehmann KF, Li Y. Effects of ultrasonic vibrations in micro-groove turning. Ultrasonics. 67: 30-40. PMID 26773790 DOI: 10.1016/j.ultras.2015.12.016  1
2016 Zhu WL, He Y, Ehmann KF, Sánchez Egea AJ, Wang X, Ju BF, Zhu Z. Theoretical and Experimental Investigation on Inclined Ultrasonic Elliptical Vibration Cutting of Alumina Ceramics Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033605  0.32
2016 Moser N, Pritchet D, Ren H, Ehmann KF, Cao J. An efficient and general finite element model for double-sided incremental forming Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033483  0.52
2016 Xing Y, Deng J, Wang X, Ehmann K, Cao J. Experimental assessment of laser textured cutting tools in dry cutting of aluminum alloys Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4032263  1
2016 Zeng Q, Ehmann KF, Cao J. Tri-pyramid Robot: Stiffness modeling of a 3-DOF translational parallel manipulator Robotica. 34: 383-402. DOI: 10.1017/S0263574714001520  1
2016 Zeng Q, Ehmann KF, Cao J. Design of general kinematotropic mechanisms Robotics and Computer-Integrated Manufacturing. 38: 67-81. DOI: 10.1016/j.rcim.2015.10.005  1
2016 Milutinovic DS, Sato R, Matsuura D, Ehmann K. Mechanism for active Π-joint as an equivalent to the combination of revolute joint and proximal fixed-length link Robotics and Computer-Integrated Manufacturing. 37: 179-187. DOI: 10.1016/j.rcim.2015.05.005  1
2016 Wang X, Han P, Kang M, Ehmann K. Surface-blended texturing of medical needles for friction reduction using a picosecond laser Applied Physics a: Materials Science and Processing. 122. DOI: 10.1007/s00339-016-9892-2  1
2016 Zhang C, Shi G, Ehmann KF, Li Y. Modeling and simulation of micro-groove topography on cylindrical surface by elliptical vibration-assisted turning International Journal of Advanced Manufacturing Technology. 1-18. DOI: 10.1007/s00170-015-8250-4  1
2015 Mladenović GM, Tanovic LM, Ehmann KF. Tool path generation for milling of free form surfaces with feedrate scheduling Fme Transactions. 43: 9-15. DOI: 10.5937/fmet1501009M  1
2015 Moser N, Ndip-Agbor E, Ren H, Zhang Z, Ehmann K, Cao J. Challenges and process strategies concerning multi-pass double sided incremental forming Key Engineering Materials. 651: 1122-1127. DOI: 10.4028/www.scientific.net/KEM.651-653.1122  1
2015 Zhang C, Ehmann KF, Li Y, Guo P. Ultrasonic elliptical vibration-assisted micro-groove turning Key Engineering Materials. 625: 603-606. DOI: 10.4028/www.scientific.net/KEM.625.603  1
2015 Malukhin K, Ehmann K. Model of a NiTi shape memory alloy actuator Journal of Intelligent Material Systems and Structures. 26: 386-399. DOI: 10.1177/1045389X14526955  1
2015 Mohanty S, Ehmann KF, Cao J. Numerical analysis of the effect of non uniform electric field on the trajectory of micro water jet Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 1. DOI: 10.1115/MSEC20159445  1
2015 Giovannini M, Moser N, Wang X, Ehmann K. Computational and experimental study of vibrational motions on tissue cutting for solid biopsy needles Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 2. DOI: 10.1115/MSEC20159266  1
2015 Che D, Smith J, Ehmann KF. Finite element study of the cutting mechanics of the three dimensional rock turning process Asme 2015 International Manufacturing Science and Engineering Conference, Msec 2015. 1. DOI: 10.1115/MSEC20159249  1
2015 Giovannini M, Moser N, Ehmann K. Experimental and analytical study of micro-serrations on surgical blades Asme 2015 International Technical Conference and Exhibition On Packaging and Integration of Electronic and Photonic Microsystems, Interpack 2015, Collocated With the Asme 2015 13th International Conference On Nanochannels, Microchannels, and Minichannels. 3. DOI: 10.1115/IPACK2015-48046  1
2015 Zhang Z, Ren H, Xu R, Moser N, Smith J, Ndip-Agbor E, Malhotra R, Xia ZC, Ehmann KF, Cao J. A mixed double-sided incremental forming toolpath strategy for improved geometric accuracy Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4031092  1
2015 Ren H, Moser N, Zhang Z, Ndip-Agbor E, Smith J, Ehmann KF, Cao J. Effects of tool positions in accumulated double-sided incremental forming on part geometry Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4030528  0.52
