☰

Sangkee Min, Ph.D. - Publications

Affiliations: 
2001 University of California, Berkeley, Berkeley, CA, United States 
Area:
Mechanical Engineering
Tree Info Similar researchers PubMed Report error

37 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Glaeser A, Selvaraj V, Lee K, Lee N, Hwang Y, Lee S, Lee S, Min S. Remote machine mode detection in cold forging using vibration signal Procedia Manufacturing. 48: 908-914. DOI: 10.1016/J.Promfg.2020.05.129  0.379
2020 Maeng S, Min S. Dry Ultra-Precision Machining of Tungsten Carbide with Patterned nano PCD Tool Procedia Manufacturing. 48: 452-456. DOI: 10.1016/J.Promfg.2020.05.068  0.449
2020 Maeng S, Min S. Simultaneous geometric error identification of rotary axis and tool setting in an ultra-precision 5-axis machine tool using on-machine measurement Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 63: 94-104. DOI: 10.1016/J.Precisioneng.2020.01.007  0.377
2020 Kwon SB, Nagaraj A, Yoon H, Min S. Study of material removal behavior on R-plane of sapphire during ultra-precision machining based on modified slip-fracture model Nanotechnology and Precision Engineering. DOI: 10.1016/J.Npe.2020.07.001  0.354
2020 Yoon H, Kwon SB, Nagaraj A, Min S. Effect of the initial-flaw on crack-propagation in two-step cutting of monocrystalline sapphire Journal of Manufacturing Processes. 56: 1211-1218. DOI: 10.1016/J.Jmapro.2020.06.017  0.426
2020 Maeng S, Lee PA, Kim BH, Min S. An Analytical Model for Grinding Force Prediction in Ultra-Precision Machining of WC with PCD Micro Grinding Tool International Journal of Precision Engineering and Manufacturing-Green Technology. 1-15. DOI: 10.1007/S40684-020-00199-2  0.439
2020 Chen Q, Maeng S, Li W, Zhou Z, Min S. Geometric- and force-induced errors compensation and uncertainty analysis of rotary axis in 5-axis ultra-precision machine tool The International Journal of Advanced Manufacturing Technology. 109: 841-856. DOI: 10.1007/S00170-020-05670-7  0.408
2019 Nagaraj A, Kwon SB, Yoon H, Min S. Crack removal behavior in ultra-precision machining of sapphire Procedia Manufacturing. 34: 393-398. DOI: 10.1016/J.Promfg.2019.06.183  0.396
2019 Yoon H, Lee J, Kim M, Kim E, Shin Y, Kim S, Min S, Ahn S. Power Consumption Assessment of Machine Tool Feed Drive Units International Journal of Precision Engineering and Manufacturing-Green Technology. 7: 455-464. DOI: 10.1007/S40684-019-00063-Y  0.376
2019 Yoon H, Kwon SB, Nagaraj A, Min S. Investigation of the Ductile Cutting Behavior of Monocrystalline Yttria-Stabilized Zirconia During Ultra-Precision Orthogonal Cutting International Journal of Precision Engineering and Manufacturing. 20: 1475-1484. DOI: 10.1007/S12541-019-00150-9  0.409
2018 Yoon H, Lee S, Min S. Investigation of ductile-brittle transition in machining of yttrium-stabilized zirconia (YSZ) Procedia Manufacturing. 26: 446-453. DOI: 10.1016/J.Promfg.2018.07.052  0.408
2018 Maas P, Mizumoto Y, Kakinuma Y, Min S. Anisotropic brittle-ductile transition of monocrystalline sapphire during orthogonal cutting and nanoindentation experiments Nanotechnology and Precision Engineering. 1: 157-171. DOI: 10.1016/J.Npe.2018.09.005  0.367
2018 Yoon H, Singh E, Min S. Empirical power consumption model for rotational axes in machine tools Journal of Cleaner Production. 196: 370-381. DOI: 10.1016/J.Jclepro.2018.06.028  0.329
2018 Yoon H, Kwon SB, Nagaraj A, Lee S, Min S. Study of stress intensity factor on the anisotropic machining behavior of single crystal sapphire Cirp Annals-Manufacturing Technology. 67: 125-128. DOI: 10.1016/J.Cirp.2018.04.114  0.324
2018 Jackson MA, Asten AV, Morrow JD, Min S, Pfefferkorn FE. Energy Consumption Model for Additive-Subtractive Manufacturing Processes with Case Study International Journal of Precision Engineering and Manufacturing-Green Technology. 5: 459-466. DOI: 10.1007/S40684-018-0049-Y  0.378
2018 Lee G, Kim M, Quan Y, Kim M, Kim TJY, Yoon H, Min S, Kim D, Mun J, Oh JW, Choi IG, Kim C, Chu W, Yang J, Bhandari B, et al. Machine health management in smart factory: A review Journal of Mechanical Science and Technology. 32: 987-1009. DOI: 10.1007/S12206-018-0201-1  0.34
2017 Yoon HS, Lee HT, Jang KH, Kim CS, Park H, Kim DW, Lee K, Min S, Ahn SH. CAD/CAM for scalable nanomanufacturing: A network-based system for hybrid 3D printing. Microsystems & Nanoengineering. 3: 17072. PMID 31057888 DOI: 10.1038/Micronano.2017.72  0.318
