Year |
Citation |
Score |
2020 |
White SN, Green CC, McMeeking RM. A simple 3-point flexural method for measuring fracture toughness of the dental porcelain to zirconia bond and other brittle bimaterial interfaces. Journal of Prosthodontic Research. PMID 32063538 DOI: 10.1016/J.Jpor.2019.11.002 |
0.31 |
|
2020 |
McMeeking RM, Ciavarella M, Cricrì G, Kim K. The Interaction of Frictional Slip and Adhesion for a Stiff Sphere on a Compliant Substrate Journal of Applied Mechanics. 87: 31016. DOI: 10.1115/1.4045794 |
0.358 |
|
2020 |
Gockowski LF, Dolinski ND, Chavez R, Cohen N, Eisenreich F, Hecht S, McMeeking RM, Hawker CJ, Valentine MT. Engineering crack tortuosity in printed polymer–polymer composites through ordered pores Materials Horizons. 7: 1854-1860. DOI: 10.1039/D0Mh00331J |
0.354 |
|
2020 |
Cao H, Wu MH, Zhou F, McMeeking RM, Ritchie RO. The Influence of Mean Strain on the High-Cycle Fatigue of Nitinol with Application to Medical Devices Journal of the Mechanics and Physics of Solids. 143: 104057. DOI: 10.1016/J.Jmps.2020.104057 |
0.303 |
|
2020 |
McMeeking RM, Lucantonio A, Noselli G, Deshpande VS. On polymer network rupture in gels in the limit of very slow straining or a very slow crack propagation rate Journal of the Mechanics and Physics of Solids. 136: 103754. DOI: 10.1016/J.Jmps.2019.103754 |
0.373 |
|
2020 |
Vigliotti A, Shishvan SS, McMeeking RM, Deshpande VS. Response of cells on a dense array of micro-posts Meccanica. 1-17. DOI: 10.1007/S11012-020-01208-Z |
0.301 |
|
2019 |
Cohen N, Waite JH, McMeeking RM, Valentine MT. Force distribution and multiscale mechanics in the mussel byssus. Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences. 374: 20190202. PMID 31495310 DOI: 10.1098/Rstb.2019.0202 |
0.329 |
|
2019 |
Booth JA, Tinnemann V, Hensel R, Arzt E, McMeeking RM, Foster KL. Statistical properties of defect-dependent detachment strength in bioinspired dry adhesives. Journal of the Royal Society, Interface. 16: 20190239. PMID 31362613 DOI: 10.1098/Rsif.2019.0239 |
0.314 |
|
2019 |
Cohen N, Deshpande VS, Holmes JW, McMeeking RM. A microscopically motivated model for the remodeling of cardiomyocytes. Biomechanics and Modeling in Mechanobiology. PMID 30919201 DOI: 10.1007/S10237-019-01141-5 |
0.323 |
|
2019 |
Cohen N, McMeeking RM, Begley MR. Modeling the non-linear elastic response of periodic lattice materials Mechanics of Materials. 129: 159-168. DOI: 10.1016/J.Mechmat.2018.11.010 |
0.368 |
|
2019 |
Klinsmann M, Hildebrand FE, Ganser M, McMeeking RM. Dendritic cracking in solid electrolytes driven by lithium insertion Journal of Power Sources. 442: 227226. DOI: 10.1016/J.Jpowsour.2019.227226 |
0.347 |
|
2019 |
Wehmeyer S, Zok FW, Eberl C, Gumbsch P, Cohen N, McMeeking RM, Begley MR. Post-buckling and dynamic response of angled struts in elastic lattices Journal of the Mechanics and Physics of Solids. 133: 103693. DOI: 10.1016/J.Jmps.2019.103693 |
0.335 |
|
2019 |
Ganser M, Hildebrand FE, Kamlah M, McMeeking RM. A finite strain electro-chemo-mechanical theory for ion transport with application to binary solid electrolytes Journal of the Mechanics and Physics of Solids. 125: 681-713. DOI: 10.1016/J.Jmps.2019.01.004 |
0.335 |
|
2018 |
Chen K, Vigliotti A, Bacca M, McMeeking RM, Deshpande VS, Holmes JW. Role of boundary conditions in determining cell alignment in response to stretch. Proceedings of the National Academy of Sciences of the United States of America. PMID 29343646 DOI: 10.1073/Pnas.1715059115 |
0.311 |
|
2018 |
Shishvan SS, McMeeking RM, Pollock TM, Deshpande VS. Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites Materials Science and Engineering: A. 712: 714-719. DOI: 10.1016/J.Msea.2017.12.034 |
0.375 |
|
2018 |
Salvadori A, McMeeking R, Grazioli D, Magri M. A coupled model of transport-reaction-mechanics with trapping. Part I – Small strain analysis Journal of the Mechanics and Physics of Solids. 114: 1-30. DOI: 10.1016/J.Jmps.2018.02.006 |
0.337 |
|
2017 |
Berger JB, Wadley HN, McMeeking RM. Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness. Nature. PMID 28219078 DOI: 10.1038/Nature21075 |
0.38 |
|
2017 |
Bacca M, Creton C, McMeeking RM. A Model for the Mullins Effect in Multinetwork Elastomers Journal of Applied Mechanics. 84. DOI: 10.1115/1.4037881 |
0.319 |
|
2017 |
Fleck N, Khaderi S, McMeeking R, Arzt E. Cohesive detachment of an elastic pillar from a dissimilar substrate Journal of the Mechanics and Physics of Solids. 101: 30-43. DOI: 10.1016/J.Jmps.2017.01.001 |
0.423 |
|
2017 |
Balijepalli RG, Fischer SC, Hensel R, McMeeking RM, Arzt E. Numerical study of adhesion enhancement by composite fibrils with soft tip layers Journal of the Mechanics and Physics of Solids. 99: 357-378. DOI: 10.1016/J.Jmps.2016.11.017 |
0.38 |
|
2017 |
Shishvan SS, Pollock TM, McMeeking RM, Deshpande VS. Interfacial diffusion in high-temperature deformation of composites: A discrete dislocation plasticity investigation Journal of the Mechanics and Physics of Solids. 98: 330-349. DOI: 10.1016/J.Jmps.2016.09.002 |
0.393 |
|
2017 |
Bacca M, Fleck NA, McMeeking RM. A swell toughening strategy for elastomers having surface cracks Extreme Mechanics Letters. 10: 32-40. DOI: 10.1016/J.Eml.2016.11.010 |
0.36 |
|
2017 |
do Rosário JJ, Berger JB, Lilleodden ET, McMeeking RM, Schneider GA. The stiffness and strength of metamaterials based on the inverse opal architecture Extreme Mechanics Letters. 12: 86-96. DOI: 10.1016/J.Eml.2016.07.006 |
0.396 |
|
2017 |
Shishvan SS, McMeeking RM, Pollock TM, Deshpande VS. Discrete dislocation plasticity analysis of the effect of interfacial diffusion on the creep response of Ni single-crystal superalloys Acta Materialia. 135: 188-200. DOI: 10.1016/J.Actamat.2017.06.026 |
0.357 |
|
2017 |
Bacca M, McMeeking RM. A viscoelastic constitutive law for hydrogels Meccanica. 52: 3345-3355. DOI: 10.1007/S11012-017-0636-Y |
0.36 |
|
2016 |