2015 Zhang C, Guo P, Ehmann KF, Li Y. Turning of microgrooves both with and without aid of ultrasonic elliptical vibration Materials and Manufacturing Processes. 30: 1001-1009. DOI: 10.1080/10426914.2015.1004692  1
2015 Wang X, Giovannini M, Xing Y, Kang M, Ehmann K. Fabrication and tribological behaviors of corner-cube-like dimple arrays produced by laser surface texturing on medical needles Tribology International. 92: 553-558. DOI: 10.1016/j.triboint.2015.07.042  1
2015 Zhu Z, To S, Xiao G, Ehmann KF, Zhang G. Rotary spatial vibration-assisted diamond cutting of brittle materials Precision Engineering. DOI: 10.1016/j.precisioneng.2015.12.007  1
2015 Saxena I, Ehmann K, Cao J. High throughput microfabrication using laser induced plasma in saline aqueous medium Journal of Materials Processing Technology. 217: 77-87. DOI: 10.1016/j.jmatprotec.2014.10.018  1
2015 Ng MK, Li L, Fan Z, Gao RX, Smith EF, Ehmann KF, Cao J. Joining sheet metals by electrically-assisted roll bonding Cirp Annals - Manufacturing Technology. 64: 273-276. DOI: 10.1016/J.Cirp.2015.04.131  1
2015 Zhu WL, Xing Y, Ehmann KF, Ju BF. Ultrasonic elliptical vibration texturing of the rake face of carbide cutting tools for adhesion reduction International Journal of Advanced Manufacturing Technology. 1-11. DOI: 10.1007/s00170-015-8084-0  1
2015 Zhang C, Ehmann K, Li Y. Analysis of cutting forces in the ultrasonic elliptical vibration-assisted micro-groove turning process International Journal of Advanced Manufacturing Technology. 78: 139-152. DOI: 10.1007/s00170-014-6628-3  1
2014 Saxena I, Ehmann K, Cao J. Laser-induced plasma in aqueous media: numerical simulation and experimental validation of spatial and temporal profiles. Applied Optics. 53: 8283-94. PMID 25608071 DOI: 10.1364/AO.53.008283  1
2014 Chen G, Liang Y, Ehmann KF, Sun Y, Bai Q. Fourier transform based dynamic error modeling method for ultra-precision machine tool Proceedings of Spie - the International Society For Optical Engineering. 9281. DOI: 10.1117/12.2068105  1
2014 Saxena I, Ehmann K. Multi-material capability of laser induced plasma micromachining Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 1. DOI: 10.1115/MSEC2014-4142  1
2014 Che D, Han P, Peng B, Ehmann KF. FInite element study on chip formation and force response in two-dimensional orthogonal cutting of rock Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-3952  1
2014 Guo P, Lu Y, Pei P, Ehmann KF. Fast generation of micro-channels on cylindrical surfaces by elliptical vibration texturing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4027126  1
2014 Che D, Saxena I, Han P, Guo P, Ehmann KF. Machining of carbon fiber reinforced plastics/polymers: A literature review Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4026526  1
2014 Pallav K, Han P, Ramkumar J, Nagahanumaiah, Ehmann KF. Comparative assessment of the laser induced plasma micromachining and the micro-EDM processes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4025391  1
2014 Zeng Q, Ehmann KF, Cao J. Tri-pyramid Robot: Design and kinematic analysis of a 3-DOF translational parallel manipulator Robotics and Computer-Integrated Manufacturing. 30: 648-657. DOI: 10.1016/j.rcim.2014.06.002  1
2014 Zeng Q, Ehmann KF. Design of parallel hybrid-loop manipulators with kinematotropic property and deployability Mechanism and Machine Theory. 71: 1-26. DOI: 10.1016/j.mechmachtheory.2013.08.017  1
2014 Che D, Ehmann K. Experimental study of force responses in polycrystalline diamond face turning of rock International Journal of Rock Mechanics and Mining Sciences. 72: 80-91. DOI: 10.1016/j.ijrmms.2014.08.014  1
2014 Guo P, Lu Y, Ehmann KF, Cao J. Generation of hierarchical micro-structures for anisotropic wetting by elliptical vibration cutting Cirp Annals - Manufacturing Technology. 63: 553-556. DOI: 10.1016/j.cirp.2014.03.048  1
2014 Yang Y, Yarka C, Cao J, Ehmann K. Feasibility of using Copper(II)Oxide for additive manufacturing International Journal of Precision Engineering and Manufacturing. 15: 1961-1965. DOI: 10.1007/s12541-014-0551-2  1
2014 Lu Y, Guo P, Pei P, Ehmann KF. Experimental studies of wettability control on cylindrical surfaces by elliptical vibration texturing International Journal of Advanced Manufacturing Technology. 76: 1807-1817. DOI: 10.1007/s00170-014-6384-4  1