2017 Mizumoto Y, Maas P, Kakinuma Y, Min S. Investigation of the cutting mechanisms and the anisotropic ductility of monocrystalline sapphire Cirp Annals-Manufacturing Technology. 66: 89-92. DOI: 10.1016/J.Cirp.2017.04.018  0.331
2017 Maas P, Mizumoto Y, Kakinuma Y, Min S. Machinability Study of Single-Crystal Sapphire in a Ball-End Milling Process International Journal of Precision Engineering and Manufacturing. 18: 109-114. DOI: 10.1007/S12541-017-0013-8  0.458
2016 Jackson MA, Asten AV, Morrow JD, Min S, Pfefferkorn FE. A Comparison of Energy Consumption in Wire-based and Powder-based Additive-subtractive Manufacturing Procedia Manufacturing. 5: 989-1005. DOI: 10.1016/J.Promfg.2016.08.087  0.369
2016 Chu WS, Kim MS, Jang KH, Song JH, Rodrigue H, Chun DM, Cho YT, Ko SH, Cho KJ, Cha SW, Min S, Jeong SH, Jeong H, Lee CM, Chu CN, et al. From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift International Journal of Precision Engineering and Manufacturing - Green Technology. 3: 209-222. DOI: 10.1007/S40684-016-0028-0  0.311
2012 Behrendt T, Zein A, Min S. Development of an energy consumption monitoring procedure for machine tools Cirp Annals-Manufacturing Technology. 61: 43-46. DOI: 10.1016/J.Cirp.2012.03.103  0.4
2011 Inada A, Min S, Ohmori H. Micro cutting of ferrous materials using diamond tool under ionized coolant with carbon particles Cirp Annals - Manufacturing Technology. 60: 97-100. DOI: 10.1016/J.Cirp.2011.03.089  0.356
2011 Min S, Lidde J, Raue N, Dornfeld D. Acoustic emission based tool contact detection for ultra-precision machining Cirp Annals-Manufacturing Technology. 60: 141-144. DOI: 10.1016/J.Cirp.2011.03.079  0.584
2010 Inada A, Ohmori H, Min S, Dornfeld D. Investigation of the Effects of an Electrolytic Coolant with a Nano Carbon Additive in Diamond Micro Cutting on Ferrous Materials Journal of Advanced Mechanical Design Systems and Manufacturing. 4: 1076-1083. DOI: 10.1299/Jamdsm.4.1076  0.566
2010 Dornfeld D, Min S. A Review of Burr Formation in Machining Laboratory For Manufacturing and Sustainability. 3-11. DOI: 10.1007/978-3-642-00568-8_1  0.597
2009 Aurich JC, Dornfeld D, Arrazola PJ, Franke V, Leitz L, Min S. Burrs—Analysis, control and removal Cirp Annals-Manufacturing Technology. 58: 519-542. DOI: 10.1016/J.Cirp.2009.09.004  0.593
2008 Childs THC, Dornfeld D, Lee D-, Min S, Sekiya K, Tezuka R, Yamane Y. The influence of cutting edge sharpness on surface finish in facing with round nosed cutting tools Cirp Journal of Manufacturing Science and Technology. 1: 70-75. DOI: 10.1016/J.Cirpj.2008.09.001  0.62
2008 Childs THC, Sekiya K, Tezuka R, Yamane Y, Dornfeld D, Lee DE, Min S, Wright PK. Surface finishes from turning and facing with round nosed tools Cirp Annals - Manufacturing Technology. 57: 89-92. DOI: 10.1016/J.Cirp.2008.03.121  0.621
2008 Min S, Sangermann H, Mertens C, Dornfeld D. A study on initial contact detection for precision micro-mold and surface generation of vertical side walls in micromachining Cirp Annals-Manufacturing Technology. 57: 109-112. DOI: 10.1016/J.Cirp.2008.03.068  0.59
2006 Min S, Dornfeld D, Inasaki I, Ohmori H, Lee D, Deichmueller M, Yasuda T, Niwa K. Variation in Machinability of Single Crystal Materials in Micromachining Cirp Annals. 55: 103-106. DOI: 10.1016/S0007-8506(07)60376-X  0.597
2006 Dornfeld D, Min S, Takeuchi Y. Recent Advances in Mechanical Micromachining Cirp Annals-Manufacturing Technology. 55: 745-768. DOI: 10.1016/J.Cirp.2006.10.006  0.623
2005 Min S, Inasaki I, Fujimura S, Wada T, Suda S, Wakabayashi T. A study on tribology in minimal quantity lubrication cutting Cirp Annals. 54: 105-108. DOI: 10.1016/S0007-8506(07)60060-2  0.392
2003 Min S, Dornfeld DA, Nakao Y. Influence of Exit Surface Angle on Drilling Burr Formation Journal of Manufacturing Science and Engineering-Transactions of the Asme. 125: 637-644. DOI: 10.1115/1.1596573  0.553
2001 Min S, Dornfeld DA, Kim J, Shyu B. Finite element modeling of burr formation in metal cutting Machining Science and Technology. 5: 307-322. DOI: 10.1081/Mst-100108617  0.538
2001 Min S, Kim J, Dornfeld DA. Development of a drilling burr control chart for low alloy steel, AISI 4118 Journal of Materials Processing Technology. 113: 4-9. DOI: 10.1016/S0924-0136(01)00589-1  0.585
2001 Kim J, Min S, Dornfeld DA. Optimization and control of drilling burr formation of AISI 304L and AISI 4118 based on drilling burr control charts International Journal of Machine Tools & Manufacture. 41: 923-936. DOI: 10.1016/S0890-6955(00)00131-0  0.584
Show low-probability matches.