Klinsmann M, Rosato D, Kamlah M, McMeeking RM. Modeling crack growth during Li extraction and insertion within the second half cycle Journal of Power Sources. 331: 32-42. DOI: 10.1016/J.Jpowsour.2016.08.142 |
0.418 |
|
2016 |
Noselli G, Lucantonio A, McMeeking RM, Desimone A. Poroelastic toughening in polymer gels: A theoretical and numerical study Journal of the Mechanics and Physics of Solids. 94: 33-46. DOI: 10.1016/J.Jmps.2016.04.017 |
0.342 |
|
2016 |
Klinsmann M, Rosato D, Kamlah M, McMeeking RM. Modeling crack growth during Li insertion in storage particles using a fracture phase field approach Journal of the Mechanics and Physics of Solids. 92: 313-344. DOI: 10.1016/J.Jmps.2016.04.004 |
0.425 |
|
2016 |
Balijepalli RG, Begley MR, Fleck NA, McMeeking RM, Arzt E. Numerical simulation of the edge stress singularity and the adhesion strength for compliant mushroom fibrils adhered to rigid substrates International Journal of Solids and Structures. 85: 160-171. DOI: 10.1016/J.Ijsolstr.2016.02.018 |
0.382 |
|
2016 |
Jiménez SM, McMeeking RM. A constitutive law for dielectric elastomers subject to high levels of stretch during combined electrostatic and mechanical loading: Elastomer stiffening and deformation dependent dielectric permittivity International Journal of Non-Linear Mechanics. 87: 125-136. DOI: 10.1016/J.Ijnonlinmec.2016.10.004 |
0.357 |
|
2016 |
Purkayastha R, McMeeking R. Stress due to the intercalation of lithium in cubic-shaped particles: a parameter study Meccanica. 51: 3081-3096. DOI: 10.1007/S11012-016-0540-X |
0.801 |
|
2015 |
Vigliotti A, McMeeking RM, Deshpande VS. Simulation of the cytoskeletal response of cells on grooved or patterned substrates. Journal of the Royal Society, Interface / the Royal Society. 12. PMID 25762648 DOI: 10.1098/Rsif.2014.1320 |
0.345 |
|
2015 |
Ronan W, McMeeking RM, Chen CS, McGarry JP, Deshpande VS. Cooperative contractility: the role of stress fibres in the regulation of cell-cell junctions. Journal of Biomechanics. 48: 520-8. PMID 25553672 DOI: 10.1016/J.Jbiomech.2014.11.025 |
0.317 |
|
2015 |
Klinsmann M, Rosato D, Kamlah M, McMeeking RM. Modeling Crack Growth during Li Extraction in Storage Particles Using a Fracture Phase Field Approach Journal of the Electrochemical Society. 163: A102-A118. DOI: 10.1149/2.0281602Jes |
0.352 |
|
2015 |
Bacca M, Hayhurst DR, McMeeking RM. Continuous dynamic recrystallization during severe plastic deformation Mechanics of Materials. 90: 148-156. DOI: 10.1016/J.Mechmat.2015.05.008 |
0.338 |
|
2015 |
Holland CC, Gamble EA, Zok FW, Deshpande VS, McMeeking RM. Effect of design on the performance of steel-alumina bilayers and trilayers subject to ballistic impact Mechanics of Materials. 91: 241-251. DOI: 10.1016/J.Mechmat.2015.05.002 |
0.764 |
|
2015 |
Swolfs Y, McMeeking RM, Rajan VP, Zok FW, Verpoest I, Gorbatikh L. Global load-sharing model for unidirectional hybrid fibre-reinforced composites Journal of the Mechanics and Physics of Solids. 84: 380-394. DOI: 10.1016/J.Jmps.2015.08.009 |
0.304 |
|
2015 |
Begley MR, Creton C, McMeeking RM. The elastostatic plane strain mode I crack tip stress and displacement fields in a generalized linear neo-Hookean elastomer Journal of the Mechanics and Physics of Solids. 84: 21-38. DOI: 10.1016/J.Jmps.2015.07.005 |
0.434 |
|
2015 |
Khaderi S, Fleck N, Arzt E, McMeeking R. Detachment of an adhered micropillar from a dissimilar substrate Journal of the Mechanics and Physics of Solids. 75: 159-183. DOI: 10.1016/J.Jmps.2014.11.004 |
0.371 |
|
2015 |
Holland CC, McMeeking RM. The influence of mechanical and microstructural properties on the rate-dependent fracture strength of ceramics in uniaxial compression International Journal of Impact Engineering. 81: 34-49. DOI: 10.1016/J.Ijimpeng.2015.02.007 |
0.788 |
|
2015 |
Swolfs Y, McMeeking RM, Verpoest I, Gorbatikh L. Matrix cracks around fibre breaks and their effect on stress redistribution and failure development in unidirectional composites Composites Science and Technology. 108: 16-22. DOI: 10.1016/J.Compscitech.2015.01.002 |
0.425 |
|
2015 |
Klinsmann M, Rosato D, Kamlah M, McMeeking RM. An assessment of the phase field formulation for crack growth Computer Methods in Applied Mechanics and Engineering. 294: 313-330. DOI: 10.1016/J.Cma.2015.06.009 |
0.369 |
|
2014 |
Collino RR, Philips NR, Rossol MN, McMeeking RM, Begley MR. Detachment of compliant films adhered to stiff substrates via van der Waals interactions: role of frictional sliding during peeling. Journal of the Royal Society, Interface / the Royal Society. 11: 20140453. PMID 24920120 DOI: 10.1098/Rsif.2014.0453 |
0.339 |
|
2014 |
Reynolds NH, Ronan W, Dowling EP, Owens P, McMeeking RM, McGarry JP. On the role of the actin cytoskeleton and nucleus in the biomechanical response of spread cells. Biomaterials. 35: 4015-25. PMID 24529900 DOI: 10.1016/J.Biomaterials.2014.01.056 |
0.375 |
|
2014 |
Ronan W, Deshpande VS, McMeeking RM, McGarry JP. Cellular contractility and substrate elasticity: a numerical investigation of the actin cytoskeleton and cell adhesion. Biomechanics and Modeling in Mechanobiology. 13: 417-35. PMID 23775256 DOI: 10.1007/S10237-013-0506-Z |
0.392 |
|
2014 |
Xu W, Zok FW, Mcmeeking RM. Model of Oxidation-Induced Fiber Fracture in SiC/SiC Composites Journal of the American Ceramic Society. DOI: 10.1111/Jace.13180 |
0.35 |
|
2014 |
McMeeking RM, Purkayastha R. The Role of Solid Mechanics in Electrochemical Energy Systems such as Lithium-ion Batteries Procedia Iutam. 10: 294-306. DOI: 10.1016/J.Piutam.2014.01.025 |
0.422 |
|
2014 |
Abdeljawad F, Völker B, Davis R, McMeeking RM, Haataja M. Connecting microstructural coarsening processes to electrochemical performance in solid oxide fuel cells: An integrated modeling approach Journal of Power Sources. 250: 319-331. DOI: 10.1016/J.Jpowsour.2013.10.121 |
0.333 |
|
2014 |