2014 Peng Y, Jiang T, Ehmann KF. Research on single-point diamond fly-grooving of brittle materials International Journal of Advanced Manufacturing Technology. 75: 1577-1586. DOI: 10.1007/s00170-014-6245-1  1
2014 Zhang G, Ehmann KF. Dynamic design methodology of high speed micro-spindles for micro/meso-scale machine tools International Journal of Advanced Manufacturing Technology. 76: 229-246. DOI: 10.1007/s00170-014-5887-3  1
2013 Han P, Ehmann K. Study of the effect of cannula rotation on tissue cutting for needle biopsy. Medical Engineering & Physics. 35: 1584-90. PMID 23727155 DOI: 10.1016/j.medengphy.2013.05.001  1
2013 Han P, Kim J, Ehmann KF, Cao J. Laser surface texturing of medical needles for friction control International Journal of Mechatronics and Manufacturing Systems. 6: 215-228. DOI: 10.1504/IJMMS.2013.056449  1
2013 Velasquez T, Han P, Cao J, Ehmann KF. Feasibility of laser surface texturing for friction reduction in surgical blades Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/MSEC2013-1193  1
2013 Malhotra R, Saxena I, Ehmann K, Cao J. Line-based laser induced plasma micro-machining (L-LIPMM) Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 2. DOI: 10.1115/MSEC2013-1153  1
2013 Che D, Ehmann KF. Polycrystalline diamond turning of rock Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/MSEC2013-1127  1
2013 Zeng Q, Ehmann KF. Design of a 3-DOF compliant parallel mechanism for displacement amplification Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/MSEC2013-1095  1
2013 Zhao H, Ehmann KF. Stability analysis of chatter in tandem rolling mills-part 2: The regenerative effect Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024033  1
2013 Zhao H, Ehmann KF. Stability analysis of chatter in tandem rolling mills-part 1: Single- and multi-stand negative damping effect Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024032  1
2013 Li L, Li B, Li X, Ehmann KF. Experimental investigation of hard turning mechanisms by PCBN tooling embedded micro thin film thermocouples Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4023722  1
2013 Guo P, Ehmann KF. Development of a tertiary motion generator for elliptical vibration texturing Precision Engineering. 37: 364-371. DOI: 10.1016/j.precisioneng.2012.10.005  1
2013 Guo P, Ehmann KF. An analysis of the surface generation mechanics of the elliptical vibration texturing process International Journal of Machine Tools and Manufacture. 64: 85-95. DOI: 10.1016/j.ijmachtools.2012.08.003  1
2013 Malhotra R, Saxena I, Ehmann K, Cao J. Laser-induced plasma micro-machining (LIPMM) for enhanced productivity and flexibility in laser-based micro-machining processes Cirp Annals - Manufacturing Technology. 62: 211-214. DOI: 10.1016/j.cirp.2013.03.036  1
2013 Bertsche E, Ehmann K, Malukhin K. Ultrasonic slot machining of a silicon carbide matrix composite International Journal of Advanced Manufacturing Technology. 66: 1119-1134. DOI: 10.1007/s00170-012-4394-7  1
2013 Bertsche E, Ehmann K, Malukhin K. An analytical model of rotary ultrasonic milling International Journal of Advanced Manufacturing Technology. 65: 1705-1720. DOI: 10.1007/s00170-012-4292-z  1
2013 Ko JH, Ehmann KF. Investigation of the effect of tooling axial ultrasonic vibration assistance on meso-scale milled surfaces Proceedings of the 13th International Conference of the European Society For Precision Engineering and Nanotechnology, Euspen 2013. 2: 117-120.  1
2013 Chen G, Liang Y, Sun Y, Ehmann KF. Study on the direct relation between machine error and machined form accuracy Proceedings of the 13th International Conference of the European Society For Precision Engineering and Nanotechnology, Euspen 2013. 2: 176-180.  1
2012 Malukhin K, Ehmann K. A model of the kinetics of the temperature-induced phase transformation in NiTi alloys and its experimental verification Journal of Intelligent Material Systems and Structures. 23: 35-44. DOI: 10.1177/1045389X11430728  1
2012 Che D, Guo P, Ehmann KF. Design and analysis of helical needle tip grinding process Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 33-42. DOI: 10.1115/MSEC2012-7274  1
2012 Han P, Pallav K, Ehmann K. Force model for needle-tissue interaction Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 51-58. DOI: 10.1115/MSEC2012-7257  1
2012 Ehmann K, Malukhin K. A generalized analytical model of the cutting angles of a biopsy needle tip Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007712  1
2012 Zeng Q, Ehmann KF. Error modeling of a parallel wedge precision positioning stage Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007640  1
2012 Che D, Han P, Guo P, Ehmann K. Issues in polycrystalline diamond compact cutter-rock interaction from a metal machining point of view-part II: Bit performance and rock cutting mechanics Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007623  1
2012 Werschmoeller D, Li X, Ehmann K. Measurement of transient tool-internal temperature fields during hard turning by insert-embedded thin film sensors Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007621  1
2012 Che D, Han P, Guo P, Ehmann K. Issues in polycrystalline diamond compact cutter-rock interaction from a metal machining point of view-part I: Temperature, stresses, and forces Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007468  1
2012 Devor RE, Kapoor SG, Cao J, Ehmann KF. Transforming the landscape of manufacturing: Distributed manufacturing based on desktop manufacturing (DM) 2 Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4006095  1
2012 Malukhin K, Sung H, Ehmann K. A shape memory alloy based tool clamping device Journal of Materials Processing Technology. 212: 735-744. DOI: 10.1016/j.jmatprotec.2011.10.026  1
2012 Han P, Che D, Pallav K, Ehmann K. Models of the cutting edge geometry of medical needles with applications to needle design International Journal of Mechanical Sciences. 65: 157-167. DOI: 10.1016/j.ijmecsci.2012.09.014  1
2012 Khim G, Ro SK, Park JK, Ehmann K. A three-axis translation stage using opposing wedges with error compensation International Journal of Precision Engineering and Manufacturing. 13: 401-406. DOI: 10.1007/s12541-012-0051-1  1
2012 Zeng Q, Ehmann KF. A novel design of parallel compliant micro-motion stages with kinematotropic properties Transactions of the North American Manufacturing Research Institution of Sme. 40: 324-332.  1
2011 Werschmoeller D, Li X, Ehmann K. Measurement of transient tool internal temperature fields during hard turning by embedded thin film sensors Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 297-306. DOI: 10.1115/MSEC2011-50297  1
2011 Zhou R, Cao J, Ehmann K, Xu C. An investigation on deformation-based micro surface texturing Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 1: 613-619. DOI: 10.1115/MSEC2011-50273  1
2011 Kumar P, Han P, Ramkumar J, Nagahanumaiah, Ehmann KF. Comparative assessment of the laser induced plasma micro-machining (LIP-MM) and the micro-EDM processes Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 429-442. DOI: 10.1115/MSEC2011-50260  1
2011 Guo P, Ehmann KF. Development of a new vibrator for elliptical vibration texturing Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 1: 373-380. DOI: 10.1115/MSEC2011-50131  1
2011 Zhou R, Cao J, Ehmann K, Xu C. An investigation on deformation-based surface texturing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4005459  1
2011 Ehmann KF. Retired Associate Editors Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4005403  1
2011 Zeng Q, Fang Y, Ehmann KF. Design of a novel 4-DOF kinematotropic hybrid parallel manipulator Journal of Mechanical Design, Transactions of the Asme. 133. DOI: 10.1115/1.4005233  1
2011 Zeng Q, Fang Y, Ehmann KF. Topological structural synthesis of 4-DOF serial-parallel hybrid mechanisms Journal of Mechanical Design, Transactions of the Asme. 133. DOI: 10.1115/1.4004584  1
2011 Werschmoeller D, Ehmann K, Li X. Tool embedded thin film microsensors for monitoring thermal phenomena at tool-workpiece interface during machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4003616  1
2011 Moore JZ, Malukhin K, Shih AJ, Ehmann KF. Hollow needle tissue insertion force model Cirp Annals - Manufacturing Technology. 60: 157-160. DOI: 10.1016/j.cirp.2011.03.101  1
2011 Zhou R, Cao J, Xu C, Ehmann K. An investigation on multi-pass deformation-based surface texturing Special Edition: 10th International Conference On Technology of Plasticity, Ictp 2011. 171-176.  1