Gialamas P, Völker B, Collino RR, Begley MR, McMeeking RM. Peeling of an elastic membrane tape adhered to a substrate by a uniform cohesive traction International Journal of Solids and Structures. 51: 3003-3011. DOI: 10.1016/J.Ijsolstr.2014.04.001 |
0.321 |
|
2013 |
Ronan W, Pathak A, Deshpande VS, McMeeking RM, McGarry JP. Simulation of the mechanical response of cells on micropost substrates. Journal of Biomechanical Engineering. 135: 101012. PMID 23896758 DOI: 10.1115/1.4025114 |
0.583 |
|
2013 |
Paretkar D, Kamperman M, Martina D, Zhao J, Creton C, Lindner A, Jagota A, McMeeking R, Arzt E. Preload-responsive adhesion: effects of aspect ratio, tip shape and alignment. Journal of the Royal Society, Interface / the Royal Society. 10: 20130171. PMID 23554348 DOI: 10.1098/Rsif.2013.0171 |
0.306 |
|
2013 |
Bohn E, Eckl T, Kamlah M, McMeeking R. A Model for Lithium Diffusion and Stress Generation in an Intercalation Storage Particle with Phase Change Journal of the Electrochemical Society. 160: A1638-A1652. DOI: 10.1149/2.011310Jes |
0.356 |
|
2013 |
Ma L, Korsunsky AM, McMeeking RM. Fundamental Formulation for Transformation Toughening in Anisotropic Solids Journal of Applied Mechanics. 80. DOI: 10.1115/1.4023476 |
0.319 |
|
2013 |
Stark S, Begley MR, McMeeking RM. The Buckling and Postbuckling of Fibrils Adhering to a Rigid Surface Journal of Applied Mechanics. 80. DOI: 10.1115/1.4023107 |
0.304 |
|
2013 |
Paretkar DR, Bartlett MD, McMeeking R, Crosby AJ, Arzt E. Buckling of an adhesive polymeric micropillar Journal of Adhesion. 89: 140-158. DOI: 10.1080/00218464.2013.731941 |
0.368 |
|
2013 |
Begley MR, Collino RR, Israelachvili JN, McMeeking RM. Peeling of a tape with large deformations and frictional sliding Journal of the Mechanics and Physics of Solids. 61: 1265-1279. DOI: 10.1016/J.Jmps.2012.09.014 |
0.354 |
|
2013 |
Jiménez SM, McMeeking RM. Deformation dependent dielectric permittivity and its effect on actuator performance and stability International Journal of Non-Linear Mechanics. 57: 183-191. DOI: 10.1016/J.Ijnonlinmec.2013.08.001 |
0.327 |
|
2013 |
Purkayastha R, McMeeking R. A parameter study of intercalation of lithium into storage particles in a lithium-ion battery Computational Materials Science. 80: 2-14. DOI: 10.1016/J.Commatsci.2012.11.050 |
0.796 |
|
2013 |
Ott J, Völker B, Gan Y, McMeeking RM, Kamlah M. A micromechanical model for effective conductivity in granular electrode structures Acta Mechanica Sinica. 29: 682-698. DOI: 10.1007/S10409-013-0070-X |
0.351 |
|
2012 |
Ronan W, Deshpande VS, McMeeking RM, McGarry JP. Numerical investigation of the active role of the actin cytoskeleton in the compression resistance of cells. Journal of the Mechanical Behavior of Biomedical Materials. 14: 143-57. PMID 23026692 DOI: 10.1016/J.Jmbbm.2012.05.016 |
0.376 |
|
2012 |
Dowling EP, Ronan W, Ofek G, Deshpande VS, McMeeking RM, Athanasiou KA, McGarry JP. The effect of remodelling and contractility of the actin cytoskeleton on the shear resistance of single cells: a computational and experimental investigation. Journal of the Royal Society, Interface / the Royal Society. 9: 3469-79. PMID 22809850 DOI: 10.1098/Rsif.2012.0428 |
0.346 |
|
2012 |
Purkayastha RT, McMeeking RM. The use of non-dimensional parameters to study stress in lithiumion battery electrode storage particles Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 6: 417-421. DOI: 10.1115/IMECE2012-85267 |
0.799 |
|
2012 |
Pathak A, Chen CS, Evans AG, McMeeking RM. Structural mechanics based model for the force-bearing elements within the cytoskeleton of a cell adhered on a bed of posts Journal of Applied Mechanics, Transactions Asme. 79. DOI: 10.1115/1.4006452 |
0.573 |
|
2012 |
Carka D, McMeeking RM, Landis CM. A note on the path-dependence of the J-integral near a stationary crack in an elastic-plastic material with finite deformation Journal of Applied Mechanics, Transactions Asme. 79. DOI: 10.1115/1.4006255 |
0.408 |
|
2012 |
Purkayastha R, McMeeking RM. A Linearized Model for Lithium Ion Batteries and Maps for their Performance and Failure Journal of Applied Mechanics. 79. DOI: 10.1115/1.4005962 |
0.781 |
|
2012 |
Völker B, McMeeking RM. Impact of particle size ratio and volume fraction on effective material parameters and performance in solid oxide fuel cell electrodes Journal of Power Sources. 215: 199-215. DOI: 10.1016/J.Jpowsour.2012.05.014 |
0.345 |
|
2012 |
Crowell MW, Schaedler TA, Hazel BH, Konitzer DG, McMeeking RM, Evans AG. Experiments and numerical simulations of single particle foreign object damage-like impacts of thermal barrier coatings International Journal of Impact Engineering. 48: 116-124. DOI: 10.1016/J.Ijimpeng.2011.10.006 |
0.755 |
|
2012 |
Purkayastha RT, McMeeking RM. An integrated 2-D model of a lithium ion battery: The effect of material parameters and morphology on storage particle stress Computational Mechanics. 50: 209-227. DOI: 10.1007/S00466-012-0724-8 |
0.795 |
|
2011 |
Vermaak N, Valdevit L, Evans AG, Zok FW, Mcmeeking RM. Implications of shakedown for design of actively cooled thermostructural panels Journal of Mechanics of Materials and Structures. 6: 1313-1327. DOI: 10.2140/Jomms.2011.6.1313 |
0.671 |
|
2011 |
Pathak A, McMeeking RM, Evans AG, Deshpande VS. An analysis of the cooperative mechano-sensitive feedback between intracellular signaling, focal adhesion development, and stress fiber contractility Journal of Applied Mechanics, Transactions Asme. 78. DOI: 10.1115/1.4003705 |
0.554 |
|
2011 |
Deshpande VS, Gamble EAN, Compton BG, McMeeking RM, Evans AG, Zok FW. A constitutive description of the inelastic response of ceramics Journal of the American Ceramic Society. 94: S204-S214. DOI: 10.1111/J.1551-2916.2011.04516.X |
0.424 |
|
2011 |
Berger J, Mercer C, McMeeking RM, Evans AG. The Design of Bonded Bimaterial Lattices that Combine Low Thermal Expansion with High Stiffness Journal of the American Ceramic Society. 94: s42-s54. DOI: 10.1111/J.1551-2916.2011.04503.X |
0.347 |
|
2010 |
Guidoni GM, Schillo D, Hangen U, Castellanos G, Arzt E, McMeeking RM, Bennewitz R. Discrete contact mechanics of a fibrillar surface with backing layer interactions Journal of the Mechanics and Physics of Solids. 58: 1571-1581. DOI: 10.1016/J.Jmps.2010.07.009 |
0.331 |
|
2010 |
Wadley HNG, Dharmasena KP, He MY, McMeeking RM, Evans AG, Bui-Thanh T, Radovitzky R. An active concept for limiting injuries caused by air blasts International Journal of Impact Engineering. 37: 317-323. DOI: 10.1016/J.Ijimpeng.2009.06.006 |
0.362 |
|
2010 |
McMeeking RM, Ma L, Arzt E. Bi-Stable Adhesion of a Surface with a Dimple Advanced Engineering Materials. 12: 389-397. DOI: 10.1002/Adem.201000091 |
0.304 |
|
2009 |
McGarry JP, Fu J, Yang MT, Chen CS, McMeeking RM, Evans AG, Deshpande VS. Simulation of the contractile response of cells on an array of micro-posts. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 367: 3477-97. PMID 19657008 DOI: 10.1098/Rsta.2009.0097 |
0.329 |
|
2009 |
Legant WR, Pathak A, Yang MT, Deshpande VS, McMeeking RM, Chen CS. Microfabricated tissue gauges to measure and manipulate forces from 3D microtissues. Proceedings of the National Academy of Sciences of the United States of America. 106: 10097-102. PMID 19541627 DOI: 10.1073/Pnas.0900174106 |
0.534 |
|
2009 |
McMeeking RM, Ma L, Arzt E. Mechanism Maps for Frictional Attachment Between Fibrillar Surfaces Journal of Applied Mechanics. 76. DOI: 10.1115/1.3002760 |
0.39 |
|
2009 |
Deshpande VS, McMeeking RM, Wadley HNG, Evans AG. Constitutive model for predicting dynamic interactions between soil ejecta and structural panels Journal of the Mechanics and Physics of Solids. 57: 1139-1164. DOI: 10.1016/J.Jmps.2009.05.001 |
0.37 |
|
2008 |
Spuskanyuk AV, McMeeking RM, Deshpande VS, Arzt E. The effect of shape on the adhesion of fibrillar surfaces Acta Biomaterialia. 4: 1669-1676. PMID 18621593 DOI: 10.1016/J.Actbio.2008.05.026 |
0.336 |
|
2008 |
Wei Z, Deshpande VS, McMeeking RM, Evans AG. Analysis and interpretation of stress fiber organization in cells subject to cyclic stretch. Journal of Biomechanical Engineering. 130: 031009. PMID 18532858 DOI: 10.1115/1.2907745 |
0.709 |
|
2008 |
Pathak A, Deshpande VS, McMeeking RM, Evans AG. The simulation of stress fibre and focal adhesion development in cells on patterned substrates. Journal of the Royal Society, Interface / the Royal Society. 5: 507-24. PMID 17939980 DOI: 10.1098/Rsif.2007.1182 |
0.755 |
|
2008 |
Deshpande VS, Mrksich M, McMeeking RM, Evans AG. A bio-mechanical model for coupling cell contractility with focal adhesion formation Journal of the Mechanics and Physics of Solids. 56: 1484-1510. DOI: 10.1016/J.Jmps.2007.08.006 |
0.36 |
|
2008 |
Pathak A, McMeeking RM. Three-dimensional finite element simulations of ferroelectric polycrystals under electrical and mechanical loading Journal of the Mechanics and Physics of Solids. 56: 663-683. DOI: 10.1016/J.Jmps.2007.05.003 |
0.566 |
|
2008 |
McMeeking RM, Spuskanyuk AV, He MY, Deshpande VS, Fleck NA, Evans AG. An analytic model for the response to water blast of unsupported metallic sandwich panels International Journal of Solids and Structures. 45: 478-496. DOI: 10.1016/J.Ijsolstr.2007.08.003 |
0.326 |
|
2008 |
Li W, McMeeking RM, Landis CM. On the crack face boundary conditions in electromechanical fracture and an experimental protocol for determining energy release rates European Journal of Mechanics - a/Solids. 27: 285-301. DOI: 10.1016/J.Euromechsol.2007.08.007 |
0.376 |
|
2008 |
Crowell MW, Wang J, McMeeking RM, Evans AG. Dynamics of kink band formation in columnar thermal barrier oxides Acta Materialia. 56: 4150-4159. DOI: 10.1016/J.Actamat.2008.04.058 |
0.748 |
|
2007 |
Ma L, McMeeking R, Arzt E. Adhesive contact between flat punches with finite edge radius and an elastic half-space International Journal of Materials Research. 98: 1156-1162. DOI: 10.3139/146.101579 |
0.318 |
|
2007 |
McGarry JP, O’Donnell BP, McHugh PE, O’Cearbhaill E, McMeeking RM. Computational Examination of the Effect of Material Inhomogeneity on the Necking of Stent Struts Under Tensile Loading Journal of Applied Mechanics. 74: 978-989. DOI: 10.1115/1.2722776 |
0.394 |
|
2007 |
Deshpande VS, McMeeking RM, Evans AG. A model for the contractility of the cytoskeleton including the effects of stress-fibre formation and dissociation Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 463: 787-815. DOI: 10.1098/Rspa.2006.1793 |
0.406 |
|
2007 |
Hbaieb K, McMeeking RM, Lange FF. Crack bifurcation in laminar ceramics having large compressive stress International Journal of Solids and Structures. 44: 3328-3343. DOI: 10.1016/J.Ijsolstr.2006.09.023 |
0.77 |
|
2007 |
McMeeking RM, Landis CM, Jimenez SM. A principle of virtual work for combined electrostatic and mechanical loading of materials International Journal of Non-Linear Mechanics. 42: 831-838. DOI: 10.1016/J.Ijnonlinmec.2007.03.008 |
0.37 |
|
2006 |
Deshpande VS, McMeeking RM, Evans AG. A bio-chemo-mechanical model for cell contractility. Proceedings of the National Academy of Sciences of the United States of America. 103: 14015-20. PMID 16959880 DOI: 10.1073/Pnas.0605837103 |
0.707 |
|
2006 |
Haug A, McMeeking R. Cracks with surface charge in poled ferroelectrics European Journal of Mechanics - a/Solids. 25: 24-41. DOI: 10.1016/J.Euromechsol.2005.07.004 |
0.565 |
|
2005 |
Jo´nsdo´ttir F, Beltz GE, McMeeking RM. Modeling of Threshold Strength in Cylindrical Ceramic Structures Journal of Applied Mechanics. 72: 381-388. DOI: 10.1115/1.1831296 |
0.453 |
|
2005 |
Fair GE, He MY, McMeeking RM, Lange FF. Ceramic Composites with Three-Dimensional Architectures Designed to Produce a Threshold Strength-II. Mechanical Observations Journal of the American Ceramic Society. 88: 1879-1885. DOI: 10.1111/J.1551-2916.2005.00377.X |
0.405 |
|
2005 |