2011 Ko JH, Shaw KC, Ehmann KF. Dynamic modelling of the cusp error reduction phenomenon in high speed micro/meso-scale milling processes with ultrasonic vibration assistance Proceedings of the 11th International Conference of the European Society For Precision Engineering and Nanotechnology, Euspen 2011. 2: 192-195.  1
2010 Pallav K, Ehmann KF. Laser induced plasma micro-machining Asme 2010 International Manufacturing Science and Engineering Conference, Msec 2010. 2: 363-369. DOI: 10.1115/MSEC2010-34242  1
2010 Pallav K, Ehmann KF. Feasibility of laser induced plasma micro-machining (LIP-MM) Ifip Advances in Information and Communication Technology. 315: 73-80. DOI: 10.1007/978-3-642-11598-1_8  1
2009 Mahayotsanun N, Lee HC, Cheng TJ, Chuang Y, Tu KY, Ehmann K, Cao J. Development of the high-speed micro-extrusion machine to investigate size, strain rate,and tribological effects International Conferences On Multi-Material Micro Manufacture, 4m/International Conferences On Micro Manufacturing, Icomm. 383-386. DOI: 10.1243/17547164C0012009081  1
2009 Yoon HS, Ehmann KF. A slip-line field model for orthogonal micro-machining processes International Conferences On Multi-Material Micro Manufacture, 4m/International Conferences On Micro Manufacturing, Icomm. 329-332. DOI: 10.1243/17547164C0012009068  1
2009 Greco A, Raphaelson S, Ehmann K, Wang QJ, Lin C. Surface texturing of tribological interfaces using the vibromechanical texturing method Journal of Manufacturing Science and Engineering, Transactions of the Asme. 131: 0610051-0610058. DOI: 10.1115/1.4000418  1
2008 Lee HU, Cho DW, Ehmann KF. A mechanistic model of cutting forces in micro-end-milling with cutting-condition-independent cutting force coefficients Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311021-0311029. DOI: 10.1115/1.2917300  1
2008 Malukhin K, Ehmann KF. An experimental investigation of the feasibility of "self- sensing" shape memory alloy based actuators Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311091-03110910. DOI: 10.1115/1.2917294  1
2008 Ehmann KF, Devor RE, Kapoor SG, Cao J. Design and analysis of micro/meso-scale machine tools Smart Devices and Machines For Advanced Manufacturing. 283-318. DOI: 10.1007/978-1-84800-147-3_12  1
2008 Malukhin K, Ehmann K. Development of a monolithic shape memory alloy manipulator Ifip International Federation For Information Processing. 260: 243-250. DOI: 10.1007/978-0-387-77405-3_23  1
2007 Devor RE, Ehmann KF. Introduction Micromanufacturing: International Research and Development. 1-9. DOI: 10.1007/978-1-4020-5949-0_1  1
2007 Ehmann KF, Bourell D, Culpepper ML, Hodgson TJ, Kurfess TR, Madou M, Rajurkar K, DeVor R. Micromanufacturing: International research and development Micromanufacturing: International Research and Development. 1-362. DOI: 10.1007/978-1-4020-5949-0  1
2007 Malukhin K, Ehmann KF. Identification of direct metal deposition (DMD) process parameters for manufacturing thin wall structures from shape memory alloy (NiTi) powder Transactions of the North American Manufacturing Research Institution of Sme. 35: 481-488.  1
2007 Hong MS, Jung HS, Ehmann KF, Yoon HS. Modelling and simulation of the micro milling process Laser Metrology and Machine Performance Viii - 8th International Conference and Exhibition On Laser Metrology, Machine Tool, Cmm and Robotic Performance, Lamdamap 2007. 299-308.  1
2006 Hu PH, Zhao H, Ehmann KF. Third-octave-mode chatter in rolling. Part 3: Stability of a multi-stand mill Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1293-1303. DOI: 10.1243/09544054B07004  1
2006 Hu PH, Zhao H, Ehmann KF. Third-octave-mode chatter in rolling. Part 2: Stability of a single-stand mill Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1279-1292. DOI: 10.1243/09544054B06904  1
2006 Hu PA, Zhao H, Ehmann KF. Third-octave-mode chatter in rolling. Part 1: Chatter model Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 220: 1267-1277. DOI: 10.1243/09544054B06804  1
2006 Malukhin K, Ehmann K. Material characterization of NiTi based memory alloys fabricated by the laser direct metal deposition process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 691-696. DOI: 10.1115/1.2193553  1