Bouvard D, McMeeking RM. Deformation of Interparticle Necks by Diffusion-Controlled Creep Journal of the American Ceramic Society. 79: 666-672. DOI: 10.1111/J.1151-2916.1996.Tb07927.X |
0.366 |
|
2005 |
Zok FW, Rathbun H, He M, Ferri E, Mercer C, McMeeking RM, Evans AG. Structural performance of metallic sandwich panels with square honeycomb cores Philosophical Magazine. 85: 3207-3234. DOI: 10.1080/14786430500073945 |
0.637 |
|
2005 |
Selten M, Schneider GA, Knoblauch V, McMeeking RM. On the evolution of the linear material properties of PZT during loading history-an experimental study International Journal of Solids and Structures. 42: 3953-3966. DOI: 10.1016/J.Ijsolstr.2004.12.004 |
0.325 |
|
2005 |
Kamlah M, Liskowsky AC, McMeeking RM, Balke H. Finite element simulation of a polycrystalline ferroelectric based on a multidomain single crystal switching model International Journal of Solids and Structures. 42: 2949-2964. DOI: 10.1016/J.Ijsolstr.2004.09.045 |
0.322 |
|
2004 |
McMeeking RM, Landis CM. Electrostatic Forces and Stored Energy for Deformable Dielectric Materials Journal of Applied Mechanics. 72: 581-590. DOI: 10.1115/1.1940661 |
0.381 |
|
2004 |
Fujita H, Jefferson G, McMeeking RM, Zok FW. Mullite/Alumina Mixtures for Use as Porous Matrices in Oxide Fiber Composites Journal of the American Ceramic Society. 87: 261-267. DOI: 10.1111/J.1551-2916.2004.00261.X |
0.359 |
|
2004 |
McMeeking RM. The energy release rate for a Griffith crack in a piezoelectric material Engineering Fracture Mechanics. 71: 1149-1163. DOI: 10.1016/S0013-7944(03)00135-8 |
0.359 |
|
2004 |
Zok FW, Waltner SA, Wei Z, Rathbun HJ, McMeeking RM, Evans AG. A protocol for characterizing the structural performance of metallic sandwich panels: Application to pyramidal truss cores International Journal of Solids and Structures. 41: 6249-6271. DOI: 10.1016/J.Ijsolstr.2004.05.045 |
0.364 |
|
2004 |
dos Santos e Lucato S, Wang J, Maxwell P, McMeeking R, Evans A. Design and demonstration of a high authority shape morphing structure International Journal of Solids and Structures. 41: 3521-3543. DOI: 10.1016/J.Ijsolstr.2004.02.012 |
0.334 |
|
2003 |
Schneider GA, Felten F, McMeeking RM. The electrical potential difference across cracks in PZT measured by Kelvin probe microscopy and the implications for fracture Acta Materialia. 51: 2235-2241. DOI: 10.1016/S1359-6454(03)00027-2 |
0.367 |
|
2003 |
McGlockton M, Cox B, McMeeking R. A Binary Model of textile composites: III high failure strain and work of fracture in 3D weaves Journal of the Mechanics and Physics of Solids. 51: 1573-1600. DOI: 10.1016/S0022-5096(03)00038-3 |
0.346 |
|
2003 |
McMeeking R, Ricoeur A. The weight function for cracks in piezoelectrics International Journal of Solids and Structures. 40: 6143-6162. DOI: 10.1016/S0020-7683(03)00366-4 |
0.379 |
|
2003 |
Haug A, Knoblauch V, McMeeking RM. Combined isotropic and kinematic hardening in phenomenological switching models for ferroelectric ceramics International Journal of Engineering Science. 41: 887-901. DOI: 10.1016/S0020-7225(02)00320-8 |
0.545 |
|
2002 |
Hbaieb K, McMeeking RM. Threshold strength predictions for laminar ceramics with cracks that grow straight Mechanics of Materials. 34: 755-772. DOI: 10.1016/S0167-6636(02)00179-5 |
0.776 |
|
2002 |
Jefferson G, Haritos GK, McMeeking RM. The elastic response of a cohesive aggregate: a discrete element model with coupled particle interaction Journal of the Mechanics and Physics of Solids. 50: 2539-2575. DOI: 10.1016/S0022-5096(02)00051-0 |
0.381 |
|
2002 |
McMeeking RM, Landis CM. A phenomenological multi-axial constitutive law for switching in polycrystalline ferroelectric ceramics International Journal of Engineering Science. 40: 1553-1577. DOI: 10.1016/S0020-7225(02)00033-2 |
0.326 |
|
2001 |
Landis CM, McMeeking RM. A self-consistent constitutive model for switching in polycrystalline barium titanate Ferroelectrics. 255: 13-34. DOI: 10.1080/00150190108225965 |
0.305 |
|
2001 |
McMeeking RM. International Journal of Fracture. 108: 25-41. DOI: 10.1023/A:1007652001977 |
0.398 |
|
2001 |
Heyliger PR, McMeeking RM. Cold plastic compaction of powders by a network model Journal of the Mechanics and Physics of Solids. 49: 2031-2054. DOI: 10.1016/S0022-5096(01)00038-2 |
0.355 |
|
2000 |
Landis CM, Beyerlein IJ, McMeeking RM. Micromechanical simulation of the failure of fiber reinforced composites Journal of the Mechanics and Physics of Solids. 48: 621-648. DOI: 10.1016/S0022-5096(99)00051-4 |
0.305 |
|
1999 |
Rao MP, Sánchez-Herencia AJ, Beltz GE, McMeeking RM, Lange FF. Laminar Ceramics That Exhibit a Threshold Strength. Science (New York, N.Y.). 286: 102-105. PMID 10506553 DOI: 10.1126/Science.286.5437.102 |
0.365 |
|
1999 |
Landis CM, Mcmeeking RM. A Phenomenological Constitutive Law for Ferroelastic Switching and a Resulting Asymptotic Crack Tip Solution Journal of Intelligent Material Systems and Structures. 10: 155-163. DOI: 10.1177/1045389X9901000209 |
0.441 |
|
1999 |
Landis CM, McGlockton MA, McMeeking RM. An Improved Shear Lag Model for Broken Fibers in Composite Materials Journal of Composite Materials. 33: 667-680. DOI: 10.1177/002199839903300704 |
0.365 |
|
1999 |
Cocks AC, Mcmeeking RM. A phenomenological constitutive law for the behaviour of ferroelectric ceramics Ferroelectrics. 228: 219-228. DOI: 10.1080/00150199908226136 |
0.343 |
|
1999 |
Landis CM, McMeeking RM. A shear-lag model for a broken fiber embedded in a composite with a ductile matrix Composites Science and Technology. 59: 447-457. DOI: 10.1016/S0266-3538(98)00091-8 |
0.4 |
|
1999 |
Parhami F, McMeeking R, Cocks A, Suo Z. A model for the sintering and coarsening of rows of spherical particles Mechanics of Materials. 31: 43-61. DOI: 10.1016/S0167-6636(98)00049-0 |
0.334 |
|
1999 |
Storåkers B, Fleck N., McMeeking R. The viscoplastic compaction of composite powders Journal of the Mechanics and Physics of Solids. 47: 785-815. DOI: 10.1016/S0022-5096(98)00076-3 |
0.405 |
|
1999 |
Landis CM, McMeeking RM. Stress concentrations in composites with interface sliding, matrix stiffness and uneven fiber spacing using shear lag theory International Journal of Solids and Structures. 36: 4333-4361. DOI: 10.1016/S0020-7683(98)00193-0 |
0.341 |
|
1999 |
Hwang SC, McMeeking RM. A finite element model of ferroelastic polycrystals International Journal of Solids and Structures. 36: 1541-1556. DOI: 10.1016/S0020-7683(98)00051-1 |
0.407 |
|
1999 |
McMeeking RM. Crack tip energy release rate for a piezoelectric compact tension specimen Engineering Fracture Mechanics. 64: 217-244. DOI: 10.1016/S0013-7944(99)00068-5 |
0.405 |
|
1998 |
Begley MR, Cox BN, McMeeking RM. Time-Dependent Crack Initiation and Growth in Ceramic Matrix Composites Journal of Engineering For Gas Turbines and Power. 120: 808-812. DOI: 10.1115/1.2818472 |
0.376 |
|
1998 |
Hwang SC, McMeeking RM. A finite element model of ferroelectric polycrystals Ferroelectrics. 211: 177-194. DOI: 10.1080/00150199808232342 |
0.321 |
|
1998 |
Hwang SC, Mcmeeking RM. The prediction of switching in polycrystalline ferroelectric ceramics Ferroelectrics. 207: 465-495. DOI: 10.1080/00150199808217263 |
0.392 |
|
1998 |
Hwang SC, Huber JE, McMeeking RM, Fleck NA. The simulation of switching in polycrystalline ferroelectric ceramics Journal of Applied Physics. 84: 1530-1540. DOI: 10.1063/1.368219 |
0.367 |
|
1998 |
Parhami F, McMeeking RM. A network model for initial stage sintering Mechanics of Materials. 27: 111-124. DOI: 10.1016/S0167-6636(97)00034-3 |
0.365 |
|
1997 |
Redanz P, Fleck NA, McMeeking RM. International Journal of Fracture. 88: 187-202. DOI: 10.1023/A:1007453228249 |
0.454 |
|
1997 |
BEGLEY M, COX B, McMEEKING R. CREEP CRACK GROWTH WITH SMALL SCALE BRIDGING IN CERAMIC MATRIX COMPOSITES Acta Materialia. 45: 2897-2909. DOI: 10.1016/S1359-6454(96)00364-3 |
0.399 |
|
1996 |
Bao G, McMeeking RM. Fatigue Cracking in Fiber-Reinforced Metal Matrix Composites Under Mechanical and Thermal Loads Journal of Engineering For Gas Turbines and Power. 118: 416-423. DOI: 10.1115/1.2816606 |
0.406 |
|
1996 |
Evans AG, Zok FW, McMeeking RM, Du ZZ. Models of High-Temperature, Environmentally Assisted Embrittlement in Ceramic-Matrix Composites Journal of the American Ceramic Society. 79: 2345-2352. DOI: 10.1111/J.1151-2916.1996.Tb08982.X |
0.407 |
|
1996 |
Casagranda A, Xu J, Evans AG, McMeeking RM. Pressure Consolidation of Fiber‐Reinforced Oxide Matrix Composites: Experiments and Simulations Journal of the American Ceramic Society. 79: 1265-1272. DOI: 10.1111/J.1151-2916.1996.Tb08583.X |
0.365 |
|
1995 |
Leung D, Zhang N, McMeeking R, Evans A. Crack progression and interface debonding in brittle/ductile nanoscale multilayers Journal of Materials Research. 10: 1958-1968. DOI: 10.1557/Jmr.1995.1958 |
0.338 |
|
1995 |
Lynch CS, Chen L, Suo Z, Mcmeeking RM, Yang W. Crack Growth in Ferroelectric Ceramics Driven by Cyclic Polarization Switching Journal of Intelligent Material Systems and Structures. 6: 191-198. DOI: 10.1177/1045389X9500600206 |
0.389 |
|
1995 |
Lynch CS, Yang W, Collier L, Suo Z, McMeeking RM. Electric field induced cracking in ferroelectric ceramics Ferroelectrics. 166: 11-30. DOI: 10.1080/00150199508223569 |
0.378 |
|
1995 |
Begley M, Cox B, McMeeking R. Time dependent crack growth in ceramic matrix composites with creeping fibers Acta Metallurgica Et Materialia. 43: 3927-3936. DOI: 10.1016/0956-7151(95)00103-3 |
0.383 |
|
1995 |
Hwang SC, Lynch CS, McMeeking RM. Ferroelectric/ferroelastic interactions and a polarization switching model Acta Metallurgica Et Materialia. 43: 2073-2084. DOI: 10.1016/0956-7151(94)00379-V |
0.388 |
|
1995 |
Evans AG, Zok FW, McMeeking RM. Fatigue of ceramic matrix composites Acta Metallurgica Et Materialia. 43: 859-875. DOI: 10.1016/0956-7151(94)00304-Z |
0.382 |
|
1995 |
Begley M, McMeeking R. Numerical analysis of fibre bridging and fatigue crack growth in metal matrix composite materials Materials Science and Engineering: A. 200: 12-20. DOI: 10.1016/0921-5093(95)07015-X |
0.399 |
|
1995 |
Begley M, McMeeking R. Fatigue crack growth with fiber failure in metal-matrix composites Composites Science and Technology. 53: 365-382. DOI: 10.1016/0266-3538(95)00009-7 |
0.4 |
|
1995 |
Du Z, McMeeking R, Schmauder S. Transverse yielding and matrix flow past the fibers in metal matrix composites Mechanics of Materials. 21: 159-167. DOI: 10.1016/0167-6636(95)00005-4 |
0.354 |
|
1995 |
Kim KT, McMeeking RM. Power law creep with interface slip and diffusion in a composite material Mechanics of Materials. 20: 153-164. DOI: 10.1016/0167-6636(94)00055-7 |
0.346 |
|
1995 |
Bao G, McMeeking RM. Thermomechanical fatigue cracking in fiber reinforced metal-matrix composites Journal of the Mechanics and Physics of Solids. 43: 1433-1460. DOI: 10.1016/0022-5096(95)00040-P |
0.407 |
|
1995 |
Du Z, McMeeking R. Creep models for metal matrix composites with long brittle fibers Journal of the Mechanics and Physics of Solids. 43: 701-726. DOI: 10.1016/0022-5096(95)00007-6 |
0.34 |
|
1995 |
Begley M, Evans A, McMeeking R. Creep rupture in ceramic matrix composites with creeping fibers Journal of the Mechanics and Physics of Solids. 43: 727-740. DOI: 10.1016/0022-5096(95)00006-5 |
0.398 |
|
1995 |
Xu J, McMeeking R. Finite element simulation of powder consolidation in the formation of fiber reinforced composite materials International Journal of Mechanical Sciences. 37: 883-897. DOI: 10.1016/0020-7403(94)E0093-X |
0.384 |
|
1994 |
Zahl DB, Schmauder S, McMeeking RM. Mechanical behavior of residually stressed composites with ductile and brittle constituents Modelling and Simulation in Materials Science and Engineering. 2: 267-276. DOI: 10.1088/0965-0393/2/2/007 |
0.454 |
|
1994 |
Lynch CS, Mcmeeking RM. Finite strain ferroelectric constitutive laws Ferroelectrics. 160: 177-184. DOI: 10.1080/00150199408007707 |
0.329 |
|
1994 |