2006 Ehmann KF. Journal of Manufacturing Science and Engineering, Transactions of the ASME: Editorial Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 1. DOI: 10.1115/1.2172427  1
2006 Malukhin K, Ehmann K. Manufacturing of shape memory alloy based monolithic functional structures with shape memory effect properties Transactions of the North American Manufacturing Research Institute of Sme. 34: 261-268.  1
2006 Lee HU, Cho DW, Ehmann KF, Ko TJ, Yun WS. Prediction of cutting forces in micro-end-milling using the cutting-condition-independent cutting force coefficients Transactions of the North American Manufacturing Research Institute of Sme. 34: 453-459.  1
2005 Gong Y, Lin C, Ehmann KF. Dynamics of initial penetration in drilling: Part 1 - Mechanistic model for dynamic forces Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 280-288. DOI: 10.1115/1.1852569  1
2005 Gong Y, Lin C, Ehmann KF. Dynamics of initial penetration in drilling: Part 2 - Motion models for drill skidding and wandering with experimental verification Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 289-297. DOI: 10.1115/1.1852568  1
2005 Zhao H, Ehmann KF. Topology of spade drills for wood drilling operations part 2: Spade drill point cutting geometry analysis Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 310-318. DOI: 10.1115/1.1794161  1
2005 Zhao H, Ehmann KF. Topology of spade drills for wood drilling operations, part 1: Spade drill point geometry definition Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 298-309. DOI: 10.1115/1.1794160  1
2005 Chiou CH, Hong MS, Ehmann KF. Instantaneous shear plane based cutting force model for end milling Journal of Materials Processing Technology. 170: 164-180. DOI: 10.1016/j.jmatprotec.2005.04.115  1
2005 Ehmann K, DeVor R. An international assessment of micro-manufacturing technology Advanced Materials and Processes. 163: 46.  1
2004 Liu X, DeVor RE, Kapoor SG, Ehmann KF. The mechanics of machining at the microscale: Assessment of the current state of the science Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 666-678. DOI: 10.1115/1.1813469  1
2004 Chiou CH, Hong MS, Ehmann KF. Simulation of machined surface topography in end-milling processes using a shear-plane-based cutting force model Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218: 1767-1793.  1
2003 Zhao H, Ehmann KF. Mechanistic model for spade drills for wood drilling operations, Part 2: Analysis of spade bit geometry and performance Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 236-244. DOI: 10.1115/1.1559157  1
2003 Zhao H, Ehmann KF. Mechanistic model for spade drills for wood drilling operations, Part 1: Model development Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 226-235. DOI: 10.1115/1.1559156  1
2003 Gong Y, Ehmann KF, Lin C. Analysis of dynamic characteristics of micro-drills Journal of Materials Processing Technology. 141: 16-28. DOI: 10.1016/S0924-0136(02)00947-0  1
2003 Chiou CH, Hong MS, Ehmann KF. The feasibility of eigenstructure assignment for machining chatter control International Journal of Machine Tools and Manufacture. 43: 1603-1620. DOI: 10.1016/S0890-6955(03)00185-8  1
2002 Chyan HC, Ehmann KF. Curved helical drill points for microhole drilling Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 216: 61-75. DOI: 10.1243/0954405021519708  1
2002 Wang SM, Ehmann KF. Error model and accuracy analysis of a six-DOF Stewart Platform Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 286-295. DOI: 10.1115/1.1445148  1
2002 Yun WS, Ko JH, Lee HU, Cho DW, Ehmann KF. Development of a virtual machining system, Part 3: Cutting process simulation in transient cuts International Journal of Machine Tools and Manufacture. 42: 1617-1626. DOI: 10.1016/S0890-6955(02)00139-6  1
2002 Yun WS, Ko JH, Cho DW, Ehmann KF. Development of a virtual machining system, Part 2: Prediction and analysis of a machined surface error International Journal of Machine Tools and Manufacture. 42: 1607-1615. DOI: 10.1016/S0890-6955(02)00138-4  1
2002 Ko JH, Yun WS, Cho DW, Ehmann KF. Development of a virtual machining system, Part 1: Approximation of the size effect for cutting force prediction International Journal of Machine Tools and Manufacture. 42: 1595-1605. DOI: 10.1016/S0890-6955(02)00137-2  1