Zahl D, Schmauder S, McMeeking R. Transverse strength of metal matrix composites reinforced with strongly bonded continuous fibers in regular arrangements Acta Metallurgica Et Materialia. 42: 2983-2997. DOI: 10.1016/0956-7151(94)90395-6 |
0.349 |
|
1994 |
Bao G, McMeeking RM. Fatigue crack growth in fiber-reinforced metal-matrix composites Acta Metallurgica Et Materialia. 42: 2415-2425. DOI: 10.1016/0956-7151(94)90320-4 |
0.389 |
|
1994 |
Sofronis P, McMeeking RM. The effect of interface diffusion and slip on the creep resistance of particulate composite materials Mechanics of Materials. 18: 55-68. DOI: 10.1016/0167-6636(94)90006-X |
0.645 |
|
1994 |
Jefferson G, Bassani JL, Xu J, McMeeking RM. Densification by plastic deformation around spherical inclusions International Journal of Solids and Structures. 31: 3059-3077. DOI: 10.1016/0020-7683(94)90041-8 |
0.342 |
|
1993 |
McMeeking RM. Power law creep of a composite material containing discontinuous rigid aligned fibers International Journal of Solids and Structures. 30: 1807-1823. DOI: 10.1016/0020-7683(93)90235-Y |
0.313 |
|
1992 |
Sofronis P, McMeeking RM. Creep of Power-Law Material Containing Spherical Voids Journal of Applied Mechanics. 59: S88-S95. DOI: 10.1115/1.2899512 |
0.673 |
|
1992 |
McMeeking R, Kuhn L. A diffusional creep law for powder compacts Acta Metallurgica Et Materialia. 40: 961-969. DOI: 10.1016/0956-7151(92)90073-N |
0.369 |
|
1992 |
Fleck N, Kuhn L, McMeeking R. Yielding of metal powder bonded by isolated contacts Journal of the Mechanics and Physics of Solids. 40: 1139-1162. DOI: 10.1016/0022-5096(92)90064-9 |
0.374 |
|
1992 |
Xu J, McMeeking R. An analysis of the can effect in an isostatic pressing of copper powder International Journal of Mechanical Sciences. 34: 167-174. DOI: 10.1016/0020-7403(92)90081-Q |
0.392 |
|
1992 |
McMeeking R. The analysis of shape change during isostatic pressing International Journal of Mechanical Sciences. 34: 53-62. DOI: 10.1016/0020-7403(92)90053-J |
0.306 |
|
1992 |
Kuhn L, McMeeking R. Power-law creep of powder bonded by isolated contacts International Journal of Mechanical Sciences. 34: 563-573. DOI: 10.1016/0020-7403(92)90031-B |
0.396 |
|
1991 |
Kuhn LT, McMeeking RM, Lange FF. A Model for Power Consolidation Journal of the American Ceramic Society. 74: 682-685. DOI: 10.1111/J.1151-2916.1991.Tb04083.X |
0.344 |
|
1991 |
Evans A, Hutchinson J, McMeeking R. Stress-strain behavior of metal matrix composites with discontinuous reinforcements Scripta Metallurgica Et Materialia. 25: 3-8. DOI: 10.1016/0956-716X(91)90344-Z |
0.346 |
|
1991 |
Zahl D, McMeeking R. The influence of residual stress on the yielding of metal matrix composites Acta Metallurgica Et Materialia. 39: 1117-1122. DOI: 10.1016/0956-7151(91)90199-B |
0.437 |
|
1991 |
Bao G, Hutchinson J, McMeeking R. Particle reinforcement of ductile matrices against plastic flow and creep Acta Metallurgica Et Materialia. 39: 1871-1882. DOI: 10.1016/0956-7151(91)90156-U |
0.422 |
|
1991 |
Hom CL, McMeeking RM. Plastic flow in ductile materials containing a cubic array of rigid spheres International Journal of Plasticity. 7: 255-274. DOI: 10.1016/0749-6419(91)90035-W |
0.434 |
|
1991 |
Bao G, Hutchinson J, McMeeking R. The flow stress of dual-phase, non-hardening solids Mechanics of Materials. 12: 85-94. DOI: 10.1016/0167-6636(91)90056-6 |
0.372 |
|
1991 |
McMeeking R. Consolidation of powder to form a matrix around fibers in composite materials Mechanics of Materials. 12: 185-190. DOI: 10.1016/0167-6636(91)90016-S |
0.33 |
|
1990 |
Bao G, Genna F, Hutchinson JW, Mcmeeking RM. Models for the Strength of Ductile Matrix Composites Mrs Proceedings. 194. DOI: 10.1557/Proc-194-3 |
0.368 |
|
1990 |
Charalambides PG, Mataga PA, McMeeking RM, Evans AG. Steady-State Mechanics of a Growing Crack Paralleling an Elastically Constrained Thin Ductile Layer Applied Mechanics Reviews. 43. DOI: 10.1115/1.3120824 |
0.351 |
|
1990 |
Klipfel Y, He M, McMeeking R, Evans A, Mehrabian R. The processing and mechanical behavior of an aluminum matrix composite reinforced with short fibers Acta Metallurgica Et Materialia. 38: 1063-1074. DOI: 10.1016/0956-7151(90)90179-K |
0.351 |
|
1990 |
McMeeking R, Evans A. Matrix fatigue cracking in fiber composites Mechanics of Materials. 9: 217-227. DOI: 10.1016/0167-6636(90)90004-Y |
0.384 |
|
1990 |
Hom CL, McMeeking RM. Numerical results for transformation toughening in ceramics International Journal of Solids and Structures. 26: 1211-1223. DOI: 10.1016/0020-7683(90)90057-3 |
0.42 |
|
1990 |
McMeeking RM. A for the analysis of electrically induced mechanical stress at cracks in elastic dielectrics International Journal of Engineering Science. 28: 605-613. DOI: 10.1016/0020-7225(90)90089-2 |
0.435 |
|
1990 |
Hom CL, McMeeking RM. Large crack tip opening in thin elastic-plastic sheets International Journal of Fracture. 45: 103-122. DOI: 10.1007/Bf00037169 |
0.434 |
|
1990 |
McMeeking RM, Hom CL. Finite element analysis of void growth in elastic-plastic materials International Journal of Fracture. 42: 1-19. DOI: 10.1007/Bf00018610 |
0.468 |
|
1989 |
Aravas N, McMeeking RM. An Asymptotic Analysis of Three-Dimensional Extrusion Journal of Applied Mechanics. 56: 519-526. DOI: 10.1115/1.3176121 |
0.343 |
|
1989 |
Hom CL, McMeeking RM. Void Growth in Elastic-Plastic Materials Journal of Applied Mechanics. 56: 309-317. DOI: 10.1115/1.3176085 |
0.427 |
|
1989 |
Charalambides PG, Lund J, Evans AG, McMeeking RM. A Test Specimen for Determining the Fracture Resistance of Bimaterial Interfaces Journal of Applied Mechanics. 56: 77-82. DOI: 10.1115/1.3176069 |
0.723 |
|
1989 |
Hom CL, McMeeking RM. Three-dimensional void growth before a blunting crack tip Journal of the Mechanics and Physics of Solids. 37: 395-415. DOI: 10.1016/0022-5096(89)90006-9 |
0.445 |
|
1989 |
Sofronis P, McMeeking RM. Numerical analysis of hydrogen transport near a blunting crack tip Journal of the Mechanics and Physics of Solids. 37: 317-350. DOI: 10.1016/0022-5096(89)90002-1 |