2002 Zhao H, Ehmann KF. Development and performance analysis of new spade bit designs International Journal of Machine Tools and Manufacture. 42: 1403-1414. DOI: 10.1016/S0890-6955(02)00068-8  1
2002 Vogler MP, Liu X, Kapoor SG, DeVor RE, Ehmann KF. Development of meso-scale machine tool (mMT) systems Technical Paper - Society of Manufacturing Engineers. Ms. 1-9.  1
2001 Hu PH, Ehmann KF. Regenerative effect in rolling chatter Journal of Manufacturing Processes. 3: 82-93. DOI: 10.1016/S1526-6125(01)70123-5  1
2001 Gong Y, Ehmann KF. Mechanistic model for dynamic forces in micro-drilling American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 12: 19-28.  1
2001 Hu PH, Ehmann KF. Fifth octave mode chatter in rolling Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215: 797-809.  1
2000 Hu PH, Ehmann KF. Tability analysis of chatter on a tandem rolling mill Journal of Manufacturing Processes. 2: 217-224. DOI: 10.1016/S1526-6125(00)70023-5  1
2000 Patel AJ, Ehmann KF. Calibration of a hexapod machine tool using a redundant leg International Journal of Machine Tools and Manufacture. 40: 489-512. DOI: 10.1016/S0890-6955(99)00081-4  1
2000 Hu PH, Ehmann KF. Dynamic model of the rolling process. Part II: Inhomogeneous model International Journal of Machine Tools and Manufacture. 40: 21-31. DOI: 10.1016/S0890-6955(99)00050-4  1
2000 Hu PH, Ehmann KF. Dynamic model of the rolling process. Part I: Homogeneous model International Journal of Machine Tools and Manufacture. 40: 1-19. DOI: 10.1016/S0890-6955(99)00049-8  1
1999 Cheong MS, Cho DW, Ehmann KF. Identification and control for micro-drilling productivity enhancement International Journal of Machine Tools and Manufacture. 39: 1539-1561. DOI: 10.1016/S0890-6955(99)00019-X  1
1999 Wang SM, Ehmann KF. Measurement methods for the position errors of a multi-axis machine. Part 2: applications and experimental results International Journal of Machine Tools and Manufacture. 39: 1485-1505. DOI: 10.1016/S0890-6955(98)00070-4  1
1999 Chyan HC, Ehmann KF. Tapered-web helical groove machining Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 213: 779-785.  1
1999 Hu PH, Ehmann KF. Stability analysis of chatter on a tandem rolling mill Technical Paper - Society of Manufacturing Engineers. Mf. 1-6.  1
1999 Wang SM, Ehmann KF. Measurement methods for the position errors of a multi-axis machine. Part 1: Principles and sensitivity analysis International Journal of Machine Tools and Manufacture. 39: 951-964.  1
1999 Yun WS, Cho DW, Ehmann KF. Determination of constant 3D cutting force coefficients and of runout parameters in end milling Technical Paper - Society of Manufacturing Engineers. Mr. 1-6.  1
1998 Chyan HC, Ehmann KF. Development of curved helical micro-drill point technology for micro-hole drilling Mechatronics. 8: 337-358.  1
1998 Yun IS, Ehmann KF, Wilson WRD. Chatter in the strip rolling process, Part 2: Dynamic rolling experiments Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 337-342.  1
1998 Yun IS, Wilson WRD, Ehmann KF. Chatter in the strip rolling process, Part 1: Dynamic model of rolling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 330-336.  1
1998 Yun IS, Wilson WRD, Ehmann KF. Review of chatter studies in cold rolling International Journal of Machine Tools and Manufacture. 38: 1499-1530.  1
1998 Yun IS, Ehmann KF, Wilson WRD. Chatter in the strip rolling process, Part 3: Chatter model Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 343-348.  1
1997 Patel AJ, Ehmann KF. Volumetric error analysis of a Stewart platform-based machine tool Cirp Annals - Manufacturing Technology. 46: 287-X62.  1
1997 Kang SK, Ehmann KF, Lin C. A CAD approach to helical groove machining. Part 2: Numerical evaluation and sensitivity analysis International Journal of Machine Tools and Manufacture. 37: 101-117.  1
1997 Ehmann KF, Kapoor SG, DeVor RE, Lazoglu I. Machining process modeling: A review Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 655-663.  1
1996 Kang SK, Ehmann KF, Lin C. A CAD approach to helical groove machining - I. Mathematical model and model solution International Journal of Machine Tools and Manufacture. 36: 141-153. DOI: 10.1016/0890-6955(95)92631-8  1