0.65 |
|
1989 |
Matos PPL, McMeeking RM, Charalambides PG, Drory MD. A method for calculating stress intensities in bimaterial fracture International Journal of Fracture. 40: 235-254. DOI: 10.1007/Bf00963659 |
0.722 |
|
1989 |
McMeeking RM. Electrostrictive stresses near crack-like flaws Zamp Journal of Applied Mathematics and Physics. 40: 615-627. DOI: 10.1007/Bf00945867 |
0.452 |
|
1989 |
Hom CL, Mataga PA, McMeeking RM. Some recent developments in numerical modelling of fracture toughness in brittle matrix composites International Journal For Numerical Methods in Engineering. 27: 233-255. DOI: 10.1002/Nme.1620270203 |
0.448 |
|
1988 |
CHARALAMBIDES PG, McMEEKING RM. Near‐Tip Mechanics of Stress‐Induced Microcracking in Brittle Materials Journal of the American Ceramic Society. 71: 465-472. DOI: 10.1111/J.1151-2916.1988.Tb05896.X |
0.729 |
|
1988 |
Sigl L, Mataga P, Dalgleish B, McMeeking R, Evans A. On the toughness of brittle materials reinforced with a ductile phase Acta Metallurgica. 36: 945-953. DOI: 10.1016/0001-6160(88)90149-6 |
0.358 |
|
1987 |
McMeeking RM. On mechanical stresses at cracks in dielectrics with application to dielectric breakdown Journal of Applied Physics. 62: 3116-3122. DOI: 10.1063/1.339361 |
0.456 |
|
1987 |
Charalambides PG, McMeeking RM. Finite element method simulation of crack propagation in a brittle microcracking solid Mechanics of Materials. 6: 71-87. DOI: 10.1016/0167-6636(87)90023-8 |
0.734 |
|
1987 |
Rühle M, Evans AG, McMeeking RM, Charalambides PG, Hutchinson JW. Microcrack toughening in alumina/zirconia Acta Metallurgica. 35: 2701-2710. DOI: 10.1016/0001-6160(87)90269-0 |
0.695 |
|
1986 |
Hsueh C, Evans AG, Mcmeeking RM. Influence of Multiple Heterogeneities on Sintering Rates Journal of the American Ceramic Society. 69: C-64-C-66. DOI: 10.1111/J.1151-2916.1986.Tb04752.X |
0.328 |
|
1986 |
McMeeking RM, Johnson RE. On the Mechanics of Surging Glaciers Journal of Glaciology. 32: 120-132. DOI: 10.1017/S0022143000006948 |
0.373 |
|
1986 |
Aravas N, McMeeking RM. Stress intensity factors for slightly kinked, partially closed cracks in compression International Journal of Solids and Structures. 22: 1279-1292. DOI: 10.1016/0020-7683(86)90081-8 |
0.38 |
|
1986 |
Evans A, McMeeking R. On the toughening of ceramics by strong reinforcements Acta Metallurgica. 34: 2435-2441. DOI: 10.1016/0001-6160(86)90146-X |
0.392 |
|
1985 |
Aravas N, McMeeking RM. Finite Element Analysis Of Void Growth Near A Blunting Crack Tip Journal of the Mechanics and Physics of Solids. 33: 25-49. DOI: 10.1016/0022-5096(85)90020-1 |
0.402 |
|
1985 |
Aravas N, McMeeking RM. Microvoid growth and failure in the ligament between a hole and a blunt crack tip International Journal of Fracture. 29: 21-38. DOI: 10.1007/Bf00020674 |
0.415 |
|
1984 |
McMeeking RM. Estimates of the J-Integral for Elastic-Plastic Specimens in Large Scale Yielding Journal of Engineering Materials and Technology-Transactions of the Asme. 106: 278-284. DOI: 10.1115/1.3225715 |
0.412 |
|
1984 |
McMEEKING RM. Estimates for the Constitutive Moduli of Ductile Materials Containing a Small Volume Fraction of Voids or Inclusions Studies in Applied Mechanics. 6: 275-288. DOI: 10.1016/B978-0-444-42169-2.50023-1 |
0.323 |
|
1984 |
Lam PS, McMeeking RM. Analyses of steady quasistatic crack growth in plane strain tension in elastic-plastic materials with non-isotropic hardening Journal of the Mechanics and Physics of Solids. 32: 395-414. DOI: 10.1016/0022-5096(84)90022-X |
0.452 |
|
1982 |
McMEEKING RM, EVANS A. Mechanics of Transformation-Toughening in Brittle Materials Journal of the American Ceramic Society. 65: 242-246. DOI: 10.1111/J.1151-2916.1982.Tb10426.X |
0.438 |
|
1982 |
McMeeking RM. The finite strain tension torsion test of a thin-walled tube of elastic-plastic material International Journal of Solids and Structures. 18: 199-204. DOI: 10.1016/0020-7683(82)90002-6 |
0.379 |
|
1980 |
Lee EH, McMeeking RM. Concerning elastic and plastic components of deformation International Journal of Solids and Structures. 16: 715-721. DOI: 10.1016/0020-7683(80)90013-X |
0.377 |
|
1979 |
McMeeking R, Parks D. On criteria for J-dominance of crack-tip fields in large-scale yielding Astm Special Technical Publications. 175-194. DOI: 10.1520/Stp35830S |
0.626 |
|
1979 |
Rice JR, McMeeking RM, Parks DM, Sorensen EP. Recent finite element studies in plasticity and fracture mechanics Computer Methods in Applied Mechanics and Engineering. 17: 411-442. DOI: 10.1016/0045-7825(79)90026-4 |
0.7 |
|
1977 |
McMeeking RM. Blunting of a Plane Strain Crack Tip Into a Shape With Vertices Journal of Engineering Materials and Technology-Transactions of the Asme. 99: 290-297. DOI: 10.1115/1.3443543 |
0.403 |
|
1977 |
McMeeking RM. Finite deformation analysis of crack-tip opening in elastic-plastic materials and implications for fracture Journal of the Mechanics and Physics of Solids. 25: 357-381. DOI: 10.1016/0022-5096(77)90003-5 |
0.446 |
|
1976 |
Paris P, McMeeking R, Tada H. The Weight Function Method for Determining Stress Intensity Factors Astm Special Technical Publications. 471-489. DOI: 10.1520/Stp28659S |
0.374 |
|
1975 |
McMeeking RM, Rice JR. Finite-element formulations for problems of large elastic-plastic deformation International Journal of Solids and Structures. 11: 601-616. DOI: 10.1016/0020-7683(75)90033-5 |
0.551 |
|
1975 |
Paris PC, McMeeking RM. Efficient finite element methods for stress intensity factors using weight functions International Journal of Fracture. 11: 354-358. DOI: 10.1007/Bf00038904 |
0.32 |
|
1975 |
McMeeking RM, Paris PC. Response: Discussion of "efficient finite element methods for stress intensity factors using weight functions," by R. C. Labbens International Journal of Fracture. 11: 1059. DOI: 10.1007/Bf00033856 |
0.3 |
|
Show low-probability matches. |