1996 Lin PD, Ehmann KF. Inverse error analysis for multi-axis machines Journal of Engineering For Industry - Transactions of the Asme. 118: 88-94.  1
1996 Lin PD, Ehmann KF. Sensing of motion related errors in multiaxis machines Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 118: 425-433.  1
1995 Hong MS, Ehmann KF. Generation of engineered surfaces by the surface-shaping system International Journal of Machine Tools and Manufacture. 35: 1269-1290. DOI: 10.1016/0890-6955(94)00114-Y  1
1995 Wijeyewickrema AC, Keer LM, Ehmann KF. Drill wandering motion: Experiment and analysis International Journal of Mechanical Sciences. 37: 495-509. DOI: 10.1016/0020-7403(94)00079-Y  1
1995 Lin C, Kang SK, Ehmann KF. Helical micro-drill point design and grinding Journal of Engineering For Industry. 117: 277-287.  1
1994 Ehmann KF, Hong MS. A Generalized Model of the Surface Generation Process in Metal Cutting Cirp Annals - Manufacturing Technology. 43: 483-486. DOI: 10.1016/S0007-8506(07)62258-6  1
1994 Mei Z, Yang S, Shi H, Chang S, Ehmann KF. Active chatter suppression by on-line variation of the rake and clearance angles in turning- principles and experimental investigations International Journal of Machine Tools and Manufacture. 34: 981-990. DOI: 10.1016/0890-6955(94)90029-9  1
1994 Kwon WT, Ehmann KF. Tool wear monitoring by using the imaginary part of the transfer function of the cutting dynamics International Journal of Machine Tools and Manufacture. 34: 393-406. DOI: 10.1016/0890-6955(94)90008-6  1
1994 Chen WS, Ehmann KF. Experimental investigation on the wear and performance of micro-drills American Society of Mechanical Engineers, Center For Research and Technology Development, (Publication) Crtd. 30: 145-157.  1
1994 Bahr B, Haung JT, Ehmann KF. Sensory guidance of seam tracking robots Journal of Robotic Systems. 11: 67-76.  1
1993 Ehmann KF, Jones PC. Training for manufacturing Master's programs and more Ieee Spectrum. 30: 76-81. DOI: 10.1109/6.275172  1
1993 Lin PD, Ehmann KF. Direct volumetric error evaluation for multi-axis machines International Journal of Machine Tools and Manufacture. 33: 675-693. DOI: 10.1016/0890-6955(93)90100-9  1
1993 Kim HS, Ehmann KF. A cutting force model for face milling operations International Journal of Machine Tools and Manufacture. 33: 651-673. DOI: 10.1016/0890-6955(93)90099-G  1
1993 Lym SJ, Ehmann KF. Fast interpolation algorithm for temporally nonequidistant waypoints Journal of Engineering For Industry. 115: 500-507.  1
1992 Wang SM, Ehmann KF. Volumetric error compensation for multi-axis machines Conference Proceedings - Ieee International Conference On Systems, Man and Cybernetics. 1992: 183-188. DOI: 10.1109/ICSMC.1992.271780  1
1992 Ehmann KF, Kang SK, Lin C. Sensitivity Analysis and Tolerance Allocation for Microplanar Drill Point Grinders Cirp Annals - Manufacturing Technology. 41: 361-365. DOI: 10.1016/S0007-8506(07)61223-2  1
1991 You SJ, Ehmann KF. Computer synthesis of three-dimensional surfaces Wear. 145: 29-42. DOI: 10.1016/0043-1648(91)90237-O  1
1991 You SJ, Ehmann KF. Synthesis and generation of surfaces milled by ball nose end mills under tertiary cutter motion Journal of Engineering For Industry. 113: 17-24.  1
1991 Heo JH, Ehmann KF. Method for substructural sensitivity synthesis Journal of Vibration, Acoustics, Stress, and Reliability in Design. 113: 201-208.  1
1991 Ehmann KF, Lin C. In-process measurement of roundness and cylindricity American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 55: 59-71.  1
1991 Jalisi MN, Lin C, Ehmann KF. Modeling and experimental analysis of margin forces in microdrilling American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 131: 25-33.  1
1990 Ehmann KF. The feasibility of a new method for scallop removal in die milling Sae Technical Papers. DOI: 10.4271/900510  1
1990 Ehmann KF, DeVries MF. Grinding Wheel Profile Definition for the Manufacture of Drill Flutes Cirp Annals - Manufacturing Technology. 39: 153-156. DOI: 10.1016/S0007-8506(07)61024-5  1
1990 Ehmann KF. Solution principles for a new generation of precision self-correcting multi-axis machines Robotics and Computer Integrated Manufacturing. 7: 357-364. DOI: 10.1016/0736-5845(90)90022-Z  1
Show low-probability matches.